Temperature. Pressure. Humidity. Consultation & Training Services. Electrical. Certus Metrology
|
|
- Adam Owens
- 5 years ago
- Views:
Transcription
1 Temperature Pressure Humidity Electrical Consultation & Training Services Certus Metrology
2 CONTENTS Introduction...2 About the Director...3 Consultation and Training Service...4 Temperature Calibration Service...6 Humidity Calibration Service...10 Pressure Calibration Service...12 Electrical Calibration Service...14
3 certus CalibraTION ServICES You CAn count on Certus for: ConSISTEnCY We address every variable of our measurement process to assure consistency of calibration results, which leads to accurate results in your processes, products and services. Environmental Controls Certus laboratories environmental conditions are strictly monitor and control. Finest Equipment For each measurement quantity, Certus possesses the finest calibration equipment available. Highly Skilled Metrologists and Technicians Certus has a highly trained staff of metrologists and technicians capable of making precise measurements and monitoring calibration processes. Measurement System Certus s measurement system is constantly reviewed. Our multiple reference standards are directly traceable to National and International standard. ConfIDEnCE Certus assures its consistency through independent verification because CERTUS is Certain. Accreditation Certus s Calibration System comply to ISO/IEC standards. Documented Procedures Procedures are documented for every step of the calibration process. Inter laboratory comparison / proficiency testing Certus participation in proficiency testing enables the laboratory to assess and demonstrate the reliability of the resultant measurement data by comparison with results from other participating laboratories. CoMMITMEnt Certus committed to provide an extra miles to our customers. Attitude - To being polite, patient, and thorough. Respond - We commit to timely and comprehensive responses. Solve - We commit to helping you resolve technical issues to your satisfaction. Feedback - We listening to your feedback. 2 Certus Metrology
4 About the Founder & DirECTOr TJHANG HENDRI - is a Founder and Director of PT. Certus Metrology Indonesia. He holds a Bachelor of Engineering (Mechanical Engineering) Degree from Trisakti University, Jakarta and Master of Science (Mechanical Engineering) Degree from Nanyang Technological University, Singapore. Using his knowledge, expertise and skills, he is serving as a Technical Assessor for Accredited Laboratory in area of calibration and measurement in Singapore, Member of Metrology Society of Australia and Member of Institute of Physic, London. He has more than 10 years of experience in the calibration and measurement and has received training in temperature, pressure, humidity and ISO related courses in Singapore and United Kingdom. Previously, joined a private calibration laboratory in Singapore specialize in temperature, pressure and humidity as a Business and Development Manager cum Head of Laboratory for years. Throughout his career as Head of Laboratory in Singapore, he has numerous contributions to the laboratory by developing the technical capability on their existing fields in additions the new fields of electrical and airflow calibration. And have design a wind tunnel for airflow calibration facility and developing Microsoft Excel based calculation software for infra red thermometer calibration. His passion to the metrology has given him a wide opportunity by opening his own laboratory, Certus Metrology IndonesIA to pursue further innovation and give the customer assurance quality of services. 3
5 training & consultation SERvICES Our qualified and experienced trainers had put together of experience and expertise to help industries grow through our training program and consultation. Consultation & Training Services 4 Certus Metrology
6 Certus s training syllabus is built around our core business which is Temperature, Humidity, Pressure and Electrical. Our qualified and experienced trainers had put together more than 10 years of experience and expertise will benefit the industries to grow through our training session and consultation. Our training could also be tailored to your location, your specific requirement and at your convenience. Facility and EquIPMEnt Environmental monitor and control Temperature, Humidity, Pressure and Electrical laboratory fully equips with the state-of-the-art Reference standards. Training room with projector and screen. ProCESSES Certus can offer standard and custom training program in area of our core business and expertise. In additions, Certus also extend its service to a measurement solution, setting up a new calibration laboratory, reference standards commissioning or technical assessment for newly set up calibration laboratory. training and consultation ServICES INCLUDE: Resistance Thermometry Fixed Point Thermocouple Thermometry Resistance Thermometry Radiation Thermometry Liquid In Glass Thermometry Temperature and/or Humidity Enclosure Humidity measurement and calibration Pressure measurement and calibration Consultation on setting up calibration laboratory Consultation on measurement solution Commissioning Technical assessment for newly set up calibration laboratory Couldn t find what you looking for from above list, please consult with us for your specific requirement 5
7 temperature Temperature Calibrations from -35 C to 1200 C, Comparison calibrations or selected fixed points for all of your resistance temperature measuring devices including Semi Standards PRT s, RTD s, thermistors, digital readouts, calibrators, liquid-in-glass thermometers, radiation thermometer and thermocouples. Temperature 6 Certus Metrology
8 Certus s Temperature Calibration Laboratory utilizes the most advanced equipment and training to provide the lowest temperature measurement uncertainties available in the market place. Certus s Temperature Laboratory is ISO/IEC compliant for temperature calibrations. Certus offers a complete range of temperature calibration services from -35 C to 1200 C for Semi Standard PRT s, RTD s, Thermistors, Thermocouples, Digital Readouts, Radiation Thermometer and Liquid-in-Glass Thermometers. Facility and EnvironMEnt Certus s Temperature Calibration Laboratories meet strict ISO/IEC guidelines. Environmental conditions in the Laboratory are strictly monitored and controlled. EquIPMEnt Certus s Temperature Calibration Laboratory is outfitted with the latest stateof-the-art equipment for fixed point and comparison temperature calibrations. Equipment includes an High Precision Thermometer Indicator, a variety of cells covering two temperature fixed points (Ga and H 2 O), high precision standard resistors, blackbody source and calibration baths (Alcohol, Oil, and Block). ProCESSES Certus can tailor a calibration for your temperature-measuring device from primary fixed point calibrations for calibrating in-house temperature standards and high precision temperature devices to secondary comparison calibrations for less accurate temperature measuring devices. All temperature standards are traceable to the National and International. 7
9 TEMPErATure CALIBrATIon ServICES InCLuDE: Temperature calibration services from -35 C to 1200 C for Semi Standard PRT s, RTD s, Thermistors, Thermocouples, Digital Readouts, Calibrators Radiation Thermometer and Liquid in Glass Thermometers. Calibration Method Fixed-Point and Comparison ISO/IEC compliant laboratory Fast turnaround time Certus offers a variety of standard calibration services. We can also customize a calibration to meet your requirements. The various services available from Certus include: Calibration Certificate for Comparison Temperature Calibrations - A detailed, multipage temperature certificate designed to meet all regulatory and audit requirements. Calibration Certificate for Fixed-Point Temperature Calibrations A detailed, multi-page temperature certificate that contains calibration data for comparisons to fixed point cell(s). Coefficient calculation for PRT s, Thermistor and Thermocouple. 8 Certus Metrology
10 TEMPERATURE RANGES Device Calibration Service Temperature SPRT, PRT, Precision Thermistor Fixed Point Calibration 0.01 C (Water Triple Point) C (Gallium Melt Point) Semi standard PRT, PRT Comparison to Reference PRT -35 C to 500 C Thermistor Comparison to Reference PRT -35 C to 250 C Thermocouple Comparison to Reference PRT or Type S Thermocouple -35 C to 1200 C Liquid-in-Glass Comparison to Reference PRT -35 C to 250 C Digital/Analogue Readouts and calibrator Resistance and mv -270 to 1768 C 9
11 humidity Humidity Calibrations from 10% to 95% Calibrations on a wide variety of humidity measurement devices including chart recorders, data loggers, hygrometers, thermo-hygrographs, sensors, transmitters and dew point hygrometers. Humidity 10 Certus Metrology
12 Certus offers standard and custom calibration services for a wide variety of humidity measuring devices including chart recorders/data loggers, sensors, thermo-hygrographs, transmitters and hygrometers. Certus also calibrates dew point hygrometers. Facility and EnvironMEnt The Humidity Calibration Laboratory is ISO/IEC compliant. Environmental conditions in the Laboratory are strictly monitored and controlled. EquIPMEnt Certus s Humidity Calibration Laboratory utilizes the two-pressure and twotemperature humidity generation process developed and proven by NIST. This design produces high precision humidity determinations ideal for instrument calibration and evaluation. Certus is proudly used our very own design of two temperature humidity generator for our humidity calibration. Laboratory capabilities are 10% to 95% Relative Humidity. Temperature range covered is 5 C to 70 C. ProCESSES Certus offers standard and custom humidity calibration procedures. Certus s traceable Humidity Calibration Certificate is a detailed, multi-page document designed to meet all regulatory and audit requirements. HuMIDITY CALIBrATIon ServICES InCLuDE: Calibration capabilities: 10% to 95% Relative Humidity at Dew Point range -30 C to 70 C 5 C to 70 C, Types of instruments serviced include: Chart recorders/data loggers, Thermohygroraphs, Sensors, Hygrometers, Transmitters & Dew point hygrometers ISO/IEC compliant laboratory Fast turnaround time 11
13 ElECTRICAl Electrical calibrations include DC Voltage, DC Current, AC Voltage, AC Current, Resistance, and Capacitance for calibrator and indicator. Electrical 12 Certus Metrology
14 All electrical calibrations are ISO/IEC compliant and include DC Voltage, DC Current, AC Voltage, AC Current, Resistance and Capacitance. Certus can calibrate most equipment that generate and measure for the above disciplines as well as most multimeters up to 5.5 digits. Ranges and uncertainties are found in the table below. Facility and EnvironMEnt Certus s Electrical Calibration Laboratory meets ISO guidelines. Environmental conditions in the laboratory are strictly monitored and controlled. EquIPMEnt Certus s Electrical Calibration Laboratory is outfitted with the latest state-oftheart equipment. Equipment includes multi function calibrators for electrical measurements calibration, 7.5 digits multimeter and Standard Resistors. ProCESSES Certus s can tailor a calibration for your Electrical devices if our standard service does not meet your needs. Certus Calibration Certificates for Electrical, Calibrations - A detailed multi-page ISO/IEC compliant calibration certificate traceable to International standards that contains the following data: as found readings, standards used, uncertainty of measurements, low/high limit of device being calibrated, and environmental conditions. RANGES AND UNCERTAINTIES Measurement Discipline Range Uncertainty DC Voltage V 25 ppm DC Current 0 30 A 50 ppm AC Voltage 0 V 1020 V Frequency range 10 Hz 500 khz 0.035% AC Current 0 A 30 A Frequency range 10 Hz 10 khz 0.06% Resistance DC 0 1 GΩ 40 ppm Capacitance 1 nf 10 μf 0.25% Frequency 1 Hz 10 MHz 20 ppm 13
15 PRessure Pressure Calibrations from -1 to 1000 bar with accuracy as low as 0.015% of reading Types of instruments serviced by Certus include gages, transmitters, transducers, calibrators, monitors and dead weight testers in gauge, vacuum and differential mode. Four standard levels of service, as well as custom services are available. Pressure 14 Certus Metrology
16 Certus s Pressure Calibration Laboratory utilizes the latest calibration equipment with reference standards traceable to the National and International. Facility, EnvironMEnt and EquIPMEnt Environmental conditions in the Laboratory are strictly monitored and controlled. All pressure calibration equipment used in Certus s Pressure Calibration Laboratories is state-of-the-art with the highest precision possible. Calibration equipment includes a two Dead weight tester as a primary pressure standard and sets of class F1 trims mass. ProCESSES Certus can offers standard and custom calibration services for a wide variety of pressure measuring devices. Certus s Calibration Certificate is a detailed, multi-page document designed to meet all regulatory and audit requirements. 15
17 PrESSure CALIBrATIon ServICES INCLUDE: National / International traceable calibrations Laboratory is ISO/IEC compliant. Capabilities: -1 bar to 1000 bar with accuracy as low as 0.015% of reading. Types of instruments serviced include: Gages, Transducers, Calibrators, Monitors, Pressure Controllers and Deadweight Testers in gauge, vacuum and differential mode. Detailed certificate provided with your pressure measurement devices Fast turnaround time Pressure Calibration Certificate A detailed, multi-page pressure certificate designed to meet all your all regulatory and audit requirements. Certificate includes as found and as left data for: Reference Pressure, Device Under Test and Accuracy found. In addition, deadweight tester certificates include cross floating calibration data for the deadweights. STANDARD PRESSURE CALIBRATION SERVICES Device Accuracy (% of Reading /FS) Deadweight Testers Level 1 Level 2 Level 3 < ±0.05% ±0.05% < ±0.1% ±0.1% ISO compliant National/International Traceable turnaround time** Less than 2 weeks 3 to 5 working days 3 to 5 working days 3 to 5 working days Expedited service available As found and as left data Adjustments** & Cleaning as required **Term and conditions apply 16 Certus Metrology
18 Certus Metrology PT. Certus Metrology Indonesia Komplek ITC Duta Mas Fatmawati Blok D2 no. 8 Jl. RS Fatmawati No. 39, Jakarta Selatan - Indonesia Tel: (62) , Fax: (62) designed by LeviveL (levivel@yahoo.com.sg)
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
oratory locations: 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Folgate House Folgate Road North Walsham Norfolk NR28 0AJ Contact: Mr P C A Marks Tel: +44 (0)1692 500555 Fax: +44 (0)1692
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL CENTER FOR ANIMAL HEALTH CALIBRATION LABORATORY 1920 Dayton Avenue Ames, Iowa 50010 Dr. Karl Hochstein 515-337-7739 CALIBRATION Valid To: June 30,
More informationCertificate of Accreditation to ISO/IEC 17025:2005
United States Department of Commerce National Institute of Standards and Technology Certificate of Accreditation to ISO/IEC 17025:2005 NVLAP LAB CODE: 200454-0 National Standards of Puerto Rico Rio Piedras,
More informationWithdrawn at December 31, Guideline DKD-R 6-2. Calibration of Measuring Devices for Vacuum DEUTSCHER KALIBRIERDIENST. Part 1.
DEUTSCHER KALIBRIERDIENST Guideline DKD-R 6-2 Part 1 Calibration of Measuring Devices for Vacuum Fundamentals Edition 03/2002 Page 1 of 6 Published by the Accreditation Body of the Deutscher Kalibrierdienst
More informationPROFICIENCY TESTING AND OTHER COMPARISON PROGRAMME REQUIREMENTS FOR CALIBRATION LABORATORIES
PROFICIENCY TESTING AND OTHER COMPARISON PROGRAMME REQUIREMENTS FOR CALIBRATION LABORATORIES Approved By: Chief Executive Officer: Ron Josias Executive - Accreditation: Mpho Phaloane Revised By: Accreditation
More informationNANDTB-F012 Rev 0 Audit Checklist
NANDTB-F012 Rev 0 Audit Checklist 1. Foreword Minimum Requirements for the Structured Training of Non-Destructive Testing Institutes This document is based upon CEN Technical Report 25108:2006, which is
More informationStrain Gage Measurements
Strain Gage Measurements Strain Gage Measurements Strain gauge measurements The electrical resistance strain gauge technique is based on measuring the variation in electrical resistance undergone by a
More informationCalibration Standards
T H I N F I L M Calibration Standards psi Standards Calibration Standards for the Semiconductor Industry S I M P L Y T H E B E S T PSI Standards Move into the future of calibration and ISO compliance with
More informationWe Provide Solutions for Electrical, Electronic,T&M,Process Instrumentation.We Are Authorised Regional Reprentavtive For
+91-8048764407 Optimum Electronic Instruments http://www.optimumelectronicinstruments.com/ We Provide Solutions for Electrical, Electronic,T&M,Process Instrumentation.We Are Authorised Regional Reprentavtive
More informationPCSIR Laboratories Complex, Peshawar-Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Chemical, & Calibration of PCSIR Laboratories Complex, Peshawar-Pakistan. The scope of accreditation is in accordance with the standard specifications outlined
More informationCETR Adhesion Testing on Glass/Al Surface for Corning Inc.
CETR Adhesion Testing on Glass/Al Surface for Corning Inc. I. Introduction 1.1 Objective The goal of the study was to differentiate stiction from various glass composites and surface treatments using the
More informationReach higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center.
GE Measurement & Control Reach higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center. www.geinspectionacademy.com Sharing knowledge. Shaping technology. At GE, we know the
More informationThe design and development of a force comparator standard machine to provide national traceability in force measurement to industry.
The design and development of a force comparator standard machine to provide national traceability in force measurement to industry. Speaker/ Author: S. Dlamini Co-author: C. Gouws National Metrology Institute
More informationNMISA A discussion on Force ILC's and methods to improve results. 13 October 2015 Speaker: S.T.S. Dlamini Author: C.H. Gouws
NMISA A discussion on Force ILC's and methods to improve results. 13 October 2015 Speaker: S.T.S. Dlamini Author: C.H. Gouws INDEX INTRODUCTION Background Why the need for this discussion ACCREDITATION
More informationFundamentals of Pulse Oximetry
Donald Gessling presents: Fundamentals of Pulse Oximetry Sponsored by: Fluke Biomedical Wednesday, September 14, 2016, 2:00pm ET PRESENTER: DONALD GESSLING, FLUKE BIOMEDICAL Donald Gessling, Senior Engineer
More informationKadi Sarva Vishvavidyalaya, Gandhinagar Bachelor of Engineering (Electrical Engineering Syllabus)
B.E Semester: VI th (EE) Subject Name & Subject code: Industrial Instrumentation (EE-605) Course Objective: To focus on the application of industrial instrumentation of various electrical parameters. To
More informationGlobal Inspection and Certifications (GIC) (Learn Today Lead Tomorrow)
Non Destructive Testing (NDT) Certification and Inspection Services NDT Personnel Certifications Program (Training & Examination Services) is one of the best and trustable Institution of quality inspection
More informationIDENTIFICATION OF THE PARAMETERS THAT INFLUENCE THE UNCERTAINTY SOURCES IN ORTOPHAEDIC IMPLANTS FATIGUE TESTS
XIX IMEKO World Congress Fundamental and Applied Metrology September 6 11, 2009, Lisbon, Portugal IDENTIFICATION OF THE PARAMETERS THAT INFLUENCE THE UNCERTAINTY SOURCES IN ORTOPHAEDIC IMPLANTS FATIGUE
More informationPage 1 of 7 Pages Weight ID Number 12345A Certificate Number SECTION 1: NAME AND ADDRESS OF CUSTOMER Date of Calibration 15-MAY-2018
P.O. Box 87 Thorofare, NJ 08086-0087 Phone: 856-686-1600 Fax: 856-686-1601 www.troemner.com e-mail: troemner@troemner.com Page 1 of 7 Pages SECTION 1: SECTION 2: APPROVED SIGNATORY Joseph Moran, Metrology
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15197 First edition 2003-05-01 In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus Systèmes d'essais
More informationForm for Regular Reporting of Regional Instrument Centres
Form for Regular Reporting of Regional Centres (please expand the cells as required to properly reflect your activities) Terms of Reference for Regional Centres (RICs) are available under: https://www.wmo.int/pages/prog/www/imop/instrument-reg-centres.html
More informationReliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs.
INDUSTRIAL SERVICES - NON-destructive testing Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
More informationNational Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 New Mexico Department of Agriculture Metrology Laboratory 3190 South Espina MSC 3170, P.O. Box 30005 Las Cruces, NM 88003-8005 Mr. Steve Sumner Phone: 575-646-1616
More informationSurvey on the Metrological Control for the Medical measurement Instruments
Survey on the Metrological for the Medical measurement Instruments The Working Group on Medical Measurements Singapore November 5-7, 2006 Issued : August 29, 2006 Responded : Six Member Economies, including,,,,
More informationISO and the Delivery of Competent NDT Services
ISO 17025 and the Delivery of Competent NDT Services Brett Hyland Delivery of Competent NDT Services OH&S legislation places responsibility on those appointing subcontractors/suppliers to ensure their
More informationDOELAP On-Site Assessment Requirements Checklist Page 1 of 24 Participant:
DOELAP On-Site Assessment Requirements Checklist Page 1 of 24 General Requirements Y, N, N/A Demonstration of Conformance G.1 Latest version of protocols or procedures G.2 Latest version of dosimeter specifications
More information-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION MARCH
-SQA-SCOTTISH QUALIFICATIONS AUTHORITY HIGHER NATIONAL UNIT SPECIFICATION GENERAL INFORMATION -Unit number- 3451068 -Unit title- -Superclass category- -Date of publication- (month and year) -Originating
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ARTEL LABORATORY 25 Bradley Drive Westbrook, ME 04092 Doreen Rumery Phone: 888 406 3463 CALIBRATION Valid To: October 31, 2019 Certificate
More informationph Technical Calibration Solutions solutions Technical Solutions (±0.01 ph) for Each Point of the ph Scale Easy to Use Single Dose Sachets
HI5000 Series Technical Calibration Technical (±0.01 ) for Each Point of the Scale To obtain precise and valid measurements, the meter and electrode must be calibrated at a minimum of two different points,
More informationManufacturing Facility Brownwood, TX
Manufacturing Facility Brownwood, TX Opening Our Pet Food Plant When we started CANIDAE our goal was to make the highest quality pet foods possible. Your continued support has allowed us to take the next
More informationOPENING UP A NEW WORLD
OPENING UP A NEW WORLD www.bernafon.com WELCOME TO THE WORLD OF BERNAFON We are a Swiss brand and company that people can rely on and trust. At Bernafon, we are passionate about developing stateof-the-art,
More informationElekta Infinity. Digital accelerator for advanced treatments. Redefining treatment precision, speed and control
Elekta Infinity Digital accelerator for advanced treatments Redefining treatment precision, speed and control Do you have the confidence to increase conformance and speed without compromising target coverage?
More informationCERTIFICATE OF ANALYSIS. tel: fax:
CERTIFICATE OF ANALYSIS 300 Technology Drive Christiansburg, VA 24073. USA inorganicventures.com tel: 800.669.6799. 540.585.3030 fax: 540.585.3012 info@inorganicventures.com 1.0 ACCREDITATION / REGISTRATION
More informationU.S. DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM (DOELAP) FOR PERSONNEL DOSIMETRY SYSTEMS
U.S. DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM (DOELAP) FOR PERSONNEL DOSIMETRY SYSTEMS F. M. Cummings ^ R. D. Carlson^ R. M. Loesch INTRODUCTION Accreditation of personnel dosimetry systems
More informationLAB5 EDITION 2 NOVEMBER 2012
2007 LAB5 EDITION 2 NOVEMBER 2012 Reporting Calibration Results JH CONTENTS SECTION PAGE 1 Introduction 2 2 UKAS calibration accreditation symbol 3 3 General guidance for the presentation of calibration
More informationCalibration Solutions. be certain.
Calibration Solutions be certain. MTS CALIBRATION SERVICES Optimize THE VALIDITY OF YOUR TEST DATA AND THE EFFICIENCY OF YOUR TEST LAB. OUR ACCREDITED ONSITE CALIBRATION AND METROLOGY LABORATORY; As well
More informationMulti Analyte Custom Grade Solution
1.0 ACCREDITATION / REGISTRATION INORGANIC VENTURES is accredited to ISO Guide 34, "General Requirements for the Competence of Reference Material Producers" and ISO/IEC 17025, "General Requirements for
More informationThe techniques of continually improving the quality system for ISO accredited laboratories
The techniques of continually improving the quality system for ISO 17025 accredited laboratories Mpatuwa Agnes Mokhosi: Masters in Quality Department of Operations and Quality Management Dr Bloodless Dzwairo
More informationProficiency Testings (PTs) and Interlaboratory Comparisons (ILCs) for the Department of Calibration Laboratories
Title Reference Proficiency Testings (PTs) and Interlaboratory Comparisons (ILCs) for the Department of Calibration Laboratories RT-36 Revision 00 Date Preparation Approval Authorization Application date
More informationAccreditation of Dosimetry Services
Accreditation of Dosimetry Services J. Van Cauteren, E. De Geest, M. Bricoult AV-Controlatom Content History Regulatory requirements Discussion of reference documents/standards Practical implementation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 UNIVERSITY OF WISCONSIN RADIATION CALIBRATION LABORATORY Room B1002, WIMR 1111 Highland Avenue Madison, WI 53705-2275 Larry A. DeWerd,
More informationWilmad Your One Stop NMR Shop
Wilmad Your One Stop NMR Shop 100% Inspected Precision Tools Because Nothing is More Important Than Your Results Prepare to Discover Wilmad 5mm OD Thin Walled Economy NMR Tubes Economy Designed for routine
More informationUltrasound & Laser Therapy
Ultrasound & Laser Therapy THE BTL-4000 SERIES This new and advanced series of physiotherapy products offers devices for ultrasound therapy, electrotherapy, laser as well as an extended line of combination
More informationComparability and quality of experimental data under different quality systems. S. Caroli Istituto Superiore di Sanità Rome
Comparability and quality of experimental data under different quality systems S. Caroli Istituto Superiore di Sanità Rome Programme of this presentation Part I. Background information Part II. Key aspects
More informationMEGGITT SENSING SYSTEMS Endevco short course guide
MEGGITT SENSING SYSTEMS Endevco short course guide Shock and vibration measurement technology I Shock and vibration measurement technology II Instructors: Jon Wilson, Jon S. Wilson Consulting Michael Phan,
More informationReducing the risk of allergen contamination in the factory
Reducing the risk of allergen contamination in the factory Barbara Hirst RSSL Sponsored by Reactions To Food ADVERSE REACTIONS TO FOOD GENERIC May occur in anyone who consumes sufficient quantity of the
More informationIAS Presentation at Kuwait Labs nd Kuwait Conference for Laboratory Quality and Accreditation Empowering Laboratory Personnel
IAS Presentation at Kuwait Labs 2017 2nd Kuwait Conference for Laboratory Quality and Accreditation Empowering Laboratory Personnel September 26, 2017 Kuwait City Lawrence J. O Connor, P.E., L.S., F. NSPE
More informationCANADA SENSORS TECHNOLOGY INC.
CANADA SENSORS TECHNOLOGY INC. Manufacturer of Advanced Technology Pressure & Level Transmitters PRESSURE TRANSMITTER PROCESS 1 HART Enabled Intrinsically Safe Model Canada Sensors intelligent transmitters
More informationPolicy for Participation in Proficiency Testing Activities
National Accreditation Board for Testing and Calibration Laboratories (NABL) NABL 163 Policy for Participation in Proficiency Testing Activities ISSUE NO. : 08 ISSUE DATE : 07-Mar-2019 AMENDMENT NO. :
More informationSterilization of health care products Radiation. Part 3: Guidance on dosimetric aspects of development, validation and routine control
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11137-3 Second edition 2017-06 Sterilization of health care products Radiation Part 3: Guidance on dosimetric aspects of development, validation
More informationSolutions at GE Inspection Technologies
Solutions at GE Inspection Technologies Business Overview Paul A. Meyer Our Company A global leader in technology-driven inspection solutions that deliver productivity, quality, and safety to our customers
More informationSignet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems Features Certificate of calibration supplied with all sensors. Universal Mount Custom cell constant programmed into the electronics.
More informationQuality Management System Certification. Understanding Quality Management System (QMS) certification
Quality Management System Certification Understanding Quality Management System (QMS) certification The medical device manufacturing sector is one of the most regulated sectors in which significant quality
More informationASCO Power Control Systems Overview
ASCO Power Control Systems Overview POWER CONTROL CHALLENGES Today more than ever, continuous electrical power is essential for providing mission-critical services. Whether it s a hospital providing critical
More informationSignet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor
Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor Features Test certificate supplied with all sensors Universal Mount Custom cell constant programmed into the
More informationAdvanced in vitro exposure systems
Advanced in vitro exposure systems VITROCELL VC 1/7 SMOKING MACHINE Features for e-cigarettes VITROCELL VC 1/7 SMOKING MACHINE Linear smoking machine with high tech features square puff profiles higher
More informationLet s share our talents
Let s share our talents 2 The global solution in dental implantology As the first dental implant provider to develop a comprehensive offer, Anthogyr designs, manufactures and distributes a complete range
More informationGlobal Harmonization Task Force SG3 Comments and Recommendations ISO/DIS 9001: 2000 and ISO/DIS 9000: 2000 And Revision of ISO and 13488
Page 1 of 6 Global Harmonization Task Force SG3 ISO/DIS 9001: 2000 and ISO/DIS 9000: 2000 And Revision of ISO 13485 and 13488 GENERAL COMMENTS The Global Harmonization Task Force Study Group Three (GHTF
More informationNJ CBCT Regulation FAQ & Assistance
NJ CBCT Regulation FAQ & Assistance According to the State of New Jersey Department of Environmental Protection, all dental CBCT facilities must implement the NJDA alternative QA program by June 30 th,
More information4-20 ma Pressure Transducer
4-20 ma Pressure Transducer 56410099 Copyright 2017 Durham Geo Slope Indicator All Rights Reserved. This equipment should be installed, maintained, and operated by technically qualified personnel. Any
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONBRACO CALIBRATION SERVICES 1418 S. Pearl Street Pageland, SC 29728 Scott McKay Phone: 843 672 1616 CALIBRATION Valid To: March 31,
More informationThe use of QCMD proficiency testing panels in clinical virology.
The use of QCMD proficiency testing panels in clinical virology. Prof.dr. Bert Niesters Department of Medical Microbiology Division of Clinical Virology UMC Groningen Disease Disease Management Viral Load
More informationADVANCE ULTRASONIC INSPECTION
ADVANCE ULTRASONIC INSPECTION INTRODUCING PHASED ARRAY TESTING Who we are Conventional and Advanced NDT and Inspection Services Oil and Gas, Refinery, Petrochemical, Heavy Industry, Mining Over 400 personnel
More informationHALAL FOOD AND SAFETY COMPLIANCE AGROASIA 2011 HALAL INDUSTRY RESEARCH CENTRE
HALAL FOOD AND SAFETY COMPLIANCE AGROASIA 2011 July 2010 Page 1 Revolutionizing Assistance in the disposal Industry of in Prime a Shariah Liquid Compliant Emulsion way Industries! Halal Industry Research
More informationWelcome to presentation By Sanjay Punjabi Lead Auditor for ISO 9001, ISO 14001, OHSAS & BS 7799
Welcome to presentation By Sanjay Punjabi Lead Auditor for ISO 9001, ISO 14001, OHSAS 18001 & BS 7799 NETPECKERS CONSULTING (P) LTD. An ISO 9001:2000 compliant organization On Advantages, importance &
More informationLance Listening to End-Users Clinical Use Design Validation Study
Lancing Devices Lance Listening to End-Users Clinical Use Design Validation Study Abstract +clinical + use study (CUS) conducted to validate new babylance design was meeting end-user expectations +prefaced
More informationThe Do s and Don ts of Pressure Transducers
The Do s and Don ts of Pressure Transducers ABSTRACT When specifying a pressure transducer for a process measurement, a number of items have to be considered. Some of the more important ones are discussed
More informationUnderstanding the true meaning of precision
Understanding the true meaning of precision A Global Reputation When guaranteed precision is your ultimate goal, choosing the right partner is essential. IBS Precision Engineering works with renowned
More informationDarwin Marine Supply Base HSEQ Quality Management Plan
Darwin Marine Supply Base HSEQ Quality Management Plan REVISION SUMMARY Revision Date Comment Authorised 0 29.9.13 Initial input JC 1 12.1.15 General Review JC 2 3 4 5 6 7 8 9 Revision Log Revision No
More information1ª Jornada de Análisis de Riesgos en RT. 10 de Dic 2014 José Luis Roldán
Risk in Dosimetry. Industry Stand point 1ª Jornada de Análisis de Riesgos en RT. 10 de Dic 2014 José Luis Roldán Agenda IBA. IBA Dosimetry Risks in Dosimetry Product development Product manufacturing Product
More informationINTERNATIONAL OLIVE COUNCIL
INTERNATIONAL OLIVE COUNCIL COI/T.28/Doc. No 1/Rev. 2 Noviembre 2017 ENGLISH Original: ENGLISH Distr.: RESTRICTED Príncipe de Vergara, 154 28002 Madrid España Telef. : +34 915 903 638 Fax : +34 915 631
More informationNMIJ measurement service on ultrasonic field parameters available to demonstrate performance and safety of ultrasonic medical equipment
NMIJ measurement service on ultrasonic field parameters available to demonstrate performance and safety of ultrasonic medical equipment Masahiro Yoshioka National Metrology Institute of Japan (NMIJ) National
More informationPressure. Power Monitoring. Humidity. Calibration. Weighing System. Building Automation. Markets Products Resources Custom Solutions Blog Order Online
e: Setra_Logo_PM Markets Products Resources Custom Solutions Blog Order Online Pressure Absolute Barometric Compound Differential Gauge Room Pressure Monitoring Submersible Vacuum Power Monitoring Current
More informationProfessional body composition analysis: BODYSTAT I500. Touch Screen THE SCIENCE BEHIND CLINICAL BODY ASSESSMENT.
Professional body composition analysis: BODYSTAT I500 Touch Screen THE SCIENCE BEHIND CLINICAL BODY ASSESSMENT www.bodystat.com ADVANCED BODY COMPOSITION THE HEALTH, FITNESS & LEISURE TAKE YOUR BUSINESS
More informationIAEA activities in Medical Physics
IAEA activities in Medical Physics Giorgia Loreti Training Officer (Medical Physics) G.Loreti@iaea.org IAEA - International Atomic Energy Agency Department of Nuclear Sciences and Applications Division
More informationThe Next Generation of Time Lapse Systems. Miri TL. time lapse incubator for IVF. Designed in Denmark. Made in the E.U.
The Next Generation of Time Lapse Systems. Miri TL time lapse incubator for IVF Designed in Denmark Made in the E.U. Medical Devices 1023 2 Miri TL An affordable time lapse incubation system for IVF The
More informationImplementing of Good Laboratory Practice (GLP) in Food Analysis Laboratories of Baghdad University
ISSN (Online): 2319-764 Index Copernicus Value (215): 78.96 Impact Factor (215): 6.391 Implementing of Good Laboratory Practice (GLP) in Food Analysis Laboratories of Baghdad University Mahmud Abdullah
More informationDIAGNOSTIC ACCREDITATION PROGRAM. Spirometry Quality Control Plan
DIAGNOSTIC ACCREDITATION PROGRAM Spirometry Quality Control Plan Table of Contents Introduction...1 Spirometry Definitions and Requirements...2 Spirometry Requirements... 2...4 Daily Quality Control (see
More informationCompetitor Series. Body Composition Analyzers
Competitor Series Body Composition Analyzers Right Arm Bringing it All Together. Giving You the Advantage. Right Leg Trunk Left Arm Rice Lake s Competitor Series body composition analyzers (BCA) are designed
More informationIEC 87: Ultrasonics Overview update July 2002
- 1 - CCAUV/02-07 IEC 87: Ultrasonics Overview update July 2002 Roy C Preston Secretary IEC TC 87: Ultrasonics British Electrotechnical Committee, British Standards Institution, 389 Chiswick High Road,
More informationProficiency testing performance of Turkish laboratories on determination of relative composition of fatty acids in sunflower oil
ORIGINAL ARTICLE J. Chem. Metrol. 11:2 (2017) 40-45 Proficiency testing performance of Turkish laboratories on determination of relative composition of fatty acids in sunflower oil Hasibe Yilmaz 1*, Simay
More informationAer ODE B3-20. Database System for GEX B3 Dosimetry. Aérial. Optical Dosimetry Equipment. (gamma and/or electron beam versions)
B3-20 Database System for GEX B3 Dosimetry (gamma and/or electron beam versions) and GEX combine to provide a Genesys 20 version of the flexible 21 CFR Part 11 certified database dosimetry system for use
More information2. Develop teams of four students (there are seven unique roles in ABIG Company).
ROLE-PLAY EXERCISE QRS AsthmaCare Products, Inc. PROCESS 1. Make copies of the role-play exercise pages (one copy of background page for each student in the class; one set of four roles for every four
More informationLakshy Management Consultant Pvt. Ltd.
What is ISO 13485:2003? You can t buy trust. BUILD IT through ISO 13485. Demonstrate your ability to supply medical devices through Quality Management System for Medical Devices - ISO 13485 ISO 13485 is
More informationบร การสอบเท ยบ และทดสอบเคร องม อว ด
NSC-TISI-TIS705 และทดสอบเคร องม อว ด http://www.tpa.or.th/ce/ สมาคมส งเสร มเทคโนโลย (ไทย-ญ ป น) Accredited Calibration Laboratory ISO/IEC 705 NSC-TISI-TIS705 NSC-TISI-TIS705 สมาคมส งเสร งเสร มมเทคโนโลย
More informationHealth Care Technology. Press Kit. Contact: Ms. Lucijana Manovic Sales/Marketing. Tel.: +43 (0)
Press Kit Contact: Ms. Lucijana Manovic Sales/Marketing Tel.: +43 (0) 316 42 65 00-10 E-Mail: lucijana.manovic@mides.com Index 1. The Company... 3 2. Facts and Figures... 4 3. Products and Services...
More informationMetrology in pharmaceutical production
Metrology in pharmaceutical production 22/05/2013 1 Metrology in pharmaceutical production Metrologidag 2013 Lorenzo Carli, Ph.D. lzcl@novonordisk.com Contributions from: Jan Lasson Andreasen (R&D) Kirsten
More informationCurriculum Vitae Daniel C. Arnold, MA, LPC, NCC
Curriculum Vitae Daniel C. Arnold, MA, LPC, NCC 1910 University Drive 208-426-4105 Boise, ID. 83725 danarnold@boisestate.edu PROFESSIONAL PROFILE/ACHIEVEMENTS Serve as Substance Abuse Disorder and Co-occurring
More informationEVALUATION QUESTIONNAIRE
INTERNATIONAL OLIVE COUNCIL Príncipe de Vergara, 154 28002 Madrid España Telef.: +34 915 903 638 Fax: +34 915 631 263 - e-mail: iooc@internationaloliveoil.org - http://www.internationaloliveoil.org/ Physico
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MASTER GAGE & TOOL CO. 112 Maplewood Street Danville, VA 24540 Sean Cobb Phone: 434 836 4243 CALIBRATION Valid To: June 30, 2018 Certificate
More informationLeader in custom manufacturing. for the pharmaceutical and nutraceutical industries.
Leader in custom manufacturing for the pharmaceutical and nutraceutical industries. Since its inception in April 1994, Viva Pharmaceutical Inc. has built a reputation as a leading manufacturer committed
More informationPerformance of phased array and conventional ultrasonic probes on the new ISO reference block
Performance of phased array and conventional ultrasonic probes on the new ISO 19675 reference block C. Udell, D. Chai 1 and F. Gattiker Proceq S.A., Ringstrasse 2, Schwerzenbach, Switzerland. More info
More informationANALYTICAL SCALE AGILENT LCMS SYSTEMS OPERATIONAL QUALIFICATION
ANALYTICAL SCALE AGILENT LCMS SYSTEMS OPERATIONAL QUALIFICATION Overview This document describes the test program for qualifying Agilent LCMS systems. The following tables list all MS source-specific OQ
More informationGEX Technical Information Report
Transfer Standard Alanine Study September 2017 Background Ionizing radiation is used to produce various desired effects in products. Examples of applications include; the sterilization of medical products,
More informationPerformance evaluation of force transducers
Indian Journal of Pure & Applied Physics Vol. 50, February 2012, pp. 86-90 Performance evaluation of force transducers Harish Kumar 1,2 * & Chitra Sharma 3 1 CSIR-National Physical Laboratory, New Delhi
More informationDescription. Modell-Nr Airless ProfessionalLine. According to ISO 1167 ASTM D 1598 ASTM D Simple and safe operation. Reliable test results
Modell-Nr. 1720 Airless ProfessionalLine According to ISO 1167 ASTM D 1598 ASTM D 1599 Description The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes.
More informationA New Revolution of Relief
Nutraceuticals, Inc. A New Revolution of Relief PRESENTED January 2019 1 The world s highest quality for non-psychoactive phytocannabinoid medicine with proprietary techniques to increase overall efficacy
More informationSonography Program Application and Information Packet. Lackawanna College Sonography Programs Technical Standards
Sonography Program Application and Information Packet The ultrasound profession is subdivided into nine specialties. The specialties offered at Lackawanna College are General Diagnostic Medical Sonography,
More informationQualification Guidance. Level 2 Award in Instructing Kettlebells. Qualification Accreditation Number: 600/4089/0.
Qualification Guidance Level 2 Award in Instructing Kettlebells Qualification Accreditation Number: 600/4089/0 Version AIQ004526 Active IQ wishes to emphasise that whilst every effort is made to ensure
More informationProficiency Testing Policy
Page 1 of 7 Reviewed by: Getnet Tsigemelak Approved by: Araya Fesseha Position: Deputy Director General Position: Director General Signature: Signature: Contents Page 1 Purpose...2 2 scope...2 3 References...2
More information