Filtek Silorane Low Shrink Posterior Restorative System The first composite to shrink less than 1 %
Filtek Silorane The first posterior composite to shrink less than 1% 1 Any time you restore a patient s tooth, you strive to achieve a perfect margin a smooth connection between the tooth structure and restoration without interruptions or gaps. Even if your technique is perfect, achieving lasting marginal integrity is a challenge because all composites shrink. Shrinkage is intrinsic to resin chemistry which is why, to date, no methacrylate-based composite has solved the shrinkage problem. Scientists at 3M ESPE changed the chemistry to deliver a solution. The Filtek Silorane Low Shrink Posterior Restorative is based on 3M ESPE s latest product innovation: silorane chemistry. This scientific breakthrough results in the lowest volumetric shrinkage to date. Excellent marginal integrity Strong and durable Easy to handle; nonsticky; excellent ability to hold shape Up to 9 minutes operatory light stability Low water sorption for substantially decreased exogenic staining Dedicated self-etch adhesive with excellent bond strength Available in 4 shades: A2, A3, B2, C2 (capsule or syringe) Radiopaque The new chemistry of the silorane-base composite requires the use of a dedicated self-etch adhesive. Why attaining an excellent margin is so important. To illustrate why this product-chemistry breakthrough is so important, we need to examine the clinical symptoms associated with volumetric shrinkage, polymerisation and marginal gaps. Filtek Silorane, along with 3M ESPE Silorane System Adhesive Self-Etch Primer and Bond, work together to reduce the risk of clinical problems illustrated to the right. marginal staining debonding microleakage secondary caries enamel micro-cracks post-operative sensitivity
When a composite is closer to no shrink than low shrink it deserves to be called a breakthrough! Shrinkage comparisons of Filtek Silorane Low Shrink Restorative and methacrylate composites using bonded disc method. Source: University of Manchester Revolutionary ring-opening Silorane chemistry has resulted in the FIRST composite to shrink less than 1%! Silorane chemistry is the basis for a new composite category breakthrough: Filtek Silorane Low Shrink Posterior Restorative. The illustration (left) demonstrates how the new silorane-based composite works at the molecular level to reduce shrinkage dramatically, compared to methacrylate-based composites. Silorane Volumetric Shrinkage <1% 1 As silorane-based composite polymerises, ring-opening monomers connect by opening, flattening and EXTENDING toward each other. The result is significantly less volumetric shrinkage compared to methacrylate-based composites. As methacrylate-based composites cure, the molecules of these linear monomers connect by actually SHIFTING closer together in a linear response. The result is a loss of volume. Methacrylate Volumetric Shrinkage 1 <1% volumetric shrinkage tested by bonded disc method. Restoration: Filtek Silorane Restoration: QuiXfil MPa Most 50 0 Least Finite element analysis images show how Filtek Silorane restorative helps to minimise problems caused by polymerisation. Note that the silorane restoration shows an absence of gray high- areas where enamel cracks and leakage in the margin can occur. Source: University of Minnesota
Finally, everything you want in a posterior restorative. You ll like the way it handles. Excellent operatory light stability up to 9 minutes working time Impressive nonstick and nonslumping qualities Very good initial adaptation to bond film allows easy placement Fast and easy to polish Available in capsule or syringe Silorane Graph shows excellent ambient light stability of Filtek Silorane Low Shrink Posterior Restorative, giving dentists up to 9 minutes to place and shape the restoration under full operatory light illumination. [Method: ISO 4049]* *Source: 3M ESPE internal data You ll like the way it bonds. Filtek Silorane Low Shrink Posterior Restorative and the Silorane System Adhesive are formulated to work together to address problems associated with polymerisation. You ll see great clinical outcomes with: Excellent marginal integrity Reduced risk of marginal gaps and microleakage Reduced risk of marginal staining Reduced risk of secondary caries Reduced cusp deflection Reduced risk of -induced enamel fracture Reduced risk of post-operative sensitivity Excellent marginal integrity Studies show the Filtek Silorane Restorative System provides better marginal integrity in mixed MOD restorations before and after chewing simulation as compared to leading methacrylate systems. [SEM analysis] Source: 3M ESPE internal data You ll like the way it lasts. When you select a composite for the posterior region, you want assurance it can stand up to flexural forces during chewing. Filtek Silorane Restorative is strong and durable to protect the filling from fractures, and to stabilise the tooth at the same time. Proven to have excellent compressive strength for -bearing restorations High flexural strength protects the tooth from fractures and stabilises it at the same time Wear resistant ACTA test data on file Clinically proven strength and durability Source: University Mainz Flexural strength of Filtek Silorane Low Shrink Posterior Restorative proves stronger than many clinically-proven composites, and is substantially above the ISO 4049 limit of 80 MPa. Source: 3M ESPE internal data
It s easy to use the Filtek Silorane Posterior Restorative System Here is a step-by-step guide on how to create a Filtek Silorane restoration. The procedure for using the low-shrinking Filtek Silorane composite and Silorane System Adhesive is much like the one you use with your current composite system. To achieve optimal strength of the Filtek Silorane system, it is important to light cure both the self-etch Primer and the Silorane System Adhesive Bond. A load-bearing posterior composite filling has to be replaced. Marginal loss and leakage have led to secondary caries. Select from four shades: A2, A3, B2, C2. A chameleon effect makes it easy to match composite shade to tooth enamel. Application of Silorane Self-Etch Primer. Agitate primer on cavity surface for 15 sec. Light cure for 10 sec after drying with oil-free air. Thixotropic properties allow for a precise application of Silorane Bond. Light cure for 10 sec after dispersing Silorane Bond to a homogeneous film with oil-free air. Very good initial adaptation of Filtek Silorane to bond film allows for an easy placement of the first increment. No need for a sophisticated layering technique due to intrinsically-low polymerisation shrinkage and! The non-sticky handling and the excellent ability to hold shape allow you to build strong contact points and create a natural occlusal shape under full operatory light! Light cure for 20 sec (LED, intensity 1000-1500 mw/cm 2 ) or 40 sec (LED 500-1000 mw/cm 2 or halogen 500-1400 mw/cm 2 ). Depth-of-cure: 2.5mm. Surface free of inhibition layer allows for a fast and easy polish. A strong and durable Filtek Silorane filling restored the tooth to its natural function. Natural-looking aesthetics were achieved with an easy single-shade technique. In any restoration, using proper technique is important. But ultimately, the clinical outcome depends equally on your choice of product. The new chemistry breakthrough of Filtek Silorane Posterior Restorative System makes it your best choice for durable posterior restorations and long-term patient satisfaction.
Filtek Silorane Posterior Composite System Dedicated bonding system: the base of your clinical success. The Filtek Silorane System combines the lowest-shrinking silorane-based composite with a dedicated, two-step, self-etching bonding system: 3M ESPE Silorane System Adhesive Self-Etch Primer and Bond. It offers excellent bond strength to enamel and dentine, and is the one and only adhesive formulated to provide optimal bonding with such an extraordinarily low-shrinking composite. Low polymerisation and excellent bond strength: the base of your clinical success. Bond strength Bond strength Polymerisation Conventional composite: adhesive and shrinkage forces work in strong opposition. Polymerisation NOTE: Filtek Silorane Low Shrink composite is formulated to work only with the Silorane System Adhesive. Silorane System Adhesive is not designed for use with other composites. Ordering Information Item # Product Information 4771TK Filtek Silorane Low Shrink Posterior Restorative Capsule Trial Kit Kit includes: 20 capsules 0.2g each, shade A3; 1 vial Primer 5ml; 1 vial Bond 5ml; 100 microbrushes (50 black, 50 green); 1 mixing well 4772TK Filtek Silorane Low Shrink Posterior Restorative Syringe Trial Kit Kit includes: 1 syringe 4g, shade A3; 1 vial Primer 5ml; 1 vial Bond 5ml; 100 microbrushes (50 black, 50 green); 1 mixing well 4771A2 Filtek Silorane Low Shrink Posterior Restorative Capsule Refill A2 20 capsules 0.2g each, shade A2 4771A3 Filtek Silorane Low Shrink Posterior Restorative Capsule Refill A3 20 capsules 0.2g each, shade A3 4771B2 Filtek Silorane Low Shrink Posterior Restorative Capsule Refill B2 20 capsules 0.2g each, shade B2 4771C2 Filtek Silorane Low Shrink Posterior Restorative Capsule Refill C2 20 capsules 0.2g each, shade C2 4772A2 Filtek Silorane Low Shrink Posterior Restorative Syringe Refill A2 1 syringe 4g, shade A2 4772A3 Filtek Silorane Low Shrink Posterior Restorative Syringe Refill A3 1 syringe 4g, shade A3 Item # Product Information 4772B2 Filtek Silorane Low Shrink Posterior Restorative Syringe Refill B2 1 syringe 4g, shade B2 4772C2 Filtek Silorane Low Shrink Posterior Restorative Syringe Refill C2 1 syringe 4g, shade C2 4773 Silorane System Adhesive Self-Etch Primer and Bond 1 vial Primer 5ml; 1 vial Bond 5ml; 100 microbrushes (50 black, 50 green) 4773P 4773B The Filtek Silorane Restorative System ensures marginal quality due to reduced shrinkage forces combined WITH excellent adhesive force values. Silorane System Adhesive Self-Etch Primer Refill 1 vial Primer 5ml Silorane System Adhesive Self-Etch Bond Refill 1 vial Bond 5ml For more information please contact your local 3M ESPE Sales Representative, or call Customer Service. Products are available for purchase through Authorised 3M ESPE Distributors. Customer Service: 0800 200 710 or visit www.3mespe.co.nz 3M ESPE Dental Division 3M New Zealand Ltd 250 Archers Rd Glenfield Freephone: 0800 200 710 www.3mespe.co.nz 3M ESPE and Filtek are trademarks of 3M or 3M ESPE AG. CeramX, EsthetX, EvoCeram, Grandio, Herculite XRV, Premise, QuixX, Spectrum, Tetric, TPH, Venus and XtraFil are not trademarks of 3M. Please recycle. Copyright 3M New Zealand Ltd