GREGORY Commercial Furniture. Company Profile.

Transcription

1 Company Profile

2 Ergo-eco Logical Gregory is part of the Inventis Group which is publicly listed on the ASX (IVT). It was established in 1988 by Peter Gregory, a practicing Physiotherapist. In 2002, GCF acquired Pluto, encompassing Atlas Healthcare. In 2007 Gregory acquired Damba Furniture Australia and New Zealand, which makes us the largest commercial seating manufacturer in Australasia. At Gregory (GCF) we have a strong history of being a leader in innovative ergonomic design, standards and high quality manufacturing processes. We develop and manufacture a comprehensive range of products that offer the highest quality ergonomic furniture solutions by: Why Choose Gregory? Value for Money Reliable Established since 1988 with an experienced and dedicated team Highly skilled sales team and after sales service One Stop Shop Extensive range of Task, Executive, Visitor, Lounges, Feature Seating, Healthcare, Systems, Desking, Tables and Storage Ergonomic Seat Technology 5 day trial chair program Ergonomic design and professional endorsement Australian Design Award Flexible Ability to offer customised solutions Innovative Products Continued Research and Development Committed Marketing Collateral Certified ISO 9001 quality assurance AFRDI certified products GECA certified products Green to the Core GECA Certified Products Member of the Green Building Council ErgoFit A simple diagnostic outcome, which suggests a chair configuration which would be well suited to the individual Service Solution Fit out solutions, Asset Management, Cleaning and Ergonomic Assessments, Repairs & Maintenance Reducing occupational health and safety risks Increasing staff productivity Incorporating modern office design and finishes Green to the core At Gregory (GCF) ergonomics is important, so is the environment. We are committed to continual improvement in our manufacturing processes to ensure the benefits of sustainable design cover all aspects of the product lifecycle; from product selection, to production methods, reduction of waste and the recycling of components at the end of their life span. GCF is a member of the Green Building Council of Australia. Ergonomic to the core Ergonomics is about fitting the environment to the human form. Ergonomic seating has become critical today because the average office worker spends up to 80% of their time seated in a chair. The word ergonomic is derived from the Greek word ergon (work) and nomos (laws) to denote the science to work, ergonomics is the study of adjusting the environment to suit people; especially the science that seeks to adapt the working conditions of the individual. To assist in being our most productive and creative GCF focuses our resources on adapting the work environment to the human form. Experience Over the years GCF has established relationships with a wide variety of market segments including: Federal, State and Offering comprehensive product warranties, and Delivering great customer service Local Government, Health & Aged Care, Corporate, Retail, Private Institutions, Educational Facility s, Builders, Project Managers, Architects and Designers. We have recently been awarded an exclusive contract to provide all furniture to the District Health Boards throughout NZ and we are a panel member for the Queensland SOA No GQCPO Part A & B Government Contract for the supply of fixed height and adjustable seating It s worth a Gregory Injury-prevention, coupled with good ergonomic design in the workplace, has been shown to: lower workers compensation costs reduce the amount of time lost due to injury increase morale and productivity We work closely with: Architects and Designers, Facility Managers, Purchasing Managers, OH&S professionals, Risk Managers, Medical Practitioners, Human Resources, Occupational Therapists and Ergonomists. GCF have Business Development Managers based in most Capital Cities in Australia and New Zealand. Sydney Auckland

3 Green to the core Gregory are committed to providing a superior product, whilst minimizing adverse impacts to the environment. We care about the environment and not only recognise but appreciate that our operations may have an impact on the environment locally and ultimately globally. At Gregory we believe it is our obligation to consider all aspects of our products impact on the environment, throughout their lifecycle, this includes: Raw material selection, sustainable production methods, reduction of waste and pollution during our manufacturing process and recycling of used components at the end of their life cycle. Our Australian factory meets the requirements of GECA certification which is aligned to international standard ISO 14024: Environmental Labels & Declarations - Guiding Principles Our products are designed to meet the following criteria: Environmentally sustainable design focus GECA approval Focus on helping you achieve Green Star credit points End of Life - Chair Take Back Policy Meets Australian and New Zealand Quality Standards Licence No: GCF-2007 & GCF-2008 Standard: GECA Furniture and Fittings We Stand Behind Our Quality Gregory (GCF) is certified to ISO We have maintained this certification for over 15 years and we continue to develop and improve our systems and processes. Our primary objective is to provide products and services in a manner which satisfies our customer expectations and the relevant statutory authority regulations by a commitment to company standards which are based on sound and accepted techniques. To ensure these objectives are achieved requires all personnel to be united in maintaining an effective and efficient quality management system for our products and services. Among our credentials GCF offer: 5 Year warranty (extended warranty s are also available) Quality Endorsed Company ISO 9001 Federal Government Supplier AFRDI certified products Panel member of Queensland Government SOA No GQCPO Part A & B Government Supplier Exclusive contract with all the District Health Boards throughout NZ GECA Certified products Winner of an Australian Design Award For a minimal fee a GCF representative can perform an on site audit of all seating, every 12 months for the life of the contract. The Audit inspection will follow the below criteria and reporting structure. 1. All Gregory chairs under warranty can be repaired on site (conditions apply). 2. All Gregory chairs out of warranty that require repairs or replacement will be reported by number, product and position in the office including cost of repair or replacement to the nominated staff member. 3. A report detailing product and position in the office of all non-gregory chairs under warranty will be given to the nominated staff member. 4. A report detailing cost of repair, product and position in the office of all faulty and out of warranty) non-gregory chairs will be given to the nominated staff member. Cleaning For a minimal fee cleaning of seating can be carried out simultaneously with the Condition Audit and Maintenance Program. We intend to remove stains, graffiti and the like off of the seating, where possible. Services Gregory Provide Complete Fit out Solutions M3 Asset Management Desking and workstation solutions Space planning Asset Managment by Gregory M3 Asset Management, Condition Audit & Maintenance Program The GCF M3 Asset Management Program will provide you with an accurate summary of furniture and its location. This service includes all products being bar coded. The Condition Audit & Maintenance Program will prolong the life of your chairs, minimise minor faults, and in the long run, save you money by maintaining safety in the workplace. Condition Audits Service and Maintenance program Cleaning of chairs Repairs and re-upholstery service Consultancy service for sourcing products Ergonomic assessments 5 day trial chair program Design consultancy ErgoFit assessments Training and chair fitting service when chairs delivered Project Management Account Management and Service Support in all states

4 Our Experience Express Options Some of GCF s clients who we have National Supply Contracts or Preferred Supplier Status includes: Australian Tax Office Centrelink Medicare Commonwealth Rehabilitation Services Child Support Agency Australian Customs Department of Agriculture, Fisheries and Forestry Comcare Climate Change The Treasury Queensland Government SOA Panel Member University of New South Wales University of Technology Sydney Australian Federal Police AMP Johnson & Johnson ANZ retail branches Mars BOC Fuji Xerox NSW Road Transport Authority Westpac/ St George / Bank of SA (thru CE) Bank of Queensland Advant Mutual Macquarie Bank United Group Rail Bechtel Gregory builds each chair to our customers specifications, however we are aware that some clients are in a hurry to improve their working environment and sit on a Gregory chair so we provide a 48 hour ex factory lead time on our most popular ranges; Inca Dual Density Posture Support Boxta Dual Density Posture Support C02 Standard Deluxe Medium and High back with standard size seat in a selection of colours (see below) To request a quote or place an order for a Gregory express chair just contact our Sales Support team on: P: 13 ERGO ( ) or E: sales@gcfau.com.au It is so simple! After 48 hours your new Gregory chair will be on its way to you so you can enjoy the Gregory experience. * Please allow up to 5 days for delivery if the item is not being collected from the factory. District Health Boards Police in partnership with Precision Labtests Tertiaries nationwide Department of Defence How we have helped... Our clients are amongst the greatest icons of Australian and New Zealand commerce and government bodies. GCF can develop products to suit clients individual requirements: AMP - ANZ - AU Hospitals- NZ Hospitals - UNSW - RTA - issue: chair to suit all staff requirements that was an alternative to the GCF Dual Density seat solution: develop a new task chair with unique seat technology, X-Cell Comfort supply: 300+ units over the past 2 years issue: damage to furniture in branch client areas and looking tired, supply of visitor chairs solution: redesign ottoman structure, foam and fabric to withstand the environment supply: 400+ units over the past 6 years issue: patient transport chair to hold 200kg weight and enable staff to move solution: developed chair to hold 200kg and fit bed mover device so staff can maneuver. supply: 300+ units over the past 8 years issue: one stop shop for all furniture requirements solution: provide desking, storage, lounges, beam seating and healthcare specific products issue: one stop shop of seating requirements and work with OH&S issues and on site training solution: supply contract supply: 300+ over the past 1 year issue: OH&S approved chair which offers variety of options and has a consistent look solution: Boxta range with small, medium large seat, medium and high back, heavy duty kit supply: 500 per annum over the past 10 years

5 MyChair Tri-Tek Gregory s latest seat technology Why it works: MyChair program enables you to build your own chair to suit your specific needs. Select the back to suit your back shape, select the seat technology to provide you with ultimate comfort and correct posture then choose base, arm and accessory options to build MyChair. Features: 3 lever mechanism AFRDI level 6 certified * GECA certified * Ratchet back height adjustable Options: Small, standard or large seat * With or without arms Heavy duty kit * Glides Brake castors Soft tyre castors Aluminium base Seat slider Drafting Tri-Tek reduces pressure under the thigh by centralising the weight to under the ischial tuberosities (sitting bones) where there is less tissue and arteries. The tear drop shape internal foam cores placed under the ischial tuberosities are contoured internally to flex which balances the weight of the user promoting a healthy S curve in the spine. The unique contouring of the seat and waterfall front acts as a forward seat tilt. This assists to open the pelvis and balance your head, spine and pelvis and promote a healthy S curve in the spine. Anti-bacterial moulded foam X-Cel Comfort A unique seating experience which allows consistent weight distribution Why it works: 4 easy steps Evens out weight distribution through the individually placed pocket springs, thereby maintaining correct seating posture. Reduces seat temperature with a well circulated air flow under the seat. Designed by world renowned innerspring manufacturer (as used in mattresses). Anti-bacterial moulded foam 1 Choose style Dual Density boxta inca slimline scope Gregory s famous seat technology Why it works: 2 Choose back height boxta back inca back ~ slimline back scope back The pelvis gently sinks into the seat and is supported in the softer section at the back of the chair. The firmer foam at the front prevents the pelvis from sliding forward. The spine is maintained in the healthy, upright S curve of good posture. A shaped waterfall front edge improves circulation behind the thighs. The original award winning design. Anti-bacterial moulded foam 3 Choose any seat technology tandard Deluxe tandard Deluxe Standard Deluxe Great entry level seat technology Why it works: 4 Choose fabric & accessories Back of the seat is contoured so you sit into the seat. Pommel at the front to direct the legs in the correct position. Waterfall at the front of the seat to reduce pressure under the thighs. Anti-bacterial moulded foam chrome base arms drafting castors * Available on selected models only. ~ Also available with extra high back. Please contact Gregory for details & pricing.

6 The tear drop shape represents internal foam cores and highlights were your Ischial Tuberosities should sit. Pommel at the front discourages user crossing legs. The unique waterfall front reduces pressure under the thighs Tri-Tek Pressure Reduction Technology ^Tri-Tek Pressure Reduction Technology is the latest seating design from Gregory. Tri-Tek has been in development for over 2 years in conjunction with renowned international ergonomists, occupational therapists and our in-house design team to provide the user with increased support and comfort. Tri-Tek is proud to have been a finalist in the 2011 Australian International Design Awards and holds the Good Design trade mark. GCF designed Tri-Tek by conducting the following investigations: Research Industry Experience to enhance the design User Trials Pressure Sensor Pad Trials Research Up to 90% of people have poor posture, which puts extra pressure on the spine and can lead to fatigue, back pain and headaches. Bad posture can also compress internal organs, resulting in issues such as respiratory problems, chest tightness, high blood pressure and poor digestion. We do know that the skin and fat tissues under the ischial tuberosities or sitting bones is less sensitive to pressure than the muscle tissue surrounding the tuberosities and better suited to carrying load than the other tissues of the buttocks and thighs *. When a seated posture is assumed the majority of the body s weight is placed upon the supporting area of the ischial tuberosities of the pelvis and the tissues in their proximity **. As a person sits the pelvis rotates backwards, the lumbar spine may flatten, and the ischial tuberosities become the main weight-bearing structure in close contact with the seating surface ***. The Journal of the Royal Society of Medicine 2008 concludes that prolonged seated immobility at work may represent a risk factor for VTE (Venous Thromboembolism) and Deep Vein Thrombosis (DVT). What did the research tell us? Design a chair that: Improves blood circulation around the lower extremities. Focus the weight loading under the ischial tuberosities where there is less tissue and arteries. Balances weight correctly to assist in opening the pelvis and promote a healthy S curve in the spine by balancing the head, spine and pelvis. Design Tri-Tek Pressure Reduction Technology is focused on providing the user with increased support and comfort. The design of Tri-Tek is to improve blood circulation by focusing the weight distribution under the ischial tuberosities which corrects the distribution of seated pressure. Specific attention was given to the design of the tear drop shape inner foam cores which assist in the main weight loading over the ischial tuberosities. The cores encourage even weight distribution and the forward tilt of the pelvis, which promotes a healthy S curve in the spine. Tri-Tek is made up of 3 unique foam cores that vary in shape and by up to 20% in foam density. The unique shaping of the tear drop foam cores effectively provides an innovative flexible movement that improves the transition across the different densities. The unique contouring of the seat surface encourages the thigh to sit correctly and promotes a forward seat tilt whilst the seat is flat. The seat angle assists with opening the pelvis angle which balances the head, spine and pelvis and promotes a healthy S curve in the spine. The pommel at the front discourages the user from crossing their legs which reduces circulation to the lower extremities. Of significant importance is the unique waterfall shape front of the seat which alleviates pressure under the thigh which then encourages blood circulation through the lower extremities. Tri-Tek Pressure Reduction Technology is easily recognisable due to the visual cue of the tear drop shape internal foam cores. The unique contouring of the seat surface encourages the thigh to sit correctly and promotes a forward seat tilt whilst the seat is flat. The seat angle assists with opening the pelvis angle which balances the head, spine and pelvis and promotes a healthy S curve in the spine. The pommel at the front discourages the user from crossing their legs which reduces circulation to the lower extremities. Of significant importance is the unique waterfall shape front of the seat which alleviates pressure under the thigh which then encourages blood circulation through the lower extremities. Tri-Tek Pressure Reduction Technology is easily recognisable due to the visual cue of the tear drop shape internal foam cores. *(Reed et al. 1994),**(Schoberth, 1962; Chaffin et al.,1999), ***(Andersson et al.,1979; Congleton et al., 1988; Chaffin et al., 199; Sember, 1994). ^International Patent Application No. PCT/AU2010/ ^International Patent Application No. PCT/AU2010/001715

7 User Trials In 2010 GCF began user trials for Tri-Tek in Australia and in New Zealand. The NZ trials were overseen by Prof T W Cunniffe PhD, FIEHF, MDINZ - Patron Member NZErg. The user trial group consisted of a cross section of different height and weight users and their activities were a mix of computer and clerical duties. As part of the user trial it was a requirement that all participants spent the majority of their work time sitting. The users were provided with a Tri-Tek ergonomic chair for trialing for 10 days. The participants recorded their comfort rating every hour whilst sitting on the Tri-Tek seat. 98% of the group found the Tri-Tek seat very comfortable and in fact some of the users had chronic back pain and by sitting on a Tri-Tek seat their back pain disappeared. One user had DVT and found sitting on Tri-Tek improved their condition. The users also noted that the range of options available provided for a variety of different height and weight users. Leading Physiotherapists and Occupational Therapists also assessed the chairs on a more technical level Cheryl Wegner from Safety Matters comments were: Tri-Tek cushion positioned with seat pan parallel to the floor was observed to increase the hip angle of the user to slightly greater than 90 degrees due to the to increased cushion density underneath the sitting bones, and cushion sloping away towards the front of the seat pan(thus raising the ischial tuberosities slightly higher than the knees). Many ergonomic researchers are in agreement that open hip angles (angles greater than 90 degrees) and reclining postures results in less lumbar pressure, however a subjective observation on my part through years of assessing sitting postures at workstations is that when the spine is upright with head balanced on top of the spine, an improved spine balance can be achieved by angling the seat pan forward (opening the hip angle) rather than reclining the chair back, as a forward sloping seat pan supports a more standing like posture of the spine and maintains an upright balance of the spine, allowing workers to easily access their workstation equipment without reaching, and subsequent static loading of muscles of their upper arms / shoulders, upper back and neck, potentially resulting in other musculoskeletal issues. These assessments, the user trial feedback and detailed evaluations from industry professionals have provided GCF with valuable feedback to refine the seat technology design even further. some of the users had chronic back pain and by sitting on a Tri-Tek seat their back pain disappeared In most office chairs the body weight is spread throughout the seat pan thus restricting blood flow to the lower extremities. Tri-Tek reduces pressure under the thigh by centralising the weight to under the ischial tuberosities (sitting bones) where there is less tissue and arteries. The tear drop shape internal foam cores placed under the ischial tuberosities are contoured internally to flex which balances the weight of the user to under the ischial tuberosities therefore promoting a healthy S curve in the spine. Key Features and Benefits of Tri-Tek Pressure Reduction Technology The unique contouring of the seat and waterfall front acts as a forward seat tilt without feeling like you are slipping out of the chair. This assists to open the pelvis and balance your head, spine and pelvis and promote and healthy S curve in the spine. Moulded foam seat with anti-bacteriaside. ^Patented design ^International Patent Application No. PCT/AU2010/001715

8 Tri-Tek will assist with improving your well being and posture give your ass a taste of luxury Tri-Tek Pressure Reduction Technology sensor trial Sensor Pad Trials GCF are pioneers in ergonomic seat foam technology. As part of the user trial evaluation GCF invested in pressure sensor pads to conduct supervised in house testing. The pressure sensor pads provided us with valuable data on peak pressure area and how weight is distributed whilst pressure is applied. The sensor pad trial was conducted at our Sydney office and was overseen by Cheryl Wegner, Director of Safety Matters. Cheryl has a Bachelor of Science in Occupational Therapy and a Masters in Safety Science from the University of New South Wales and is a member of the Australian Occupational Therapy Association and the Australian Ergonomic Association. With over 20 years experience as an Occupational Therapist Cheryl has extensive knowledge in a variety of medical fields and now specializes in occupational health and safety, ergonomics and injury management. The sensor pad trial was conducted with one person assessed whilst seated in an ordinary seat then sitting in a Tri-Tek Pressure Reduction Technology seat. As you can see from the following results whilst sitting on a Tri-Tek seat the pressure load under the thigh area 1 is very low compared to an ordinary seat foam 3. Reduced pressure under the thigh area has been proved to increase blood circulation through the legs and back to the heart. You will also notice from the sensor pad images that the pressure readings 2 are focused around the ischial tuberosities (sitting bones). It has been proved that there is less tissue and arteries under the ischial tuberosities which is why concentrating the majority of your seated weight in this area will assist with better circulation to your lower extremities and back to the heart. It was also identified by Cheryl Wegner that due to the contouring of the seat surface and the placement of the unique tear drop shape internal foam cores under the ischial tuberosities (sitting bones) that sitting in the chair with a flat seat assisted with tilting the pelvis which promotes the healthy S curve in the spine. With Tri-Tek Pressure Reduction Technology 1 Without Tri-Tek Pressure Reduction Technology Tri-Tek Pressure Reduction Technology sensor trial, image 1 Red area 4 represents the peak pressure area of heaviest weight loading. This is where the ischial tuberosities (sitting bones) are located. Dark Blue 5 shows the least weight loading. Ordinary seat foam sensor trial, image 2 Reduced red area 6 indicates that the peak pressure area weight loading is spread over a larger area with increased pressure under the thigh area. To create the same pelvic tilt in the ordinary seat we needed to tilt the angle of the ordinary seat forward considerably which then resulted in the user slipping forward and out of the chair. As with all desk bound activities GCF strongly encourages people to regularly take breaks and walk around to encourage blood circulation. You can be confident that whilst sitting in GCF s Tri-Tek seat not only will you be sitting in luxury but Tri-Tek will assist with improving your well being and posture. As an added safe guard GCF has included an anti-bacteriaside in the seat foam to reduce the risk of bacteria spreading in the Tri-Tek seat. Tri-Tek Pressure Reduction Technology is available in the MYCHAIR program from GCF. MYCHAIR provides the user with the ability to develop a complete chair to suit their individual needs. To trial a Tri-Tek pressure reduction technology chair contact: AU: 13 ERGO ( ) NZ:

9 healthy, upright S curve of good posture which also creates less stress on the arms, shoulders and neck throughout the day. How we can help Most of Australia s top 100 companies have used Gregory as their task chair or as an aid for staff with back or work related injuries. Manufactured in Australia, Gregory chairs are recognised by ergonomists and OH&S professionals as providing the best possible seating solution for the modern office and an extremely high level of comfort. Research Gregory has used scientific evaluation in the testing of its Healthy S curve this shows the head is properly balanced to indicate how the spine sits over a period of time. Thermographs show surface temperatures to indicate the difference in blood flow in the body over a period of time in a Gregory chair compared to an ordinary chair. Dual Density Posture Support Ergonomic to the core Ergonomics is about fitting the environment to the human form. Ergonomic seating has become so important today because the average office worker spends up to 80% of their time in a chair. The work Ergonomic derived from the Greek ergon (work) and nomos (laws) to denote the science to work, ergonomics is the study of adjusting the environment to suit people; especially the science that seeks to adapt work or working conditions to suit the worker. To be at our most productive and creative, the environment needs to be matched to the human form. Good posture is maintained throughout the day; oxygen intake is improved; blood flow to the legs is increased productivity and concentration is enhanced; and general health and well being are improved. The Challenge People are not designed to sit for long periods of time. Just as a pyramid cannot rest on its apex without succumbing to the forces of gravity, nor can the pelvis carry the weight of the body without slipping forward and creating unnatural pressure to bear on the spine. This forward movement of the pelvis causes the spine to form a C curve creating significantly more pressure on the vertebrae and back muscles. A unique solution was required which prevented the forward movement, maintained the natural S curve of the spine whilst also maximising blood circulation throughout the lower back and legs. It s worth a Gregory Our story began in the mid 1980 s when physiotherapist and company founder, Peter Gregory, was commissioned by Colgate-Palmolive to investigate injuries in the office workplace. The culmination of his research was the unique and patented Dual Density Posture Support System, which has been recognised by ergonomists and occupational health and medical professionals as providing a superior seating solution for improved office efficiency. The Design Peter Gregory s findings led to a patenting the award winning Gregory seat design Dual Density Posture Support. Dual Density features firmer foam in the front half of the seat and softer foam in the back half. The separation of the two foam densities is indicated by the split. The pelvis gently sinks and is supported in the softer section in the correct seating position at the back of the chair. Firmer foam at the front discourages the pelvis from sliding forward into the slouching C curve of poor posture. Based on results of ergonomic evaluation the Dual Density range of chairs have proven to be superior in reducing OH&S risks, looking after employee well-being while providing exceptional comfort. A complete family of chairs that suit a whole range of people with small, standard and large seat options. Large seat chairs can be fitted with a heavy-duty kit to support up to 160kg and heavy-duty use. Benefits of the Gregory Posture Support System Decreases: pressure and stress on the spine injuries due to this pressure fatigue caused by poor posture insurance claims, therefore improving company profitability absenteeism Increases: lifestyle- if your back is healthy, so is your life productivity-people work better when they are comfortable. company morale-if staff feel management are looking after them, they will be happier and more loyal. More oxygen in the blood increases concentration. Lungs are able to expand better with good posture. concentration Ordinary chair Surface temperature is a function of the heat imparted by the body s circulation system. This means that warmer temperatures on the body s surface shows greater blood flow in the measured area. The Ordinary chair shows lower surface temperature which means less blood flow and less comfort. Small changes in surface temperature indicate larger changes in the deeper tissues. White areas show increased blood flow. Gregory chair Temp 34.3 Gregory Dual Density Posture Support Ordinary chair Temp 33.4 Thermographic images produced by Thermal Imaging Services Pty Limited February 2005 Office chair design provided partial solutions through enhanced lumbar support, however this does not prevent the pelvis from tending to slide forward. The moulded foam also encourages and improves blood circulation behind the thighs. With the added height adjustable lumbar support the spine is maintained in the firm foam soft foam

10 Gregory Seat Technology In sitting the optimum pressure occurs when body weight is distributed as 65% to the chair seat, 4% to the backrest, 12% to the armrests, and 18% to the supported feet. Prof TW Cunniffe X-Cel Comfort Unique comfort through individual pocket springs that follow the natural contours of your body. The pocket spring provides independent support as they are individual springs and individually wrapped so they contour to your body. When you move the springs respond and move with you. Each spring will adjust to the weight applied allowing even weight distribution. Pressure points inhibit flood circulation which can cause discomfort. X-Cel Comfort Seat Technology provides you with a well supported seat cushion which prevents bottoming out. X-Cel Comfort Seat Technology can be fitted to the MyChair range of task chairs. Gregory use a moulded foam contoured seat in X-Cel Comfort which has an antibacteriaside to prevent bacteria spreading. Why it works: Evens out weight distribution through the individually placed pocket springs, thereby maintaining correct seating posture. Reduces seat temperature with a well circulated air flow under the seat. Designed by world renowned innerspring manufacturer (as used in mattresses). Ergonomics GCF offer an office assessment program where we can work with each staff member to setup their workstation correctly. Our staff will visit your office and discuss your options which may include utilising one of our qualified consultants. The assessment covers: Workstation setup Position of monitor and keyboard Setup of task chair Workflow analysis Equipment usage Accessories used and required Light and air circulation readings This is how some sit tandard Deluxe Standard Deluxe Gregory s Deluxe Seat uses moulded foam with anti-bacteriaside in it to prevent the spread of infection in the seat foam. The contour of the seat is dished to form to the shape of the user with a waterfall at the front which alleviates pressure at the front of the thigh. Why it works: Back of the seat is contoured so you sit into the seat. Pommel at the front to direct the legs in the correct position. Waterfall at the front of the seat to reduce pressure under the thighs. Anti-bacterial moulded foam Support Ergonomics 4 out of 5 people (80%) will have serious back pain at some stage of their life*. Back pain is responsible for more loss of work time than any other aliment. The cost and time lost for office type injuries is lowest in number in workplace injury however it has the highest average cost per claim ($23,957)*** Why is an ergonomic environment important in your office? It reduces error rates and increase productivity It reduces absenteeism and staff turnover It improves morale It reduces injuries and discomfort This is how we can rectify it *Epidemiology of neck and back pain. The scientific evidence of causes diagnosis, and treatment. *** WorkCover NSW Statistical Bulletin 2000/01

11 ErgoFit What is ErgoFit? ErgoFit is a method of determining the right chair for each individual in an organisation. Contact one of our team to have a ErgoFit assessment conducted. How does ErgoFit work? ErgoFit is a simple questionnaire format which determines key ergonomic issues and personal preferences and needs. ErgoFit provides a simple diagnostic outcome, which suggests a chair configuration which would be well suited to the individual. Facts: Professor Cunniffe* states When sat correctly, the distribution of body weight is 65% seat, 4% backrest, 12% armrest and 18% supported feet. Good seating design accommodates the problem of sitting pressure by ensuring its controlled distribution. This is achieved by contouring the body contact areas of the chair. Of equal importance are chair size, range of adjustment and level of upholstery. These features also contribute to good user posture. * Professor T W Cunniffe PhD, F ErgS, MDINZ, Ergonomic Specialist. For more info go to Accessories GCF offers a wide range of accessories: Heavy Duty Kit, this reinforces the chair to allow for a heavier weight load Seat slider, this increases the seat depth Small, medium and large seat sizes Drafting conversion with footring, for bench height desks Glides for a static position Inflatable lumbar support, this is an option in your chair to increase the lumbar area. Soft (non-marking) and hard wheel brake castors, when pressure is applied the castor will move. Arm and base options Foot stools Monitor stands

12 Product Warranty Terms of Warranty Gregory Pty Limited warrants products for a period of either one (1) or five (5) years to be free from defects in material and workmanship. Gregory Pty Limited liability under this warranty (and any warranty that is implied and can only be limited as permitted by law) is to repair or replace (at its discretion) any part or product covered by this (or any implied) warranty free of charge. To the extent permitted by law, this warranty does not cover: 1. Normal wear and tear 2. Fabric (as this is normally specified by the customer). However, the fabric warranty provided by the supplier applies 3. Damage arising from abnormal use, or abuse 4. Products which have not been maintained as recommended by Gregory Pty Limited, or which have been modified 5. Any indirect or consequential loss 6. Transport charges to return the product to Gregory Pty Limited for repair or replacement This warranty applies only to the original purchase. All works carried out by a party under instructions from Gregory Pty Limited will be covered by the five year warranty on workmanship and repair. If the workmanship of the repair is deemed by Gregory Pty Limited to be faulty a new chair will be provided. To the extent permitted by law, all other warranties, express or implied, are excluded. Gregory Pty Limited. Most Gregory products carry either a five (5) year warranty or one (1) year warranty, please check at time of quotation or order.

13 australia Gregory Pty Limited ABN PO Box 6765 Blacktown BC NSW 2148 Australia phone: 13 ERGO ( ) fax: (02) new zealand Gregory (NZ) Limited CN PO Box South Auckland Mail Centre Manukau 2240 New Zealand phone: fax: