TREADMILL T8000E OWNER'S MANUAL JOHNSON HEALTH TECH. CO., LTD.

Transcription

1 TREADMILL T8000E JOHNSON HEALTH TECH. CO., LTD. No.26, Ching Chuan Rd., Taya Hsiang, Taichung Hsien 428, Taiwan, R.O.C. TEL: FAX: July 30, 07 SAP# A OWNER'S MANUAL

2 TABLE OF CONTENTS INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS SETUP THE TREADMILL Getting Started Making A Choice Of Site Stabilizing The Johnson Treadmill Centering The Belt Electrical Power Requirement Grounding Instructions Antenna Or Cable TV (CATV) Connection RCA Connection Unpacking The Johnson Treadmill ASSEMBLY Fasteners & Assembly Tools Assembly Instructions SERIAL NUMBER LOCATION USING THE WORKOUTS Display Console Display Descriptions Workout Parameter Prompts Workout Overviews Workout Tips Workout Setup Steps Using Fitness Networking MANAGER'S CUSTOM MODE Manager Menu TV Setup MAINTENANCE Recommended Cleaning Tips Centering The Belt Tensioning The Belt Maintenance Lamp PRODUCT SPECIFICATIONS Model T8000E Specifications

3 INSTRUCTION This Owner s Manual describes the functions of the following product: Johnson Fitness Treadmills T8000E See Product "Specifications" (Page 39) in this manual for product specific features, the Johnson Treadmill T8000E is intended for commercial use. It is recommended that all users of Johnson Fitness exercise equipment should be informed of the following information prior to its use. When using the Johnson Treadmill, always follow basic precautions: To ensure your safety and to protect the unit, read all the instructions before assembling and using the treadmill. To ensure the proper use and safety of the treadmill, make sure that all users read this manual. Please make this manual a part of your facility s training program. Remind the users that before undertaking any fitness programme, they should obtain complete physical examinations from their physicians. If, at any time while exercising, the user experiences dizziness, pain, or shortness of breath, nausea or feels faint he or she must stop immediately. SAVE THIS OWNER S MANUAL FOR FUTURE REFERENCE. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE ALL INSTRUCTIONS before assembling or using this Johnson Treadmill. It is strongly recommended to take the following safety instructions. DANGER: To reduce the risk of electrical shock, always unplug the Johnson Treadmill before cleaning or attempting any maintenance activity. WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to a properly grounded electrical outlet. CAUTION: If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing. Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not working properly, or if it has been damaged or immersed in water. Return the treadmill to Johnson Fitness or authorized dealers for examination and repair. Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord as a handle. Never place the power cord under carpeting or place any object on top of the power cord. Only use the power cord provided with your Johnson Treadmill. If the power cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a a similarly qualified person to avoid a hazard. To disconnect, turn the switch to the off position, then remove the plug from the outlet. Use this treadmill for its intended purpose as described in this manual. Do not use attachments that have not been recommended by the manufacturer. Never drop or insert any object into any opening in the product. If an object should drop inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Johnson Fitness or authorized dealers. Do not reach into, or underneath the unit or tip it on its side during operation. Keep hands and feet clear at all times from moving parts to avoid injury. Do not remove the treadmill motor cover or roller covers. Service should be performed only by an authorized service technician. Do not use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Johnson Fitness or authorized dealers. Do not use the Johnson Treadmill outdoors, near swimming pools or in areas of high humidity. Do not operate where aerosol (spray) products are being used or when oxygen is being administered

4 SETUP THE TREADMILL Be sure the emergency stop pull cord is clipped to user and in a proper placed position on the user before beginning any workout. Use the stationary handrails when mounting or dismounting the treadmill. Place the feet firmly on the right and left side platforms before the running belt begins moving (prior to a workout). Step onto the running belt when the speed is at or below.6 km/h ( mph). Never mount or dismount the treadmill while the running belt is moving. Handrails may be held to enhance stability as needed, but are not for continuous use. Do not wear any clothing that might catch on any moving parts of this treadmill. Never walk or jog backwards on the treadmill. Do not use this product in bare feet. Do not wear shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles. Do not turn the belt by hand. Close supervision is necessary when used near children, invalids or disabled people. When the treadmill is in use, young children and pets should be kept at least 3 meters / feet away. When it is necessary to immobilize the treadmill, set the display to read "SELECT PROGRAM". (Pressing the Emergency Stop key twice will immediately take the unit to this screen). Then hold down the "CH " and "VOL " keys at the same time. The treadmill will display "IMMOBILIZED". In this state, the treadmill can not be operated. Both the drive motor & elevation motor are disabled. The treadmill will remain in this state across power cycles, resets, etc. To return to normal operation mode repeat the same key sequence, hold down the "CH " and "VOL " keys. The treadmill will display "SELECT PROGRAM" again. GETTING STARTED Read the Owner s Manual before setting up the Johnson Fitness Treadmill. Place the treadmill in where it will be used before beginning the setup procedure. MAKING A CHOICE OF SITE The site that you select for the treadmill should be well-lit and well ventilated. Locate the T8000E on a structurally solid and flat surface a few meters / feet from the wall or any equipment (Allow a distance of 2 centimeters, or eight inches, between the treadmill and other units on either side. Allow a distance of two meters, or six feet, from the rear of the treadmill to any object or surface.) If the site has a heavy plush carpet, to protect the carpeting and machinery, you should place a rigid plastic base under the treadmill. Please do not place the treadmill in an area of high humidity, such as the vicinity of a steam room, indoor pool, or sauna. Exposure to intensive water vapor or chlorine could adversely affect the electronics, as well as other parts of the machine. To make exercise a desirable daily activity for you, the treadmill should be in an attractive setting. STABILIZING THE JOHNSON TREADMILL After placing the unit in where it will be used, check its stability. If the treadmill is placed on a slightly uneven surface, adjusting the adjustable levelers located underneath the base frame can help, but will not compensate for extremely uneven surfaces. To adjust, loosen the nut, and turn the leveler until the rocking motion ceases, and both levelers rest firmly on the floor. Retighten the nut. NOTE: It is extremely important that the levelers are correctly adjusted for proper operation. An unbalanced unit may cause striding belt misalignment. A bubble level is recommended to ensure proper leveling. 8000E 04 05

5 CENTERING THE BELT After installing and leveling the treadmill, check the belt to ensure that it is tracking properly. The belt might need to be adjusted after the first two hours of use. If the belt needs to be adjusted, please see ADJUSTING THE BELT at the section of MAINTENANCE for details. ELECTRICAL POWER REQUIREMENT The Johnson Fitness Treadmill requires a dedicated line according to the electrical configurations listed in the chart below. It is particularly important that no sensitive electrical equipment, such as a computer or a TV, shares the same circuit. DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service provider if you are in doubt as to whether or not the product is properly grounded. DO NOT modify the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician. Any modification to the electrical plug will result in a voided warranty. ANTENNA OR CABLE TV (CATV) CONNECTION Connect your F type cable or antenna coaxial signal cable to the provided RF antenna adapter. Once you have connected the cable to the adapter, insert the connector. Supply Voltage (VAC) 0 Frequency (Hz) 50 / 60 Hz Rated Current (Amps) 5 NOTE: The TV aspect of the LCD Console can only receive an analog signal. Digital cable must be externally converted to an analog signal. A 75-ohm external antenna terminal for VHF/UHF (>43dBuV (@75ohm) or > 65.8dBm) TV signal input must be present before TV setup can occur / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 5 RCA CONNECTION If the treadmill would display DVD or VCR entertainment, it is able to connect the supplied RCA Audio/Video signal cable as follows: YELLOW: Composite Video Out on your DVD, VCR, etc. to the Composite VIDEO Input connector on the TV. WHITE: Left Audio Output on your DVD, VCR, etc. to the AUDIO-L Input on the TV. RED: Right Audio Output on your DVD, VCR, etc. to the AUDIO-R Input on the TV / 60 Hz CATV CONNECTION GROUNDING INSTRUCTIONS The Johnson Treadmill must be properly grounded. If the product malfunctions or breaks down, proper grounding provides a path of least resistance for the electric current to reduce the risk of electrical shock. This product is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local codes and ordinances. C-SAFE VIDEO AUDIO-L AUDIO-R RCA CONNECTION 06 07

6 UNPACKING THE JOHNSON TREADMILL The Johnson treadmill is carefully inspected before it is packaged. It is shipped in four T8000E pieces: the frame base, the upright console supports, the console, the foam rubber handles and the hardware kit. Carefully unpack the unit and dispose of the box material. CAUTION: This unit weighs 69 kg / 374 lbs. To avoid injury to the user and the unit, be sure to have proper assistance to remove and move the unit. Frame Base Console Console Supports Foam Rubber Handles Hardware Kit NOTE: In case any of these parts are missing from the package, please contact Johnson Fitness or the local authorized dealers at once

7 ASSEMBLY FASTENERS & ASSEMBLY TOOLS ASSEMBLY EXPLODED DIAGRAM PARTS NO. DESCRIPTION QUANTITY SKETCH Z0 PHILLIPS SCREWDRIVER Console Z02 #5 L-TYPE ALLEN KEY Z03 #8 L-TYPE ALLEN KEY Swift Controls Panel Z04 #2 L-TYPE ALLEN KEY Z52 Motor Cover Z50 WASHER 8 Z5 Z50 Z52 Z5 SOCKET HEAD SCREW (M x.5p x 25L) 8 N06 Console Support Z50 Z5 Z53 Z52 SOCKET HEAD SCREW (LOW HEAD) (M8 x.25p x 5L) 4 Foam Rubber Handle Q53 Z53 CROSS-HEAD BUTTON SCREW (M5 x 0.8P x 2L) 2 Frame Base N04 N07 Z54 SOCKET HEAD CAP SCREW (ULTRA LOW HEAD) (M3 x 0.5P x 5L) 4 ASSEMBLY INSTRUCTIONS Please make sure that the power plug is not plugged into the wall outlet while completing the following procedure. To ensure correct assembly of the T8000E, carefully read and follow these steps: ATTENTION: After installation is completed, the treadmill will need to be calibrated by using the AUTO-CHECK function. If this is not done, the treadmill's speed and incline values may be incorrect and damage the treadmill. Do not stand on the belt when performing the AUTO-CHECK function.

8 STEP STEP 2 Unscrew the screw (Q53) on each side, and keep the screws. Remove the motor cover. Connect the console cable from the console set to the motor control board. And insert the Pull out console, antenna coaxial signal, RCA and C-SAFE cables and route them through other connectors to upper control board and TV module. Secure the console set with 2 screws the right console mast. Place the right console mast and then the left console mast in the (Z52) on each side. console support brackets. Secure the right and left support with the 4 screws and 4 washers provided (Z5, Z50). Make sure these screws are tightened. Z5 Z50 Z52 Z52 Z50 Z5 2 3

9 STEP 3 STEP 4 Put the foam rubber handle into the handlebar frame. Use the handlebar cap (N06, N07) to secure the handle foam rubber. Note: The handle bar caps separate into right and left, make sure these caps are in the correct position. ). Connect the speed and incline Swift Controls cable with the control panels. Secure the Swift Controls panels onto the handlebars with the 2 screws (Z54) on each side. Note: The Swift Controls panels separate into right for SPEED control and left for INCLINE control, make sure these panels are in the correct position. 2). Place the motor cover onto the treadmill front end and secure with the screws (Q53) included in the motor cover and the screws (Z53) provided in the hardware kit. Plug the power cable into the outlet. Z54 Z54 N03 N06 Z53 Q53 N04 N07 4 5

10 FINAL ASSEMBLY Enter the MANAGER s CUSTOM SETTINGS to execute P5 AUTO CHECK. The treadmill s speed and incline will be calibrated automatically. This will take around 2 minutes to run. After completing calibration, press EMERGENCY STOP key twice to back to the initial starting screen. SERIAL NUMBER LOCATION SERIAL # PLACEMENT 6 7

11 USING THE WORKOUTS DISPLAY CONSOLE TV REMOTE CONTROL keys: These keys are dedicated TV entertainment controls for the TV and the screen switch. VOL + / - : Volume control for the TV. CH + / - : Channel control for the TV. A D A THE TFT LCD DISPLAY: The TFT LCD Display provides interactive workout screen and easy access to entertainment TV. MODE: This key allows the user to switch the LCD screen showing relevant workout data or size of entertainment screen. 2 SPEED & INCLINE: Use the arrow keys to adjust speed or incline. 3 START / SELECT / QUICK START: This key has several functions during an exercise session. B C B EMERGENCY STOP: Press the button to stop the running belt and end the current workout. To resume, press the button once again. Each function is described as below: START: Use the START key to begin your workout after the workout setup. SELECT: Use the SELECT key to confirm specific prompts during the workout setup. QUICK START: Press QUICK START to begin your workout immediately, without having to select a workout program. 4 RIGHT AND LEFT ARROWS: These right and left arrows present the available selections and affect what appears on the display. C CONTROL KEYPAD: The Control Keypad allows the user to set up programs, control workout and adjust TV parameters PAUSE / RESET / CLEAR: This key has several functions during an exercise session. Each function is described as below: PAUSE / RESET: Press this key once to enter PAUSE mode. And, press it again to reset the treadmill and restart the programming sequence. CLEAR: Use the CLEAR key to clear data not yet entered during the workout setup. 6 PROGRAM QUICK KEYS: To begin an exercise session, press any of these keys to select the program. For detailed program descriptions, refer to WORKOUT OVERIVEWS. WARM UP: Press this key to begin an automatically customized workout warm-up. COOL DOWN: Press this key to begin an automatically customized workout cool-down. D HEADPHONE JACK: The jack is located on the left-hand side of the console faceplate housing. Headphones are necessary to access the sound for the TV

12 DISPLAY DESCRIPTIONS The TFT LCD Display allows the user to move from screen by screen by Control Keypads to access other screens. The TFT LCD Display enables users to access: ) PROGRAM SELECTION choose a workout 2) WORKOUT SETUP enter workout values CORRESPONDING KEYS CONTROL KEYPADS DESCRIPTIONS SELECT START SELECT Press SELECT key to confirm an entry of the number. Press START key to begin the workout. PROGRAM A A3 A2 SELECT PROGRAM PROGRAM SELECT A. PROGRAM ICONS: Display all programs MANUAL, INTERVAL, WEIGHT LOSS, FAT BURN, 5K RUN, TARGET HEART RATE, QUICK START, WARM UP and COOL DOWN. If one of programs is selected, the program icon becomes hollow. And, the selected program icon pops out to show as a large icon in the screen. A2. INFORMATION DISPLAY: To display instructions for a workout setup. A2-. INFORMATION AREA: Shows the user what workout is currently being set up. PAUSE RESET Press CLEAR key to clear data not yet entered during the workout setup. Press RIGHT arrow key to increase value for the workout parameters. Press this key to select SPEED control mode during the setup of heart rate program. A2-2. CORRESPONDING KEYS: These keys are corresponded to the keys on the Control Keypads, listed in the following chart. CLEAR A2-2 A2- A2-2 - LEVEL SELECT LEVEL LEVEL + SELECT A3. VALUE CIRCLE: Shows values for workout parameters set up. The unenclosed circle would increase or decrease a dotted curve depending on the value input. The small red numbers represent minimum and maximum values in each workout parameter. Press LEFT arrow key to decrease value for the workout parameters. Press this key to select INCLINE control mode during the setup of heart rate program. PAUSE START CLEAR RESET SELECT QUICK START PROGRAM QUICK KEYS INCLINE A2-2 A2-2 SPEED TV REMOTE CONTROL KEYS INTERVAL WEIGHT LOSS M MANUAL 5K RUN WARM UP COOL DOWN FAT BURN TARGET HR VOL VOL MODE CH CH 20 2

13 3) WORKOUT PROGRESS monitor progress, edit workout goals, and access TV viewing B B3 B. PROGRAM NAME: Shows the user what workout is currently exercising. WORKOUT PARAMETER PROMPTS PROMPT DEFAULT MINIMUM MAXIMUM UNIT TIME minute LEVEL B2 B3 B4 B2. WORKOUT PROFILE: During a workout, intervals, hills and valleys appear in this window as rows of lights stacked in columns. The number of lit rows within a column corresponds to an incline percentage. B3. WORKOUT READOUT: Shows the workout readout the user is currently exercising. B4. DISPLAY MODE: Shows the LCD screen display mode. The mode has relevant workout data and size of entertainment screen. WEIGHT AGE SPEED INCLINE 68 / / / / / 2 5 kg / lbs years old km/h / mph NOTE: The workout time displays countdown according to default time or the maximum time that the club owner set. When the workout time input as 0, the time will count from 0 to the maximum time depending on the fitness club setup. The workout pattern repeats until the maximum workout time is completed. % B5 B5. TV SCREEN: Shows the current TV program. B3 B6. CH / VOL DISPLAY: Shows the current channel number and TV volume. B6 B4 B

14 WORKOUT OVERVIEWS PROGRAM NAME QUICK START MANUAL INTERVAL WEIGHT LOSS FAT BURN 5K RUN TARGET HR WARM UP DESCRIPTION Quick Start is the fastest way to begin exercising and bypasses the setup prompts. After pressing the QUICK START key, a constant-level workout begins, and the speed and incline do not change automatically. Manual is a constant effort workout in which the user can change incline or speed at any time. Interval is periods of intense aerobic exercise separated by regular periods of lower-intensity exercise. At any point during the workout, the user can change the settings of the current speed. Weight Loss is designed to promote weight loss by raising and lowering the elevation. The treadmill automatically adjusts the incline according to the overall time. Fat Burn is a high-intensity workout for burning the body's fat reserves. The program adjusts the intensity level through changing the elevation, and the user controls the speed during the workout. 5K Run is designed to simulate a 5K run with elevation changes. The program completes when the user has completed 5K, so there is no preset time. The user can make speed changes during this program. Target HR is a higher intensity workout for more fit users, emphasizing cardiovascular benefits. The user must wear a heart rate chest strap, or grasps the HR grip sensors continuously. The program adjusts the intensity level, based on the actual heart rate, to maintain the rate at 80 percent of the theoretical maximum. Warm-up is a low-intensity phase that brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles. DEFAULT TIME 20 min 20 min 20 min 20 min 20 min PROGRAM CONTROL Elevation Elevation Elevation Elevation Elevation Speed or PROMPT INPUT Speed Time Time, Weight Level, Time, Weight Level, Time, Weight Level, Time, Weight Level, Weight Age, Target, Heart Rate, Max Speed or Max Elevation, Time, Weight WORKOUT TIPS Johnson Fitness strongly recommends seeing a physician for a complete medical exam before undertaking an exercise program. If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breathe, he or she must stop immediately. Without anyone standing on the treadmill, plug the power cord into a dedicated electrical outlet. The On/Off switch for the treadmill is located next to the power supply plug in. Turn the switch to the on " I " position to activate the treadmill. To mount or dismount the treadmill, grasp the stationary side-handrails and place the feet firmly on the right and left side platforms before the running belt begins moving. Prior to the workout, please always attach the security clip to your clothing. When you are comfortable situated onto the running belt, the computerized display console on the treadmill instructs you to operate the unit. The better position of feet to walk on the treadmill is where feet planted on the belt to have your arms bent slightly and your hands grasped the heart rate sensors (as below illustration). At the running speed, the feet stand on the point of the belt where the hands at a natural swing are not able to touch the front handrail. Hold onto the handrail with one hand while you increase SPEED with the other hand. Once you are comfortable with the walking or running speed, you can remove your hands from the handrail. Do not attempt to grasp the sensors at speeds above 7.2 km/h (4.5 mph). For these speeds, the use of a heart rate chest strap is recommended. It is highly recommended that you always incorporate the warm-up and cool-down period into your workout. Warm-up brings the heart rate into the lower end of the target zone and increases respiration and blood flow to working muscles. Cool-down takes time for a user s heart rate to return to a resting state after vigorous exercise and reduces the amount of lactic acid in muscle tissue. COOL DOWN Cool-down is a low-intensity phase that allows the body to begin removing lactic acid, and other exercise by-products, which build up in muscles and contribute to soreness. Speed Time 24 25

15 WORKOUT SETUP STEPS With the interactive screen, the computerized display leads the user to step-by-step to input the workout. The screen would instruct the user to use the PROGRAM QUICK KEYS to enter the program, or use LEFT/RIGHT arrow keys to scroll to desired program when prompted in the screen. Use the LEFT/RIGHT arrow keys to enter the values. Press the SELECT key to confirm each selection, or press the CLEAR key to clear data not yet entered. Follow the steps to set up each workout. Quick Start Press the "QUICK START" key and the VALUE CIRCLE will display "3, 2,,GO. The workout begins at the lowest incline and speed, and the time counts 0 to the maximum time. Warm Up ) Press the WARM-UP key to enter the program. 2) SELECT TIME using the RIGHT and LEFT arrow keys to select and pressing SELECT key to begin a warm-up. Cool Down ) Press the COOL-DOWN key to enter the program. 2) SELECT TIME using the RIGHT and LEFT arrow keys to select and pressing SELECT key to begin a cool-down. Manual ) SELECT TIME using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 2) SELECT WEIGHT using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 3) Press START to begin the workout. Interval, Weight Loss & Fat Burn ) SELECT LEVEL using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 2) SELECT TIME using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 3) SELECT WEIGHT using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.. 4) Press START to begin the workout. 5K Run ) SELECT LEVEL using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 2) SELECT WEIGHT using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm.. 3) Press START to begin the workout. Target HR ) SELECT AGE using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 2) SELECT TARGET HR using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 3) SELECT CONTROL MODE using the RIGHT and LEFT arrow keys. * If SPEED is selected, the console will display "SET MAX SPEED. Use the RIGHT / LEFT key to set Max Speed. * If INCLINE is selected, the console will display "SET MAX INCLINE. Use the RIGHT / LEFT key to set Max Incline. 4) SELECT TIME using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 5) SELECT WIEGHT using the RIGHT and LEFT arrow keys to select and pressing SELECT key to confirm. 6) Press START to begin the workout

16 VIDEO MANAGER s CUSTOM MODE USING FITNESS NETWORKING The two RJ45 networking ports are available in the T8000E. These ports allow the treadmill to be connected to a fitness entertainment system and/or a fitness network, such as FitLinxx. C-SAFE PORT The C-SAFE port located next to the On/Off switch enables the treadmill to upload user workout statistics to a fitness network database. C-SAFE AUDIO-L AUDIO-R The Manager s Custom Mode provide two modes for the club manager. The MANAGER MENU allows the manager to set unit defaults, configure workout duration, set maintenance lamp distance, check error log, etc. The TV SETUP allows adjusting TV brightness, contrast, or sharpness. Also allows choice of TV system and favorite channel setup. To enter the Manager s Custom Mode, press and hold down the "INCLINE " and "SPEED " keys. Continue to hold down these two keys until the screen displays MANAGER MENU and TV SETUP.. To scroll the red bar in the list of Manager s Mode, use the SPEED / key. 2. To select a setting, press the SELECT key to enter. 3. To change the value of the setting, use the SPEED / key or LEFT / RIGHT arrow keys. 4. To confirm and save the value of the setting, press the START / SELECT key. SETTING SAVED will appear in the screen. To exit the setting without saving, press the CLEAR key over 5 seconds, or if there is no key pressed, the system will resume automatically. CARDIO PORT The Cardio port is located on the back of the console that is compatible with entertainment protocol such as Cardio Theater or BroadcastVision

17 MANAGER MENU CUSTOM SETTING DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION CUSTOM SETTING DEFAULT MINIMUM MAXIMUM UNIT STEP DESCRIPTION P0 MAXIMUM TIME 99 min min 99 min minute This option enables fitness club managers to set the program maximum workout duration limits during peak and non-peak hours of club traffic. Active variable displayed in the TIME display after change. P9 START SPEED 0.8kph/ 0.5mph 0.8kph/ 0.5mph 3kph/.8mph kph/ mph 0. Controls the starting speed for all programs (minimum speed not affected). Displayed in native units (kilometers per hour or miles per hour). Reverts to default value on unit change. P DEFAULT TIME 20 min min 99 min minute This option controls the default program time. P PAUSE TIME 60 sec 30 sec 80 sec second This is the maximum time during which a workout can remain in pause mode. P2 DEFAULT LEVEL n/a This option controls the default program level. P LANGUAGE English The language of the screen display, not including Manager s Custom Setting. P3 DEFAULT WEIGHT 68kg / 50lbs 34kg / 75lbs 82kg / 400lbs kg/lbs This option controls the default weight used in the calorie calculations. Sets to default unit change (kilograms or pounds). Displayed in native units. P2 SOFTWARE VERSION Software version is not editable, for display only. P4 DEFAULT AGE age This option controls the default users age used in the target heart rate calculations. P3 UNITS Metric Metric English The measurement unit type for weight, distance, and speed. P5 P6 MAXIMUM SPEED MAXIMUM INCLINE 20kph / 2mph 5 6.4kph / 4mph 4 20kph / 2mph 5 kph/ mph % Controls the maximum speed for all programs. Displayed in native units (kilometers per hour or miles per hour). Reverts to default value on unit change. This option changes the maximum incline grade to 4%, 8%, 2% or 5%. P4 P4- MAINTENANCE LAMP MAIN- TENANCE DISTANCE ON ON OFF 4000 km/ 2500 miles 4000 km/ 2500 miles 8000 km/ 5000 miles km/ miles This option enables fitness club managers to set the maintenance lamp as ON/OFF. When the treadmill's accumulated distance reaches the certain kilometers or miles, the maintenance lamp will light meaning maintenance is needed. P7 P8 ACCUMU- LATED DISTANCE ACCUMU- LATED TIME km/ mile hour Accumulated distance is not editable, for display only. Displayed in native units ( miles or kilometers ). Holding the INCLINE and SPEED keys simultaneously to reset the accumulated distance. After the treadmill reaches the maximu distance, it will reset to 0 automatically. Accumulated distance is not editable, for display only. Displayed in native units ( miles or kilometers ). Holding the INCLINE and SPEED keys simultanously to reset the accumulated distance. After the treadmill reaches the maximu distance, it will reset to 0 automatically. P5 P6 AUTO CHECK ERROR LOG P7 RESET ALL P8 MANUFAC- TURING TEST The function is to calibrate the treadmill s speed and incline after the completion of the installation. Error log is not editable, for display only. Holding the INCLINE and SPEED keys simultaneously to erase error log. The function would clear all custom settings had stored on the unit as a default value. Holding the INCLINE and SPEED keys simultaneously to clear all custom setting as a default value. The function is only for manufacturer use. 30 3

18 TV SETUP ADJUSTMENTS DEFAULT VALUE IF YOUR LOCAL SYSTEM IS NTSC, PLEASE SELECT LOCAL RF SYSTEM (RADIO FREQUENCY SYSTEM). SYSTEM SEARCH CHANNEL SEARCH (note 2) FAVORITE CHANNEL (note 3) SCREEN ADJUST RESET ALL TV SYSTEM (note ) VIDEO SYSTEM NTSC PAL / SECAM BLUE SCREEN CONTRAST SHARPNESS BRIGHTNESS TINT COLOR NTSC PAL / SECAM AUTO (FULL) ADD / ERASE RF SYSTEM AUTO (FULL) ADD / ERASE MANUAL SERACH NTSC PAL-B/G AUTO CATV OFF OFF Middle Value Middle Value Middle Value Middle Value Middle Value NOTE: ) TV SYSTEM: If your local system is NTSC, the TV SYSTEM only displays NTSC, NTSC-J, NTSC-US. If your local system is PAL or SEACM, the TV SYSTEM displays PAL-B/G, PAL-D/K, PAL-I,SECAM-L. 2) CHANNEL SEARCH: The built-in TV system can automatically memorize all the channels in your region. Channel search has a different setting in NTSC and PAL/SECAM. Please follow the steps according to your local TV system.. Enter RF System to select TV or CATV. TV means outdoor antenna connection; CATV means cable TV connection. 2. Press SPEED / to move the scroll to AUTO(FULL), and then press SELECT. The tuner will search through all available channels in your area and add them to the TV memory. Sometimes, it may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occurring around the area. You can manually add weak or additional channels or erase unwanted channels from TV memory. 3. Press SPEED / to move the cursor to ADD/ERASE, and press ENTER to add or erase the channels. 4. Press SPEED / to select which channel wants to add or erase. If ADD displays next to the channel number, it means this channel wasn't in the memory. Press SELECT to add this channel. If ERASE displays next to the channel number, it means this channel has already been in the memory. Press SELECT to erase this channel. IF YOUR LOCAL SYSTEM IS PAL OR SECAM, PLEASE FOLLOW THE STEPS BELOW.. Press SPEED / to move the cursor to AUTO(FULL), and press SELECT. The tuner will search through all available frequencies in your area and save them to the TV memory as a channel number in order. After pressing AUTO (FULL) search, you can manually erase unwanted channels from TV memory or add the erased channels back. 2. Press SPEED / to move the cursor to ADD/ERASE, and press SELECT to select the wanted or unwanted channels. If ERASE displays next to the channel number, press SELECT to erase this channel. If ADD displays next to the channel number, press SELECT to add this channel. Sometimes, it may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or the frequency jamming is occurring around the area. You can manually add weak or additional channels as a new channel number. 3. Press SPEED / to move the cursor to MANUAL SEARCH, and press SELECT to enter the MANUAL SEARCH screen. 3. Press SPEED / to move the cursor to SEARCH, and press SELECT to search the frequency. 3.2 When you select the frequency, press SELECT to confirm. 3.3 Press SPEED / to move down the cursor to SAVE AS A NEW CH, and press SELECT. 3.4 Press SPEED / to select a channel number, and press SELECT to save this channel number into TV memory

19 3) FAVORITE CHANNEL: Up to 50 favorite channels can be stored for a continuous selection during making channel up or down. TURN ON / OFF FAVORITE CHANNEL SETTING Press SPEED / to move the cursor to ON / OFF, and press SELECT to turn on/off the setting. SELECT FAVORITE CHANNELS. When Favorite Channel is ON, press SPEED / to move the cursor to ADD CH or ERASE CH and press SELECT to add or erase the wanted channels. 2. Press SPEED / to select which channel wants to add or erase. To ADD a channel, select the wanted channel numbers and press SELECT to add this channel. The channel will display in the list. If the wanted channel number has been in the list, it will display a sentence CHxx has already been in the list. To ERASE a channel, select the wanted channel numbers and press SELECT to erase this channel. The channel will remove from the list. If the wanted channel number was not in the list, it will display a sentence CHxx is not in the list. If the list has had 50 channels, it won't accept to ADD any channel. Unacceptable to add any channel will display in the screen, if adding a channel. If the list has a zero channels, it won't allow to ERASE any channel. No channel in the list, if trying to erase a channel. MAINTENANCE The T8000E built for use in the commercial environment - 2 hours a day and seven days a week. However, as a club manager or owner, you are responsible for cleaning and maintaining the unit s integrity. If you fail to maintain the treadmill as described below, it could affect or void the Johnson limited warranty. DANGER: To reduce the risk of electrical shock, always unplug the treadmill from its power source before cleaning it or performing any maintenance task. CAUTION: Any changes or modifications to this equipment could void the product warranty. NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until defective parts are repaired or replaced. RECOMMENDED CLEANING TIPS ) Use a damp, soft cloth with water or mild liquid detergent to clean all exposed surfaces. DO NOT use ammonia, chlorine, or acid-based cleaners. 2) DO NOT pour water or cleaning solutions on any surface. This could cause electrocution. 3) Check the operation of the emergency stop system once a week. 4) Wipe the user s contact areas, including console, HR handgrips, side handrails and side rails, after every use. 5) Brush away any wax deposits from the deck and belt area. This is a common occurrence until the wax is worked into the belt material. 6) Be sure to remove any obstructions from the path of the elevation including power cords. 7) Monthly, remove the motor cover to check for debris and clean with a dry cloth or small vacuum nozzle. Unplug the unit while executing this procedure

20 CENTERING THE BELT The Johnson Treadmill is built with a crowned roller to ensure proper tracking of the belt in the centre of the deck. An 8 mm Allen wrench (A 5/6-inch hex key wrench) is required for this task. The unit has access holes in the rear roller guards which allow access to the tensioning bolts. If the belt has moved to the left, turn the left tension bolt a /4 turn clockwise and then turn the right tension bolt a /4 turn counter-clockwise to start the belt tracking back to the centre of the roller. Before proceeding, please follow the centering belt procedure tips. ) DO NOT wear loose clothing or jewellery while making this adjustment. 2) NEVER have the tensioning bolts more than /4 turned at a time. 3) Tighten one side and loosen the other side to prevent from over-tightening or loosing the belt. Over-tightening the belt will significantly shorten the life of the belt. 4) After the belt adjustment, let the treadmill run for 5 minutes to test. If necessary, repeat the procedure until the belt is centered. If the belt has moved to the right, turn the right tension bolt a /4 turn clockwise and then turn the left tension bolt a /4 turn counter-clockwise to start the belt tracking back to the centre of the roller. /4 TURN /4 TURN Repeat the adjustments until the belt appears centered. Allow the treadmill to continue running for several minutes at 6.4 km/h (4.0 mph) to be sure that the tracking is stabilized. NOTE: DO NOT exceed one full turn of the adjusting screws in either direction. If after one full turn the belt does not track properly, please contact Johnson Fitness or the local authorized dealers. /4 TURN /4 TURN TENSIONING THE BELT Check the tension of the belt. The belt should be very snug. When a person walks or runs on the belt, it should not hesitate or slip. If this occurs, turn the belt tensioning bolts a /4 turn clockwise for each side. Repeat if necessary until the belt no longer slips. DO NOT exceed one full turn (i.e. four /4 turns) per side when adjusting the belt tensioning bolts. If after tension the belt, the belt still hesitates or slips, please contact Johnson Fitness or the local authorized dealers at once

21 PRODUCT SPECIFICATIONS /4 TURN /4 TURN NOTE: DO NOT over-tighten the tensioning bolts while making belt adjustments. Over-tightening of bolts may over stretch and damage the striding belt or roller bearings. DO NOT exceed one full turn of either bolt in either direction. MAINTENANCE LAMP There is a maintenance lamp on the console to remind the owner to do the scheduled maintenance. When the treadmill s accumulated distance reaches 4000 kilometers / 2500 miles, or the unit s accumulated time reaches 6000 hours, the maintenance lamp will light meaning maintenance is needed. The following is the maintenance lamp key: Still Blue Light: When the treadmill s accumulated distance reaches 4000 kilometers / 2500 miles, it means that the treadmill needs to be maintained. To turn off the maintenance light after performing service, hold the INCLINE and SPEED keys at the same time for 3 seconds. Flashing Blue Light: When the treadmill s accumulated time reaches 6000 hours, it means that the treadmill s running deck needs to be flipped. Every 2000 hours, the running deck needs to be replaced. After the deck is flipped or replaced, turning off the light to hold the INCLINE and SPEED keys at the same time for 3 seconds. Still Red Light: It means that the treadmill might have a problem, and needs to be checked. Please contact Johnson Fitness customer service or local authorized dealers. AND Model Console Display Screen Display Readout Programs On-the-fly Program Change Telemetric Receiver Contact HR Sensors Program Quick Keys TV Remote Control Keys Navigation Keys One-Touch Quick Start Pause Time Safety Stop Language Options Technical Data Drive Motor Motor Control System Speed Range Elevation Range Deck Deck Step Height Belt Area Belt Type Cushion System Rollers Side Handrails Foot Standing Platform Dimensions (LxWxH) Product Weight Max User Weight Power Requirement Special Features Integrated Accessory Tray Integrated Reading Rack Maintenance Lamp Swift Controls Panel Entertainment Solutions Built-in Entertainment System Built-in Headphone Jack Networking Capabilities T8000E 5 integrated TFT LCD display Time, Speed, Distance, Pace, Calories, Incline, Level, Heart Rate, Profile, Channel, Volume, Display Mode Manual, Interval, Fat Burn, Weight Loss, 5K Run, Target HR, Warm Up, Cool Down 30 seconds Push button with lanyard clip English, Italian, German, Spanish, French, Dutch, Japanese, Traditional/Simplified Chinese 3.2 hp DC Club grade DC controller km/h / mph 0 5% hard-wax reversible deck 20.6 cm / 8 5cm 53cm / 20" 63" Multi-ply Variable durometer cushioning system 7.6 cm / 3 Diameter, precision-crowned steel, front and back 56 cm (22 ) long, cantilevered, integrated Speed and Incline Control One piece extrude 26cm 87cm 39cm / kg / 365 lbs 82 kg / 400 lbs 0V 230V dedicated circuit required CSAFE ready, Fitlinxx certified *Product specifications are subject to change without notice