Degidi Dental Clinic - Bologna, Italy WeldOne & Conometric Combined Course 20-21-22 nd June 2016
Part 1 WeldOne TM Concept COURSE OBJECTIVES The WeldOne Concept, the revolutionary technique invented by the Course Director, allows you to make chairside temporary or final restorations, assembling pre-fabricated dedicated components directly intra-orally by means of the intra-oral WeldOne welding unit. The participants will be able to learn about the numerous different surgical and prosthetic options and through practical exercise develop the necessary skill to create these terrific handcrafted restorations with complete confidence. This Course provides the Certification that is required to begin with the technique.
20 th June 2016 10.00 17.00 10.00 Welcome and introduction Intra Oral Welding: History and background information Electric Resistance Spot Welding: what it is and how it works From Intra Oral welding to the WeldOne concept The WeldOne Welding Unit - Implant Level Restorations Definition of an implant-level prosthesis pro/cons The implant level prosthesis for dental implants made by DENTSPLY Implants Characteristics of an implant-level prosthesis for: - Partial edentulism - Total edentulism Selection criteria of: - Titanium wire - Abutment - Welding power Shaping and bending techniques Most common errors: - How to avoid them - How to correct them 17.00 Conclusion
21 st June 2016 9.00 13.00 9.00 - Abutment-Level Restorations Definition of an abutment-level prosthesis The Durable Restoration Concept Use of abutment-level prosthesis with the ANKYLOS and XiVE implant systems The abutment-level prosthesis for dental implants made by DENTSPLY Implants Characteristics of abutment-level prosthesis for: - Partial edentulism - Total edentulism: the Weld-On-4 Concept Lab steps: - Choice of commercially manufactured teeth - Mounting the teeth - Choice of filling materials - Evaluation of the parameters that affects durablility Hands on: Construction of an abutment-level All on Four framework 13.00 WeldOne Course conclusion Lunch Awarding of the WeldOne concept diplomas
Part 2 Conometric Concept: a new vision of implant prosthetics COURSE OBJECTIVES The main focus of this course will be the Conometric Concept, which, is a new vision of implant prosthetics based on the One Abutment One Time Concept, the use of the Standard abutment and, above all, the use of the new Conometric Copings (designed by Dr Degidi) to create fixed, telescopically retained, single or multiple restorations, immediate or delayed, acrylic, monolithic or ceramic made. These outstanding restorations are extremely precise, cement-less, easy-tomake, biologically driven and cost-effective: they really represent the new standard in implant prosthetics. Course participants will acquire all that they need to achieve these remarkable results through theory presentations, practical work, and by observing live procedures carried out by the Course Director.
21 st June 2016 14.00 18.00 The Ankylos Implant System with single elements: - Surgical tips and tricks - Healed sites and extraction sites - Parameters that affect primary stability - One Abutment Once Concept - One Abutment Fits All Concept - Chamber Concept: Guidelines - Importance of biotype and how to modify it - Buccal plate management - Treating sites with compromised buccal plate - Temporary and final conometric crowns: hot to select the appropriate restorative material - Hands-on: the Chamber Concept Learn the following: - How to select the appropriate abutment - How to select the appropriate conometric abutment - How to use dedicated instruments to correctly pack biomaterial in the peri-implant gaps - Video or live surgery: immediate implantation and restoration for a single compromised tooth
22 nd June 2016 9.00 17.00 The Ankylos Implant System and the Conometric Concept: - How to make a fixed restoration using the Conometric Concept (CC) - Advantages of conometric retained restorations: simplicity, precision, retrievability, maintenance, cost - Limits of cemented and screw-retained restorations - Conometric restorations with immediate loading - Conometric restorations in staged loading approach - Acrylic/composite conometric restorations - Ceramic/zirconia/disilicate conometric restorations - Dedicated conometric components for standard abutments - Dedicated conometric components for Syncone abutments - The CC and single implant restorations - The CC and multiple implant restoration (partial or fully edentulous) - The CC and Cad Cam in house milling techniques: synergies between digital and analogic concepts - Hands-on: - Achieve the appropriate engagements with conometric abutments; - Achieve appropriate parallelism with multiple divergent implants - Learn how to passivate a definitive conometric zirconia bridge
Registration form Please complete the form with block letters, and then send the form and a copy of the bank transfer document to the at the following fax number 0039 051 541514 or by the email: info@degidi.it Name First name Name to appear on the invoice Invoice address Post code City State Phone Fax E-mail Tax n VAT n VIES yes no Registration fee, selected the course: WeldOne and Conometric Combined Course 2.440,00 (VAT included) Transfer reference: "name and first name - cod. WeldCono" WeldOne Course 1.220,00 (VAT included) Transfer reference: "name and first name - cod. WeldOne" Conometric Course 1.220,00 (VAT included) Transfer reference: "name and first name - cod. Cono" Payment should be made by means of a bank transfer to: Dental Building Srl Banca Popolare dell Emilia Romagna - Ag.1, Bologna, Italy IBAN: IT 04J 05387 02401 00000 2076900 BIC: BPMOIT22XXX Date Signature Dental Building Srl, will process all personal data in accordance with the Italian privacy law D.Lsg 196/03. For more information, please go to: info@degidi.it Organisation and location: Degidi Dental Clinic Via Spina, 12 40139 Bologna Italy Tel +39 051 541614 info@degidi.it www.degidieducation.it