lower extremity fixation system

Transcription

1 lower extremity fixation system

2 fully disposable fixation system InstaFix in the open position Bi-cortical compression when staple is implanted The InstaFix system is a body temperature activated shape memory fixation system indicated for arthrodesis, osteotomies and skeletal fixation procedures. The use of Nitinol, a shape memory alloy, allows InstaFix to provide continious and active bi-cortical compression at the surgical site. sterile kits The InstaFix fixation system is packaged sterile with fully disposable instrumentation, reducing facility costs and time associated with pre and post-operative set management. The InstaFix portfolio includes sizes from 8x8mm to 30x to accommodate a wide range of procedures. Implant & Accessory Kit InstaFix key components Open-window guide allows for maximum visualization of surgical site In-line drill guide for less obstruction during drilling Distal surface used as an optional tamp Staple cap Pre-loaded staple reduces implant handling Sliding window protects staple during insertion

3 1 Prepare the surgical site and use the sizer kit to determine the appropriate size staple. Keep three millimeters from either side of the joint or osteotomy. Utilizing a drill guide, the osteotomy is first drilled distally. 2 Place a pin in the distal hole to maintain position and then drill the proximal hole. NOTE: Ø drill is marked with an 8mm depth indicator Ø & drills are marked with, 15mm and depth indicators. 3 Utilizing the preloaded implant delivery device, place the staple into the predrilled holes. 4 Lift the window on the implant delivery device and pivot away from the staple. 5 Seat the staple using either the distal end of the implant delivery device or manual pressure. 6 Repair is complete. The body s temperature (37 C) activates the staple arms and provides active and continuous compression. Additional staples may be used if necessary.

4 InstaFix system features & benefits Sterile & fully disposable Cost savings for hospital or surgery center Eliminates pre & post-operative set management Body temperature activated Nitinol implant Instantaneous and continuous compression Eliminates the need for external heating Simple alternative to plates & screws Ergonomically designed instrumentation Reduces surgical complexity Provides maximum visualization of surgical site Low profile implant design Helps minimize tissue disruption Offers unobstructed views for post-op X-rays Akin 8 x 8 or 10 x 10 MP Arthrodesis (Metatarsal/Phalange) 10 x 10 or 10 x 15/17 multiple sizes for multiple indications Chevron/Austin Bunion Osteotomy 10 x 10 Lapidus Arthrodesis T (Tarso-Metatarsal) 15 x 15/17 (Dorsal) 20 x 15 (Medial) N/C Arthrodesis (Navicular/Cuneiform) 20 x 15 or 20 x 20 T/N Arthrodesis (Talar/Navicular) 25 x 20 or 30 x 20 Lisfranc Arthrodesis 15 x 15/17 C/C Arthrodesis (Calcanieal/Cuboid) 20 x 15 or 20 x 20 Dwyer Osteotomy (Calcanieal Osteotomy) 20 x 20 Sizes above are recommendations only and will vary according to patient anatomy.

5 ordering information InstaFix Implant Kit Backspan Wire Size Leg Length Catalog No. Description Backspan Leg Length Wire Size Drill Size Use with Accessory Kit mm 8mm 1.2mm mm /17mm mm 15/17mm mm mm mm Optional Sizer Kit Catalog No. Description InstaFix Sizers Accessory Kit Catalog No. Description Kit Size Use with InstaFix implant Kit InstaFix Accessory Kit* InstaFix Accessory Kit* , , , InstaFix Accessory Kit* , , , *Accessory kit contains (1) drill & (2) locating pins

6 OT Medical 1000 Continental Drive Suite 240 King of Prussia, PA Orders: Fax: InstaFix and the OT Medical logo are trademarks of OT Medical, LLC. O Rev.B