HEARING PROTECTION. In This Section: Earplugs Disposable Earplugs Reusable Earplugs Metal Detectable. Earmuffs/Headsets Electronic 08-01

Transcription

1 HEARING PROTECTION In This Section: Images courtesy of Howard Leight by Honeywell Scott Safety M Earplugs Disposable -0 Earplugs Reusable -09 Earplugs Metal Detectable -11 Earmuffs -12 Earmuffs/Headsets Electronic

2 STANDARDS In Australia and New Zealand one of the major areas of compensation is industrial hearing loss. It is a very debilitating loss for a person to experience. Yet industrial hearing loss is completely avoidable. Today, the range of hearing protectors available will ensure a comfortable solution for the individual and the task at hand. AS/NZS 19.0: AS/NZS 19.1: AS/NZS 19.2: AS/NZS 19.: AS/NZS 19.: Occupational noise management Overview and general requirements Occupational noise management Measurement and assessment of noise Occupational noise management Noise control management Occupational noise management Hearing protector program Occupational noise management Measurement and assessment of noise immission and exposure Standard AS/NZS 19.0: provides an overview of the general requirements for occupational noise management. The series deals with noise as it affects hearing, but does not deal with other effects of noise. It also provides an integrated approach to establishing, implementing and evaluating an occupational noise management program. AS/NZS 1270:2 Acoustics Hearing protectors This Standard specifies requirements for the design, materials, and performance of conventional hearing protectors. It also provides guidance on the general requirements for, and the physical and acoustic testing of, specialist hearing protectors. Under Standard AS/NZS 1270 hearing protectors are tested across a range of noise frequencies where a SLC80 rating is mathematically calculated. The results are stated as which is determined by the SLC80 rating obtained. The test results are found on the packaging of the hearing protector. THE CLASS SYSTEM nder the Standard AS/NZS 1270, there is a classification method for the selection of hearing protectors. Once the extent of the noise ha ard has been determined by a noise level survey, the user simply applies this to the classification table below to select an appropriate hearing protector. The class system is a simple way to select a hearing protection appropriate to the noise exposure. Average Exposure db(a) Over 8 Hours Range 1 Less than to to less than 9 1 to 17 9 to less than 18 to 21 to less than to 2 10 to less than 110 or Greater What Is SLC80? S C stands for Sound evel Conversion; it is a rating defined as the difference between the sound level of the environment in which the hearing protection device is worn, and the sound level reaching the wearer s ears. The SLC value includes a correction to ensure that the stated degree of noise reduction is obtained on 80% of occasions hence the SLC80 rating. For example, the sound level in a workplace is 10dB(A) (as an average over an 8 hour period). The target in ear noise level is 80dB(A). To calculate the minimum SLC80 rating required for a hearing protector in this workplace would be; 10dB(A) 80dB(A) = 2 The result of 2 indicates that a SLC80 2dB(A) rated hearing protector is required which, based on the table above corresponds to a. -02

3 UNDERSTANDING CROSS SECTION OF THE EAR Injuries Are Lifelong The human ear is designed to pick up natural sounds. Many workplace processes and applications can generate noise levels that are potentially harmful to hearing. When the tiny sensory hair cells are repeatedly exposed to excessive doses of noise, they break. The surviving sensory hair cells can only process a fraction of the usual information transfer, thus leading to permanent hearing damage. Bone Conduction Paths Semicircular Canals Pinna Middle Ear Audio Nerve Inner Ear Air Conduction Paths Cochlea Ear Canal Bone Eardrum Normal ear showing an electron micrograph of tiny sensory hair cells that are responsible for processing sound vibration into meaningful information. Damaged ear showing an electron micrograph of tiny sensory hair cells broken as a result of repeated exposure to loud noise resulting in permanent hearing loss. UNDERSTANDING EAR PROTECTION Middle Ear Ossicles Cartilage Oval Window with stapes attached Eustachian Tube Outer Ear EASY TO DAMAGE EASY TO PROTECT % USAGE amage to hearing depends not only on the actual noise level but also exposure time. Just five minutes of carelessness during an eight-hour day can potentially lead to lifelong hearing loss. That s why % usage is critical in noisy environments if you are to get the adequate protection from your chosen hearing protector. Choose a comfortable hearing protector that suits your needs. % usage. 99% usage. 90% usage. Gives the expected protection Just five minutes carelessness per day significantly reduces the effect of the hearing protector Virtually no protection Courtesy of M -0

4 USE AND CARE Disposable Earplugs How to use Slowly roll and compress foam earplugs into a very thin cylinder. While compressed, insert the earplug well into the ear canal.fitting is easier if you reach around the head to pull the ear outward and upward during insertion. Care and cleaning Keep the earplugs clean and free from material that can irritate the ear canal. Reusable Pre Moulded Earplugs Reach around the back of your head and pull upward on the ear while inserting the plug until you feel it sealing. This may seem tight at first, especially if you have never worn earplugs. Pre-moulded earplugs could last several months depending on the type and on your work environment, hygiene and body chemistry. They should be replaced if they shrink, harden, tear, crack or become permanently deformed. Wash them in warm soapy water and rinse well. When dry, store them in a carrying case. Banded Earplugs Hold the large ends of the pods and swivel them to direct the tips into the ear canal openings. Firmly push and wiggle the pods into the ear canal until a snug seal is obtained. Pulling on the outer ear while pushing the pods will be helpful to most wearers. Most semi-aural hearing protectors can be cleaned in the same way as pre-moulded earplugs. Since the band holds the tips in place to provide an acoustic seal, do not tamper with it otherwise the protection afforded by the device may be reduced. Earmuffs Earmuffs must fully enclose the ears to seal against the head. Adjust the headband so cushions exert even pressure around the ears to get the best noise reduction. Pull hair back and out from beneath the cushions. Do not wear caps, store pencils behind the ear or anything that may break the seal. Cushions can be cleaned with warm soapy water and rinsed thoroughly. Do not use alcohol or solvents. Cushions normally need replacing at least twice a year or more whenever they become stiff, cracked, or do not seal. Do not modify earmuffs in any way, and especially do not stretch or abuse the headband as this will reduce protection. Courtesy of M -0

5 E-A-RSoft FX Earplugs E-A-RSoft Superfit Earplugs s Shaped to fit the ear canal more effectively s Flanged end, single size polyurethane 10 to 110dB(A): s Rated SLC80 db(a): s High attenuation level s Non-allergenic and non-irritating s Earplug is fitted correctly when red band is no longer visible s Self-adjusting polyurethane foam to 10dB(A): s Rated SLC80 2dB(A): regular large regular Skull Screws Earplugs E-A-R ic Platinum Earplugs s High attenuation level s Twist, screw insertion for an easy fit s No touch insertion no contamination on the plug from dirty fingers s Universal fit, no different sizes required s Grip rings ensure plug stays in the ear canal 10 to 110dB(A): s Rated SLC80 27dB(A): s High attenuation level s Non-allergenic and non-irritating s Small design to suit smaller ear canals s Self-adjusting Polyvinyl Chloride (PVC) foam s Flame retardant to 10dB(A): s Rated SLC80 2dB(A): in pillow pack 2 in poly bag Disposable Earplugs P100 P E-A-R Taperfit 2 Earplugs s Non-irritating s Tapered shape preferred by many wearers s Plus size option for larger ear canals s Polyurethane foam s Comfortable and convenient 10 to 110dB(A): s Rated SLC80 db(a): regular large E-A-R ic Earplugs s High attenuation level s Non-allergenic and non-irritating s Self-adjusting Polyvinyl Chloride (PVC) foam s Flame retardant s Medium to high noise environments s Suitable for use in noise levels to 10dB(A): s Suitable for use in noise levels 9 to db(a): s Rated SLC80 2dB(A): s Rated SLC80 21dB(A): in pillow pack 2 in poly bag 2 in poly bag To order, call or log on to -0

6 E-A-R One-Touch Dispenser Personal Noise Indicator s Ideal for placing at entrances to high noise work environments s Convenient way of storing hearing protectors in the workplace s Gives control over issues such as waste, excess packaging, mess and related costs s No waste funnel system ensures plugs drop directly into the palm s Simple to use twist motion s Refill sold separately to 10dB(A): s Superfit Rated SLC80 2dB(A): s ic Rated SLC80 2dB(A): s Alerts users to potentially dangerous noise levels, helping identify areas where hearing protection may need to be worn s Simply clips onto a shirt or jacket s LED delivers a clear indication of noise levels; flashes red when =/> 8dB(A) and flashes green when < 8dB(A) s Rechargeable Lithium-poly battery with approximately hours of operating before recharging s Lightweight and durable - made of polycarbonate s Mini USB cable (sold separately) charges noise indicator through USB port on computer s Suitable for workers in highly variable noise environments s Effective training tool within a noise management program Dispenser base Refill uncorded ic Platinum earplugs Refill uncorded ic Superfit 0 earplugs Refill uncorded Superfit earplugs Noise Indicator s No roll down required, preventing possible contamination of ear plug s Quick, clean and hygienic s Medium noise environments 9 to db(a): s Rated SLC80 19dB(A): NI- NI-CHG Noise indicator Mini USB cable charger Mini USB Cable Charger M Noise Indicator NI- is a personal noise monitor that reminds workers when to wear hearing protection. The M Noise Indicator alerts users to potentially dangerous noise levels, helping identify areas where hearing protection may need to be worn. Users simply clip the Noise Indicator to a shirt or jacket; its LED delivers a clear indication when noise levels exceed a potentially hazardous threshold. E-A-R Express Earplugs Red flashing D indicates noise levels are equal to or above 8dB(A) hearing protection may be required reen flashing D indicates noise levels are below 8dB(A) hearing protection may not be necessary Its small size and lightweight design make it ideal for workers in a variety of industries. With a rechargeable battery that operates for up to hours between charges, it s an economical investment for use in an employee hearing awareness program. M Tri-Flange Earplugs E-A-R Optime Sound Check Meter s Soft, flexible flanges s Plastic LiveWire stem s Conforms to the shape of the ear canal s Forms a triple level noise seal s Quick, clean and optimal insertion s Medium noise environments 9 to db(a): s Rated SLC80 19dB(A): s Accurate measurement of average noise level to assist in gauging the class of hearing protection required s Measures the sound level during a full work shift and then calculates an 8-hour time weighted average s Accurate to within 1dB s Colour coded for easy interpretation no more over or under protecting s Easy to use s Suitable for use in all industries requiring hearing protection P Disposable Earplugs/Noise Meters Cloth corded

7 X-treme Earplugs Max-Lite Earplugs s Brightly coloured offering high visibility and worker compliance s Smooth, tapered shape for easy insertion and removal s Wall dispenser unit allows a refillable option for the whole work area 10 to 110dB(A): s Rated SLC80 db(a): s Ideal for workers with smaller ear canals s Low pressure foam expands gently for comfortable long term wear s Contoured T-shape for easy handling and wear -10dB(A): s Complies with AS/NZS 1270:2 s Rated SLC80 2dB(A): XTR-1 XTR-0 XTR-LS LS-00 dispenser refill Dispenser only (holds 00 pairs) LPF-1 LPF-0 LPF-LS LPF-1-D LS-00 LS-00 dispenser refill dispenser refill Dispenser only (holds 00 pairs) Dispenser only (holds 00 pairs) Pro-Soft Earplugs s High attenuation level s Non-allergic and non-irritating s Polyurethane foam s Self-adjusting foam -10dB(A): s Rated SLC80 2dB(A): Max Earplugs s Bell shape delivers maximum comfort s Improved design is easier to insert, reducing tendency to back out of ear s Smooth, soil resistant skin prevents dirt build-up 10 to 110dB(A): s Rated SLC80 db(a): MAX-1 MAX-0 MAX-LS MAX-1-D LS-00 LS-00 in poly bag in poly bag dispenser refill dispenser refill Dispenser only (holds 00 pairs) Dispenser only (holds 00 pairs) 00 s When rolling and fitting of earplugs is problematic s Inserts easily into your ear with a simple fingertip twist of the navigation stem for a quick, snug and comfortable fit to 10dB(A): s Rated SLC80 2dB(A): dispenser refill 2 Dispenser only (holds 00 pairs) Earplug Dispensers 00 Pair Earplug Dispenser LS-00 s Ideal for small workshops or areas where one or more dispensers are required s Mounts to wall, or stands alone as a table top dispenser with balanced footing s Twist knob to dispense earplugs s Handy catch tray for stray plugs s Suitable for use with Max, X-treme, Max Lite, Laser Lite, Multi Max and 00 series 00 Pair Earplug Dispenser LS-00 s Ideal for large factories and process industries that have zero tolerance for packaging waste s Heavy duty anodised aluminium construction withstands constant use s Mount on wall for easy access s Crank handle to dispense earplugs s Suitable for use with Max, Max Lite, Laser Lite and 00 series s Suitable for use with the Prosafe Pro-Soft dispenser refill (EPPSRB00) Pilot Hybrid Push-In Earplugs PLT-1 PLT-0A EPPSR EPPSRC EPPSRB00 LS-00 Disposable Earplugs LS-00 LS-00 Dispenser only (holds 00 pairs) Dispenser only (holds 00 pairs) LS-00 LS-00 To order, call or log on to -07

8 Disposable Earplugs WHAT IS VERIPRO? SparkPlugs Earplugs VeriPRO is a testing technology that makes it easy to get an accurate real world picture of the attenuation that an employee is receiving from their earplugs. s Made from extra soft foam s Every package reveals two different colour plugs s Bright colours for easy compliance checks 10 to 110dB(A): s Rated SLC80 db(a): hy is such a test necessary Whilst the SLC80 rating is a good indicator of the performance of a given earplug, this assumes a good fit. VeriPRO answers the age-old question: How do I know if the earplug is fitted properly By verifying earplug effectiveness and providing an opportunity for education, VeriPRO becomes an integral part of a successful Hearing Conservation Programme. ow does eri R wor VeriPRO is software which is installed on a PC or aptop. It utilises headphones connected to the computer by USB. The headphones are used to test the users hearing both before, and after the fitting of their earplugs, and provides an assessment of the overall attenuation achieved by the wearer of the earplug, which determines the fit of the product. KEY FEATURES UÊ The test may be conducted on any brand of earplug; including custom products. UÊ If poor fitting results are obtained, the program can run a 0 second training video on the specific ear plug and give the opportunity to try the test again. Studies have shown that individual training is the most effective means of improving earplug attenuation. UÊ It produces a report which can be stored in the employees human resources file to provide evidence that regulatory training requirements of properly fitting earplugs has been completed. UÊ The test does not require a sound proof booth for testing to be performed. UÊ It can be used with employees who have existing hearing loss Pura-Fit Earplugs s Tapered for easy insertion s Longer length for easy fitting and removal s Soft foam is non-irritating and smooth s Bright green colour for easy compliance checks 10 to 110dB(A): s Rated SLC80 27dB(A): s Rated SLC80 db(a): VeriPRO Hearing Testing Kit s Portable testing device that can measure actual hearing attenuation levels s Works with earplugs from any manufacturer s Creates and stores employee Personal Attenuation Rating (PAR) s Provides employees with training on earplug fitting s Sophisticated, user-friendly software s Suitable for any industry that requires on-site hearing conservation program, testing and training PlugStation Dispenser s Available with uncorded SparkPlugs or Pura-Fit earplugs s High visibility dispenser s Eliminates messy paper/poly packaging s Mounting bracket included 10 to 110dB(A): s SparkPlugs Rated SLC80 db(a): s Pura-Fit Rated SLC80 27dB(A): 66A VERIPRO A 66A 68A 68A PlugStation with SparkPlugs PlugStation with SparkPlugs PlugStation with Pura-Fit plugs PlugStation with Pura-Fit plugs A

9 Reusable Earplugs E-A-R Push-Ins with Grip Rings Earplugs E-A-R Ultrafit 27 Earplugs s Pistol grip angled stem easier to fit, with improved protection s New patented polymer formulation making the triple flange more comfortable s Reusable and washable to 10dB(A): s Rated SLC80 22dB(A): E-A-R Swerve Banded Earplugs E-A-R Ultrafit Earplugs s Three piece band slides forward and back for custom neck and ear positioning s Supplied with 1 x pair 20-1 Comfort Pods (fits inside the ear opening) and 1 x pair 20-1 Flex 28 tips (fits inside the ear canal) s Replacement tips sold separately s Comfort Pods: Suitable for use in noise levels to 10dB(A): s Flex 28 Tips: Suitable for use in noise levels 9 to db(a): s Rated SLC80 2dB(A): s Rated SLC80 20dB(A): s Comfortable and non-irritating s Instant use no roll down required s Triple flange design is washable and reusable s Medium noise environments 9 to db(a): s Rated SLC80 18dB(A): Band with comfort pods and flex 28 tips 2 Replacement comfort pods 2 Pack Size 10 0 pairs in case in poly bag E-A-R EZ-Ins Earplugs E-A-Reflex Banded Earplugs s Non roll down for easier insertion and less chance of dirt transfer into ears s Soft with flexible tip and contoured to fit most ear canals s Reusable and washable s Medium noise environments 9 to db(a): s Rated SLC80 20dB(A): s Worn over the head, under the chin and behind the neck s Economical and lightweight alternative to earmuffs s Semi-insert hearing protection s Tapered pods are washable, replaceable, hygienic and dielectric s Hinged headband twists to provide multiple, custom-fit wearing positions s Low noise environments 90 to 9dB(A): 2 s Rated SLC80 1dB(A): Band with ear pods Replacement ear pods Pack Size 10 0 pairs s Non roll down for easier insertion and less chance of dirt transfer into ears s Universal fit no different sizes required s Rings designed to hold plugs in position s Plugs sit in ear canal with minimal movement 10 to 110dB(A): s Rated SLC80 db(a): To order, call or log on to -09

10 Airsoft Multiple Use Earplugs Rockets Reusable Earplugs s Advanced air pocket design creates an interlocking noise-blocking barrier s Provides dependable attenuation for all wearers with correct insertion s Four flange profile means less pressure inside the ear canal, eliminating that plugged up feeling s Increased comfort, especially for long term wear s Improved handling facilitates easier insertion/removal from the ear canal 10 to 110dB(A): s Rated SLC80 db(a): s Earplugs can be washed and reused s Easy grip handle allows for easy insertion s Air bubble tip provides cushioned comfort s Each pair comes with Pocket-Pak carrying case providing hygienic storage of plugs between uses, except model 61 s Metal detectable earplug features a metal detectable cord to 10dB(A): s Rated SLC80 2dB(A): AS-1 AS-0R DPAS-0R DPAS-0W with case (red poly cord) with case (red poly cord) (white nylon cord) Metal Detectable metal detectable Smartfit Reusable Earplugs s Material adapts to the ear canal for comfort and longer use s Easy insertion and removal s High visibility for compliance checks s Available with a HearPack storage case (SMF-0) for long term use s Easy to clean using soap and water s Low to medium noise environments s SMF-0A Suitable for use in noise levels 9 to db(a): s SMF-0W-PA Suitable for use in noise levels 90 to 9dB(A): 2 s SMF-0A Rated SLC80 20dB(A): s SMF-0W-PA Rated SLC80 16dB(A): 2 SMF-0A Detachable corded with HearPack case SMF-0W-PA QB2HYG Banded Earplugs Jazz Band Earplugs s Patented band design prevents ear pods from touching contaminated surfaces s Soft pads rest partially in the ear for a balance of protection and comfort s Lightweight and portable s Replacement ear pods available s Medium noise environments 9 to db(a): s Rated SLC80 21dB(A): s Improved with 0% less band pressure s Cooler, lighter alternative to earmuffs s Banded style, cool in hot conditions s Breakaway neck cord allows band to hang around neck s Replacement pods and neck cord available s Medium noise environments 9 to db(a): s Rated SLC80 18dB(A): QB2HYG QBHYG -10 Reusable Earplugs Neckband with ear pods Replacement ear pods Pack Size 10 0 pairs Neckband with ear pods & neck cord Replacement ear pods & 1 neck cord Pack Size 10 pairs

11 Metal Detectable Earplugs Laser Trak Single Use Metal Detectable Earplugs E-A-RSoft Metal Detectable Earplugs 2 s Non-ferrous metal and bright colour are easily detected by visual and automated inspections s Metalised polycord is detected by automated inspections and prevents earplugs from falling into sensitive production lines s Self-adjusting foam expands to fit virtually any wearer to 10dB(A): s Rated SLC80 2dB(A): LT E-A-R Ultrafit Metal Detectable Earplugs s Non-food blue colour for easy detectability s Instant use no roll down required s Comfortable and non-irritating s Triple flange design is washable and reusable s Medium noise environments 9 to db(a): s Rated SLC80 18dB(A): Smartfit Multiple Use Metal Detectable Earplugs s Simplifies inventory control a single product fits almost every wearer s Blue colour for high detection and visibility s Detectable stem ring and attached metalised cord is detectable by automated equipment s Delivers superior comfort and fit s Multiple use, can be used for weeks s Low noise environments 90 to 9dB(A): 2 s Rated SLC80 16dB(A): SDT-0A s Excellent attenuation s Maximum comfort s Both plug and cord are metal detectable, ideal for food processing and other environments where detection is required to avoid product contamination s Polyurethane foam to 10dB(A): s Rated SLC80 2dB(A): PROTECTOR ALSAFE PUBLICATIONS Contact us for a copy of the latest product and services releases from Protector Alsafe ACE SAFETYSpotlight &EJUJPO CATALOGUE 6/*/( 61 )& )&" 0/ "'&: 80,8&" SEE INSIDE FOR NEW RANGES OF: High Visibility Polo Shirts Polar Fleece Jacket s Two Tone Parka s High Visibility Pullov ers VNNFS 8PSLXFBS IF MBUFTU JO UIF )BSE :BLLB,PPMHFBS SBOHF +PIO #VMM SFWFBMT UIFJS "DUJWF SBOHF,FFQJOH :PVS $PPM JO UIF )FBU Phone JQT PO BWPJEJOH IFBU TUSFTT 1SPEVDUT UP LFFQ ZPV IZESBUFE 1SPUFDUJPO 6OEFS UIF VO %POµU CFDPNF B TUBUJTUJD MJQ MPQ MBQ * Image courtesy of Hard Yakka. Model is wearing Koolgear shirt (style 07790) A NEW VISIO PH: N IN FACE & EYE PROTECTION 219_ACE_W inter_catalogu e_2011_v.in Model wears Armadillo dd 1 oral safe.com.au Complete clear faceshield or visit us online at to view and download all our publications To order, call or log on to -11

12 Earmuffs SECURE S Series Earmuffs s Colour coding allows easy identification and performance selection: SECURE Series (green) s Comfortable, ergonomic design s Soft, wide ear cushions with Smart snap-in system s Smooth, telescopic fitting adjustment s Slim stirrup design increases stability and reduces risk of snagging s Dielectric and non-conductive Earmuff s Soft, wide head cushion for increased comfort and wear time Helmet Attached Earmuff s Post is molded with a slide track for fitting a Protector visor holder s 2mm Adaptor post for fitting to Protector brand safety helmets Neckband Earmuff s A perfect solution when you need hearing protection in conjunction with other Personal Protective Equipment (PPE) s Compact, coated, sprung stainless steel neckband 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model Helmet Attached EHS ECS ENBS EXCSA12 EXKITS EX-VAK S S Helmet attached S Neckband Sweat pads Visor attachment kit Neckband SECURE S2 Series Earmuffs s Colour coding allows easy identification and performance selection: SECURE Series 2 (yellow) s Comfortable, ergonomic design s Soft, wide ear cushions with Smart snap-in system s Smooth, telescopic fitting adjustment s Slim stirrup design increases stability and reduces risk of snagging s Dielectric and non-conductive s SECURE 2 is available in a high-vis or visor combination option Earmuff s Soft, wide head cushion for increased comfort and wear time Helmet Attached Earmuff s Post is molded with a slide track for fitting a Protector visor holder Hi-Vis s 2mm Adaptor post for fitting to Protector brand safety helmets Neckband Earmuff s A perfect solution when you need hearing protection in conjunction with other Personal Protective Equipment (PPE) s Compact, coated, sprung stainless steel neckband 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model Helmet Attached EHS2 EHS2-HIVIS ECS2 ENBS2 ENBS2-HIVIS EXCSA12 EXKITS12 EX-VAK S2 S2 hi-vis S2 Helmet attached S2 Neckband S2 Neckband hi-vis Sweat pads Visor attachment kit Neckband SECURE S1 Series Earmuffs s Colour coding allows easy identification and performance selection: SECURE Series 1 (blue) s Comfortable, ergonomic design s Soft, wide ear cushions with Smart snap-in system s Smooth, telescopic fitting adjustment s Slim stirrup design increases stability and reduces risk of snagging s Dielectric and non-conductive Earmuff s Soft, wide head cushion for increased comfort and wear time Helmet Attached Earmuff s Post is molded with a slide track for fitting a Protector visor holder s 2mm Adaptor post for fitting to Protector brand safety helmets Neckband Earmuff s A perfect solution when you need hearing protection in conjunction with other Personal Protective Equipment (PPE) s Compact, coated, sprung stainless steel neckband to 10dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model -12 Neckband Helmet Attached EHS1 ECS1 ENBS1 EXCSA12 EXKITS12 EX-VAK S1 S1 Helmet attached S1 Neckband Sweat pads Visor attachment kit

13 EH12 Series Earmuffs EH8 Series Earmuffs s Colour coded for easy performance identification (green) s Earmuff arm attaches at a central pivot point distributing even clamping pressure s Reversible cups allow convenient and comfortable park position around the neck when not in use s Sliding adjustment for correct and comfortable fit s earmuff patented twin top headband design ensures constant performance and correct sealing pressure s Helmet attached earmuff allows stand off the ear, ready to be used position 10 to 110dB(A): s Rated SLC80 db(a): s Helmet attached Rated SLC80 1dB(A): s Colour coded for easy performance identification (blue) s Earmuff arm attaches at a central pivot point distributing even clamping pressure s Reversible cups allow convenient and comfortable park position around the neck when not in use s Sliding adjustment for correct and comfortable fit s earmuff patented twin top headband design ensures constant performance and correct sealing pressure s Helmet attached earmuff allows stand off the ear, ready to be used position to 10dB(A): and 10 to 110dB(A): s Rated SLC80 2dB(A): s Helmet attached Rated SLC80 27dB(A): Helmet EC attached Sweat pads EXCSA pack 20 pads EXCSA Sweat pack EXKIT EH12 Helmet Attached EH8 2 Helmet EC82 27 attached Sweat pads EXCSA20 pack 20 pads EXCSA Sweat pack EXKIT Helmet Attached EMLU60 Earmuffs s Colour coded for easy performance identification (yellow) s Earmuff arm attaches at a central pivot point distributing even clamping pressure s Reversible cups allow convenient and comfortable park position around the neck when not in use s Sliding adjustment for correct and comfortable fit s earmuff patented twin top headband design ensures constant performance and correct sealing pressure s Helmet attached earmuff allows stand off the ear, ready to be used position 10 to 110dB(A): s Rated SLC80 28dB(A): s Helmet attached Rated SLC80 0dB(A): s Economical choice providing protection for high volume users s Earmuff arm attaches at a central pivot point distributing even clamping pressure s Sliding adjustment for secure and comfortable fit s Soft, replaceable cushion (EXHGK60) designed for harsh and humid conditions s General light industrial applications 10 to 110dB(A): s Rated SLC80 db(a): Helmet EC attached pads EXCSA20 Sweat pack 20 Sweat pads EXCSA pack EXKIT EH10 Series Earmuffs Earmuffs EH10 Helmet Attached EMLU60:BL earmuff CHOOSING Hearing protection should be worn % of the time when exposed to harmful noise. The earmuff you choose, should be comfortable to wear, and result in a sound level around 7-80dB(A) inside the ear cup. Greater attenuation may lead to a feeling of isolation or not hearing alarm signals and communication. The Protector range of earmuffs utilise a colour coding system to assist in identifying the level of attenuation offered. To order, call or log on to -1

14 Earmuffs SECURE Earmuff & Visor Combination s SECURE Series 2 (yellow) headband earmuff and visor combination s Stays firmly in place and can be lifted into the not in use position with one hand s Polycarbonate visor ideal for high impact protection s Nylon mesh visor provides protection against large dust particles and abrasion (additional safety eye protection should be worn beneath the visor) 10 to 110dB(A): s For use where both hearing and face protection is required s Rated SLC80 db(a): s All visors and holders are approved to AS/NZS 17:1992 with the exception of mesh visors. This standard does not require mesh visors to be tested. Mesh visors recommended for low impact only Scott Safety has been manufacturing and designing the Protector brand of personal protective equipment in Australia and New Zealand for over 70 years. The Protector brand places a strong emphasis on research and development and is continually developing new solutions to increasingly complex personal protection problems. Solutions that provide better protection, worker comfort and greater productivity for all your safety needs. The Protector brand range of hearing products are compatible with Protector brand head, eye and face products. Combine your various Protector brand personal protective equipment e.g. head, face and hearing protection as a certified combination under AS/NZS Standards. he rotector brand in Australia is distributed exclusively by rotector Alsa e. Mesh Visor Combination Polycarbonate Visor Combination EHFS2-P EHFS2-NMV EX-VAK EXCSA12 EXKITS12 SECURE 2 earmuff with polycarbonate visor SECURE 2 earmuff with nylon mesh visor Visor attachment kit Sweat pads Head Protection Page 06-0 Earmuff & Visor Combination s EH10 Series headband earmuff fitted with either a detachable nylon mesh or polycarbonate visor s Clip on visor attachment for multiple use and easy replacement s Rotating visor attachment arms allow lift up/down as a one hand operation s Polycarbonate visor ideal for high impact protection s Nylon mesh visor provides protection against large dust particles and abrasion (additional safety eye protection should be worn beneath the visor) 10 to 110dB(A): s For use where both hearing and face protection is required s Rated SLC80 28dB(A): s All visors and holders are approved to AS/NZS 17:1992 with the exception of mesh visors. This standard does not require mesh visors to be tested. Mesh visors recommended for low impact only Polycarbonate Visor Combination EHF10PF EHF10MY EXCSA20 EXCSA EXKIT810-1 CERTIFIED PERSONAL PROTECTIVE EQUIPMENT (PPE) COMBINATIONS Earmuff with polycarbonate visor Earmuff with nylon mesh visor Sweat pads pack 20 Sweat pads pack Mesh Visor Combination Face Protection Page 06-1 ye rotection Page 07-0 Hearing Protection Page -12

15 Peltor H10 Extreme Performance Series Earmuffs Peltor H9 Select Performance Series Earmuffs s Double casing minimises resonance and provides maximum low-frequency attenuation s Broad sealing rings s Stainless steel headband wires with four point suspension help distribute cushion pressure evenly s Generous inside depth helps the ears to rest comfortably s Soft liquid foam-filled ear cushions provide added comfort 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model s Suitable for short and long duration tasks s Low profile and light s Stainless steel headband wires with four point suspension help distribute cushion pressure evenly s Generous inside depth helps the ears to rest comfortably s Soft liquid foam-filled ear cushions provide added comfort to 10dB(A): s Rated SLC80 2dB(A): H10A H10B H10PE H10PG HY10 Neckband Helmet attachment (0mm blade) Helmet attachment (2mm blade) H9A H9B H9PE H9PG HY 2 Neckband 2 Helmet attachment (0mm blade) 2 Helmet attachment (2mm blade) Helmet attachments vary depending on the helmet. Helmet attachments vary depending on the helmet. Peltor H7 Deluxe Series Earmuffs Peltor H6 Low Profile Series Earmuffs s Developed for noisy environments with increased low frequency attenuation s Low profile and light s Stainless steel headband wires with four point suspension help distribute cushion pressure evenly s Generous inside depth helps the ears to rest comfortably s Soft liquid foam-filled ear cushions provide added comfort 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model s Engineered for high comfort and continuous wear s Low profile and light s Stainless steel headband wires with four point suspension help distribute cushion pressure evenly s Ear cups pivot for consistent fit s Foam sealing rings provide quality noise seal with low pressure to 10dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model Earmuffs H7A H7B H7F H7PE H7PG HY7 0 Neckband 28 Folding headband 1 Helmet attachment (0mm blade) 0 Helmet attachment (2mm blade) Helmet attachments vary depending on the helmet. The Peltor range of earmuffs incorporates all the acoustic engineering, wearer-focused design, and performance versatility that have made Peltor the leading name in earmuff protectors for over 0 years. Easy to replace hygiene kits with two attenuating cushions and snap-in sealing rings are available for most Peltor earmuff models. Multi-position designs are available for many models in headband, neckband, helmetattachable and folding models to meet virtually every application need and wearer preference. H6A H6B H6F H6PE H6PG HY Neckband Folding headband Helmet attachment (0mm blade) Helmet attachment (2mm blade) Helmet attachments vary depending on the helmet. added wide headband with our point steel suspension band cushions head while suspension distributes consistent pressure throughout the life of the product. Stainless steel construction resists bending and warping. Earcup pivot points allow wearers to tilt and adjust earcups for optimum comfort and efficiency. Liquid & foam filled cushions and broad, soft rings are the ultimate for a better seal (even with eyewear) and better comfort. To order, call or log on to -1

16 Earmuffs ONLINE SOLUTIONS Browse safety products and services at your own convenience, 2 hours a day 7 days a week with Protector Alsafe online. Fast, easy and secure is an easy online solution ready to help with all your safety needs Series Earmuffs s Lightweight hi-vis orange s Durable construction ideal for use in extreme work environments s Design ensures pressure is evenly dispersed promoting day-long use heavy industry, construction and manufacturing 10 to 110dB(A): s Rated SLC80 27dB(A): Peltor Kids Earmuffs 000 Series Earmuffs s Designed to fit smaller head sizes s Easy and comfortable to wear s Low profile and bright colour designs s Low contact pressure s Designed for use by children up to age 7 s Attenuates harmful noises without shutting out other ambient noises s Hearing protection for children s Conforms to EN2-1 (SNR 27dB(A)) s Lightweight hi-vis yellow s Durable construction ideal for use in extreme work environments s Design ensures pressure is evenly dispersed promoting day-long use heavy industry, construction and manufacturing to 10dB(A): s Rated SLC80 2dB(A): H10AK-2-RE H10AK-2-GB earmuff neon pink earmuff neon green PELTOR KID EARMUFFS 110 Series Earmuffs Children s hearing is extremely sensitive and they have very little protection against harmful noise levels. Peltor Kid earmuffs can attenuate harmful noise levels without completely shutting out other ambient sounds. These earmuffs are recommended for use by children up to age seven and are available in two characteristic colours neon pink and neon green for high visibility and fun. s Lightweight hi-vis yellow s Universal design allows multiple fitting positions s Low clamp force for user comfort s Medium noise environments manufacturing 9 to db(a): s Rated SLC80 18dB(A):

17 Earmuffs s Dielectric construction suitable for all workplaces, especially electrical environments s Uniform attenuation allows wearer to hear co-workers, instructions, and other important sounds more naturally while blocking out harmful noise s Snap-fit ear cushion make replacement quick and easy Series available in cup profiles: C1 Low Profile C2 Medium Profile C Broad Profile Earmuff Models: C1/C s Uniform headband pressure for all head sizes, providing better comfort for long-term wear s Inner-ventilated headband minimises pressure on the head, breathes easier in warm/humid climates s Non-deforming outer headband withstands rough treatment in the toughest workplaces Helmet Attached Earmuff Models: C1H/CH s For use with a wide range of hard hats s Earcups snap in place during use and swing back when not in use s Includes pair of hard hat adaptors Folding Earmuff Model: C1F s Convenient folding design for easy storage Multiple-Position Earmuff Model: C2 s Multiple-position headband allows wearer to select positions (over-the-head, behind-the-head or under-the-chin) s Alternative to cap-mounted earmuffs wear with hard hats, face shields, respirators and other Personal Protective Equipment (PPE) s Includes attached elastic headband strap for better positioning when worn behind-the-head or under-the-chin to 10dB(A): and 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model C1 C C1H Helmet attached (adaptors included) CH Helmet attached (adaptors included) C1F Folding C2 Multi position Earmuff pads envelope pairs Earmuff pads dispenser pairs suits C1 series earmuffs suits C2 series earmuffs suits C series earmuffs (C1) (C) Helmet Attached (C1H) Helmet Attached (CH) Folding (C1F) Multi Position (C2) Viking Earmuffs Slim Belt Clip s -Position (over-the-head, behind-the-neck or under-the-chin) headband allows the worker to select a position to best suit their working application s Inner-ventilated headband minimises pressure on the head and breathes easier in warm and humid climates s Features Bilsom patented Air Flow Control technology for better, consistent attenuation s Dielectric construction does not conduct electricity s Snap-in ear cushions make replacement quick and easy 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model s Comfortable and easy to use s Stays securely attached to a belt, waistband or pocket s Slim design lays flat against the body when carrying earmuffs earmuff V1 position earmuff V2 position earmuff V position Earmuff pads envelope pairs Earmuff pads dispenser pairs suits L1 and V1 series earmuffs suits L2 and V2 series earmuffs suits L and V series earmuffs Clarity Series Earmuffs To order, call or log on to -17

18 Earmuffs Leightning Series Earmuffs s Bilsom patented Air Flow Control technology provides better consistent attenuation s Robust design withstands demanding use, especially in tough environments s Snap in ear cushions makes replacement quick and easy s Telescoping height adjustment remains fixed during use Series available in cup profiles: L0 Ultraslim profile L1 Low profile L2 Medium profile L Broad profile High visibility option s Bright green earcups provide additional high visibility and contrast on the job s Reflective padded foam headband material which illuminates under light for increased visibility and safety, especially in low lighting Ultraslim option s Ultraslim, lightweight earcups ideal for lower noise levels s Easy storage when not in use Earmuff Models: L1/L2/L/LHV s Padded foam headband delivers long-wearing comfort with minimal pressure on the head Helmet Attached Earmuff Models: L1H/L1HHV/L2H s For use with a wide range of hard hats s Earcups snap in place during use and swing back when not in use s Includes pair of hard hat adaptors Folding Earmuff Models: L0F/L2F/L2FHV s Convenient folding design for easy storage s Folding earmuff belt case also available Neckband Earmuff Models: L0N/L1N/L2N s Sleek, anatomic behind-the-neck design, for use with face shields, visors, hard hats and other Personal Protective Equipment (PPE) s Includes attached elastic headband strap for better positioning to 10dB(A): and 10 to 110dB(A): s Please refer to the product table for full list of SLC80 ratings and classes for each model (L1) High-Vis (LHV) (L2) Helmet Attached (L1H) L1 L2 L LHV hi-vis L1H Helmet attached (adaptors included) L1HHV Helmet attached hi-vis (adaptors included) L2H Helmet attached (adaptors included) LOF Folding L2F Folding L2FHV Folding hi-vis LON Neckband L1N Neckband L2N Neckband Earmuff pads envelope pairs Earmuff pads dispenser pairs suits L1 and V1 series earmuffs suits L2 and V2 series earmuffs suits L and V series earmuffs Folding High-Vis (L2FHV) Neckband Ultraslim (LON) Folding Ultraslim (LOF) Neckband (L2N)

19 HOWARD LEIGHT EARMUFFS MAINTENANCE AND FITTING WEAR Read and follow all earmuff fitting instructions. Remove all hair under ear cushions. SELECTION Avoid overprotection in minimal noise environments consider noise levels and need to communicate with co-workers or hear warning signals on the job. Folding Clarity C1 Multiple-Position Leightning L0F Place earcups over each ear. Adjust the headband by sliding the headband up or down. MAINTENANCE Regularly inspect earcups and ear cushions for cracks and leaks discard if earcups are visibly damaged or compromised. Clean earcups and ear cushions regularly with mild soap and water. Replace ear cushions and foam inserts every 6 months under normal wear, every months with heavy use or in humid/extreme climates. Viking V Cap-Mounted Clarity CH Neckband Leightning L2N Place the earcups over each ear. Attach adapters to each side of the hard hat by sliding them into the slots. Fold out the earcups as shown. Adjust the headband by sliding the headband up and down. Attach each earmuff into its adapter by sliding the earmuff housing down into the adapter. Adjust the length of the headband strap between the earcups so the earmuff fits well on top of the head. Place earcups over each ear. Multiple-Position earmuffs can be worn either over-the-head, behind-the-head or under-the-chin. Place the hard hat on the head and adjust the earmuffs by sliding the cups up and down. Place earcups over each ear. Adjust the headband by sliding the headband up or down. When the earmuff is worn with the headband behind-the-head or under-thechin, the headband strap must be attached to the slot in the upper part of the earcup as shown. Ensure that the earmuff is firmly attached by lifting the arm up and down. -19

20 Electronic Earmuffs/Headsets TuneUp AM/FM Headset Heading Headset Rad-Com s Stereo sound AM/FM Radio s Sealed Power Circuit Board (PCB) is moisture resistant s MP compatible with interfacing cable supplied s Powered by disposable batteries with 00 hour run time 10 to 110dB(A): s Rated SLC80 0dB(A): s Noisecopy s body suppression microphone enables clear communication subheading Push To Talk (PTT) button on cup s Convenient s bodykit s Arm copy included converts headset to mount on safety helmets subheading s Range of connectors, maximising s body copy 2-way compatibility 10 to 110dB(A): s Suitable where 2-way radios are used and clear communications in noisy environments is required s Rated SLC80 db(a): EEHDRAD EXRHYGKIT EXCSA20 EXCSA TuneUp AM/FM headset Sweat pads pack 20 Sweat pads pack ECHRVB EXKITEC EXCSA20 EXCSA Rad-Com headset Sweat pads pack 20 Sweat pads pack InTouch Active Listening Earmuffs Heading Headset Free-Com s Allows wearer to listen to wanted sound whilst providing protection from noisy environments s Comes complete with two cables and batteries s Two cables allow audio equipment and 2-way radios to be interfaced s Powered by disposable batteries with 00 hour run time 10 to 110dB(A): s Rated SLC80 db(a): s Headset s body copywith in-built battery power source, and boom microphone subheading s Six s bodychannels, copy Voice Activated Transmission (VOX) sensitivity settings and Push To Talk (PTT) operations subheading s Arm included converts headset to mount on safety helmets s bodykit copy s Allows communication up to 1. kilometres / MHz frequency, clear and free to air to 10dB(A): s Environments where person to person communication is required whilst wearing hearing protection production lines, manufacturing, military, road operations s Rated SLC80 2dB(A): EEHDLD EXRHYGKIT EXCSA20 EXCSA InTouch active listening earmuff Sweat pads pack 20 Sweat pads pack ECHFVBA EXKITEC EXCSA20 EXCSA Free-Com headset Sweat pads pack 20 Sweat pads pack Alert Earmuffs s Allows wearer to listen to wanted sound whilst providing protection from noisy environments s Rechargeable battery with charger included s Arm kit (included) converts headset to mount on safety helmets s Charging socket interfaces with audio equipment s Tone control for improved listening comfort 10 to 110dB(A): s Environments where impact noise exists, including heavy fabrication, ship building, manufacturing, military and where close proximity communications is required s Rated SLC80 0dB(A): EEHAAZ EXKITEC EXCSA20 EXCSA -20 Alert earmuff Sweat pads pack 20 Sweat pads pack BRANCH LOCATIONS If you would like to visit the team at Protector Alsafe, there is a branch in every state and territory! Find your nearest Protector Alsafe branch on pages and or online at

21 Peltor Lite-Com lll Headset Peltor Worktunes Plus Headset s Built-in active sound function lets you hear ambient sounds, warning signals, machinery and conversations, while attenuating harmful noise s Built-in 69 channel, 2-way radio using MHz s Noise cancelling microphone for superior speech clarity s LCD display for settings s Optional Voice Activated Transmission (VOX) or Push To Talk (PTT) manual activation of the speech microphone s Push To Talk (PTT) Auxiliary (AUX) for operating externally connected 2-way radio or telephone 10 to 110dB(A): s Designed for people who work in groups and teams where hands free communication is essential s Rated SLC80 1dB(A): s Active sound function lets you hear ambient sounds, conversations, machinery and alarms while attenuating harmful noise s Combines AM/FM radio with electronic listening capability s Adaptable to 2-way radio and MP s Sound limits to 82dB(A) s 20+ hours of battery life s Simple, easy to handle control knobs 10 to 110dB(A): s Rated SLC80 0dB(A): MTH7A0B HY79 Lite-Com III headset Hygiene Kit M2RX7A-0 HY79 WorktunesTM Plus headset 0 Hygiene Kit Peltor WS Bluetooth Headset Peltor Pro-Tac II Headset s Wireless connection to mobile phones or communication radios using Bluetooth technology s High attenuation with optimised acoustic design s Allows you to answer and communicate through your mobile without leaving noisy environments s Electret speech microphone with effective noise compensation 10 to 110dB(A): s Suitable for use in all industries requiring high level hearing protection and the ability to answer mobile phones s Rated SLC80 1dB(A): s Designed to amplify ambient sounds while attenuating harmful noise s Ergonomic three-button control pad s Sound limited to 82dB(A) s Patented stainless steel spring arms designed for durability with minimal temple pressure s Audio input jack for external radios and MP players 10 to 110dB(A): s Environments where person-to-person communication is required whilst wearing hearing protection, including forklift operations, manufacturing, rail yards, and law enforcement s Rated SLC80 0dB(A): MTH7AWS2 HY79 Bluetooth wireless headset Hygiene Kit MT1H7A2-SV HY79 Pro-Tac II headset Hygiene Kit Peltor Headset Peltor SportTac Headset s High attenuating communication headset s Connects to 2-way radio via Push To Talk (PTT) s 2-way noise cancelling microphone for superior speech clarity s Standard J11 connection s Suitable for use with majority of common communications devices 10 to 110dB(A): s Environments where there is a requirement to wear hearing protection and communicate via radio, including construction sites, rail yards, shipyards, road surfacing and timber industry s Rated SLC80 1dB(A): s Active sound function lets you hear ambient sounds, conversations and warning signals, while attenuating harmful noise s Foldable and lightweight (18g) s Audio input jack for external radios and MP players s Adjustable volume control and smooth level dependant function eliminate abrupt sound cut-off s Comfortable to wear for long periods s Automatic shut-off function s (Mfr Code HY21) available on request to 10dB(A): s Rated SLC80 2dB(A): MT7H79A HY79 Peltor headset Hygiene Kit MT16H210F-78-GN SportTac headset 2 Electronic Earmuffs/Headsets To order, call or log on to -21

22 Electronic Earmuffs/Headsets Peltor Worktunes II Headset Hi-Visibility Radio Earmuffs s!- &- RADIO BAND s IMPLE TUNING AND VOLUME ADJUSTMENTS s OUND LIMITS TO D"! s (IGH ATTENUATING SHELLS s 0ROTECTS YOUR HEARING EFFECTIVELY whilst listening to the radio s (YGIENE KIT -FR #ODE n (9 AVAILABLE ON REQUEST s (IGH NOISE ENVIRONMENTS s UITABLE FOR USE IN NOISE LEVELS 10 to 110dB(A): s #OMPLIES WITH!.: s 2ATED,# D"! #LASS s "RIGHT GREEN EARCUPS PROVIDE HIGH VISIBILITY AND CONTRAST s 2EmECTIVE HEADBAND IS HIGHLY VISIBLE UNDER LIGHT s "ILSOM patented Air Flow Control technology provides better consistent attenuation s!uxiliary!8 INPUT CONNECTS TO -0 PLAYERS and other audio devices s 2ADIO VOLUME DOES NOT EXCEED D"! s (YGIENE KIT -FR #ODE n AVAILABLE ON REQUEST s (IGH NOISE ENVIRONMENTS s UITABLE FOR USE IN NOISE LEVELS 10 to 110dB(A): s )DEAL FOR USE DURING NIGHT AND DAY OR low light and inclement conditions s #OMPLIES WITH!.: s 2ATED,# D"! #LASS HRX2A-0-SV-GU WorktunesTM II headset Peltor Push To Listen Earmuffs s /NLY EARMUFF THAT LETS WORKERS LISTEN SAFELY WITHOUT REMOVING EARMUFFS standard earmuffs require lifting or removing the cups, exposing workers to dangerous noise s!bility TO HEAR SPEECH AND safely amplified up to 87dB(A) when required s %XCELLENT NOISE PROTECTION s (IGH NOISE ENVIRONMENTS s UITABLE FOR USE IN NOISE LEVELS 10 to 110dB(A): s #OMPLIES WITH!.: s 2ATED,# D"! #LASS H7A-PTL 0 HY Push To Listen earmuff 27 Hi-vis headband earmuffs with radio Earmuff pads envelope pairs Earmuff pads dispenser pairs HIGH VISIBILITY EARMUFFS In many occupations, workers face the challenge of protecting themselves not only from noise but additional environmental hazards on the job. High-visibility products improve overall employee safety for some outdoor or low lighting environments. Howard Leight Hi-Visibility earmuffs not only feature bright green earcups, but also re ective headbands for additional visual reference Impact Sport Earmuffs Peltor Listen Only Headset s,isten ONLY HEADSET FOR WAY RADIOS PHONES AND AUDIO PLAYERS s $ESIGNED FOR WORKING IN CONSTANT NOISY ENVIRONMENTS s PEAKERS IN BOTH CUPS FOR BALANCED SOUND s TEREO VERSION WITH SOUND LIMITED TO D"! s 6ARIOUS PLUG CONlGURATIONS TO SUIT various applications s!vailable IN VARIOUS HEADBAND configurations s (IGH NOISE ENVIRONMENTS THAT require audio input s UITABLE FOR USE IN NOISE LEVELS 10 to 110dB(A): s (EADSET USED TO PLUG INTO machinery audio jacks s #OMPLIES WITH!.: s 2ATED,# D"! #LASS HTM79A HY Listen only headset Hygiene Kit s!mplifying HEARING PROTECTOR ENHANCES VERBAL COMMUNICATIONS in carrying noise in powerful impulse sound environments s OUND LEVEL LIMITATION WHERE AMPLIlCATION DOESN T EXCEED D"! s LTRASLIM SOUND AMPLIlCATION EARMUFF ENHANCES USER AWARENESS OF ENVIRONMENT allowing wearer to hear important communications s LTRASLIM EARCUP LOW PROlLE DESIGN s "ILSOM patented Air Flow Control technology provides better consistent attenuation s NAP IN EAR CUSHIONS MAKES REPLACEMENT QUICK AND EASY s!uxiliary!8 INPUT JACK CONNECTS TO EXTERNAL -0 players or other audio devices s "ATTERY LIFE UP TO HOURS FROM X!!! BATTERIES (included) shut-off after hours s (YGIENE KIT -FR #ODE n AVAILABLE ON REQUEST s (IGH NOISE ENVIRONMENTS s UITABLE FOR USE IN NOISE LEVELS TO D"! #LASS s #OMPLIES WITH!.: s 2ATED,# D"! #LASS Impact Sport headset Earmuff pads envelope pairs Earmuff pads dispenser pairs