PEEK SS Columns & Guard Columns ~ Stainless Steel Analytical Columns ~ PEEK Columns ID 2.1, 4.0, 4.6 & 7.5 mm ~ Jour-Guard Cartridges Stainless Steel or PEEK ~ Stainless Steel End Fittings 1/4 OD Columns ~ Stainless Steel Preparative Columns ~ In-Line Biocompatible Guard Columns ~ One-Piece Column Coupler ~ Column End Plugs Stainless Steel Analytical Columns Jour s 4.6 mm ID stainless steel analytical columns are made of high quality SS316L. The finish of the inner surface is extremely smooth with a maximum of 0.2 µm RA. We prefer for safety reasons (especially when packing columns) the threaded (5/16-24) tubing type with SS end-fitting and SS insert. The insert is on the inside conical shaped in order to provide an equal sample distribution over the 0.5 or 2 µm frit. Frits are made of SS 316L and supplied with a PEEK ring. All connections are 10-32 female fittings. We also offer 3.0 and 4.0 mm ID columns. Stainless Steel Analytical Columns 4.6 mm ID Length 0.5 µm 2.0 µm 50 mm 3205046-0.5 3205046-2 100 mm 3210046-0.5 3210046-2 150 mm 3215046-0.5 3215046-2 250 mm 3225046-0.5 3225046-2 300 mm 3230046-0.5 3230046-2 Stainless Steel Analytical Columns 4.0 mm ID
Length 0.5 µm 2.0 µm 50 mm 3205040-0.5 3205040-2 100 mm 3210040-0.5 3210040-2 150 mm 3215040-0.5 3215040-2 250 mm 3225040-0.5 3225040-2 300 mm 3230040-0.5 3230040-2 Length 0.5 µm 2.0 µm 50 mm 3205030-0.5 3205030-2 100 mm 3210030-0.5 3210030-2 150 mm 3215030-0.5 3215030-2 250 mm 3225030-0.5 3225030-2 300 mm 3230030-0.5 3230030-2 324046-2 Insert 324046-5 End Fitting 324046-8 Packing Adapter 324046-11 Slurry Reservoir 324046-14 Packing Seal 1103-2P PEEK Encased SS Frit, 2µm 1103-0.5P PEEK Encased SS Frit, 0.5 µm
PEEK Columns PEEK Columns 4.6 mm & 4.0 mm ID Today s HPLC and IC applications are more demanding than ever. The limitations of traditional stainless steel pose significant problems for a growing number of important biotechnology and ion chromatography applications. Wetted Surfaces: PEEK and PAT (PEEK Alloyed with Teflon) frits Pressures: Max. 350 bar (5000 psi) continous. During packing Max. 560 bar (8000 psi) PEEK Columns 7.5 mm ID Ideal for Semi-prep Biochromatography. The basic column design is shown in the figure and consists of a length of threaded PEEK tubing and two Peek end fittings with the packed bed held in place by two PAT (PEEK Alloyed with Teflon) frits. Connections are made through PEEK inlet and outlet fittings which accept 1/16 OD tubing and standard fingertight fittings. Max operating pressure 350 bar (5000 psi). Low Protein Binding insures high recovery and accurate quantification Wetted Surfaces: PEEK and PAT (PEEK Alloyed with Teflon) frits Pressure: Up to 350 bar (5000 psi) PEEK Columns 2.1 mm ID We have designed this column for your narrow-bore applications and where only limited amounts of sample are available for analysis. Because 2.1 mm ID columns operate at 1/5th the flow rate of their 4.6 mm counterparts, the same sample mass injected on a 2.1 mm column will produce 5X the detector signal. This greater mass sensitivity provides the same analysis as a 4.6 mm column with only 20% of the sample. Only PEEK and PAT (PEEK Alloyed with Teflon) contact the fluid stream. Wetted Surfaces: PEEK and PAT frits Pressure: Should not be used over 210 bar (3000 psi) 2.1 mm ID PEEK Column Tube PAT Frit PEEK End Fitting PEEK Columns 2.1 mm ID 65001 30 mm x 2.1 mm 65002 50 mm x 2.1 mm 65003 100 mm x 2.1 mm 65005 150 mm x 2.1 mm 65006 250 mm x 2.1 mm 65007 300 mm x 2.1 mm 65008 PAT Frit 65009 End Fitting
65216 Packing Adapter 65011 Packing Seal PEEK End Fitting PAT Frit 4.6 mm ID PEEK Column Tube PEEK Columns 4.6 mm ID 66174 30 mm x 4.6 mm 66175 50 mm x 4.6 mm 66176 100 mm x 4.6 mm 66180 125 mm x 4.6 mm 66177 150 mm x 4.6 mm 66178 250 mm x 4.6 mm 66179 300 mm x 4.6 mm 66152 PAT Frit 66140 PEEK End Fitting 66155 Packing Adapter 66158 Packing Seal 7.5 mm ID PEEK Column Tube PEEK Frit Spacer PAT Frit PEEK End Fitting PEEK Columns 7.5 mm ID 67202 50 mm x 7.5 mm 67222 75 mm x 7.5 mm 67204 100 mm x 7.5 mm 67206 150 mm x 7.5 mm 67208 250 mm x 7.5 mm
67220 300 mm x 7.5 mm 67152 PAT Frit 67140 PEEK End Fitting 67190 PEEK Frit Spacer 67216 Packing Adapter 67218 Packing Seal PEEK End Fitting PAT Frit 4.0 mm ID PEEK Column Tube 68181 50 mm x 7.5 mm 68182 75 mm x 7.5 mm 68183 100 mm x 7.5 mm 68184 150 mm x 7.5 mm 68185 250 mm x 7.5 mm 68186 300 mm x 7.5 mm 68152 PAT Frit 66140 PEEK End Fitting 66155 Packing Adapter 66158 Packing Seal Jour-Guard Cartridges Stainless Steel or PEEK
Jour-Guard Cartridge System is a breakthrough in simplicity, reliability and performance! Packing 69080 SS Jour-Guard Cartridge RP/C18-5 µm 69081 SS Jour-Guard Cartridge RP/C8-5 µm 69082 SS Jour-Guard Cartridge RP/Phenyl-5 µm 69083 SS Jour-Guard Cartridge NP/Silica-5 µm 690801 PEEK Jour-Guard Cartridge RP/C18-5 µm 690811 PEEK Jour-Guard Cartridge RP/C8-5 µm 690821 PEEK Jour-Guard Cartridge RP/Phenyl-5 µm 690831 PEEK Jour-Guard Cartridge NP/Silica-5 µm 08101 Jour-Guard Holder Includes: P/N 25602, Jour One-Piece Column Coupler, Female Type
Stainless Steel End Fittings 1/4 OD Columns - Can be delivered with or without distributor plate - Comes complete with 0.5, 2 or 5 µm SS frits - Ready for mounting with a configuration to match most instruments. We produce high quality SS column end fittings for standard 1/4 columns from SS 316L steel. Here is a fitting which is passivated with nitric acid and which features a flow geometry producing optimum distribution of sample and eluant across the surface of the column. The Jour SS end fittings are cleaned with ultrasound and are ready for mounting. Stainless Steel End Fittings 1/4 OD Columns CE14-0.5 CE14-2 CE14-5 Stainless Steel Column End Fitting with 0.5 µm SS Frit Stainless Steel Column End Fitting with 2 µm SS Frit Stainless Steel Column End Fitting with 5 µm SS Frit Back to Peek - SS Columns & Guard Columns Stainless Steel Preparative Columns Jour offers a complete line of empty 20 mm ID (1 OD) preparative columns in a variety of lengths including guard columns. We use a zero void end-cap, which accepts industry standard (10-32) fittings and all columns have threaded ends. This avoids the complicated connections with ferrules and allows easy cleaning and refilling. Jour Stainless Steel 20 mm ID Prep. Columns Length (mm)
Untitled Document Page 8 of 10 45-50 SS Prep. Column 20 mm ID 50 mm 45-100 SS Prep. Column 20 mm ID 100 mm 45-150 SS Prep. Column 20 mm ID 150 mm 45-250 SS Prep. Column 20 mm ID 250 mm 45-300 SS Prep. Column 20 mm ID 300 mm 45-500 SS Prep. Column 20 mm ID 500 mm 45-1000 SS Prep. Column 20 mm ID 1000 mm Accessories for 20 mm ID Prep. Columns 43 Slurry reservoir complete for 20 mm ID (1 OD) columns (light version, 1 m length, 20 mm ID) 44 Slurry reservoir complete for 20 mm ID (1 OD) columns (heavy version, 40 mm ID) 46 SS Replacement Frit 5 µm 47 SS Column to Column Adapter 20 mm (to join two columns or guard columns) 48 SS Guard Column (50 mm) 49 SS End piece 54 SS Plate 1400-.787-.067-2 Teflon encased Poro-Web Frit OD 20 mm Thickness 1.7 mm 2 µm 1400-.787-.067-5 Teflon encased Poro-Web Frit OD 20 mm Thickness 1.7 mm 5 µm Back to Peek - SS Columns & Guard Columns In-Line Biocompatible Guard Column - Biocompatible - Easy to Fill Jour's In-Line PEEK Guard Column System extends the life of your valuable analytical column by trapping contaminants from the sample and mobile phase, thereby preventing loss of retention.
Only PEEK and PAT contact the eluant and sample. This system is ideal for use with proteins or other biopolymers that may be contaminated or adsorbed by metal surfaces. Jour Guard Columns are easily dry-packed or slurry packed. Guard columns may be changed in minutes without the use of tools - all connections may be made by hand. In-Line PEEK Guard Column 68252 In-Line Guard Column, Includes 68126 Long Cartridge Nut 68127 Guard Cartridge Insert 68242 Guard Cartridge ID 8.00 x 3.00 mm 68255 Filter Body 27300 Slurry Packing Adapter Back to Peek - SS Columns & Guard Columns One-Piece Column Coupler - Join Column to Column - Join Column to Guard Column - Join Column to Injector or Detector - No Wrenches Required Seals to 350 bar (5000 psi) - Metal-Free PEEK Version Here is a inexpensive way to connect columns without the use of extra tubing to join a column to a guard column or to join a column to the injector. The One-Piece-Column-Coupler is made of PEEK with a knurled handle which replaces wrenches. It is also metal-free, and can sustain a working pressure of 350 bar (5000 psi). One-Piece Column Coupler Color Code 25602 Female Type Column Coupler for Columns with Black 10-32 female ports 25603 Waters Type Column Coupler for Waters Columns Red 25604 Male Type Column Coupler for Columns with Red + Bushing 10-32 Male Fittings, 25605 Valco Type Column Coupler for Valco Fittings Blue 25606 Waters Type Column Coupler to 10-32 Female ports Black with W & F intials
Back to Peek - SS Columns & Guard Columns Column End Plugs Try our column end plugs in fingertight design. One size fits all columns. Easy handling is guaranteed by the additional 5/16" wrench flat, which allows you to loosen the plug in case it should be stuck. The long design and the threading down to the ferrule ensures a safe closing of your valuable column. We have made the entire test: Plug sealing, plug evaporation and of course the drop test. We recommend our Column End Plug. Column End Plugs P/N Color 4071 White 4072 Black 4073 Red 4074 Green 4075 Blue Back to Peek - SS Columns & Guard Columns