MATERIAL SAFETY DATA SHEET PRODUCT: Magellan XPA Universal

Similar documents
MATERIAL SAFETY DATA SHEET PRODUCT: Fortane One SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

Fortane MVS Ultra Moisture Vapor Urethane Membrane

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Calcium Carbonate Chalk -coarse 21um Product Code: EX-CA0035 Department: inert pigments & fillers C.A.S.: , ,

Barium Sulphate Pw21 Product Code: EX-SU0020 Department: inert pigments & fillers C.A.S.:

PRODUCT: Ethyl alcohol (denatured) CHEMICAL ABSTRACT NO.: Mixture. Ethyl alcohol ppm Flammable

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Dioctyl sulfosuccinate, % Not available Not available Not available

Material Safety Data Sheet. 1. Identification of the substance/preparation and of the company/undertaking

MSDS Number: D585.7A Revision Date: 16-Apr-08 Revision No.: 004. Page 1

Material Safety Data Sheet Buffer Solution ph 9.0. Section 1 - Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET Sodium Lignosulfonate

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

SAFETY DATA SHEET SECTION 1: PRODUCT IDENTIFICATION PRODUCT: Hand Sanitizer Product Label Name:

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Chemical Name: Wipes. Manufacturer: Kimtech. Container size: 280 wipes. Location: VLA. Disposal: Place empty container in trash.

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET SEACO TDA-12

MATERIAL SAFETY DATA SHEET

Alcohol Prep Pads (private label included) This product is intended for use as a skin antiseptic. It is for external use only.

CAS-No. EC-No. Index-No. Concentration [%] Paraformaldehyde

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

Product Identification. Hazard Overview

Material Safety Data Sheet

ALCONOX MSDS. Section 1: PRODUCT INFORMATION

M A T E R I A L S A F E T Y D A T A

Safety Data Sheet 1511BR

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Natural Enzymes Not Known 4-11 % Not established Not Established Not Established

Material Safety Data Sheet

Material Safety Data Sheet

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION

SAFETY DATA SHEET (SDS)

bis(diphenylphosphino)butane

Material Safety Data Sheet

: #1 Gray. Safety Data Sheet SECTION 1: IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

Material Safety Data Sheet

Material Safety Data Sheet WF1012N No-Toil Biodegradable Foam Filter Cleaner

Material Safety Data Sheet

Material Safety Data Sheet

[Polysorbate 80] Hazardous Ingredients (ingredient value): Polyoxyethylene Sorbitan Monooleate (Not established)

CAS-No. EC-No. Index-No. Concentration [%] Progesterone

M A T E R I A L S A F E T Y D A T A

SAFETY DATA SHEET WF32 OIL

: Corian Joint Adhesive Kit - Component A

: POWER SHOT UNI PRO BORIC INSECTICIDE DUST

Material Safety Data Sheet

Safety Data Sheet CITRA FORCE

Randolph Products Company, 33 Haynes Circle, Chicopee, MA 01020

Material Safety Data Sheet

SDS. GHS Safety Data Sheet. Wechem, Inc. Seek - A - Leak PRODUCT AND COMPANY IDENTIFICATION. Manufacturer HAZARDS IDENTIFICATION

EMERGENCY PHONE MATERIAL SAFETY DATA SHEET MP5405/5430/5445 PART A (RESIN)

Material Safety Data Sheet

SAFETY DATA SHEET (SDS)

Safety Data Sheet. 1. Identification. 2. Hazard Identification

Material Safety Data Sheet

EYEWASH STATION PRESERVATIVE

CAS-No. EC-No. Index-No. Concentration Ampicillin

SAFETY DATA SHEET (SDS) Acetate Buffer, ph 4.0 with Activator 01. Product and Company Identification

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECTION (2): HAZARDOUS INGREDIENTS Range % (by weight) SECTION (3): PHYSICAL DATA (Typical values. May vary from sample to sample)

SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

CAS-No. EC-No. Index-No. Concentration Dihydrogen wolframate

2002 =========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet Zinc sulfate, heptahydrate, ACS. Section 1 - Chemical Product and Company Identification

2.2 Label elements Hazard Pictograms: NA Signal Word: NA Hazard Statements: NA Precautionary Statements: NA. 2.3 Other hazards

Material Safety Data Sheet Cobalt oxide

Safety GHS. Signal Word None. Not Classified GHS Symbol(s) None. None Precautionary. Prevention. Storage. Disposal.

MATERIAL SAFETY DATA SHEET

Safety Data Sheet UCRETE MF HP HPQ PTB Revision date : 2011/06/21 Page: 1/7

Material Safety Data Sheet MSDS ID: SK-121B

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET 3111 / 3113 / Canutec (24 hours) 1. CHEMICAL PRODUCT AND COMPANY INFORMATION

: Benefect Botanical Impact Cleaner

Safety Data Sheet European Format

MATERIAL SAFETY DATA SHEET C437P VER 11-1 DATE: 10/4/11 SW

Ident-No: HARDENER HV 998

Safety Cleaning Wipes MATERIAL SAFETY DATA SHEET. Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

P-Tert-Butylbenzoic Acid

SPECTINOMYCIN DIHYDRCHLORIDE PENTAHYDRATE

SCRUBBING BUBBLES TOILET CLEANING GEL - CITRUS

Material Safety Data Sheet SunClean Concrete Tile Cleaner

Material Safety Data Sheet

Material Safety Data Sheet

1.4. Emergency telephone number : CHEM TEL: (24hr); Outside the US: (collect call)

Material Safety Data Sheet Material Name: Rust-B-Gone One Step Rust Remover

Safety data sheet NP2/SL2 BASF ACTIVATOR Revision date : 2009/01/22 Page: 1/6

Transcription:

Product: Chemical Family: Product Use: Manufacturer: SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Magellan XPA Universal Aromatic isocyanate Adhesive Magellan XPA P.O. Box 390425 Cambridge, MA 02139 Telephone Number: (617) 500-6512 In Emergency Only: CANUTEC Collect: (613) 996-6666 (24-hour hotline) Information: (613) 992-4624 Emergency Overview: Potential Health Effects: SECTION 2: HAZARDS IDENTIFICATION Beige coloured, thick liquid. Combustible. Harmful by inhalation. Harmful if swallowed. May cause eye, skin, and/or respiratory tract irritation. May cause skin and/or respiratory sensitization. Eyes Irritant. Skin Irritant. Sensitizer. Prolonged or repeated contact can lead to severe irritation. Inhalation Irritant. Sensitizer. Harmful by inhalation of isocyanate vapours. May cause breathlessness, chest discomfort and reduced pulmonary function. Ingestion Will cause adverse health effects. Chronic Effects Prolonged or repeated inhalation of isocyanate vapours can cause lung damage. Heating of the product can release additional vapours. This product should not be used without adequate ventilation. SECTION 3: HAZARDOUS INGREDIENT INFORMATION Ingredient % (W/W) CAS Number Polylmeric diphenylmethane diisocyanate 1-5 9016-87-9 Methylenediphenyl diisocyanate 1-5 26447-40-5 Diphenylmethane-4,4 -diisocyanate 1-5 101-68-8 Benzenesulfonyl Isocyanate,4-methyl 1-5 4083-64-1 Naphtha, heavy alkylate 1-5 64741-65-7 Eyes: SECTION 4: FIRST AID MEASURES Flush open eyes with water for 15 minutes. Seek immediate medical attention. Page 1 of 5

Skin: Inhalation: Ingestion: Flammable Properties: Extinguishing Media: Hazardous Combustion Products: Protection of Fire Fighters: Remove affected clothing. Wash skin with soap and water immediately. Wash contaminated clothing before re-use. Seek medical attention if irritation occurs. Move to fresh air. Administer oxygen if necessary. Seek immediate medical attention. Do not induce vomiting. Give at least two glasses of milk or water. Never give anything by mouth to an unconscious person. Seek medical attention immediately. SECTION 5: FIRE FIGHTING MEASURES Material is combustible: isolate from heat, open flame and sparks. CO 2, chemical foam, dry chemical, water spray. Do not use water jet. CO, CO2 Self contained breathing apparatus and full protective clothing should be worn by fire fighters. SECTION 6: ACCIDENTAL RELEASE MEASURES Personal Precautions: Use personal protective equipment as recommended in Section 8. Environmental Do not empty into drains or discharge into the soil/subsoil. Precautions: Methods for Containment: Eliminate all ignition sources. Absorb with an inert material. Place in an opentop container and remove to a ventilated area. Allow to sit in an open container for 24 hours. Methods for Clean-Up: Flush area with water to remove trace residue. General Warning to Prevent Exposure: General Storage Information: SECTION 7: HANDLING AND STORAGE Do not breathe fumes or vapours. Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling. Keep containers tightly closed when not in use. Combustible. Handle and open containers with care. Store in tightly-sealed containers in a cool, dry area. Do not handle near open flames, heat or other ignition sources. Do not open containers until ready to use. Page 2 of 5

SECTION 8: EXPOSURE CONTROLS AND PERSONAL PROTECTION Ingredient Exposure Limit Unit Polymeric diphenylmethane diisocyanate 0.05 (TLV ACGIH) mg/m3 Methylenediphenyl diisocyanate Not established --- Diphenylmethane-4,4 -diisocyanate 0.005 (TWA ACGIH) ppm Benzenesulfonyl Isocyanate,4-methyl Not established --- Naphtha, heavy alkylate 525 (TLV ACGIH) mg/m3 Engineering Controls: Personal Protective Equipment: Appearance: Odour: Melting Point: Boiling Point: Flash Point and Method: Evaporation Rate (Butyl acetate = 1) Upper/Lower Flammable Limits: Vapour Pressure @ 25 C: Vapour Density: Specific Gravity @ 25 C: Solubility: Use local exhaust ventilation or other engineering controls to keep airborne levels below recommended exposure limits. Eyes: Safety glasses, chemical goggles. Skin: Chemical-resistant clothing, gloves and footwear. Inhalation: NIOSH-approved organic respirator if TLV is exceeded. Other: Eye bath and safety shower. SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Beige coloured liquid. >65 C (149 F) CC 1.55 g/ml SECTION 10: STABILITY AND REACTIVITY Page 3 of 5

PRODUCT: Magellan XPA Univeral Chemical Stability: Conditions to Avoid: Incompatible Materials: Hazardous Decomposition Products: Possibility of Hazardous Reactions: Stable Moisture, heat, sparks, ignition sources, vapour accumulation. Strong oxidizers, acids, bases. CO. CO Will not occur. SECTION 11: TOXICOLOGICAL INFORMATION Acute Dose Toxicity: Naphtha, heavy alkylate Oral LD 50 > 8000 mg/kg (rat) Dermal LD 50 > 4000 mg/kg (rabbit) Polymeric diphenylmethane Dermal LD 50 > 5000 mg/kg (rabbit) diisocyanate Benzenesulfonyl Isocyanate,4-methyl Oral LD 50 2234 mg/kg (rat) Repeated Dose Toxicity: Sensitization: May cause sensitization by skin contact or by inhalation. Carcinogenicity: Not listed Neurological Effects: Genetic Effects: Reproductive Effects: Developmental Effects: Target Organ Effects: Lungs chronic inhalation can cause respiratory distress and respiratory impairments SECTION 12: ECOLOGICAL INFORMATION Biodegradability SECTION 13: DISPOSAL CONSIDERATIONS Recover or recycle if possible. Uncured product is hazardous waste. Incinerate in accordance with federal, state, and local environmental controls/regulations. All provided information only applies to the material as supplied to the user. The characteristics outlined may not apply if the material has been used or otherwise contaminated. It is the responsibility of the user to determine the proper waste identification and disposal methods in compliance with applicable regulations. Page 4 of 5

US Regulations: Canadian Regulations: SECTION 14: TRANSPORT INFORMATION NOT REGULATED FOR TRANSPORTATION SECTION 15: REGULATORY INFORMATION All of the components of this material appear on the Toxic Substances Control Act (TSCA) inventory. As per WHMIS, this material is classified: B3, D2A, D2B All of the components of this material appear on the Domestic Substances List (DSL). This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required in the Controlled Products Regulations. SECTION 16: Other Information Abbreviations: Not established The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested method of application and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done at Magellan XPA. All technical assistance and information provided with respect to Magellan XPA's products is subject to Magellan s Terms and Conditions, including the limited warranty therein. Magellan XPA s Terms and Conditions appear on the reverse side of Magellan XPA s credit applications and invoices and are available upon your request. Except as expressly provided in the Terms and Conditions, Magellan XPA's excludes all express and implied warranties, representations, conditions and objections, whether statutory or otherwise, concerning the quality of the products of Magellan XPA's or their fitness for any particular purpose. It is expressly understood and agreed that the customer assumes and hereby expressly releases Magellan XPA's from all liability, in tort, contract, or otherwise, incurred in connection with the use of our products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind Magellan XPA. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent. Page 5 of 5