Automatic compensation circuit for constant power output Range of wavelength: 440~480 nm

Transcription

1 2018 July C01 LED CURING LIGHT (5 WATTS) fibre optic light guide 135º contra angle 440~480 nm 1000~1200 mw/cm² fibre optic light guide 135º 063 C10 Light Meter Radiant intensity: 1000~1200 mw/cm² Automatic compensation circuit for constant power output Range of wavelength: 440~480 nm Five modes of working time: 5, 10, 15, 20, 25 seconds A full charge of battery can be used more than 100 times when set at Three working modes: Full, Ramping, Pulse 10 second working time mode Direct charging option from transformer for easy transportation and mobility C01 LED Curing Light 135 Contra Angle... $ Autoclavable light guide 8 mm C01-1 Light Guide (autoclavable)... $59.95 Complete with protective light shield and light sleeves (100 pcs) 123SS Curing Light Sleeves, 500 pcs/box... $44.55 Size: length 24 cm x dia 2.7 cm 063 Light Protective Hand Shield... $33.55 Weight: 160 gm Colours: Pink, Orange, Yellow, Light Green, Green, Lime, Light Blue, Lavender, Light Lavender and For every Curing Light purchased get one C10 Light Meter Hand Shield FREE 24 MONTH WARRANTY C02 LED CURING LIGHT (5 WATTS) direct light source head 90º right angle 440~480 nm 1200~1600 mw/cm² C10 Light Meter Direct light source head 90 for easy access to limited space areas Radiant intensity: 1200~1600 mw/cm² Range of wavelength: 440~480 nm A full charge of battery can be used more than 100 times when set at 10 second working time mode Direct charging option from transformer for easy transportation and mobility Complete with protective light shield and light sleeves (100 pcs) Size: length 23.5 cm x dia 2.7 cm Weight: 160 gm Colours: Pink, Orange, Yellow, Light Green, Green, Lime, Light Blue, Blue, and Black Lavender, Light Lavender, direct light source head 90º 063 Automatic compensation circuit for constant power output Five modes of working time: 5, 10, 15, 20, 25 seconds Three working outputs: 100%, 75%, 50% C02 LED Curing Light 90 Right Angle... $ C02-1 Direct Light Source Head 90 (cold disinfectant only)... $59.95 C02-2 Light Head Protective Caps, 5 pcs/pack... $19.80 C02-3 Heat Protective Rings, 5 pcs/pack... $ SS Curing Light Sleeves, 500 pcs/box... $ Light Protective Hand Shield... $33.55 For every Curing Light purchased get one C10 Light Meter Hand Shield FREE 24 MONTH WARRANTY

2 C01 Curing Lights C01 LED CURING LIGHTS with fibre optic light guides C01 SPECIFICATIONS Model C01-C (classic) C01-S (super power) C01-D (dual range) F.O. LIGHT GUIDE 8 mm ( dia. ) 11 mm ( dia. ) LIGHT WAVELENGTH 440~480 nm 440~480 nm 390~430 nm 440~480 nm APPLICATION General Ortho / General General / Ortho TACK N/A 1,500 mw/cm² for 5 seconds ±10% 2,000 mw/cm² for 1 second±10% 2,000 mw/cm² for 4 seconds±10% AUTOCLAVABLE FIBRE OPTIC LIGHT GUIDE CAN BE ROTATED 360º MODE N/A N/A 2,000 mw/cm² for seconds±10% (with 1 second blink in between) 1,500 mw/cm² for seconds±10% (with 1 second blink in between) 1,200 mw/cm² for 5, 10, 15, 20 seconds±10% RAMP 1 st five seconds from 0 1,200 mw/cm² next 5, 10, 15, 20 seconds 1,200 mw/cm²±10% 1 st five seconds from mw/cm² next 5, 10, 15, 20, 25 seconds 900 mw/cm²±10% CURING LIGHT MODE APPLICATIONS TACK Tack cure, a very short initial curing for temporary processing before final cure. For example, veneer bonding or temporary cement for in position and easy removal of excess material. Super fast curing for resin and composite under 2 mm thickness. Also recommended for ceramic brackets, veneer bonding etc Seconds Mesial + 3 Seconds Distal for metal brackets resin bonding. (with 1 second blink in between) ON/OFF switch Seconds Mesial + 6 Seconds Distal for metal brackets with bonding resin requiring more curing time, and buccal tubes bonding. (with 1 second blink in between) For general applications. AUTOMATIC COMPENSATION CIRCUIT FOR CONSTANT POWER OUTPUT display screen time switch RAMP With first 0 5 seconds ramping for general application. With first 0 5 seconds ramping for more gentle processing, designed for the patients sensitive to the heat. Y COVERED MEMBRANE PANEL FOR EASY CLEANING AND INFECTION CONTROL mode indicators mode switch C01 Complete Set with Built-In Light Intensity Indicator C01-C Curing Light ( Classic ) with 8 mm Light Guide... $ C01-S Curing Light ( Super Power ) with 11 mm Light Guide... $ C01-D Curing Light ( Dual Range ) with 11 mm Light Guide... $ C01-C-1 8 mm Fibre Optic Light Guide... $59.95 C01-S/D-1 11 mm Fibre Optic Light Guide... $ C01/2-1 Replacement Battery... $ S Light Sleeves Small ( for C01-C ) 500 pcs/box... $ L Light Sleeves Large ( for C01-S/C01-D ) 500 pcs/box... $ Protective Hand Light Shield $33.55 SIZE: L265 x Dia.27 (mm) WEIGHT:205 gms charging station light intensity indicator 24 MONTH WARRANTY For every C01 Curing Light purchased (any model) get one 063 Hand Shield FREE REPLACEABLE BATTERY OPENING For every two C01 Curing Lights purchased (same model) get one C01 Curing Light (same model) + three 063 Hand Shields FREE 2

3 C01 Curing Lights LIGHT INTENSITY (mw/cm²) EFFECTIVE WAVELENGTH BAND 440 nm nm 1500 mw/cm² 1200 mw/cm² 900 mw/cm² LIGHT INTENSITY (mw/cm²) EFFECTIVE WAVELENGTH BAND 440 nm nm 2000 mw/cm² 1200 mw/cm² 900 mw/cm² LIGHT INTENSITY (mw/cm²) EFFECTIVE EFFECTIVE LOWER UPPER WAVELENGTH WAVELENGTH BAND BAND 390 nm nm 440 nm nm 2000 mw/cm² 1200 mw/cm² 900 mw/cm² (nm) (nm) (nm) C01-C Light Wavelength C01-S Light Wavelength C01-D Light Wavelength MODEL C01-C (classic) Curing Time Depth Measurements 5 seconds 4.2 mm ISO 4049 Depth Measurements (-50%) 2.10 mm C01-C / C01-S / C01-D CURING LIGHT DEPTH OF CURE C01-S (super power) Curing Time 4 seconds Depth Measurements 4.6 mm ISO 4049 Depth Measurements (-50%) 2.30 mm C01-D (dual range) Curing Time 4 seconds Depth Measurements 4.3 mm ISO 4049 Depth Measurements (-50%) 2.15 mm 4.3 mm 2.15 mm 5.1 mm 2.55 mm 4.4 mm 2.20 mm RAMP 4.1 mm 2.05 mm 5.0 mm 2.50 mm 4.2 mm 2.10 mm 15 seconds 4.6 mm 2.30 mm 15 seconds 4.8 mm 2.40 mm 15 seconds 4.6 mm 2.30 mm REMARKS: Above data is based on test results using an A2 shade composite. The light tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two (50% of the total composite depth cured). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is recommended that you should test your resins and composites performance to determine curing times required. Data is only for reference, always follow the instructions from your resin and composite manufacturers There are many variables (distance and angle between the tip and composite, area, shade, thickness and type etc.) affecting composite curing times. It is recommend to place and cure only 2 mm for each composite placement. Using a barrier sleeve for the curing light will reduce 5-10% of curing light intensity. The light tip should be placed approximately 1-2 mm above the resin or composite and pointed perpendicular to tooth surface. High intensity lights will produce more heat, when using the light for more than, do not keep the light tip in one position. Do not expose soft tissue to curing light for more than 2 seconds or burns may occur. 12 colours available: Pink Orange Yellow L.Green Green Lime L. Blue Blue Lavender L.Lavender White Black 3

4 C02 Curing Lights LOW PROFILE HEAD FOR ACCESSING HARD-TO-REACH AREAS 12 mm C02 LED CURING LIGHTS 90 right angle direct light source head C02 SPECIFICATIONS Model C02-C (classic) C02-S (super power) C02-D (dual range) HARDENED GLASS LENS COLLIMATED UNIFORM STRAIGHT LIGHT BEAM LIGHT GUIDE CAN BE ROTATED 360º STAINLESS STEEL HEAD FOR DURABILITY DIRECT LIGHT HEAD 10 mm ( dia. ) LIGHT WAVELENGTH 440~480 nm 440~480 nm 390~430 nm 440~480 nm APPLICATION General Ortho / General General / Ortho MODE TACK RAMP N/A 1,500 mw/cm² for 5 seconds ±10% N/A N/A 2,000 mw/cm² for 1 second±10% 2,500 mw/cm² for 3 seconds±10% 2,000 mw/cm² for seconds±10% (with 1 second blink in between) 1,500 mw/cm² for seconds±10% (with 1 second blink in between) 1,200 mw/cm² for 5, 10, 15, 20 seconds±10% 1 st five seconds from 0 1,200 mw/cm² next 5, 10, 15, 20 seconds 1,200 mw/cm²±10% 1 st five seconds from mw/cm² next 5, 10, 15, 20, 25 seconds 900 mw/cm²±10% CURING LIGHT MODE APPLICATIONS TACK Tack cure, a very short initial curing for temporary processing before final cure. For example, veneer bonding or temporary cement for in position and easy removal of excess material. Super fast curing for resin and composite under 2 mm thickness. Also recommended for ceramic brackets, veneer bonding etc. ON/OFF switch Seconds Mesial + 3 Seconds Distal for metal brackets resin bonding. (with 1 second blink in between) 6 Seconds Mesial + 6 Seconds Distal for metal brackets with bonding resin requiring more curing time, and buccal tubes bonding. (with 1 second blink in between) AUTOMATIC COMPENSATION CIRCUIT FOR CONSTANT POWER OUTPUT display screen time switch RAMP For general applications. With first 0 5 seconds ramping for general application. With first 0 5 seconds ramping for more gentle processing, designed for the patients sensitive to the heat. Y COVERED MEMBRANE PANEL FOR EASY CLEANING AND INFECTION CONTROL mode indicators mode switch C02 Complete Set with Built-In Light Intensity Indicator C02-C ( Classic ) Curing Light with 10 mm Light Head... $ C02-S ( Super Power ) Curing Light with 10 mm Light Head... $ C02-D ( Dual Range ) Curing Light with 10 mm Light Head... $ C02-C-1 ( Classic ) Direct Light Source Head... $99.55 C02-S-1 ( Super Power ) Direct Light Source Head... $ C02-D-1 ( Dual Range ) Direct Light Source Head... $ C01/2-1 Replacement Battery... $ Light Sleeves ( for C02-C/S/D ) 500 pcs/box... $ Protective Hand Light Shield $33.55 SIZE: L255 x Dia.27 (mm) WEIGHT:185 gms charging station light intensity indicator 24 MONTH WARRANTY For every C02 Curing Light purchased (any model) get one 063 Hand Shield FREE REPLACEABLE BATTERY OPENING For every two C02 Curing Lights purchased (same model) get one C02 Curing Light (same model) + three 063 Hand Shields FREE 4

5 C02 Curing Lights 2600 EFFECTIVE WAVELENGTH BAND 440 nm nm 2600 EFFECTIVE WAVELENGTH BAND 440 nm nm 2600 EFFECTIVE LOWER WAVELENGTH BAND 390 nm nm EFFECTIVE UPPER WAVELENGTH BAND 440 nm nm LIGHT INTENSITY (mw/cm²) 1500 mw/cm² 1200 mw/cm² 900 mw/cm² LIGHT INTENSITY (mw/cm²) 2500 mw/cm² 1200 mw/cm² 900 mw/cm² LIGHT INTENSITY (mw/cm²) 2500 mw/cm² 1200 mw/cm² 900 mw/cm² (nm) (nm) (nm) C02-C Light Wavelength C02-S Light Wavelength C02-D Light Wavelength C02-C / C02-S / C02-D CURING LIGHT DEPTH OF CURE MODEL C02-C (classic) Curing Time Depth Measurements ISO 4049 Depth Measurements (-50%) C02-S (super power) Curing Time Depth Measurements ISO 4049 Depth Measurements (-50%) C02-D (dual range) Curing Time Depth Measurements ISO 4049 Depth Measurements (-50%) 5 seconds 4.4 mm 2.20 mm 3 seconds 4.6 mm 2.30 mm 3 seconds 4.5 mm 2.25 mm 5.1 mm 2.55 mm 5.3 mm 2.65 mm 5.2 mm 2.60 mm RAMP 4.8 mm 2.40 mm 5.3 mm 2.65 mm 4.9 mm 2.45 mm 15 seconds 5.0 mm 2.50 mm 15 seconds 5.4 mm 2.70 mm 15 seconds 5.1 mm 2.55 mm REMARKS: Above data is based on test results using an A2 shade composite. The light tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two (50% of the total composite depth cured). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is recommended that you should test your resins and composites performance to determine curing times required. Data is only for reference, always follow the instructions from your resin and composite manufacturers There are many variables (distance and angle between the tip and composite, area, shade, thickness and type etc.) affecting composite curing times. It is recommend to place and cure only 2 mm for each composite placement. Using a barrier sleeve for the curing light will reduce 5-10% of curing light intensity. The light tip should be placed approximately 1-2 mm above the resin or composite and pointed perpendicular to tooth surface. High intensity lights will produce more heat, when using the light for more than, do not keep the light tip in one position. Do not expose soft tissue to curing light for more than 2 seconds or burns may occur. 12 colours available: Pink Orange Yellow L.Green Green Lime L. Blue Blue Lavender L.Lavender White Black 5

6 Sundries LED.G CURING LIGHT (5 WATTS) LED.G Built-in 24V $ $59.95 $19.80 Buy 5 get 1 FREE (same item) HIGH SPEED DENTAL TURBINES Non Fibre Optic Quiet operation noise level, less than 65 db 350,000 r.p.m. Anti-retraction Ergonomic design Autoclavable up to 134ºC T80W Turbine Wrench Type ( 4 holes )... $ T80W-A Turbine Cartridge... $ MONTH WARRANTY Buy 5 get 1 FREE (same item) T80P Turbine Push Button Type ( 4 holes )... $ T80P-A Turbine Cartridge... $82.50 L10-1 Straight Handpiece 1:1 Standard $99.95 LOW SPEED HANDPIECES AND AIR MOTORS PROPHYLAXIS L20-1PY ( SS ) Screw-In / Snap-On 1:1 Standard $ L20-1L Latch 1:1 Standard $99.95 L20-4PY ( SS ) Screw-In / Snap-On 4:1 Reduction $ L20-1P Push Button 1:1 Standard $ L20-4PY ( P ) 60º Turn Reciprocating Push Button Standard Head 4:1 Reduction $ L20-1PM Push Button Mini Head 1:1 Standard $ L20-4PY ( PM ) 60º Turn Reciprocating Push Button Mini Head 4:1 Reduction $ L20-4P Push Button 4:1 Reduction $ L10-4PY Prophy Angle Straight Handpiece 4:1 Reduction $ L20-4PM Push Button Mini Head 4:1 Reduction $ L38 Prophy Angle Air Motor ( Complete with 3 Nose Cones ) 4:1 Reduction 3,000 r.p.m. ( 4 holes ) $ L30 Air Motor 20,000 r.p.m. ( 4 holes ) $ MONTH WARRANTY MARATHON HANDY ECO LABORATORY BRUSHLESS MICROMOTOR Handy ECO Brushless Micromotor complete set $1, Buy 5 get 1 FREE (same item) SDE-H35E MARATHON LABORATORY MICROMOTOR High torque Hand or foot control Variable speed control 2,000-32,000 rpm Right and left turning ability $ $ SDE-H35E MARATHON MICROMOTOR E FITTING High torque E motor Hand or foot control Variable speed control 2,000-32,000 rpm Right and left turning ability E Motor Set without Handpiece... $ Contra Angle Handpiece 1:1... $99.55 Straight Handpiece 1:1... $99.55

7 Low Speed Handpieces and Motors INTERNAL SPRAY FIBRE OPTIC INTERNAL SPRAY 202CAP Push Button CA 1:1 Standard... $ CAP-B Push Button CA F.O. 1:1 Standard... $ CAP-R4 Push Button CA 4:1 Reduction... $ CAP-R4-B Push Button CA F.O. 4:1 Reduction... $ SH Straight 1:1 Standard... $ SH-B Straight F.O. 1:1 Standard... $ BEING AIR MOTOR AND LOW SPEED HANDPIECES E FITTING INTERNAL SPRAY 12 MONTH WARRANTY Buy 5 get 1 FREE (same item) 202AM-M4 Air Motor 4 Holes 24,000 r.p.m.... $ AM-M4-B F.O. Air Motor 4 Holes 24,000 r.p.m.... $ CAP-A3 Push Button Head CA $ POL-S Prophy Head Snap / Screw $ INTERNAL SPRAY 202CAP-B3 CA Sheath 1:1 Standard... $ BEING LOW SPEED AIR MOTOR AND HANDPIECE HEADS AND SHEATHS E FITTING INTERNAL SPRAY 202 AM-M4 Air Motor 4 Holes Internal Spray 24,000 r.p.m. $ POL-S-R2 Prophy Head CA 2:1 Reduction $ CLEARANCE SALE 30% OFF MARKED PRICE 202CAP-R4-B3 CA Sheath 4:1 Reduction... $ EN60 Twist Head CA 60º Right and Left $ MONTH WARRANTY 201CA-A3 Latch Head CA $49.50 EXTERNAL SPRAY 201CAP-A3 Push Button Head CA $ CA-B3 CA Sheath 1:1 Standard... $ UD04H Up/Down Movement Head $68.75 BEING LOW SPEED AIR MOTOR AND HANDPIECE HEADS AND SHEATHS E FITTING EXTERNAL SPRAY 201 AM-M4 Air Motor 4 Holes External Spray 24,000 r.p.m.... $ POL-S Prophy Head Snap / Screw $ EN60 Twist Head CA 60º Right and Left $68.75 [offer subject to stock availability ] 201-M4 Air Motor Kit 4 Holes External Spray 24,000 r.p.m.... $ Air Motor Latch CA + 201SH Straight Handpiece [ 201CA-R4-B3 CA Sheath 4:1 Reduction... $ MONTH WARRANTY ] CLEARANCE SALE 30% OFF MARKED PRICE [offer subject to stock availability ] EXTERNAL SPRAY EH-20L Head Standard Latch $68.75 EH-50PS Head Prophy Screw Sealed $68.75 $99.55 ¼ Turn $ H-DENT LOW SPEED HANDPIECES E FITTING EXTERNAL SPRAY 12 MONTH WARRANTY $ EH-30TL Head Endo / Prophy ¼ Turn $88.55 EH-50PK Head Prophy Snap-on Spealed $68.75 ¼ Turn $ CLEARANCE SALE 30% OFF MARKED PRICE [offer subject to stock availability ] $

8 High Speed Handpieces MODERN TITANIUM TURBINES LED FIBER OPTIC CERAMIC BEARINGS HIGH TORQUE (16K) STANDARD HEAD (18K) Torque Power: 22 Watts Speed: 350,000 r.p.m. Torque Power: 19 Watts Speed: 350,000 r.p.m. Barden ceramic bearings, durable lifetime Quiet operation, noise level less than 60dB Ergonomic design Anti-retraction system 3 port spray Titanium alloy body Durable fibre optic glass illuminator 25,000 LUX Autoclavable to 134ºC 12 MONTH WARRANTY KaVo MULTIflex LUX Type KaVo MULTIflex LUX Type With Spray Adjustment W&H Roto Quick Type Sirona R/F Type NSK Machlite/Phatelus Type High Torque (22 watts) Speed 350,000 r.p.m. AIR-16KK LED Ti Titanium Turbine Kavo Type... $ AIR-16KW LED Ti Titanium Turbine W&H Type... $ AIR-16KS LED Ti Titanium Turbine Sirona Type... $ AIR-16KN LED Ti Titanium Turbine NSK Type... $ Standard Head (19 watts) Speed 350,000 r.p.m. AIR-18KK LED Ti Titanium Turbine Kavo Type... $ AIR-18KW LED Ti Titanium Turbine W&H Type... $ AIR-18KS LED Ti Titanium Turbine Sirona Type... $ AIR-18KN LED Ti Titanium Turbine NSK Type... $ Cartridge 16K High Torque... $ K Standard Head... $ C-K1 LED Coupling each $ C-K2 LED Coupling each $ C-W2 LED Coupling each $ C-S2 LED Coupling each $ C-N1 LED Coupling each $ Buy 5 get 1 FREE (same item) MODERN LED LIGHT BULBS Life 200 times longer than halogen bulb, brighter light, Simple, Sterilizable, Less self-heating, Less wattage, Durable, Superior light quality... Natural Daylight quality will let you NEVER want to go back to Halogen again! KaVo MULTIflex LUX Type... $38.50 NSK LED Type... $49.50 Sirona R/F Type... $59.95 W&H Type... $99.50 Buy 5 get 1 FREE (same item) 1 x LED = Over 25 X Halogens MODERN TITANIUM TURBINES STANDARD CERAMIC BEARINGS HIGH TORQUE (16K) STANDARD HEAD (18K) Torque Power: 22 Watts Speed: 350,000 r.p.m. Torque Power: 19 Watts Speed: 400,000 r.p.m. KaVo MULTIflex Type NSK Machlite/Phatelus Type Barden ceramic bearings, durable lifetime Quiet operation, noise level less than 60dB Ergonomic design Anti-retraction system 3 port spray Titanium alloy body Autoclavable to 134ºC High Torque (22 watts) Speed 350,000 r.p.m. AIR-16KK Ti Titanium Turbine Kavo Type... $ AIR-16KN Ti Titanium Turbine NSK Type... $ Standard Head (19 watts) Speed 400,000 r.p.m. AIR-18KK Ti Titanium Turbine Kavo Type... $ AIR-18KN Ti Titanium Turbine NSK Type... $ Cartridge 16K High Torque... $ K Standard Head... $ Buy 5 get 1 FREE (same item) 2C-KO Non-LED Coupling each $ C-N01 Non-LED Coupling each $ MONTH WARRANTY MODERN TITANIUM TURBINE CERAMIC BEARINGS 45º for impact surgery 12 MONTH WARRANTY 8 AIR-13 KN Titanium Turbine 45º for Impact Surgery... $ AIR-13 KN LED Titanium Turbine 45º for Impact Surgery... $ C-N01 Coupling... $ C-K1 LED Coupling... $ Buy 5 get 1 FREE (same item)

9 Sundries C10 LED & HALOGEN CURING LIGHT METER BORNART E1 ELECTROSURGERY UNIT C10 Light Meter Simple, compact design for easy use Measures intensity up to 2500 mw/cm² Size: 110 mm x 68 mm x 33 mm 24 MONTH WARRANTY PREMIUM 17" LCD MONITOR Cut COAG 1 & COAG 2 mode with 10 level power cutting User friendly control panel Minimal scar tissue formation Work frequency: MHz ± 5% Max. out power: 50 W (@400 ohm load) Size: W23 cm x D22.5 cm x H8.3 cm $ $49.50 $ SPECIAL $687.50/unit (offer subject to stock availability) MONITOR MOUNTS SPECIAL $ E-CHENG YJ SERIES OIL FREE AIR COMPRESSORS Oil free compressor with air dryer for quality air used in dental operatories With silencing box for quiter operation (for 240V units) $1, $3, $4, $7, SPECIAL YJ060D... $ YJ260WD... $3, YJ130D... $2, YJ370WD... $4, DEMO STOCK CLEARANCE - CASH & CARRY ONLY ALL STOCK MUST GO WHILE STOCK LASTS 9

10 Curing Lights and Scalers PIEZO ULTRASONIC SCALERS with endo function UDS-E (EMS 1 TYPE) PORTABLE SCALER UDS-P (EMS 1 TYPE) TABLE TOP SCALER UDS-N3 (EMS 1 TYPE) BUILT-IN SCALER ARE NOW AVAILABLE WITH LED LIGHT UDS-E LED (EMS 1 TYPE) PORTABLE SCALER Complete with 8 Tips (G1, G4, G5, G6, P1, P3, P4D and E1) Medical solution or distilled water from self-contained liquid bottle UDS-E LED Portable Scaler Set... $ Plastic Bottle Large 500 ml... $27.50 Plastic Bottle Small 350 ml... $27.50 UDS-N3 LED (EMS 1 TYPE) BUILT-IN SCALER DTE-V3 LED (SATELEC 2 TYPE) BUILT-IN SCALER UDS-P LED (EMS 1 TYPE) SCALER UDS-N3 LED KIT (EMS 1 TYPE) Complete with 6 Tips (G1x2, G2, G4, P1 and E1) Size:- W18 cm x D14.5 cm x H9 cm UDS-P LED Table Top Scaler Set $ DTE-V3 LED KIT (SATELEC 2 TYPE) UDS-N3 LED Kit (EMS 1 Type) Built-in LED Scaler with 6 Tips (G1T x 2, G2T, G4T, P1T and E1T)... $ DTE-V3 LED Kit (SATELEC 2 Type) Built-in LED Scaler with 6 Tips (GD1T x 2, GD2T, GD4T, PD1T and ED1T)... $ Size:- W8 cm x D6 cm x H4 cm 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France TITANIUM SCALER HANDPIECES for WOODPECKER, EMS 1 Type Scalers TITANIUM SCALER HANDPIECES for DTE, SATELEC 2 Type Scalers HW-3H (Woodpecker, EMS 1 Type) Non-LED Scaler Handpiece... $ HD-7H (DTE, SATELEC 2 Type) Non-LED Scaler Handpiece... $ HW-5L (Woodpecker, EMS 1 Type) LED Scaler Handpiece... $ HD-7L (DTE, SATELEC 2 Type) LED Scaler Handpiece... $ Buy 2 get 1 FREE (same item) Buy 2 get 1 FREE (same item) 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 10

11 Scaler Tips SCALING G1 (WOODPECKER, EMS 1 Type) GD1 (DTE, SATELEC 2, NSK 3 Type) GS1 (SIRONA 4 Type) G2 (WOODPECKER, EMS 1 Type) GD2 (DTE, SATELEC 2, NSK 3 Type) GS2 (SIRONA 4 Type) G3 (WOODPECKER, EMS 1 Type) GD3 (DTE, SATELEC 2, NSK 3 Type) GS3 (SIRONA 4 Type) SCALER TIPS STAINLESS STEEL FOR WOODPECKER, EMS 1, DTE, SATELEC 2, NSK 3 or SIRONA 4 Type Scalers G1 each $26.95 G2 EMS 1 Type B each $26.95 G3 EMS 1 Type P each $29.15 G1 G2 G3 G4 (WOODPECKER, EMS 1 Type) GD4 (DTE, SATELEC 2, NSK 3 Type) GS4 (SIRONA 4 Type) G5 (WOODPECKER, EMS 1 Type) GD5 (DTE, SATELEC 2, NSK 3 Type) GS5 (SIRONA 4 Type) G6 (WOODPECKER, EMS 1 Type) GD6 (DTE, SATELEC 2, NSK 3 Type) GS6 (SIRONA 4 Type) NSK 3 G1 Satelec 2 #1 EMS 1 Type C NSK 3 G2 Satelec 2 #2 G4 EMS 1 Type A each $29.15 G5 each $29.15 G6 each $29.15 G4 G5 G6 PERIO P1 (WOODPECKER, EMS 1 Type) PD1 (DTE, SATELEC 2, NSK 3 Type) PS1 (SIRONA 4 Type) P3 (WOODPECKER, EMS 1 Type) PD3 (DTE, SATELEC 2, NSK 3 Type) PS3 (SIRONA 4 Type) P4 (WOODPECKER, EMS 1 Type) PD4 (DTE, SATELEC 2, NSK 3 Type) PS4 (SIRONA 4 Type) P3D (WOODPECKER, EMS 1 Type) PD3D (DTE, SATELEC 2, NSK 3 Type) PS3D (SIRONA 4 Type) Smoothing restoration overhangs and debride in-depth root (diamond-coated) P1 each $36.85 P3 EMS 1 Type PS each $36.85 P4 NSK 3 G4 Satelec 2 #10P each $36.85 P3D EMS 1 Type DPL3 P1 P3 P4 P3D P2L (WOODPECKER, EMS 1 Type) P2R (WOODPECKER, EMS 1 Type) P2LD (WOODPECKER, EMS 1 Type) PD2LD (DTE, SATELEC 2, NSK 3 Type) Remove calculus from narrow inter-root spaces (diamond-coated) P2RD (WOODPECKER, EMS 1 Type) PD2RD (DTE, SATELEC 2, NSK 3 Type) Remove calculus from narrow inter-root spaces(diamond-coated) P2L P2R P2LD P2RD P2L P2R P2LD P2RD C&B GD7 (DTE, SATELEC 2, NSK 3 Type) G7 GD7 G8 (WOODPECKER, EMS 1 Type) GS8 (SIRONA 4 Type) G8 G8 Crown Removal each $36.85 each $36.85 Crown Removal, with Irrigation CAVITY PREPARATION SB1 (WOODPECKER, EMS 1 Type) SBD1 (DTE, SATELEC 2, NSK 3 Type) For occlusal surface and cervical margins preparation SB2 (WOODPECKER, EMS 1 Type) SBD2 (DTE, SATELEC 2, NSK 3 Type) SB3 (WOODPECKER, EMS 1 Type) SBD3 (DTE, SATELEC 2, NSK 3 Type) SB1 SBL (WOODPECKER, EMS 1 Type) SBDL (DTE, SATELEC 2, NSK 3 Type) Half ball diamond tip. Set 45 to the left, to remove the carious teeth without damaging the adjacent teeth. SB2 SBR (WOODPECKER, EMS 1 Type) SBDR (DTE, SATELEC 2, NSK 3 Type) Half ball diamond tip. Set 45 to the right, to remove Remove the carious teeth without damaging the adjacent teeth the carious teeth without damaging the adjacent teeth. SB3 SB1 SB2 SB3 Buy 2 get 1 FREE (same number) SBL SBR SBL SBR Remove the carious teeth without damaging the adjacent teeth 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan 4 SIRONA is a registered trademark of Siroa Dental System 11

12 Scaler Tips ENDO E1 (WOODPECKER, EMS 1 Type) ED1 (DTE, SATELEC 2, NSK 3 Type) ES1 (SIRONA 4 Type) SCALER TIPS STAINLESS STEEL E1 FOR WOODPECKER, EMS 1, DTE, SATELEC 2, NSK 3 or SIRONA 3 Type Scalers E1 E14 (WOODPECKER, EMS 1 Type) ED14 (DTE, SATELEC 2, NSK 3 Type) ES14 (SIRONA 4 Type) E14 E Endo Holder, for root canal cleaning E2 (WOODPECKER, EMS 1 Type) ED2 (DTE, SATELEC 2, NSK 3 Type) ES2 (SIRONA 4 Type) 95 Endo Holder, for root canal cleaning E3 (WOODPECKER, EMS 1 Type) ED3 (DTE, SATELEC 2, NSK 3 Type) ES3 (SIRONA 4 Type) For the lateral thermal condensation of gutta-percha E3D (WOODPECKER, EMS 1 Type) ED3D (DTE, SATELEC 2, NSK 3 Type) ES3D (SIRONA 4 Type) Used to remove the calcification and filling material of pulp cavity (diamond-coated) P4D (WOODPECKER, EMS 1 Type) PD4D (DTE, SATELEC 2, NSK 3 Type) PS4D (SIRONA 4 Type) each $49.50 E2 each $49.50 EMS 1 Type H NSK 3 E6 Satelec 2 #S07 E3 each $49.50 NSK 3 E7D Satelec 2 #ET18D E3D Satelec 2 #PM4 P4D E2 E3 E3D P4D Remove obstructions and broken instruments in the root canal, with irrigation E15 (WOODPECKER, EMS 1 Type) ES15 (SIRONA 4 Type) Remove root canal fillings and broken instruments in the coronal third, with irrigation E4 (WOODPECKER, EMS 1 Type) ED4 (DTE, SATELEC 2, NSK 3 Type) ES4 (SIRONA 4 Type) Remove obstructions and broken instruments in the root canal E4D (WOODPECKER, EMS 1 Type) ED4D (DTE, SATELEC 2, NSK 3 Type) E15 E4 E4D E15 E4 E4D Remove calcification in the coronal third of the root canal (diamond-coated) E10D (WOODPECKER, EMS 1 Type) ED10D (DTE, SATELEC 2, NSK 3 Type) Used for root canal retrogression, efficient root apical polishing (diamond-coated) E8 (WOODPECKER, EMS 1 Type) ED8 (DTE, SATELEC 2, NSK 3 Type) Burs Holder, used to expand root canal and grind teeth E9 (WOODPECKER, EMS 1 Type) E10D E8 E10D E8 E9 For retreaments and remove hard materials (diamond-coated) E5 (WOODPECKER, EMS 1 Type) ED5 (DTE, SATELEC 2, NSK 3 Type) Remove root canal fillings and broken instruments in the coronal third E5D (WOODPECKER, EMS 1 Type) ED5D (DTE, SATELEC 2, NSK 3 Type) E5 E5D E5 E5D E9 Burs Holder, used to expand root canal and grind teeth Remove dental overhangs in the pulp chamber (diamond-coated) Buy 2 get 1 FREE (same number) 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan 4 SIRONA is a registered trademark of Siroa Dental System SCALING A1 (AMDENT 6 Type) SCALER TIPS STAINLESS STEEL FOR AMDENT 6 Type Scaler A1 A1T (AMDENT 6 Type) Titanium Coated A1T A2 (AMDENT 6 Type) A2 Buy 2 get 1 FREE (same number) 6 AMDENT is a registered trademark of Amdent AB Sweeden 12

13 Scaler Tips SCALING G1T (WOODPECKER, EMS 1 Type) GD1T (DTE, SATELEC 2, NSK 3 Type) G2T (WOODPECKER, EMS 1 Type) GD2T (DTE, SATELEC 2, NSK 3 Type) G3T (WOODPECKER, EMS 1 Type) GD3T (DTE, SATELEC 2, NSK 3 Type) SCALER TIPS STAINLESS STEEL TITANIUM COATED Non-Sticky, Longer Lasting FOR WOODPECKER, EMS 1, DTE, SATELEC 2, NSK 3 Type Scalers G1T each $29.70 G2T EMS 1 Type B each $29.70 G3T EMS 1 Type P each $33.55 G1T G2T G3T G4T (WOODPECKER, EMS 1 Type) GD4T (DTE, SATELEC 2, NSK 3 Type) G5T (WOODPECKER, EMS 1 Type) GD5T (DTE, SATELEC 2, NSK 3 Type) G6T (WOODPECKER, EMS 1 Type) GD6T (DTE, SATELEC 2, NSK 3 Type) G4T EMS 1 Type A each $33.55 G5T NSK 3 G1 Satelec 2 #1 each $33.55 G6T EMS 1 Type C NSK 3 G2 Satelec 2 #2 each $33.55 G4T G5T G6T PERIO P1T (WOODPECKER, EMS 1 Type) PD1T (DTE, SATELEC 2, NSK 3 Type) P1T P1T PD2LT (DTE, SATELEC 2, NSK 3 Type) P2LT P2LT P3T (WOODPECKER, EMS 1 Type) PD3T (DTE, SATELEC 2, NSK 3 Type) P4T (WOODPECKER, EMS 1 Type) PD4T (DTE, SATELEC 2, NSK 3 Type) each $39.60 P3T EMS 1 Type PS each $39.60 P4T NSK 3 G4 Satelec 2 #10P each $39.60 P3T P4T PD2RT (DTE, SATELEC 2, NSK 3 Type) P2RT P2RT C&B G8T (WOODPECKER, EMS 1 Type) G8T G8T each $39.60 ENDO E1T (WOODPECKER, EMS 1 Type) ED1T (DTE, SATELEC 2, NSK 3 Type) 120 Endo Holder, for root canal cleaning E2T (WOODPECKER, EMS 1 Type) ED2T (DTE, SATELEC 2, NSK 3 Type) Crown Removal, with Irrigation E1T E2T E1T E2T E3T (WOODPECKER, EMS 1 Type) For the lateral thermal condensation of gutta-percha ED4T (DTE, SATELEC 2, NSK 3 Type) EMS 1 Type H NSK 3 E6 Satelec 2 #S07 E3T E4T E3T E4T 95 Endo Holder, for root canal cleaning E8T (WOODPECKER, EMS 1 Type) E8T E8T each $77.55 Burs Holder, used to expand root canal and grind teeth Remove obstructions and broken instruments in the root canal E5T (WOODPECKER, EMS 1 Type) ED5T (DTE, SATELEC 2, NSK 3 Type) E5T E5T Buy 2 get 1 FREE (same number) 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan Remove root canal fillings and broken instruments in the coronal third each $

14 Scaler Accessories SCALER TIPS STAINLESS STEEL FOR KAVO 5 Type Scalers GK1 (KAVO 5 Type) EK8 (KAVO 5 Type) Burs Holder, used to expand root canal and grind teeth GK2 (KAVO 5 Type) GC1 (KAVO 5 Type) GK3 (KAVO 5 Type) GC2 (KAVO 5 Type) GK4 (KAVO 5 Type) PC1 (KAVO 5 Type) Subgingival Scaling GK5 (KAVO 5 Type) Buy 2 get 1 FREE (same number) 5 KAVO is a registered trademark of Kavo Dental GmbH Germany GK6 (KAVO 5 Type) GK7 (KAVO 5 Type) SCALER U-FILES Excellent tenacity 6 pieces per tube Length: 32.5 mm TORQUE WRENCHES Autoclavable Holds Scaler tip inside Colour: TW-1L Torque Wrench (WOODPECKER, EMS 1 Type)... $19.80 TD-1L Torque Wrench (DTE, SATELEC 2, NSK 3 Type)... $19.80 TS-1L Torque Wrench (SIRONA 4 Type)... $19.80 Buy 2 get 1 FREE 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan 4 SIRONA is a registered trademark of Siroa Dental System SCALER ACCESSORIES 15# 20# 25# 30# 35# 40# U-Files,6 pcs/tube $16.50 ENDO WRENCH MALE QUICK DISCONNECTOR each $19.80 each $22.55 SCALER HANDPIECE CABLES Scaler Handpiece Cable (WOODPECKER, EMS 1 Type)... $99.55 Scaler Handpiece Cable (DTE, SATELEC 2 Type)... $99.55 AUTOCLAVABLE TIP HOLDER No.1 AUTOCLAVABLE TIP HOLDER No.2 Buy 2 get 1 FREE each $27.50 each $ EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France Buy 2 get 1 FREE (same item)

15 Sundries US3 (BONE SURGERY) Osteotome of precision in the thin regions 0.6 US4 (BONE SURGERY) Bone chip harvesting crown lengthening US5 (BONE SURGERY) Bone remodeling and bone chip harvesting 2.6 UL1 (SINUS LIFTING) 4.5 Peeling of the sinus membrane UL1 UL4 (SINUS LIFTING) Micrometric osteotomy near the soft tissue (diamond-coated) *Diamond Grit: 100 μm. 0.6 UL2 (SINUS LIFTING) Peeling of the sinus membrane UL2 UL5 (SINUS LIFTING) Peeling of the sinus membrane (angle: 95 ) UL5 UP3 (PERIODONTAL SURGERY) Root Scaling 0.6 UP3 UP4 (PERIODONTAL SURGERY) each $ Root surface debridement each $ and root planning (diamond-coated) *Diamond Grit: 40μm UP4 UI1 (IMPLANTATION) UI1 Used for implant with tip ball Φ1.6 mm each $ Woodpex III Apex Locator... $ Woodpex Spare Probe... $38.50 Woodpex Spare Hook... $49.50 Woodpex Spare Cord... $38.50 Woodpex Spare Clip... $49.50 Woodpex III APEX LOCATOR LCD screen, the trajectory of the file is clearly shown with different colours Advanced multiple frequency technology, automatic calibrating ensures accurate measurements Autoclavable file clip, file hook and file probe Different beep sounds remind the position of the file in the root canal Rechargeable lithum battery Measurement results will not be affected by tooth type, pore size of the root, root canal internal environment or the impact of root canal needle thickness Foldable adjustable viewing angle When the file reaches the front region of the apical foramen, the white bars displayed Battery Power consumption Screen Main unit weight Dimensions When the file reaches the position nearby the apical foramen, the green bars displayed 3.7V/750 mah 0.5 W 4.5 LCD 350 gm 84 mm x 88 mm x 112 mm When the file reaches the apical foramen, the red bars displayed. A continuous beep sound will be generated at the same time PREMIUM AP III DENTAL BURNER Designed for safe, one handed use Battery powered ignition lights instantly with just a press of a button Adjustable flame setting and lock-off switch Burns up to 30 minutes on one butane fill-up Size: 14 cm long $368.50/set SPECIAL $ ENDO a CLASS MICRO MOTOR Cordless Auto stop reverse function From 120 to 2,000 r.p.m. with torque 3.0 Ncm (16:1) Quick connect system for handpiece and motor 90 minutes working time for a full charge 4 programs Test for class B autoclaves to evaluate the capacity of penetration of the steam in hollow loads. Composed of a tube and 250 colour testers to confirm sterilization Helix Tester Set... $ Compatible with popular autoclaves Printing Ribbon each $12.65 AUTOCLAVE ACCESSORIES Universal fitting compatible with popular autoclaves Bacterilolgical Filter each $24.75 Protective Light Shield each $19.80 Endo a Class Micro Motor (with handpiece) $ CURING LIGHT ACCESSORIES Curing Light Depth Gauge each $9.90 Buy 5 get 1 FREE (same item) 15

16 Sundries DOCTOR AND ASSISTANT STOOLS DIA 39 cm 45 cm 33 cm 47 c m Ultra stable base Adjustable for right or left handed operator Standard colours available: Medium Blue, Dark Blue, Dusty Jade Green and Black HEIGHT cm HEIGHT cm HEIGHT cm cm 42 $ $ $ DUSTY JADE GREEN MEDIUM BLUE DARK BLUE BLACK A08 DENTAL APEX LOCATOR Bright LCD screen with the trajectory of the file being clearly indicated by different colours Foldable design with adjustable view angle, saves space and protects the screen The unit is designed with a smooth seamless body and membrane buttons to enhance cold sterilization and help avoid cross contamination Advanced multiple frequency technology with automatic calibrating ensures accurate measurement Measurement results are not affected by tooth type, size of root canal or the internal environment of root canal Different beep tones indicate the position of the file in the root canal Rechargeable lithium battery Accessories autoclavable up to 134ºC Screen size: 110 mm x 70 mm Overall size: L122 mm x W118 mm x H25 mm Weight: 300 gms ( including battery ) 24 MONTH WARRANTY A08 Apex Locator... $ A08-1 Battery... $59.95 A08-2 Spare Probe... $38.50 A08-3 Spare Hook... $49.50 A08-4 Spare Cord... $38.50 A08-5 Spare Clip... $ colours available: 16 Pink Orange Yellow L. Green Green Lime L. Blue Blue Lavender L. Lavender White Black