SPECIFICATION SHEET FOR COMMERCIAL COMPONENT Part Supplied Shall Meet All Requirements Specified In This Document

Transcription

1 SPECIFICATION SHEET FOR COMMERCIAL COMPONENT Part Supplied Shall Meet All Requirements Specified In This ocument Software: Word ISION RECOR ESCRIPTION RAWN CHECK EE ME ATE AE -004, -006, -013, -015, -060 TO -064 AN -201 TO /08/16 C AE -040 AN /21/16 B AE AUTHORIZE ISTRIBUTOR/SUPPLIER ETAILS /28/16 SPECIFICATION SHEET FOR EPM FOAM & RUBBER TITLE (40 CHARACTERS MAX.) GSKT,EPM TYPE IENTIFICATION ATE OCUMENT NO. RAWN BY 03/30/15 CHECK 03/30/15 ELECT ENGR MECH ENGR 03/30/15 SIZE A SHEET 1 OF 6

2 1.0 PURPOSE This specification defines the ordering information for Ethylene Propylene Rubber (EPM) foam and rubber. EPM is to be procured at the buyer s discretion as long as the material meets the criteria and physical properties described in the sections below. As a suggestion, not a requirement, typically uses Pacific Rubber & Bay Seal as EPM distributors for EPM. These distributor s information is below for your convenience PACIFIC RUBBER & PACKING, INC INUSTRIAL ROA, NO.3 SAN CARLOS, CA / BAY SEAL COMPANY, INC WEST WINTON AVENUE HAYWAR, CA OCUMENT NO. SIZE A SHEET 2 OF 6

3 2.0 ORERING INFORMATION FOAM Criteria: Black, EPM closed cell foam, rectangular strips with standard pressure sensitive adhesive (PSA) on one side Physical Properties of EPM Foam Unit Requirements ensity g/cm 3.08 ± Lb/ft 3 5 ± 1 Hardness, urometer (Shore 00) - 45 ± 5 Compression eflection (25%) kpa 41 ± 14 Compression Set % 40% Tensile Strength kpa 410 Psi 60 Tear Strength kn/m 1.2 Lb/in 6.8 Service Temperature F Low: -70 High Continuous: 220 Water Absorption/Maximum Weight Change % 5% Standard Temperature PSA minimum Properties: : Acrylic (solvent based) double coated tape Liner: #76 (120 g/m 2 ) Polyethylene plastic Service Temperature Range: -40 to 150 F [-40 to 66 C] Shelf Life Conditions: One year at 70 F [21 C], at 50%RH Note: Unless otherwise specified on the drawing, EPM gasket(s) must have 90 degree corners as illustrated below. OCUMENT NO. SIZE A SHEET 3 OF 6

4 3.0 ORERING INFORMATION - RUBBER Criteria: Black, EPM solid rubber, rectangular strips with standard pressure sensitive adhesive (PSA) on one side Physical Properties of EPM Rubber Unit Minimum of: Hardness, urometer (Shore A) - 70 ± 5 Elongation % 200 Tensile Strength kpa 9.6 Psi 1400 Standard Temperature PSA minimum Properties: : Acrylic (solvent based) double coated tape Liner: #76 (120 g/m 2 ) Polyethylene plastic Service Temperature Range: -40 to 150 F [-40 to 66 C] Shelf Life Conditions: One year at 70 F [21 C], at 50%RH Note: Unless otherwise specified on the drawing, EPM gasket(s) must have 90 degree corners as illustrated below. OCUMENT NO. SIZE A SHEET 4 OF 6

5 4.0 EPM RECTANGULAR CROSS SECTION PNS EPM FOAM gaskets with rectangular cross section and thickness of: /8 GSKT,FOAM,EPM,1/8 THK,3/8 WITH /2 GSKT,FOAM,EPM,1/8 THK,1/2 WITH /8 5/8 GSKT,FOAM,EPM,1/8 THK,5/8 WITH -004 ¾ GSKT,FOAM,EPM,1/8 THK, ¾ WITH GSKT,FOAM,EPM,1/8 THK,1 WITH /8 GSKT,FOAM,EPM,1/4 THK,3/8 WITH /2 GSKT,FOAM,EPM,1/4 THK,1/2 WITH /4 5/8 GSKT,FOAM,EPM,1/4 THK,5/8 WITH -013 ¾ GSKT,FOAM,EPM,1/4 THK,3/4 WITH GSKT,FOAM,EPM,1/4 THK,1 WITH /8 GSKT,FOAM,EPM,3/8 THK,3/8 WITH /8 1/2 GSKT,FOAM,EPM,3/8 THK,1/2 WITH /8 GSKT,FOAM,EPM,3/8 THK,5/8 WITH /2 1/2 GSKT,FOAM,EPM,1/2 THK,1/2 WITH /4 3/4 GSKT,FOAM,EPM,3/4 THK,3/4 WITH OCUMENT NO. SIZE A SHEET 5 OF 6

6 -060 3/8 GSKT,FOAM,EPM,1/16 THK,3/8 WITH /2 GSKT,FOAM,EPM,1/16 THK,1/2 WITH /16 5/8 GSKT,FOAM,EPM,1/16 THK,5/8 WITH -063 ¾ GSKT,FOAM,EPM,1/16 THK, ¾ WITH GSKT,FOAM,EPM,1/16 THK,1 WITH EPM RUBBER gaskets with rectangular cross section and thickness of: /8 GSKT,RUBBER,EPM,1/16 THK,3/8 WITH /16 1/2 GSKT,RUBBER,EPM,1/16 THK,1/2 WITH /8 GSKT,RUBBER,EPM,1/16 THK,5/8 WITH /8 GSKT,RUBBER,EPM,1/8 THK,3/8 WITH /8 1/2 GSKT,RUBBER,EPM,1/8 THK,1/2 WITH /8 GSKT,RUBBER,EPM,1/8 THK,5/8 WITH 5.0 EPM FOAM CUT TO PRINT PN S EPM FOAM gaskets, cut to dimensions specified on drawing, with thickness of: Thickness (B) Tol (+/ ) /8 GSKT,FOAM,EPM,1/8 THK -202 ¼ GSKT,FOAM,EPM,1/4 THK /8 GSKT,FOAM,EPM,3/8 THK /16 GSKT,FOAM,EPM,1/16 THK -205 ½ GSKT,FOAM,EPM,1/2 THK OCUMENT NO. SIZE A SHEET 6 OF 6