PAGE: 1 of 5 TEST REPORT APPLICANT : CSP INC ADDRESS : 8248 W. ORANGE DR GLENDALE, AZ 85303 USA SAMPLE DESCRIPTION : LIP GLOSS STYLE / ITEM NO. : K3-203 BUYER : KIDS' KORNER AGE REQUESTED ON APPLICATION FORM : 3+ SAMPLE RECEIVED DATE : APR. 22, 2014 TEST PERIOD : APR. 23, 2014 TO APR. 30, 2014 RESULT SUMMARY : TEST REQUESTED - Total Lead Content in accordance with ASTM F963-11 Standard Consumer Safety Specification for Toy Safety. - Total Lead Content according to US Consumer Product Safety Improvement Act 2008 (CPSIA). RESULT PASS PASS - As specified by client, to determine the microbial tests in the submitted sample. Please refer to next page(s). ********************FOR FURTHER DETAILS, PLEASE REFER TO THE FOLLOWING PAGE(S)****************** SIGNED FOR AND ON BEHALF OF EUROFINS TESTING TECHNOLOGY (SHENZHEN) CO. LTD. Harry Chen Inorganic Team Supervisor Coco Luo Organic Team Supervisor This test report is valid for the tested samples only. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any safety mark on this or similar products.
PAGE: 2 of 5 Material list Testing material No. Component Material Colour 1 Brush Plastic White 2 Lip gloss Gel Pink 3 Lip gloss Gel Purple 4 Lip gloss Gel Blue ASTM F963-11 4.3.5.2(2)(a), Total Lead Content in Accessible Component Parts Test method : CPSC-CH-E1002-08.3 The sample was digested with acid. Then the lead content was determined by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Limit : 100 mg/kg according to ASTM F963-11 Standard Consumer Safety Specification for Toy Safety. Detection Limit : 10 mg/kg Test No. Material No. Test result (mg/kg) Pb-1 1 N.D. Pb-2 2 N.D. Pb-3 3 N.D. Pb-4 4 N.D. Note: - 1 mg/kg = 1 ppm = 0.0001% - N.D. = Not Detected
PAGE: 3 of 5 Total Lead Content(CPSIA) Test method : CPSC-CH-E1002-08.3 The sample was digested with acid. Then the lead content was determined by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Limit 100 ppm - according to US Consumer Product Safety Improvement Act 2008 (CPSIA Sec.101). Detection limit : 10 ppm Test No. Material No. Test result (ppm) Pb-1 1 N.D. Pb-2 2 N.D. Pb-3 3 N.D. Pb-4 4 N.D. Note: - 1 mg/kg = 1 ppm = 0.0001% - N.D. = Not Detected
PAGE: 4 of 5 Microbiological Assessment Test method : United States Pharmacopeia (USP32-NF27), Microbiological Test: <61>- Microbiological examination of nonsterile products: Microbial enumeration tests, and Microbiological Tests: <62>-Microbiological examination of nonsterile products: tests for specified microorganisms. Test result : Test material No. 3 Item(s) Test result (#) Recommended Limit (*1) Unit Conclusion (*2) Total aerobic microbial count (TAMC) <10 / CFU/g / Total combined yeasts and mould count (TYMC) <10 / CFU/g / TAMC+TYMC <10 5000 CFU/g Pass Bile-tolerant gram-negative bacteria Absent Absent /g Pass Escherichia coli Absent Absent /g Pass Salmonella Absent Absent /10g Pass Pseudomonas aeruginosa Absent Absent /g Pass Staphylococcus aureus Absent Absent /g Pass Clostridia Absent Absent /g Pass Candida albicans Absent Absent /g Pass Note: 1. - CFU = Colony forming units - < = less than 2. (*1) Recommended limit: CTFA (U.S. Cosmetic, Toiletry and Fragrance Association) recommends the reporting of Total aerobic microbial count and Total combined molds and yeast count as the Total viable count. The common acceptance criteria employed in the toy and cosmetic industry are enumerated below for reference: Total Viable Count (TAMC+TYMC) Category Limit Recommended Acceptance limit Baby products 100 CFU/mL(g) 500 CFU/mL(g) Products for the area of the eye All Other products 1000 CFU/mL(g) 5000 CFU/mL(g) The inherent variability of a plate count should be taken into account; thus the limit recommended should be interpreted as follows: 100 maximum limit of acceptance is 500 CFU/mL(g) 1000 maximum limit of acceptance is 5000 CFU/mL(g). 3. (*2) Conclusion are based on the recommended limit. 4. (#) The result was subcontracted to lab: C014.
PAGE: 5 of 5 Other Information / Remark: According to the customer s requirement, the appointed materials have been tested. Photo Attachment LIP GLOSS ***END OF THE REPORT***