Technical Report.78a Chemical compatibility of the Pall QPoint TM - Tap Assembly with common surface disinfectants QPoint - More than Filtration
.0 Background The Pall QPoint Tap Water Filter Assembly consists of a chromed reusable, designed to fit to all standard tap water outlets, and a disposable Filter Capsule. The Pall QPoint Filter Capsule is indicated to remove bacteria, protozoa, fungi and particles from the water supply for up to calendar months (maximum 6 days). The is supplied non-sterile and has been hygienically designed. If it is visibly contaminated or is known to have become contaminated the external surfaces may be cleansed using commonly available cleaning products. Figure Pall QPoint Tap Tests to confirm compatibility of the QPoint Tap Assembly with common surface disinfectants such as quaternary ammonium, alcohol and active chlorine solutions have been conducted and are summarised.
.0 Quaternary ammonium solution (0.5 %) Three s were immersed in a 0.5 % quaternary ammonium solution for 7 days at room temperature. The duration of immersion was based on a theoretical 5 minute daily disinfection over a 5 year period. changes in were observed and there were no visible particulates in the test solution. Function of the was confirmed by successful connection and of a Filter Capsule 90 times*. The was subsequently installed on a tap fitted with an appropriate Quick Connect Adaptor and a Filter Capsule connected according to instructions for use. leaks were observed at the connection between the tap outlet and the or at the connection between and Filter Capsule when flow was initiated (Table ). Table. Chemical compatibility of the QPoint - Tap Assembly following immersion in a 0.5 % quaternary ammonium solution for 7 days in 0.5 % quaternary ammonium solution of 0.5 % quaternary ammonium solution Filter The Pall QPoint Tap Assembly is considered to be compatible with 0.5 % quaternary ammonium solutions. www.pall.com/qpoint
.0 Alcohol solution (70 %) Three s were immersed in a 70 % alcohol solution for 48 hours at room temperature. The duration of immersion was based on a theoretical minute daily disinfection over a 5 year period. changes in were observed and there were no visible particulates in the test solution. Function of the was confirmed by successful connection and of a Filter Capsule 90 times*. The was subsequently installed on a tap fitted with an appropriate Quick Connect Adaptor and a Filter Capsule connected according to instructions for use. leaks were observed at the connection between the tap outlet and the or at the connection between and Filter Capsule when flow was initiated (Table ). Table. Chemical compatibility of the QPoint Tap Assembly following immersion in a 70% alcohol solution for 48 hours in 70 % alcohol solution of 70 % alcohol solution Filter The Pall QPoint Tap Assembly is considered to be compatible with 70 % alcohol solutions. 4
4.0 Active chlorine solution (5 ppm) Three s were immersed in a 5 ppm active chlorine solution for hours at room temperature. The duration of immersion was based on a theoretical 0 minute disinfection annually over a 5 year period. changes in were observed and there were no visible particulates in the test solution. Function of the was confirmed by successful connection and of a Filter Capsule 90 times*. The was subsequently installed on a tap fitted with an appropriate Quick Connect Adaptor and a Filter Capsule connected according to instructions for use. leaks were observed at the connection between the tap outlet and the or at the connection between and Filter Capsule when flow was initiated (Table ). Table. Chemical compatibility of the QPoint Tap Assembly in a 5 ppm active chlorine solution for hours in 5 ppm active chlorine solution of 5 ppm active chlorine solution Filter The Pall QPoint Tap Assembly is considered to be compatible with 5 ppm active chlorine solution. 5.0 Conclusions Pall QPoint s Tap Assembly are compatible with 0.5 % quaternary ammonium solutions, 70 % alcohol solutions or 5 ppm active chlorine solution for surface disinfection. Pall Corporate Headquarters 5 Harbor Park Drive Port Washington NY 050 (877) 67-755 phone pouwater.us@pall.com email Pall International Sàrl Avenue de Tivoli 700 Fribourg Switzerland +4 (0)6 50 5 00 phone LifeSciences.EU@pall.com email Visit us on the Web at www.pall.com/qpoint International Offices Pall Corporation has offices and plants throughout the world in locations such as: Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, India, Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand, rway, Poland, Puerto Rico, Russia, Singapore, Spain, Sweden, Switzerland, Taiwan, Thailand, the United Kingdom, the United States, and Venezuela. Distributors in all major industrial areas of the world. The information provided in this literature was reviewed for accuracy at the time of publication. Product data may be subject to change without notice. For current information consult your local Pall distributor or contact Pall directly. 05 Pall Corporation. Pall, and QPoint are trademarks of Pall Corporation. indicates a trademark registered in the USA. TM indicates a common law trademark. Pall Filtration Pte Ltd. Science Park Road, #05-09/5 East Wing, The Capricorn Singapore Science Park II, Singapore 758 +65 689 6500 phone sgcustomerservice@pall.com email QPoint - More than Filtration 9/5, PDF, GN5.9806.78a