Tunneling Instruments

Transcription

1 Tunneling Instruments Tunneling Instrument, fig. 1, for upper jaw, double-ended, exchangeable, 18 cm Tunneling Instrument, fig. 2, for lower jaw, double-ended, exchangeable, 18 cm Tunneling Instrument combination, straight 1.8mm / angled 1.7mm, double-ended, exchangeable, 18 cm Tunneling Instruments In Microsurgery Tunneling Instruments find their application in the preparation of flaps for subsequent reconstructions of the alveolar ridge or for root coverings with a connective tissue graft. The instruments allow a minimally invasive tunneling preparation to avoid large openings. Due to the fine shaped raspatories, tunneling incisions in the tissue can be conducted. 02/14 D Seitingen/Tuttlingen Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: Internet:

2 Distributed by: Tunneling Instruments The adaptation of the practiseoriented requirements regarding communication, hygienics and flexibility makes the handle the perfect instrument holder not only for dental diagnosis and prophylaxis, but also the trendsetter for surgery, implantology and microsurgery. Communication: 11 different, fresh base colors additional ID-plugs in corresponding colors Hygienics: PEEK High-Tech Plastic Material the shape design allows best cleaning results and ideal grip Flexibility: exchangeable working tips the -Line is expanded to the fields of surgery, implantology and microsurgery Ergonomics: perfect handiness ideal power transmission with formerly unknown sensitivity relaxed working as the handle can be held in different (diameter) positions Article description Tunnelling Instrument 1 for upper jaw, in handle, lightred-magenta, double-ended, exchangeable inserts Tunnelling Instrument 2 for lower jaw, in handle, yellow-green, double-ended, exchangeable inserts Tunnelling Instrument combination, straight 1.8 mm / angled 1.7 mm, in handle, cobalt blue, double-ended, exchangeable inserts Set for tunneling technique, consisting of: 1/3 wash tray, tunneling instruments fig. 1 upper jaw, fig. 2 lower jaw, fig. 3 upper / lower jaw combination Recommended additional instruments TC -K Needleholder by Dr. Kirsch, straight, lock, double spring, SpinLock, 17.5 cm Order quantity TISC Micro-Scissors Onyx-coated, sharp / sharp, curved, -Line, 18 cm Tissue Forceps, 1 x 2 teeth, 17.5 cm Order by fax to +49 (0) 7464 / or online at: D Seitingen/Tuttlingen Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / Client Number Company / Practice Street, Number info@zepf-dental.com Internet: Postal Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Client

3 straight straight curved curved straight straight curved Instruments DBGM, by Dr. Detlef Hildebrand The implantology with immediate insertion after the tooth extraction is more and more a focus of interest in the modern dentistry. It appears to be more than necessary to conserve soft and hard tissue structures already during the extraction phase and to follow the principles minimally invasive. Here is an ideal complement for this: The -Instruments! In contrast to existing instruments this clearly arranged and universal tool set supports you during the gentle and uncomplicated extraction of teeth which cannot be preserved. Modern therapy methods require modern instruments! Key benefits: Universal and complete extraction instruments in one tray. New handle design (pencil design) prevents unintended slipping during usage. Direct and controlled power transmission to prevent tooth and root fractures. K E NEWS Non-traumatic tooth extraction without injuring surrounding structures. Color coding for clear handling. 09/ Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: All medical devices indicated here bear the

4 curved curved curved curved curved curved curved additional instruments DBGM, by Dr. Detlef Hildebrand Approximal Elevator Modifi ed -Design Elevator NEW! Syndesmotomes -Design Working position pencil handle. NEW! Initial loosening of the desmodontal fi bres. Apply the -Desmo-Tool fi rst approximal then buccal and palatinal. Working position pencil handle. Then progressive luxation with the - Luxa-Tool (fi rst narrow then wide). Ideal positions: Approximal (mesial or distal) to the tooth which should be extracted! Complete luxation of an upper right molar with support of a wide -Luxa- Tool. Gentle extraction without root fractures! Inspection of the empty tooth socket and curettage with support of the - Spoon. Important: Complete removal of all infl ammable and convective tissue structures. D Seitingen-Oberflacht, Tel.: Germany +49 (0) Tel.: / 98 (0) / 98 Fax: Fax: (0) (0) / / info@zepf-dental.com Internet: Internet: All medical devices indicated here bear the K E

5 curved curved curved NEW! Periotomes by Dr. Karl-Ludwig Ackermann Tray DBGM, by Dr. Detlef Hildebrand consisting of: Luxa-Tool-1, 2.5 mm straight, for front teeth and upper jaw Luxa-Tool-2, 4.5 mm straight, for front teeth and upper jaw Luxa-Tool-3, 2.5 mm curved, for lower jaw Luxa-Tool-4, 4.5 mm curved, for lower jaw Desmo-Tool, 4 mm, straight, for initial loosening of the desmodontal fi bres Z Z Lucas Scraper, 2.5 mm, double-ended, 17.5 cm, -Line -Periotomes by Dr. Karl-Ludwig Ackermann Separation of the Sharpey s fi bres with the new -Periotomes by Dr. Karl- Ludwig Ackermann. Before using any root elevator it is advisable to separate the Sharpey s fi bres in the sulcus with a periotome in order to do a non-traumatic tooth extraction. To do this you draw the periotome through the sulcus. The correct application prevents damages on the gingiva and the periost. K E NEWS The two new instruments are characterized by the optimal blade angle so that a separation of the ligaments is possible in all areas. Additionally one of the instruments is equipped with a straight sharp spoon. This is for the complete removal of all infl ammable connective tissue fi bre structures after the extraction. The exchangeable inserts are produced in the approved -System, so that it is possible to swap only one of the inserts. D Seitingen-Oberflacht, Germany Tel.: +49 Tel.: (0) (0) / / Fax: Fax: (0) (0) 7464 / / info@zepf-dental.com Internet: Internet: All medical devices indicated here bear the

6 Distributed by: Why this shape of elevator? Advantages of the scale design handles! Article description Tray, consisting of: Washbasket incl. 2 x Instrument Supports and 1 x Retainer, Luxa-Tool-1, Luxa-Tool-2, Luxa-Tool-3, Luxa-Tool-4, Desmo-Tool and Z Order quantity Old type: Handle is too big and not handy. No secure control of power transmission. Danger of alveolar fractures or demolishing bones. NEW! Luxa-Tool-1, straight, 2.5 mm, for front teeth and upper jaw Luxa-Tool-2, straight, 4.5 mm, for front teeth and upper jaw Luxa-Tool-3, curved, 2,5 mm, for lower jaw Luxa-Tool-4, curved, 4,5 mm, for lower jaw Desmo-Tool, straight, 4 mm, for initial loosening of the desmodontal fi bres Z Lucas Scraper, 2.5 mm, double-ended, 17.5 cm, -Line Luxa-Tool-6, straight, 3 mm Luxa-Tool-7, curved, 3 mm New type new design: Stable but gracile. Anti-skidding shaft, no unintended slipping during usage any more. Perfect power transmission guarantees an optimal non-traumatic root luxation and preservation of neighboured structures. Minimizing bone fractures. Ergonomic working through the modifi ed pencil handle. NEW! NEW! Proximator, curved, 2.5 mm, Fig. 77S, distal elevator Proximator, curved, 2.5 mm, Fig. 77RS, mesial elevator Proximator, curved, 4.5 mm, Fig. 77L, distal elevator Proximator, curved, 4.5 mm, Fig. 77RL, mesial elevator Syndesmotome, curved, 4 mm, distal-angled Syndesmotome, curved, 4 mm, mesial-angled Syndesmotome, left-bending, 4 mm, for lingual / buccal luxation Syndesmotome, right-bending, 4 mm, for lingual / buccal luxation Apical Desmotome, mesial bending, 3 mm, for apical access to the deep-lying root stump Apical Proximator, mesial bending, 2.5 mm, for apical access to the deep-lying root stump Approximal Desmotome, #0, straight, 3 mm, exchangeable, M 4 x 0.5, single-ended -Line Handle Approximal Desmotome, #4, straight, 3 mm, exchangeable, M 4 x 0.5, single-ended -Line Handle Approximal Desmotome, #5, straight, 3 mm, exchangeable, M 4 x 0.5, single-ended -Line Handle Periotome P3 / P2 Combination, by Dr. Karl-Ludwig Ackermann, -Line, double-ended, exchangeable Periotome P4 / sharp spoon Ø 3.0 combination, by Dr. Karl-Ludwig Ackermann, -Line, double-ended, exchangeable All medical devices indicated here bear the Order by fax to +49 (0) 7464 / or online at: Customer Number Company / Practice Street, Number Postal Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Client K E

7 K4-ROBA-E K4-ROBA-E

8 With the new RoBa-Edition introduces a new generation of extracting forceps. Deduced from the Instruments the RoBa-Edition has been especially developed in consideration of easy and gentle extraction. The patented RoBa-Edition according to Dentist Beck is the consequential advancement of conventional extracting forceps with the advantages of the tapered deep-grip extracting forceps. The modifi ed beaks according to Dentist Beck fi t exactly on the teeth which ensures a maximum grip in the appliance. These new beaks are available for all fi gures in upper- and lower jaw (incisors, premolars, molars and wisdom teeth). Due to the fact that all teeth show a convex crown contour (upper jaw: labial, buccal, palatal and in lower jaw: labial, buccal, lingual), the beaks have been developed under this anatomical actuality. The handle is a protected design from, which was developed in co-operation with Dr. Maty, Germany. The billow-grind claws radially into the teeth and avoids a riding in-between the tooth crown and the inner contour of the beak. Concavely elaborated inner contours of the forceps beak fi t in the convex tooth contour. With deep grip in the alveole on the neck of the tooth or on the crown, the RoBa Edition ensures a parallel and maximum grip in any situation. Root fracture almost can be excluded. The different deeply elaborated inner contours ensure maximal adaptation on the teeth in different actualities. No tilting of the teeth while rotary and / or lifting movement. Tapered outside contour of the beak affords deep grip even subgingival. Scale 1: Z ZD ZTI Z ZD ZTI Z ZD ZTI Z ZD ZTI Z ZD ZTI Z ZD ZTI Z ZD ZTI All medical devices indicated here bear the K4-ROBA-E

9 Black finish coating Design meets functionality. Users with highest demands will appreciate the elegant, black fi nish providing the instrument with a non-refl ecting, extremely smooth and scratch-resistant surface. The article number is amended by TI ZTI (Scale 1:1) Diamond version All RoBa-Edition extracting forceps in the classic satin-metallic fi nished surface are available with diamond coating for a better grip. The lower part of the Handle is gold-plated. For ordering etc., just add to the item number the letter D ZD (Scale 1:1) Z ZD ZTI Scale 1:1 Rescue-Line Rescue-Line W W Z ZD ZTI Z ZD ZTI Z ZD ZTI Z ZD ZTI Z ZD ZTI ZS ZSTI ZS ZSTI K4-ROBA-E All medical devices indicated here bear the

10 Dedicated to the long-standing employees Mr. Horst Roos and Mr. Reinhold Bacher, who worked for Helmut Zepf for more than 50 years since their time as trainee. The RoBa-Edition completes the innovative advancement of the famous Extracting Forceps. The RoBa Edition is developed under the aspects of a secure and gentle appliance in direct collaboration with practitioners of incomparable experiences. HELMUT ZEPPF MEDIZINTECHNIK GMBH FACTORY FOR DENTAL AND SURGICAL INSTRUMENTS Obere Hauptstr Seitingen-Oberfl acht, Germany Tel.: +49 (0) / Fax: +49 (0) / info@zepf-dental.com K4-ROBA-E K4-ROBA-E

11 Universalgr Mundspiegel Universalgr Retractor + Mouth Mirror 24 mm 27 mm Retractor and Mouth Mirror by Dentist Beck Size 1, Scale 1: Retractor and Mouth Mirror, size 1, 24 mm, Universal Handle, PEEK, single-ended, signal orange Retractor and Mouth Mirror, size 2, 27 mm, Universal Handle, PEEK, single-ended, signal purple Size 2, Scale 1:1 The Retractor and Mouth Mirror is available in two sizes, featuring a heartshaped, ergonomic and highly polished design. It is universally applicable as: Mouth mirror, cheek or tongue retractor, mucoperiosteal flap retractor. Its innovative heart shape allows ergonomic adaption in all quadrants. Due to its reflective surface, the retractor allows an optimal illumination of the surgical site. The large contact surfaces make the retractor very patient-friendly. The instrument is available in the sizes 24 and 27 mm 03/13 Article description Order quantity Size 1, 24 mm, sterilizable Size 2, 27 mm, sterilizable Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: Order by fax to +49 (0) 7464 / or online at: Customer Number Company / Practice Street, Number Postal Code, City Date Source of Supply / Depot Phone / Fax Signature of the Client

12 CompoSMOOTH by Dr. Gabriel Krastl CompoSMOOTH the surface is the key... Re-creating the original tooth as faithfully as possible is a challenging task for the material, the dental technician and the dentist. In case of direct composite restorations, the complete esthetic responsibility lies in the hands of the practitioner. Optimal instruments are the key to success. The new CompoSMOOTH, a special silicone brush, allows an effortless adaptation and modelling of the composite surface before polymerization. Even sticky composites can be adapted in an optimal way. The perfect surface morphology is created almost automatically by slight pressure. The tooth shape is modeled in a way that reduces the subsequent polishing work to a minimum... and the result optimal! CompoSMOOTH Complete set in a box, with brush holder, 3 x 12 silicone inserts and 4 composite instruments / Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: All medical devices indicated here bear the

13 Distributed by: CompoSMOOTH the surface is the key... Dr. Gabriel Krastl Senior Physician, Clinic for Periodontology, Endodontology and Cariology, Basel Studies of Dental Medicine in Tü bingen (Germany) Academic Assistant, since 2002 Senior Physician at the Department of Conservative Dentistry, University Hospital of Tübingen Since 2005 Senior Physician at the Clinic for Periodontology, Endodontology and Cariology, Basel (Switzerland); Head of the Cariology Group Since 2006 Establishment and Management of the Center of Dental Traumatology, Basel, together with Prof. Dr. A. Filippi Article description CompoSMOOTH by Dr. G. Krastl, Complete set in the box, consisting of washtray with brush holder, 4 composite instruments and 3 x 12 silicone inserts in a box TI Design, Onyx-Coating Composite Spatula / Burnisher Combination TI Composite Spatula TI Composite Burnisher Design, Onyx-Coating Design, Onyx-Coating TI Design, Onyx-Coating Composite Burnisher / Spatula Order quantity Brush Holder -Line Soft Application Inserts for the layering technique, for handle , packing unit 12 pieces Push Out Function All medical devices indicated here bear the Order by fax to +49 (0) 7464 / or online at: Customer Number Company / Practice Street, Number Postal Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Customer

14 Power Periotome FLE -EX Power Periotome Scale 2:1 While using new materials, we were successful in the development of a symbiosis of PowerPeriotome, Elevator and Xtool. The flexible working tip will enable you to build up a phenomenal pressure for the luxation in a radial direction and a perfect match to the contour of the tooth at the same time without bending. The name stands for the excellent product features united in this instrument. Periotome. Power 03/13 Article description Order quantity PowerPeriotome Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: Order by fax to +49 (0) 7464 / or online at: Customer Number Company / Practice Street, Number Postal Code, City Date Source of Supply / Depot Phone / Fax Signature of the Client

15 Bone Block Holder with Stand Bone Block Holder with Stand Your third hand! Bone Block Holder Scale 1:1 Fixed in the stand and in the chuck, the bone block can be processed precisely. The quick lock allows to release the bone block holder rapidly and easily from the stand. Subsequently, due to its ergonomic and light construction, the bone block holder is optimally qualified to fix the transplant in the surgical site Stand for Bone Block Holder Scale 1:1 11/ Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet:

16 Distributed by: Bone Block Holder / Stand Bone Block Holder with Stand Article description Order quantity Bone Block Holder with Stand Bone Block Holder Stand for Bone Block Holder Assembly / Disassembly of the Bone Block Holder Scale 1: Order by fax to +49 (0) 7464 / or online at: D Customer Seitingen/Tuttlingen Number Company Tel.: +49 (0) / 7464 Practice / Fax: +49 (0) 7464 Street, / Number info@zepf-dental.com Postal Internet: Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Client

17 Cranio Maxillofacial Fracture System The aim of an osteosynthesis is the rapid and complete regeneration of the damaged bone function. For this reason, developed the cranio maxillofacial fracture system CMF-Box for Screw Systems Ø 1.2 mm, Ø 1.5 mm, Ø 2.0 mm The aim of this new development is to offer the practician a modular kit which can be adjusted flexibly to the needs any time. An overloading of the set can be avoided due to the individual configuring. However, there is no restriction to equip the system for all indications. The user decides himself what is wanted in the system without systematic restrictions. Advantages of the CMF-System K E Easy atraumatic insertion Biocompatible titanium alloy Easy removal Minimal stress for the patient Good cost-benefit ratio D Seitingen/Tuttlingen Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / / Seitingen-Oberfl acht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: info@zepf-dental.com Internet: All medical devices illustrated here bear the Medical devices marked * = 1253.

18 Cranio Maxillofacial Fracture System The Universal Toolbox The universal tool box is used for storing the tools for the sets CMS / MICRO / MINI. The tool box offers enough space for the following items: Screwdriver handle, big and small, each with dental connector, in the new optimized - Design. They have a socket for exchangeable blades of all different diameters. The use of the handles is easy and intuitive while changing the blades. The small screwdriver is preferably used for the 1.2 mm screws (CMS system), because less effort is needed to fi x the screws. The big screwdriver is preferably used for the 1.5 mm and 2.0 mm systems. This one allows a safe and dosed fi xing of bone transplants and bone plates. The blade holder allows an extra secure fi xing of the screw heads on the blade insert. The pilot drills and the slide hole drill both have a graduation to allow a safe depth orientation. The inserting assistant is used for areas with tight space conditions. The pin applicator which fi ts in the screwdriver handles completes the set for fastening foils and membranes CMF-Box for Screw Systems Ø 1.2 mm, Ø 1.5 mm, Ø 2.0 mm Article Indication // Delivery quantity for the Universal Toolbox instruments: 1 piece Universal Toolbox for screw systems diam. 1.2 mm, diam. 1.5 mm and diam. 2.0 mm incl. lid The content of the toolbox can be chosen from the list below to arrange the necessary screw system: Ø 1.2 mm CMS Ø 1.5 mm MICRO Ø 2.0 mm MINI Screwdriver, big Should not be used for Ø 1.2 mm screws, bercause of possible torque development Screwdriver, small Blade, Ø 1.2, 15 mm Blade, Ø 1.2, 60 mm Inserting assistant, Ø 1.2 mm Blade holder with blade, Ø 1.2 mm Drill, Ø 0.9 x Drill, Ø 1.25 x Drill, Ø 1.45 x Pin applicator 60 mm HF HM-drill, round C Diamond, round Ø 2.9 mm Screwdriver, big Screwdriver, small Blade, Ø 1.5, 15 mm Blade, Ø1.5, 60 mm Inserting assistant, Ø 1.5 mm Blade holder with blade, Ø 1.5 mm Drill, Ø 1.2 x Drill, Ø 1.65 x Drill, Ø 1.95 x Pin applicator 60 mm HF HM-drill, round C Diamond, round Ø 2.9 mm Screwdriver, big Screwdriver, small Blade, Ø 2.0, 15 mm Blade, Ø 2.0, 60 mm Inserting assistant, Ø 2.0 mm Blade holder with blade, Ø 2.0 mm Drill, Ø 1.45 x Drill, Ø 2.05 x Drill, Ø 2.35 x Pin applicator 60 mm HF HM-drill, round C Diamond, round Ø 2.9 mm Tel.: +49 (0) / All medical devices illustrated here bear the Medical devices marked * = K E

19 Screw Rack 5 rows Ø 1.5 mm and 5 rows Ø 2,0 mm Cranio Maxillofacial Fracture System The Screw Racks The Screw Racks are available in the following confi gurations: Ø 1.2 mm CMS Ø 1.5 mm MICRO Ø 2.0 mm MINI Screw Rack Ø 1.2 mm je 10 rows ea. to accommodate 5 screws Screw Rack Ø 1.2 mm 5 Rows and Ø 1.5 mm 5 Rows Screw Rack Ø 1.5 mm je 10 rows ea. to accommodate 5 screws Screw Rack Ø 1.5 mm 5 Rows and Ø 2.0 mm 5 Rows Titanium Pin, 3 mm (Quantity delivered: 5 pieces) Titanium Pin, 5 mm (Quantity delivered: 5 pieces) Titanium Micro Screws Quantity delivered: 5 pieces Titanium Micro Screws Quantity delivered: 5 pieces Screw Rack Ø 2.0 mm je 10 rows ea. to accommodate 5 screws Titanium Micro Screws Quantity delivered: 5 pieces Ø 1.2 x 3 mm Ø 1.5 x 3.5 mm Ø 2.0 x 4 mm Ø 1.2 x 4 mm Ø 1.5 x 4 mm Ø 2.0 x 5,5 mm Ø 1.2 x 5 mm Ø 1.5 x 5 mm Ø 2.0 x 7 mm Ø 1.2 x 6 mm Ø 1.5 x 6 mm Ø 2.0 x 9 mm Ø 1.2 x 7 mm Ø 1.5 x 7 mm Ø 2.0 x 11 mm Ø 1.2 x 8 mm Ø 1.5 x 8 mm Ø 2.0 x 13 mm Ø 1.2 x 10 mm Ø 1.5 x 9 mm Ø 2.0 x 15 mm Ø 1.2 x 12 mm Ø 1.5 x 10 mm Ø 2.0 x 17 mm Emergency Micro Screws Quantity delivered: 3 pieces Ø 1.5 x 11 mm Ø 2.0 x 19 mm Ø 1.5 x 12 mm Ø 1.5 x 13 mm Emergency Micro Screws Quantity delivered: 3 pieces Emergency Micro Screws Quantity delivered: 3 pieces Ø 1.4 x 3 mm Ø 1.9 x 4 mm Ø 2.3 x 5.5 mm Ø 1.4 x 5 mm Ø 1.9 x 6 mm Ø 2.3 x 7 mm Ø 1.4 x 7 mm Ø 1.9 x 9 mm Ø 2.3 x 11 mm Ø 1.4 x 10 mm Ø 1.9 x 13 mm Ø 2.3 x 19 mm Screw Rack Ø 1.0 / 1.2 mm, each 10 rows to accommodate 5 screws Screw Rack Ø 1.5 mm, each 10 rows to accommodate 5 screws Screw Rack Ø 2.0 mm, each 10 rows to accommodate 5 screws Screw Rack Ø 1.2 mm 5 rows and Ø 1.5 mm 5 rows Screw Rack Ø 1.5 mm 5 rows and Ø 2.0 mm 5 rows The packing unit for the screws is 5 pieces (emergency screws 3 pieces). The assembly is chosen by the practitioner. An easy identifi cation of the screws is guaranteed by using the length markers in the tray. Optionally, the tray can store pins with 3 mm and 5 mm length, so that an extra tray is not needed. The Ø 1.5 mm is preferably used for fi xing bone blocks (GBR). The Ø 1.2 mm is preferably used for fi xing membranes and meshes. The Ø 2.0 mm is preferably used for fi xing plates in the plastic reconstruction. Ø 1.0 mm STEEL Screws / also for Screw Rack Drill for 1 mm Screws S Ø 1.0 x 4 mm S Ø 1.0 x 8 mm S Ø 1.0 x 6 mm S Ø 1.0 x 10 mm Drill, Ø 0.75 x 40 K E All medical devices illustrated here bear the Medical devices marked * =

20 Distributed by: Cranio Maxillofacial Fracture System Features of the CMF-System Coated universal toolbox, fi xable, for individual equipping The racks for carrying the screws can also be marked with exchangeable screw indicators for clear identifi cation of the screws Pin carrier in the screw box to extend the system practically with a pin set for fi xing membranes Space for carrying meshes and / or membranes The tight secure fi t of the screws on the screwdriver with self-retaining function enables a secure take up and positioning. The self cutting Phillips screws offer a superior stability and optimal inserting in osseous structures & Screwdriver, small with Blade Holder Ø 1.5 mm Seitingen-Oberfl acht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: All medical devices illustrated here bear the Medical devices marked * = K E

21 TITANIUM MICRO-PLATES FOR CMF Article indication Ø 1.2 CMS Order quantity Titanium Micro-Plate, 6 holes, 0.55 mm, gold anodized Titanium Micro-Plate, 16 holes, 0.55 mm, gold anodized Titanium Micro-Plate, L-Plate, 2 x 4 holes, left, 0.55 mm, gold anodized Titanium Micro-Plate, L-Plate, 2 x 4 holes, right, 0.55 mm, gold anodized Titanium Micro-Plate, L-Plate, 2 x 6 holes, left, 0.55 mm, gold anodized Titanium Micro-Plate, L-Plate, 2 x 6 holes, right, 0.55 mm, gold anodized Titanium Micro-Plate, L-Plate, 3 x 6 holes, left, 0.55 mm, gold anodized Titanium Micro-Plate, L-Plate, 3 x 6 holes, right, 0.55 mm, gold anodized Titanium Micro-Plate, H-Plate, 0.55 mm, gold anodized Titanium Micro-Plate, T-Plate, 0.55 mm, gold anodized Titanium Micro-Plate, Y-Plate, short, 0.55 mm, gold anodized Titanium Micro-Plate, Y-Plate, long, 0.55 mm, gold anodized Titanium Micro-Plate, Double-Y-Plate, short, 0.55 mm, gold anodized Titanium Micro-Plate, Double-Y-Plate, long, 0.55 mm, gold anodized Titanium Micro-Plate, Orbita Plate, 8 holes, 0.55 mm, gold anodized Article indication Ø 2.0 MINI Order quantity Titanium Mini-Plate, 4 holes, 1.0 mm, grey Titanium Mini-Plate, 5 holes, 1.0 mm, grey Titanium Mini-Plate, 6 holes, 1.0 mm, grey Titanium Mini-Plate, 8 holes, 1.0 mm, grey Titanium Mini-Plate, 10 holes, 1.0 mm, grey Titanium Mini-Plate, L-Plate, left, 4 holes, 1.0 mm, grey Titanium Mini-Plate, L-Plate, right, 4 holes, 1.0 mm, grey NEWS Titanium Mini-Plate, L-Plate with bar, left, 4 holes, 1.0 mm, grey Titanium Mini-Plate, L-Plate with bar, right, 4 holes, 1.0 mm, grey Seitingen-Oberfl acht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Titanium Mini-Plate, Y-Plate, 5 holes, 1.0 mm, grey Titanium Mini-Plate, Double-Y-Plate, 1.0 mm, grey Titanium Mini-Plate, T-Plate, 1.0 mm, grey Titanium Mini-Plate, Orbita Plate, 7 holes, 1.0 mm, grey Titanium Mini-Plate, 12 holes, 1.0 mm, grey Titanium Mini-Plate, 14 holes, 1.0 mm, grey Titanium Mini-Plate, 16 holes, 1.0 mm, grey All medical devices indicated here bear the Medical devices marked * = 1253.

22 TITANIUM MICRO-PLATES FOR CMF Article indication Ø 1.5 MICRO Order quantity Titanium Micro-Plate, 4 holes, 0.6 mm, Titanium Micro-Plate, 6 holes, 0.6 mm, Titanium Micro-Plate, 8 holes, 0.6 mm, Titanium Micro-Plate, L-Plate, 100 right, 3 x 3 holes, 0.6 mm, Titanium Micro-Plate, 12 holes, 0.6 mm, Titanium Micro-Plate, 4 holes with bar 4.5 mm, 0.6 mm, blue Titanium Micro-Plate, 16 holes, 0,6 mm, Titanium Micro-Plate, 4 holes with bar 6.0 mm, 0.6 mm, blue Titanium Micro-Plate, 4 holes with bar 7.5 mm, 0.6 mm, blue Titanium Micro-Plate, 4 holes with bar 9.0 mm, 0.6 mm, blue Titanium Micro-Plate, 4 holes with bar 12.0 mm, 0.6 mm, blue Titanium Micro-Plate, 6 holes with bar 7.5 mm, 0.6 mm, blue Titanium Micro-Plate, 6 holes with bar 12.0 mm, 0.6 mm, blue Titanium Micro-Plate, L-Plate with bar 7.5 mm, right, 0.6 mm, Titanium Micro-Plate, L-Plate with bar 9.0 mm, left, 0.6 mm, Titanium Micro-Plate, L-Plate with bar 9.0 mm, right, 0.6 mm, Titanium Micro-Plate, L-Plate with bar 12.0 mm, left, 0.6 mm, Titanium Micro-Plate, L-Plate with bar 12.0 mm, right, 0.6 mm, Titanium Micro-Plate, L-Plate with bar 15.0 mm, right, 0.6 mm, Titanium Micro-Plate, 8 holes, short, 0.6 mm, Titanium Micro-Plate, 16 holes, short, 0.6 mm, Titanium Micro-Plate, T-Plate, 0.6 mm, Titanium Micro-Plate, T-Plate with bar 9.0 mm, 0.6 mm, Titanium Micro-Plate, T-Plate with bar 12,0 mm, 0,6 mm, Titanium Micro-Plate, L-Plate, 100, left, 0,6 mm, Titanium Micro-Plate, L-Plate, 100, right, 0.6 mm, Titanium Micro-Plate, Z-Plate, left, 0.6 mm, Titanium Micro-Plate, Z-Plate, right, 0.6 mm, Titanium Micro-Plate, Y-Plate, 0,6 mm, Titanium Micro-Plate, Y-Plate with bar 12.0 mm, 0.6 mm, Titanium Micro-Plate, Y-Plate with bar 15.0 mm, 0.6 mm, Titanium Micro-Plate, Double-Y-Plate, short, 0.6 mm, Titanium Micro-Plate, Double-Y-Plate, long, 0.6 mm, Titanium Micro-Plate, Orbita Plate, 4 holes, 0.6 mm, Titanium Micro-Plate, Orbita Plate, 0.6 mm, Titanium Micro-Plate, Orbita Plate with bar 12.0 mm, 0.6 mm, Titanium Micro-Plate, Orbita Plate with bar 7.5 mm, 0.6 mm, Titanium Micro-Plate, Orbita Plate, 6 holes, 0.6 mm, Titanium Micro-Plate, Orbita Plate, 8 holes, 0.6 mm, Titanium Micro-Plate, Orbita Plate, 10 holes, 0.6 mm, All medical devices indicated here bear the Medical devices marked * = 1253.

23 3D One Step Augmentation & Implantation 3D One Step Augmentation & Implantation acc to. Dr. Bernd Giesenhagen In co-operation with Dr. Bernd Giesenhagen, the company has developed a new set for the One Step Vertical Augmentation with ring-shaped bone transplants. The aim of this development is an accelerated implant treatment. Thereby, the security of the implantological success as well as the convincing result for the patient and the user have priority. In many cases, this new augmentation method can be used to build up the bone base for the insertion of one or more implants. Particularly suitable for the vertical augmentation of the highly atrophied and distally mandibular (pic. 2). With this newly introduced technique, perfectly fitting ring-shaped bone transplants are removed from the chin-, retro-molar region or from the palatal area (pic. 1) by means of trephines and fixed immediately in the receiving area with a screw implant Economy Set 3D One Step Augmentation & Implantation Set acc. to Dr. Bernd Giesenhagen Dr. Bernd Giesenhagen, the inventor of this procedure, and have selected a special range of instrumentation for precise and time-saving steps of treatment in order to ensure an optimal function /12 D Seitingen-Oberflacht, Seitingen/Tuttlingen Germany Tel.: +49 Tel.: (0) (0) / / Fax: -0 Fax: (0) 7464 (0) 7464 / 98 / info@zepf-dental.com Internet:

24 Distributed by: 3D One Step Augmentation & Implantation 3D One Step Augmentation & Implantation acc. to Dr. Bernd Giesenhagen The local cortical bone structure with spongious parts of vital cells guarantees a safe fixation with short healing time. The filling of possibly existing cavities is usually made by spongious chips taken from the donor area or by bone substitutes. For an additional coverage of the augmented area with a barrier membrane we recommend our Augmentation-Kit For detailed information on technical application and offers of training courses, please refer to: Article description D One Step Augmentation & Implantation Set acc. Dr. Bernd Giesenhagen, Economy Set Washtray 1/2 with Lid and Instrument Rack Adenoid Curette, Ø 3 mm, 30 angeled Mixing Cup, stainless, with POM Lid, Ø 4 cm S Trephine, short, inner Ø 5 mm S Trephine, short, inner Ø 6 mm S Trephine, short, inner Ø 7 mm S Trephine, short, inner Ø 8 mm Trephine with fixation support inside F Ø 5 mm F Ø 6 mm F Ø 7 mm F Ø 8 mm Order quantity Optional accessory (not included in Economy Set) Ring Applicator for rings with Ø 5 and Ø 7 mm, extendable to Ø 9 mm by means of a metal ring see article Metal Ring for Ring Applicator for holding bigger bone rings with Ø 9,0 mm Adenoid Curette, Ø 3 mm, single-ended, straight Ringbreaker, small/large, double-ended Plain Milling Cutter Ø 6 mm, dental lock S Trephine, short, inner Ø 9 mm Trephine with fixation support inside F Ø 9 mm Order by fax to +49 (0) 7464 / or online at: D Customer Seitingen/Tuttlingen Number Company Tel.: +49 (0) / 7464 Practice / Fax: +49 (0) 7464 Street, / Number info@zepf-dental.com Postal Internet: Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Client

25 Drop-Control Blade Holder The Drop-Control Blade Holder combines the design of the regular blade holder with a new and revolutionary function. Drop-Control Blade Holder Scale 1:1 With reference to the mechanism of a ball pen, the blade will be dropped off by pushing the button at the end. The object of this development was a simplified application with the same diameter of the blade holder. Therefore there is no need to adapt to a new application / ergonomics for our regular blade holder! The Drop- Control Blade Holder perfectly fits into our Design product range for surgery, implantology and microsurgery thanks to its diameter, design and ergonomics. By pressing the button at the end of the blade holder the mechanism which lifts the blade is triggered off. The blade is pushed forward so that it falls safely and controlled in a tray or cup. Afterwards the one-hand ejection function moves back in its initial position. After cleaning and sterilization you can insert a new blade as usual. The advantage lies in the fact that the used blade can be removed in a safe and controllable way in order to prevent a contaminated injury or infection. 07/13 Article description Order quantity Drop-Control Blade Holder Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: Order by fax to +49 (0) 7464 / or online at: Customer Number Company / Practice Street, Number Postal Code, City Date Source of Supply / Depot Phone / Fax Signature of the Client

26 Contrast PA Probe Inserts Inserts made of plastic material, exchangeable, M4 x 0.5 mm, packing unit 12 pieces Fig. 1 Graduation 3/6/8/11 mm, Scale 1: Fig. CPG 12 Graduation 3/6/9/12 mm, Scale 1: Fig. CPNG 22 Graduation 2/4/6/8/10/12 mm, Scale 1: Fig. PCPG 11,5 Graduation 3.5/5.5/8.5/11.5 mm, Scale 1: Fig. CNC Graduation from 1-15 in 1 mm steps, North Carolina, Scale 1:1 Contrast PA Probe Inserts The new Contrast PA Probes are made of plastic material and dispose of a fl exible working tip which adapts optimally to the anatomy of the pocket depth when measuring. Colorstable, black markings on the white basic material guarantee a very good contrast for reading. The sterilizable, exchangeable tips are available in different common graduations. They are suited to determine the parodontal status and especially to be used on implants. Scratching of implant surfaces is avoided with these probes. The tips are reusable until: they bend the color fades the graduation is not readable any more Fig. CPNG 22 Graduation 2/4/6/8/10/12 mm Universal Handle signal purple, for all exchangeable tips M 4, single-ended variant, incl. 1 end cap Scale 1: / Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: All medical devices indicated here bear the

27 Distributed by: Contrast PA Probe Inserts Article Description Contrast PA Probe Inserts, Fig. 1, graduation 3/6/8/11 mm, plastic material, exchangeable, M4 x 0.5 mm, packing unit 12 pieces Order quantity Exchange of the inserts, without tools, manually. Please note: Do not use any tools to tighten the inserts! Contrast PA Probe Inserts, Fig. CPG 12, graduation 3/6/9/12 mm, plastic material, exchangeable, M4 x 0.5 mm, packing unit 12 pieces Contrast PA Probe Inserts, Fig. CPNG 22, graduation 2/4/6/8/10/12 mm, plastic material, exchangeable, M4 x 0.5 mm, packing unit 12 pieces Contrast PA Probe Inserts, Fig. PCPG 11.5, graduation 3.5/5.5/8.5/11.5 mm, plastic material, exchangeable, M4 x 0.5 mm, packing unit 12 pieces Contrast PA Probe Inserts, Fig. CNC, graduation from 1-15 in 1 mm steps, North Carolina, plastic material, exchangeable, M4 x 0.5 mm, packing unit 12 pieces Universal Handle for exchangeable tips, M 4 x 0.5 mm, single-ended variant, incl. 1 end cap yellow signal orange red-purple signal purple lightred-magenta turquoise-brightblue cobalt blue yellow green grey black Packing example All medical devices indicated here bear the Order by fax to +49 (0) 7464 / or online at: Client Number Company / Practice Street, Number Postal Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Client

28 Extractor by Dr. med., med. dent. Benno Syfrig Extraction System Basic Kit - Extraction System by Dr. med., med. dent. Benno Syfrig Pursuing logically the quest of gentle extraction, Medizintechnik GmbH has developed a new, patented (Pat. No. CH ) extraction system in close collaboration with Benno Syfrig Dr. med., med. dent from Switzerland. In modern dental treatment, implantology following extraction is increasingly favoured. Consistent with the principle of minimal invasion, conserving soft and hard tissue structures is a must. Starting with extraction. The modified Extractor guarantees a gentle and simple extraction of roots in the whole mouth. It is nearly impossible to harm the soft tissue and the surrounding bone. Due to the longitudinal extraction, is an optimal basis for direct implantation. It is also a valuable help for retarded implantation after the extraction with the system. Studies made after the use of prove that the reossification of the extraction alveole is advancing optimally. This is a great advantage for the retarded implantation. The new is now available in a washtray complying with the RKI guidelines. That way, the requirements of optimal cleanability and sterilization were taken into account. You will find further information, application examples and the user forum at: K E / Seitingen-Oberflacht, Germany Tel.: +49 (0) 7464 / Fax: +49 (0) 7464 / info@zepf-dental.com Internet: All medical devices indicated here bear the

29 Alveolar Ridge Preservation with What does it mean? Alveolar Ridge Preservation means the treatment of the dental alveole after extraction. 3 months after the extraction you fi nd a considerably better ridge relation than with conventional gentle extractions. The fi nds its successful application in both, private practices and universities. The has achieved an excellent status worldwide as basis for a subsequently successful implantation. A Pict. 1A Polygon of forces, conventional: Pressure on the alveolar wall by forceps or root elevator 1B Purely axial traction with B 1 Pict. 2 Longitudinal extraction with Step by step: Pivot tooth extracted due to root fracture 2 3 Pict. 3 Longitudinal extraction with Step by step: Axial removal The new support for the dismounted System in a washtray guarantees an optimal cleanability of in a washing machine or in an ultrasonic bath. All components can be fi xed safely in the support. Upon cleaning, the system can be sterilized in assembled condition. In addition to the components, an optional perio tome, an Xtool and an optional Pole Extractor can be placed in the support. Pict. 4 Longitudinal extraction with Step by step: Soft and hard tissues preserved Pole Extractor, optional, see application on the last page Pict. 5 Longitudinal extraction with Step by step: Soft tissue, 12 weeks after extraction Pict. 6 Longitudinal extraction with Step by step: Alveolar ridge, 12 weeks after extraction Basic Kit consisting of: see in the table Extraction System consisting of: see in the table Tel.: +49 (0) / All medical devices indicated here bear the FURTHER QUESTIONS? K E

30 Illustration Article Description Order Quantity Basic Kit, 1 piece Extraction System by B. Syfrig, consisting of: Extractor, Pullrope 48 mm, Driver Guide, Screw short 1.6 mm mm, Screw long 1.6 mm mm, 1 Drill ea. for 1.6 mm mm Screws, Quadrant Support, Washtray with Lid Washtray 1/2 with 1 piece Lid and Press Button Lock Extraction 1 piece System consisting of: Extractor, Pullrope 48 mm, Driver Guide, Screw short 1.6 mm mm, Screw long 1.6 mm, 1 Drill ea. for 1.6 mm mm Screws, Quadrant Support, Washtray with Lid, Tray / Rack for Tray / Rack 1 piece Washtray 1/1 1 piece with Lid Extractor 1 piece Replacement 1 piece Support Disc, 8 mm (PTFE) Support Disc, 1 piece diagonally left Support Disc, 1 piece diagonally right Pullrope, 48 mm 2 pieces Benno Syfrig Since 1992 Oral-Surgical Referral Practice with Dr. Bernd Bloch Development and scientifi c evaluation of a new, minimally invasive surgical method for implantation in the maxillary sinus area: Publication in 2010, Deutscher Ärzte-Verlag zzi Z Zahnärztl Impl 2010; 26 (1) Development and patenting of an instrument for a tissue-conserving tooth root extraction (Benex Extractor) Adviser activity as specialist dental practitioner since 15 years Since 1998 Management of the ITI (International Team for Implantology) User Meeting of Central Switzerland Regular Live Demo Surgeries of Implantation for Dentists and specialists from dental industry Dental Assistant in a Private Practice Regular substitution of the SUVA District Medical Offi cer, approx. 1 working year in total Studies of Dental Medicine, University of Basel, State examination in Assistant Doctor in different hospitals, with focus on surgery 1981 Doctoral Thesis: The Splenome Studies of Medicine, University of Zürich, State examination in 1979 The new Support Discs Diamond coated 2 pieces (1 ) Drill for Screws Ø 1.6 mm und Diamond coated 2 pieces (1 ) Drill for Screws Ø 1.8 mm Driver Guide, short 1 piece Screw, Ø 1.6 mm, 2 pieces (1 ) 10 mm, S = Short Screw, Ø 2.1 mm, 2 pieces (1 ) 10 mm, SF = Short & Fat Screw, Ø 1.6 mm, 2 pieces (1 ) 16 mm, L = Long The new Support Discs allow an easy and fast compensation of the axial adjustment of to the root to be extracted, if the straight support disc is not suffi cient. K E All medical devices indicated here bear the Screw, Ø 2.1 mm, 2 pieces (1 ) 16 mm, LF = Long & Fat Quadrant Support for 1 piece to bridgeover bigger gaps and for the universal molding

31 FURTHER QUESTIONS? The Pole Extractor The patented supplement to the Extraction System For roots with a strong decline to the occlusion level and / or inappropriate access for the positioning of the Extractor. For poorly anchored root / tooth fragments: in apical root fractures after conventional extraction in deep loss of attachment in small periodontal root surface in defl ected tooth germs Examples of use: palatal roots of the molars in the upper jaw (buccomesial decline) distal roots of the molars in the lower jaw (mesial decline) horizontally defl ected canines in the upper jaw apical root fragments after conventional extraction loosened roots in the case of deep loss of attachment roots with small periodontal surface defl ected root germs (mesiodens et al.) Pole Extractor Pole Extractor Scale 1:1 for For detailed information, examples of use and the User Forum, please refer to: Article Description Pole Extractor Order Quantity Extraction System Basic Kit All medical devices indicated here bear the Order by fax to +49 (0) 7464 / or online at: Client Number Company / Practice Street, Number Postal Code, City / / Date Source of Supply / Depot Phone / Fax Signature of the Client K E