SMOKELESS TOBACCO SPRING LOAD TRAYS

Transcription

1 INTRODUCTION: CAREFULLY READ THE CONTENTS OF THESE INSTRUCTIONS, AS THEY INDICATE THE CORRECT STEP BY STEP PROCEDURE TO ASSEMBLE THE PRODUCT. THE CARTON CONTENTS PAGE(S) WILL IDENTIFY THE ASSEMBLY PARTS. BEFORE PROCEEDING WITH THE ASSEMBLY PROCESS, MATCH THE CARTON CONTENTS TO THE STATED CONTENTS TO ENSURE THERE ARE NO MISSING PARTS. IN THE EVENT OF ASSEMBLY PROBLEMS OR MISSING PARTS, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT. PHONE: WEBSITE: CAUTION: ASSEMBLED TOBACCO FIXTURES MAY BE VERY HEAVY. DO NOT ATTEMPT TO LIFT OR MOVE WITHOUT ASSISTANCE. THE FOLLOWING ITEMS ARE COVERED BY THESE INSTRUCTIONS; , 1 PACK BLACK , 12 PACK BLACK , 9 PACK BLACK , 1 PACK SILVER , 12 PACK SILVER , 9 PACK SILVER THE MANUFACTURER OF THIS DISPLAY ASSUMES NO LIABILITY FOR INJURY CAUSED BY IMPROPER ASSEMBLY/INSTALLATION OF THIS DISPLAY NUMBER OF PEOPLE REQUIRED TO ASSEMBLE UNIT: (1) ASSEMBLY TOOLS REQUIRED: NONE PAGE 1 OF 7

2 CARTON CONTENTS SMOKELESS TOBACCO SPRING LOAD TRAY, 1 PACK 1A (STORED POSITION) CARTON DIMENSIONS: 13" X 11-3/4" X 4-1/2" CARTON WEIGHT: 2 LBS. UNIT WEIGHT: 1-1/2 LBS., 12 PACK PADDLES REMAIN STATIONARY WHEN THE TRAY IS EXTENDED TO FACILITATE RESTOCKING OF PRODUCT ANGLED TRACK 2 CARTON DIMENSIONS: 19-1/2" X 13-1/4" X 23" CARTON WEIGHT: 20 LBS. UNIT WEIGHT: 18 LBS., 9 PACK 1A SMOKELESS TOBACCO SPRING LOAD TRAY 9 CARTON DIMENSIONS: 28-3/4" X 13-1/2" X 12" CARTON WEIGHT: 15 LBS. UNIT WEIGHT: 13-1/2 LBS. 1A (EXTENDED POSITION) SPRING LOAD TRAY IMPORTANT - THE SMOKELESS TOBACCO SPRING LOAD TRAY INCLUDES A SPECIAL ANGLED TRACK PREASSEMBLED TO THE SPRING LOAD TRAY. DO NOT DISASSEMBLE THE SMOKELESS TOBACCO SPRING LOAD TRAY AND TRACK. PAGE 2 OF 7

3 INSTALLATION NOTE - THE SMOKELESS TOBACCO SPRING LOAD TRAY IS DESIGNED TO FIT INTO THE SAME SPACE AS A STANDARD 4 WIDE OR 5 WIDE SPRING LOAD TRAY. STEP 1 - DETERMINE WHERE THE SMOKELESS TOBACCO SPRING LOAD TRAYS ARE TO BE INSTALLED, AND WHICH EXISTING SPRING LOAD TRAYS WILL NEED TO BE REMOVED. STANDARD TRACK VIEW 1 TRACK SLOTS BOTTOM SIDE OF STANDARD 5 WIDE SPRING LOAD TRAY STEP 2 - PUSH THE FIRST SPRING LOAD TRAY SLIGHTLY TO THE UNTIL THE "T's" ON THE BOTTOM OF THE TRAY ALIGN WITH THE SLOTS IN THE TRACK. (VIEW 1 AND VIEW 2) TRAY "T's" VIEW 2 STEP 3 - LIFT THE SPRING LOAD TRAY UPWARD UNTIL IT IS NO LONGER ATTACHED TO THE TRACK, AND COMPLETELY REMOVE IT FROM THE TOBACCO FIXTURE SHELF. RECYLE/DISCARD AS NEEDED. (VIEW 3) EXISTING SPRING LOAD TRAYS SHELVES STEP 4 - REPEAT STEPS 1 THROUGH 3 AS NEEDED. NOTE - INSTALLATION IS THE SAME FOR ALL COLORS OF SMOKELESS TOBACCO SPRING LOAD TRAYS. VIEW 3 PAGE 3 OF 7

4 SHELVES BOTTOM SIDE OF TRACK VIEW 4 SQUEEZE TOGETHER VIEW 6 VIEW 5 STEP 5 - REACH UNDERNEATH THE FIRST TOBACCO FIXTURE SHELF AND LOCATE THE 4 SETS OF ATTACHING THE TRACK. (VIEW 4 AND VIEW 5) STEP 6 - SQUEEZE THE 2 SETS OF ON THE OF THE TRACK AND GENTLY PUSH UPWARD UNTIL THEY ARE NO LONGER ATTACHED TO THE TOBACCO FIXTURE SHELF. REPEAT FOR THE 2 SETS OF ON THE OF THE TRACK. (VIEW 4 AND VIEW 5) STEP 7 - REMOVE THE TRACK FROM THE TOBACCO FIXTURE SHELF. RECYCLE/DISCARD AS NEEDED. (VIEW 6) STEP 8 - REPEAT STEPS 5 THROUGH 7 AS NEEDED. PAGE 4 OF 7

5 SHELF SLOTS BOTTOM SIDE OF SMOKELESS TOBACCO SPRING LOAD TRAY VIEW 7 SHELF SLOTS VIEW 8 SHELVES IMPORTANT - WHEN INSTALLING A SMOKELESS TOBACCO SPRING LOAD TRAY ON A TOBACCO FIXTURE SHELF MAKE SURE THE SHELF IS PROPERLY SUPPORTED WHEN SNAPPING IT INTO PLACE. STEP 9 - LOCATE THE 3 SLOTS ON THE TOBACCO FIXTURE SHELF WHERE THE FIRST SMOKELESS TOBACCO SPRING LOAD TRAY WILL BE INSTALLED. POSITION THE AND OF THE SMOKELESS TOBACCO SPRING LOAD TRAY TRACK OVER THE APPROPRIATE TOBACCO FIXTURE SHELF SLOTS, AND LOWER IT INTO PLACE. (VIEW 7 AND VIEW 8) STEP 10 - REACHING THROUGH THE OPENINGS IN THE SMOKELESS TOBACCO SPRING LOAD TRAY, PUSH DOWN ON THE 2 SETS OF UNTIL THEY SNAP INTO PLACE ON THE TOBACCO FIXTURE SHELF. (VIEW 9) DOWN ON TOP SIDE OF SMOKELESS TOBACCO SPRING LOAD TRAY VIEW 9 DOWN ON PAGE 5 OF 7

6 TOP SIDE OF SMOKELESS TOBACCO SPRING LOAD TRAY VIEW 10 SHELVES DOWN ON DOWN ON STEP 11 - WITH THE SECURE, EXTEND THE SMOKELESS TOBACCO SPRING LOAD TRAY UNTIL THE ARE ACCESSIBLE. (VIEW 10) STEP 12 - PUSH DOWN ON THE 2 SETS OF OF THE SMOKELESS TOBACCO SPRING LOAD TRAY UNTIL THEY SNAP INTO PLACE ON THE TOBACCO FIXTURE SHELF. (VIEW 11) IMPORTANT - MAKE SURE THAT THE SMOKELESS TOBACCO SPRING LOAD TRAY IS PROPERLY SECURED TO THE TOBACCO FIXTURE SHELF WITH ALL 4. VIEW 11 PAGE 6 OF 7

7 STEP 13 - REPEAT STEPS 9 THROUGH 12 AS NEEDED. (VIEW 12) STEP 14 - ADJUST THE LOCATION OF THE SMOKELESS TOBACCO SPRING LOAD TRAY FROM SIDE TO SIDE AS NEEDED. (VIEW 12) VIEW 12 SHELVES STEP 15 - INSTALLATION IS COMPLETE. RECYCLE/DISCARD THE PACKING MATERIALS AND CLEAN UP THE AREA. PAGE 7 OF 7