1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS 3. HAZARDS IDENTIFICATION 4. FIRST AID MEASURES

Transcription

1 Material Safety Data Sheet Revision Date: 07/07/2006 Issue date: 10/07/2006 Version: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Region: Europe Company Name & Address Henkel Loctite Adhesives Ltd. Multicore Solders Technologies House, Wood Lane End Hemel Hempstead, Herts HP2 4RQ, UK Tel: +44 (0) Fax: +44 (0) Emergency Tel: +44 (0) Product type: Rework flux 2. COMPOSITION/INFORMATION ON INGREDIENTS EINECS-No. % Classification Xi;R36 Xn;R22 Additional Information: For the explanation of the listed risk phrases refer to Section HAZARDS IDENTIFICATION Harmful if swallowed. Irritating to eyes. This product contains modified rosin. Flux fumes emitted during reflow will irritate the nose and throat and may cause an asthmatic type reaction. 4. FIRST AID MEASURES Inhalation: Eye contact: Ingestion: Skin contact: Move to fresh air. If symptoms persist, seek medical advice. Flush eyes immediately with plenty of water for at least 15 minutes. Seek medical attention immediately. Do not induce vomiting. Seek medical attention immediately. Wash off with soap and plenty of water. 5. FIRE-FIGHTING MEASURES 1 of 5

2 Extinguishing media: Special fire fighting procedures: Hazardous combustion products: Water spray (fog), foam, dry chemical or carbon dioxide. Fire fighters should wear positive pressure breathing apparatus. Thermal decomposition can lead to release of irritating gases and vapours. 6. ACCIDENTAL RELEASE MEASURES Environmental precautions: Clean-up methods: Do not let product enter drains. Wear protective clothing, gloves and safety glasses. Scrape up spilled material and place in a closed container for disposal. 7. HANDLING AND STORAGE Handling: Storage: Avoid contact with skin and eyes. Use of safety glasses and gloves is advisable. Store in a cool, dry place in tightly closed containers. Store away from sources of heat or ignition. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION ACGIH TLV Austria Belgium Czech 110 mg/m³ MAK 20 ppm MAK Estonia Greece Finland France Hungary 110 mg/m³ TWA 20 ppm TWA 290 mg/m³ STEL 50 ppm STEL Germany Ireland Netherlands Norway Portugal 110 mg/m³ MAK 20 ppm MAK 220 mg/m³ Peak 40 ppm Peak 110 mg/m³ MAC 20 ppm MAC Modified rosin Poland Spain Sweden UK EH mg/m 3 NDS Rosin flux fume: 0.05 mg/m³ MEL TWA (As total resin acids) 0.15 mg/m³ MEL STEL (As total resin acids) Engineering controls: Respiratory protection: Skin protection: Eye/face protection: Extraction is necessary to remove fumes evolved during reflow. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. In case of insufficient ventilation, wear suitable respiratory equipment. For hand protection, use rubber or plastic gloves. Safety glasses should be worn. 2 of 5

3 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state: Colour: Odour: ph: Vapour pressure: Boiling point/range: Melting point/range: paste light brown mild 187 C (369 F) Specific gravity: 1.00 Vapour density: Flash point: Autoignition temperature: Flammable limits in air - lower %: Flammable limits in air - upper %: Solubility in water: 121 C (250 F) 500 C (932 F) immiscible VOC content: 50-60% 10. STABILITY AND REACTIVITY Hazardous decomposition products: Incompatability: Conditions to avoid: Thermal decomposition can lead to release of irritating gases and vapours. Incompatible with oxidising agents. Keep away from open flames, hot surfaces and sources of ignition. 11. TOXICOLOGICAL INFORMATION LD50s & LC50s Oral LD50 (Rat) = 1260 mg/kg Dermal LD50 (Rabbit) = 5 ml/kg Inhalation: Skin: Eyes: Ingestion: Fumes evolved at soldering temperatures will irritate the nose, throat and lungs. Prolonged or repeated exposure to flux fumes may result in sensitisation in sensitive workers. Prolonged skin contact may cause skin irritation and/or dermatitis. Irritating to eyes. Harmful if swallowed. May cause nausea, vomiting and abdominal pain. Ingestion of large quantities may cause liver or kidney damage. 12. ECOLOGICAL INFORMATION Mobility: Bioaccumulation: Item No. : MB of 5

4 Ecotoxicity: Persistence and degradability: No data is available on the product itself. 2-Phenoxythanol: LC50 Fathead minnows = 347 mg/l EC50 Daphnia = 460 mg/l 13. DISPOSAL CONSIDERATIONS Product Disposal methods: European Waste Catalogue: Dispose of this material and its container as a hazardous or special waste. Incineration under controlled conditions is recommended discarded organic chemicals consisting of or containing dangerous substances. Packaging Disposal Methods: Dispose of as unused product. 14. TRANSPORT INFORMATION ICAO/IATA (Air): Identification number: Hazard class or division: Packing group: Not restricted IMO/IMDG (Sea) Identification number: Hazard class or division: Packing group: Not restricted ADR/RID (Road/Rail) UN Number Hazard class or division Packing group Unrestricted 15. REGULATORY INFORMATION Contains: Indication of danger: Xn - Harmful. Risk Phrases: Safety Phrases: Additional Labelling: UK National regulations: R22 - Harmful if swallowed. R36 - Irritating to eyes. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. When heated fumes may cause sensitisation by inhalation. The Health & Safety at Work etc. Act The Control of Substances Hazardous to Health Regulations 2002 L5: General Approved Code of Practice to the COSHH Regulations HS(G)97: A Step by Step Guide to the COSHH Regulations HS(G)193: COSHH essentials: Easy steps to control chemicals IND (G)248L: Solder fume and you(g)249l: Controlling health risks from rosin (colophony) based solder fluxes 4 of 5

5 16. OTHER INFORMATION Supercedes Sheet Dated: 03/05/2005 Prepared by: Barry Chase Senior Specialist Product Safety & Regulatory Affairs - Europe MSDS data Revised: 26/01/2006 The information in this safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product(s) described herein. Attention of users is drawn to the possible hazards from improper use of the product(s). This safety data sheet was prepared in accordance with Commission Directive 2004/73/EC adapting to technical progress for the 29th time Council Directive 67/548/EEC, and Commission Directive 1999/45/EC. Explanation of Section 2 R - Phrases R36 - Irritating to eyes. R22 - Harmful if swallowed. 5 of 5