PNEUMATIC GROUP AIR PREPARATION UNITS 3/" NPT & " NPT SERIES 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 83
6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 Port size Recommended flow Maximum flow Type Page No. (l/min)* (l/min) 3/" NPT 3500 7000 XFRL-3/-US Air preparation units " NPT 5000 00 XFRL--US 3/" NPT 3500 00 XKL-3/-US 85-86 87-88 " NPT 5000 0000 XKL--US Filter-regulator 3/" NPT 3500 500 XK-3/-US " NPT 5000 000 XK--US 89- Filter-waterseparator 3/" NPT 3500 500 XF-3/-US " NPT 5000 500 XF--US 9-9 Pressure regulating valve 3/" NPT 3500 500 XR-3/-US " NPT 5000 3500 XR--US 93-9 3/" NPT 3500 7000 XL-3/-US Oil mist lubricator " NPT 5000 8000 XL--US 95-96 Pilot operated valve 3/" NPT 3500 500 XRV-3/-US " NPT 5000 3500 XRV--US 97-98 3/ way shut-off valve Start-stop valve 3/" NPT 3500 >0000 XDV-3/-US " NPT 5000 >0000 XDV--US 3/" NPT 3500 000 XDS-3/-US " NPT 5000 6000 XDS--US 99 0-0 The right to introduce technical modifications is reserved 8
The right to introduce technical modifications is reserved Characteristics Pressures quoted as gauge pressure System Air preparation unit comprising filter-water-separator, diaphragm-type pressure regulating valve and oil mist lubricator *) Type XFRL-3/-US XFRL--US Port size 3/" NPT " NPT Max. condensate cm 3 500 capacity Condensate drainage Standard: manual On request: semiautomatic with pressure relief or fully automatic Max. oil capacity cm 3 500 Oil refilling Standard: manual - also during operation On request: bowl with automatic refilling Installation Vertical Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +50 at 0 bar on request) Weight (mass) kg 5.70 Pneumatic Characteristic ) Operating pressure p min bar 0 range - inlet pressure p max bar 0 Operating pressure p min bar 0.5 range - outlet pressure p max bar 0 Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow 3) Q n l/min 7000 00 m 3 /h 0 50 ) For further characteristics see pages 87-96 ) at 6 bar and 5 m/s 3) at p =0 bar on p =6.3 p = bar *) Use only recommended oils with viscosity VG3 to ISO 38 (3 mm /s at 0 C) or HOERBIGER special oil, Order No.: KY 8766 Flow Characteristics Type: XFRL--US p (bar) 8 7 6 5 3 8 8 6,3 8 v= 5m/s 8 8 5000 0000 5000 Q n (l/min) Air Preparation Unit 3/" NPT, " NPT Standard with metal bowl XFRL Air preparation unit comprising: Filter-water-separator Diaphragm-type pressure regulating valve Oil mist lubricator Gauge Mounting bracket Modular system Modern design 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 For single units see pages 89-96 85
Dimensions (mm) Porting block kit to provide unlubricated air Porting block 35 deep 8,5 7, deep 30 9 M8 6 6 70 / NPT G/ 5 deep deep ø8 Order No.: PL 777, PL 77 Dimensions (mm) Type: XFRL-3/-US XFRL--US 350 30 0 70 6 ø6 97 9 80 60 ca. 36 ** Version-A (automatic drainage) * ø9 33 9,5 min. 30 mm for filter changing * Two opposite gauge ports /" NPT ** On delivery the plug screw is not assembled. = oil adjusting screw = oil refilling plug Order Instructions Description Port size Type Order No. Basic model 3/" NPT XFRL-3/-US PB 3609-N00 Basic model " NPT XFRL--US PB 369-N00 With semiautomatic drainage 3/" NPT XFRL-3/-H-US PB 3609-N0 With semiautomatic drainage " NPT XFRL--H-US PB 369-N0 With automatic drainage 3/" NPT XFRL-3/-A-US PB 3609-N05 With automatic drainage " NPT XFRL--A-US PB 369-N05 Description Order No. Porting block kit 3/" NPT PL 777 Porting block kit " NPT PL 77 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 Solvent resistant sight glass PL 577 * All products available in metric ports 86
Characteristics Pressures quoted as gauge pressure System Air preparation unit comprising filterregulator and oil mist lubricator *) Type XKL-3/-US XKL--US Port size 3/" NPT " NPT Max. condensate cm 3 500 capacity Condensate drainage Standard: manual On request: semiautomatic with pressure relief fully automatic Max. oil capacity cm 3 500 Oil refilling Standard: manual - also during operation On request: bowl with automatic refilling Installation Vertical Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +50 at 0 bar on request) Weight (mass) kg. Pneumatic Characteristic ) Operating pressure p min bar 0 range - inlet pressure p max bar 0 Operating pressure p min bar 0.5 range - outlet pressure p max bar 0 Recommended flow ) Q n l/min 3500 5000 m 3 /hh 0 300 Maximum flow 3) Q n l/min 00 0000 m 3 /h 50 600 ) For further characteristics see pages 87-96 ) at 6 bar and 5 m/s 3) at p =0 bar on p =6.3 p = bar *) Use only recommended oils with viscosity VG3 to ISO 38 (3 mm /s at 0 C) or HOERBIGER special oil, Order No.: KY 8766 Air Preparation Unit 3/" NPT, " NPT Standard with metal bowl Degree of moisture separation 96% XKL Air preparation unit comprising: Filter-regulator Oil mist lubricator Gauge Mounting bracket The right to introduce technical modifications is reserved Modular system Modern design Version with NPTF thread 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 For single units see pages 89-96 87
Dimensions (mm) Type: XKL-3/-US XKL--US 60 Coupling kit for connecting single units 30 0 6 ø6 97 9 80 Order No.: PL 5670 ** ø9 3/ way shut-off valve 33 60 9,5 * min. 30 mm for filter changing Version-A (automatic drainage) Order No.: XDV-3/-US: PB 3389-N00 XDV--US: PB 3399-N00 * Two opposite gauge ports /" NPT ** On delivery the plug screw is not assembled. Order Instructions Description Port size Type Order No. Basic model 3/" NPT XKL-3/-US PB 39-N00 Basic model " NPT XKL--US PB 359-N00 With semiautomatic drainage 3/" NPT XKL-3/-H-US PB 39-N0 With semiautomatic drainage " NPT XKL--H-US PB 359-N0 With automatic drainage 3/" NPT XKL-3/-A-US PB 39-N05 With automatic drainage " NPT XKL--A-US PB 359-N05 Description Order No. Porting block kit 3/" NPT PL 777 Porting block kit " NPT PL 77 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 Solvent resistant sight glass PL 577 Coupling kit PL 5670 Regulator spring for operating pressure 6 bar PL 6570 Gauge, Ø 63 mm, 0-0 bar, /" NPT KZ 887 Mounting kit PL 5669 * All products available in metric ports 88
The right to introduce technical modifications is reserved Characteristics Pressures quoted as gauge pressure System Cyclone system with filter element, combined with a diaphragm-type pressure regulating valve (spring loaded) with flow compensation and secondary pressure relief Type XK-3/-US XK--US Port size 3/" NPT " NPT Pore size of filter µm Standard: 30 element 5 Max. condensate cm 3 500 capacity Condensate drainage Standard: manual semiautomatic with pressure relief or fully automatic Installation Vertical Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +50 at 0 bar on request) Weight (mass) kg.8 Pneumatic Characteristic Operating pressure p min bar 0 range - inlet pressure p max bar 0 Operating pressure p min bar 0.5 range - outlet pressure p max bar 0 Min. pressure difference p -p bar 0. Hysteresis p =0/p =0 bar 0.6 Hysteresis p =0/p =0 bar 0.3 Recommended flow ) Q n l/min 3500 5000 m 3 /hh 0 300 Maximum flow ) Q n l/min 500 000 m 3 /h 750 80 Degree of moisture η % 96 96 separation at recommended flow ) at 6 bar and 5 m/s ) at p =0 bar on p =6.3 p = bar Filter- Regulator 3/" NPT, " NPT Pressure regulating valve with filter-water-separator Standard with metal bowl Degree of moisture separation 96% XK Modular system Modern design Version with NPTF thread Filter-regulator with flow compensation and secondary pressure relief, handwheel lockable For single units see pages 89-96 For air preparation units see pages 85-87 89
Dimensions (mm) Type: XK-3/-US, XK--US 70 0 0 ø6 6 97 Coupling kit for connecting single units 9 ca. 36 80 60 *,5 ** Order No.: PL 5670 ca. 9 ø9 3/ way shut-off valve Version-A (automaticdrainage) min. 30 mm for filter changing * Two opposite gauge ports /" NPT ** On delivery the plug screw is not assembled. Order No.: XDV-3/-US: PB 3389-N00 XDV--US: PB 3399-N00 Order Instructions Description Port size Type Order No. Basic model 3/" NPT XK-3/-US PB 3369-N00 Basic model " NPT XK--US PB 3379-N00 With filter element 5 µm 3/" NPT XK-3/-5-US PB 3369-N6 With filter element 5 µm " NPT XK--5-US PB 3379-N6 With semiautomatic drainage 3/" NPT XK-3/-H-US PB 3369-N0 With semiautomatic drainage " NPT XK--H-US PB 3379-N0 With automatic drainage 3/" NPT XK-3/-A-US PB 3369-N0 With automatic drainage " NPT XK--A-US PB 3379-N0 With adapter for keylock 3/" NPT XK- 3/-X-US on request With adapter for keylock " NPT XK--X-US on request Description Order No. Porting block kit 3/" NPT PL 777 Porting block kit " NPT PL 77 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 Solvent resistant sight glass PL 577 Coupling kit PL 5670 Manometer, Ø 63 mm, 0-0 bar, /" NPT (HOERBIGER-design) KG 800 Mounting kit PL 5669 * All products available in metric ports
Characteristics Pressures quoted as gauge pressure System Cyclone system and downstream filter element (XF), Dust filter (XFD) Type XF-3/-US XFD-3/-US XF--US XFD--US Port size 3/" NPT " NPT Max. condensate cm 3 500 capacity Pore size of filter µm Standard: 30 element 5 and (XFD-US) Condensate drainage Standard:manual semiautomatic (XF-US) (pressure relief) and fully automatic (XF-US) Installation Vertical Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +50 at 0 bar on request) Weight (mass) kg.0 Pneumatic Characteristic Operating pressure p min bar 0 range p max bar 0 Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow ) Q n l/min 500 00 500 30 m 3 /h 750 68 80 83 Degree of moisture η % 96 * 96 * separation at recommended flow ) at 6 bar and 5 m/s * only solid particles > 99 % related to µm ) at p =6.3 bar and p= bar Filter- Water- Separator, Dust Filter 3/" NPT, " NPT Standard with metal bowl Degree of moisture separation 96% >99 % (XFD-US) XF XFD The right to introduce technical modifications is reserved XF: Filter-water-separator with cyclone system and downstream filter element. XFD: Dust filter with large filter surface for long service life. For compressed air system with air dryers. Modular system Modern design For single units see pages 89-96 For air preparation units see pages 85-87 9
Dimensions (mm) Type: XF-3/-US XF--US Flow Characteristics Type: XF--US 70 0 p (bar) 8 v= 5m/s 0 7 6 6 9 97 5 3 80 60 Version-A (automatic drainage) 33 9,5 ø9 5000 0000 5000 Coupling kit for connecting single units 0000 Q n (l/min) min. 30 mm for filter changing Order No.: PL 5670 Order Instructions Description Port size Type Order No. Basic model 3/" NPT XF-3/-US PB 309-N00 Basic model " NPT XF--US PB 39-N00 With filter element 5 µm 3/" NPT XF-3/-5-US PB 309-N6 With filter element 5 µm " NPT XF--5-US PB 39-N6 With filter element µm 3/" NPT XFD-3/--US PB 309-N70 With filter element µm " NPT XFD---US PB 39-N70 With semiautomatic drainage 3/" NPT XF-3/-H-US PB 309-N0 With semiautomatic drainage " NPT XF--H-US PB 39-N0 With automatic drainage 3/" NPT XF-3/-A-US PB 309-N0 With automatic drainage " NPT XF--A-US PB 39-N0 Description Order No. Mounting kit PL 5669 Coupling kit PL 5670 Porting block kit 3/" NPT PL 777 Porting block kit " NPT PL 77 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 * All products available in metric ports 9
Characteristics Pressures quoted as gauge pressure System Diaphragm-type pressure regulating valve (spring loaded) with flow compensation and secondary pressure relief Type XR-3/-US XR--US Port size 3/" NPT " NPT Installation In any position Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +60 on request) Weight (mass) kg.80 Pneumatic Characteristic Operating pressure p min bar 0 range - inlet pressure p max bar 6 Operating pressure p min bar 0.5 on request 0.5 ) range - outlet pressure p max bar 0 6 Min. pressure difference p -p bar 0. Hysteresis p =0/p =0 bar 0.6 Hysteresis p =0/p =0 0. Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow 3) Q n l/min 500 3500 m 3 /h 750 80 ) at 6 bar and 5 m/s ) By the use of special springs, the outlet pressure can be precisely regulated in the specified p range 3) at p =0 bar on p =6.3 p = bar Pressure Regulating Valve 3/" NPT, " NPT XR The right to introduce technical modifications is reserved Flow Characteristics Type: XR--US p (bar) 8 7 6 5 3 8 8 v= 5m/s 8 6,3 8 8 5000 0000 5000 Q n (l/min) Outlet Pressure Variation with Fluctuating Inlet Pressure p (bar) 3,6 3, 3, 3,0,8,6, 3000 (l/min) 0 (l/min) 5 6 7 8 9 0 p (bar) Diaphragm-type pressure regulating valve (spring loaded) with secondary pressure relief and flow compensation, handwheel lockable Modular system Modern design For single units see pages 89-96 For air preparation units see pages 85-87 93
0 Gauge Ø 63 mm, 0-0 bar, /" NPT Coupling kit for connecting single units 3 5 6 7 bar 8 bar 9 Order No.: KG 800 (Pages -3) Order No.: PL 5670 Dimensions (mm) Type: XR-3/-US XR--US 70 0 0 6 ø6 97 Key lock complete Order No. PL 77 9 ca. 36 80 60 *,5 ** Version-X * Two opposite gauge ports /" NPT ** On delivery the plug screw is not assembled. Order Instructions Description Port size Type Order No. Basic model 3/" NPT XR-3/-US PB 39-N00 Basic model " NPT XR--US PB 339-N00 With adapter for keylock 3/" NPT XR-3/-X-US PB 39-N06 With adapter for keylock " NPT XR--X-US PB 339-N06 Description Order No. Mounting kit PL 5669 Coupling kit PL 5670 Gauge, Ø 63 mm, 0-0 bar, /" NPT (HOERBIGER-design) KG 800 Porting block kit 3/" NPT PL 777 Porting block kit " NPT PL 77 Keylock complete PL 77 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 Regulator spring for operating pressure 6 bar Note: use only for special applications PL 6570 * All products available in metric ports 9
Characteristics Pressures quoted as gauge pressure System Oil mist lubricator with flow compensation *) Type XL-3/-US XL--US Port size 3/" NPT " NPT Oil/air ratio Degressive (number of drops per minute remains constant) Max. oil capacity cm 3 500 Oil refilling Standard: manual - also during operation On request: bowl with automatic refilling Installation Vertical Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +50 at 0 bar on request) Weight (mass) kg.60 Pneumatic Characteristic Operating pressure p min bar 0 range p max bar 0 Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow ) Q n l/min 7000 8000 m 3 /h 00 080 ) at 6 bar and 5 m/s ) at p =6.3 bar and p = bar Flow Characteristics *) Use only recommended oils with viscosity VG3 to ISO 38 (3 mm /s at 0 C) or HOERBIGER special oil, Order No.: KY 8766 Oil mist lubricato 3/" NPT, " NPT Standard with metal bowl XL Type: XL--US p (bar),,,0 0,8 0,6 0, 0, bar bar 6 bar 8 bar The right to introduce technical modifications is reserved Oil/Air Ratio Type: XL--US 50 30 0 0 5 3 5000 0000 drops /m 3 air dr./min 5 dr./min 5000 Q n (l/min) Min. Operating Conditions Type: XL--US p (bar) 0 8 6 Oil mist lubricator with flow compensation (number of drops per minute is constant) Modular system Modern design 0, 50 300 000 =5 drops = drops 3000 0000 0000 Q n (l/min) 50 00 50 00 Q n (l/min) For single units see pages 89-96 For air preparation units see pages 85-87 95
Made in Germany Dimensions (mm) Type: XL-3/-US XL--US Air hydraulic pumptyp LHP-US 70 9 0 0 6 97 LHP 80 60 9.5 Order No.: PB 0599-N000 aprox.50 ø9 Bowl with oil level control (float-type switch) Version -F (Bowl with /"NPT G automatic refilling) = oil adjusting screw = oil refilling plug Order No.: PL 607 Order Instructions Description Port size Type Order No. Basic model 3/" NPT XL-3/-US PB 39-N00 Basic model " NPT XL--US PB 359-N00 With automatic oil refilling 3/" NPT XL-3/-F-US PB 39-N0 With automatic oil refilling " NPT XL--F-US PB 359-N0 Description Order No. Mounting kit PL 5669 Coupling kit PL 5670 Porting block kit 3/" NPT PL 777 Porting block kit " NPT PL 77 Air hydraulic pump LHP-US PB 0599-N000 Solvent resistant sight glass PL 577 Bowl with oil level control (floa-type switch) for XL-US PL 779 Bowl with automatic refilling for XL-US PL 7387 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 * All products available in metric ports 96
Characteristics Pressures quoted as gauge pressure System Pilot operated diaphragm-type pressure regulating valve with secondary pressure relief and flow compensation - suitable for remote control Type XRV-3/-US XRV--US Port size 3/" NPT " NPT Installation In any position Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +60 on request) Weight (mass) kg.5 Pneumatic Characteristic Operating pressure p min bar 0 range - inlet pressure p max bar 6 Operating pressure p min bar 0.5 range - outlet pressure p max bar 8 Min. pressure difference p -p bar 0. Hysteresis p =0/p =0 bar 0.6 Hysteresis p =0/p =0 bar 0. Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow ) Q n l/min 500 3500 m 3 /h 750 80 Own air usage Low (0.8 x p [l/min]) Recommended pilot SR-/-US pressure regulating valve ) at p = 6 bar and 5 m/s ) at p =0 bar on p =6.3 p = bar Pressure Regulating Valve 3/" NPT, " NPT XRV The right to introduce technical modifications is reserved Flow Characteristics p (bar) 8 6 8 6,3 8 v= 5m/s 8 8 8 000 8000 000 6000 Q n (l/min) Outlet Pressure Variation with Fluctuating Inlet Pressure p (bar) 3,8 3,6 3, 3, 3,0,8,6, 3000 (l/min) 0 (l/min) 5 6 7 8 9 0 p (bar) Pilot operated diaphragm-type pressure regulating valve with secondary pressure relief and flow compensation - suitable for remote control Modular system Modern design For filter-water-separator see pages 9-9 For pilot pressure regulating valve see pages 39-0 97
0 Dimensions (mm) Type: XRV-3/-US XRV--US 5 /"NPT G/ 6 06 A * G/ /"NPT* 60 55,5 **,5 30 5 deep 9 97 0 70 *) Two opposilte gauge ports /" NPT **) On delivery the plug screw is not assembled. Gauge Ø 63 mm, 0-0 bar, /" NPT Coupling kit for connecting single units Recommended pilot pressure regulating valve Type SR-/-US 3 5 6 7 bar 8 bar 9 Order No.: KG 800 (Pages -3) Order No.: PL 5670 Order No.: PB 59-N000 Order Instructions Description Port size Type Order No. Basic model 3/" NPT XRV-3/-US PB 369-N0 Basic model " NPT XRV--US PB 379-N0 Description Order No. Gauge, Ø 63 mm, 0-0 bar, /" NPT (HOERBIGER-design) KG 800 Mounting kit PL 5669 Coupling kit for connection AIRFIT X PL 5670 Recommended pilot pressure regulating valve SR-/-US PB 59-N000 3/ way shut-off valve 3/" NPT, " NPT PB 3389-N00, PB 3399-N00 * All products available in metric ports 98
Characteristics System Pressures quoted as gauge pressure 3/ way shut-off valve Mounting Direct assembly with any unit of series AIRFIT prestige with coupling kit Type XDV-3/-US XDV--US Port size 3/" NPT " NPT Installation In any position Medium and ϑ min C 0 (further temperatures ambient temperatures ϑ max C +60 at 0 bar on request) Weight (mass) kg.8 Pneumatic Characteristic Operating pressure p min bar 0 range p max bar 6 Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow Q max l/min > 0000 > 0000 m 3 /h > 00 > 00 ) at p = 6.3 bar and 5 m/s 3/ Way Shut-off Valve 3/" NPT, " NPT (Ball valve) Actuation: Rotary switch XDV-3/-US XDV--US 3 Dimensions (mm) Standard version Type: XDV-US Version X (can be shut off) Type: XDV-..-X-US The right to introduce technical modifications is reserved 0 78 0 97 6,5 0 * * 78 97 6,5 0 * * Rotary switch can be turned Indication of positions Flow open, exhaust closed Inlet closed outlet exhausted Variante X: can be shut off in different modes Flow direction shown by arrow * On delivery the plug screw and silencer are not asembled. Order Instructions Description Port size Type Order No. Standardversion 3/" NPT XDV-3/-US PB 3389-N00 " NPT XDV--US PB 3399-N00 Version X 3/" NPT XDV-3/-X-US PB 3389-N0 ( can be shut off by lock ) " NPT XDV--X-US PB 3399-N0 Description Bestell-Nr. Coupling kit PL 5670 Mounting kit PL 5669 Lock, codable by customer KG 7 * All products available in metric ports 99
00
Characteristics Pressures quoted as gauge pressure System Start-stop valve with pneumatic actuation and built-in exhaust silencer Type XDS-3/-US XDS--US Actuation Pneumatic Port size 3/" NPT " NPT Installation In any position Medium and ϑ min bar 0 (further temperatures ambient temperatures ϑ max bar +60 on request) Weight (mass) kg.75.75 Pneumatic Characteristics Operating pressure p bar min range p bar 0 max Recommended flow ) Q n l/min 3500 5000 m 3 /h 0 300 Maximum flow ) Q max l/min 000 6000 m 3 /h 85 965 ) at p = 6.3 bar and 5 m/s ) at p = 6.3 bar and p = bar Start- Stop Valve 3/" NPT, " NPT Actuation: Pneumatic XDS-..-US Flow time in start phase with adjustment screw fully open and 6.3 bar: 0.03 s/l Venting Time in Relation to Volume Pressure Reduction Venting Time from to (s) * 8 0.bar 0.085 x V (l) = t (s) The right to introduce technical modifications is reserved 6 0.bar 0.075 x V (l) = t (s) 0.bar 0.07 x V (l) = t (s) * Note: This calculation assumes short connections with NW 5 mm tubing directly after the XDS stop valve Installation Instructions Pneumatic pilot port /8"NPT G/8 for for start start valve valve Start-stop valve Pneumatic pilot port G/8 /8"NPT for start for start valve valve Start-stop valve The start function provides slow pressure build-up and the stop function provides venting in pneumatic equipment. Easily adaptable to customer's choice of colour and private labelling Thread available pressure build-up time adjustable Start and stop functions combined in one unit Pneumatic pilot port G/8 /8"NPT for stop for start valve valve Pneumatic pilot port G/8 /8"NPT for stop for start valve valve 0
Examples of Circuits Combined start/stop function Combined start/stop function with acknowledgment Start function Adjustment screw 3 3 e.g. S9 38RF-/8 NG Adjustment screw 3 3 Adjustment screw 3 3 e.g. S9 58RF-/8 e.g.. S9 38RF-/8 NO Dimensions (mm) Type: XDS-3/-US, XDS--US /8"NPT G/8 * 95 30 "NPT (3/"NPT) G (G3/) 3 /"NPT G /8 3 "NPT (3/"NPT) "NPT G (G3/) G 0 5,5 75,5 * Adjustment screw for pressure build-up time (SW 3 socket screw) Note: Mounting bracket for p side is included as standard, but this bracket is only needed if a " NPT exhaust silencer is used. Please order standard bracket separately. Order Instructions Description Actuation Port size Type Order No. Start-stop valve pneumatic 3/" NPT XDS-3/-US PB 369-N00 " NPT XDS--US PB 379-N00 Description Coupling kit Mounting kit * All products available in metric ports Order No. PL5670 PL5669 0