Enclosures & Storage

ON-LINE Enclosures & Storage - contents 51 Electrical / Industrial Enclosures 1172 1193 Industrial 1193 Electrical 1200 53 Knobs, Hinges, Latches & Locks 1217 54 Component Storage & Cases 1257 1192 OM = Order Multiple

ORDERLINE 65 6865 3433 Polycarbonate Enclosures Euronord Series II Euronord Series II enclosures are light grey (RAL7035), with a flammability rating of UL94-V2. Temature range of the enclosure material is: short term -40 +120 C, continuous -40 80 C. Fixing holes in bottom for mounting internal equipment The closing screws and the polyurethane gasket ensure a high level of protection within the box Applications: junction boxes, electrical, electronic and industrial equipment IP66/67 rating Lid Colour 50 65 45 Light Grey 219-0149 120 160 90 Light Grey 219-0082 230 300 87 Clear 220-7332 50 219-0149 unit 1+ 28 50 12+ 26 80 25+ 25 60 120 219-0082 unit 1+ 78 50 12+ 74 00 25+ 70 50 230 220-7332 unit 1+ 148 00 12+ 139 00 25+ 133 00 FEX Enclosure FEX Enclosures are light grey (RAL7035), with a flammability rating of UL94-V2. Temature range of the enclosure material is -40 C to +120 C, (+80 C for continuous use). Designed to meet the requirements for use in Zone 1/2 hazardous areas Self extinguishing and impact resistant Resistant to most acids Lids with oil and acid resistant seals and low friction polyamide securing screws Tinned chassis plate included Wall mounting fixings beneath the lid and outside the sealed area IP66/67 rating Note: After incorporation of components, further certification must be obtained before use in zone 1. Approvals: certificate available on request Group & Category: II2 GD EEx e II Certificate No.: VTT 06 ATEX 030U Lid Colour 190 190 130 Grey 220-333 190 190 180 Grey 385-222 190 280 130 Grey 220-349 280 280 130 Grey 220-355 190 280 180 Grey 385-238 280 280 180 Grey 385-244 280 380 130 Grey 220-361 280 380 180 Grey 385-250 190 190 130 Clear 220-377 190 190 180 Clear 385-187 190 280 130 Clear 220-383 280 280 130 Clear 220-399 190 280 180 Clear 385-193 280 280 180 Clear 385-200 280 380 130 Clear 220-406 280 380 180 Clear 385-216 190 220-333 unit 1+ 91 00 12+ 86 50 25+ 83 00 190 385-222 unit 1+ 101 50 12+ 95 50 25+ 91 50 190 220-349 unit 1+ 98 50 12+ 93 50 25+ 90 00 280 220-355 unit 1+ 148 00 12+ 140 50 25+ 134 50 190 385-238 unit 1+ 111 00 12+ 104 50 25+ 100 00 280 385-244 unit 1+ 155 00 12+ 147 00 25+ 141 00 280 220-361 unit 1+ 181 50 12+ 172 50 25+ 165 00 280 385-250 unit 1+ 205 00 12+ 192 50 25+ 184 50 190 a220-377 unit 1+ 83 00 12+ 79 00 25+ 76 00 190 385-187 unit 1+ 86 50 12+ 81 00 25+ 77 50 190 220-383 unit 1+ 93 50 12+ 89 00 25+ 85 00 280 a220-399 unit 1+ 142 00 12+ 135 00 25+ 129 00 190 385-193 unit 1+ 103 50 12+ 97 00 25+ 93 00 280 385-200 unit 1+ 160 00 12+ 150 50 25+ 144 00 280 220-406 unit 1+ 142 00 12+ 133 50 25+ 128 00 280 385-216 unit 1+ 162 50 12+ 1 50 25+ 146 00 MNX Enclosures MNX Enclosures are light grey (RAL 7035), with a flammability rating of UL94-V2. Termature range of the enclosure material is -40 +120 C, (+80 C for continuous use). Enclosures for housing electronic systems and components Unique fixing pod arrangements allow three separate mounting options, including ready moulded guides for quick installation of PCBs Lid centre recessed for mounting membrane keypads Good chemical resistance IP67 rating Choice of Light Grey or Smoked Transparent lids Chassis plates and mounting brackets available separately Note: Boxes available in two base heights. Those where the overall height measurement ends in a "5" have a base height of 25mm. All others have a base height of 50mm. 130 mm Lid Colour 80 35 Grey 280-0701 80 100 Grey 289-6241 130 60 Grey 289-6263 80 35 Clear 280-0818 80 60 Clear 289-6392 100 80 Clear 289-6409 Lid Colour Grey a280-0701 unit 1+ 26 80 12+ 25 20 25+ 24 10 Grey a289-6241 unit 1+ 28 40 12+ 26 70 25+ 25 60 Grey a289-6263 unit 1+ 32 00 12+ 30 10 25+ 28 80 Clear a280-0818 unit 1+ 26 80 12+ 25 20 25+ 24 10 Clear a289-6392 unit 1+ 27 40 12+ 25 80 25+ 24 70 Clear a289-6409 unit 1+ 28 40 12+ 26 70 25+ 25 60 "Quick" Wall Mountable Cabinets Equipped with "Quick" turn screw covers Wall mountable (Brackets listed separately) High impact resistance polycarbonate Grey or smoked transparent lids UL 94-5V flammibility rating IP66/67 rating IK 08 impact resistance rating Standards: UL 508; NEMA type 1, 4, 4X, 12 & 13. Lid Colour 200 300 170 Grey 509-3316 300 300 170 Grey 509-3344 400 600 210 Grey 509-3401 200 300 170 Clear 509-3322 400 400 170 Clear 509-3394 Lid Colour 200 Grey a509-3316 unit 1+ 140 00 12+ 137 00 25+ 133 00 300 Grey a509-3344 unit 1+ 173 00 12+ 169 00 25+ 164 00 400 Grey a509-3401 unit 1+ 481 00 12+ 469 00 25+ 457 00 200 Clear a509-3322 unit 1+ 140 00 12+ 137 00 25+ 133 00 400 Clear a509-3394 unit 1+ 258 00 12+ 2 00 25+ 245 00 Description Wall brackets for all a471-6406 bag of 4 1+ 15 10 10+ 14 70 25+ 13 40 My Account Visit our website for additional price information and exciting promotions 1193

SOLID Series - IP67 All enclosures have a light grey (RAL 7035) body colour. Oating temature range is -40 C to +80 C (+120 C max short term). Polyurethane gasket assures protection within the box Flammability rating: UL 94-5V Delivered with 4 sunken head lid screws and mounting screws for fixing electrical apparatus Can be equipped with chassis plates and a DIN rail for fixing internal equipment Lid Colour 188 188 Grey 188-2370 278 188 Grey 188-2409 278 188 Grey 508-2861 378 188 Grey 508-2877 278 278 Grey 188-2443 278 278 Grey 508-2883 378 278 Grey 188-2471 378 278 Grey 508-2906 558 378 Grey 508-2928 188 188 Clear 188-2386 278 188 Clear 188-2415 378 278 Clear 188-2487 558 378 Clear 508-2849 188 188-2370 unit 1+ 73 50 12+ 68 50 25+ 65 50 278 188-2409 unit 1+ 95 00 12+ 88 50 25+ 84 50 278 508-2861 unit 1+ 95 00 12+ 88 50 25+ 84 50 378 a508-2877 unit 1+ 132 00 12+ 123 00 25+ 118 00 278 188-2443 unit 1+ 140 00 12+ 130 00 25+ 124 50 278 508-2883 unit 1+ 121 00 12+ 112 50 25+ 108 00 378 188-2471 unit 1+ 168 00 12+ 156 00 25+ 149 50 378 508-2906 unit 1+ 140 50 12+ 131 00 25+ 125 00 558 508-2928 unit 1+ 265 00 12+ 245 00 25+ 235 00 188 188-2386 unit 1+ 85 00 12+ 79 00 25+ 75 50 278 188-2415 unit 1+ 109 50 12+ 102 00 25+ 97 50 378 188-2487 unit 1+ 170 00 12+ 158 00 25+ 151 50 558 a508-2849 unit 1+ 291 00 12+ 271 00 25+ 259 00 Description Chassis Plate for Nom. 188-2493 unit 1+ 6 95 12+ 6 55 25+ 6 25 H190xW190 Chassis Plate for Nom. 188-2544 unit 1+ 11 10 12+ 10 50 25+ 10 00 H380xW190 Chassis Plate for Nom. 188-2572 unit 1+ 11 70 12+ 11 10 25+ 10 60 H380xW280 Chassis Plate for Nom. a508-3410 unit 1+ 49 20 12+ 47 70 25+ 46 30 H380xW560 MNX-PCM Series - IP66/67 All have a light grey body colour (RAL 7035) and are impact resistant and self extinguishing. 50mm deep bases with a variety of lid depths PUR/TPE rubber gasket resistant to oil, water and acid Lids secured with captive polyamide screws Fitted with knockouts Flame resistance rating: UL94-V5 Temature range: -40 to +80 C ( -40 to +120 C short term) Lid Colour 75 130 75 Grey 498-5006 100 130 100 Grey 498-4946 125 130 125 Grey 498-4968 75 130 75 Grey 498-5090 100 130 100 Grey 498-5028 125 130 125 Grey 498-5040 130 180 130 Grey 498-14 130 180 130 Grey 498-5113 125 180 125 Grey 498-5135 100 180 100 Grey 498-36 125 180 125 Grey 498-58 180 255 180 Grey 498-5400 75 130 75 Smoked Grey Transparent 498-5012 100 130 100 Smoked Grey Transparent 498-49 125 130 125 Smoked Grey Transparent 498-4974 75 130 75 Smoked Grey Transparent 498-5107 1194 IP66 - TK Range OM = Order Multiple Indicates more pricing available online a New product to range ON-LINE Lid Colour 100 130 100 Smoked Grey Transparent 498-5034 125 130 125 Smoked Grey Transparent 498-5056 75 180 75 Smoked Grey Transparent 498-20 100 180 100 Smoked Grey Transparent 498-5129 125 180 125 Smoked Grey Transparent 498-5157 150 180 150 Smoked Grey Transparent 498-5179 100 180 100 Smoked Grey Transparent 498-42 100 250 100 Grey 498-5337 125 180 125 Smoked Grey Transparent 498-64 150 180 150 Smoked Grey Transparent 498-86 75 255 75 Smoked Grey Transparent 498-5488 100 255 100 Smoked Grey Transparent 498-5343 150 255 150 Smoked Grey Transparent 498-5416 Manu. Part No. PCM 100/75 G 498-5006 unit 1+ 20 50 12+ 19 30 25+ 18 40 PCM 100/100 G 498-4946 unit 1+ 24 90 12+ 23 40 25+ 22 40 PCM 100/125 G 498-4968 unit 1+ 21 70 15+ 20 40 50+ 19 50 PCM 125/75 G 498-5090 unit 1+ 24 10 15+ 22 70 50+ 21 70 PCM 125/100 G 498-5028 unit 1+ 26 40 12+ 24 80 25+ 23 80 PCM 125/125 G 498-5040 unit 1+ 30 40 15+ 28 60 50+ 27 40 PCM 150/75 G 498-14 unit 1+ 29 20 15+ 27 50 50+ 26 30 PCM 150/100 G 498-5113 unit 1+ 29 90 15+ 28 10 50+ 26 90 PCM 150/125 G 498-5135 unit 1+ 30 90 15+ 29 00 50+ 27 80 PCM 175/100 G 498-36 unit 1+ 47 00 12+ 44 20 25+ 42 30 PCM 175/125 G 498-58 unit 1+ 39 40 15+ 37 10 50+ 35 50 PCM 200/150 G 498-5400 unit 1+ 71 00 15+ 66 00 50+ 63 00 PCM 100/75 T 498-5012 unit 1+ 24 40 15+ 23 00 50+ 22 00 PCM 100/100 T 498-49 unit 1+ 21 30 15+ 20 00 50+ 19 20 PCM 100/125 T 498-4974 unit 1+ 23 00 15+ 21 60 50+ 20 70 PCM 125/75 T 498-5107 unit 1+ 23 40 12+ 22 00 25+ 21 10 PCM 125/100 T 498-5034 unit 1+ 25 30 12+ 23 80 25+ 22 80 PCM 125/125 T 498-5056 unit 1+ 31 40 15+ 29 50 50+ 28 30 PCM 150/75 T 498-20 unit 1+ 32 10 15+ 30 20 50+ 28 90 PCM 150/100 T 498-5129 unit 1+ 30 20 15+ 28 40 50+ 27 20 PCM 150/125 T 498-5157 unit 1+ 31 10 12+ 29 30 25+ 28 00 PCM 150/150 T 498-5179 unit 1+ 32 90 15+ 30 90 50+ 29 60 PCM 175/100 T 498-42 unit 1+ 38 30 12+ 35 90 25+ 34 40 SPCM182510G 498-5337 unit 1+ 77 00 12+ 72 50 25+ 69 00 PCM 175/125 T 498-64 unit 1+ 39 70 15+ 37 30 50+ 35 70 PCM 175/150 T 498-86 unit 1+ 60 50 12+ 57 00 25+ 54 50 PCM 200/75 T 498-5488 unit 1+ 61 00 12+ 57 00 25+ 54 50 PCM 200/100 T 498-5343 unit 1+ 65 50 12+ 61 00 25+ 58 50 PCM 200/150 T 498-5416 unit 1+ 72 50 15+ 67 50 50+ 64 50 These glass-fibre reinforced polycarbonate enclosures have light grey bases (RAL 7035), are IP66 rated and are resistant to most acids. Designed to house a wide range of electrical, electronic and pneumatic equipment Impact and flame resistant Flammability rating: VDE 0471, UL94, 960 C / V2 Oating temature range -35 +80 C Available with smooth walls or pre-pressed metric knockouts Wall mounting using through holes below lid fixing screws. Surface mounting using knockouts in bottom of base (sealing plugs provided) Integrated polyurethane cover gasket Lids either light grey RAL7035 or blue transparent (not suitable for displaying OLED s - organic light emitting diodes, inside the case) Chassis Plates Laminated chassis plates (2.6mm thick) supplied with fixing screws are available separately Hinge Set Hinge set is supplied with drilling template, fixing screws and instructions available separately Hinge set can only be used for enclosures up to L180 x W94 mm in this range Knockouts For Mounting-Cables No Manu. Part No. Lid Lid Colour 12048301 94 94 57 15 Light Grey 832-576 120-404 110 110 66 15 Light Grey 832-582 120-405 130 130 75 15 Light Grey 832-598 120-406 180 110 90 18 Light Grey 832-605 12048701 182 180 90 18 Light Grey 832-611 12048801 254 180 90 18 Light Grey 832-627 120-908 254 180 111 39 Light Grey 832-633 130-006 180 110 90 18 Transparent Blue 832-649 130-008 254 180 90 18 Transparent Blue 832-661 130-508 254 180 111 39 Transparent Blue 832-677 Manu. Part No. 12048301 832-576 unit 1+ 17 70 12+ 16 70 25+ 15 90 120-404 832-582 unit 1+ 16 00 12+ 15 00 25+ 14 30 120-405 832-598 unit 1+ 26 40 12+ 24 90 25+ 23 70 120-406 832-605 unit 1+ 41 50 12+ 39 10 25+ 37 40 12048701 832-611 unit 1+ 45 10 12+ 42 40 25+ 40 60 12048801 832-627 unit 1+ 63 00 12+ 59 00 25+ 56 50

ORDERLINE 65 6865 3433 Manu. Part No. 120-908 832-633 unit 1+ 80 00 12+ 75 50 25+ 72 00 130-006 832-649 unit 1+ 41 20 12+ 38 80 25+ 37 10 130-008 832-661 unit 1+ 45 00 12+ 42 30 25+ 40 50 130-508 832-677 unit 1+ 68 00 12+ 64 00 25+ 61 50 Description Chassis Plate+spacers for 223-310 unit 1+ 4 93 15+ 4 62 50+ 4 42 110x110mm Chassis Plate for 130x130mm 223-326 unit 1+ 7 45 15+ 6 90 50+ 6 65 Chassis Plate for 180x110mm 223-332 unit 1+ 8 05 15+ 7 45 50+ 7 20 Chassis Plate for 182x180mm 223-348 unit 1+ 8 40 15+ 7 85 50+ 7 55 Chassis Plate for 254x180mm 223-354 unit 1+ 12 30 15+ 11 60 50+ 11 20 Hinge Set 220-507 unit 1+ 7 80 12+ 7 25 25+ 7 00 Industrial - UV Stabilised All enclosures are light grey similar to (RAL 7035) and have an IP rating of IP65. Halogen free polycarbonate enclosures for use industrial distribution or control and display Tongue and groove lids with neoprene gasket Temature resistance; -40 C +125 C Flammability rating; UL94-V2 Mounting bosses in lower part for mounting plates, boards and terminals Captive lid screws Lid Colour 82 80 55 Clear 581-199 120 80 55 Clear 581-206 120 80 85 Clear 581-212 160 80 55 Clear 581-228 160 80 85 Clear 138-161 160 120 90 Clear 581-234 200 120 75 Clear 581-240 240 160 90 Clear 581-256 50 35 Light Grey 222-137 65 50 35 Light Grey 138-105 82 80 55 Light Grey 580-354 82 80 85 Light Grey 138-111 120 80 55 Light Grey 580-360 120 80 85 Light Grey 222-143 160 80 55 Light Grey 580-398 160 80 85 Light Grey 222-159 122 120 55 Clear 138-149 122 120 55 Light Grey 580-376 122 120 85 Clear 138-155 122 120 90 Light Grey 580-382 122 120 105 Light Grey 138-127 160 120 90 Light Grey 580-405 160 120 140 Light Grey 138-133 200 120 75 Light Grey 580-411 240 120 100 Clear 138-183 240 120 100 Light Grey 222-165 200 150 75 Clear 138-177 200 150 75 Light Grey 580-427 240 160 90 Light Grey 580-433 340 120 150 Light Grey 458-4726 240 160 120 Clear 138-199 240 160 120 Light Grey 222-171 360 200 150 Light Grey 580-455 300 230 85 Clear 138-206 300 230 85 Light Grey 580-449 300 230 110 Light Grey 222-187 Manu. Part No. 330808060 581-199 unit 1+ 27 10 12+ 25 20 25+ 24 20 02215100 581-206 unit 1+ 30 90 12+ 28 80 25+ 27 60 330812090 581-212 unit 1+ 35 70 12+ 33 30 25+ 31 90 330816060 581-228 unit 1+ 35 10 12+ 32 70 25+ 31 30 02231100 138-161 unit 1+ 39 10 12+ 36 40 25+ 34 90 02238100 581-234 unit 1+ 53 00 12+ 49 50 25+ 47 30 02221100 581-240 unit 1+ 57 50 12+ 53 50 25+ 51 00 331624090 581-256 unit 1+ 67 00 12+ 62 50 25+ 60 00 30505040 222-137 unit 1+ 16 20 12+ 15 10 25+ 14 50 30507040 138-105 unit 1+ 23 50 12+ 21 90 25+ 21 00 02210000 580-354 unit 1+ 33 60 12+ 31 30 25+ 30 00 02225000 138-111 unit 1+ 39 10 12+ 36 40 25+ 34 80 30812060 580-360 unit 1+ 38 30 12+ 35 70 25+ 34 10 30812090 222-143 unit 1+ 44 20 12+ 41 10 25+ 39 40 02220000 580-398 unit 1+ 35 10 12+ 32 70 25+ 31 30 30816090 222-159 unit 1+ 46 00 12+ 42 80 25+ 41 00 331212060 138-149 unit 1+ 40 00 12+ 37 20 25+ 35 60 02217000 580-376 unit 1+ 42 10 12+ 39 20 25+ 37 50 02227100 138-155 unit 1+ 42 30 12+ 39 40 25+ 37 70 31212090 580-382 unit 1+ 49 80 12+ 46 40 25+ 44 40 31212110 138-127 unit 1+ 50 12+ 49 10 25+ 47 00 02238000 580-405 unit 1+ 66 00 12+ 61 50 25+ 59 00 31216140 138-133 unit 1+ 76 00 12+ 71 50 25+ 68 50 02221000 580-411 unit 1+ 67 50 12+ 63 00 25+ 60 00 Manu. Part No. 02242100 138-183 unit 1+ 63 00 12+ 58 50 25+ 56 00 31224100 222-165 unit 1+ 74 00 12+ 69 00 25+ 66 00 3310080 138-177 unit 1+ 61 00 12+ 57 00 25+ 54 50 02223000 580-427 unit 1+ 64 50 12+ 60 00 25+ 57 50 02240200 580-433 unit 1+ 67 00 12+ 62 50 25+ 60 00 02245000 458-4726 unit 1+ 126 50 12+ 120 50 25+ 115 50 02243100 138-199 unit 1+ 103 50 12+ 96 50 25+ 92 00 31624120 222-171 unit 1+ 109 00 12+ 101 50 25+ 97 00 02255000 580-455 unit 1+ 205 00 12+ 190 50 25+ 182 50 02253100 138-206 unit 1+ 115 00 12+ 107 00 25+ 102 00 02253000 580-449 unit 1+ 135 00 12+ 125 50 25+ 120 00 02254000 222-187 unit 1+ 157 00 12+ 146 00 25+ 140 00 Recyclable - Euromas II Range All enclosures are light grey similar to (RAL 7035) and have an IP rating of IP65. Recyclable due to high quality plastics without any metal inserts Quick-release turnlock fastening High impact resistance Temature range; +135 C Flammability rating; UL94-V2/1.6mm Manu. Part No. 62210000 364-7955 unit 1+ 17 90 15+ 17 00 50+ 16 20 62208000 266-3530 unit 1+ 19 20 15+ 18 10 50+ 17 30 32212000 266-3546 unit 1+ 27 00 15+ 25 40 50+ 24 40 62215000 364-7961 unit 1+ 20 30 15+ 19 30 50+ 18 50 62227000 a364-8015 unit 1+ 35 90 15+ 34 10 50+ 32 70 62220000 266-35 unit 1+ 26 60 15+ 25 10 50+ 24 00 62231000 364-8021 unit 1+ 30 60 15+ 29 10 50+ 27 90 62238000 364-8037 unit 1+ 42 20 15+ 39 70 50+ 38 00 62237000 266-3568 unit 1+ 43 80 15+ 41 20 50+ 39 40 62223000 364-7999 unit 1+ 40 50 15+ 38 60 50+ 36 90 62239000 364-8043 unit 1+ 44 60 15+ 42 40 50+ 40 60 62240000 364-8059 unit 1+ 47 20 15+ 44 90 50+ 43 00 62241000 266-3574 unit 1+ 64 50 15+ 60 50 50+ 58 00 Description Wall Brackets 266-3647 bag of 4 1+ 8 40 15+ 7 95 50+ 7 60 EK Series All enclosures are light grey (RAL 7035), with an IP67 rating and a flammability rating of UL94-V2. Temature range of the enclosure material is -40 C to +120 C, (+80 C for continuous use). Chassis plates included Impact resistant, self extinguishing and resistant to most acids and alkalis Optional gland plates and fasteners, which fit pre-pressed openings, and extension frames which increase enclosure height by 50mm, are available separately Lid Colour (RAL) Gland Plate Openings 190 190 130 Clear 4 x size 1 506-053 190 190 180 Clear 4 x size 1 580-578 280 190 130 Clear 2 x size 1, 2 x size 2 506-069 280 190 180 Clear 2 x size 1, 2 x size 2 580-584 280 280 130 Clear 4 x size 2 506-075 280 280 180 Clear 4 x size 2 580-590 380 190 130 Clear 2 x size 1, 2 x size 2 111-790 380 190 180 Clear 2 x size 1, 2 x size 2 111-807 380 280 130 Clear 4 x size 2 506-081 380 280 180 Clear 4 x size 2 580-607 560 380 180 Clear 6 x size 2 580-562 190 190 130 Light Grey (RAL 7035) 4 x size 1 581-341 190 190 180 Light Grey (RAL 7035) 4 x size 1 581-385 280 190 130 Light Grey (RAL 7035) 2 x size 1, 2 x size 2 581-357 280 190 180 Light Grey (RAL 7035) 2 x size 1, 2 x size 2 581-391 280 280 130 Light Grey (RAL 7035) 4 x size 2 581-363 380 190 130 Light Grey (RAL 7035) 2 x size 1, 2 x size 2 111-829 380 190 180 Light Grey (RAL 7035) 2 x size 1, 2 x size 2 111-835 380 280 130 Light Grey (RAL 7035) 4 x size 2 581-379 380 280 180 Light Grey (RAL 7035) 4 x size 2 581-414 560 380 180 Light Grey (RAL 7035) 6 x size 2 581-420 760 560 250 Light Grey (RAL 7035) 8 x size 2 111-857 Manu. Part No. HA130T 506-053 unit 1+ 58 00 12+ 55 50 25+ 53 00 HA180T 580-578 unit 1+ 86 50 12+ 82 00 25+ 79 00 JB130T 506-069 unit 1+ 73 50 12+ 70 00 25+ 67 00 JB180T 580-584 unit 1+ 86 50 12+ 82 00 25+ 78 50 OE130T 506-075 unit 1+ 98 50 12+ 93 50 25+ 90 00 EKOE 180 T + EKOVT 580-590 unit 1+ 114 00 12+ 108 50 25+ 103 50 MB130T 111-790 unit 1+ 96 00 12+ 91 50 25+ 87 50 New products available online every week 1195

ON-LINE Manu. Part No. MB180T 111-807 unit 1+ 106 50 12+ 101 50 25+ 97 00 PE130T 506-081 unit 1+ 124 50 12+ 118 50 25+ 113 50 PE180T 580-607 unit 1+ 142 00 12+ 135 00 25+ 129 00 EKUH 180 T + EKUVT 580-562 unit 1+ 270 00 12+ 255 00 25+ 245 00 EKHA 130 G + EKHVT 581-341 unit 1+ 58 00 12+ 55 50 25+ 53 00 EKHA 180 G + EKHVT 581-385 unit 1+ 73 50 12+ 70 00 25+ 67 00 EKJB 130 G + EKJVT 581-357 unit 1+ 91 00 12+ 86 50 25+ 83 00 JB180G 581-391 unit 1+ 86 50 12+ 82 00 25+ 78 50 OE130G 581-363 unit 1+ 98 50 12+ 93 50 25+ 90 00 EKMB 130 G + EKMVT 111-829 unit 1+ 96 00 12+ 91 50 25+ 87 50 MB180G 111-835 unit 1+ 106 50 12+ 101 50 25+ 97 00 EKPE 130 G + EKPVT 581-379 unit 1+ 146 50 12+ 139 00 25+ 133 50 PE180G 581-414 unit 1+ 142 00 12+ 135 00 25+ 129 00 UH180G 581-420 unit 1+ 270 00 12+ 255 00 25+ 245 00 EKWH 250 G + EKUVT (X2) 111-857 unit 1+ 570 00 12+ 540 00 25+ 0 00 Description Gland Plate Size 1 (140.5 x 49) 506-097 unit 1+ 15 40 12+ 14 60 25+ 14 00 Piccolo Series All enclosures are light grey (RAL 7035), with an IP67 rating and a flammability rating of UL94-V2. Temature range of the enclosure material is -40 C to +120 C, (+80 C for continuous use). Designed for push-buttons, junction blocks, pilot lamps, etc Shock resistant Base with screws to attach the mounting plate or DIN rail inside the box Lid with PUR gasket and polyamide lid screws dimension includes lid thickness Note: * Depending on orientation of box Manu. Part No. Lid Lid Colour (RAL) PC C 65 T 140 80 65 20 Clear 119-5553 PC D 65 T 170 80 65 20 Clear 188-2263 PC H 95 T 170 140 95 20 Clear 119-5604 PC M 95 T 230 140 95 20 Clear 188-2285 PC B 65 G 110 80 65 20 Light Grey (RAL 7035) 119-5503 PC D 85 G 170 80 85 40 Light Grey (RAL 7035) 119-5569 PC H 95 G 170 140 95 20 Light Grey (RAL 7035) 119-5597 PC M 95 G 230 140 95 20 Light Grey (RAL 7035) 188-2279 Manu. Part No. DIN Size PC C 65 T 110 a119-5553 unit 1+ 42 60 15+ 39 70 50+ 38 00 PC D 65 T 140 a188-2263 unit 1+ 38 90 15+ 36 60 50+ 35 00 PC H 95 T 140; 110* 119-5604 unit 1+ 61 00 15+ 57 00 50+ 55 00 PC M 95 T 110 188-2285 unit 1+ 70 00 15+ 66 00 50+ 63 00 PC B 65 G 80 119-5503 unit 1+ 33 60 15+ 31 30 50+ 30 00 PC D 85 G 140 119-5569 unit 1+ 45 50 15+ 42 30 50+ 40 50 PC H 95 G 140; 110* 119-5597 unit 1+ 71 50 15+ 67 50 50+ 64 50 PC M 95 G 110 188-2279 unit 1+ 74 00 15+ 69 50 50+ 66 50 Description Chassis Plate for 170x80mm 188-2320 unit 1+ 6 10 15+ 5 80 50+ 5 50 Chassis Plate for 170x140mm 188-2342 unit 1+ 11 10 15+ 10 50 50+ 10 10 Polystyrene Enclosures IP66 - TK Range with smooth sides These enclosures are designed to house a wide range of electrical, electronic and pneumatic equipment Light grey RAL7035 bases with light grey polystyrene lids or clear/transparent (with slight blue tinge) polycarbonate lids Resistant to most acids and alkalis, impact and flame resistant (flammability rating of VDE0471, UL94, 650 C / HB Oating temature range -25 +40 C Wall mounting using through holes below lid fixing screws. Surface mounting using knockouts in bottom of base (sealing plugs provided) Integrated polyurethane cover gasket Chassis Plates Laminated chassis plates available separately, 2.6mm in thickness and supplied with fixing screws Hinge Sets 1196 OM = Order Multiple Indicates more pricing available online a New product to range Hinge set supplied with drilling template, fixing screws and instructions Lid Lid Colour (RAL) Knockouts For Mounting- Cables 65 65 57 15 Grey (RAL 7035) No 223-174 94 65 57 15 Grey (RAL 7035) No 223-180 94 94 57 15 Grey (RAL 7035) No 220-412 94 94 81 39 Grey (RAL 7035) No 223-196 110 110 66 15 Grey (RAL 7035) No 220-428 110 110 90 39 Grey (RAL 7035) No 223-203 130 94 57 15 Grey (RAL 7035) No 832-481 130 130 75 15 Grey (RAL 7035) No 220-434 130 130 99 39 Grey (RAL 7035) No 223-219 180 94 57 15 Grey (RAL 7035) Yes 381-0686 180 110 90 18 Grey (RAL 7035) No 220-440 180 110 90 18 Grey (RAL 7035) Yes 381-0692 180 110 111 39 Grey (RAL 7035) No 223-225 182 180 90 18 Grey (RAL 7035) No 220-456 182 180 90 18 Grey (RAL 7035) Yes 381-5619 182 180 111 39 Grey (RAL 7035) No 223-231 182 180 165 93 Grey (RAL 7035) No 832-497 254 180 90 18 Grey (RAL 7035) No 220-462 254 180 111 39 Grey (RAL 7035) No 223-247 254 180 165 93 Grey (RAL 7035) No 832-504 360 254 111 39 Grey (RAL 7035) No 832-510 94 94 57 15 Transparent Blue No 223-253 110 110 66 15 Transparent Blue No 223-269 130 130 75 15 Clear No 223-275 180 110 90 18 Clear No 220-478 180 110 111 39 Transparent Blue No 832-6 182 180 90 19 Clear No 220-484 182 180 111 39 Clear No 832-532 254 180 90 19 Transparent Blue No 220-490 254 180 111 39 Clear No 832-548 254 180 165 93 Transparent Blue No 832-554 360 254 111 39 Clear No 832-560 Manu. Part No. 11040101 223-174 unit 1+ 10 30 12+ 9 60 25+ 9 20 11040201 223-180 unit 1+ 10 60 12+ 9 95 25+ 9 60 11040301 220-412 unit 1+ 10 70 12+ 10 10 25+ 9 70 11090301 223-196 unit 1+ 17 80 12+ 16 80 25+ 16 10 11040401 220-428 unit 1+ 16 90 12+ 16 00 25+ 15 20 11090401 223-203 unit 1+ 18 20 12+ 17 10 25+ 16 50 11040901 832-481 unit 1+ 19 10 12+ 18 00 25+ 17 30 11040501 220-434 unit 1+ 17 00 12+ 16 00 25+ 15 40 11090501 223-219 unit 1+ 22 80 12+ 21 50 25+ 20 60 10541001 381-0686 unit 1+ 17 50 12+ 16 50 25+ 15 80 11040601 220-440 unit 1+ 21 70 12+ 20 40 25+ 19 60 10540601 381-0692 unit 1+ 24 20 12+ 23 10 25+ 22 00 11090601 223-225 unit 1+ 23 70 12+ 22 40 25+ 21 40 11040701 220-456 unit 1+ 30 80 12+ 29 10 25+ 27 80 10540701 381-5619 unit 1+ 25 40 12+ 24 20 25+ 23 20 11090701 223-231 unit 1+ 29 80 12+ 28 00 25+ 26 90 10940701 832-497 unit 1+ 45 90 12+ 43 20 25+ 41 30 11040801 220-462 unit 1+ 37 10 12+ 35 00 25+ 33 50 11090801 223-247 unit 1+ 39 80 12+ 37 50 25+ 35 80 10940801 832-504 unit 1+ 63 00 12+ 59 50 25+ 57 00 11041201 832-510 unit 1+ 83 50 12+ 77 50 25+ 74 00 11100301 223-253 unit 1+ 18 70 12+ 17 50 25+ 16 60 11100401 223-269 unit 1+ 18 20 12+ 17 20 25+ 16 40 111-005 223-275 unit 1+ 19 40 12+ 18 30 25+ 17 50 11100601 220-478 unit 1+ 31 10 12+ 29 30 25+ 28 10 11150601 832-6 unit 1+ 31 30 12+ 29 10 25+ 27 90 11100701 220-484 unit 1+ 31 40 12+ 29 50 25+ 28 30 11150701 832-532 unit 1+ 37 50 12+ 34 90 25+ 33 40 11100801 220-490 unit 1+ 44 60 12+ 42 00 25+ 40 20 11150801 832-548 unit 1+ 50 12+ 49 10 25+ 47 00 11200801 832-554 unit 1+ 73 50 12+ 69 00 25+ 66 00 11101201 832-560 unit 1+ 115 50 12+ 108 50 25+ 104 00 Description Chassis Plate+spacers for 223-310 unit 1+ 4 93 15+ 4 62 50+ 4 42 110x110mm Chassis Plate for 130x130mm 223-326 unit 1+ 7 45 15+ 6 90 50+ 6 65 Chassis Plate for 180x110mm 223-332 unit 1+ 8 05 15+ 7 45 50+ 7 20 Chassis Plate for 182x180mm 223-348 unit 1+ 8 40 15+ 7 85 50+ 7 55 Chassis Plate for 254x180mm 223-354 unit 1+ 12 30 15+ 11 60 50+ 11 20 Chassis Plate for 360x254mm 832-699 unit 1+ 30 70 15+ 28 90 50+ 27 70 Hinge Set 220-507 unit 1+ 7 80 12+ 7 25 25+ 7 00

ORDERLINE 65 6865 3433 IP66 TK Range with metric knockouts All enclosures have light grey Bases and Lids (RAL 7035), an IP66 rating and are resistant to most acids and alkalis. Laminated chassis plates available separately, 2.6mm in thickness supplied with fixing screws Lid 65 65 57 15 397-4409 94 65 57 15 397-4415 94 94 81 39 397-4421 94 94 57 15 397-4437 110 110 90 39 397-4459 130 130 99 39 397-4465 180 110 111 39 397-4471 182 180 111 39 397-4487 182 180 165 39 397-4588 254 180 111 39 397-4500 254 180 165 93 397-4601 Manu. Part No. 105-401-21 397-4409 unit 1+ 19 80 12+ 18 20 25+ 17 50 105-402-21 397-4415 unit 1+ 16 80 12+ 15 50 25+ 14 80 105-903-21 397-4421 unit 1+ 23 90 12+ 22 00 25+ 21 10 105-403-21 397-4437 unit 1+ 23 30 12+ 21 50 25+ 20 50 105-904-21 397-4459 unit 1+ 38 00 12+ 35 00 25+ 33 50 105-905-21 397-4465 unit 1+ 45 10 12+ 41 50 25+ 39 70 105-906-21 397-4471 unit 1+ 55 50 12+ 51 00 25+ 48 90 105-907-21 397-4487 unit 1+ 54 50 12+ 50 00 25+ 47 90 10440721 397-4588 unit 1+ 93 00 12+ 85 50 25+ 82 00 105-908-21 397-4500 unit 1+ 77 00 12+ 71 00 25+ 67 50 10440821 397-4601 unit 1+ 116 50 12+ 107 00 25+ 102 50 Description Chassis Plate+spacers for 223-310 unit 1+ 4 93 15+ 4 62 50+ 4 42 110x110mm Chassis Plate for 130x130mm 223-326 unit 1+ 7 45 15+ 6 90 50+ 6 65 Chassis Plate for 180x110mm 223-332 unit 1+ 8 05 15+ 7 45 50+ 7 20 Chassis Plate for 182x180mm 223-348 unit 1+ 8 40 15+ 7 85 50+ 7 55 Chassis Plate for 254x180mm 223-354 unit 1+ 12 30 15+ 11 60 50+ 11 20 Chassis Plate for 360x254mm 832-699 unit 1+ 30 70 15+ 28 90 50+ 27 70 Hinge Set 220-507 unit 1+ 7 80 12+ 7 25 25+ 7 00 IP65 Modular Junction Box-AKL Range Based on 300mm wide x 132mm high module Metric knockouts in base Internal base has stand-off pillars to facilitate mounting DIN rails and mounting plates Cable adaptors and sealing plugs included Polyurethane sealing plug 300 mm Knockouts For Cable Glands Yes 132 mm IP Rating IP 65 Grey Glass Reinforced Plastic Enclosures Heavy Duty Hinged Polyester Glass reinforced polyester Impact resistant and self extinguishing Integrated hinges Doors with oil and petrol resistant neoprene sealing gasket open 120 and steel hinge pins allow easy removal Slotted polyester door fastening screws IP Rating IP66 Polyester Cases Temature range 40 C to +80 C Stainless steel screws Designed to house DIN-rail mounted terminal block and various types of sensors Flammability rating UL 94-5V Standards: UL 508, NEMA Type 1, 4, 4X, 12 and 13. IP Rating Light Grey RAL7032 IP66 Grey RAL7001 IP66 Clear Makrolon Front Two-part, modular, glass fibre enclosures Removable chassis plates included Self extinguishing, resistant to ozone, most oils, acids, bases and salts Temature range -50 C to +160 C Note: Makrolon is a regd. Trade mark of Bayer AG Leverkusen. 120 140 100 225-568 unit 1+ 132 50 6+ 124 50 160 180 100 225-574 unit 1+ 183 50 6+ 172 50 200 320 120 225-580 unit 1+ 285 00 6+ 270 00 120 200 100 500-156 unit 1+ 141 00 6+ 132 50 120 260 100 a500-162 unit 1+ 199 00 6+ 187 00 160 260 100 500-178 unit 1+ 230 00 6+ 220 00 200 220 120 500-190 unit 1+ 255 00 6+ 240 00 160 75 55 507-5475 unit 1+ 65 50 12+ 61 00 25+ 58 50 110 75 55 507-5447 unit 1+ 55 50 12+ 51 50 25+ 49 50 80 75 55 507-5431 unit 1+ 108 00 12+ 100 50 25+ 96 00 122 120 90 507-5469 unit 1+ 100 50 12+ 94 50 25+ 90 50 190 75 55 507-5497 unit 1+ 60 00 12+ 55 50 25+ 53 50 160 160 90 507-5481 unit 1+ 137 50 12+ 129 00 25+ 123 50 222 120 90 507-5504 unit 1+ 107 50 12+ 101 00 25+ 97 00 260 160 90 507-5598 unit 1+ 158 50 12+ 149 00 25+ 142 50 360 160 90 507-5548 unit 1+ 200 00 12+ 188 00 25+ 180 00 255 250 120 507-5532 unit 1+ 260 00 12+ 245 00 25+ 235 00 400 250 120 507-5554 unit 1+ 290 00 12+ 275 00 25+ 260 00 600 250 120 507-5582 unit 1+ 470 00 12+ 440 00 25+ 420 00 Heavy Duty Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards Heavy duty with an average wall thickness of 3.3mm Moulded from general purpose ABS plastic Designed to meet IP54 Countersunk lid is secured with 4 x 1 in. (25.4mm) self tapping screws Grey matt textured finish includes 12 mm lid height Grey RAL 7035 Knockouts For Cable Glands No Lid Colour Grey (RAL 7035) IP Rating IP 54 Lid Colour 150 Grey 381-0608 unit 1+ 49 30 12+ 46 90 25+ 44 90 300 Grey 381-0614 unit 1+ 71 00 12+ 67 50 25+ 64 50 450 Grey 381-0642 unit 1+ 109 50 12+ 104 00 25+ 100 00 300 Clear 381-0636 unit 1+ 103 50 12+ 98 50 25+ 94 00 450 Clear 381-0658 unit 1+ 132 50 12+ 126 00 25+ 120 50 56 56 40 381-5120 unit 1+ 7 70 15+ 7 00 50+ 6 75 81 56 40 381-5136 unit 1+ 9 20 15+ 8 40 50+ 8 10 105 66 45 381-5142 unit 1+ 11 20 15+ 10 20 50+ 9 85 131 66 55 381-5158 unit 1+ 13 00 15+ 12 00 50+ 11 40 167 107 65 381-5164 unit 1+ 17 80 15+ 16 30 50+ 15 70 Grey IP Rating IP66 Lid Colour Clear Reinforced Glass Fibre Front Two-part, modular, glass fibre enclosures Removable chassis plates included Self extinguishing, resistant to ozone, most oils, acids, bases and salts Temature range -50 C to +160 C Grey IP Rating IP67 Lid Colour Grey 370 300 175 501-496 unit 1+ 183 00 12+ 172 00 25+ 164 50 185 150 130 507-977 unit 1+ 102 50 12+ 96 00 25+ 92 00 300 300 175 508-324 unit 1+ 154 50 12+ 145 00 25+ 139 00 300 185 175 508-330 unit 1+ 141 00 12+ 131 50 25+ 125 50 300 370 175 501-480 unit 1+ 160 50 12+ 151 00 25+ 144 50 300 300 175 507-999 unit 1+ 154 50 12+ 145 00 25+ 139 00 Many more leading brands from over 2,500 suppliers available online 1197

ON-LINE Moulded Enclosures A range of Compression moulded Glass Reinforced Polyester Enclosures Lightweight and double insulated Impact resistant and self extinguishing Will not absorb water Non-tracking and resistant to temature change Lids with polyurethane seal and slotted head polyamide screws The dimension includes the thickness of the Lid Bakelite chassis plate available separately Sealed Polyester Case High mechanical strength with resistance to contamination from oils, fats, aliphatic and aromatic carbohydrates, bacteria, enzymes etc. Difficult to light, will not give off toxic fumes Temature range of -40 100 C Lid with stainless steel screws Tongue and groove arrangement with neoprene rubber gasket provide sealing Fixing holes outside sealed area Base with moulded threaded inserts for mounting DIN rails along the Case width = (A), = (B), = (C) on Line Diagram dimension includes Lid thickness 185 300 175 508-009 unit 1+ 121 00 12+ 112 50 25+ 108 00 150 185 130 508-015 unit 1+ 102 50 12+ 96 00 25+ 92 00 Lid Colour Base Material Lid Material 180 135 129 Clear Polyamide Polycarbonate 839-842 270 135 129 Clear Polyamide Polycarbonate 839-858 270 180 141 Clear Polyester Polycarbonate 839-864 270 180 171 Clear Polyester Polycarbonate 839-870 270 270 171 Clear Polyester Polycarbonate 839-886 360 270 171 Clear Polyester Polycarbonate 205-1476 360 270 201 Clear Polyester Polycarbonate 205-1498 540 270 171 Clear Polyester Polycarbonate 205-1511 180 135 129 Grey Polyamide Makrolon 839-892 270 135 129 Grey Polyamide Makrolon 839-909 270 180 141 Grey Polyester Makrolon 839-915 270 180 171 Grey Polyester Polyester 839-921 270 270 171 Grey Polyester Polyester 839-937 360 270 171 Grey Polyester Polyester 205-17 360 270 201 Grey Polyester Makrolon 205-1533 540 270 171 Grey Polyester Polyester 205-1561 Manu. Part No. E1813L 839-842 unit 1+ 53 00 12+ 51 40 25+ 50 40 E2713L 839-858 unit 1+ 61 00 12+ 59 20 25+ 58 00 E2718L 839-864 unit 1+ 79 00 12+ 76 60 25+ 75 10 E2718 839-870 unit 1+ 84 00 12+ 81 50 25+ 79 80 E2727 839-886 unit 1+ 106 50 12+ 103 30 25+ 101 20 E2736 205-1476 unit 1+ 111 50 12+ 108 20 25+ 105 90 E2736H 205-1498 unit 1+ 125 50 12+ 121 70 25+ 119 20 E5427 205-1511 unit 1+ 1 50 12+ 147 90 25+ 144 90 E1813LO 839-892 unit 1+ 56 00 12+ 54 30 25+ 53 20 E2713LO 839-909 unit 1+ 61 00 12+ 59 20 25+ 58 00 E2718LO 839-915 unit 1+ 79 00 12+ 76 60 25+ 75 10 E2718UP 839-921 unit 1+ 82 50 12+ 80 00 25+ 78 40 E2727UP 839-937 unit 1+ 104 00 12+ 100 90 25+ 98 80 E2736UP 205-17 unit 1+ 101 00 12+ 98 00 25+ 96 00 E2736HO 205-1533 unit 1+ 125 50 12+ 121 70 25+ 119 20 E5427UP 205-1561 unit 1+ 139 00 12+ 134 80 25+ 132 10 Description Chassis Plate for 180x135mm 839-943 unit 1+ 2 05 15+ 1 99 50+ 1 95 Chassis Plate for 270x135mm 839-959 unit 1+ 6 60 15+ 6 40 50+ 6 27 Chassis Plate for 270x180mm 839-965 unit 1+ 3 57 15+ 3 46 50+ 3 39 Chassis Plate for 270x270mm 839-971 unit 1+ 12 00 15+ 11 60 50+ 11 40 Chassis Plate for 360x270mm 205-1577 unit 1+ 16 70 15+ 16 20 50+ 15 90 Chassis Plate for 540x270mm 205-1599 unit 1+ 23 00 15+ 22 30 50+ 21 90 Grey RAL7000 IP Rating IP66 Lid Colour (RAL) Grey; RAL 7000 Dimension A Dimension B Dimension C Manu. Part No. 80 75 75 02080808 229-1337 110 75 75 02081108 229-1343 190 75 75 02081908 229-1365 255 250 160 022616 229-1393 Manu. Part No. 02080808 229-1337 unit 1+ 56 50 12+ 53 00 25+ 51 00 02081108 229-1343 unit 1+ 68 50 12+ 64 50 25+ 61 50 Manu. Part No. 02081908 a229-1365 unit 1+ 78 00 12+ 73 00 25+ 70 00 022616 229-1393 unit 1+ 355 00 12+ 330 00 25+ 320 00 ABS Enclosures All have a flammability rating of UL94-HB. Reverse Mountable Two-part cases designed to be reverse mounted if required Cover fixings outside sealed area with clip on cover trims Captive rustproof screws Internal pillars for mounting PCBs, DIN rails etc 1mm recessed area in cover allows the mounting of aluminium front panels or membrane keypads 60 mm (RAL) Light Grey RAL7035 IP Rating IP66 Euronord II Series Polyurethane gasket and closing screws for high level of protection Fixing holes for mounting internal equipment Applications: junction boxes, electrical, electronic and industrial equipment IP Rating (RAL) Industrial For use as industrial distributor or control and display enclosures Temature resistance; -40 C +75 C Mounting bosses for plates, boards and terminals Captive lid screws IP Rating (RAL) IP66/67 Light Grey RAL7035 IP65 Light Grey RAL7035 120 80 802-503 unit 1+ 35 00 12+ 32 90 25+ 31 60 160 160 802-5 unit 1+ 60 00 12+ 56 50 25+ 54 00 200 120 119-4954 unit 1+ 57 50 12+ 54 00 25+ 51 50 240 160 119-4998 unit 1+ 69 50 12+ 65 00 25+ 62 50 65 50 45 219-0010 unit 1+ 20 50 12+ 19 30 25+ 18 40 160 80 65 218-9981 unit 1+ 41 60 12+ 39 10 25+ 37 50 160 120 90 218-9953 unit 1+ 48 00 12+ 45 20 25+ 43 30 250 160 125 218-9919 unit 1+ 85 00 12+ 80 00 25+ 76 50 50 35 505-993 unit 1+ 9 90 12+ 9 21 25+ 8 81 65 50 35 222-193 unit 1+ 19 70 12+ 18 40 25+ 17 60 82 80 55 507-955 unit 1+ 23 00 12+ 21 40 25+ 20 50 82 80 85 222-200 unit 1+ 28 50 12+ 26 60 25+ 25 40 98 64 36 364-8396 unit 1+ 20 10 12+ 18 90 25+ 18 10 120 80 55 507-949 unit 1+ 24 90 12+ 23 20 25+ 22 20 120 80 60 364-8419 unit 1+ 34 50 12+ 32 10 25+ 30 70 120 80 85 222-216 unit 1+ 32 70 12+ 30 40 25+ 29 20 120 80 90 364-9080 unit 1+ 28 50 12+ 26 80 25+ 25 70 122 120 55 506-003 unit 1+ 28 20 12+ 26 30 25+ 25 20 122 120 90 222-222 unit 1+ 35 40 12+ 32 90 25+ 31 50 122 120 105 222-238 unit 1+ 35 60 12+ 33 20 25+ 31 70 160 80 55 507-933 unit 1+ 25 20 12+ 23 40 25+ 22 40 160 80 60 364-8425 unit 1+ 27 90 12+ 26 20 25+ 25 10 160 80 85 506-716 unit 1+ 23 50 12+ 21 90 25+ 20 90 160 80 90 364-8447 unit 1+ 34 50 12+ 32 40 25+ 31 00 160 120 90 506-722 unit 1+ 40 20 12+ 37 80 25+ 36 20 160 120 140 364-8497 unit 1+ 57 50 12+ 54 00 25+ 00 200 120 75 222-244 unit 1+ 37 10 12+ 34 60 25+ 33 10 200 120 90 364-8453 unit 1+ 48 00 12+ 45 20 25+ 43 30 200 150 75 506-738 unit 1+ 48 60 12+ 45 20 25+ 43 30 240 120 100 501-143 unit 1+ 49 90 12+ 46 40 25+ 44 50 240 160 90 501-159 unit 1+ 56 50 12+ 50 25+ 50 50 240 160 120 506-744 unit 1+ 61 00 12+ 57 00 25+ 54 50 250 160 90 364-9096 unit 1+ 61 50 12+ 58 00 25+ 55 50 250 160 120 364-8469 unit 1+ 72 00 12+ 68 00 25+ 65 00 250 160 150 364-9103 unit 1+ 95 00 12+ 89 50 25+ 85 50 300 230 85 222-250 unit 1+ 112 00 12+ 104 00 25+ 100 00 300 230 110 222-266 unit 1+ 136 00 12+ 126 50 25+ 121 00 340 150 100 364-8475 unit 1+ 104 50 12+ 98 50 25+ 94 00 340 150 120 364-8481 unit 1+ 110 50 12+ 104 00 25+ 99 50 360 160 100 364-8504 unit 1+ 137 00 12+ 129 00 25+ 123 50 1198 OM = Order Multiple Indicates more pricing available online a New product to range

ORDERLINE 65 6865 3433 360 200 150 222-272 unit 1+ 137 00 12+ 127 50 25+ 122 00 400 360 150 364-9119 unit 1+ 255 00 12+ 235 00 25+ 225 00 Recyclable Industrial Recyclable due to high quality plastics without any metal inserts Quick-release turnlock fastening Temature range +74 C IP Rating IP65 (RAL) Light Grey RAL7035 Flame Resistance Rating UL 94 HB IP65 - Wall Mount - RegloCard-Plus Shock-resistant Hinged transparent door Slots for vertical PCB mounting and posts for horizontal mounting Recessed front to accept membrane keypad Flame Resistance; UL 94 HB/1.6 Note: The aluminium front panels are designed to mount inside the plastic enclosures and do not replace the plastic hinged front. IP Rating IP54 Heavy Duty - Flame Retardant Moulded in rugged flame retardant ABS plastic to UL94V-0 3.3mm wall thickness M3 machine screws threaded into integral brass bushings Black or grey matt textured finish Designed for mounting PCB s Raised Lid Up section in 1.8mm thick transparent styrene acrylic nitrile connected via M3 screws to a white 2.7mm thick ABS lower section Lower section with 2mm slots on 5mm pitch for mounting PCBs (lengthwise or width wise) and supports to mount PCBs horizontally Temature range -20 C +85 C IP Rating IP65 Grey RAL7035 Manu. Part No. Type 1594ABK HD Black 56 56 40 8-6928 1594AGY HD Grey 56 56 40 8-6940 1594BBK HD Black 81 56 40 8-6956 1594BGY HD Grey 81 56 40 8-6962 1594CBK HD Black 106 66 45 8-6978 1594CGY HD Grey 106 66 45 8-6984 1594DBK HD Black 131 66 55 8-6990 1594DGY HD Grey 131 66 55 8-7016 1594EBK HD Black 167 107 65 8-7022 1594EGY HD Grey 167 107 65 8-7038 IP54 White 161 166 93 186-6980 unit 1+ 62 00 15+ 58 50 50+ 56 00 161 166 121 186-6996 unit 1+ 68 00 15+ 64 00 50+ 61 00 185 213 104.5 186-7012 unit 1+ 72 50 15+ 68 50 50+ 65 50 186 131 103 186-6974 unit 1+ 63 00 15+ 59 00 50+ 56 50 Description Aluminium Front Panel for 186-7034 unit 1+ 9 45 15+ 8 90 50+ 8 55 186x131mm Aluminium Front Panel for 186-7040 unit 1+ 8 60 15+ 8 05 50+ 7 75 161x166mm Aluminium Front Panel for 186-7056 unit 1+ 10 10 15+ 9 55 50+ 9 15 185x213mm Cylinder Lock 266-3057 unit 1+ 22 60 15+ 21 30 50+ 20 40 Manu. Part No. 1594ABK 8-6928 unit 1+ 10 00 15+ 9 50 50+ 9 30 1594AGY 8-6940 unit 1+ 8 50 15+ 8 05 50+ 7 90 1594BBK 8-6956 unit 1+ 9 10 15+ 8 70 50+ 8 40 1594BGY 8-6962 unit 1+ 9 10 15+ 8 70 50+ 8 40 1594CBK 8-6978 unit 1+ 10 40 15+ 9 90 50+ 9 60 1594CGY 8-6984 unit 1+ 10 40 15+ 9 90 50+ 9 60 1594DBK 8-6990 unit 1+ 11 60 15+ 11 00 50+ 10 70 1594DGY 8-7016 unit 1+ 11 60 15+ 11 00 50+ 10 70 1594EBK 8-7022 unit 1+ 16 90 15+ 16 10 50+ 15 80 1594EGY 8-7038 unit 1+ 16 90 15+ 16 10 50+ 15 80 150 80 76 507-674 unit 1+ 10 30 15+ 9 50 50+ 9 10 190 110 90 507-668 unit 1+ 18 80 15+ 17 40 50+ 16 60 StarCASE IP66 Enclosure Material: ABS Ideal for housing modern electronics and electrical systems Suitable for wall mounting or portable applications Hinged flush-fitting trims hide the case fixing screws Wall mounting screw shafts also hidden under the trims Two lid retaining straps included Recessed area in the lid for mounting membrane keypads IP Rating IP66 (RAL) Light Grey RAL7035 Flame Resistance Rating UL 94 V-0 Heavy Duty Chassis - Aluminium Heavy Duty Metal Case Chassis and Covers Spot welded heavy duty construction chassis in natural coloured aluminium. Optional covers are available prepunched with 4 holes. Fasteners are not provided, #6-32 crosshead screws will be needed. Selection Guide Max. 98 64 38 266-3596 unit 1+ 15 80 15+ 14 90 50+ 14 30 100 100 57 266-3603 unit 1+ 19 80 15+ 18 60 50+ 17 90 160 80 57 266-3619 unit 1+ 22 50 15+ 21 20 50+ 20 30 200 120 92 266-3625 unit 1+ 44 70 15+ 42 00 50+ 40 30 250 160 122 266-3631 unit 1+ 56 50 15+ 53 00 50+ 51 00 Description Wall Brackets 266-3647 bag of 4 1+ 8 40 15+ 7 95 50+ 7 60 120 90 50 509-5126 unit 1+ 37 30 12+ 36 40 25+ 35 50 160 90 50 509-5148 unit 1+ 41 70 12+ 40 60 25+ 39 50 200 110 60 509-5154 unit 1+ 54 00 12+ 50 25+ 51 50 160 130 60 509-5160 unit 1+ 45 90 12+ 44 70 25+ 43 60 Description Manu. Part No. Suitable Cover Enclosure 1x102x51 mm 1444-8 385-9401 1434-8 385-9192 Enclosure 203x102x25 mm 1444-9 385-9423 1434-10 385-9209 Enclosure 203x102x51 mm 1444-10 385-9013 1434-10 385-9209 Enclosure 178x127x51 mm 1444-12 385-9029 1434-12 2508784510 Enclosure 229x127x51 mm 1444-14 385-9035 1434-14 385-9221 Enclosure 254x1x25 mm 1444-15 385-9041 1434-16 385-9237 Enclosure 254x1x51 mm 1444-16 385-9057 1434-16 385-9237 Enclosure 343x127x51 mm 1444-18 385-9063 1434-18 385-9243 Enclosure 305x203x51 mm 1444-22 385-9091 1434-22 385-9265 Enclosure 305x203x76 mm 1444-24 385-9108 1434-22 385-9265 Enclosure 406x203x51 mm 1444-26 385-9114 1434-26 386-7991 Enclosure 406x203x76 mm 1444-28 385-9120 1434-26 386-7991 Enclosure 432x254x87 mm 1444-32 385-9164 1434-30 383-2305 Cover 2508784510 is an Extended Range product available on the RS website Description Manu. Part No. 1x102x51mm 1444-8 385-9401 unit 1+ 12 60 15+ 11 80 25+ 11 30 203x102x25mm 1444-9 385-9423 unit 1+ 14 60 15+ 13 70 25+ 13 00 203x102x51mm 1444-10 385-9013 unit 1+ 13 50 15+ 12 70 25+ 12 10 178x127x51mm 1444-12 385-9029 unit 1+ 13 90 15+ 13 00 25+ 12 40 229x127x51mm 1444-14 385-9035 unit 1+ 16 70 15+ 15 60 25+ 14 80 254x1x25mm 1444-15 385-9041 unit 1+ 14 60 15+ 13 70 25+ 13 00 254x1x51mm 1444-16 385-9057 unit 1+ 18 10 15+ 17 00 25+ 16 20 343x127x51mm 1444-18 385-9063 unit 1+ 19 20 15+ 18 00 25+ 17 10 305x203x51mm 1444-22 385-9091 unit 1+ 31 50 15+ 29 40 25+ 28 10 305x203x76mm 1444-24 385-9108 unit 1+ 35 40 15+ 33 00 25+ 31 50 406x203x51mm 1444-26 385-9114 unit 1+ 31 80 15+ 29 70 25+ 28 20 406x203x76mm 1444-28 385-9120 unit 1+ 37 90 15+ 35 70 25+ 33 60 432x254x87mm 1444-32 385-9164 unit 1+ 43 90 15+ 41 00 25+ 39 60 Visit our website for additional price information and exciting promotions 1199

ON-LINE Description Plastic Instrument Cases All cases are manufactured from ABS. Small Size Cases 2-part cases with moulded bosses for PCB mounting Side slots for chassis rail mounting in both halves Panel thickness; 1.57mm Supplied with: 4 rubber feet. ABS Bone 129 38 134 220-989 154 64 159 220-995 161 35 241 221-005 Desk Type Instrument Cases Tilted Desk Type Instrument Cases 3- part moulded case with aluminium front panel and tilt feet. Centre section has card guides for vertical and horizontal mounting of Eurocards up to a maximum size of 100x160mm (RAL) Aluminium Off White RAL9002, Pebble Grey RAL7032 Eurocard Compatible Cases Cases consisting of top and bottom covers screwed to a chassis assembly with front and rear panels Mounting bosses accommodate various Eurocard sizes Ventilation slots to rear and base panels Supplied with: tilting feet Dimensions Manu. Part No. Flame resistant (UL94-HB) Temature range; -40 C to +80 C 2 anodized aluminium panels supplied: 3 mm thick, screw fitted; 1.2 mm thick, retained by slots in top and bottom mouldings PCB mounting guides for 6U Eurocards 160 mm or 220 mm deep Optional handles available separately Supplied with: non-slip feet and 4 self adhesive mounting clips (a grid pattern in top/bottom mouldings provides accurate positioning) Enclosure Dimensions Eurocard Size 171 x 56 x 145 160 x 100 or 1 2 160 x 100 x 2 231 x 77 x 181 220 x 160 or 160 x 100 x 2 247 x 102 x 220 233 x 160 or 160 x 100 x 2 Cover 1x102 1434-8 385-9192 unit 1+ 6 50 15+ 6 10 25+ 5 80 Cover 203x102 1434-10 385-9209 unit 1+ 6 85 15+ 6 60 25+ 6 35 Cover 229x127 1434-14 385-9221 unit 1+ 6 50 15+ 6 10 25+ 5 80 Cover 254x1 1434-16 385-9237 unit 1+ 9 80 15+ 9 25 25+ 8 75 Cover 343x127 1434-18 385-9243 unit 1+ 10 40 15+ 9 85 25+ 9 35 Cover 305x203 1434-22 385-9265 unit 1+ 15 60 15+ 14 70 25+ 13 90 Cover 406x203 1434-26 386-7991 unit 1+ 13 80 15+ 13 00 25+ 12 30 Cover 432x254 1434-30 383-2305 unit 1+ 14 90 15+ 13 90 25+ 13 30 129 220-989 unit 1+ 16 10 15+ 15 00 50+ 14 30 154 220-995 unit 1+ 20 20 15+ 18 80 50+ 18 00 161 221-005 unit 1+ 34 80 15+ 32 30 50+ 31 00 250 mm ABS 275 mm Light Grey 50 504-732 unit 1+ 98 50 12+ 93 50 25+ 90 00 75 504-748 unit 1+ 126 50 12+ 120 50 25+ 115 50 100 504-754 unit 1+ 143 00 12+ 135 50 25+ 130 00 Description Carry/Tilt Handles 504-798 unit 1+ 25 80 12+ 24 50 25+ 23 50 Description Un-ventilated case 57 118 150 505-987 Un-ventilated case 67 148 190 505-971 Ventilated case 136 173 230 505-965 118 505-987 unit 1+ 61 00 12+ 57 50 25+ 55 00 148 505-971 unit 1+ 70 00 12+ 66 00 25+ 63 00 173 505-965 unit 1+ 135 50 12+ 127 50 25+ 122 00 ABS Black Panel Material Aluminium Panel Colour Natural Brushed Two Tone Cases with Handle 2-part case with a solid tongue and groove joint Base has PCB mounting pillars and a carry/tilt handle 189 mm Panel Material Polystyrene 60 mm Off White 110 mm Panel Colour Pebble Grey Polystyrene IP62 Cases Impact resistant, 2-part Moulded case Flame retardant ABS to UK94-V0 Removable end panels maintain IP62 protection PCB s may be horizontally or vertically mounted ABS Dark Grey Panel Material ABS Panel Colour Light Grey 583-167 unit 1+ 38 00 12+ 36 10 25+ 34 60 ABS Instrument Case - Un-Shielded Desk top electronic instrument enclosure, ideally suited for mounting printed circuit boards Moulded PCB stand-offs, vertical card guides and brass bushings for repetitive assembly/disassembly Positive fit, tongue and groove construction Flame retardant to UL94V-0 Recessed end panels Body Material ABS Black Panel Material Aluminium Panel Colour Natural Brushed Small Module Cases Side slots for PCB location Front panel secured via M3 screws to integral brass bushes Supplied with: 4 self adhesive rubber feet. 90 50 24 219-548 unit 1+ 4 55 15+ 4 09 25+ 3 90 90 50 32 219-469 unit 1+ 5 60 15+ 5 10 25+ 4 88 120 60 30 218-898 unit 1+ 9 00 15+ 8 15 25+ 7 85 120 60 40 219-318 unit 1+ 8 30 15+ 7 45 25+ 7 10 150 80 30 219-324 unit 1+ 10 30 15+ 9 25 25+ 8 85 150 80 45 219-330 unit 1+ 11 30 15+ 10 10 25+ 9 75 190 100 40 219-380 unit 1+ 16 20 15+ 14 50 25+ 13 90 190 100 60 219-396 unit 1+ 20 00 15+ 18 20 25+ 17 40 190 100 80 219-403 unit 1+ 27 40 15+ 24 70 25+ 23 60 Body Material ABS Grey Panel Material Aluminium Panel Colour Natural 157 36 92 119-8906 unit 1+ 13 70 12+ 12 60 25+ 12 00 134 50 133 119-8912 unit 1+ 21 30 12+ 19 60 25+ 18 80 180 1 119-8928 unit 1+ 23 00 12+ 21 10 25+ 20 20 180 64 203 119-8934 unit 1+ 27 80 12+ 25 60 25+ 24 60 160 86 160 119-8940 unit 1+ 24 90 12+ 23 00 25+ 22 00 250 76 160 119-8978 unit 1+ 32 00 12+ 29 40 25+ 28 20 280 76 200 119-8990 unit 1+ 34 30 12+ 31 60 25+ 30 30 179 36 154 343-9394 unit 1+ 17 20 12+ 15 80 25+ 15 10 145 56 171 506-974 unit 1+ 35 00 12+ 32 60 25+ 31 20 181 77 231 506-980 unit 1+ 55 50 12+ 51 50 25+ 49 30 220 102 247 506-996 unit 1+ 82 50 12+ 76 50 25+ 73 50 96 59 161 503-105 unit 1+ 9 35 25+ 8 60 100+ 8 25 71 48 111 508-497 unit 1+ 10 20 25+ 9 35 100+ 8 95 56 35 85 508-504 unit 1+ 6 55 25+ 6 05 100+ 5 80 1200 OM = Order Multiple Indicates more pricing available online

ORDERLINE 65 6865 3433 Two - Tone Cases Two part polystyrene cases Bases with moulded fastening pillars for PCBs Front panels rest on 4 spring posts Body Material ABS Off White; Pebble Grey Panel Material Aluminium Panel Colour Natural Anodised Flame Resistant Plastic Case SS series Close fitting top and bottom covers ensure a degree of dust and water resistance Moulded from flame resistant ABS plastic Top Cover Material ABS Surface finish Up Etching Bottom Cover Material ABS Compact Plastic Case SW Series General purpose One-touch open and close type compact case The up surface has a soft etched finish Flame resistant ABS plastic Cover Material ABS resin Surface finishing Up etching Lower Lid Material ABS resin 120 40 65 583-173 unit 1+ 30 40 12+ 29 00 25+ 27 70 210 70 125 583-189 unit 1+ 68 00 12+ 64 50 25+ 62 00 Comparison table Takachi Electric Industrial Manu part no. W H D Weight (g) SS-90A 50 26 90 50 401-9941 SS-125A 80 32 125 100 401-9957 SS-160A 100 38 160 160 401-9963 SS-90B 50 26 90 50 401-9979 SS-125B 80 32 125 100 401-9985 SS-160B 100 38 160 160 401-9991 Manu. Part No. Colour SS-90A Ivory 401-9941 unit 1+ 4 94 50+ 4 64 SS-125A Ivory 401-9957 unit 1+ 6 15 25+ 5 80 SS-160A Ivory 401-9963 unit 1+ 8 45 25+ 7 95 SS-90B Black 401-9979 unit 1+ 4 22 50+ 3 97 SS-125B Black 401-9985 unit 1+ 6 85 25+ 6 45 SS-160B Black 401-9991 unit 1+ 7 85 25+ 7 35 Takachi Electric Industrial Manu. Part. No. H W D Weight (g) Colour SW-20S 15 15 20 2 Light Grey 500-4697 SW-30S 18 20 30 2 Light Grey 500-4704 SW-40S 20 30 40 10 Light Grey 373-2312 SW-50S 25 35 50 14 Light Grey 500-4726 SW-55S 20 40 55 20 Light Grey 373-2334 SW-65S 25 45 65 21 Light Grey 500-4732 SW-75S 30 50 75 35 Light Grey 373-2362 SW-85S 40 60 85 43 Light Grey 500-4748 SW-100S 35 65 100 55 Light Grey 373-2407 SW-120S 24 60 120 55 Light Grey 373-2435 SW-125S 40 70 125 80 Light Grey 373-2457 SW-130S 25 40 130 43 Light Grey 500-4754 SW-20B 15 15 20 2 Black 500-4760 SW-30B 18 20 30 2 Black 500-4776 SW-40B 20 30 40 10 Black 373-2328 SW-50B 25 35 50 14 Black 500-4782 SW-55B 20 40 55 20 Black 373-2340 SW-65B 25 45 65 21 Black 500-4798 SW-75B 30 50 75 35 Black 373-2378 SW-85B 40 60 85 43 Black 500-4805 SW-95B 18 58 95 35 Black 373-2390 SW-100B 35 65 100 55 Black 373-2429 SW-120B 24 60 120 55 Black 373-2441 SW-125B 40 70 125 80 Black 373-2463 SW-130B 25 40 130 43 Black 500-4811 Manu. Part No. Colour SW-20S Light Grey 500-4697 unit 1+ 1 41 50+ 1 33 SW-30S Light Grey 500-4704 unit 1+ 1 49 50+ 1 40 SW-40S Light Grey 373-2312 unit 1+ 1 57 50+ 1 48 SW-50S Light Grey 500-4726 unit 1+ 1 54 50+ 1 45 SW-55S Light Grey 373-2334 unit 1+ 1 54 50+ 1 45 SW-65S Light Grey 500-4732 unit 1+ 1 93 50+ 1 81 SW-75S Light Grey 373-2362 unit 1+ 2 05 50+ 1 93 SW-85S Light Grey 500-4748 unit 1+ 2 85 50+ 2 68 New products available online every week Manu. Part No. Colour SW-100S Light Grey 373-2407 unit 1+ 3 33 50+ 3 13 SW-120S Light Grey 373-2435 unit 1+ 3 33 50+ 3 13 SW-125S Light Grey 373-2457 unit 1+ 4 01 50+ 3 77 SW-130S Light Grey 500-4754 unit 1+ 3 55 50+ 3 34 SW-20B Black 500-4760 unit 1+ 1 41 50+ 1 33 SW-30B Black 500-4776 unit 1+ 1 49 50+ 1 40 SW-40B Black 373-2328 unit 1+ 1 41 50+ 1 33 SW-50B Black 500-4782 unit 1+ 1 54 50+ 1 45 SW-55B Black 373-2340 unit 1+ 1 62 50+ 1 SW-65B Black 500-4798 unit 1+ 1 93 50+ 1 81 SW-75B Black 373-2378 unit 1+ 2 16 50+ 2 03 SW-85B Black 500-4805 unit 1+ 2 85 50+ 2 68 SW-95B Black 373-2390 unit 1+ 2 94 50+ 2 76 SW-100B Black 373-2429 unit 1+ 3 70 50+ 3 48 SW-120B Black 373-2441 unit 1+ 3 33 50+ 3 13 SW-125B Black 373-2463 unit 1+ 4 49 50+ 4 22 SW-130B Black 500-4811 unit 1+ 3 20 50+ 3 00 Panel Mounting Plastic Instrument Cases Instrument Boxes Flame retardant material, glass fibre reinforced Noryl SE1 GFN2 to give good mechanical strength and electrical proties Moulded in card guides for 1.6mm PCBs Conforms to DIN 43700 Screw fitted 1.5mm Noryl rear panel Front panel projection; 8mm Supplied with: Red 3mm filter and blank 1.5mm natural aluminium front panel, both of which can be used behind the clipon bezel (panel can also be fixed with screws) also supplied with fixing clamps. 138 mm Black Body Material Glass Fibre Reinforced Noryl SE1 GFN2 Panel Cut Out 48 96 45 x 92 500-005 72 72 68 x 68 500-027 72 144 68 x 138 500-033 96 96 92 x 92 500-011 96 144 92 x 138 500-049 Panel Mounted Cases Perfect for enclosing instruments or P.C. boards that need to be panel mounter Moulded in flame retardant ABS Conforms with DIN43700 Moulded guides for 2 horizontally mounted PCBs (1.6mm thick) Slots in rear for PCB edge plugs (50mm for stock no. 508-706, 65mm for stock nos. 508-677 and 508-683) and socket mounting pillars for PCB edge connectors Front panel projection 7.5mm, 10mm; Case wall thickness 2mm Supplied with: Grey tinted acrylic filter and natural aluminium front panel both of which can be utilised behind the clip-on bezel. Body Material ABS Panel Material 18swg Natural Aluminium Internal Internal Panel Cut Out 75 48 96 86 38 45 x 92 508-677 120 36 72 62 26 33 x 68 508-706 120 48 96 86 38 45 x 92 508-683 Plug-In & DIN Rail Mounting Enclosures DIN Rail/Wall/Panel Mount 2-part, clip-together box which can be fitted to a DIN rail which conforms to the requirements of EN50022 or wall mounted with 2 screws Up part contains 12 screw terminals rated up to 10A (max cable dia. 2.5mm) Lower part has integral support for PCBs up to 2mm thick Oating temature range -10 C +80 C IP40 rated 110 Number Of Terminals 12 50 Material Up Part - Polycarbonate; Lower Part - Polystyrene 75 Colour Grey / Black 507-680 unit 1+ 25 50 15+ 24 00 50+ 23 00 48 96 500-005 unit 1+ 41 30 12+ 38 90 25+ 37 20 72 72 500-027 unit 1+ 41 40 12+ 38 90 25+ 37 30 72 144 500-033 unit 1+ 54 00 12+ 50 50 25+ 48 60 96 96 500-011 unit 1+ 42 90 12+ 40 80 25+ 39 10 96 144 500-049 unit 1+ 56 00 12+ 50 25+ 50 50 75 48 508-677 unit 1+ 25 80 15+ 23 50 50+ 22 50 120 36 508-706 unit 1+ 22 10 15+ 20 10 50+ 19 30 120 48 508-683 unit 1+ 36 10 15+ 32 90 50+ 31 50 1201

DIN Rail Mount Constructed from fully insulated polycarbonate to UL94V-2 Preformed pins allow simple connection from PCB to terminals Equipment can be fully assembled prior to location in housing Captive self locking terminal screws give high resistance to vibration Front cover easily removed and can be drilled or adapted for external components such as indicators or switches Integral guide rails for PCB location in multiple positions Removable front cover 75 Colour Light Grey Material Polycarbonate Light Grey Number Of Terminals 98 22.5 12 243-3632 110 55 16 243-3654 110 99.7 30 243-3660 98 22.5 243-3632 unit 1+ 29 70 15+ 27 90 50+ 26 70 110 55 243-3654 unit 1+ 33 30 15+ 31 30 50+ 30 00 110 99.7 243-3660 unit 1+ 61 00 15+ 57 50 50+ 55 00 8-Pin and 11-Pin Cases Black glass-filled nylon bases, incorporating location for PC cards Snap-fit polycarbonate covers Note: Kit consists of 1 x base and 1 x case. General Purpose ABS Enclosure ON-LINE Flanges For Mounting 60 35 Black RAL9011 Yes 513-5432 80 40 Black RAL9011 Yes 513-5448 Ideally suited for mounting printed circuit boards Integral card guides accept 1.5mm (0.062in.) PC cards Lap joint construction provides protection against ingress of dust and splashing water, IP54 Lid is secured with 4x0.5in. Phillips screws, black to match enclosure Black General Purpose ABS 50 35 20 381-5085 unit 1+ 1 25+ 1 42 100+ 1 36 60 35 20 381-5091 unit 1+ 1 99 25+ 1 85 100+ 1 77 80 40 20 381-5108 unit 1+ 2 29 25+ 2 14 100+ 2 03 50 35 20 a513-5353 unit 1+ 2 36 25+ 2 30 100+ 2 24 35 35 20 513-5454 unit 1+ 2 03 25+ 1 93 100+ 1 90 50 35 20 513-5426 unit 1+ 2 03 25+ 1 94 100+ 1 90 50 50 20 513-5476 unit 1+ 2 58 25+ 2 48 100+ 2 42 60 35 20 513-5432 unit 1+ 2 30 25+ 2 21 100+ 2 15 80 40 20 513-5448 unit 1+ 2 58 25+ 2 48 100+ 2 42 Description 8-pin base with 41mm cover 582-013 unit 1+ 5 10 15+ 4 80 50+ 4 62 8-pin base with 76mm cover 582-029 unit 1+ 7 55 15+ 7 10 50+ 6 85 11-pin base with 41mm cover 582-035 unit 1+ 6 50 15+ 6 20 50+ 5 95 11-pin base with 76mm cover 582-041 unit 1+ 5 90 15+ 5 60 50+ 5 40 General Purpose Plastic Cases & Boxes Two Tone Cases Two-part cases with a solid tongue and groove joint 4 bosses in the base for PCB mounting (no. 4 self-tapping screws) Impact resistant Enclosure Colour ABS Pebble Grey RAL7032 Off White (RAL9002) General Purpose ABS Enclosure - Flanged Lid Two piece lap joint construction Lid secured with self tapping screws Lid screws hidden when secured against a surface IP54 rated Integral 1.5 mm card guides 35 56 85 381-5186 unit 1+ 5 20 25+ 4 80 100+ 4 63 21 50 100 381-5192 unit 1+ 5 45 25+ 5 10 100+ 4 82 36 65 120 381-09 unit 1+ 7 20 25+ 6 70 100+ 6 35 25 71 165 381-15 unit 1+ 8 00 25+ 7 35 100+ 7 05 57 110 191 415-2846 unit 1+ 12 80 25+ 11 80 100+ 11 30 General Purpose ABS Black 100 50 25 583-072 unit 1+ 16 60 15+ 15 60 50+ 15 00 100 50 40 583-088 unit 1+ 18 00 15+ 17 10 50+ 16 50 120 65 40 583-094 unit 1+ 20 30 15+ 19 10 50+ 18 30 120 65 65 583-101 unit 1+ 23 10 15+ 21 80 50+ 20 80 150 80 50 583-117 unit 1+ 23 00 15+ 21 70 50+ 20 80 150 80 80 583-123 unit 1+ 28 30 15+ 26 70 50+ 25 50 189 110 60 583-139 unit 1+ 31 10 15+ 29 20 50+ 28 00 189 110 97 583-145 unit 1+ 34 20 15+ 32 20 50+ 30 80 189 110 120 583-151 unit 1+ 46 80 15+ 44 00 50+ 42 10 Flame Retardant IP54 ABS Boxes 85 56 39 382-2099 unit 1+ 5 25 25+ 4 87 100+ 4 69 100 50 25 a382-2106 unit 1+ 5 25+ 5 21 100+ 5 03 120 65 40 382-2112 unit 1+ 7 50 25+ 6 95 100+ 6 65 165 71 29 382-2128 unit 1+ 7 05 25+ 6 45 100+ 6 25 Miniature Moulded Cases The Hammond 1551 Series of miniature general purpose electronic enclosures are ideally suited for mounting small printed circuit boards. Ideally suited for mounting small printed circuit boards or used as potting boxes Satin textured finish ABS plastic 2 PCB stand-offs moulded into interior Lap joint construction provides protection against ingress of dust and splashing water, IP54 Assembled with 2 self tapping screws, colour matched to enclosure Note: length excludes flanges. 20 mm Flanges For Mounting 50 35 Grey RAL7035 No 381-5085 60 35 Grey RAL7035 No 381-5091 80 40 Grey RAL7035 No 381-5108 50 35 Black RAL9011 No 513-5353 35 35 Black RAL9011 Yes 513-5454 50 35 Black RAL9011 Yes 513-5426 50 50 Black RAL9011 Yes 513-5476 Moulded in flame retardant ABS plastic Two piece lap joint construction Provides protection against dust accumulation and splashing water Flammability rating of UL94V-0 Integral card guides accept 1.5mm PC cards Lid secured with M3 x 10 mm machine screws, threaded into tapped integral brass bushings Dimensions do not include lid. Add 4 mm to height for lid Note: Black enclosures include black screws, grey enclosures are standard nickel finish screws. Manu. Part No. 1591LBK 85 56 35 Black 493-5944 1591ABK 100 50 21 Black 493-5950 1591CBK 120 65 36 Black 493-5994 1591TBK 120 80 55 Black 493-6004 1591UBK 120 120 55 Black 493-6010 1591DBK 150 80 46 Black 493-6054 1591EBK 191 110 57 Black 493-6076 1591TGY 120 80 55 Grey 493-6155 1591UGY 120 120 55 Grey 493-6161 1202 OM = Order Multiple Indicates more pricing available online a New product to range

ORDERLINE 65 6865 3433 Manu. Part No. 1591LBK a493-5944 unit 1+ 7 10 5+ 6 95 10+ 6 76 1591ABK 493-5950 unit 1+ 5 50 5+ 5 25 10+ 5 10 1591CBK a493-5994 unit 1+ 10 60 5+ 10 40 10+ 10 10 1591TBK 493-6004 unit 1+ 10 40 5+ 9 95 10+ 9 65 1591UBK a493-6010 unit 1+ 14 10 5+ 13 80 10+ 13 40 1591DBK a493-6054 unit 1+ 11 90 5+ 11 60 10+ 11 30 1591EBK 493-6076 unit 1+ 15 10 5+ 14 40 10+ 14 10 1591TGY 493-6155 unit 1+ 10 40 5+ 9 95 10+ 9 65 1591UGY 493-6161 unit 1+ 12 00 5+ 11 50 10+ 11 20 Standard Lid ABS Boxes 2 part moulded boxes in 1.8mm thick ABS Slots on all 4 sides for vertically supporting 1.5mm PCBs (except for stock no. 505-555) Withstand tematures of up to 85 C Flame retardant versions have flammability rating of UL 94 V0 Potting Boxes Ideal for encapsulating small circuits Resistant to most chemicals Temature range of - 20 C to +94 C Can be machined, punched, embossed and printed on (RAL) Potting Boxes With Lids Multi-purpose boxes complete with lid and 4 x No. 2 self taps Wall thickness; 1.8mm nominal Ideal for encapsulating electronic circuits Temature range of - 20 C to +85 C (RAL) Translucent Blue Boxes ABS Black ABS Black Translucent flame retardant polycarbonate to UL94V-0 Almost totally transparent to infra-red devices, ideal for applications where parts, sensors or indicators need to be visible Integral card guides accept 1.5mm PCBs Two piece lap joint construction gives IP54 protection Lids secured with M3x10mm Philips machine screws, threaded into integral brass bushes to assist repeated removal of lid height includes 4mm for lid Manu. Part No. 1591ATBU 50 100 21 415-2745 1591CTBU 65 120 36 415-2767 60 25 100 508-986 unit 10+ 2 24 150+ 2 04 500+ 1 95 50 35 75 508-992 unit 10+ 1 72 150+ 1 56 500+ 1 50 50 30 50 509-002 unit 10+ 1 62 150+ 1 48 500+ 1 42 40 20 40 509-018 unit 10+ 1 26 150+ 1 15 500+ 1 10 20 15 30 509-024 unit 10+ 0 98 150+ 0 90 500+ 0 86 16 24 34 225-0061 unit 5+ 1 66 75+ 1 250+ 1 46 18 28 40 225-0083 unit 5+ 2 14 75+ 1 97 250+ 1 88 20 32 46 225-0099 unit 5+ 1 84 75+ 1 70 250+ 1 61 23 38 54 225-0112 unit 5+ 2 65 75+ 2 44 250+ 2 35 25 43 64 314-13 unit 5+ 3 01 75+ 2 77 250+ 2 64 29 49 74 314-29 unit 5+ 3 01 75+ 2 77 250+ 2 65 Manu. Part No. 1591ATBU 415-2745 unit 1+ 6 95 25+ 6 45 100+ 6 15 1591CTBU 415-2767 unit 1+ 8 65 25+ 8 00 100+ 7 65 Lid Colour Flame Retardant PCB Guide Type 55 2 Black No 2.1mm slots on 3.3mm pitch 281-6942 75 2 Black No 1.8mm slots on 6.6mm pitch 281-6863 85 4 Black No 1.8mm slots on 6.6mm pitch 281-6879 100 4 Black No 2.1mm slots on 5mm pitch 281-6885 112 4 Black No 2.1mm slots on 5mm pitch 281-6891 120 4 Black No 2.1mm slots on 3.3mm pitch 281-6908 150 4 Black No 2.1mm slots on 5mm pitch 281-6914 190 4 Black No 2.1mm slots on 5mm pitch 281-6920 55 2 Orange No 2.1mm slots on 3.3mm pitch 281-6936 75 2 Orange No 1.8mm slots on 6.6mm pitch 281-6784 85 4 Orange No 1.8mm slots on 6.6mm pitch 281-6790 100 4 Orange No 2.1mm slots on 5mm pitch 281-6807 112 4 Orange No 2.1mm slots on 5mm pitch 281-6829 126 4 Orange No 2.1mm slots on 3.3mm pitch 281-6835 150 4 Orange No 2.1mm slots on 5mm pitch 281-6841 190 4 Orange No 2.1mm slots on 5mm pitch 281-6857 100 4 Grey Yes 2.1mm slots on 5mm pitch 502-326 75 2 Grey Yes 1.8mm slots on 6.6mm pitch 502-332 85 4 Grey Yes 1.8mm slots on 6.6mm pitch 502-348 75 2 White No 1.8mm slots on 6.6mm pitch 502-607 85 4 White No 1.8mm slots on 6.6mm pitch 502-613 100 4 White No 2.1mm slots on 5mm pitch 502-629 112 4 White No 2.1mm slots on 5mm pitch 502-635 120 4 White No 2.1mm slots on 3.3mm pitch 502-641 150 4 White No 2.1mm slots on 5mm pitch 502-657 190 4 White No 2.1mm slots on 5mm pitch 502-663 118 24 Grey Yes 2.1mm slots on 3.3mm pitch 503-644 200 5 Grey No 2.1mm slots on 3.3mm pitch 503-650 55 2 Grey Yes 2.1mm slots on 3.3mm pitch 504-710 100 19 Grey No 2.1mm slots on 5mm pitch 505-549 143 15 Grey No No slots 505-555 150 30 Grey No 2.1mm slots on 5mm pitch 505-561 190 34 Grey No 2.1mm slots on 5mm pitch 505-577 112 4 Grey No 2.1mm slots on 5mm pitch 508-914 120 4 Grey Yes 2.1mm slots on 3.3mm pitch 508-920 150 4 Grey No 2.1mm slots on 5mm pitch 508-936 190 4 Grey Yes 2.1mm slots on 5mm pitch 508-942 55 55 42 281-6942 unit 1+ 4 15 25+ 3 85 100+ 3 70 75 49 27 281-6863 unit 1+ 3 36 25+ 3 11 100+ 2 99 85 56 40 281-6879 unit 1+ 5 60 25+ 5 20 100+ 5 00 100 50 25 281-6885 unit 1+ 7 05 25+ 6 55 100+ 6 30 112 62 31 281-6891 unit 1+ 7 30 25+ 6 75 100+ 6 50 120 65 40 281-6908 unit 1+ 7 40 25+ 6 75 100+ 6 50 150 80 50 281-6914 unit 1+ 9 10 25+ 8 35 100+ 8 05 190 110 60 281-6920 unit 1+ 12 10 25+ 11 20 100+ 10 70 55 55 42 281-6936 unit 1+ 3 29 25+ 3 05 100+ 2 93 75 49 27 281-6784 unit 1+ 3 36 25+ 3 11 100+ 2 99 85 56 40 281-6790 unit 1+ 5 60 25+ 5 20 100+ 5 00 100 50 25 281-6807 unit 1+ 5 60 25+ 5 20 100+ 5 00 112 62 31 281-6829 unit 1+ 6 20 25+ 5 75 100+ 5 50 126 65 40 281-6835 unit 1+ 6 85 25+ 6 25 100+ 6 00 150 80 50 281-6841 unit 1+ 7 75 25+ 7 10 100+ 6 85 190 110 60 281-6857 unit 1+ 11 90 25+ 10 90 100+ 10 40 100 50 25 502-326 unit 1+ 5 60 25+ 5 20 100+ 5 00 75 49 27 502-332 unit 1+ 3 95 25+ 3 66 100+ 3 85 56 40 502-348 unit 1+ 5 60 25+ 5 20 100+ 5 00 75 49 27 502-607 unit 1+ 3 36 25+ 3 11 100+ 2 99 85 56 40 502-613 unit 1+ 5 60 25+ 5 20 100+ 5 00 100 50 25 502-629 unit 1+ 5 60 25+ 5 20 100+ 5 00 112 62 31 502-635 unit 1+ 6 85 25+ 6 25 100+ 6 00 120 65 40 502-641 unit 1+ 6 85 25+ 6 30 100+ 6 00 150 80 50 502-657 unit 1+ 8 00 25+ 7 35 100+ 7 00 190 110 60 502-663 unit 1+ 12 40 25+ 11 40 100+ 10 90 118 64 60 503-644 unit 1+ 7 75 25+ 7 10 100+ 6 85 200 250 65 503-650 unit 1+ 22 40 25+ 20 60 100+ 19 70 55 55 42 504-710 unit 1+ 3 29 25+ 3 05 100+ 2 93 100 50 40 505-549 unit 1+ 6 95 25+ 6 45 100+ 6 15 143 80 30 505-555 unit 1+ 3 76 25+ 3 45 100+ 3 28 150 80 76 505-561 unit 1+ 11 20 25+ 10 30 100+ 9 85 190 110 90 505-577 unit 1+ 17 80 25+ 16 40 100+ 15 70 112 62 31 508-914 unit 1+ 6 85 25+ 6 20 100+ 5 95 120 65 40 508-920 unit 1+ 6 85 25+ 6 25 100+ 6 00 150 80 50 508-936 unit 1+ 9 10 25+ 8 35 100+ 8 05 190 110 60 508-942 unit 1+ 11 90 25+ 10 90 100+ 10 40 Many more leading brands from over 2,500 suppliers available online 1203

Lugged Lid Boxes 2 part moulded boxes in 1.8mm thick ABS Flanged boxes with flange lids Slots on all 4 sides for vertically supporting 1.5mm PCBs Withstand tematures of up to 85 C Flame retardant versions have flammability rating of UL 94 V0 Lid Colour 4 mm Grey Flame Retardant PCB Guide Type 112 62 31 No 2 mm Slots on 5 mm Pitch 505-511 120 65 40 Yes 2.1 mm slots on 3.3 mm pitch 505-7 150 80 50 No 2 mm slots on 5 mm pitch 505-533 112 62 31 505-511 unit 1+ 7 20 25+ 6 55 100+ 6 30 120 65 40 505-7 unit 1+ 7 45 25+ 6 85 100+ 6 60 150 80 50 505-533 unit 1+ 8 75 25+ 8 05 100+ 7 70 Metal & Plastic Consoles ON-LINE Terminal Case with Rear Chamber and Removable Lid Ergonomic 2-part case for desktop use or wall-mounting Bases contain a variety of PCB mounting bosses Front panel secured by self tapping countersunk screws Gasket provides protection to IP54 The Terminal Case with Rear Chamber and Removable Lid provides IP54 protection 272 mm Panel Material Aluminium 101 mm Off White RAL9002 Body Material ABS Panel Colour Anodised 120 65 501-569 unit 1+ 12 90 15+ 11 90 50+ 11 40 150 80 501-575 unit 1+ 12 80 15+ 11 90 50+ 11 30 190 110 501-581 unit 1+ 23 10 15+ 21 20 50+ 20 30 302 196-5970 unit 1+ 170 00 12+ 161 50 25+ 154 50 168 838-439 unit 1+ 98 00 12+ 93 00 25+ 89 00 Enclosure Mounting Kit Nylon mounting kits for mounting standard ABS enclosures to any surface Note: The mounting kit comprises of two end flanges, it does not include screws, please use screws from enclosure. Description Compatible Enclosure Type Flange, 55 mm, Fixing Centres 38 mm W or H 56 262-6317 Flange, 75 mm, Fixing Centres 51mm W or H 56-75 262-6323 Flange, 114mm, Fixing Centres 83mm W or H 75-118 262-6339 Compatible Enclosure Type ABS RFI Screened Temature resistance of up to 85 C IP65 rated when gasket fitted Lid to base fixing screws are hidden behind push on caps Wall mountable via separately designed feet or pre-cut knockout holes in base. Wall mounting kit available Vertical support guides for PCBs are incorporated in the base and lid together with 5mm high bosses to provide horizontal fixing Keyboard area on top and base of the box with 2 different sized areas Body colour grey RAL 7035 Supplied with: gasket. A B C D E F G H I 190 120 60 43.5 1 97.6 110.2x160.2 110.2x180.2 165 498-6992 220 145 50 33.5 182 122.9 135.2x210.2 135.2x210.2 195 498-7018 220 145 80 62.95 182 122.9 135.2x210.2 135.2x210.2 195 498-7024 RF Shielded ABS Boxes Moulded 1.8mm with an internal nickel acrylic coating, which improves EMI/RFI shielding. Resistant to impact, chemicals and weathering Attenuation 50-90dB (5-1800MHz) Surface resistivity <1.5Ω/0.025mm 2 Body colour Black PCB Guide Type 100 50 25 2 mm slots on 5 mm pitch 501-547 112 62 31 2 mm slots on 5 mm pitch 501-553 120 65 40 2.1 mm slot on 3.3 mm pitch 501-569 150 80 50 2 mm slots on 5 mm pitch 501-575 190 110 60 2 mm slots on 5 mm pitch 501-581 OM = Order Multiple W or H 56 262-6317 bag of 2 1+ 1 37 25+ 1 29 100+ 1 23 W or H 56-75 262-6323 bag of 2 1+ 1 23 25+ 1 13 100+ 1 11 W or H 75-118 262-6339 bag of 2 1+ 1 28 25+ 1 18 100+ 1 16 A B C 190 120 60 498-6992 unit 1+ 29 10 5+ 27 70 10+ 26 80 220 145 50 498-7018 unit 1+ 33 20 5+ 31 60 10+ 30 60 220 145 80 498-7024 unit 1+ 35 40 5+ 33 60 10+ 32 60 100 50 501-547 unit 1+ 7 25 15+ 6 60 50+ 6 40 112 62 501-553 unit 1+ 8 95 15+ 8 20 50+ 7 85 1204 Indicates more pricing available online Unidesk Terminal Cases Robust enclosure designed to be house office system terminals, point of sale terminals, medical devices, industrial control equipment, security units and other types of electronics Desk or wall mount Ergonomic front panel inclined 30 Flat rear section ideally suited to accept connectors and switches PCB mounting holes in base TÜV tested to IP54 (DIN EN 609) Kit includes case, front panel, PCB mounting pillars and 4 L shaped sealing gaskets 200 mm Panel Material Aluminium 102 mm Light Grey RAL7035 Body Material Aluminium Panel Colour Light Grey RAL7035 200 493-8577 unit 1+ 210 00 5+ 205 00 10+ 198 00 300 493-8583 unit 1+ 245 00 5+ 240 00 10+ 235 00 400 493-8599 unit 1+ 335 00 5+ 325 00 10+ 320 00 Small Desk Console 2-part instrument case with raised rear sections and 2 brushed aluminium panels for mounting displays, indicators and keyboards etc. Moulded bosses for PCB mounting Can withstand continuous heat up to 85 C Supplied with: Push in rubber feet Body Material ABS Grey RAL7032 Panel Material Aluminium Panel Colour Natural Satin Sloped Panel Case 2-part moulded case with aluminium front panels and bosses for mounting PCBs Can withstand continuous heat up to 85 C Base has push-in rubber feet Supplied with: Push in rubber feet Body Material ABS Grey RAL7032 Panel Material Aluminium Panel Colour Natural Satin Sloped Front ABS Cases Impact resistant Sloped front panels and non-removable plastic rear panels makes case durable and easy to design into Supplied with: 4 self-adhesive rubber feet Body Material ABS Bone Panel Material Aluminium Panel Colour Natural 230 145 400 207-1515 unit 1+ 111 50 12+ 102 50 25+ 98 00 185 117 265 507-006 unit 1+ 54 00 12+ 50 50 25+ 48 20 120 62 190 207-11 unit 1+ 43 80 12+ 39 90 25+ 38 20 185 78 262 207-1537 unit 1+ 61 50 12+ 56 50 25+ 54 50 230 85 400 507-012 unit 1+ 103 50 12+ 95 00 25+ 91 00

ORDERLINE 65 6865 3433 30 Degree Steel Aluminium Sloped Console Two part construction suitable for housing electrical/electronic modules and power supplies Secured by 4 self tapping screws Ventilation slots on either side Mild steel body with aluminium panel Body colour dark grey, panel light grey Supplied with: 4 self adhesive rubber feet. Body Material Panel Material Aluminium Top Slope and Dark Satin Gray Base, Back, Steel Base Light Grey Slope Top Aluminium Panel Light Grey RAL7035 Colour Sloped Panel Cases Impact resistant Sloped front panels PCB mounting guides and bosses moulded in walls Knockout keyhole slots in base Body MaterialABS Off White RAL9002/ Pebble RAL7032 Panel Material Aluminium Panel Colour Matt Anodised 138 47 max, 31.5 min 190 505-820 138 70 max, 54.5 min 190 505-836 216 76 max, 50 min 228 505-842 156 100 max, min 220 584-924 138 47 max, 31.5 min 505-820 unit 1+ 54 00 12+ 51 00 25+ 48 60 138 70 max, 54.5 min 505-836 unit 1+ 61 00 12+ 57 50 25+ 55 00 216 76 max, 50 min 505-842 unit 1+ 79 00 12+ 74 50 25+ 71 00 156 100 max, min 584-924 unit 1+ 58 00 12+ 54 50 25+ 00 Small Module Cases Side slots for PCB location Front panel secured via M3 screws to integral brass bushes Base has bosses for fixing PCBs Will withstand a continuous heat of up to 85 C Supplied with: 4 self-adhesive feet Body Material ABS Grey RAL7030 Panel Material Aluminium Panel Colour Natural Aluminium Instrument Consoles Aluminium alloy instrument console cases incorporating either 15 or 30 sloping top panels. The cases are blue and the top panels are white. Self-adhesive rubber feet are provided. 127 73 178 221-011 unit 1+ 60 00 12+ 56 00 25+ 53 50 204 102 254 221-027 unit 1+ 77 00 12+ 71 50 25+ 68 50 Dimensions Stock No. Sloped Area 232-724 114 x 93 232-730 1 x 93 232-746 190 x 93 232-7 190 x 93 232-910 216 x 95 232-774 346 x 95 159 58 max, 34 min 232-724 unit 1+ 25 50 12+ 23 50 25+ 22 50 159 58 max, 34 min 232-730 unit 1+ 34 30 12+ 31 60 25+ 30 30 159 58 max, 34 min 232-746 unit 1+ 41 30 12+ 38 00 25+ 36 40 158 102 max, 80 min 232-7 unit 1+ 49 30 12+ 45 50 25+ 43 50 150 100max, 50 min 232-910 unit 1+ 67 00 12+ 61 00 25+ 58 50 180 100 max, 50 min 232-774 unit 1+ 95 00 12+ 86 50 25+ 82 50 130 72 215 508-475 unit 1+ 18 90 15+ 17 40 50+ 16 60 96 57 161 508-481 unit 1+ 11 00 15+ 10 10 50+ 9 65 Dimensions Type Manu. Part. No. Top panel angle dimensions H (front) H (rear) W D 1 1456CE2WHBU 15 28 51 102 140 383-2311 2 1456FE2WHBU 15 28 51 165 140 383-2333 3 1456KH3WHBU 15 33 76 254 211 383-2349 4 1456PL3WHBU 15 33 76 356 287 383-2355 5 1456FE3WHBU 30 28 76 165 140 383-2361 6 1456KE3WHBU 30 28 76 254 140 383-2377 7 1456FG4WHBU 30 28 102 165 183 383-2383 8 1456KG4WHBU 30 28 102 254 183 383-2399 9 1456KK4WHBU 30 28 102 254 259 383-2406 10 1456PK4WHBU 30 28 102 356 259 383-2412 11 1456RK4WHBU 30 28 102 432 259 383-2428 Type 115 383-2311 unit 1+ 28 50 12+ 26 40 25+ 25 30 215 383-2333 unit 1+ 32 00 12+ 29 60 25+ 28 30 315 383-2349 unit 1+ 46 30 12+ 42 80 25+ 41 00 415 383-2355 unit 1+ 50 50 12+ 46 60 25+ 44 60 530 383-2361 unit 1+ 32 00 12+ 29 60 25+ 28 30 630 383-2377 unit 1+ 38 90 12+ 36 00 25+ 34 40 730 383-2383 unit 1+ 34 90 12+ 32 30 25+ 30 90 830 383-2399 unit 1+ 41 70 12+ 38 60 25+ 36 90 930 383-2406 unit 1+ 45 90 12+ 42 50 25+ 40 70 10 30 383-2412 unit 1+ 56 00 12+ 00 25+ 49 60 11 30 383-2428 unit 1+ 58 50 12+ 54 00 25+ 00 Plastic & Metal Handheld Cases NORVENT Enclosure Innovative and aesthetic designer enclosures by Jacob Jensen of Bang & Olufsen. Developed for a variety of hand held, desktop or wall mounted applications. Can be fitted with membrane keypads Integrated mounting boss for PCB and displays Black enclosure body with silver side frame IP65 in accordance with EN 609 Temature range -20 to +60 C Note: The descriptions with an F suffix have a recess for the foil. PC/ABS Black/silver 275 mm Description Manu. Part No. NORVENT S 121 35 27040100 703-2568 NORVENT L 166 35 27040200 703-2562 NORVENT XL with handle 166 50 27041300 703-2571 NORVENT S-F 121 35 27040101 703-2574 NORVENT L-F 166 35 27040201 703-2578 NORVENT XL-F with handle 166 50 27041301 703-2587 Description Manu. Part No. Soft-sided Handheld Enclosures Top cover is recessed for membrane display or keypad P.C Board standoffs are moulded into case Includes removable front panel and assembly hardware Over moulded in general purpose ABS plastic with a soft plastic grip in grey (RAL 7012) ABS NORVENT S 27040100 703-2568 unit 1+ 141 00 3+ 132 50 NORVENT L 27040200 703-2562 unit 1+ 147 00 3+ 138 00 NORVENT XL with 27041300 703-2571 unit 1+ 151 50 3+ 142 00 handle NORVENT S-F 27040101 703-2574 unit 1+ 155 50 3+ 146 00 NORVENT L-F 27040201 703-2578 unit 1+ 160 50 3+ 151 00 NORVENT XL-F with handle 27041301 703-2587 unit 1+ 164 00 3+ 154 00 Description Wall holder (for all sizes) 703-2580 unit 1+ 36 60 3+ 34 40 Integral Battery Compartment Body Colour Battery Size 117 79 24 No Black 513-117 79 24 No Grey 513-68 117 79 24 Yes Black 2xAA, 1xPP3 513-74 117 79 24 Yes Grey 2xAA, 1xPP3 513-96 147 89 24 No Black 513-5303 147 89 24 No Grey 513-5319 147 89 24 Yes Black 2xAA, 1xPP3 513-5325 147 89 24 Yes Grey 2xAA, 1xPP3 513-5331 Visit our website for additional price information and exciting promotions 1205

ON-LINE Manu. Part No. 1553BBK 513- unit 1+ 9 95 25+ 9 50 100+ 9 25 1553BGY 513-68 unit 1+ 11 10 25+ 10 60 100+ 10 30 1553BBKBAT 513-74 unit 1+ 14 90 25+ 14 20 100+ 13 80 1553BGYBAT 513-96 unit 1+ 16 70 25+ 16 00 100+ 15 60 1553DBK 513-5303 unit 1+ 10 60 25+ 10 20 100+ 9 90 1553DGY 513-5319 unit 1+ 12 20 25+ 11 70 100+ 11 30 1553DBKBAT 513-5325 unit 1+ 16 30 25+ 15 60 100+ 15 20 1553DGYBAT 513-5331 unit 1+ 18 40 25+ 17 50 100+ 17 10 Cases with Integral PP3 Battery Compartment ABS cases with a textured finish and removable front cover Cases with a PP3 compartment only are supplied with a battery connector Battery Size PP3 Body Colour 95 25 61 PC Bone 222-777 115 25 70 PC Bone 222-783 143 33 92 PC Bone 222-799 143 33 92 Black 506-025 115 25 70 Black 506-047 PC Bone 222-777 unit 1+ 8 95 15+ 8 35 50+ 7 95 PC Bone 222-783 unit 1+ 14 10 15+ 13 20 50+ 12 60 PC Bone 222-799 unit 1+ 12 00 15+ 11 30 50+ 10 80 Black 506-025 unit 1+ 14 30 15+ 13 30 50+ 12 70 Black 506-047 unit 1+ 14 10 15+ 13 20 50+ 12 60 High Impact, Polystyrene Anodised aluminium front panels Battery compartment with slide in snap locking cover PCBs can be mounted either vertically in guides, or horizontally on pillars with No. 4 self taps Stock nos 583-230 and 583-246 accept 100x160 eurocards Battery connector required for PP3 models, AA models supplied with a series connecting tag mobilcase ABS Off-White RAL9002 Battery Size 114 33 72 PP3 583-195 114 45 72 PP3 583-202 158 33 95 4xAA 583-218 158 45 95 4xAA 583-224 190 45 138 4xAA 583-230 190 68 138 4xAA 583-246 Extruded enclosures for portable electronics. Aluminium handheld enclosures for indoor & outdoor applications Enclosures with two-part extrusion which snaps together for easy mounting of PCBs with pre-fitted displays, keypads, switches, etc Recessed area in case extrusion for membrane keypads or product labels Waterproof and watertight Deep lid with large screw plug for inserting battery pack or a cable gland Note: The shoulder strap only fits the hand held cases. 114 33 72 583-195 unit 1+ 29 10 12+ 27 30 25+ 26 20 114 45 72 583-202 unit 1+ 29 70 12+ 27 90 25+ 26 70 158 33 95 583-218 unit 1+ 38 30 12+ 36 10 25+ 34 50 158 45 95 583-224 unit 1+ 39 90 12+ 37 50 25+ 35 90 190 45 138 583-230 unit 1+ 47 10 12+ 44 30 25+ 42 40 190 68 138 583-246 unit 1+ 49 30 12+ 46 30 25+ 44 40 Aluminium/die-cast zinc alloy 138 mm Silver/black 32 mm Description Manu. Part No. Hand held case, 138x160x100mm 160 253.100.165 703-9850 Tilt stand case, 138x160x100mm 160 253.100.168 703-9869 Hand held case, 138x200x100mm 200 253.100.205 703-9862 Tilt stand case, 138x200x100mm 200 253.100.208 703-9866 Description Hand held case, 138x160x100mm 703-9850 unit 1+ 96 00 12+ 90 50 25+ 86 50 Tilt stand case, 138x160x100mm 703-9869 unit 1+ 160 00 12+ 150 00 25+ 144 00 Hand held case, 138x200x100mm 703-9862 unit 1+ 101 00 12+ 95 00 25+ 91 00 Tilt stand case, 138x200x100mm 703-9866 unit 1+ 164 00 12+ 154 00 25+ 147 50 Description Battery holder, 2xAA 703-9875 unit 1+ 11 40 12+ 10 70 25+ 10 30 Battery holder, 4xAA 703-9878 unit 1+ 13 30 12+ 12 50 25+ 11 90 Shoulder strap for hand held 703-9872 unit 1+ 55 00 12+ 51 50 25+ 49 40 Alubos IP65 Aluminium Hand Held Black powder coated aluminium extrusion EMC screening PCB slots Two Lids required extrusion, these are available separately with 2 choices; Closing Lid; one piece cover with 1 mm deep recessed membrane area Mounting Lid; two piece cover with snap-in aluminium panel 1.2 mm thick Supplied with: Black lid seal, screws and screw covers 32 mm Black Aluminium Miniature Shell Type Cases Two-part cases with tongue and groove joints secured by self-tapping screws (supplied) Fastening towers for 61 x 39mm size PCBs in both top and bottom parts 85 mm ABS 45 mm Off White RAL9002 33 222-317 unit 1+ 18 60 15+ 17 50 50+ 16 70 Hand-Held Case Durable instrument cases moulded in ABS with a textured finish. Dimensions Description Size 1 23 68 117 Size 2 33 68 117 Size 3 28 90 146 Size 4 25 57 60 Size 12 28 103 191 Description Size 1 PC Bone 222-806 unit 1+ 12 80 15+ 11 90 50+ 11 40 Size 3 PC Bone 222-812 unit 1+ 12 50 15+ 11 50 50+ 11 00 Size 4 Black 139-669 unit 1+ 3 78 15+ 3 57 50+ 3 38 Size 1 Black 506-031 unit 1+ 13 00 15+ 12 10 50+ 11 60 Size 3 Black 506-019 unit 1+ 10 50 15+ 9 80 50+ 9 35 Size 2 Black 239-7261 unit 1+ 14 50 15+ 13 50 50+ 12 90 Size 12 Black 119-6348 unit 1+ 14 90 15+ 13 90 50+ 13 30 Windowed Plastic & Metal Hand Held Cases Sloped Panel Case Battery compartment with removable cover (supplied with battery connector) Supplied with: blank and bezel panels to fit into the sloped area. ABS Battery Size 1xPP3 PC Bone Usable Panel Panel Max PCB Area Thickness Size 147 82.5 x 78.5 mm 2.03 100.33 x 83.8 222-828 191 109.2 x 88.9 mm 2.9 144.8 x 95.2 222-834 100 82 298-19 unit 1+ 20 30 15+ 19 10 50+ 18 30 150 82 298-1535 unit 1+ 30 60 15+ 28 80 50+ 27 60 200 82 298-1541 unit 1+ 38 40 15+ 36 10 50+ 34 60 100 106 298-1557 unit 1+ 22 20 15+ 20 90 50+ 20 00 150 106 298-1579 unit 1+ 33 30 15+ 31 30 50+ 30 00 200 106 298-1585 unit 1+ 44 50 15+ 41 80 50+ 40 00 Description Closing Lid (D10.5 x W82 x H32) 298-1591 unit 1+ 11 20 15+ 10 60 50+ 10 10 Closing Lid (D10.5 x W106 x H32) 298-1608 unit 1+ 12 00 15+ 11 30 50+ 10 80 Mounting Lid (D14 x W82 x H32) 298-1614 unit 1+ 19 30 15+ 18 20 50+ 17 40 Mounting Lid (D14 x W106 x H32) 298-1636 unit 1+ 19 60 15+ 18 40 50+ 17 70 147 92 49 222-828 unit 1+ 19 70 12+ 18 30 25+ 17 60 191 102 53 222-834 unit 1+ 23 00 12+ 21 40 25+ 20 50 1206 OM = Order Multiple Indicates more pricing available online

ORDERLINE 65 6865 3433 Wrap Round Window Moulded black ABS cases with a textured finish Removable battery compartment covers All types incorporate pillars for mounting PCBs etc. ABS 100 mm Black 40 mm 196 mm Battery Size 4x1.5V, 2xPP3 Polyamide Hand Held Enclosures 581-644 unit 1+ 40 60 12+ 38 20 25+ 36 60 Recessed Window Moulded black ABS cases with a textured finish Removable battery compartment covers All types incorporate pillars for mounting PCBs etc. 120 mm ABS 60 mm Black 25 mm Battery Size 1xPP3 581-622 unit 1+ 24 10 12+ 22 70 25+ 21 80 IP65 - Beluga 180 Ex Closed hand held enclosure for hazardous environments Consisting of top part, bottom part, enclosure and board mounting screws, sealing rings, tongue-and-groove-system with integrated seal Flammability HB / UL 94 Surface Resistance: <109 Ω to EN 50014 IP65, EN 609 Temature range -20 to 60 C Group & Category: II 2 G / EEx e II Certificate No.: PTB02 ATEX 1076U Polyamide 12 50 mm 187 mm Black RAL 9005 106 mm 705-2130 unit 1+ 83 50 3+ 80 00 6+ 76 00 Description Hook set with magnet 705-2146 unit 1+ 21 90 3+ 21 00 6+ 20 00 IP65 - Beluga 220 Ex Hand held enclosure for hazardous environments Consisting of top part, bottom part, enclosure and board mounting screws, sealing rings, tongue-and-groove-system with integrated seal Flammability HB / UL 94 Surface Resistance: <109 Ω to EN 50014 IP65, EN 609 Temature range -20 to 60 C Group & Category: II 2 G / EEx e II Certificate No.: PTB02 ATEX 1076U Polyamide 12 51 mm 220 mm Black RAL 9005 116 mm 705-2134 unit 1+ 93 50 3+ 90 00 6+ 85 00 IP65 - Beluga 380 Ex Hand held enclosure for hazardous environments Consisting of top part, bottom part, enclosure and board mounting screws, sealing rings, tongue-and-groove-system with integrated seal Flammability HB / UL 94 Surface Resistance: <109 Ω to EN 50014 IP65, EN 609 Temature range -20 to 60 C Group & Category: II 2 G / EEx e II Certificate No.: PTB02 ATEX 1076U Polyamide 12 68 mm 380 mm Black RAL 9005 117 mm Ideal for measurement work and mobile testing Handle to box and black front panel (secured with countersunk screws) fully sealed by gasket Handle can house battery if required Impact resistance >7Nm, DIN 50014 IP65, DIN50014 rated Temature range; -40 C to +85 C Ergonomic handle provides strain-free use Supplied with: wall mounting bracket and IP65 sealed M20 cable galnd with anti-kink device. 186-9951 186-9973 186-9989 186-9995 187-0002 A (box Ext.) 85 115 85 160 105 B (box Ext.) 85 85 115 105 160 C 77 107 77 1 97 D 77 77 107 97 1 E 70.5/68 100.5/98 70.5/68 145.5/143 90.5/88 F 70.5/68 70.5/68 100.5/98 90.5/88 145.5/143 G 65 95 65 140 85 H 65 65 95 85 140 K 55/53 85/83 55/53 130/128 75/73 L 55/53 55/53 85/83 75/73 130/128 M 206 206 236 226 281 N 85 85 85 85 85 O 80 80 80 80 80 P 63.5 63.5 63.5 63.5 63.5 Q 191 191 221 211 266 Polyamide Yellow RAL1021 Windowed Plastic & Metal Hand Held Cases - TS 3 DIN Rail Clip Fixing clip for TS 35 (Top Hat) DIN rails Holder consists of two pieces - the foot and the latch Latch can be fixed on the foot in different positions to accommodate enclosure lengths from 70 to 160mm 186-6788 unit 1+ 7 50 12+ 7 10 25+ 6 80 Transformer & Power Supply Cases Wall Mounted Transformer Cases 2-part enclosure (Lid and Base) Slotted base and lid aid ventilation Keyhole fixing ature s in base for wall mounting Supplied with: Self-tapping assembly Enclosure Colour Zinc Coated Steel White 85 191 186-9951 unit 1+ 149 50 12+ 142 00 25+ 139 00 85 191 186-9973 unit 1+ 165 00 12+ 156 50 25+ 153 50 115 221 186-9989 unit 1+ 165 00 12+ 156 50 25+ 153 50 105 211 186-9995 unit 1+ 187 00 12+ 177 50 25+ 174 00 160 266 187-0002 unit 1+ 220 00 12+ 210 00 25+ 205 00 180 89 80 232-030 1 box 1+ 23 20 12+ 21 60 25+ 20 60 200 123 92 232-074 1 box 1+ 26 60 12+ 24 70 25+ 23 70 257 130 112 232-068 1 box 1+ 41 90 12+ 39 00 25+ 37 30 298 148 115 232-305 1 box 1+ 56 50 12+ 50 25+ 50 50 367 146 115 232-024 1 box 1+ 36 00 12+ 33 50 25+ 32 10 705-2143 unit 1+ 183 00 3+ 175 50 6+ 166 50 New products available online every week 1207

Heavy Duty Transformer Case 2-part aluminium enclosure ideal for use with large transformers etc. Designed with lifting recesses and internal sub-chassis for heavy mains supply isolation transformers or other electric/electronic assemblies Integral pre-drilled stand-off plate Ventilation louvres Supplied with: earthing bolt, rubber feet and grommets. 241 mm Aluminium 221 mm Enclosure Colour Dove Grey 366 mm Manu. Part No. 516-0010 507-466 unit 1+ 300 00 6+ 275 00 Metal Instrument Cases Small Instrument Case Two part cases in mild steel joined together by 4 self-tapping screws Ventilation louvres on each side Mild steel construction Body colour dark grey, panel light grey Supplied with: self-adhesive rubber feet. Body Material Galvanized Mild Steel Light Grey Panel Material Galvanized Mild Steel Panel Colour Light Grey Two Tone Grey cases Painted Sheet Steel housing 1 Anodised aluminium Side Panel 1 Light Grey (RAL7035) painted Side Panel Body Material 0.8mm Zintec Light Grey RAL7035 Panel Material Aluminium/Steel Panel Colour Anodised/Light Grey Retex Solbox Cases ON-LINE Epoxy finished steel cases with front and rear panels Removable side plates are placed internally enabling mounting of PCBs and mounting trays Supplied with: non-slip feet 204 1 76 232-232 1 box 1+ 100 00 12+ 93 00 25+ 89 00 300 200 100 232-276 1 box 1+ 94 00 12+ 87 00 25+ 83 50 406 197 159 232-282 1 box 1+ 111 50 12+ 104 00 25+ 99 50 254 197 159 232-311 1 box 1+ 99 50 12+ 92 50 25+ 88 50 Body Material Steel Polar Grey Panel Material Aluminium Panel Colour Anodised Material 135 55 80 0.9mm Mild Steel 232-780 179 74 97 0.9mm Galv. Mild Steel 232-796 220 95 125 0.9mm Galv. Mild Steel 232-926 Module Case 2 part steel cases with ventilation louvres Accommodates battery chargers and PSUs Cases not pre-drilled Panel area; stock no. 232-803 197x117 mm, stock no. 232-819 295x157 mm Assembled with 8 machine screws for repetitive assembley & disassembley Supplied with: 4 self adhesive rubber feet and required hardware. Body Material Galvanized Mild Steel Light Grey Panel Material Galvanized Mild Steel Panel Colour Light Grey Manu. Part No. 250 120 200 518-0910 232-803 200 160 300 518-0920 232-819 Equipment Housings Metal equipment housings with top, bottom and side panels Case heights conform to IEC297 Side members have slotted brackets for mounting PCBs or chassis plates Supplied with: 4 self-adhesive rubber feet, all fixings and assembly instructions, in flat pack from. Panel Material Aluminium Panel Colour Light Grey Dark Grey RAL7031 Body Material Phosphorus Steel 55 80 232-780 unit 1+ 18 50 12+ 17 00 25+ 16 30 74 97 232-796 unit 1+ 24 60 12+ 22 70 25+ 21 70 95 125 232-926 unit 1+ 39 80 12+ 36 70 25+ 35 10 Manu. Part No. 518-0910 232-803 unit 1+ 75 00 12+ 69 00 25+ 66 50 518-0920 232-819 unit 1+ 120 00 12+ 110 00 25+ 105 50 177.8 203 65 222-020 unit 1+ 38 20 12+ 35 10 25+ 33 60 177.8 305 65 222-036 unit 1+ 56 50 12+ 00 25+ 49 80 177.8 432 65 224-026 unit 1+ 51 00 12+ 46 90 25+ 44 90 177.8 203 88 223-972 unit 1+ 00 12+ 47 90 25+ 45 80 177.8 305 177 223-994 unit 1+ 63 00 12+ 58 00 25+ 55 50 279.4 203 65 222-042 unit 1+ 40 30 12+ 37 00 25+ 35 50 279.4 305 65 224-004 unit 1+ 57 50 12+ 53 00 25+ 50 50 279.4 305 88 222-058 unit 1+ 78 00 12+ 72 00 25+ 68 50 279.4 203 133 223-988 unit 1+ 73 50 12+ 67 50 25+ 64 50 279.4 305 133 222-064 unit 1+ 83 50 12+ 77 50 25+ 74 50 279.4 432 133 222-070 unit 1+ 116 50 12+ 107 00 25+ 102 50 279.4 305 177 222-086 unit 1+ 89 00 12+ 84 50 25+ 81 00 279.4 432 177 222-092 unit 1+ 118 00 12+ 108 50 25+ 104 00 279.4 305 222 224-010 unit 1+ 104 50 12+ 96 00 25+ 92 00 279.4 432 222 224-032 unit 1+ 135 50 12+ 124 50 25+ 119 00 Unicase without Handle Removable top and bottom panels which fit into internal aluminium extrusions Slots for PCBs or chassis plates Supplied with: 4 rubber feet, all fixings and assembly instructions. Body Material Aluminium Light Grey RAL7035 Panel Material Aluminium Panel Colour Anodised 150 110 70 170-7853 unit 1+ 38 30 200 140 80 170-7869 unit 1+ 54 00 250 160 100 170-7926 unit 1+ 60 00 Universal Aluminium Sash Case Bronze-anodised radiused-corner cases with extruded aluminum top and bottom covers. The covers have 2 or 3 pre-formed panel/board location grooves at the front and rear of the case. Top and Bottom cover Material/Colour A6063S-T5/Bronze anodised Panel x 2 A1050p-H24 1.7t/Bronze anadised Side clasp x 2 SPCC 2.0t/Chromate plated Mounting screws x 1 set Steel countersunk screw/black chromate Rubber foot x 4 Natural rubber/black Side clasp x 2 SPCC 2.0t/Chromate plated 180 185 65 222-109 unit 1+ 89 00 6+ 84 50 250 260 90 222-115 unit 1+ 111 50 6+ 106 00 250 350 110 222-121 unit 1+ 157 00 6+ 149 00 300 261 134 818-621 unit 1+ 176 00 6+ 167 00 300 367 134 818-637 unit 1+ 178 50 6+ 169 50 300 474 134 818-643 unit 1+ 205 00 6+ 194 00 Takachi Electric Industrial Manu part no. W H D Panel thickness Weight (kg) Ventilated UC6-3-8DD 60 35 80 2.0 0.12 no 401-8819 UC7-3-10DD 75 30 100 2.0 0.16 no 401-8825 UC7-8-14DD 75 85 140 2.5 0.37 no 401-9137 UC8-3-6DD 80 30 60 2.0 0.10 no 401-8932 UC9-5-12DD 90 50 120 2.5 0.29 no 401-8831 UC10-4-14DD 100 40 140 2.5 0.32 no 401-8847 UC10-11-18DD 100 110 180 3.0 0.72 no 401-9159 UC11-3-8DD 110 30 80 2.0 0.17 no 401-8948 UC11-5-8DD 110 50 80 2.0 0.20 no 401-8954 UC12-7-16DD 120 70 160 3.0 0.56 no 401-8869 UC12-14-22DD 120 140 220 3.0 1.08 YES 401-9165 UC13-4-18DD 130 40 180 3.0 0.56 no 401-8875 UC14-4-10DD 140 40 100 2.0 0.27 no 401-8960 UC14-6-10DD 140 60 100 2.0 0.31 no 401-8976 UC15-10-12DD 150 100 120 2.5 0.53 no 401-8982 UC15-8-20DD 150 80 200 3.0 0.86 YES 401-8881 UC15-18-28DD 150 180 280 3.0 1.74 YES 401-9171 UC16-5-22DD 165 50 220 3.0 0.84 YES 401-8897 UC17-5-12DD 170 50 120 2.5 0.45 no 401-8998 UC17-7-12DD 170 70 120 2.5 0.51 no 401-9008 UC18-10-24DD 180 100 240 3.0 1.26 YES 401-8904 UC18-21-34DD 180 210 340 3.2 2.63 YES 401-9187 UC20-5-14DD 200 50 140 2.5 0.56 no 401-9014 UC20-8-14DD 200 80 140 2.5 0.67 no 401-9020 1208 OM = Order Multiple Indicates more pricing available online

ORDERLINE 65 6865 3433 Manu part no. W H D Panel thickness Weight (kg) Ventilated UC20-12-16DD 200 120 160 3.0 0.82 no 401-9036 UC24-14-34DD 240 140 340 3.2 2.54 YES 401-8926 UC26-5-18DD 260 50 180 3.0 1.02 YES 401-9042 UC26-10-18DD 260 100 180 3.0 1.26 YES 401-9058 UC26-7-20DD 260 70 200 3.0 1.23 YES 401-9064 UC32-5-22DD 320 50 220 3.0 1.45 YES 401-9070 UC32-12-22DD 320 120 220 3.0 1.88 YES 401-9092 UC32-8-24DD 320 80 240 3.0 1.76 YES 401-9109 UC43-5-28DD 430 50 280 3.0 2.37 YES 401-9115 UC43-14-28DD 430 140 280 3.0 3.05 YES 401-9121 Manu. Part No. UC6-3-8DD 401-8819 unit 1+ 19 80 25+ 18 30 UC7-3-10DD 401-8825 unit 1+ 24 10 25+ 22 30 UC10-4-14DD 401-8847 unit 1+ 32 90 15+ 30 50 UC12-7-16DD 401-8869 unit 1+ 45 90 15+ 42 50 UC15-8-20DD 401-8881 unit 1+ 67 50 15+ 62 50 UC16-5-22DD 401-8897 unit 1+ 65 50 15+ 61 00 UC18-10-24DD 401-8904 unit 1+ 100 00 15+ 92 50 UC24-14-34DD 401-8926 unit 1+ 158 50 6+ 146 50 UC11-3-8DD 401-8948 unit 1+ 24 70 25+ 22 80 UC11-5-8DD 401-8954 unit 1+ 27 60 25+ 25 60 UC14-4-10DD 401-8960 unit 1+ 32 00 25+ 29 60 UC14-6-10DD 401-8976 unit 1+ 35 10 15+ 32 50 UC15-10-12DD 401-8982 unit 1+ 40 10 15+ 37 10 UC17-5-12DD 401-8998 unit 1+ 40 10 15+ 37 10 UC17-7-12DD 401-9008 unit 1+ 43 90 15+ 40 60 UC20-5-14DD 401-9014 unit 1+ 45 90 15+ 42 50 UC20-8-14DD 401-9020 unit 1+ 53 50 15+ 49 60 UC20-12-16DD 401-9036 unit 1+ 72 00 15+ 66 50 UC26-10-18DD 401-9058 unit 1+ 93 00 15+ 86 00 UC26-7-20DD 401-9064 unit 1+ 100 50 15+ 93 00 UC32-12-22DD 401-9092 unit 1+ 141 00 15+ 130 50 UC32-8-24DD 401-9109 unit 1+ 124 50 15+ 115 50 UC43-5-28DD 401-9115 unit 1+ 161 50 15+ 149 50 UC43-14-28DD 401-9121 unit 1+ 220 00 6+ 205 00 UC10-11-18DD 401-9159 unit 1+ 61 50 15+ 57 00 UC15-18-28DD 401-9171 unit 1+ 121 50 15+ 112 50 Metal Case YM Series Compact slim design Colour tone matched for a smart appearance in electronic and electrical applications Cover Material/Color Chassis Rubber foot x 4 Dimensions A1050P-H24 1.0t/HL Silver alumite A1100p-H24 1.0t/Aluminum black Natural rubber/black Takachi Electric Industrial Manu. Part No. Weight (g) YM-90 90 20 60 55 500-4647 YM-100 100 30 70 80 373-2233 YM-130 130 30 90 115 373-2249 YM-150 150 40 100 155 373-2255 YM-180 180 40 130 230 373-2261 YM-250 250 50 170 395 373-2283 YM-350 350 55 230 680 500-4675 YM-400 400 55 250 815 500-4681 Manu. Part No. YM-90 500-4647 unit 1+ 8 30 25+ 7 65 YM-100 373-2233 unit 1+ 9 20 25+ 8 50 YM-130 373-2249 unit 1+ 12 40 25+ 11 50 YM-150 373-2255 unit 1+ 14 00 25+ 13 00 YM-180 373-2261 unit 1+ 18 60 25+ 17 20 YM-250 373-2283 unit 1+ 32 20 25+ 29 80 YM-350 500-4675 unit 1+ 53 50 15+ 49 50 YM-400 500-4681 unit 1+ 50 15+ 48 70 Metal Instrument Cases - Handles Profiled Aluminium Handles Profiled natural anodised aluminium 12 mm 12 mm 28 mm Fixing Centres 90 mm Bar Handles Polished chrome-plated mild steel handles Supplied with M5 fixing screws and washers Self-locking nuts and studs supplied for an alternative mounting method Supplied with: M5 fixing screws and washers. General Purpose Aluminium & Steel Boxes & Cases Heat Sink Cases with Lid Designed for PCB card mounting, particularly Eurocards Anodised aluminium body formed from a single hollow extrusion with 2 matching end plates with removable lid Cooling fins PCB slots and 2 x T-slots for mounting purposes Mounting kit and gaskets are available separately 60.5 mm Panel Material Anodised Aluminium 105 mm Black Body Material Anodised Aluminium Panel Colour Black 125 297-1285 unit 1+ 55 50 12+ 50 25+ 50 00 165 297-1291 unit 1+ 63 00 12+ 59 00 25+ 56 50 200 297-1308 unit 1+ 71 00 12+ 66 50 25+ 64 00 285 297-1336 unit 1+ 87 00 12+ 82 00 25+ 78 50 1.0mm Mild Steel Cases Painted Light Grey (RAL 7035) Two part construction (Lid and Base) 221-320 bag of 2 1+ 19 60 12+ 18 40 25+ 17 60 9.5 mm 33.5 mm Fixing Centres 101.6 502-102 box of 2 1+ 54 50 12+ 51 00 25+ 49 00 127 583-820 box of 2 1+ 59 00 12+ 55 00 25+ 50 Description Gaskets 297-1342 bag of 2 1+ 11 30 12+ 11 10 25+ 10 80 Mounting Kit 297-1358 bag of 2 1+ 13 50 12+ 12 70 25+ 12 20 230 80 40 231-986 1 box 1+ 25 10 12+ 23 30 25+ 22 30 330 100 45 232-119 1 box 1+ 32 20 12+ 30 00 25+ 28 70 430 150 50 232-096 1 box 1+ 38 90 12+ 36 20 25+ 34 70 Sheet Steel Instrument Cases Sheet steel instruments cases in grey with black end panels Front panel plain, rear panel ventilated Self adhesive rubber feet are included Dimensions Type dimensions Hammond part no. W. D. H. 1 101 1 101 1401AAA 2 1 1 127 1401AA 3 1 254 127 1401A 5 203 203 203 1401E 6 254 305 229 1401G 7 254 356 165 1401K Type 1 385-8818 unit 1+ 60 50 12+ 56 00 25+ 53 50 2 385-8824 unit 1+ 65 00 12+ 60 00 25+ 57 50 3 385-8830 unit 1+ 70 00 12+ 65 00 25+ 62 00 5 385-8868 unit 1+ 78 50 12+ 72 50 25+ 69 50 6 385-8874 unit 1+ 102 50 12+ 95 00 25+ 91 00 7 385-8880 unit 1+ 106 50 12+ 98 50 25+ 94 50 Flanged Cases Two part painted construction Designed for wall or surface mounting Top and Base Earth studs +120 C Recommended maximum working temature 1.0mm Mild Steel Dark Grey RAL 7031 65 85 42 232-125 1 box 1+ 19 90 12+ 18 50 25+ 17 70 88 142 58 232-103 1 box 1+ 23 50 12+ 21 90 25+ 20 90 110 200 72 232-080 1 box 1+ 28 20 12+ 26 20 25+ 25 10 Many more leading brands from over 2,500 suppliers available online 1209

Hinged Lid Cases Case Lid screw fixed, Concealed hinge located on dimension Lid and Body earth studs Recommended maximum working temature +120 C Diecast boxes for PC cards ON-LINE Unpainted diecast boxes which incorporate slots for mounting printed circuit boards They offer improved EMI/RFI shielding and ingress protection to IP54 1.2mm Mild Steel Cases Painted Light Grey (RAL 7035) Two part construction (Lid and Base) Light Grey Cases Painted Light Grey (RAL 7035) Two part construction (Lid and Base) Steel Utility Cases Dark Grey 1.0 mm Mild Steel Steel utility cases with a grey stove-enamelled finish. Cases have removable front and rear covers. 185 100 45 232-254 1 box 1+ 23 00 12+ 21 40 25+ 20 50 144 225 55 232-248 1 box 1+ 30 90 12+ 28 70 25+ 27 50 270 190 70 232-018 1 box 1+ 32 30 12+ 30 00 25+ 28 70 310 230 80 232-002 1 box 1+ 38 20 12+ 35 50 25+ 34 00 350 270 95 231-992 1 box 1+ 58 00 12+ 54 00 25+ 51 50 240 200 85 232-153 1 box 1+ 53 50 12+ 49 80 25+ 47 70 315 225 85 231-970 1 box 1+ 45 50 12+ 42 30 25+ 40 50 330 290 85 232-131 1 box 1+ 63 00 12+ 58 50 25+ 56 00 1.2mm Mild Steel Grey RAL7035 150 150 90 232-0 1 box 1+ 34 20 12+ 31 80 25+ 30 40 200 150 90 232-204 1 box 1+ 39 60 12+ 36 80 25+ 35 20 200 200 100 232-197 1 box 1+ 00 12+ 48 20 25+ 46 10 Dimensions Manu. Part No. Type 1415B 2 102 76 127 385-8925 1415C 3 1 102 127 385-8931 1415D 4 1 1 1 385-8947 1415E 5 229 127 1 385-8953 1415F 6 254 178 203 385-8969 1415G 7 305 1 178 385-8975 1415H 8 254 203 254 385-8981 1415I 9 305 203 279 385-8997 1415J 10 383 179 230 385-9007 Manu. Part No. 1415B 385-8925 unit 1+ 19 50 6+ 18 30 15+ 17 50 1415C 385-8931 unit 1+ 23 00 6+ 21 60 15+ 20 60 1415D 385-8947 unit 1+ 35 40 6+ 33 20 15+ 31 70 1415E 385-8953 unit 1+ 38 30 6+ 36 00 15+ 34 50 1415F 385-8969 unit 1+ 66 00 6+ 61 50 15+ 59 00 1415G 385-8975 unit 1+ 62 50 6+ 58 50 15+ 56 00 1415H 385-8981 unit 1+ 76 50 6+ 72 00 15+ 68 00 1415I 385-8997 unit 1+ 91 50 6+ 86 50 15+ 81 50 1415J 385-9007 unit 1+ 89 50 6+ 84 50 15+ 80 00 Dimensions Hammond part no. dimensions l. w. d. 1590L 101 50 25 1590M 114 63 31 1590N 121 66 40 1590P 153 82 50 1590R 192 111 61 Manu. Part No. 1590L 383-2434 unit 1+ 11 10 15+ 10 30 25+ 9 35 1590M 383-2440 unit 1+ 13 50 15+ 12 50 25+ 11 50 1590N 383-2456 unit 1+ 15 20 15+ 14 10 25+ 12 80 1590P 383-2462 unit 1+ 19 90 15+ 18 40 25+ 16 80 1590R 383-2478 unit 1+ 30 90 15+ 28 60 25+ 26 20 Natural Finish Die Cast Aluminium Boxes - High Temature EMI/RFI - Flanged Diecast aluminium alloy (LM24,BS1490) Lid with lip ensures EMI/RFI screening better than 40dB at 1.0MHz & 76dB at 100kHz Pre-drilled external mounting flanges Ø5.2 mm Zinc plated mild steel M3.5 fixing screws Can be used up to 250 C without any adverse effects to the material or its structure PCB mounting guides dimension includes flanges Body Wall Thickness 114 35 30 89 1.5 517-3709 140 64 30 115 1.5 517-3715 140 64 55 115 1.5 517-3737 140 90 55 115 1.5 517-3721 150 100 36 120 2 517-3743 169 102 77 140 2 517-3759 185 127 76 166 2 517-3765 202 121 55 172 2 517-3771 202 121 105 172 2 517-3793 2 146 56 222 2 517-3800 EMI/RFI - IP66 Diecast aluminium alloy (LM24, BS1490) 3mm thick lid incorporates a neoprene, self-adhesive backed seal which, with stainless steel screws, provides protection to IP66 Stainless steel M3.5 x 16mm fixing screws The temature range for the seal is -34 C to +80 C, the box however can withstand a temature of upto 250 C These boxes are taed which makes them unsuitable for stacking 89 30 517-3709 unit 1+ 18 30 12+ 16 50 25+ 15 70 114 30 517-3715 unit 1+ 19 30 12+ 17 40 25+ 16 60 114 55 517-3737 unit 1+ 22 40 12+ 20 20 25+ 19 30 114 55 517-3721 unit 1+ 24 00 12+ 21 60 25+ 20 70 120 36 517-3743 unit 1+ 37 50 12+ 33 80 25+ 32 30 140 77 517-3759 unit 1+ 00 12+ 46 70 25+ 44 60 165 76 517-3765 unit 1+ 00 12+ 46 90 25+ 44 90 171 55 517-3771 unit 1+ 37 50 12+ 33 80 25+ 32 30 171 105 517-3793 unit 1+ 53 00 12+ 47 60 25+ 45 50 222 56 517-3800 unit 1+ 53 00 12+ 47 60 25+ 45 50 Wall Thickness PCB Mounting Guides 60 55 30 1.6 Yes 517-3513 80 55 25 1.6 Yes 517-4421 89 35 30 1.6 No 517-3507 114 64 55 1.6 No 517-3484 114 89 55 1.6 No 517-3462 120 100 35 2.1 Yes 517-39 140 100 75 1.9 Yes 517-3456 165 127 75 1.9 Yes 517-3490 171 121 55 1.9 No 517-3478 171 121 106 1.9 No 517-3434 1210 OM = Order Multiple Indicates more pricing available online

ORDERLINE 65 6865 3433 Wall Thickness PCB Mounting Guides 114 64 30 1.6 No 517-4409 222 146 57 1.9 No 517-4459 222 146 106 1.9 No 517-4465 250 250 100 2.5 Yes 517-3428 275 175 65 1.9 Yes 517-3440 EMI/RFI - IP65, Flanged Diecast aluminium alloy (LM24,BS1490) Lid with lip ensures EMI/RFI screening better than 40dB at 1.0MHz and 76db at 100kHz The temature range for the seal is -34 C to +80 C, the box however can withstand a temature of upto 250 C 3mm lids incorporate neoprene self-adhesive backed seal and stainless steel screws for IP66 protection Pre-drilled external mounting flanges and built in PCB guides Wall thickness 1.6mm PCB Mounting Guides Yes Fixing Centres 89 35 30 101.8 517-4106 114 64 30 126.9 x 30 517-4128 114 64 55 127.2 x 30 517-4099 114 89 55 127 x 50 517-4112 High Temature with Optional Seal 60 30 517-3513 unit 1+ 11 20 12+ 10 40 25+ 9 90 80 25 517-4421 unit 1+ 17 40 12+ 16 10 25+ 15 40 89 30 517-3507 unit 1+ 12 20 12+ 11 30 25+ 10 80 114 30 517-4409 unit 1+ 12 50 12+ 11 60 25+ 11 00 114 55 517-3484 unit 1+ 17 60 12+ 16 30 25+ 15 50 114 55 517-3462 unit 1+ 22 00 12+ 20 20 25+ 19 40 120 35 517-39 unit 1+ 16 90 12+ 15 40 25+ 14 80 140 75 517-3456 unit 1+ 39 30 12+ 35 80 25+ 34 30 165 75 517-3490 unit 1+ 45 50 12+ 41 40 25+ 39 60 171 55 517-3478 unit 1+ 21 10 12+ 19 50 25+ 18 70 171 106 517-3434 unit 1+ 42 60 12+ 38 80 25+ 37 10 222 57 517-4459 unit 1+ 29 00 12+ 26 70 25+ 25 50 222 106 517-4465 unit 1+ 53 00 12+ 48 30 25+ 46 20 250 100 517-3428 unit 1+ 65 50 12+ 59 00 25+ 56 50 275 65 517-3440 unit 1+ 78 00 12+ 71 00 25+ 68 00 89 30 517-4106 unit 1+ 23 10 12+ 21 00 25+ 20 00 114 30 517-4128 unit 1+ 33 00 12+ 30 00 25+ 28 70 114 55 517-4099 unit 1+ 26 50 12+ 24 20 25+ 23 10 114 55 517-4112 unit 1+ 26 30 12+ 23 90 25+ 22 90 Diecast Boxes Diecast box with close fitting lid held by M3 screws into tapped holes in body Easily drilled and machined Internal 1.5 mm slots for holding PCBs Can withstand tematures of up to 260 C (without Seal) includes Lid thickness of 4 mm Optional Seals For IP65 rating an optional neoprene gasket/seal is required, 1.5 mm thick Optional Wall Mounting Kit Wall mounting plates attach to lid, screws supplied, fits all sizes Wall Thickness 1.8 mm PCB Mounting Guides Yes 50 50 31 226-4076 unit 1+ 7 25 15+ 6 65 50+ 6 45 100 50 25 226-4149 unit 1+ 8 95 15+ 8 00 50+ 7 35 112 62 31 226-4133 unit 1+ 11 10 15+ 10 30 50+ 9 85 120 65 40 226-4127 unit 1+ 16 00 15+ 14 90 50+ 14 20 121 95 61 226-4111 unit 1+ 17 90 15+ 16 70 50+ 16 00 150 80 50 226-4098 unit 1+ 17 10 15+ 15 90 50+ 15 20 190 110 60 226-4082 unit 1+ 24 10 15+ 22 40 50+ 21 50 Description IP65 Seal (L101 x W50 box) 226-4155 unit 1+ 2 30 15+ 2 16 50+ 2 09 IP65 Seal (L112 x W62 box) 226-4199 unit 1+ 2 67 15+ 2 48 50+ 2 36 IP65 Seal (L120 x W66 box) 226-4183 unit 1+ 2 30 15+ 2 14 50+ 2 05 IP65 Seal (L1 x W82 box) 226-4177 unit 1+ 2 71 15+ 2 54 50+ 2 41 IP65 Seal (L192 x W112 box) 226-4161 unit 1+ 3 77 15+ 3 53 50+ 3 35 Wall Mounting Kit 226-4206 1 kit 1+ 3 73 15+ 3 51 50+ 3 40 Natural Finish Die Cast Aluminium Boxes IP67 Aluminium Shielded Boxes Wall mounting holes and fixing screws are outside the sealing area for true seal protection M4 countersunk stainless screws are included to secure the cover and the body Supplied with a continuous silicone gasket to meet IP67 rating and a conductive gasket for EMI shielding For Black painted versions see 700-4113 etc. IP Rating Aluminium alloy IP67 Watertight, IP65 Diecast Enclosure Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the imeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 C (-80 to +450 F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1 2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene O rings (included) Designed to meet IP65 Diecast Aluminium Wall Thickness 2 mm IP Rating IP65 Manu. Part No. 1590WS 111 82 44 364-2269 1590WP1 153 82 50 364-2275 1590WD 188 120 56 364-2281 1590WT 121 80 59 364-2304 1590WU 120 120 59 364-2326 1590WF 188 188 67 364-2332 1590WE 188 120 82 364-2348 1590WV 120 120 94 364-2354 Thick Wall Diecast Enclosure, IP65 96 96 45 700-4080 unit 1+ 22 00 12+ 20 00 25+ 18 70 96 96 67 700-4084 unit 1+ 23 50 12+ 21 40 25+ 20 00 192 96 45 700-4093 unit 1+ 35 70 12+ 32 50 25+ 30 40 192 96 67 700-4096 unit 1+ 38 80 12+ 35 30 25+ 32 90 274 173 66 700-4090 unit 1+ 69 50 12+ 63 50 25+ 59 00 274 173 100 700-4100 unit 1+ 78 00 12+ 71 00 25+ 66 50 150 100 50 700-4103 unit 1+ 32 20 12+ 29 30 25+ 27 40 150 100 75 700-4107 unit 1+ 38 00 12+ 34 60 25+ 32 30 200 150 50 700-4116 unit 1+ 58 50 12+ 53 00 25+ 49 70 200 150 75 700-4119 unit 1+ 64 50 12+ 59 00 25+ 55 00 Description Mounting bracket 703-1290 1 kit 1+ 5 80 100+ 4 04 Manu. Part No. 1590WS 364-2269 unit 1+ 21 90 15+ 20 10 50+ 19 30 1590WP1 364-2275 unit 1+ 21 50 15+ 19 80 50+ 19 00 1590WD 364-2281 unit 1+ 31 00 15+ 28 60 50+ 27 40 1590WT 364-2304 unit 1+ 17 90 15+ 16 40 50+ 15 70 1590WU 364-2326 unit 1+ 26 00 15+ 24 00 50+ 23 00 1590WF 364-2332 unit 1+ 41 30 15+ 38 00 50+ 36 40 1590WE 364-2348 unit 1+ 33 00 15+ 30 40 50+ 29 10 1590WV 364-2354 unit 1+ 28 20 15+ 26 00 50+ 24 90 Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Two piece tongue & groove construction with a one piece neoprene gasket provides protection against dust and water Ideal for repetitive opening and closing Four recessed stainless steel machine screws secure lid into factory tapped holes Easy to wall mount using through box - blind hole construction, outside of gasket protection Lid screws are self captivating (lid holes are threaded with the first installation of lid screws) Designed to meet IP65 Note: overall height includes lid. Visit our website for additional price information and exciting promotions 1211

Lid Shelves Lid Earth Point Manu. Part No. 80 12 No No 1590Z110 343-9417 80 12 Yes No 1590Z100 343-9401 120 20 Yes Yes 1590Z119 381-5063 125 15 Yes No 1590Z120 343-9423 160 20 Yes Yes 1590Z160 343-9467 175 12 No No 1590Z130 343-9439 175 20 No Yes 1590Z135 343-9445 221 20 Yes No 1590Z150 343-9451 230 20 Yes Yes 1590Z231 343-9489 160 20 Yes Yes 1590Z162 381-5079 360 20 Yes Yes 1590Z166 493-6240 IP65 With PCB Slots Sandblasted finish with 3mm wall thickness Neoprene gasket for IP65 protection Temature range; -40 C to +100 C Four recessed screws secure lid into tapped holes Slots provided for mounting PCBs DIN rail can be fixed to the base Note: DIN rail needs to be purchased seately and cut to required length. Sealed DIN Type, Diecast Boxes Cases with IP65 splash-proof cover and neoprane gasket Suitable for mounting DIN Rail BS5584: 1978 (DIN 46 277-3, EN 50.22) and allows standard 22.5mm module cases to be fitted in the following quantities 80 75 343-9417 unit 1+ 25 70 12+ 23 70 25+ 22 70 80 76 343-9401 unit 1+ 25 00 12+ 23 00 25+ 22 00 120 122 80 381-5063 unit 1+ 56 50 12+ 00 25+ 49 90 125 80 58 343-9423 unit 1+ 37 80 12+ 34 80 25+ 33 30 160 160 90 343-9467 unit 1+ 74 50 12+ 68 50 25+ 65 50 175 80 343-9439 unit 1+ 38 20 12+ 35 10 25+ 33 60 175 80 60 343-9445 unit 1+ 39 80 12+ 36 60 25+ 35 00 221 121 80 343-9451 unit 1+ 66 50 12+ 61 00 25+ 58 50 230 200 112 343-9489 unit 1+ 137 50 12+ 126 50 25+ 121 00 160 160 90 381-5079 unit 1+ 100 00 12+ 92 00 25+ 88 00 360 160 90 a493-6240 unit 1+ 138 00 12+ 135 00 25+ 131 00 61 75 122 282-1196 unit 1+ 23 90 12+ 22 50 25+ 21 50 75 75 122 282-1203 unit 1+ 20 20 12+ 19 00 25+ 18 20 61 87 87 282-11 unit 1+ 18 40 12+ 17 40 25+ 16 60 61 87 2 282-1247 unit 1+ 34 00 12+ 32 00 25+ 30 60 75 87 2 282-1253 unit 1+ 36 00 12+ 33 90 25+ 32 50 61 102 102 282-1168 unit 1+ 20 20 12+ 19 00 25+ 18 20 81 102 102 282-1180 unit 1+ 23 80 12+ 22 40 25+ 21 50 61 102 202 282-1219 unit 1+ 29 60 12+ 27 90 25+ 26 60 81 102 202 282-1225 unit 1+ 34 70 12+ 32 60 25+ 31 30 91 127 262 282-1269 unit 1+ 60 00 12+ 56 50 25+ 54 00 133 133 91 434-9898 unit 1+ 45 10 12+ 42 40 25+ 40 50 156 106 81 434-9882 unit 1+ 32 00 12+ 30 10 25+ 28 80 IP54 Diecast Enclosures Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Lap joint construction provides protection against dust and splashing water, also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD & 1590E, 8 in 1590F) 6-32 x 1 2 in. stainless steel machine screws secure lid into factory tapped holes Designed to meet IP54 Diecast Enclosure - Flanged Lid, IP54 Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Lap joint construction provides protection against access of dust and splashing water as well as offering RF shielding Countersunk lids add 4mm to the height and are secured by 6-32 x 1 2" Phillips countersunk screws (included). Vibra smooth surface finish Flanged Lids allow for wall or shelf mounting excludes flanges ON-LINE 50 50 27 343-9495 unit 1+ 10 80 15+ 9 95 50+ 9 50 38 27 343-9502 unit 1+ 9 25 15+ 8 55 50+ 8 25 92 38 27 343-9518 unit 1+ 10 50 15+ 9 65 50+ 9 25 111 59 27 343-94 unit 1+ 12 00 15+ 11 10 50+ 10 60 119 94 30 343-9546 unit 1+ 17 80 15+ 16 40 50+ 15 70 188 119 33 343-95 unit 1+ 25 20 15+ 23 20 50+ 22 20 121 66 36 343-9568 unit 1+ 16 30 15+ 15 00 50+ 14 40 110 82 40 343-9574 unit 1+ 15 80 15+ 14 50 50+ 13 90 145 95 45 343-9580 unit 1+ 18 40 15+ 16 90 50+ 16 10 153 82 46 343-9596 unit 1+ 19 00 15+ 17 50 50+ 16 80 187 119 343-9603 unit 1+ 28 60 15+ 26 40 50+ 25 20 120 94 343-9619 unit 1+ 16 30 15+ 15 00 50+ 14 40 120 80 55 343-9625 unit 1+ 19 10 15+ 17 70 50+ 16 90 120 120 55 343-9631 unit 1+ 23 90 15+ 22 00 50+ 21 00 188 188 64 343-9647 unit 1+ 40 50 15+ 37 20 50+ 35 70 125 125 75 343-9653 unit 1+ 31 70 15+ 29 20 50+ 28 00 188 119 78 343-9669 unit 1+ 35 90 15+ 33 10 50+ 31 70 120 120 90 343-9675 unit 1+ 27 80 15+ 25 70 50+ 24 60 192 111 57 415-2688 unit 1+ 28 60 15+ 26 40 50+ 25 30 50 50 27 343-9681 unit 1+ 11 10 15+ 10 30 50+ 9 85 92 38 27 343-9704 unit 1+ 9 95 15+ 9 20 50+ 8 80 111 59 27 343-9710 unit 1+ 13 20 15+ 12 20 50+ 11 60 119 94 30 343-9726 unit 1+ 14 70 15+ 13 60 50+ 13 00 188 119 33 343-9732 unit 1+ 30 70 15+ 28 30 50+ 27 10 121 66 36 343-9748 unit 1+ 16 60 15+ 15 20 50+ 14 60 110 82 40 343-9760 unit 1+ 16 20 15+ 14 90 50+ 14 20 153 82 46 343-9776 unit 1+ 18 70 15+ 17 20 50+ 16 50 187 119 343-9782 unit 1+ 30 30 15+ 27 80 50+ 26 70 120 94 343-9798 unit 1+ 16 30 15+ 15 10 50+ 14 40 120 80 55 343-9805 unit 1+ 15 40 15+ 14 20 50+ 13 60 120 120 55 343-9827 unit 1+ 25 10 15+ 23 10 50+ 22 10 188 188 64 343-9833 unit 1+ 37 60 15+ 34 60 50+ 33 20 188 119 78 343-9849 unit 1+ 29 20 15+ 26 90 50+ 25 80 120 120 90 343-9855 unit 1+ 25 70 15+ 23 70 50+ 22 70 Selection Guide Max DIN Rail No. of 22.5mm Modules 229-0334 83 3 229-0362 134 5 229-0356 156 6 229-0340 218 9 282-1102 0 (Zero) 0 (Zero) Natural Finish Wall Thickness 3.5 mm 106 106 71 282-1102 unit 1+ 24 20 15+ 22 60 50+ 21 60 142 117 71 229-0334 unit 1+ 53 00 15+ 49 30 50+ 47 20 167 142 81 229-0362 unit 1+ 55 00 15+ 51 00 50+ 49 00 192 167 96 229-0356 unit 1+ 64 00 15+ 59 50 50+ 57 00 254 219 102 229-0340 unit 1+ 88 00 15+ 82 00 50+ 78 50 Thin Wall Diecast Enclosure, IP54 Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC formance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting.5 38 27 343-9861 92 38 27 343-9877 111 60 27 343-9883 120 95 30 343-9899 145 95 45 343-9906 120 95 53 343-9912 188 120 53 343-9928 188 120 78 343-9940 Manu. Part No. 11451PSLA 343-9861 unit 1+ 6 30 15+ 5 80 50+ 5 60 27969PSLA 343-9877 unit 1+ 7 30 15+ 6 75 50+ 6 45 27134PSLA 343-9883 unit 1+ 8 80 15+ 8 00 50+ 7 70 29830PSLA 343-9899 unit 1+ 14 00 15+ 12 90 50+ 12 40 1212 OM = Order Multiple Indicates more pricing available online a New product to range

ORDERLINE 65 6865 3433 Manu. Part No. 10758PSLA 343-9906 unit 1+ 16 40 15+ 15 10 50+ 14 50 26908PSLA 343-9912 unit 1+ 15 50 15+ 14 30 50+ 13 70 26827PSLA 343-9928 unit 1+ 19 80 15+ 18 30 50+ 17 50 11130PSLA 343-9934 unit 1+ 22 90 15+ 21 20 50+ 20 20 26357PSLA 343-9940 unit 1+ 30 30 15+ 27 90 50+ 26 70 Standard Diecast Boxes Die-cast self-colour aluminium boxes with close fitting lipped lids that provide EMI/RFI screening, typically better than 40dB at 10MHz and 76dB at 100 khz. Lids are secured by countersunk screws. Some types incorporate moulded-in internal PCB guides. Selection Guide and Dimensions Type Wall thickness PCB Guides stock no. 1 60 55 30 1 6 Yes 517-3399 2 80 55 25 1 6 Yes 517-3377 3 89 35 30 1 6 No 517-4443 4 114 64 30 1 6 No 517-3276 5 114 64 55 1 6 No 517-3298 6 114 89 55 1 6 No 517-3333 7 120 100 35 2 1 Yes 517-3327 8 140 100 75 1 9 Yes 517-3361 9 165 127 75 1 9 Yes 517-3383 10 171 121 55 1 9 No 517-3355 11 171 121 106 1 9 No 517-3412 12 222 146 55 1 9 No 517-3260 13 222 146 106 1 9 No 517-4437 14 250 250 100 2 5 Yes 517-3311 15 275 175 65 1 9 Yes 517-3305 Description 60 x 55 x 30 mm 517-3399 unit 1+ 6 75 15+ 6 30 50+ 6 00 80 x 55 x 25 mm 517-3377 unit 1+ 8 05 15+ 7 45 50+ 7 15 89 x 35 x 30 mm 517-4443 unit 1+ 5 30 15+ 4 95 50+ 4 74 114 x 64 x 30 mm 517-3276 unit 1+ 9 95 15+ 9 25 50+ 8 85 114 x 64 x 55 mm 517-3298 unit 1+ 10 20 15+ 9 40 50+ 8 95 114 x 89 x 55 mm 517-3333 unit 1+ 14 20 15+ 13 10 50+ 12 50 120 x 100 x 35 mm 517-3327 unit 1+ 15 70 15+ 14 30 50+ 13 70 140 x 100 x 75 mm 517-3361 unit 1+ 21 20 15+ 19 30 50+ 18 40 165 x 127 x 75 mm 517-3383 unit 1+ 36 20 15+ 32 90 50+ 31 50 171 x 121 x 55 mm 517-3355 unit 1+ 21 20 15+ 19 30 50+ 18 40 171 x 121 x 106 mm 517-3412 unit 1+ 29 40 15+ 27 00 50+ 25 90 222 x 146 x 55 mm 517-3260 unit 1+ 29 50 15+ 26 80 50+ 25 70 222 x 146 x 106 mm 517-4437 unit 1+ 43 80 15+ 39 90 50+ 38 20 250 x 250 x 100 mm 517-3311 unit 1+ 26 40 15+ 23 90 50+ 22 90 275 x 175 x 65 mm 517-3305 unit 1+ 59 00 15+ 53 50 50+ 51 50 Painted Die Cast Aluminium Boxes IP67 Aluminium Shielded Boxes Wall mounting holes and fixing screws are outside the sealing area for true seal protection M4 countersunk stainless screws are included to secure the cover and the body Supplied with a continuous silicone gasket to meet IP67 rating and a conductive gasket for EMI shielding surfaces have black painted finish IP Rating Black IP67 96 96 45 700-4113 unit 1+ 28 00 12+ 25 40 25+ 23 80 96 96 67 700-4122 unit 1+ 30 00 12+ 27 30 25+ 25 50 192 96 45 700-4125 unit 1+ 43 90 12+ 40 00 25+ 37 30 192 96 67 700-4129 unit 1+ 48 50 12+ 44 20 25+ 41 30 274 173 66 700-4138 unit 1+ 85 00 12+ 77 50 25+ 72 50 274 173 100 700-4131 unit 1+ 94 50 12+ 86 00 25+ 80 00 150 100 50 700-4135 unit 1+ 40 40 12+ 36 80 25+ 34 30 150 100 75 700-4144 unit 1+ 47 80 12+ 43 50 25+ 40 60 200 150 50 700-4147 unit 1+ 71 50 12+ 65 00 25+ 60 50 200 150 75 700-4141 unit 1+ 79 00 12+ 72 00 25+ 67 00 Description Mounting bracket 703-1294 1 kit 1+ 9 10 100+ 6 35 EMI/RFI Screened - Powder Coated Diecast aluminium alloy (LM2, BS1490) EMI/RFI Screened Stock nos. 517-3670, 517-3686, 517-3591, 517-3636, 517-3557, 517-3541, 517-3642 and 517-4083 have internal guide slots to allow the interior to be subdivided by screens, dividers, PCBs or component mounting boards Countersunk stainless steel M3.5 fixing screws Minimum wall thickness 1.6 mm 60 55 30 Light grey 517-3670 80 55 25 Light grey 517-3686 89 35 30 Light grey 517-3692 114 64 30 Light grey 517-3664 114 64 55 Light grey 517-3608 114 89 55 Light grey 517-3658 120 100 35 Light grey 517-3591 140 100 75 Light grey 517-3642 165 127 75 Light grey 517-3636 171 121 55 Light grey 517-3614 171 121 106 Light grey 517-3585 222 146 55 Light grey 517-3579 222 146 106 Light grey 517-3535 250 250 100 Light grey 517-3557 275 175 65 Light grey 517-3541 89 35 30 Black 517-4027 114 64 30 Black 517-4033 114 64 55 Black 517-4049 114 89 55 Black 517-4061 140 100 75 Black 517-4083 171 121 55 Black 517-4055 Body Colour EMI/RFI Screened Stove Finish Diecast aluminium alloy (LM2, BS1490) Stove Finish - is a coarse textured acrylic stove finish Close fitting lids with lip secured by stainless steel M3.5 countersunk screws Minimum wall thickness 1.6 mm 60 Light grey 517-3670 unit 1+ 12 30 12+ 11 40 25+ 10 90 80 Light grey 517-3686 unit 1+ 11 90 12+ 11 10 25+ 10 70 89 Light grey 517-3692 unit 1+ 12 30 12+ 11 40 25+ 10 90 114 Light grey 517-3664 unit 1+ 14 60 12+ 13 60 25+ 12 90 114 Light grey 517-3608 unit 1+ 16 90 12+ 15 70 25+ 15 00 114 Light grey 517-3658 unit 1+ 19 40 12+ 18 10 25+ 17 30 120 Light grey 517-3591 unit 1+ 25 30 12+ 23 30 25+ 22 30 140 Light grey 517-3642 unit 1+ 33 40 12+ 30 70 25+ 29 90 165 Light grey 517-3636 unit 1+ 36 40 12+ 33 50 25+ 32 10 171 Light grey 517-3614 unit 1+ 26 40 12+ 24 30 25+ 23 20 171 Light grey 517-3585 unit 1+ 37 10 12+ 34 10 25+ 32 70 222 Light grey 517-3579 unit 1+ 38 20 12+ 35 10 25+ 33 60 222 Light grey 517-3535 unit 1+ 46 60 12+ 42 80 25+ 41 00 250 Light grey 517-3557 unit 1+ 70 50 12+ 65 00 25+ 62 00 275 Light grey 517-3541 unit 1+ 61 50 12+ 56 50 25+ 54 00 89 Black 517-4027 unit 1+ 12 40 12+ 11 50 25+ 11 00 114 Black 517-4033 unit 1+ 15 30 12+ 14 20 25+ 13 60 114 Black 517-4049 unit 1+ 17 60 12+ 16 40 25+ 15 70 114 Black 517-4061 unit 1+ 29 70 12+ 27 70 25+ 26 50 140 Black 517-4083 unit 1+ 32 00 12+ 29 40 25+ 28 20 171 Black 517-4055 unit 1+ 26 70 12+ 24 60 25+ 23 50 Wall Thickness 1.6 mm 89 35 30 Light Grey 517-3888 114 64 30 Light Grey 517-3866 114 64 55 Light Grey 517-3822 114 89 55 Light Grey 517-3816 140 102 76 Light Grey 517-3872 165 123 76 Light Grey 517-3939 171 121 55 Light Grey 517-3850 222 146 55 Light Grey 517-3838 222 146 106 Light Grey 517-3894 250 250 100 Light Grey 517-3917 89 35 30 Black 517-3945 115 64 30 Black 517-3951 115 65 55 Black 517-3967 120 100 35 Black 517-4005 165 127 76 Black 517-3995 172 121 55 Black 517-3973 222 146 55 Black 621-4968 250 250 100 Black 517-4011 275 175 65 Black 517-3989 Light Grey 517-3888 unit 1+ 10 60 12+ 9 65 25+ 9 25 Light Grey 517-3866 unit 1+ 11 90 12+ 10 90 25+ 10 40 New products available online every week 1213

ON-LINE Light Grey 517-3822 unit 1+ 12 90 12+ 11 80 25+ 11 30 Light Grey 517-3816 unit 1+ 25 70 12+ 23 60 25+ 22 70 Light Grey 517-3872 unit 1+ 33 50 12+ 31 40 25+ 30 10 Light Grey 517-3939 unit 1+ 24 40 12+ 23 00 25+ 22 00 Light Grey 517-3850 unit 1+ 23 30 12+ 21 40 25+ 20 50 Light Grey 517-3838 unit 1+ 28 60 12+ 26 20 25+ 25 10 Light Grey 517-3894 unit 1+ 27 70 12+ 26 10 25+ 25 00 Light Grey 517-3917 unit 1+ 48 00 12+ 45 50 25+ 44 10 Black 517-3945 unit 1+ 9 30 10+ 8 55 50+ 8 20 Black 517-3951 unit 1+ 11 70 10+ 10 80 50+ 10 30 Black 517-3967 unit 1+ 15 50 10+ 14 20 50+ 13 60 Black 517-4005 unit 1+ 27 60 10+ 25 40 50+ 24 30 Black 517-3995 unit 1+ 39 60 10+ 36 30 50+ 34 80 Black 517-3973 unit 1+ 23 50 10+ 21 80 50+ 20 80 Black 621-4968 unit 1+ 34 00 12+ 30 90 25+ 29 60 Black 517-4011 unit 1+ 93 00 10+ 85 00 50+ 81 50 Black 517-3989 unit 1+ 62 50 10+ 57 00 50+ 54 50 RFI Shielded Boxes Baked enamel heavy-duty boxes with overlapping tongue and groove to provide a high level of RFI screening Neoprene sealing gasket provides protection to IP66 Internal mounts for PCBs, earth tags etc (supplied with cop plated screws) Lid to box fixing screws and mounting holes are outside gasket area Temature range of -40 to +80 C Body colour grey (RAL7032) GA Series Enclosures Powder coated cast aluminium enclosure prepared with additional drilled and tapped holes for securing support rails or mounting plates Lid secured by captive screws Oil and petrol resistant neoprene cord seal Variable wall mounting options, either with additional wall mounting brackets or directly through provided ature outside of the seal Body colour grey (RAL 7001) Mounting plates available separately (see accessories) Grey (RAL7001) IP66 Rated IP66 ingress protection Cover seal temature stability -40 to +100 C DIN rail mounting point (except 506-902, 501-834, 506-918, 501-840 and 506-924) Mounting point thread size M4 for boxes up to 175 x 80 x 57 and M6 for boxes 122 x 120 x 80 upwards 128 126 60 243-3676 unit 1+ 102 50 12+ 96 50 25+ 92 00 128 126 90 243-3682 unit 1+ 93 00 12+ 88 50 25+ 84 50 129 84 67 202-2030 unit 1+ 64 00 12+ 60 50 25+ 58 00 166 166 60 243-3698 unit 1+ 113 00 12+ 106 50 25+ 102 00 166 166 100 243-3711 unit 1+ 125 50 12+ 118 00 25+ 113 00 179 84 67 202-2046 unit 1+ 64 50 12+ 60 50 25+ 58 00 226 126 60 202-20 unit 1+ 119 50 12+ 112 50 25+ 107 50 226 126 90 202-2074 unit 1+ 159 50 12+ 150 00 25+ 143 50 266 166 60 243-3727 unit 1+ 160 50 12+ 151 00 25+ 144 50 266 166 100 202-2080 unit 1+ 230 00 12+ 215 00 25+ 205 00 125 80 57 a457-1247 unit 1+ 46 30 12+ 44 00 25+ 42 20 250 80 57 a478-0744 unit 1+ 81 00 12+ 79 00 25+ 77 00 260 160 90 a457-1275 unit 1+ 140 00 12+ 133 00 25+ 127 00 200 230 110 a478-0750 unit 1+ 228 00 12+ 222 00 25+ 217 00 Wall Thickness 50 45 30 2.5 506-902 64 58 34 3.5 501-834 80 75 57 4 507-040 98 64 34 3 506-918 100 100 80 4 385-806 122 120 80 5 507-062 122 120 90 5 222-698 125 80 57 4 509-305 140 140 90 4.5 385-812 150 64 34 4 501-840 160 100 80 4 385-828 160 160 90 5 507-078 175 80 57 4.5 507-056 180 180 100 4.5 385-834 200 100 80 4 385-840 200 140 90 4.5 385-856 220 120 80 4.5 509-125 220 120 90 5 222-705 1214 OM = Order Multiple Indicates more pricing available online a New product to range Wall Thickness 230 100 110 5 222-711 230 200 110 5 501-856 230 200 180 5 222-727 250 80 4 506-924 260 160 90 5 507-084 280 180 100 4.5 385-862 280 230 110 4.5 222-733 330 230 110 5.5 506-930 330 230 180 5.5 222-749 360 120 80 4.5 506-946 360 160 90 4.5 222-755 400 230 110 4 192-7877 400 230 224 4 192-7883 400 310 110 5 222-761 400 310 180 4 192-7899 560 160 90 5.5 506-9 600 230 110 4 192-7912 600 310 110 4 192-7928 Agate Grey (RAL 7038) IP65 Rated, Contoured Lid IP65 ingress protection by use of polyurethane seal with universal tongue and groove seal system Cover seal temature stability -40 to +100 C DIN rail mounting point Lid and base joined using captive stainless steel lid screws Wall thickness 3mm 50 30 506-902 unit 1+ 19 30 12+ 18 20 25+ 17 40 64 34 501-834 unit 1+ 24 70 12+ 23 00 25+ 22 00 80 57 507-040 unit 1+ 44 20 12+ 41 20 25+ 39 40 98 34 506-918 unit 1+ 27 90 12+ 26 20 25+ 25 20 100 80 385-806 unit 1+ 76 50 12+ 71 00 25+ 68 00 122 80 507-062 unit 1+ 79 00 12+ 74 50 25+ 71 00 122 90 222-698 unit 1+ 103 50 12+ 96 50 25+ 92 00 125 57 509-305 unit 1+ 53 50 12+ 49 80 25+ 47 70 140 90 385-812 unit 1+ 93 50 12+ 87 00 25+ 83 00 150 34 501-840 unit 1+ 40 20 12+ 37 40 25+ 35 80 160 80 385-828 unit 1+ 90 00 12+ 83 50 25+ 80 00 160 90 507-078 unit 1+ 102 50 12+ 96 50 25+ 92 00 175 57 507-056 unit 1+ 53 00 12+ 49 40 25+ 47 30 180 100 385-834 unit 1+ 145 50 12+ 135 00 25+ 129 50 200 80 385-840 unit 1+ 97 50 12+ 90 50 25+ 86 50 200 90 385-856 unit 1+ 118 50 12+ 110 50 25+ 105 50 220 80 509-125 unit 1+ 113 00 12+ 106 00 25+ 102 00 220 90 222-705 unit 1+ 102 50 12+ 95 50 25+ 91 00 230 110 222-711 unit 1+ 164 00 12+ 1 50 25+ 146 00 230 110 501-856 unit 1+ 245 00 12+ 230 00 25+ 220 00 230 180 222-727 unit 1+ 330 00 12+ 310 00 25+ 295 00 250 506-924 unit 1+ 71 00 12+ 67 00 25+ 64 00 260 90 507-084 unit 1+ 157 00 12+ 147 50 25+ 141 50 280 100 385-862 unit 1+ 210 00 12+ 195 50 25+ 187 00 280 110 222-733 unit 1+ 300 00 12+ 280 00 25+ 265 00 330 110 506-930 unit 1+ 300 00 12+ 285 00 25+ 270 00 330 180 222-749 unit 1+ 375 00 12+ 350 00 25+ 335 00 360 80 506-946 unit 1+ 135 50 12+ 127 50 25+ 122 00 360 90 222-755 unit 1+ 164 00 12+ 154 50 25+ 147 50 400 110 192-7877 unit 1+ 405 00 12+ 380 00 25+ 365 00 400 224 192-7883 unit 1+ 470 00 12+ 440 00 25+ 420 00 400 110 222-761 unit 1+ 440 00 12+ 420 00 25+ 400 00 400 180 192-7899 unit 1+ 580 00 12+ 540 00 25+ 0 00 560 90 506-9 unit 1+ 255 00 12+ 240 00 25+ 230 00 600 110 192-7912 unit 1+ 510 00 12+ 480 00 25+ 460 00 600 110 192-7928 unit 1+ 690 00 12+ 650 00 25+ 620 00 100 100 60 193-9375 unit 1+ 60 00 12+ 56 50 25+ 54 00 140 140 70 193-9397 unit 1+ 72 00 12+ 67 50 25+ 64 50 160 100 60 193-9404 unit 1+ 62 00 12+ 58 50 25+ 56 00 180 140 70 193-9410 unit 1+ 89 00 12+ 83 50 25+ 80 00 200 100 60 193-9426 unit 1+ 66 50 12+ 62 50 25+ 59 50 200 200 70 193-9432 unit 1+ 115 00 12+ 108 00 25+ 103 50 220 140 70 193-9454 unit 1+ 104 50 12+ 98 50 25+ 94 00 160 120 80 a420-2402 unit 1+ 79 00 10+ 74 00 280 200 70 a420-2430 unit 1+ 151 00 10+ 142 00 My Account

ORDERLINE 65 6865 3433 IP66/IP67 Euronord Aluminium Enclosures The Euronord range of enclosures from Fibox are designed to house DIN-rail mounted terminal blocks and various types of sensors. The enclosure lid has a polyurethane sealing gasket, and can be easily sealed with a single 90 turn on the quicklock stainless steel screw. Grey polyester powder paint (RAL7001) Temature range -50 C to +80 C (continuous), -50 to +140 C (short term) Ingress protection (EN 609) IP66 / IP67 Impact resistance (EN 62262) IK08 RoHS Compliant and Halogen Free Standards: EN 62208:2003 (50298:1998). EN 60950. IP66 Coloured Aluminium Enclosures 66 60 46 a219-0155 unit 1+ 39 40 12+ 37 00 25+ 35 50 125 124 81 a219-0212 unit 1+ 128 00 12+ 120 00 25+ 115 00 222 125 81 a219-0228 unit 1+ 151 00 12+ 142 00 25+ 136 00 263 162 91 a219-0262 unit 1+ 211 00 12+ 198 00 25+ 190 00 Stainless steel captive lid screws IP66 ingress protection by use of polyurethane seal with universal tongue and groove seal system Cover seal temature stability -40 to +100 C Fastening threads in base and earth connection point within the box Note: Red = RAL3000, Green = RAL6011, Blue = RAL5009, Yellow = RAL1021, Orange = RAL2004 58 64 34 Green 251-8733 58 64 34 Orange 251-8777 100 100 80 Orange 251-8834 58 64 34 Red 251-8727 100 100 80 Red 251-8783 58 64 34 Yellow 251-8755 100 100 80 Yellow 251-8812 Green 251-8733 unit 1+ 24 40 12+ 22 70 25+ 21 70 Orange 251-8777 unit 1+ 20 70 12+ 19 30 25+ 18 50 Orange 251-8834 unit 1+ 50 12+ 49 60 25+ 47 50 Red 251-8727 unit 1+ 20 70 12+ 19 30 25+ 18 50 Red 251-8783 unit 1+ 50 12+ 49 60 25+ 47 50 Yellow 251-8755 unit 1+ 20 70 12+ 19 30 25+ 18 50 Yellow 251-8812 unit 1+ 61 00 12+ 57 50 25+ 55 00 IP65 Aluminium Flanged Enclosures Powder coated cast aluminium box with two external mounting holes of 4.4mm diameter Lid has integral rubber neoprene gasket providing protection to IP65 and 2 stainless steel screws Lid to box fixing screws outside gasket area Cover seal temature stability -40 to +100 C Base incorporates 2 x M4 brass earth screws 64 mm (RAL) Grey (RAL7001) 35 mm 115 212-7466 unit 1+ 34 80 12+ 32 40 25+ 31 00 186 212-7450 unit 1+ 50 50 12+ 47 10 25+ 45 10 Co-Axial In-Line Boxes BNC Die-cast Aluminium Module Case Cases with BNC connectors for construction of fully shielded in-line circuitry including attenuators, impedance matching networks and amplifiers Ideal for prototyping and shielding radiation sensitive components Internal solder turret terminals at each end connected to shield Aluminium cover with self tapping screws Cases are finished in a blue enamel paint Internal 38.1 mm Gender Internal Internal Size Socket/socket 35.1 28.7 31.0 25.5 B 168-5191 Plug/socket 35.1 28.7 31.0 25.5 B 168-08 Plug/socket 28.7 22.4 24.6 19.3 A 196-3356 Description Socket/Socket, B 168-5191 unit 1+ 49 20 10+ 45 75 25+ 44 32 Plug/Socket, B 168-08 unit 1+ 57 50 10+ 53 38 25+ 51 71 Plug/Socket, A 196-3356 unit 1+ 40 60 10+ 39 00 25+ 38 90 Many more leading brands from over 2,500 suppliers available online 1215