Implantology. Perfect results effortlessly

Transcription

1 Implantology Perfect results effortlessly Precision and working efficiently with first-class materials is in demand. For the benefit of the patient as well as advantageous for dentists and dental technicians.

2 The ideally harmonised working and setting time of AFFINIS enables you to work safely and efficiently. After positioning the impression tray, gently press the tray and hold it in place during the short setting time. The impression can be easily removed due to its high tear strength to ensure that all details are captured. An impression with perfect reproduction of the marginal contours and a dimensional change of up to 0.2 % provides the ideal starting situation for the dental technician to produce accurate restorations. AFFINIS Innovative surface affinity and flow properties lead to perfect results. Innovative surface affinity. AFFINIS has set a new standard due to its fast wetting of mixed material to moist tooth structure and gingival tissue. 1 AFFINIS Superior flow properties. Due to the structural properties of its surfactant system, AFFINIS provides a very low flow limit (self-contouring consistency). With flow properties similar to hydrocolloids, it flows very well without pressure (tray material) into all critical areas. At the same time, the mixed material delivers sufficient stability and does not drip from the preparation. AFFINIS light body AFFINIS regular body Thanks to the innovative surface affinity and superior flow properties of the AFFINIS wash materials (light and regular body), which correspond to the properties of a hydrocolloid, air voids which can result in distortions in the restoration area can be virtually eliminated. Screwing in the impression post for a closed impression. Checking the location of the impression post. Brushing the President impression tray with Coltène Adhesive. Repositioning caps set on the impression post. 2

3 AFFINIS 360 MonoBody is available in both self-activating 360 ml foil bags for dynamic mixing machines and in 75 ml Automix cartridges for the hand dispenser. The AFFINIS MonoBody single-phase impression material has been developed as a tray and syringe material. It has excellent wetting properties in a moist environment. The AFFINIS surface affinity is comparable with the hydrophilic properties of a polyether or hydrocolloid. AFFINIS MonoBody Impressively free of voids. The first single-phase impression material with an innovative AFFINIS surface wetting system for perfect impressions in a moist environment. 2 AFFINIS MonoBody Snapset prevents inaccuracies due to movement. Outstanding thixotropy stable, flows under pressure Neutral taste Superior flexibility easy removal, also from the model Dimensionally stable even after disinfection IMPORTANT: Check the setting of the impression, also intraorally, before removing from the mouth. Higher temperatures will accelerate the setting process, while lower temperatures will slow this down. 60s 60s 2min 30s Filling the impression tray with AFFINIS MonoBody. Syringing around the impression posts using AFFINIS MonoBody. Positioning of the tray in the mouth. The tray is then pressed into place for 2-3 seconds and held until the material is completely set. Carefully remove the impression from the mouth. 3

4 AFFINIS PRECIOUS delivers excellent detail readability. The unique Silver and Gold pigmentation significantly reduces the light scatter and improves the visual perception of detail. AFFINIS Precious Superior flow properties where it counts - in the mouth... AFFINIS PRECIOUS polyvinylsiloxane (PVS) wash materials have a contact angle of only 10 degrees. Its superior flow properties enable the impression material to easily register all critical surface details of the preparation, even in a moist environment. 3 AFFINIS Precious AFFINIS PRECIOUS has been developed to achieve highly accurate results in the mouth and in the laboratory. Immediate wetting of the impression surface enables the plaster to flow more easily in order to produce more accurate stone models. TIP: For a longer working time, the material can be placed in the refrigerator before use. IMPORTANT: To guarantee a perfect bond between both materials when a putty wash impression is taken, the first impression (heavy body, Putty or MonoBody) must be cleaned carefully using lukewarm water, and dried. AFFINIS PRECIOUS light body AFFINIS PRECIOUS regular body Consistency of AFFINIS PRECIOUS. A perfect impression with AFFINIS PRECIOUS regular body and AFFINIS heavy body. Unscrewing the impression post. Screwing in the gingival formers which correspond to the dimensions of the final restoration. Screwed in gingival former. Introduction of the temporary clamp. 4

5 The low polymerization temperature prevents irritation to the pulp and avoids any discomfort to your patient. Your patient can lean back, relax and remain cool thanks to a simple and quick fabrication of the temporary restoration. Cool Temp NATURAL Temporary crown and bridge material Thanks to its optimal elastic phase, Cool Temp NATURAL can be removed from the mouth even after a very short oral setting time. The result is an accurate temporary restoration that can be finished and polished without difficulty. 4 Cool Temp NATURAL EXCELLENT ESTHETICS 3 fluorescent Vita TM * colours USER FRIENDLY Low shrinkage = better marginal adaptation Very good polishing properties COOL POLYMERIZATION TEMPERATURE Low temperature = no harm / irritation to the pulp 35s 30-40s 4min 30s Filling the putty matrix with Cool Temp NATURAL for the temporary restoration. Insertion of the filled putty matrix into the mouth. After a short oral setting time, Cool Temp NATURAL has an elastic consistency which allows easy removal from the mouth with the putty matrix. Once the temporary restoration has cured completely, it can be finished and polished without any difficulty. Cementing the Cool Temp temporary restoration with TempoSIL. TIP: To simplify removal of Cool Temp NATURAL, the preparation can be coated with Coltène Separator before application. SIMPLE AND FAST REPAIRS: Synergy Flow is ideal for repairing small defects and modifying crown margins. IMPORTANT: Cool Temp NATURAL can be used as a temporary restoration for implant treatments, if an abutment is screwed onto the suprastructure. 5 *Vita is not a trade mark of Coltène/Whaledent

6 With the new smooth, whipped cream consistency of JET BLUE BITE, the patient can occlude naturally without feeling any resistance. The material is applied directly from the cartridge using a special spreader tip. The very brief, patient-friendly oral setting time ensures for a quick bite situation. After the bite registration has cured, JET BLUE BITE has a high end hardness of 89 Shore A. Jet Blue Bite Bite registration material Excellent handling as well as fast accurate setting. 5 Jet Blue Bite Stays exactly where you want it No bite resistance, no rebound High end hardness and still flexible for easy trimming Pick your ideal speed: Fast 30 s working time 40 s oral setting time Superfast 20 s working time 30 s oral setting time IMPORTANT: After setting and removal of the material from the mouth, all gingival contacts and undercuts should be removed using a sharp knife or bur. This prevents rebounding of the models when they are set up in the articulator. 30s 40s Application of JET BLUE BITE on the lower, fourth quadrant. Thanks to its whipped cream consistency, the patient can occlude comfortably without resistance. The oral setting time is only 40 s. After JET BLUE BITE has set, the bite registration can be removed without leaving any residue. JET BLUE BITE is a trade mark of Coltène/Whaledent in the USA. JET BLUE is an internationally registered trade mark of Coltène/Whaledent AG (without USA) 6

7 The PINDEX system offers you plenty of decisive advantages for the fabrication of your model and dies. The impression can be casted trouble-free prior to the placement of pins. The precision pins and sleeves can always be inserted absolutely parallel thanks to accurate drilling, so that easy removal and repositioning of the stumps can be guaranteed. The pins are not guided by the base of the plaster stone model, but rather by the precision sleeves made of plastic or metal. This means that there is no abrasion of the plaster stone model. Pindex Model precision without compromise Simple, fast and secure placement of the pins thanks to laser technology. 6 Pindex Bright laser beam for accurate determination of the drill position Best visibility under all light conditions for fatigue-free work Laser light that is superior to conventional light sources TIP: Briefly rinsing the impression with a cleansing agent and thorough rinsing afterwards with water will reduce the surface tension and simplify casting. [PINDEX model system] [ACCUTRAC model system] Placement of PINDEX pins with sleeves. Completed PINDEX model with laboratory implants. Model is directly removed from the ACCUTRAC acrylic glass frame. Completed ACCUTRAC model with laboratory implants. Casting the impression with superhard plaster stone model. A matrix for the GI-MASK is produced using Lab Putty on the stone model. The area of the stone model to be reproduced by GI-MASK can be reduced using a plaster carving knife. Injection holes and outlet sprues for GI-MASK can be produced using a carving knife in the area of the implants. 7

8 GI-MASK Automix New Formula is used for accurate reproduction of soft tissue structures. The A-Silicone gingival mask delivers all information for the exact design of suprastructures or frameworks. Esthetic colouring of the gingival mask helps you to better assess the clinical situation. Gi-Mask New Formula Facilitates perfect esthetics, perfect function and periodontal hygiene in dental restorations. Quick and easy fabrication: GI-MASK Automix New Formula is automatically mixed and applied directly from the cartridge. Its convenient working time of 2 minutes, as well as its short setting time of 7 minutes enables fast production of the gingival mask. 7 Gi-Mask New Formula Flexible and tear-resistant: The gingival mask is exposed to high stresses due to repeated insertion and removal during the production of the restoration. GI-MASK Automix New Formula provides ideal elasticity and a high tear strength to enable trouble-free completion of the work. NOTE: GI-MASK is also available in a C-Silicone handmix (see ordering information). 2min 7min The Lab-Putty matrix is isolated using GI-MASK universal separator. Inject GI-MASK using the mixing and application tip in the corresponding hole, until the material escapes from the opposite hole. After the setting time, remove the matrix and separate the retention between the injection holes and the outlet sprues using a scalpel. Remove excess and distortions using a rotating instrument for silicone at a low speed. 8

9 GI-MASK Automix New Formula can be injected directly into the impression. The laboratory implants are covered approx. 5 mm high using the application tip. Easy to grind and cut. Due to its optimum stability, the gingival mask can be accurately cut using the silicone trimmer bur included in the starter kit or with a scalpel. PLACE MARKERS: Place a thin wax layer around the visible segment of the impression post, up to the screwed-on analogue (place marker). The same thing can also be done on places inside the impression where the bridge units will be applied later. This saves you the time involved to grind or cut the gingival mask. The GI-MASK gingival mask can be easily removed from the master model and repositioned. The PINDEX sleeves are positioned onto the glued pins. The model is cut into segments using the PINDEX saw. The critical requirements for the articulation of the model have been fulfilled for precision fabrication of implants. 9

10 ParaCem Universal DC is a dual cure universal composite resin cement for cementation of indirect restorations, including crowns, bridges, inlays/onlays, veneers and root canal posts (all materials such as ceramics, metal, composite). ParaCem Universal DC is a user-friendly cement that can also be used as a core build-up material. ParaCem Universal DC A cement that leaves no wishes unfulfilled. Highest performance in esthetics, handling and retention. High shear bond strength durable restoration. ParaCem Universal DC provides excellent retention to enamel and dentin, ensuring for long lasting restorations. An excellent bond is achieved using ParaBond Non-Rinse Conditioner with ParaBond Adhesive. Its dual cure properties provide you the choice to light cure for on command cementation, and also ensures for a complete cure via chemical cure where light may not penetrate. SMOOTH THIXOTROPIC CONSISTENCY Easy handling Easy removal of excess material Can be used for core build-ups material 8 ParaCem Universal DC VITA SHADES SIMPLE SHADE SELECTION HIGH ADHESIVE STRENGTH DURABLE RESTORATION Buccal view of the precise implant crowns. Unscrewing and removing the gingival former. Screwing in the abutments produced by the dental technician. ParaBond Non-Rinse Conditioner is massaged and air-blown. Application of the mixed ParaBond Adhesive A and B afterwards. 10

11 Post and core. High mechanical strength for core build-ups. Crowns and bridges. Easy removal of excess material due to its ideal thixotropic consistency. ParaCem Universal DC has been developed for universal applications. Its smooth consistency and excellent handling properties simplify its use and the removal of excess material. Dose and thoroughly mix ParaCem base and catalyst using a 1:1 ratio. ParaCem Universal DC is applied using a brush on to the inside of the restoration. Checking the contact points and necessary polishing. Final situation from the buccal view. 11

12 1 Page 2: AFFINIS PUTTY System AFFINIS putty soft Base and Catalyst 6531 AFFINIS fast putty soft Base and Catalyst 6535 AFFINIS putty super soft Base and Catalyst System 50/75 each 300 ml each 300 ml each 300 ml 6487 AFFINIS System 360 heavy body Refill pack Base 2 x 300 ml Refill pack Catalyst 2 x 62 ml 6485 AFFINIS System 360 heavy body Starter Kit Base 1 x 300 ml Catalyst 1 x 62 ml Supporting cartridge 1 pc MT/green/clear/white/50/s* 6520 AFFINIS heavy body 75 ml Cartridge MT/turquoise/clear/white/68/s* 6620 AFFINIS fast heavy body 75 ml Cartridge MT/turquoise/clear/white/68/s* 6501 AFFINIS light body 50 ml Cartridge MT/yellow/clear/white/69/s* 6601 AFFINIS fast light body 50 ml Cartridge MT/yellow/clear/white/69/s* 6511 AFFINIS regular body 50 ml Cartridge MT/yellow/clear/white/69/s* 6611 AFFINIS fast regular body 50 ml Cartridge MT/yellow/clear/white/69/s* 2 x 75 ml 8 pc 2 x 75 ml 8 pc 2 x 50 ml 2 x 50 ml 2 x 50 ml 2 x 50 ml ACCESSORIES 50/75 System 6900 Dispenser 50/75 ml 1 pc 6550 MT/yellow/clear/white/69/s* 40 pc 6552 MT/turquoise/clear/white/68/s* 40 pc 6555 Oral Tips, yellow 100 pc ACCESSORIES System Supporting cartridge 1 pc 6161 MT/green/clear/white/50/s* 40 pc microsystem TM 6500 AFFINIS light body microsystem microsystem cartridge MT/green/green/white/70/s* Oral Tips 6600 AFFINIS fast light body microsystem microsystem cartridge MT/green/green/white/70/s* Oral Tips 6510 AFFINIS regular body microsystem microsystem cartridge MT/clear/clear/white/70/s* Oral Tips 6610 AFFINIS fast regular body microsystem microsystem cartridge MT/clear/clear/white/70/s* Oral Tips 4 x 25 ml 4 x 25 ml 4 x 25 ml 4 x 25 ml ACCESSORIES microsystem 6270 microsystem Dispenser MK II 1 pc 6214 MT/clear/clear/white/70/s* 40 pc 6202 MT/green/green/white/70/s* 40 pc 6210 Oral Tips 100 pc 2 Page 3: AFFINIS MonoBody System 50/ AFFINIS MonoBody 75 ml Cartridge MT/turquoise/clear/white/68/s* 2 x 75 ml 8 pc ACCESSORIES 50/75 System 6900 Dispenser 50/75 ml 1 pc 6550 MT/yellow/clear/white/69/s* 40 pc 6552 MT/turquoise/clear/white/68/s* 40 pc 6555 Oral Tips, yellow 100 pc System AFFINIS System 360 MonoBody Refill pack Base Refill pack Catalyst 6480 AFFINIS System 360 MonoBody Starter Kit Base Catalyst Supporting cartridge MT/green/clear/white/50/s* 2 x 300 ml 2 x 62 ml 300 ml 62 ml 1 pc ACCESSORIES System Supporting cartridge 1 pc 6161 MT/green/clear/white/50/s* 40 pc * MT = Mixing Tips, S = STRAIGHT 12

13 3 Page 4: AFFINIS Precious microsystem TM 6779 AFFINIS PRECIOUS light body microsystem 25 ml microsystem cartridge 4 pc MT/green/green/white/70/s* Oral Tips 6780 AFFINIS PRECIOUS regular body microsystem 25 ml microsystem cartridge 4 pc MT/clear/clear/white/70/s* Oral Tips ACCESSORIES microsystem 6270 microsystem Dispenser MK II 1 pc 6214 MT/clear/clear/white/70/s* 40 pc 6215 MT/clear/clear/white/70/s* 100 pc 6202 MT/green/green/white/70/s* 40 pc 6205 MT/green/green/white/70/s* 100 pc 6210 Oral Tips 100 pc System AFFINIS PRECIOUS light body 50 ml 50 ml cartridge 2 pc MT/yellow/clear/white/69/s* 6776 AFFINIS PRECIOUS regular body 50 ml 50 ml cartridge 2 pc MT/yellow/clear/white/69/s* ACCESSORIES 50/75 System 6900 Dispenser 50/75 ml 1 pc 6550 MT/yellow/clear/white/69/s* 40 pc 6555 Oral Tips, yellow 100 pc 4 Page 5: Cool Temp Natural 5815 Cool Temp Natural A1 Single Pack - 50ml Cool Temp Natural cartridge A1 MT/BLUE/CLEAR/WHITE/77/P* 5805 Cool Temp Natural A2 Single Pack - 50ml Cool Temp Natural cartridge A2 MT/BLUE/CLEAR/WHITE/77/P* 5810 Cool Temp Natural A3.5 Single Pack - 50ml Cool Temp Natural cartridge A3.5 MT/BLUE/CLEAR/WHITE/77/P* 1 x 50 ml 1 x 50 ml 1 x 50 ml 5820 Cool Temp Natural Automix 5ml A1 Refill 10ml Cool Temp Natural Automix syringe A1 2 x 5 ml MT/BROWN/CLEAR/RED/50/P* 8 pc 5824 Cool Temp Natural Automix 5ml A2 Refill 10ml Cool Temp Natural Automix syringe A2 2 x 5 ml MT/BROWN/CLEAR/RED/50/P* 8 pc 5825 Cool Temp Natural Automix 5ml A3.5 Refill 10ml Cool Temp Natural Automix syringe A3.5 2 x 5 ml MT/BROWN/CLEAR/RED/50/P* 8 pc 13 ACCESSORIES 6900 Dispenser 50/75 ml 1 pc 7774 MT/BLUE/CLEAR/WHITE/77/P* 40 pc 6748 MT/BROWN/CLEAR/RED/50/P* 40 pc * MT = Mixing Tips, S = STRAIGHT

14 5 Page 6: Jet Blue Bite 6491 JET BLUE BITE fast 50ml Cartridge JET BLUE BITE fast MT/PINK/CLEAR/WHITE/84/S* Spreader Tips 6493 JET BLUE BITE superfast 50ml Cartridge JET BLUE BITE superfast MT/PINK/CLEAR/WHITE/84/S* Spreader Tips 6492 JET BLUE BITE fast microsystem TM Cartridge JET BLUE BITE fast MT/CLEAR/CLEAR/WHITE/70/S* Spreader Tips 6494 JET BLUE BITE superfast microsystem TM Cartridge JET BLUE BITE superfast MT/CLEAR/CLEAR/WHITE/70/S* Spreader Tips 1 x 50 ml 6 pc 6 pc 1 x 50 ml 6 pc 6 pc 2 x 25 ml 2 x 25 ml System 50/75 ACCESSORIES 6900 Dispenser 50/75 ml 1 pc 6551 MT/PINK/CLEAR/WHITE/84/S* 40 pc 6223 Spreader Tips 100 pc ACCESSORIES microsystem 6270 microsystem Dispenser MK II 1 pc 6214 MT/clear/clear/white/70/s* 40 pc 6223 Spreader Tips 100 pc 6 Page 7: Pindex Accu-trac PINDEX SYSTEM DRILLING UNITS P113LCE PINDEX LASER System (230V CE approved) P113LUK PINDEX LASER System (230V CE approved) with UK Plug PINDEX SYSTEM ACCESSORIES PX112 Medium Pins and Sleeves (loose fit) 1000 pc PX112T Medium Pins and Sleeves (tight fit) 1000 pc AT6 Starter Kit ACCU-TRAC acrylic glass frame, brown Base plates, white Articulation Spacers Articulator plates, for magnet Recall cards Nameplates 6 pc 6 pc 6 pc 25 pc 25 pc 25 pc PX114 Long Pins and Sleeves 1000 pc PX115 Short Pins and Sleeves 1000 pc PX118 Articulating Pins 100 pc PX119 Carbide Drills 3 pc PX120 Reamer 1 pc PX124 Bulbs PX144 Self Articulating Pins and Sleeves 1000 pc PX145 Self Articulating Pins and Sleeves 100 pc PX145-S Self Articulating Sleeves 1000 pc PX146 Flexible Molds 3 pc PX147 Full Arch Mold 1 pc PX148 Flexible Molds, Right & Left 2 pc PX153 Dual Pins and Sleeves 1000 pc PX154 Dual Pins and Sleeves 100 pc PX155 TRIPLUS Pins and Sleeves 1000 pc PX156 Long TRIPLUS Pins and Sleeves 1000 pc ATR12 REFILL PACK ACCU-TRAC acrylic glass frame, brown Articulator plates, white Nameplates Recall cards ATN50 Transportsystem Transport and delivery containers Nameplates Plastic retainers 50 pc 50 pc 50 pc 50 pc 50 pc 50 pc ACCESSORIES ATK25 Articulator plates for magnets 25 pc Recall cards 25 pc Nameplates 25 pc ATK300 Articulator plates for magnets 300 pc Recall cards 300 pc Nameplates 300 pc ATA20 Locking arms ATT12 Acrylic glass frame, brown ATE12 Base plates, white ATS1 Articulation spacer, green 1 pc ATS20 Articulation spacer, green * MT = Mixing Tips, S = STRAIGHT 14

15 7 Page 8-9: Gi-Mask Automix GI-MASK Automix New Formula 8060 Gi-Mask Automix NF Starter Kit GI-MASK Automix NF cartridge GI-MASK Universal Separator Mixing Tips yellow Oral Tips yellow 8065 GI-MASK Automix NF Refill Kit GI-MASK Automix NF cartridge Mixing Tips yellow Oral Tips yellow 2 x 50 ml 50 ml 2 x 50 ml ACCESSORIES 6550 MT/YELLOW/CLEAR/WHITE/69/S* 40 pc 6555 Oral Tip yellow 100 pc 6900 Dispenser C/W 50/75ml 1 pc 8000 GI-MASK Universal Separator 50 ml 8075 Trimmer for Silicones 1 pc Handmix 8030 Gi-Mask Starter Kit Gi-Mask Base Gi-Mask Activator Gi-Mask Universal Separator Application Tips Accessories 8035 Gi-Mask Single Pack Gi-Mask Base Gi-Mask Activator Application Tips Accessories 8037 Gi-Mask Refill Pack Gi-Mask Base Gi-Mask Activator 150 ml 18 ml 50 ml 150 ml 18 ml 150 ml 18 ml 8036 Gi-Mask Activator 18 ml 8 Page 10-11: ParaCem Universal DC 7485 ParaCem Universal DC IntroKit ParaCem Base A2 ParaCem Base B3 ParaCem Base white opaque ParaCem Catalyst ParaBond Adhesive Refill Pack (7486) Accessories 2.5 g 2.5 g 2.5 g 3 x 2.5 g 7481 ParaCem Base A2 2.5 g 7482 ParaCem Base B3 2.5 g 7483 ParaCem Base white opaque 2.5 g 7484 ParaCem Catalyst 2.5 g ParaBond Adhesive Refill 7486 ParaBond Adhesive Refill ParaBond Non-Rinse Conditioner ParaBond Adhesive A ParaBond Adhesive B 3 ml 3 ml 3 ml 15 * MT = Mixing Tips, S = STRAIGHT

16 Clinical case: E.T. Egloff, Dr.med.dent., M.S.; D. Zweifel, ZTM, St. Gallen, Switzerland UK-FR 2008 Coltène/Whaledent AG Coltène/Whaledent Ltd. The President Suite-A Kendal House, Burgess Hill Victoria Way West Sussex, RH15 9NF/U.K. Tel. +44 (0) Fax +44 (0) Coltène/Whaledent AG Feldwiesenstrasse Altstätten/Switzerland Tel. +41 (0) Fax +41 (0) Coltène/Whaledent Inc. 235 Ascot Parkway Cuyahoga Falls, Ohio 44223/USA Tel Fax