lck and leed Valves M, MD, M, MD and V3, V4 Series www.finelk.cm www.fitkgrup.cm
lck and leed Valves lck and leed Valves Maximum wrking pressure: psig (689 bar) Wrking temperature up t 85 F (454 ) with Graphite packing lur cded valve functin identificatin Every design is hydraulic pressure tested in accrdance and PI 598 with EN 66-. Every set is tested with nitrgen fr leak-tight perfrmance at psig Fire-tested design in accrdance with PI 67 and S 6755 part Flanged cnnectins cmply with NSI 6.5 RF and RTJ Pressure ratings in accrdance with NSI 6.34 all Valve Mdel Stp Pin Packing earing Seat all ck Nut Stainless Steel Handle lwut-prf Maximum wrking pressure is psig (689 bar). Wrking temperature are as fllws: PTFE: -65 F t 4 F (-54 t 4 ) PEEK: -65 F t 45 F (-54 t 3 ) ctuate at quarter-turn. Directinal stem flats shw pen r clsed psitin. ttm-laded stem prevents stem blwut and enhances system safety. High-strength stem bearing prvides smth actuatin and eliminates galling between valve stem and bdy. It may be required t adjust the packing during the service life f the valve. FINEOK ball valves are designed t be perated in a fully pen r fully clsed psitin. Needle Type Valve Mdel Gland ck Nut Packing Washer wer OS&Y Needle Type Valve Mdel ndized luminum Investment ase Yke lted nnet Nnrtating wer Set Screw ctuatr nnet Packing Stp Pin Set S crew Rlled Thread djustable Gland Flange Packing Gland ack Seat Design Maximum wrking pressure is psig (689 bar). Wrking temperature are as fllws: PTFE: -65 F t 45 F (-54 t 3 ) Graphite: -65 F t 85 F (-54 t 454 ) Tw-stem design: thread hardened upper stem and smth surface hardened lwer stem. Upper stem thread lubricant is islated frm system fluid. The nnrtating lwer stem, linearly instead f helical mvement, avids galling damage t the seat and tip, as well as reduces the ttal frictin area between the packing and the lwer stem. back seating seals in fully pen psitin. Panel munting is available as an ptin. Duble lck-pins enable steady and durable fastening f the handle. Handle with different clrs are available. Maximum wrking pressure is psig (689 bar). Wrking temperature are as fllws: PTFE: -65 F t 45 F (-54 t 3 ) Graphite: -65 F t 85 F (-54 t 454 ) Tw-stem design: thread hardened upper stem and smth surface hardened lwer stem. Upper stem thread lubricant is islated frm system fluid. The nnrtating lwer stem, linearly instead f helical mvement, avids galling damage t the seat and tip, as well as reduces the ttal frictin area between the packing and the lwer stem. lted bnnet enhance strength and reliability. ack seat design prvides secndary stem sealing and prevents stem blwut. djustable gland flange allws easy access t the packing gland and packing adjustment fr an effective stem seal. Investment case yke is frmed by precisin casting which enhances strength and perfect stem alignment. Tw handle pins make the handle fixed firmly and lastingly. Handle clrs indicate functins: Needle and OS&Y valves: K = Islate/lck RED = /leed all valves: YEOW = Islate/lck RED = /leed
3 lck and leed Valves lck and leed Valves 4 Standard Materials f nstructin Mnflange Single lck and leed Valves mpnent Stainless Steel dy Material arbn Steel Duplex Stainless Steel M Series Piping and instrument valves in ne bdy Material Grade/Specificatin Weight, space and cst savingver traditinal designs all Valve dy/end cnnectr Needle Type Glbe Valve OS&Y Needle Type Glbe Valve all Retainer Scket Seat Tip nnet Tip nnet Yke 36 SS, 36 SS /8 36 SS, 36 SS /479 36 SS, 36 SS/479 F/35 F5/8 S3879 Reinfrced PTFE, PEEK S3879 36 SS, 36 SS/479 S3879 36 SS, 36 SS/479 S3879 F8M/35 r 36 SS/8 Stainless steel is standard material, thers are available upn request. lwut-prf valve stems and needles mplete traceability f materials /4 female NPT standard vent with plug / female NPT standard utlet with plug lck: OS&Y leed: needle (ON) (RF) (RTJ) (RF) (RTJ) Pressure vs. Temperature re Size NSI ' all Valve mdule Needle and OS&Y Needle Type Valve 9/ 3.75 (95.) 4.75 (.7).38 (6.5).6 (66.5) 3.5 (8.5) Pressure (psig) 9 8 7 5 4-54 -65-8 PTFE Temperature ( ) 38 93 PEEK 49 Temperature ( F) Sur Gas Service/NE mpliant 4 4 6 689 6 55 48 44 345 75 7 38 69 5 Pressure (bar) Pressure (psig) Temperature ( ) -54 38 49 6 37 48 593 74 758 9 8 7 5 4 PTFE Standard Graphite -65 5 7 9 Temperature ( F) 689 6 55 48 44 345 76 7 38 69 Pressure (bar) (DN ) (DN 5) /.57 (4.) 9/ 9/ 9/.67 (67.9).67 (67.9) 5.5 (33.4) 4.6 (7.3) 5.3 (3.3) 5.5 (39.7) 5.88 (49.4) 6.5 (58.8) 6. (55.5) 8. (3.).75 (69.8) 3.5 (8.6) 3.75 (95.) 3. (79.) 4. (.6) 4.5 (4.3) 5.75 (46.) interface valves fr sur gas service are 6. (5.4) 4.75 (.7) available. Materials are selected in accrdance with NE MR75/ISO 556. ntact the authrized representative r FINEOK if any request. 9/.4 (6.5).4 (6.5) 8.5 (5.9).88 (73.4).88 (73.4) 9.5 (35.) 6.75 (7.5) Dimensins are fr reference nly and are subject t change.
5 lck and leed Valves lck and leed Valves 6 Mnflange Duble lck Valves MD Series Piping and instrument valves in ne bdy Weight, space and cst saving ver traditinal designs lwut-prf valve stems and needles mplete traceability f materials / female NPT standard utlet with plug Primary: OS&Y Secndary: needle (ON) Primary: needle Secndary: needle (NN) Mnflange Single lck Valve M Series Piping and instrument valves in ne bdy Weight, space and cst saving ver traditinal designs lwut-prf valve stems and needles mplete traceability f materials / female NPT standard utlet with plug lck: OS&Y (O) lck: needle (N) (RF) ' (RTJ) (RF) ' (RTJ) (RF) ' (RTJ) (RF) ' (RTJ) re Size NSI '.38 (6.5) re Size NSI ' 9/ 3.75 (95.) 4.75 (.7) 5.5 (33.4).6 (66.5) 3.5 (8.5) 9/ 3.75 (95.) 4.75 (.7).38 (6.5).6 (66.5) 3.5 (8.5).75 (69.8) 5.5 (33.4) (DN ) 9/ 4.6 (7.3) 5.3 (3.3) 5.5 (39.7) 3.5 (8.6) 3.75 (95.) (DN ) 9/ 4.6 (7.3) 5.3 (3.3).75 (69.8) 3.5 (8.6) 3. (79.) 5.5 (39.7) 3.75 (95.) (DN 5).57 (4.) 9/ 5.88 (49.4) 6.5 (58.8) 4. (.6) (DN 5).57 (4.) 9/ 5.88 (49.4) 6.5 (58.8) 3. (79.) 4. (.6) / 9/.67 (67.9).67 (67.9) 6. (55.5) 8. (3.) 4.5 (4.3) 5.75 (46.) / 9/ 6. (55.5) 4.5 (4.3) 6. (5.4) 4.75 (.7).67 (67.9).67 (67.9) 8. (3.) 5.75 (46.) 9/.4 (6.5).88 (73.4).4 (6.5).88 (73.4) 8.5 (5.9) 9.5 (35.) 6.75 (7.5) 9/.4 (6.5).4 (6.5) 6. (5.4) 8.5 (5.9) 4.75 (.7) Dimensins are fr reference nly and are subject t change..88 (73.4).88 (73.4) 9.5 (35.) 6.75 (7.5) Dimensins are fr reference nly and are subject t change.
7 lck and leed Valves lck and leed Valves 8 Mnflange Duble lck & leed Valves MD Series Piping and instrument valves in ne bdy Weight, space and cst saving ver traditinal designs lwut-prf valve stems and needles mplete traceability f materials /4 female NPT standard vent with plug / female NPT standard utlet with plug Primary: OS&Y Secndary: needle leed: needle (ONN) Flange Duble lck and leed Valves V3 Series: One piece frged bdy, minimize ptential leak pint Piping and instrument valves in ne design Weight, space and cst saving ver traditinal designs lwut-prf valve stems and needles mplete traceability f materials Primary: ball Secndary: ball leed: needle (N) (RF t RF Flange) ' (RTJ t RTJ Flange) (RF t NPT nnectin) ' (RTJ t NPT nnectin) (DN ) (DN 5) / re Size.57 (4.) NSI 9/ 9/ 9/ 9/ 9/ (RF) (RTJ).67 (67.9).4 (6.5) '.67 (67.9).4 (6.5) 3.75 (95.) 4.75 (.7) 5.5 (33.4) 4.6 (7.3) 5.3 (3.3) 5.5 (39.7) 5.88 (49.4) 6.5 (58.8) 6. (55.5) 8. (3.) 6. (5.4) 8.5 (5.9).38 (6.5).6 (66.5) 3.5 (8.5).75 (69.8) 3.5 (8.6) 3.75 (95.) 3. (79.) 4. (.6) 4.5 (4.3) 5.75 (46.) 4.75 (.7) (RF) (RTJ) (DN ) (DN 5) / re Size 3/8 (9.5) NSI 9/ 9/ 9/ 9/ 9/ 5.9 (.) 6.69 (7.) 5.9 (.) 6.69 (7.) 5.9 (.) 7.64 (94.) 7.64 (94.) 8.3 (4.) ' 5.9 (.) 6.69 (7.) 5.9 (.) 6.69 (7.) 5.9 (.) 7.64 (94.) 7.64 (94.) 8.3 (4.) 6.4 (6.8) 6.8 (73.) 7.99 (.9) 6.4 (6.8) 6.8 (73.) 7.99 (.9) 6.4 (6.8).3 (6.6).7 (7.8) 8.9 (6.) 9.89 (5.).5 (9.).4 (35.) 9.9 (3.9). (56.5). (34.8) 3.6 (345.4) ' 6.8 (73.) 7.99 (.9) 6.8 (73.) 7.99 (.9) 6.6 (67.9).3 (6.6).7 (7.8) 9.49 (4.) 9.89 (5.).5 (9.).4 (35.) 9.49 (4.).3 (6.6). (34.8) 3.6 (345.4) 3.75 (95.3) 4.75 (.7) 5.5 (33.4) 4.6 (7.3) 5.3 (3.3) 5.5 (39.7) 5.88 (49.4) 6.5 (58.8) 6. (55.4) 8. (3.) 6. (5.4) 8.5 (5.9) 9.5 (35.).38 (6.5).6 (66.5) 3.5 (8.6).75 (69.9) 3.5 (8.6) 3.75 (95.3) 3. (79.) 4. (.6) 4.5 (4.3) 5.75 (46.) 4.75 (.7) 6.75 (7.5).88 (73.4).88 (73.4) 9.5 (35.) 6.75 (7.5)
9 lck and leed Valves lck and leed Valves arge-bre lted Duble lck and leed Valves V4 Series mplementing the existing ne-piece range, flange t flange blted cnstructin D valves available in sizes frm / t. Designed accrding t SME SI 6.34 Weight, space and cst saving ver traditinal designs. mplete traceability f materials Injectin Duble lck & leed Valves Functin - injectin Injectin f chemicals and ther media int the prcess stream can be accmplished with this design. check valve is installed t prevent prcess fluid frm reaching the inlet injectin psitin. There is a.5" (3 mm) hle in the injectin nzzle rifice. The length f the injectin nzzle rifice can be manufactured t meet custmer requirements and needs t be specified. The injectin rifice can als be rtated. Injectin valves can be prvided in mst f the styles and ptins ffered fr the D ranges. FOW Hle 3 mm Dia. heck Valve Full-bre Series Reduced-bre Series Injectin Quill The injectin quill length () is manufactured t meet custmer requirements. The injectin nzzle is a 3 mm diameter hle (standard). Overall ength Overall ength Integral heck Valve This pppet type spring return valve has a FKM sft seal (standard). Sampling Duble lck & leed Valves Functin - sampling Dimensins Dimensins This design is develped t remve a sample directly frm prcess stream at full system pressure. The custmised sampling prbe extends frm the pipe flange cnnectin fr crrect sample remval. Sampling valves can be prvided withut a prbe and valves re Size NSI re Size NSI can be prvided in mst f the styles and ptins ffered fr the D ranges..7 (7). (79) (DN5) (5.4) 9/. (79).5 (9) 4.3 (364) 4.8 (377) / (5.4) 9/. (85).9 (3) 4.6 (37) 5.6 (396) 45 FOW / / (38.) 9/ 4. (36) 4.4 (367) 5. (384) 5.8 (4) / (38.) 9/ 4.3 (364) 4.6 (37) 5.4 (39) 6.3 (45) 8. (463) 5.4 (39) 5.7 (398) 3 8.7 (475) 5.7 (4) 6. (4) Sampling Prbe The sampling prbe length () is manufactured t meet custmer requirements. (5.8) 6.4 (46) (DN 8) (5.8) 6.9 (48) 9/ 8.9 (48) 9 7.4 (44) Dimensins are fr reference nly and are subject t change 9.7 (5)
lck and leed Valves Ordering Infrmatin SS V3 RF6 FNT8 V8 PS dy Material Series nfiguratin Inlet Type Inlet Size NSI Type Size NSI SS 6 S D5 36 SS 36 SS 5 F5 M MD M MD V3 Mnflange Single lck and leed Valves Mnflange Duble lck Mnflange Single lck Mnflange Duble lck and leed Flange Duble lck and leed Y re size is Std. 9.5 mm re size is Std. 4 mm re size is Std. mm Integral screwed-bnnet needle valve (primary blck) OS&Y blted-bnnet needle valve (primary blck) V3 V4 Series M MD M MD Series RF RF RJ RF Smth Flange (3. t 6.3 μm) RF Serrated Flange (6.3 t.5 μm) RTJ Flange 8 6 4 3 / " (DN5) " (DN) " (DN5) /"(DN4) " (DN5) E F 9 G FNT8 Same as inlet / Female NPT V4 arge-bre lted Duble lck and leed.optins f ball valve bre: 3/8 " (9.5 mm) bre (all prcess cnnectin sizes); / " (4 mm) bre (, /, r prcess cnnectins; select size DN5, DN4 r DN5) " ( mm) bre ( / r prcess cnnectins; select size DN4 r DN5) V4 V8 Type and Size /4 Female NPT with plug / Female NPT with plug Packing/Sealing Material P G PTFE PEEK Graphite Special pplicatin S N NE MR75 S applicatin Sampling IN applicatin Injectin