VITA CAD/CAM MATERIALS All solutions at a glance

Transcription

1 CAD/CAM MATERIALS All solutions at a glance Compendium for practices and laboratories Date of issue: perfect match. CAD/CAM MATERIALS for best solutions. Proven a million times over.

2 CAD/CAM MATERIALS for best solutions. CAD-Temp multicolor CAD-Temp monocolor BLOCS Mark II TriLuxe TriLuxe forte RealLife ENAMIC ENAMIC multicolor CAD-Waxx Best solutions for temporary restorations / Auxiliaries CAD/CAM MATERIALS SUPRINITY PC SUPRINITY FC Best solutions for single tooth restorations YZ T YZ HT ENAMIC IS Rapid Layer Technology Best solutions for framework constructions / fully anatomical bridges CAD-Temp IS Best solutions for implant-supported restorations is the pioneer in the field of dental CAD/CAM materials for practices and laboratories. has been offering top-quality material solutions for a wide range of indications since In addition to materials for temporary restorations, 's product range includes highly esthetic products for single tooth restorations, materials for framework constructions and fully anatomical bridge restorations, as well as products for implant-supported restorations. Today, users in practices and laboratories benefit from numerous proven solutions and groundbreaking, innovative materials.

3 Proven solutions. Groundbreaking innovations. has been developing CAD/CAM materials for dentists and dental technicians for more than 25 years. One of the company's first milestones was the introduction of the BLOCS, which have proven their reliability a million times over. Innovative materials concepts, such as the dual-network hybrid ceramic ENAMIC, were more recently introduced. Today, offers a variety of solutions for almost all indications. BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife 2007: CAD-Temp composite 2013: ENAMIC hybrid ceramic 2014: YZ HT zirconia 2015: IMPLANT SOLUTIONS Li 2O 2016: SUPRINITY PC glass ceramic zirconia-reinforced +ZrO 2 Si 2O SUPRINITY PC Li 2O 2O Si +ZrO 2 zirkondioxidverstärkt YZ HT SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T 2002: YZ T Zirconia 1985: BLOCS feldspar ceramics Rapid Layer Technology Components/ accessories

4 BLOCS Mark II proven a million times over BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife BLOCS Mark II are monochromatic feldspar ceramic blanks that are perfectly suited for CAD/ CAM fabrication of inlays, onlays and partial crowns. The shades of BLOCS Mark II restorations match those of residual teeth. FACTS & FEATURES BLOCS Mark II is: a monochromatic, tooth-colored feldspar ceramic Dental practices/laboratories benefit from: reliability proven a million times over more than 25 years of clinical experience excellent shade integration, thanks to chameleon effect fast processing since seating is enabled immediately after CAM fabrication/polishing BLOCS Mark II is: particularly suited for esthetic reconstructions in cases of minor defects Rapid Layer Technology YZ HT SUPRINITY FC SUPRINITY PC IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T more information: BLOCS concept brochure 1454 more product data Components/ accessories

5 BASIC INFORMATION Recommended indications* For smaller, esthetic reconstructions inlays onlays partial crowns Process steps 1-step material: CAM fabrication, polishing and seating; firing not required Optional: characterization / individualization System compatibility BLOCS Mark II SYSTEM SOLUTIONS** offers BLOCS with specific holder systems for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) MyCrown Mill (FONA Dental s.r.o.) Planmill 40 (D4D Technologies LLC.) Ceramill Motion 2 (Amann Girrbach AG) TS150 (Glidewell Laboratories) KaVo ARCTICA/Everest (KaVo Dental GmbH) BLOCS Mark II UNIVERSAL SOLUTIONS offers BLOCS with universal holder system for the CAD/CAM systems: CORiTEC line (imes-icore GmbH) Roland DWX-4W (Roland DG) CS 3000 (Carestream Inc.) Impression K-/S devices (vhf camfacture AG) *) These are recommended indications - the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of geometries/shades of CAD/CAM materials available may vary for the individual CAD/CAM system partners or systems.

6 Available shades SYSTEM 3D MASTER 0M1C (for I12, I14), 1M1C, 1M2C, 2M1C, 2M2C, 2M3C, 3M1C, 3M2C, 3M3C, 4M2C classical A1C*, A2C*, A3C*, A3.5C, A4C, B2C, B3C, C2C, C3C, D3C *) I8 geometry size only available in 3 shades Geometries BLOCS Mark II I8 I10 I12 I14 Rapid Layer Technology YZ HT BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SUPRINITY PC I8: 8 x 8 x 15 mm SUPRINITY FC I10: 8 x 10 x 15 mm IMPLANT CAD-Temp SOLUTIONS I12: 10 x 12 x 15 mm CAD-Waxx YZ T I14: 12 x 14 x 18 mm more product data Components/ accessories

7 INDIVIDUAL PRODUCTS/ASSORTMENTS pack of 5 BLOCS Mark II feldspar ceramic blanks SYSTEM COMPONENTS Characterization with AKZENT Plus Bonding with ADIVA LUTING SOLUTIONS Individualization with VM 9 more information: chapter Components/Accessories

8 BLOCS TriLuxe/TriLuxe forte/reallife for a natural play of colors BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology SUPRINITY FC SUPRINITY PC These are second generation BLOCS blanks. The integrated shade gradient enables digital reproduction of the natural play of colors. BLOCS TriLuxe/TriLuxe forte feature 3 or 4 layers of different shade intensity. Using 3D layering, BLOCS RealLife replicates the tooth s natural enamel-layered-over dentin design for anterior esthetics that looks just like natural teeth. FACTS & FEATURES BLOCS TriLuxe/TriLuxe forte/reallife are: multichromatic feldspar ceramic blanks with integrated tooth color gradient Dental practices/laboratories benefit from: next generation, proven a million times over natural play of colors, thanks to integrated tooth shade gradient fast processing since seating is enabled immediately after CAM fabrication/polishing simple CAD/CAM-aided reproduction of individual esthetics BLOCS TriLuxe/TriLuxe forte/reallife are: suited for highly esthetic reconstructions in the visible region IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT more information: BLOCS concept brochure 1454 more product data Components/ accessories

9 BASIC INFORMATION Recommended indications* For highly esthetic reconstructions in the visible region anterior crowns veneers Process steps 1-step material: CAM fabrication, polishing and seating; firing not required Optional: characterization / individualization System compatibility BLOCS TriLuxe/RealLife SYSTEM SOLUTIONS** offers BLOCS with specific holder systems for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) KaVo ARCTICA/Everest (KaVo Dental GmbH) MyCrown Mill (FONA Dental s.r.o.) BLOCS TriLuxe forte SYSTEM SOLUTIONS** offers BLOCS with specific holder systems for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) Ceramill Motion 2 (Amann Girrbach AG) MyCrown Mill (FONA Dental s.r.o.) KaVo ARCTICA/Everest (KaVo Dental GmbH) Planmill 40 (D4D Technologies LLC.) BLOCS TriLuxe forte UNIVERSAL SOLUTIONS** offers BLOCS with universal holder system for the CAD/CAM systems: CORiTEC line (imes-icore GmbH) CS 3000 (Carestream Inc.) Impression K-/S devices (vhf camfacture AG) Roland DWX-4W (Roland DG) *) These are recommended indications - the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems.

10 Available shades BLOCS TriLuxe/TriLuxe forte: SYSTEM 3D-MASTER 1M2C, 2M2C, and 3M2C classical A1C, A2C, A3C, A3.5C* *) shade only available for BLOCS TriLuxe forte BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife BLOCS RealLife: SYSTEM 3D-MASTER 0M1C, 1M1C, 1M2C, 2M1C, 2M2C, and 3M2C Geometries TRI-12 TF-12 SUPRINITY PC SUPRINITY FC BLOCS TriLuxe/TriLuxe forte: TRI-12/TF-12: 10 x 12 x 15 mm TRI-14 TF-14 TRI-14/14 TF-14/14 YZ T CAD-Waxx IMPLANT CAD-Temp SOLUTIONS BLOCS TriLuxe/TriLuxe forte: TRI-14/TF-14: 12 x 14 x 18 mm BLOCS TriLuxe/TriLuxe forte: TRI-14/14/TF-14/14: 14 x 14 x 18 mm RL-14/14 YZ HT BLOCS RealLife: RL-14/14: 14 x 14 x 18 mm Rapid Layer Technology more product data Components/ accessories

11 INDIVIDUAL PRODUCTS/ASSORTMENTS pack of 5 BLOCS Triluxe/Triluxe forte feldspar ceramic blanks pack of 10 BLOCS TriLuxe TRI-12 feldspar ceramic blanks pack of 5 BLOCS RealLife forte feldspar ceramic blanks SYSTEM COMPONENTS Characterization with AKZENT Plus Bonding with ADIVA LUTING SOLUTIONS Individualization with VM 9 more information: chapter Components/Accessories

12 ENAMIC a new definition of load capacity* BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife ENAMIC is the first hybrid dental ceramic in the world with a dual-network structure. In this dental material, the dominant ceramic network is strengthened by a polymer network, with both networks fully integrated with one another. In addition to a high degree of elasticity, this innovative hybrid ceramic guarantees particularly high load capacity after adhesive bonding. FACTS & FEATURES ENAMIC is the first hybrid dental ceramic in the world with a dual-network structure a perfect combination of load capacity and elasticity Dental practices/laboratories benefit from: enormous load capacity since masticatory forces are absorbed restorations that preserve natural tooth structure, as the wall thickness can be reduced. precise and particularly accurate results fast and efficient CAM fabrication tooth-like material properties ENAMIC is specially suited for minimally invasive, delicate reconstructions and anterior/posterior crowns IMPLANT CAD-Temp SOLUTIONS Rapid Layer Technology SUPRINITY FC SUPRINITY PC CAD-Waxx YZ T YZ HT *) In addition to a high degree of elasticity, this innovative hybrid ceramic guarantees particularly high load capacity after adhesive bonding. more information: ENAMIC concept brochure more product data Components/ accessories

13 En BASIC INFORMATION Recommended indications* ENAMIC: Reconstructions with limited space, repair of minor defects, tabletop, posterior crowns ENAMIC multicolor: esthetically pleasing anterior/posterior crowns, delicate (non-prep) veneers ENAMIC IS: implant-supported crowns Process steps 1-step materials: CAM fabrication, polishing and seating; no firing! optional: characterization / individualization System compatibility ENAMIC SYSTEM SOLUTIONS** offers ENAMIC with specific holder systems for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) Planmill 40 (D4D Technologies LLC.) Ceramill Motion 2 (Amann Girrbach AG) TS150 (Glidewell Laboratories) KaVo ARCTICA/Everest (KaVo Dental GmbH) MyCrown Mill (FONA Dental s.r.o.) ENAMIC UNIVERSAL SOLUTIONS** offers ENAMIC with universal holder system or in DISC geometry for the CAD/CAM systems: CORiTEC line (imes-icore GmbH) MILLING UNIT M line (Zirkonzahn S.r.l.) Roland DWX line (Roland DG) Organical Desktop line (R+K CAD/CAM Technologie GmbH & Co. KG) CS 3000 (Carestream Inc.) Impression K/S devices (vhf camfacture AG) Zfx Inhouse5x (Zfx GmbH) DMG ULTRASONIC series (DMG Mori AG) Röders RXD series (Röders GmbH) inlab MC X5 (Sirona Dental Systems GmbH) *) These are recommended indications - the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems.

14 Available shades SYSTEM 3D-MASTER, high translucent 0M1-HT, 1M1-HT*, 1M2-HT*, 2M1-HT, 2M2-HT*, 2M3-HT, 3M1-HT, 3M2-HT*, 3M3-HT, 4M2-HT* SYSTEM 3D-MASTER, translucent 0M1-T, 1M1-T, 1M2-T, 2M1-T, 2M2-T, 2M3-T, 3M1-T, 3M2-T, 3M3-T, 4M2-T * Available as ENAMIC multicolor BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Geometries EM-14 EM-14: 12 x 14 x 18 mm EMC-14 EMC-14: 12 x 14 x 18 mm SUPRINITY PC SUPRINITY FC EM mm > 18 mm Rapid Layer Technology YZ T EM-10: 8 x 10 x 15 mm IMPLANT CAD-Temp SOLUTIONS CAD-Waxx ENAMIC DISC Ø 98.4/H 12 mm Ø 98.4/H 18 mm YZ HT more product data Components/ accessories

15 INDIVIDUAL PRODUCTS/ASSORTMENTS ENAMIC Pack of 5 ENAMIC hybrid ceramic blanks ENAMIC Starter Set clinical 10 packs of 5 ENAMIC blanks in 5 shades and 2 translucency levels ENAMIC Polishing Set clinical ENAMIC Starter Set technical 10 packs of 5 ENAMIC blanks in 5 shades and 2 translucency levels ENAMIC Polishing Set technical SYSTEM COMPONENTS Characterization with ENAMIC stains Bonding with ADIVA LUTING SOLUTIONS Individualization with VM LC fl ow ENAMIC polishing instruments more information: chapter Components/Accessories

16 SUPRINITY PC glass ceramic. Revolutionized. BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology SUPRINITY FC SUPRINITY PC Zahnfabrik has been offering SUPRINITY PC, a new generation of glass ceramic material products, since May The innovative glass ceramic is enriched with zirconia (approx. 10 wt.%). As a result, a high-strength, zirconia-reinforced lithium silicate ceramic (ZLS) is available for practices and laboratories. FACTS & FEATURES SUPRINITY PC is: a zirconia-reinforced, high-strength glass ceramic (partially crystallized) Dental practices/laboratories benefit from: high reliability, thanks to a zirconia-reinforced glass ceramic matrix optimized edge stability compared to lithium disilicate (Sirona's MC LX system) simple processing, thanks to good polishing characteristics and high firing stability brilliant esthetics based on integrated translucency, opalescence and fluorescence SUPRINITY PC is: suitable for a wide range of indications IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT more information: SUPRINITY concept brochure 2002 more product data Components/ accessories

17 BASIC INFORMATION Recommended indications* Various (esthetic) options and wide indication range: posterior crowns anterior crowns implant-supported crown veneers Process steps 2-step material: CAM fabrication, followed by crystallization or combination firing optional: characterization / individualization System compatibility SUPRINITY PC SYSTEM SOLUTIONS** offers SUPRINITY PC with specific holder systems for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) Planmill 40 (D4D Technologies LLC.) MyCrown Mill (FONA Dental s.r.o.) Ceramill Motion 2 (Amann Girrbach AG) KaVo ARCTICA/Everest (KaVo Dental GmbH) SUPRINITY PC UNIVERSAL SOLUTIONS** offers SUPRINITY PC with universal holder system for the CAD/CAM systems: CS 3000 (Carestream Inc.) Core3d i line (Core3d Centres International N.V.) DMG ULTRASONIC line (DMG Mori AG) CORiTEC line (imes-icore GmbH) Röders RXD line (Röders GmbH) Impression K-/S devices (vhf camfacture AG) MILLING UNIT M line (Zirkonzahn S.r.l.) Roland DWX-4W (Roland DG) Zfx Inhouse5x (Zfx GmbH) *) These are recommended indications - the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of geometries/shades of CAD/CAM materials available may vary for the individual CAD/CAM system partners or systems.

18 Available shades classical, high translucent A1-HT, A2-HT, A3-HT, A3.5-HT, B2-HT, C2-HT, D2-HT classical, translucent A1-T, A2-T, A3-T, A3.5-T, B2-T, C2-T, D2-T SYSTEM 3D-MASTER, high translucent 0M1-HT, 1M1-HT,1M2-HT, 2M2-HT, 3M2-HT, 4M2-HT BLOCS Mark II PC-14 Rapid Layer Technology YZ HT YZ T CAD-Waxx BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SYSTEM 3D-MASTER, translucent 0M1-T, 1M1-T, 1M2-T, 2M2-T, 3M2-T, 4M2-T Geometry SUPRINITY PC SUPRINITY FC PC-14: 12 x 14 x 18 mm IMPLANT CAD-Temp SOLUTIONS more product data Components/ accessories

19 INDIVIDUAL PRODUCTS/ASSORTMENTS SUPRINITY PC pack of 5 SUPRINITY PC glass ceramic blanks SUPRINITY PC Starter Set clinical 16 packs of 5 SUPRINITY PC blanks (one pack of each shade and translucency level) SUPRINITY Polishing Set clinical AKZENT Plus GLAZE LT SPRAY fibrous pad firing supports and platinum pins SUPRINITY PC Starter Set technical 16 packs of 5 SUPRINITY PC blocks (one pack of each shade and translucency level) SUPRINITY Polishing Set technical AKZENT Plus GLAZE LT SPRAY fibrous pad firing supports and platinum pins SYSTEM COMPONENTS Characterization with AKZENT Plus Bonding with ADIVA LUTING SOLUTIONS Individualization with VM 11 SUPRINITY polishing instruments more information: chapter Components/Accessories

20 SUPRINITY FC glass ceramic. Revolutionized. BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology YZ HT SUPRINITY FC SUPRINITY PC SUPRINITY FC is a zirconia reinforced lithium silicate glass ceramic in the fully crystallized state. After the CAM process and polishing, restorations can be seated without an additional firing process. As a result, this material is perfectly suited for repairing minor defects. FACTS & FEATURES SUPRINITY FC is: a zirconia-reinforced glass ceramic (fully crystallized) Dental practices/laboratories benefit from: glass ceramic with medium level of strength for high durability fast processing, since restoration can be seated after CAM fabrication and polishing excellent shade integration SUPRINITY FC is: suitable for esthetic reconstructions in cases of minor defects IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T Note: This is preliminary product information. SUPRINITY FC is expected to be available during the year more information: SUPRINITY concept brochure 2002 more product data Components/ accessories

21 BASIC INFORMATION Recommended indications* For smaller, esthetic reconstructions inlays onlays partial crowns Process steps 1-step material: CAM fabrication, polishing and seating; firing not required optional: characterization / individualization System compatibility SUPRINITY FC SYSTEM SOLUTIONS** offers SUPRINITY FC with a specific holder system for the CAD/CAM system: CEREC/inLab (Sirona Dental Systems GmbH) *) These are recommended indications - the entire range of single tooth restorations can normally be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of geometries/shades of CAD/CAM materials available may vary for the individual CAD/CAM system partners or systems.

22 Available shades classical, high translucent 0M1-HT, A1-HT, A2-HT, A3-HT, A3.5-HT, B2-HT, C2-HT, D2-HT classical, translucent 0M1-T, A1-T, A2-T, A3-T, A3.5-T, B2-T, C2-T, D2-T Geometry BLOCS Mark II FC-14 Rapid Layer Technology YZ HT YZ T CAD-Waxx IMPLANT CAD-Temp SOLUTIONS BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SUPRINITY PC FC-14: 12 x 14 x 18 mm SUPRINITY FC more product data Components/ accessories

23 INDIVIDUAL PRODUCTS/ASSORTMENTS SUPRINITY FC pack of 5 SUPRINITY glass ceramic blanks SYSTEM COMPONENTS Characterization with AKZENT Plus Bonding with ADIVA LUTING SOLUTIONS Individualization with VM 11 SUPRINITY polishing instruments more information: chapter Components/Accessories

24 IMPLANT SOLUTIONS Best solutions for implant-supported restorations BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology SUPRINITY FC SUPRINITY PC IMPLANT SOLUTIONS (IS) are blanks comprised of hybrid ceramic or composite for the CAD/ CAM fabrication of implant-supported dental restorations. They feature an integrated interface for an adhesive/titanium base (e.g. TiBase). They are available in two variants: CAD-Temp IS and ENAMIC IS. FACTS & FEATURES IMPLANT SOLUTIONS are: blanks with integrated interface for the fabrication of implant superstructures With ENAMIC IS, dental practices and laboratories benefit from: absorbent material properties, thanks to elasticity similar to that of dentin highly accurate results in thin marginal areas fast processing as the superstructure can be seated directly after CAM fabrication / polishing With CAD-Temp IS, dental practices and laboratories benefit from: efficient fabrication of temporaries simple shaping of the emergence profile IMPLANT SOLUTIONS are: suitable for mesostructures (MS) and/or abutment crowns (AC) IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT more information: IMPLANT SOLUTIONS concept brochure more product data Components/ accessories

25 BASIC INFORMATION Recommended indications* For tooth-colored mesostructures (MS) and/or abutment crowns (AC) temporary restorations / soft-tissue management: CAD-Temp IS final superstructures: ENAMIC IS Process steps 1-step materials: CAD-Temp IS/ ENAMIC IS CAM fabrication, bond with the base and screw onto the implant; no fi ring! optional: characterization / individualization System compatibility IMPLANT SOLUTIONS SYSTEM SOLUTIONS offers IMPLANT SOLUTIONS blanks with a specific holder system for the CAD/CAM system: CEREC/inLab (Sirona Dental Systems GmbH) *) These are recommended indications. For details, please refer to the respective working instructions of the products.

26 Available shades ENAMIC IS-14 (MS type) with S or L interface in: 1M1-T, 1M2-T, 2M2-T, 3M2-T, 4M2-T ENAMIC IS-16 (AC type) with S or L interface in: 1M1-HT, 1M2-HT, 2M2-HT, 3M2-HT, 4M2-HT CAD-Temp IS-16 (AC type) with S- or L-interface in: 1M2T, 2M2T, 3M2T Geometries IS-14 IS-14: 18 x 14 x 12 (for mesostructures) IS-16 Rapid Layer Technology YZ HT SUPRINITY FC SUPRINITY PC BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife IMPLANT CAD-Temp SOLUTIONS CAD-Waxx IS-16: 18 x 16 x 18 (for abutment crowns) YZ T For each geometry with an integrated S or L interface more product data Components/ accessories

27 INDIVIDUAL PRODUCTS/ASSORTMENTS IMPLANT SOLUTIONS pack of 5 IMPLANT SOLUTIONS blanks SYSTEM COMPONENTS TiBase TiBase-compatible implant systems more information: chapter Components/Accessories

28 CAD-Temp Best solutions for long-term temporary restorations BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology YZ HT SUPRINITY FC SUPRINITY PC The well-proven CAD/CAM composite CAD-Temp is a cross-linked acrylate polymer with microfiller. The material is available in monocolor (monochromatic) and multicolor (multichromatic) and is used for the CAD/CAM fabrication of long-term, temporary restorations. FACTS & FEATURES CAD-Temp is: a CAD/CAM composite for the fabrication of long-term temporary restorations Dental practices/laboratories benefit from: good, long-term stability (period of wearing: up to 3 years) and abrasion resistance natural shade effect, thanks to impressive light optical properties cost-effective fabrication of temporaries using CAD/CAM technology CAD-Temp is: suitable for temporary crown and bridge restorations IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T more product data Components/ accessories

29 BASIC INFORMATION Recommended indications* For long-term temporaries: temporaries for the anterior area: CAD-Temp multicolor temporaries for the posterior area: CAD-Temp monocolor Process steps 1-step material: CAM fabrication, polishing and seating System compatibility CAD-Temp SYSTEM SOLUTIONS** offers CAD-Temp with specific holder systems or in specific geometries for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) MyCrown Mill (FONA Dental s.r.o.) KaVo ARCTICA/Everest (KaVo Dental GmbH) CAD-Temp UNIVERSAL SOLUTIONS** offers CAD-Temp in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM systems: CORiTEC line (imes-icore GmbH) Roland DWX-4W (Roland DG)) DMG ULTRASONIC line (DMG Mori AG) CS 3000 (Carestream Inc.) Röders RXD line (Röders GmbH) inlab MC X5 (Sirona Dental Systems GmbH) Note: CAD-Temp DISCs can be processed with all open CAD/CAM systems which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove). *) These are recommended indications; normally, a more comprehensive range of restorations can be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems.

30 Available shades CAD-Temp blanks are available as monocolor variation in SYSTEM 3D-MASTER : 0M1T (für CT-40), 1M2T, 2M2T, 3M2T multicolor variation in SYSTEM 3D-MASTER : 1M2T, 2M2T, 3M2T Geometries BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife CT-40 CT-55 CTM-85/40 CTM-40 YZ HT YZ T SUPRINITY PC CAD-Temp monocolor block CT-40: 15.5 x 19 x 39 mm, CT-55: 15.5 x 19 x 55 mm SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS CAD-Temp multicolor block CTM-40: 15.5 x 19 x 39 mm, CTM-85/40: 18 x 40 x 85 mm CAD-Waxx CAD-Temp multicolor DISC Ø 98.4/H 18 mm CAD-Temp monocolor DISC Ø 98.4/H 20 mm more product data Rapid Layer Technology Components/ accessories

31 INDIVIDUAL PRODUCTS/ASSORTMENTS CAD-Temp pack of CAD-Temp containing 1, 2, 10 blank(s) pack of CAD-Temp DISC containing 1 blank SYSTEM COMPONENTS Individualization with VM LC fl ow Bonding with ADIVA LUTING SOLUTIONS more information: chapter Components/Accessories

32 CAD-Waxx BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology YZ HT SUPRINITY FC SUPRINITY PC CAD-Waxx is an acrylate polymer that burns out without leaving any residue. These are used for computer-aided fabrication of wax-ups for pressing or casting, and for the fabrication of drilling templates for implant restorations. FACTS & FEATURES CAD-Waxx is: an acrylate polymer that burns out without leaving any residue Dental practices/laboratories benefit from: fast and simple computer-aided modelling precise shaping and excellent fit cast and pressed restorations free from bubbles and cavities CAD-Waxx is: suitable for the fabrication of drilling templates suitable for the digital wax-up technique IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T more product data Components/ accessories

33 BASIC INFORMATION Recommended indications* Suitable for the fabrication of pressed objects and drilling templates Process steps 1-step material: CAM fabrication of drilling templates or pressed objects System compatibility CAD-Waxx SYSTEM SOLUTIONS** offers CAD-Waxx with specific holder systems for the CAD/CAM systems: CEREC/inLab (Sirona Dental Systems GmbH) KaVo ARCTICA/Everest (KaVo Dental GmbH) CAD-Waxx UNIVERSAL SOLUTIONS** offers CAD-Waxx in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM system: inlab MC X5 (Sirona Dental Systems GmbH) Note: CAD-Waxx DISCs can be processed with all open CAD/CAM systems which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove). *) These are recommended indications; normally, a more comprehensive range of restorations can be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems.

34 Available shades CAD-Waxx blanks are transparent Geometries CW-40/15 BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife CAD-Waxx block CW-40/15 (14 x 15 x 40 mm) CAD-Waxx DISC Ø 98.4 / H 20 mm Rapid Layer Technology YZ HT YZ T CAD-Waxx SUPRINITY FC SUPRINITY PC IMPLANT CAD-Temp SOLUTIONS more product data Components/ accessories

35 INDIVIDUAL PRODUCTS/ASSORTMENTS CAD-Waxx pack of CAD-Waxx containing 2 or 10 blanks pack of CAD-Waxx DISC containing 1 blank more information: chapter Components/Accessories

36 YZ T Best solutions for high-strength substructures BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology YZ HT SUPRINITY FC SUPRINITY PC Thanks to its remarkable strength (approx. 1,200 MPa), YZ T can be used to fabricate delicate substructures for crown and bridge restorations, with a high precision of fit. For exact shade reproduction, there is a system of matched components available for YZ T. FACTS & FEATURES YZ T is: a translucent zirconia for high-strength substructures Dental practices/laboratories benefit from: accurate results, thanks to high edge stability and precision-fit sintering high reliability, thanks to enormous strength and more than 10 years of clinical experience time-efficient fabrication, thanks to high-speed sintering process of 80 minutes matched components (e.g. veneering ceramic) for exact shade reproduction YZ T is: suitable for substructures that offer high load capacity IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T more information: YZ concept brochure more product data Components/ accessories

37 BASIC INFORMATION Recommended indications* For substructures that offer high load capacity: crown substructures in the anterior/posterior areas multi-unit anterior and posterior bridge substructures Process steps 3-step material: CAM fabrication, followed by firing the substructure is veneered in a final step System compatibility YZ T SYSTEM SOLUTIONS** offers YZ T with a specific holder system for the CAD/CAM system: inlab MC XL family (Sirona Dental Systems GmbH)* YZ T UNIVERSAL SOLUTIONS** offers YZ T in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM systems: CORiTEC line (imes-icore GmbH) DMG ULTRASONIC line (DMG Mori AG) Röders RXD line (Röders GmbH) inlab MC X5 (Sirona Dental Systems GmbH) Note: YZ T DISCs can be processed with all open CAD/CAM systems which are suitable to mill discs with a diameter of 98.4 mm (including the circumferential groove). *) These are recommended indications; normally, a more comprehensive range of restorations can be fabricated. For details, please refer to the respective working instructions of the products. **) Note: The range of CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems.

38 Available shades YZ T blanks are available as: YZ T White : non-colored (white) for coloring with YZ T COLORING LIQUIDs YZ T Color* : precolored in the shade/lightness levels LL1/light, LL2/medium and LL3/intense (only in heights of 14 and 18 mm) *) YZ T Color block geometries are only available in LL1/light. Geometries BLOCS Mark II YZ-20/19 YZ-40/19 YZ-55 YZ-65/25 10 mm > 12 mm > 14 mm > 16 mm > 18 mm > 20 mm > 25 mm YZ HT YZ T BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SUPRINITY PC SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS YZ T block YZ-20/19: 20 x 19 x 15.5 mm, YZ-40/19: 39 x 19 x 15.5 mm, YZ-55: 55 x 15.5 x 19 mm, YZ-65/25: 65 x 25 x 22 mm CAD-Waxx YZ T DISC Ø 98.4 mm in heights of h 10 mm*/h 12 mm*/h 14 mm/h 16 mm*/h 18 mm/h 20 mm/h 25 mm* *) Minimum order quantities apply for individual material variants / geometries / shades. more product data Rapid Layer Technology Components/ accessories

39 INDIVIDUAL PRODUCTS/ASSORTMENTS YZ T pack of 1, 2 or 4 YZ T zirconia blank(s) pack of 1 YZ T DISC zirconia DISC SYSTEM COMPONENTS Coloring with YZ T COLORING LIQUID Bonding with ADIVA LUTING SOLUTIONS Characterization with AKZENT Plus Individualization with VM 9 more information: chapter Components/Accessories

40 YZ HT precision esthetics BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology SUPRINITY FC SUPRINITY PC YZ HT is a highly translucent zirconia that is particularly suited to monolithic fabrication, due to its immense strength (approx. 1,200 MPa) and effective light-transmitting properties. The material is a cost-effective and esthetic alternative to non-precious metal and partially veneered metal ceramics. For exact shade reproduction, there is a system of matched components available for YZ HT. FACTS & FEATURES YZ HT is: a highly translucent zirconia for monolithic bridge restorations Dental practices/laboratories benefit from: accurate results, thanks to high edge stability and precision-fit sintering excellent esthetic potential, thanks to a high level of translucency tooth-colored blanks, enabling efficient fabrication of monolithic restorations restorations that preserve natural tooth structure, as the wall thickness can be reduced tailored components (e.g. liquids, stains) for exact shade reproduction YZ HT is: primarily suitable for monolithic anterior and posterior bridge restorations IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT more information: YZ concept brochure more product data Components/ accessories

41 BASIC INFORMATION Recommended indications* Primarily for high-strength monolithic bridge restorations: monolithic anterior and posterior bridges ideal in restoration cases where space is limited Process steps 3-step material: CAM fabrication followed by sintering and glaze firing Optional: partial / full veneering in the visible area System compatibility YZ HT SYSTEM SOLUTIONS** offers YZ T with a specific holder system for the CAD/CAM system: inlab MC XL family and CEREC MC XL family (Sirona Dental Systems GmbH)* MyCrown Mill (FONA Dental s.r.o.) YZ HT UNIVERSAL SOLUTIONS** offers YZ HT in a universal DISC geometry (Ø 98.4 mm) for the CAD/CAM systems: CORiTEC line (imes-icore GmbH) DMG ULTRASONIC line (DMG Mori AG) Röders RXD line (Röders GmbH) inlab MC X5 (Sirona Dental Systems GmbH) Note: In principle, YZ HT DISCs can be processed using all open CAD/CAM systems that are suitable for milling discs with a diameter of 98.4 mm (including the circumferential groove). *) These are recommended indications; generally, a considerably more comprehensive range of restoration types is possible. For details, please refer to the respective working instructions of the products. **) Note: The range of CAD/CAM material versions/geometries/shades available may vary for individual CAD/CAM system partners or systems.

42 Available shades YZ HT blanks are available as YZ HT White : non-colored (white) for individual coloring with YZ HT SHADE LIQUIDs YZ HT Color : precolored in 1M2, 2M2 and 3M2 (only as DISC geometry size) YZ HT Color : precolored in A1, A2 and A3 (only as DISC geometry size) Geometries BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife YZ-20/19 YZ-40/19 YZ-55/19 YZ-65/25 10 mm > 12 mm > 14 mm > 16 mm > 18 mm > 20 mm > 25 mm YZ HT SUPRINITY PC SUPRINITY FC YZ HT block YZ-20/19: 20 x 19 x 15.5 mm, YZ-40/19: 39 x 19 x 15.5 mm, YZ-55/19: 55 x 19 x 19 mm, YZ-65/25: 65 x 25 x 22 mm IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT DISC Ø 98.4 mm in heights of h 10 mm*/h 12 mm*/h 14 mm/h 16 mm*/h 18 mm/h 20 mm/h 25 mm* *) Minimum order quantities apply for individual material variants / geometries / shades. Rapid Layer Technology more product data Components/ accessories

43 INDIVIDUAL PRODUCTS/ASSORTMENTS YZ HT Pack of 1, 2 or 4 YZ HT zirconia blank(s) Pack of YZ HT DISC containing 1 zirconia blank SYSTEM COMPONENTS Coloring with YZ HT SHADE LIQUID Bonding with ADIVA LUTING SOLUTIONS Characterization with AKZENT Plus stains Individualization with VM 9 more information: chapter Components/Accessories

44 Rapid Layer Technology Composite bridges with the click of a mouse. BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Rapid Layer Technology SUPRINITY FC SUPRINITY PC Using a digital manufacturing process, a fully anatomical bridge restoration is fabricated from a zirconia substructure and a feldspar ceramic veneer structure. The fabrication processes for both structures have been matched to one another, so that the anatomically reduced substructure provides excellent support for the veneer. Both CAM structures are connected using luting composite. FACTS & FEATURES Rapid Layer Technology is: a computer-assisted manufacturing technique for the fabrication of fully anatomical composite bridges Dental practices/laboratories benefit from: time and cost savings through the digital manufacturing process high reliability and minimized risk of chipping, thanks to monolithic veneer structure simple CAD/CAM fabrication process and reliable composite bond Rapid Layer Technology is: primarily suitable for fully anatomical posterior composite bridges IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT more information: RLT concept brochure 1766 more product data Components/ accessories

45 BASIC INFORMATION Recommended indications* Suitable for fully anatomical posterior composite bridges with up to four units Process steps 2-step process: CAM fabrication of substructure and veneer structure and sintering of the substructure luting composite is used for bonding both structures. System compatibility Rapid Layer Technology SYSTEM SOLUTIONS offers suitable CAD/CAM materials with a special holder system for the CAD/CAM system: inlab (Sirona Dental Systems GmbH) *) These are recommended indications; generally, a considerably more comprehensive range of restoration types is possible. For details, please refer to the respective working instructions of the products.

46 Available shades YZ T blanks as YZ T White : non-colored (white) for coloring with YZ T COLORING LIQUIDs YZ T Color : precolored in the shade/lightness level Color LL1/light BLOCS blanks SYSTEM 3D-MASTER 1M1C (only BLOCS Mark II), 1M2C, 2M2C and 3M2C BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife Geometries YZ T-40/19 I-40/19 TF-40/19 Rapid Layer Technology SUPRINITY PC YZ T for substructures: YZ-40/19: 15.5 x 19 x 39 mm SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS BLOCS for veneer structures: I-40/19: 15.5 x 19 x 39 mm CAD-Waxx YZ T BLOCS for veneer structures: TF-40/19: 15.5 x 19 x 39 mm YZ HT more product data Components/ accessories

47 INDIVIDUAL PRODUCTS/ASSORTMENTS Rapid Layer Technology pack of 2 YZ T zirconia blanks pack of 2 BLOCS Mark II/TriLuxe forte feldspar ceramic blanks SYSTEM COMPONENTS Coloring with YZ T COLORING LIQUID Bonding with recommended bonding/adhesive systems Characterization with AKZENT Plus more information: chapter Components/Accessories

48 Shade determination System components / accessories Best solutions during processing For digital shade determination, use Easyshade V, and for traditional shade determination, the Linearguide 3D-MASTER or classical A1 D4 can be used. BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife CAD/CAM fabrication Shade modification* Firing* Polishing Luting For CAD/CAM fabrication, offers you highly esthetic feldspar ceramic, high-strength glass ceramic, innovative hybrid ceramic materials, and zirconia simply select the best material solution for your individual requirements. For feldspar, glass ceramics and zirconia, use AKZENT Plus stains and the VM 9 or VM 11 veneering ceramics. Use ENAMIC STAINS for the hybrid ceramic and VM LC flow for individualization. Glaze, stains and/or dentine and crystallization firing are best carried out with the VACUMAT 6000 M or the SMART.FIRE. It is recommended to use the ZYRCOMAT 6000 MS for sinter firing. Note: When using hybrid ceramic, firing must not be carried out. In the case of feldspar ceramics, use polishing systems suitable for silicate ceramics (e. g. Karat diamond polishing set). For glass and hybrid ceramics, ideally, SUPRINITY / ENAMIC polishing sets should be used. When bonding feldspar, glass, hybrid, and zirconia ceramics, you can use ADIVA LUTING SOLUTIONS or an alternative bonding system recommended by. SUPRINITY PC SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT Rapid Layer Technology *) Note "Optional process steps/firing:" The feldspar and hybrid ceramic materials can be seated directly after milling and polishing. The process steps mentioned above are optional for feldspar ceramic. The same steps are required for the hybrid ceramic, but with the hybrid ceramic, firing must not be carried out. When zirconia is used, sinter firing is carried out prior to characterization/individualization. more product data Components/ accessories

49 System components BLOCS system components Karat diamond polishing set For high gloss polishing ceramic restorations. Contains diamond polishing paste, 20 diamond felt wheels and one nickel-plated mandrel. AKZENT Plus Fluorescent stains made of glazing and masking materials. Available as powder, paste or spray. VM 9 Veneering material for individualizing BLOCS restorations following cut-back and YZ substructures. ENAMIC system components ENAMIC Polishing Set clinical/technical 2-stage polishing system with a total number of eight preand high-gloss polishers for the contra-angle or the handpiece. ENAMIC STAINS KIT Includes six light-curing stains and accessories for the reproduction of natural shade nuances of ENAMIC restorations. VM LC flow Light-curing, low-viscous composite materials for individualizing restorations made of ENAMIC, for example.

50 SUPRINITY system components SUPRINITY Polishing Set clinical/technical 2-stage polishing system with a total number of six (clinical) or eight (technical) pre- or high-gloss polishers for the contra-angle or the handpiece. AKZENT Plus see Product information VM 11 Veneering material for individualizing SUPRINITY PC. Available as CREATIVE KIT with 26 EFFECT materials or DENTINE KIT with 10 materials. BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SUPRINITY PC SUPRINITY FC YZ T system components YZ T COLORING LIQUID Liquids in four shade nuances for individually coloring YZ T substructures. AKZENT Plus see Product information VM 9 see Product information IMPLANT CAD-Temp SOLUTIONS BLOCS Mark II CAD-Waxx YZ HT system components YZ HT SHADE LIQUID Liquids in 14 shades for individual characterization of monolithic YZ HT restorations. YZ T YZ HT AKZENT Plus see Product information VM 9 see Product information more product data Rapid Layer Technology Components/ accessories

51 Accessories SHADE DETERMINATION/EVALUATION SIMULATE Preparation Material Light-curing composite materials (in 6 shades) for the fabrication of artificial dies to simulate the shade of the prepared tooth. Easyshade V For digital shade determination within seconds (results in shade standards, such as SYSTEM 3D-MASTER, classical A1-D4 and many others). Linearguide 3D-MASTER With this guide you can determine the correct tooth shade quickly and accurately in just two steps. classical A1-D4 shade guide Simple shade selection using direct comparison of shade samples with the natural tooth in a single step. UNITS FOR FIRING VACUMAT 6000 M Fully automatic premium firing unit for crystallization and stains firing, as well as firing veneering materials in a compact design. ZYRCOMAT 6000 MS High-speed sintering furnace for ZrO 2 - and AlO 2 -based dental ceramic substructure materials. Convenient one-touch operation with vpad control panels. SMART.FIRE Firing unit developed specifically for dental practices for crystallization, glaze, stain and corrective firing of all common chairside materials.

52 MATERIALS FOR BONDING ADIVA FULL-ADHESIVE Fully adhesive bonding system with all the components required for the conditioning of tooth substance and restoration materials made of feldspar, glass, hybrid ceramic, zirconia, composite and metal. ADIVA SELF-ADHESIVE Self-adhesive bonding system with all the components required for the conditioning and bonding of restoration materials made of feldspar, glass, hybrid ceramic, zirconia, composite and metal. ADIVA TE-CEM Dual-hardening, translucent resin cement for temporary bonding of restorations. ADIVA T-BOND SET Dual-hardening bonding system for a secure bond between the bonding composite and the tooth substance. ADIVA TOOTH-ETCH Phosphoric acid gel, 37%, with blue coloring, for etching tooth substance. ADIVA CERA-ETCH Hydrofluoric acid gel, 5%, with red coloring, for etching feldspar, glass and hybrid ceramic restorations. Intended for extraoral use only! ADIVA OXY-PREVENT Neutral-colored glycerine gel to prevent the formation of an oxygen inhibition layer. Can also be used as a try-in paste. ADIVA C-PRIME Silane bonding agent for creating a chemical bond between feldspar, glass and hybrid ceramic restorations, and adhesive composite. ADIVA ZR-PRIME Bonding agent for creating a chemical bond between sintered zirconia restorations and adhesive composite. ADIVA M-PRIME Bonding agent for creating a chemical bond between metals/alloys and adhesive composite. BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SUPRINITY PC SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS CAD-Waxx YZ T YZ HT Rapid Layer Technology more product data Components/ accessories

53 CAD/CAM MATERIALS Bonding recommendations CAD/CAM Material class Material BLOCS Silicate ceramic ENAMIC Hybrid ceramic SUPRINITY PC Zirconia-reinforced Lithium silicate ceramic YZ T 3 Zirconia YZ HT 3 Zirconia Type of bonding adhesive self-adhesive conventional 1 X 1 X 2 recommended possible X not possible Silicate ceramic Glass ionomers: not possible Adhesive materials: ADIVA F-CEM ( Zahnfabrik), Variolink Esthetic (Ivoclar Vivadent), Multilink Automix (Ivoclar Vivadent), Vitique (DMG), NX3 (KerrHawe), Calibra (DENTSPLY), RelyX Ultimate (3M ESPE), Bifi x QM (VOCO), Clearfil Esthetic Cement (Kuraray), DuoCem (Coltène/Whaledent) Self-adhesive materials: ADIVA S-CEM ( Zahnfabrik) Hybrid ceramic Glass ionomers: not possible Adhesive materials: ADIVA F-CEM ( Zahnfabrik), Variolink Esthetic (Ivoclar Vivadent), Multilink Automix (Ivoclar Vivadent), Vitique (DMG), NX3 (KerrHawe), Calibra (DENTSPLY), RelyX Ultimate (3M ESPE), Bifi x QM (VOCO), Clearfil Esthetic Cement (Kuraray), DuoCem (Coltène/Whaledent) Self-adhesive materials: ADIVA S-CEM ( Zahnfabrik) Zirconia-reinforced lithium silicate ceramic Glass ionomers: Ketac CEM (3M ESPE); Vivaglass CEM (Ivoclar Vivadent), GC FujiCem (GC Dental) Adhesive materials: ADIVA F-CEM ( Zahnfabrik), Variolink Esthetic (Ivoclar Vivadent), Multilink Automix (Ivoclar Vivadent), Vitique (DMG), NX3 (KerrHawe), Calibra (DENTSPLY), RelyX Ultimate (3M ESPE), Bifi x QM (VOCO), Clearfil Esthetic Cement (Kuraray), DuoCem (Coltène/Whaledent) Self-adhesive materials: ADIVA S-CEM ( Zahnfabrik) Zirconia 3 Glass ionomers: Adhesive materials: Ketac CEM (3M ESPE), Vivaglass CEM (Ivoclar Vivadent), GC Fuji I ( GC Dental) ADIVA F-CEM ( Zahnfabrik), Variolink Esthetic (Ivoclar Vivadent), Multilink Automix (Ivoclar Vivadent), PANAVIA F2.0 (Kuraray), PANAVIA 21 (Kuraray) Self-adhesive materials: ADIVA S-CEM ( Zahnfabrik), RelyX Unicem 2 (3M ESPE), PANAVIA SA Cement Plus (Kuraray) Please note: 1) In the case of silicate ceramics and hybrid ceramics, self-adhesive luting composites may only be used for crowns. 2 ) Conventional bonding materials (Ketac CEM, 3M ESPE; Vivaglass CEM, Ivoclar Vivadent, GC Fuji I, GC Dental) may be used exclusively for crowns on natural teeth. The preparation requires retentive surfaces for conventional cementation and - based on the preparation guidelines - the anatomical shape must be reduced while adhering to the minimum layer thickness indicated. With conventional bonding, the bond is almost exclusively achieved by static friction between the bonding material and the restoration, and between the bonding material and the preparation. To achieve the required static friction, retentive preparation with a preparation angle of approx. 4 6 and the application of ADIVA CERA-ETCH to the respective ceramic surfaces (for 20 seconds) are required. 3 ) High-strength oxide ceramics cannot be etched using hydrofluoric acid gel and must be sandblasted with Al 2 O 3 (50 µm) at a maximum pressure of 2 bar prior to bonding to increase the retention. The phosphate monomer contained in the composites/primers will create a chemical bond between the sandblasted oxide ceramic surface and the composite. Adhesive bonding is recommended for short stumps ( 4 mm).

54 We are here to help More information on products and processing is also available at Hotline Sales Support Tel. +49(0)7761 / , Fax +49(0)7761 / a.m. to 5 p.m. Mr. Udo Wolfner and his team (Internal Sales Department) will be glad to assist you with orders or questions about the delivery, product data and marketing materials. contact You can your questions and requests to info@vita-zahnfabrik.com! Technical Hotline Tel. +49(0)7761 / , Fax +49(0)7761 / a.m. to 5 p.m. If you have technical questions concerning the CAD/CAM product solutions, you can contact our technical specialists Mr. Ralf Mehlin or Mr. Daniel Schneider. Components/ accessories Rapid Layer Technology YZ HT YZ T CAD-Waxx BLOCS Mark II BLOCS ENAMIC TriLuxe/TriLuxe forte/reallife SUPRINITY PC SUPRINITY FC IMPLANT CAD-Temp SOLUTIONS

55 For smaller, esthetic reconstructions Feldspar ceramic, monochromatic 1-step material For highly esthetic reconstructions in the visible area Feldspar ceramic, multichromatic 1-step material For minimally invasive reconstructions and anterior /posterior crowns: Hybrid ceramic mono/multichromatic 1-step material For a wide indication range Glass ceramic, precrystallized 2-step material For smaller, esthetic reconstructions Glass ceramic, fully crystallized 1-step material For implant-supported restorations IMPLANT SOLUTIONS 1-2 step materials For temporary crown/bridge restorations Composite 1-step material For drilling templates/digital wax-ups Acrylate polymer 1-step material For framework constructions that offer high load capacity Zirconia, translucent 3-step material For monolithic bridge restorations Zirconia, highly translucent 3-step material For fully anatomical, dual-structure bridges Rapid Layer Technology 2-step process For polishing, characterization, individualization, and much more System components/accessories

56 Best solutions for single tooth restorations Best solutions for implant-supported restorations Best solutions for temporary restorations / Auxiliaries Best solutions for framework constructions / fully anatomical bridges Components/accessories

57 BLOCS Mark II proven a million times over efficient fabrication BLOCS TriLuxe/TriLuxe forte/reallife proven a million times over natural play of colors ENAMIC enormous load capacity Restorations that preserve natural tooth structure SUPRINITY PC high reliability optimized edge stability Single-tooth restorations SUPRINITY FC good stability fast processing: IMPLANT SOLUTIONS efficient fabrication of implant suprastructures Implant prosthetics CAD-Temp cost-effective fabrication of temporaries good long-term stability CAD-Waxx simple, digital modelling computer-aided fabrication of templates Temporary restorations/ auxiliaries YZ T precise results high reliability YZ HT precise results high translucency Rapid Layer Technology fabrication in a short time high reliability Framework constructions/ fully anatomical bridges matched system components Accessories