Needle Valves Catalog 4110-NV December 2010

Transcription

1 Needle Valves Catalog 4110-NV December 2010

2 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures as high as 1,200 F (649 C). non-rotating lower stem helps to extend packing life by removing rotation from the packing area. Stem packing below the threads isolates the thread lubricant from the flow, ensuring adequate lubrication regardless of the media. Features nion bonnet design ensures high integrity seal under severe service applications Packing below the power threads protects thread lubricants from media and isolates the lubricants from the media Dust seal in the packing nut protects stem threads from external contamination Stem swivel above the packing eliminates entrapment area and increases packing life Choice of Grafoil or PTFE packing Choice of or lunt stem types. lunt stem type helps combat wire draw which may occur when two phase flow is present (i.e. steam service) 316 stainless steel construction Wide variety of S Customary and SI ports Panel mountable 100% factory tested Materials of Construction Item # Description Material *1 ody STM 182, Type F316 2 onnet Nut STM 479, Type 316 *3 onnet STM 479, Type 316 *4 Lower Stem* STM 564, Type pper Stem STM 564, Type Stem Guide STM 581, Type all 440-C Stainless Steel *8 onnet Seal** Nickel-Chromium-Iron lloy 9 Packing Nut STM 479, Type 316 *10 Packing*** Grafoil *11 Packing Washer 316 Stainless Steel 12 Handle**** luminum 13 Handle Screw 316 Stainless Steel 14 Dust Seal***** Nylon 6/6 15 Locking Nut Stainless Steel * Wetted parts * Lower Stem material is STM 276 Type 316 with HT option ** Not required on 6 and 12 Series which have metal-to-metal seals *** Optional PTFE Packing is available **** Handle material is stainless steel with HT option ***** Dust Seal not available with HT option Lubrication: Molybdenum disulfide with soft metallic fillers Specifications Pressure Rating: 6000 psig (414 bar) CWP Temperature Rating: PTFE packing: -65 F to 450 F (-54 C to 232 C) Grafoil packing: -65 F to 700 F (-54 C to 371 C) Grafoil packing with HT option: -65 F to 1200 F (-54 C to 649 C) Orifice:.177" to.437" (4.5mm to 11.1mm) C V :.53 to 3.55 Pressure Rating and Tubing Selection: For working pressures of -LOK and CPI tube connections, please see the Instrument Tubing Selection Guide (ulletin 4200-TS), found in the Technical Section of the Parker Instrumentation Products Master inder, or the Parker Instrument Tube Fitting Installation Manual (ulletin ). For working pressures of valves with external or internal pipe threads, please see Catalog 4260, Instrumentation Pipe Fittings. Grafoil is a registered trademark GrafTech International Holdings, Inc. 16F-16LR-G-SS 12 Parker Hannifin Corporation Jacksonville, L S

3 Catalog 4110-NV Pressure vs. Temperature Series Needle Valves Flow Characteristics 6 Series Dimensions / Flow Data 4Z-6L-T-SS 2.00 (50.8) Max Open 3.98 (101.1) Min Close 3.43 (87.1) 1.34 (34.0) Panel Hole Diameter: 0.65 (16.5) Max Panel Thickness: 0.42 (10.7) 4F-6R-T-SS 2.00 (50.8) Max Open 3.98 (101.1) Min Close 3.43 (87.1) 1.34 (34.0).59 (15.0) ( ) Denotes dimensions in millimeters.59 (15.0) asic End Connections Flow Data Dimensions Part Number Inlet Outlet Stem Orifice Inline ngle Inline ngle (Port 1) (Port 2) Type Inch mm C V X T * C V X T * Inch mm Inch mm 2F-6LR 2F-6R /8" Female NPT F-6L 2F-6 lunt LR 4-6R 1/4" Compression -LOK 4-6L 4-6 lunt F-6LR 4F-6R /4" Female NPT F-6L 4F-6 lunt M-6LR 4M-6R 1/4" Male NPT 4M-6L 4M-6 lunt W-6LR 4W-6R 1/4" Socket Weld 4W-6L 4W-6 lunt Z-6LR 4Z-6R 1/4" Compression CPI 4Z-6L 4Z-6 lunt M6-6LR M6-6R 6mm Compression -LOK M6-6L M6-6 lunt M6Z-6LR M6Z-6R 6mm Compression CPI M6Z-6L M6Z-6 lunt M8-6LR M8-6R 8mm Compression -LOK M8-6L M8-6 lunt M8Z-6LR M8Z-6R 8mm Compression CPI M8Z-6L M8Z-6 lunt * Tested in accordance with IS S Gas flow will be choked when P 1 - P 2 / P 1 = X T. For CPI and -LOK, dimensions are measured with nuts in the finger tight position. Dimensions in inches/millimeters are for reference only, subject to change. 13 Parker Hannifin Corporation Jacksonville, L S

4 Series Needle Valves Catalog 4110-NV 12 Series Dimensions / Flow Data 2.75 (69.9) Panel Hole Diameter: 0.83 (21.1) Max Panel Thickness: 0.61 (15.5) 2.75 (69.9) 6F-12L-G-SS-HT Max Open 4.24 (107.7) Min Close 3.90 (99.0) Max Open 4.24 (107.7) Min Close 3.90 (99.0) 1.50 (38.1) 8-12-T-SS 1.50 (38.1).61 (15.5) ( ) Denotes dimensions in millimeters.61 (15.5) asic End Connections Flow Data Dimensions Part Number Inlet Outlet Stem Orifice Inline ngle Inline ngle (Port 1) (Port 2) Type Inch mm C V X T * C V X T * Inch mm Inch mm 4-12LR 4-12R /4" Compression -LOK L 4-12 lunt F-12LR 4F-12R /4" Female NPT F-12L 4F-12 lunt Z-12LR 4Z-12R /4" Compression CPI Z-12L 4Z-12 lunt LR 6-12R /8" Compression -LOK L 6-12 lunt F-12LR 6F-12R /8" Female NPT 6F-12L 6F-12 lunt W-12LR 6W-12R /8" Tube Socket Weld W-12L 6W-12 lunt Z-12LR 6Z-12R /8" Compression CPI Z-12L 6Z-12 lunt LR 8-12R /2" Compression -LOK L 8-12 lunt F-12LR 8F-12R /2" Female NPT 8F-12L 8F-12 lunt W-12LR 8W-12R /2" Tube Socket Weld 8W-12L 8W-12 lunt Z-12LR 8Z-12R /2" Compression CPI Z-12L 8Z-12 lunt M10-12LR M10-12R mm Compression -LOK M10-12L M10-12 lunt M10Z-12LR M10Z-12R 10mm Compression CPI M10Z-12L M10Z-12 lunt M12-12LR M12-12R mm Compression -LOK M12-12L M12-12 lunt M12Z-12LR M12Z-12R 12mm Compression CPI M12Z-12L M12Z-12 lunt M14-12LR M14-12R mm Compression -LOK M14-12L M14-12 lunt M14Z-12LR M14Z-12R 14mm Compression CPI M14Z-12L M14Z-12 lunt * Tested in accordance with IS S Gas flow will be choked when P 1 - P 2 / P 1 = X T. For CPI and -LOK, dimensions are measured with nuts in the finger tight position. Dimensions in inches/millimeters are for reference only, subject to change. 14 Parker Hannifin Corporation Jacksonville, L S

5 Catalog 4110-NV Series Needle Valves 16 Series Dimensions / Flow Data 3.50 (88.9) Panel Hole Diameter: 1.02 (25.9) Max Panel Thickness: 0.62 (15.7) 3.50 (88.9) 16M-16LR-G-SS Max Open 5.00 (127.0) Min Close 4.70 (119.4) Max Open 5.00 (127.0) Min Close 4.70 (119.4) ( ) Denotes dimensions in millimeters 1.86 (47.2) 16M16F-16-T-SS 1.86 (47.2).85 (21.6) asic End Connections Flow Data Dimensions Part Number Inlet Outlet Stem Orifice Inline ngle Inline ngle (Port 1) (Port 2) Type Inch mm C V X T * C V X T * Inch mm Inch mm 8-16LR 8-16R 1/2" Compression -LOK 8-16L 8-16 lunt F-16LR 8F-16R 1/2" Female NPT 8F-16L 8F-16 lunt M-16LR 8M-16R 1/2" Male NPT 8M-16L 8M-16 lunt PSW-16LR 8PSW-16R 1/2" Pipe Socket Weld 8PSW-16L 8PSW-16 lunt W-16LR 8W-16R 1/2" Tube Socket Weld 8W-16L 8W-16 lunt Z-16LR 8Z-16R 1/2" Compression CPI 8Z-16L 8Z-16 lunt LR 12-16R 3/4" Compression -LOK 12-16L lunt F-16LR 12F-16R 3/4" Female NPT 12F-16L 12F-16 lunt M-16LR 12M-16R 3/4" Male NPT 12M-16L 12M-16 lunt PSW-16LR 12PSW-16R 3/4" Pipe Socket Weld 12PSW-16L 12PSW-16 lunt W-16LR 12W-16R 3/4" Tube Socket Weld 12W-16L 12W-16 lunt Z-16LR 12Z-16R 3/4" Compression CPI 12Z-16L 12Z-16 lunt LR 16-16R 1" Compression -LOK 16-16L lunt F-16LR 16F-16R 1" Female NPT 16F-16L 16F-16 lunt M-16LR 16M-16R 1" Male NPT 16M-16L 16M-16 lunt Z-16LR 16Z-16R 1" Compression CPI 16Z-16L 16Z-16 lunt M12-16LR M12-16R 12mm Compression -LOK M12-16L M12-16 lunt M12Z-16LR M12Z-16R 12mm Compression CPI M12Z-16L M12Z-16 lunt M20-16LR M20-16R 20mm Compression -LOK M20-16L M20-16 lunt M20Z-16LR M20Z-16R 20mm Compression CPI M20Z-16L M20Z-16 lunt M25-16LR M25-16R 25mm Compression -LOK M25-16L M25-16 lunt M25Z-16LR M25Z-16R 25mm Compression CPI M25Z-16L M25Z-16 lunt * Tested in accordance with IS S Gas flow will be choked when P 1 - P 2 / P 1 = X T. For CPI and -LOK, dimensions are measured with nuts in the finger tight position..85 (21.6) Dimensions in inches/millimeters are for reference only, subject to change. 15 Parker Hannifin Corporation Jacksonville, L S

6 Series Needle Valves Catalog 4110-NV How to Order Dimensions in inches/millimeters are for reference only, subject to change. The correct part number is easily derived from the following example and ordering chart. The six product characteristics required are coded as shown in the chart. The example below describes an angle pattern 6 Series needle valve equipped with 1/4" CPI compression inlet and outlet ports, a regulating stem type, Grafoil packing, stainless steel construction. Example 1: 4Z-6R-G-SS 4Z 6 R G SS Inlet Outlet Valve Series Stem Type Packing ody Material Inlet Outlet 2F 4F 4W M6 M8 4 4M 4Z M6Z M8Z 4 6W 8W 12 M12 4F 6Z 8Z 12Z M12Z 4Z 8 10 M10 M14 6 8F 10Z M10Z M14Z 6F 8 8W 12PSW 16M M20Z 8F 8Z 12W 16Z M25 8M 12F 12Z M12Z M25Z 8PSW 12M 16F M20 Valve Series 6 6L 12 12L 16 16L Stem Type Packing lunt T PTFE R G Grafoil *If the inlet and outlet ports are the same, eliminate the outlet port designator. How to Order Options ody Material SS Stainless Steel High Temperature dd the suffix -HT to the end of the part number to receive valves with a 316 stainless steel lower stem and stainless steel handle. Example: 4M-6L-G-SS-HT Oxygen Cleaning dd the suffix -C3 to the end of the part number to receive valves cleaned and assembled for oxygen service in accordance with Parker Specification ES8003. Example: 8-12LR-T-SS-C3 Stainless Steel ar Handle To obtain valves with stainless steel bar handle, add the suffix -ST to the end of the part number. Example: 12Z-16-T-SS-ST SME 31.1 Compliant Valves dd the suffix -QC311. Example: 8F-12LR-G-SS-QC311 How to Order Maintenance Kits Stainless Steel T-ar Handles with Handle Screw Examples: 6: V4-R-HNDLE-SS; 12:12-R-HNDLE-SS; 16: 16-R-HNDLE-SS luminum T-ar Handles with Handle Screw Examples: 6: V4-R-HNDLE-L; 12:12-R-HNDLE-L; 16: 16-R-HNDLE-L Panel Mounting Nuts Examples: 6: 6-LOCKNT; 12: 12-LOCKNT; 16: 16-LOCKNT PTFE Packing Kits Consists of One PTFE Packing; One Dust Seal; Maintenance Instructions. Kit-Valve Series-T. Example: KIT-12-T Grafoil Packing Kits Consists of One Grafoil Packing; One Dust Seal; Maintenance Instructions. Kit-Valve Series-G. Example: KIT-16-G Grafoil is a registered trademark GrafTech International Holdings, Inc. 16 Parker Hannifin Corporation Jacksonville, L S