HIGH PERFORMANCE POLYMERS - PART 3

Size: px

Start display at page:

Download "HIGH PERFORMANCE POLYMERS - PART 3"

Lucas Johnston
6 years ago
Views:

HIGH PERFORMANCE POLYMERS - PART 3 Written by Professor Paul Tipton and Dr Bernd Siewert Professor Paul Tipton and Dr Bernd Siewert present a case study using polyether ether ketone (PEEK) for the

ether ketone (PEEK). This material for example can be used successfully for the computer-aided production of long-span, implant-supported restorations.

maxillofacial surgery) for more than ten years. The thermoplastic production procedure ensures that virtually no residual monomers are released.

Several years ago, PEEK was used for the first time in Since September 2012, PEEK blanks for CAD/CAM production are available as well: Juvora Dental Discs (Juvora, Thornton- Cleveleys, UK).

The blanks are sourced from Invibio Biomaterial Solutions that have been successfully used in medical technology for more than a decade.

1 HIGH PERFORMANCE POLYMERS - PART 3 Written by Professor Paul Tipton and Dr Bernd Siewert Professor Paul Tipton and Dr Bernd Siewert present a case study using polyether ether ketone (PEEK) for the production of an implant-supported All-on-Four Today, it is widely believed that highperformance polymers have a great future potential with regard to their use as framework materials in restorative dentistry. While for a long time, they have been exclusively used for temporary restorations, new application options are created due to the availability of innovative, optimised materials such as polyether ether ketone (PEEK). This material for example can be used successfully for the computer-aided production of long-span, implant-supported restorations. MATERIAL PROPERTIES PEEK is an aromatic, semi-crystalline thermoplastic polymer that has been in use as a material for implants in different medical fields (eg in orthopedics and oral and maxillofacial surgery) for more than ten years. The thermoplastic production procedure ensures that virtually no residual monomers are released. Due to its semi-crystalline character, the material remains mechanically stable even in an aggressive environment like the oral cavity. Several years ago, PEEK was used for the first time in dentistry. Since September 2012, PEEK blanks for CAD/CAM production are available as well: Juvora Dental Discs (Juvora, Thornton- Cleveleys, UK). This material is no longer indicated for temporary restorations only. The blanks are sourced from Invibio Biomaterial Solutions that have been successfully used in medical technology for more than a decade. It is specified that the melting point of this material is high for polymers (340 C) and allows repeated sterilisation of frameworks. The modulus of elasticity is similar to that of natural bone. Its flexural strength is 165 MPa, the elongation at break amounts to 40%, meaning that a sample breaks when it is stretched by 40% of its initial length. According to the manufacturer, the consequence is that the material is flexible under load without fracturing - a property that seems beneficial especially from a functional therapeutic perspective. Juvora Dental Discs made from PEEK are recommended for the production of (semi-)removable structures. These include telescope attachments, dentures with precision attachments, claps-retained dentures and implant-supported, screw-retained restorations. CASE STUDY This 67-year-old female patient was referred to us with pain in her lower jaw. She had a DR BERND SIEWERT Dr Bernd Siewert studied at the Christian Albrecht University, Kiel, Germany from 1981 to He spent his two-year assistance time in a practice near Hamburg, Germany. In 1989 he gained a DMD doctorate before moving to Spain where he worked in private practice in Madrid and Malaga. Since 1996 Dr Siewert has his own private practice in Madrid and specialises in implant treatment. Since 2007 he has worked as an instructor at the International Training Center for Dental Implantology (IFZI), Nuremberg, Germany, lectures at a national and international level and is the author of numerous publications. WEBSITE: PROFESSOR PAUL TIPTON BDS MSC DGDP RCS Professor Tipton is an internationally acclaimed Specialist in Prosthodontics who has worked in private practice for more than 30 years. He is the founder of Tipton Training Ltd, one of the UK s leading private dental training academies and the author of over one 100 scientific articles for the dental press. He gained his Master s Degree in 1989 from the Eastman Dental Hospital and London University and started teaching on the University of Manchester s MSc in Restorative Dentistry. He is now Professor of Restorative and Cosmetic Dentistry at the City of London Dental School. His private dental training academy, Tipton Training, was founded in 1991 and to date over 3000 dentists have completed a one year course at the Academy. He practices at his clinics in Manchester, Watford and Harley St. London. WEBSITE: Figure 1: Initial situation Figure 3: The bridge after its removal Figure 2: Situation after removal of the existing restoration Figure 4: Result after extraction of the remaining front teeth and build up of the canines 66

CLINICAL EXCELLENCE Figure 5: Virtual positioning of the implants taking into account the prosthetic possibilities and the

made from chromium cobalt Figure 9: Impression posts in the patient s mouth with transfer key combined fixed and removable

mandible (Figure 1). In addition, she had an asymmetric occlusion (Angle class II).

Figure 3 shows the existing bridge after its removal.

The All-on-4 concept was used in this case.

2 CLINICAL EXCELLENCE Figure 5: Virtual positioning of the implants taking into account the prosthetic possibilities and the anatomical structures Figure 6: The drilling template Figure 7: Model with implant analogs Figure 8: Temporary with framework made from chromium cobalt Figure 9: Impression posts in the patient s mouth with transfer key combined fixed and removable restoration consisting of a cemented metal-ceramic bridge on teeth LL3 to LR3 and a clasp-retained partial denture in the mandible (Figure 1). In addition, she had an asymmetric occlusion (Angle class II). All six remaining lower teeth could not be retained due to caries and advanced periodontitis (Figure 2). Figure 3 shows the existing bridge after its removal. The patient was informed about the treatment options and chose a fixed denture on four implants. The All-on-4 concept was used in this case. This involves the insertion of two anterior implants without angulation, while the 67 two distal implants in the posterior region are placed at an angle to allow for optimal use of the available bone and avoid damaging important anatomical structures (such as the alveolar inferior nerve). In the present case, a minimally invasive implant insertion protocol using a drilling

template was planned. We also aimed at immediate loading of the implants with a metalreinforced composite provisional that had been produced prior to the surgery and was to be screwed on the implants.

The old bridge with the crowns LL3 and LR3 that were isolated inside was used as a template for the build-up.

In this way, it was not necessary to insert three temporary implants with ball heads.

On the basis of the resulting mockup, a radiographic template was produced using material that contains barium sulphate.

3 template was planned. We also aimed at immediate loading of the implants with a metalreinforced composite provisional that had been produced prior to the surgery and was to be screwed on the implants. IMPLANT PLANNING In the first step, the teeth LL2, LR1 and LR2 were extracted. The canines received endodontic treatment and were stabilised with temporary screw in posts and composite (Figure 4). The old bridge with the crowns LL3 and LR3 that were isolated inside was used as a template for the build-up. It was important to temporarily retain the canines since they were to be used for exact intra-oral positioning and safe fixation of the drilling template during guided surgery. In this way, it was not necessary to insert three temporary implants with ball heads. In the next step, a wax set-up was created in order to determine the ideal arch relations and to establish the desired aesthetic appearance of the planned restoration together with the patient. On the basis of the resulting mockup, a radiographic template was produced using material that contains barium sulphate. The template was subsequently positioned in the patient s mouth and a three-dimensional X-ray was taken with Galileos (Sirona Dental, A-Salzburg). The resulting DICOM data set with the radiographic template was imported into the 3D planning software. With the software, the ideal position of the four implants was determined virtually. At this, the planned prosthetic restoration - abutments with an angulation of 0, 17.5 and 35 degrees are available for this purpose - and the anatomical structures were taken into account. Moreover, the implants were positioned in the middle of the alveolar process and an ideal angulation for the distal implants was determined. In general, they should emerge as distally as possible to create the best AP spread. At the same time, the required distance to critical anatomical structures, in this case the mandibular canal, has to be observed (Figures 5-6). Experience suggests that the benefits of the digital workflow in implant planning primarily result from the chance of taking all required decisions regarding implant insertion prior to the surgical intervention. Moreover, a minimally invasive approach that ensures an accelerated healing process, a minimised duration of the operation and reduced post-operative discomfort is possible. In addition, a long-term temporary can be produced in the laboratory prior to the intervention, so that immediate placement is possible. This enables the designing of a more delicate provisional which allows for a better hygiene and control. Last but not least, the total treatment time is drastically reduced. After completion of the virtual planning step, the determined positions for the four implants were transferred to the radiographic template and drilling sleeves were integrated to create a drill guide (Figure 6). PRROVISIONAL RESTORATION In the dental laboratory, four implant analogs were placed in the desired positions on the mandibular model (Figure 7). Afterwards, the provisional was produced on this cast in accordance with the wax up: the framework was made from chromium cobalt and veneered with acrylic polymer (Figure 8). The inner metal framework prevents the denture from fracturing and allows for a more delicate design than possible for bridges without any reinforcement. One of the four screw canals was integrated and used for pre-fixation in the patient s mouth after implant insertion, while the other three canals were closed. The temporary had no distal free-end saddles to avoid overloading during osseointegration of the implants. SURGERY In the clinic the template was positioned on teeth LL3 and LR3. Then, the four implants with 16 mm length and a diameter of 4mm were inserted. Initially, the pilot holes in region LL2 and LR2 were prepared, the template removed Figure 10: Impression taking with an individual tray Figure 11: Model with laboratory analogs and artificial gingiva Figure 12: Digitised master model with laboratory analogs and artificial gingiva Figure 13: Veneers in their desired position 68

Figure 14: Proposed framework design Figure 15: Veneers on the framework Figure 16: Nested framework in the virtual blank Figure 17: Milling path

the preparation process. After implant insertion, the abutments which had an angulation of 35 (implant in region LL5) and 17.

The required chair time for the described procedure of surgery and immediate restoration amounts to approximately two and a half hours.

FINAL RESTORATION After a four-month healing period, an impression was taken for the production of the final restoration.

4 Figure 14: Proposed framework design Figure 15: Veneers on the framework Figure 16: Nested framework in the virtual blank Figure 17: Milling path calculation Figure 18: Milled framework prior to its removal from the blank Figure 19: Lateral view of the finalised bridge and the remaining teeth extracted. Then, the template was repositioned and the pilot drills were inserted again in region LL2 and LR2 in order to fix the templates on them and continue the preparation process. After implant insertion, the abutments which had an angulation of 35 (implant in region LL5) and 17.5 (implant in region LR5) were placed and the provisional fixed. The required chair time for the described procedure of surgery and immediate restoration amounts to approximately two and a half hours. Usually, there are no post-surgery swellings or hematomas. Pain medication is administered during the first 24 hours only. FINAL RESTORATION After a four-month healing period, an impression was taken for the production of the final restoration. For this purpose, the four screws were released and the provisional bridge was removed. Since so far, it is not possible to consistently implement the digital workflow for impression taking, the conventional procedure was adopted. A potential weakness of the available intra-oral scanners lies in the correct matching of single images resulting from the capture of large soft tissue areas. Impression copings were inserted (Figure 9) and a stable transfer key was produced using composite 70

material. The individual, open tray was fitted and an impression taken with a PVS material (Figure 10). The master model was fabricated using polymer to avoid an expansion that is typical for gypsum.

Figure 12 shows the virtual model after digitisation on the screen.

5 material. The individual, open tray was fitted and an impression taken with a PVS material (Figure 10). The master model was fabricated using polymer to avoid an expansion that is typical for gypsum. The laboratory analogs were also fixed on the model with a torque of 12 Ncm. On the complete arch, artificial gingiva was placed in order to ensure an error-free scanning of the analogs (Figure 11). Figure 12 shows the virtual model after digitisation on the screen. With the model being mounted in the articulator, the pre-fabricated veneers were positioned in the predetermined way and in correct occlusion using wax and then scanned. Figure 13 shows the positioned veneers on the 3D model. Having scanned them once, their geometries can be deposited in the software library. Afterwards, the PEEK framework was designed using the exocad DentalCAD software. Within this context, the software generated a full-contour design proposal which can be modified manually and was subsequently anatomically reduced (Figure 14). Figure 15 shows the planned framework (blue) and the veneers which will be bonded on the framework in a special procedure (grey). It is possible to modify the shape and size of the framework manually, however, the user is warned if he falls below the recommended minimum wall thickness. In all, the designing with a computer enables the creation of precise full-contour designs with regard to the fit of the veneers, the convex shaping of the basal areas with ideal pressure on the gingiva and a direct design of the screw canals. After completion of the design step, the data was sent to the CAM software for nesting in the virtual blank, positioning of the connectors (Figure 16) and milling path calculation (Figure 17). Finally, the framework was milled using the machine DWX-50 (Roland DG, D-Willich) in the production center PEEK-O-BELLO (E-Madrid). Figure 20: Occlusal view of the bridge after placement and before closure of the screw holes RESTORATION PLACEMENT The PEEK framework (Juvora Dental Disc) was removed from the blank (Figure 18). On the master model, a passive and precise fit was confirmed before the veneers were bonded with the PEEK framework using a special technique involving composite material. After finishing and addition of artificial gingiva (Figure 19), the restoration was tried in. Since a precise fit was obtained here as well and modifications were not required, the restoration was immediately screwed onto the four implants (Figures 20 and 21). The patient had a comfortable feeling during chewing and was highly satisfied with the appearance of the restoration. Figure 21: Final restoration CONCLUSIONS This case description shows how Juvora Dental Discs are used within the digital workflow in order to produce precisely fitting implantsupported restorations. Experience gained with PEEK during the past six years suggests it is very well-suited as a framework material for the fabrication of complex semi-removable dentures. Due to the availability of Juvora Dental Discs for CAD/CAM processing, the benefits resulting from the positive material properties can be combined with those of the digital workflow, such as efficiency and precision. Thanks to the elasticity of the material that is similar to that of cancellous bone, chewing forces acting on the restoration are compensated. Due to its elasticity, PEEK thus serves as a shock absorber and imitates the periodontal ligament that is missing around implants. The clinical experience with this material has shown that the peri-implant bone remains stable over time. And if a passive fit is not entirely achievable, the inaccuracies are balanced when the PEEK framework is screwed on the implants. CPD AIMS AND OBJECTIVES To demonstrate the process for manufacturing an implant supported full arch prosthesis using PEEK materials and bonded veneers. EXPECTED OUTCOMES Correctly answering the cpd questions on page 80 shows the reader understand the process and advantages of combining PEEK materials with digital planning. VERIFIABLE CPD HOURS: 1 COMMENTS TO PRIVATE 72

Download Our Free Guide at www.juvoradental.

to metal for long-term 2 fixed and removable prosthetic frameworks More shock absorption 1 than Titanium, addressing problems with parafunction 1 Based on the tendency of a material to deform when

6 Download Our Free Guide at DentalGuide DENTAL PROSTHETICS ALTERNATIVE TO METAL WHY DENTISTS CHOOSE JUVORA 26X MORE SHOCK ABSORPTION 1 CAD/CAM dental disc made from PEEK-OPTIMA TM, a high performance polymer An alternative to metal for long-term 2 fixed and removable prosthetic frameworks More shock absorption 1 than Titanium, addressing problems with parafunction 1 Based on the tendency of a material to deform when opposing forces are applied as expressed by the avg. elastic (Young s) modulus values of the two materials (Titanium 110 GPa or PEEK 4GPa). 2 Kurtz, S (2012). PEEK Biomaterials Handbook. Edition 1, Oxford, Elsevier Inc. Juvora Ltd Hillhouse International, Thornton Cleveleys, Lancashire FY5 4QD United Kingdom +44 (0) info@juvoradental.com

From planning to surgery: a totally digital working flow for Leone implants placement

Dr. Giancarlo Romagnuolo Roma, Italy From planning to surgery: a totally digital working flow for Leone implants placement Keywords guided surgery, 3D implant planning, single missing tooth, delayed immediate