ÜBERCLEAN! Introducing the new STATMATIC PLUS.

Transcription

1 ÜBERCLEAN! Introducing the new STATMATIC PLUS.

2 Product Advantages Safe validated cleaning verified by microbiological testing done by an independent laboratory. Economical low purchasing and operating cost. Powerful hard on germs, bacteria and dirt; gentle on your instruments. User Friendly very easy to use. Space Saving the STATMATIC PLUS is designed to save valuable space in the hygiene room. Environmentally Friendly does not use damaging aerosol propellants.

3 Take control... Bacteria, germs and protein can enter the internal components of dental handpieces during routine procedures. If left alone, this material dries up and is very hard to remove. Additionally, the general mechanical complexity of handpieces, with miniature gears, a bur-chuck system and many hollow regions, makes cleaning very difficult. Thorough removal of all biological residues is important in order to avoid damage to the equipment and to ensure the hygienic safety of the personnel and patients.... because the stakes are too high. STATMATIC PLUS was developed specifically to meet the challenges created by the complex design of handpieces. The intelligent electronics regulate different pulses which are matched precisely to the interior workings of the instruments. The process is divided into three phases: 1. Cleaning of the water and air spray channels with STATMATIC PLUS cleaner 2. Cleaning of the drive air channel and hollow cavities with STATMATIC PLUS cleaner 3. Lubrication of all internal components with STATMATIC PLUS dental oil Each phase consists of several pulses during which the respective medium is applied to the inside of the handpiece. For contra-angles or slow-speed handpieces, a micro-motor rotates all components during the operation in order to ensure optimal distribution of the media. Each phase is completed by a thorough purging with compressed air

4 Validated medicinal cleaning The STATMATIC PLUS performs fully automated interior cleaning, which fully conforms with the strict German-based RKI guidelines*. A water-based cleaner is used in order to facilitate the removal of bacteria, germs and protein. In accordance with the American medicinal cleaning norm, ASTM E , a germ/bacteria reduction of at least 2 log increments (i.e. >99% removal) is achieved. This process was tested using a microbiological method and was validated by mdt [Medical Device Testing GmbH], an independent, ZLG-accredited laboratory. (ZLG = German state agency for health protection involving drugs and medications) * Guidelines from the commission for hospital hygiene and infection prevention at the Robert Koch Institute: Prevention of infections in dentistry hygiene requirements (2006) The SciCan Handpiece Reprocessing Cycle 2 min (plus storage time) 10 min Wipe & disinfect handpieces with OPTIM 33TB after initial cleaning under running water. 1 2 STATMATIC PLUS for interior cleaning and care. STATMATIC PLUS is the ideal addition to your hygiene room. A complete handpiece reprocessing cycle is achieved in a fast and safe manner, in combination with manual exterior cleaning and sterilization in an autoclave. 3 8 min (plus drying time) STATIM cassette autoclave for sterilization

5 STATMATIC PLUS Ease of Use The STATMATIC PLUS supports your team with its user-friendfly operation. Set up to three instruments on the provided adapters, close the door, and press the START button. The program requires approx. 3.3 minutes per instrument for interior cleaning and care. Care for your hardware Proper care is very important in order to ensure the longevity of dental instruments. The rotating adapter for contra-angle handpieces ensures even application of the cleaner and protective oil to all mechanical elements and ball bearings. Optimal conditions that let you enjoy the use of your instruments for a long time. Chuck care... Simply position the handpiece under the chuck nozzle, press the button and you are done servicing the chuck. Colour coding and the environmentally friendly propellant gases make it easy to refill the fluid reservoirs quickly and safely.

6 Adapters for STATMATIC PLUS S32101-CX MULTIflex*/CONNEX S32101-ST1T Sirona T1 Highspeeds S32101-NSK NSK Highspeeds Unit specifications Dimensions: (WxHxD) mm: 280 x 345 x 300 mm Weight: 7.3 kg Rated voltage: V Rated frequency: 50/60 Hz Rated power: max. 45 VA Protection class: 1 Ambient temperature: 5-35 C (41-95 F) Noise: 60 (65) db (A) Relative humidity: max 85 % Air pressure: 4,5-6 bar Air consumption: 40 NL/min Compressed air quality: Residual oil content: max. 0.1 mg/m³ Residual dust: max. 1 µm, max. 0.1 mg/m³ Residual water: max. 0.1g/m³ at -40 C STATMATIC PLUS units: S32101-W&H W&H Highspeeds S32101-BA Bien Air Highspeeds * MULTIflex is a registered trademark of KaVo Dental GmbH STATIS high speed handpieces Manufactured by: SciCan GmbH Wangener Strasse Leutkirch GERMANY Tel.: +49 (0) Fax: +49 (0) S32000 STATMATIC PLUS 32 (2 fixed INTRAmatic adapters according to ISO 3964 and one station for highspeeds adapter) S32005 STATMATIC PLUS 33 (1 fixed INTRAmatic adapter according to ISO 3964 and two station for highspeeds adapter) The corresponding adapters have to be ordered separately. Required inputs: 500 ml STATMATIC PLUS cleaner 250 ml STATMATIC PLUS dental oil Absorption Pad (10 pcs.) Accessories: S32100 Absorption Pad (10 pcs.) S32101 STATMATIC PLUS dental oil (2 x 500 ml) S32102 STATMATIC PLUS cleaner (6 x 500 ml) E-STATIS Electronic motor system S10000 STATIS ML S10001 STATIS SL S21200-EU E-STATIS Advantage S21300 E-STATIS Prep For Swiss customers: SciCan Medtech AG Alpenstrasse Zug, Switzerland Tel.: +41 (0) Fax: +41 (0) SENSATIONAL 3 YEAR WARRANTY With its high quality design and long service life, you can rely on STATMATIC PLUS. Quality Made in Germany. STATMATIC, STATCARE and Your Infection Control Specialist are tradmarks of SciCan Ltd. OPTIM, STATIS, STATIM and STATIM cassette autoclave are registered trademarks of SciCan Ltd. SD-361/2-EN 10M 10/2011