SAFETY DATA SHEET DUNLOP DISPERSION ADHESIVES AND GROUTS

Transcription

1 SAFETY DATA SHEET DUNLOP DISPERSION ADHESIVES AND GROUTS 1. IDENTIFICATION OF THE PREPARATION PRODUCT NAMES: PRODUCT DESCRIPTION: APPLICATIONS: MANUFACTURER: Dunlop CTA, Dunlop Fix and Grout, Dunlop Waterproof CTA, Dunlop Tile on Wood, Dunlop Profix 4, Dunlop Flooring Adhesive, Dunlop Ready Mixed Grout, Dunlop Waterproof Coating. Water based adhesives, grouts and/or waterproofing materials. Adhesives and/or grouts. Building Adhesives Limited Longton Road Trentham Stoke on Trent ST4 8JB Tel: +44 (0) Fax: +44 (0) COMPOSITION/INFORMATION ON INGREDIENTS COMPOSITION COMMENTS: Water based dispersions containing organic polymer, mineral fillers, organic and inorganic additives. 3. HAZARDS IDENTIFICATION 4. FIRST AID MEASURES Not regarded as health or environmental hazard under current legislation. INHALATION: INGESTION: SKIN: EYES: Remove affected personnel to fresh air, keep warm and at rest. If irritation persists, seek Do not induce vomiting. Rinse mouth with clean water and drink plenty of water. Seek Remove contaminated clothing immediately and wash affected area with soap and water. If irritation persists, seek Make sure to remove contact lenses before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention. 5. FIRE FIGHTING MEASURES EXTINGUISHING MEDIA: These products are non-flammable. Use extinguishing media appropriate for the surrounding fire. 6. ACCIDENTAL RELEASE MEASURES PERSONAL PROTECTION: Do not attempt to take action without suitable protective clothing see section 8. PRECAUTIONS TO PROTECT ENVIRONMENT: SPILL CLEANUP METHODS: Do not allow spillages to enter drains or watercourses. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. Do not contaminate water courses or sewers.

2 7. HANDLING AND STORAGE USAGE PRECAUTIONS: STORAGE PRECAUTIONS: Handle in well ventilated areas. Avoid skin and eye contact. Keep in cool, dry, ventilated storage. Keep in original container. 8. EXPOSURE CONTROLS AND PPE PROTECTIVE EQUIPMENT: VENTILATION: PROTECTIVE GLOVES: EYE PROTECTION: OTHER PROTECTION: HYGIENIC WORK PRACTICE: Work in well ventilated areas. Use suitable protective gloves if there is a risk of skin contact. Goggles giving complete protection to the eyes and eyewash bottle. Wear appropriate clothing to prevent any possibility of skin contact. Do not smoke in the work area. Wash hands before eating, smoking or using the toilet. Do not eat or drink whilst using these products. Promptly remove any clothing that becomes contaminated. 9. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: Viscous pastes. 10. STABILITY AND REACTIVITY STABILITY: CONDITIONS TO AVOID: HAZARDOUS DECOMP. PRODUCTS: Normally stable. Protect from frost. Combustion may produce carbon monoxide and carbon dioxide. 11. TOXICOLOGICAL INFORMATION HEALTH WARNING: No specific health warnings noted. 12. ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: Not regarded as dangerous for the environment. 13. DISPOSAL CONSIDERATION DISPOSAL METHODS: Dispose of in accordance with local authority requirements. 14. TRANSPORT INFORMATION CLASSIFICATION FOR CONVEYANCE: Not required. 15. REGULATORY INFORMATION LABEL FOR SUPPLY: RISK PHRASES:

3 SAFETY PHRASES: STATUTORY INSTRUMENTS: GUIDANCE NOTES: S-2 Keep out of reach of children. S-24/25 Avoid contact with skin and eyes. S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S-27/28 After contact with skin, immediately take off all contaminated clothing and wash with plenty of water. Chemicals (Hazard Information and Packaging) Regulations. Workplace Exposure Limits EH OTHER INFORMATION REVISION COMMENTS: 3 REVISION DATE: SDS NO: BAL100 DISCLAIMER: The information provided is accurate to the best knowledge of Building Adhesives Limited and is given on the understanding that the product will be used in accordance with any instructions provided for the product. Should any use be contemplated outside these instructions then appropriate advice should be sought.

4 SAFETY DATA SHEET DUNLOP LIQUIDS AND ADMIXTURES 1. IDENTIFICATION OF THE PREPARATION PRODUCT NAMES: PRODUCT DESCRIPTION: APPLICATIONS: MANUFACTURER: Dunlop Flexible Additive, Dunlop Tile on Wood Rapid Liquid, Dunlop Universal Bonding Agent, Dunlop Waterproof Primer. Water based polymers. Admixtures and primers. Building Adhesives Limited Longton Road Trentham Stoke on Trent ST4 8JB Tel: +44 (0) Fax: +44 (0) COMPOSITION/INFORMATION ON INGREDIENTS COMPOSITION COMMENTS: Water based dispersions of synthetic polymers. 3. HAZARDS IDENTIFICATION 4. FIRST AID MEASURES Not known to cause irritation by inhalation but may lead to affected personnel feeling generally unwell. May cause irritation by ingestion. May cause irritation by skin contact. May cause irritation on eye contact. INHALATION: INGESTION: SKIN: EYES: Remove affected personnel to fresh air, keep warm and at rest. If irritation persists, seek Do not induce vomiting. Rinse mouth with clean water and drink plenty of water. Seek Remove contaminated clothing immediately and wash affected area with soap and water. If irritation persists, seek Make sure to remove contact lenses before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention. 5. FIRE FIGHTING MEASURES EXTINGUISHING MEDIA: These products are non-flammable. Use extinguishing media appropriate for the surrounding fire. 6. ACCIDENTAL RELEASE MEASURES PERSONAL PROTECTION: Do not attempt to take action without suitable protective clothing see section 8. PRECAUTIONS TO PROTECT ENVIRONMENT: SPILL CLEANUP METHODS: Do not allow spillages to enter drains or watercourses. Absorb in vermiculite, dry sand or earth and place into containers. Flush with plenty of water to clean spillage area. Do not contaminate water courses or sewers.

5 7. HANDLING AND STORAGE USAGE PRECAUTIONS: STORAGE PRECAUTIONS: Handle in well ventilated areas. Avoid skin and eye contact. Keep in cool, dry, ventilated storage. Keep in original container. 8. EXPOSURE CONTROLS AND PPE PROTECTIVE EQUIPMENT: VENTILATION: PROTECTIVE GLOVES: EYE PROTECTION: OTHER PROTECTION: HYGIENIC WORK PRACTICE: Work in well ventilated areas. Use suitable protective gloves if there is a risk of skin contact. Goggles giving complete protection to the eyes and eyewash bottle. Wear appropriate clothing to prevent any possibility of skin contact. Do not smoke in the work area. Wash hands before eating, smoking or using the toilet. Do not eat or drink whilst using these products. Promptly remove any clothing that becomes contaminated. 9. PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE: Liquids. 10. STABILITY AND REACTIVITY STABILITY: CONDITIONS TO AVOID: HAZARDOUS DECOMP. PRODUCTS: Normally stable. Protect from frost. Combustion may produce carbon monoxide and carbon dioxide. 11. TOXICOLOGICAL INFORMATION HEALTH WARNING: No specific health warnings noted. 12. ECOLOGICAL INFORMATION ECOLOGICAL INFORMATION: Not regarded as dangerous for the environment. 13. DISPOSAL CONSIDERATION DISPOSAL METHODS: Dispose of in accordance with local authority requirements. 14. TRANSPORT INFORMATION CLASSIFICATION FOR CONVEYANCE: Not required. 15. REGULATORY INFORMATION LABEL FOR SUPPLY: RISK PHRASES:

6 SAFETY PHRASES: STATUTORY INSTRUMENTS: GUIDANCE NOTES: S-2 Keep out of reach of children. S-24/25 Avoid contact with skin and eyes. S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S-27/28 After contact with skin, immediately take off all contaminated clothing and wash with plenty of water. Chemicals (Hazard Information and Packaging) Regulations. Workplace Exposure Limits EH OTHER INFORMATION REVISION COMMENTS: 2 REVISION DATE: SDS NO: BAL102 DISCLAIMER: The information provided is accurate to the best knowledge of Building Adhesives Limited and is given on the understanding that the product will be used in accordance with any instructions provided for the product. Should any use be contemplated outside these instructions then appropriate advice should be sought.