Safety Data Sheet according to Regulation (EC) No 1907/2006

Transcription

1 Safety Data Sheet according to Regulation (EC) No 1907/2006 Loctite 3038 part B Page 1 of 14 SDS No. : Revision: printing date: Replaces version from: SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Loctite 3038 part B Contains: Tetrahydrofurfuryl 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use: Acrylic Adhesive 1.3. Details of the supplier of the safety data sheet Henkel AG & Co. KGaA Henkelstr Düsseldorf Germany Phone: +49 (211) Emergency telephone number Classification of the substance or mixture SECTION 2: Hazards identification Classification (CLP): Skin irritation Category 2 H315 Causes skin irritation. Serious eye damage Category 1 H318 Causes serious eye damage. Skin sensitizer Category 1 H317 May cause an allergic skin reaction. Toxic to reproduction Category 1B H360 May damage fertility or the unborn child. Specific target organ toxicity - single exposure Category 3 H335 May cause respiratory irritation. Target organ: respiratory tract irritation Chronic hazards to the aquatic environment Category 3 H412 Harmful to aquatic life with long lasting effects.

2 Loctite 3038 part B Page 2 of 14 Classification (DPD): Toxic for reproduction - category 1. R60 May impair fertility. R61 May cause harm to the unborn child. Sensitizing R43 May cause sensitisation by skin contact. Xi - Irritant R36/37/38 Irritating to eyes, respiratory system and skin Label elements Label elements (CLP): Hazard pictogram: Signal word: Hazard statement: Supplemental information Danger H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H360 May damage fertility or the unborn child. H412 Harmful to aquatic life with long lasting effects. Restricted to professional users. Precautionary statement: Prevention Precautionary statement: Response P201 Obtain special instructions before use. P261 Avoid breathing vapours. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/attention. P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

3 Loctite 3038 part B Page 3 of 14 Label elements (DPD): T - Toxic Risk phrases: R60 May impair fertility. R61 May cause harm to the unborn child. R36/37/38 Irritating to eyes, respiratory system and skin. R43 May cause sensitisation by skin contact. Safety phrases: S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S35 This material and its container must be disposed of in a safe way. S36/37 Wear suitable protective clothing and gloves. S53 Avoid obtain special instructions before use. S61 Avoid release to the environment. Refer to special instructions/safety data sheets. Additional labeling: Restricted to professional users. Contains: Tetrahydrofurfuryl,, Contains. May produce an allergic reaction Other hazards None if used properly. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria Mixtures SECTION 3: Composition/information on ingredients

4 Loctite 3038 part B Page 4 of 14 Declaration of the ingredients according to CLP (EC) No 1272/2008: Tetrahydrofurfuryl EC Number REACH-Reg No. content Classification % Skin Irrit. 2; Dermal H315 Eye Irrit. 2 H319 STOT SE 3; Inhalation H335 Repr. 1B H360 Aquatic Chronic 3 H < 10 % STOT SE 3 H335 Skin Irrit. 2 H315 Eye Irrit. 2 H319 Aquatic Chronic 3 H < 10 % Skin Sens. 1; Dermal H317 Eye Dam. 1 H < 3 % Skin Sens. 1B H ,1- < 1 % Skin Irrit. 2 H315 Skin Sens. 1 H317 Eye Irrit. 2 H319 For full text of the H - statements and other abbreviations see section 16 "Other information". Substances without classification may have community workplace exposure limits available. Declaration of ingredients according to DPD (EC) No 1999/45: Tetrahydrofurfuryl 2,2'-Ethylenedioxydiethyl di EC Number REACH-Reg No. content Classification % Xi - Irritant; R36/37/38 T - Toxic; R60, R < 10 % Xi - Irritant; R36/37/ < 10 % Xi - Irritant; R41, R < 3 % Xi - Irritant; R ,1 - < 1 % Xi - Irritant; R36/38 R43 For full text of the R-Phrases indicated by codes see section 16 'Other Information'. Substances without classification may have community workplace exposure limits available Description of first aid measures SECTION 4: First aid measures Inhalation: Move to fresh air. If symptoms persist, seek medical advice. Skin contact: Rinse with running water and soap. Obtain medical attention if irritation persists. Eye contact: Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.

5 Loctite 3038 part B Page 5 of 14 Ingestion: Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor Most important symptoms and effects, both acute and delayed SKIN: Rash, Urticaria. SKIN: Redness, inflammation. RESPIRATORY: Irritation, coughing, shortness of breath, chest tightness. After eye contact: Corrosive, may cause permanent damage to eyes (impairment of vision) Indication of any immediate medical attention and special treatment needed See section: Description of first aid measures 5.1. Extinguishing media Suitable extinguishing media: Carbon dioxide, foam, powder SECTION 5: Firefighting measures Extinguishing media which must not be used for safety reasons: None known 5.2. Special hazards arising from the substance or mixture Do not expose to direct heat. Oxides of carbon, oxides of nitrogen, irritating organic vapors Advice for firefighters Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Avoid skin and eye contact. Ensure adequate ventilation Environmental precautions Do not let product enter drains Methods and material for containment and cleaning up For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal. Dispose of contaminated material as waste according to Section Reference to other sections See advice in section 8 SECTION 7: Handling and storage 7.1. Precautions for safe handling Use only in well-ventilated areas. Prolonged or repeated skin contact should be avoided to minimise any risk of sensitisation. Hygiene measures: Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed Conditions for safe storage, including any incompatibilities Store in a cool, well-ventilated place.

6 Loctite 3038 part B Page 6 of Specific end use(s) Acrylic Adhesive SECTION 8: controls/personal protection 8.1. Control parameters Occupational Limits Valid for South Africa Ingredient [Regulated substance] ppm mg/m 3 Value type Short term exposure limit category / Remarks Silicon dioxide 3 Time Weighted Average (TWA): [SILICA, AMORPHOUS, RESPIRABLE DUST] Silicon dioxide [SILICA, AMORPHOUS, TOTAL INHALABLE DUST] Ethene, homopolymer [DUSTS, RESPIRABLE DUST] Ethene, homopolymer [DUSTS, TOTAL DUST] 6 Time Weighted Average (TWA): 5 Time Weighted Average (TWA): 10 Time Weighted Average (TWA): Regulatory list ZA REL ZA REL ZA REL ZA REL Predicted No-Effect Concentration (PNEC): Name on list Environmental Compartment period Value mg/l ppm mg/kg others aqua 0,164 mg/l (freshwater) aqua (marine 0,0164 mg/l water) sewage 10 mg/l treatment plant (STP) aqua 0,164 mg/l (intermittent releases) sediment 1,85 mg/kg (freshwater) sediment 0,185 (marine water) mg/kg soil 0,274 mg/kg aqua 0,482 mg/l (freshwater) aqua (marine 0,482 mg/l water) sewage 10 mg/l treatment plant (STP) aqua 1 mg/l (intermittent releases) sediment 3,79 mg/kg (freshwater) sediment 3,79 mg/kg (marine water) soil 0,476 mg/kg Remarks

7 Loctite 3038 part B Page 7 of 14 Derived No-Effect Level (DNEL): Name on list Application Area Route of Health Effect worker dermal Long term Workers inhalation Long term Workers dermal Long term General inhalation Long term population General population General population dermal oral Long term Long term Workers dermal Long term Workers Inhalation Long term General population General population General population dermal Inhalation oral Long term Long term Long term Time Value 5 mg/kg bw/day 48,5 mg/m3 13,9 mg/kg bw/day 14,5 mg/m3 8,33 mg/kg bw/day 8,33 mg/kg bw/day 1,3 mg/kg bw/day 4,9 mg/m3 0,83 mg/kg bw/day 2,9 mg/m3 0,83 mg/kg bw/day Remarks Biological Indices: None 8.2. controls: Engineering controls: Ensure good ventilation/extraction. Respiratory protection: Use only in well-ventilated areas. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387) Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.

8 Loctite 3038 part B Page 8 of 14 Eye protection: Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166. Skin protection: Wear suitable protective clothing. Protective clothing should conform to EN for liquid splashes or to EN for dusts. Advices to personal protection equipment: The information provided on personal protective equipment is for guidance purposes only. A full risk assessment should be conducted prior to using this product to determine the appropriate personal protective equipment to suit local conditions. Personal protective equipment should conform to the relevant EN standard. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Appearance liquid Odor Odour threshold mild ph ph Initial boiling point Flash point Decomposition temperature Vapour pressure Density () Bulk density Viscosity Viscosity (kinematic) Explosive properties Solubility (qualitative) (Solvent: Water) Solidification temperature Melting point Flammability Auto-ignition temperature Explosive limits Partition coefficient: n-octanol/water Evaporation rate Vapor density Oxidising properties Not applicable Not applicable > 150 C (> 302 F) > 100 C (> 212 F) < 3 mm hg 1,02 g/cm3 Insoluble Not available. Heavier than air 9.2. Other information SECTION 10: Stability and reactivity Reactivity Strong oxidizing agents. Reducing agents. Peroxides. Heavy metals Chemical stability Stable under recommended storage conditions Possibility of hazardous reactions See section reactivity

9 Loctite 3038 part B Page 9 of Conditions to avoid No decomposition if used according to specifications Incompatible materials See section reactivity Hazardous decomposition products carbon oxides. Irritating organic vapours Information on toxicological effects SECTION 11: Toxicological information General toxicological information: The mixture is classified based on the available hazard information for the ingredients as defined in the classification criteria for mixtures for each hazard class or differentiation in Annex I to Regulation (EC) No 1272/2008. Relevant available health/ecological information for the substances listed under Section 3 is provided in the following. STOT-single exposure: May cause respiratory irritation. Oral toxicity: This material is considered to have low toxicity if swallowed. Skin irritation: Causes skin irritation. Eye irritation: Causes serious eye damage. Sensitizing: May cause an allergic skin reaction. Reproductive toxicity: May damage fertility or the unborn child. Acute oral toxicity: Tetrahydrofurfuryl 2,2'-Ethylenedioxydiethyl di 2-Hydroxyethyl Value type Value Route of application time Species Method LD mg/kg oral rat OECD Guideline 401 (Acute Oral Toxicity) LD50 > mg/kg oral rat OECD Guideline 401 (Acute Oral Toxicity) LD50 > mg/kg oral rat OECD Guideline 423 (Acute Oral toxicity) LD mg/kg oral rat not specified LD50 > mg/kg oral rat not specified Acute dermal toxicity: 2-Hydroxyethyl Value Value Route of Species Method type application time LD50 > mg/kg dermal rabbit not specified

10 Loctite 3038 part B Page 10 of 14 Skin corrosion/irritation: Result time Species not irritating 0,25 h Human, EPISKIIN Reconstitute d Human Epidermis model Not Classified 4 h Human, EPISKIIN Reconstitute d Human Epidermis model Method OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis (RHE) Test Method) OECD Guideline 431 (In Vitro Skin Corrosion: Reconstructed Human Epidermis (RHE) Test Method) Serious eye damage/irritation: 2,2'-Ethylenedioxydiethyl di Result time Species Method Category I 10 min Bovine, OECD Guideline 437 (BCOP) cornea, in vitro test slightly irritating 24 h rabbit OECD Guideline 405 (Acute Eye Irritation / Corrosion) Germ cell mutagenicity: 2-Hydroxyethyl Result Type of study / Route of administration negative bacterial reverse mutation assay (e.g negative negative positive Ames test) bacterial reverse mutation assay (e.g Ames test) bacterial reverse mutation assay (e.g Ames test) in vitro mammalian chromosome aberration test Metabolic activation / time Species Method with and without OECD Guideline 471 (Bacterial Reverse Mutation Assay) with and without OECD Guideline 471 (Bacterial Reverse Mutation Assay) with and without OECD Guideline 471 (Bacterial Reverse Mutation Assay) with and without OECD Guideline 473 (In vitro Mammalian Chromosome Aberration Test) SECTION 12: Ecological information General ecological information: The mixture is classified based on the available hazard information for the ingredients as defined in the classification criteria for mixtures for each hazard class or differentiation in Annex I to Regulation (EC) No 1272/2008. Relevant available health/ecological information for the substances listed under Section 3 is provided in the following Toxicity Ecotoxicity: Do not empty into drains / surface water / ground water. Harmful to aquatic life with long lasting effects.

11 Loctite 3038 part B Page 11 of 14 Tetrahydrofurfuryl Tetrahydrofurfuryl Tetrahydrofurfuryl 2,2'-Ethylenedioxydiethyl di Value type Value Acute Toxicity Study time Species Method LC50 34,7 mg/l Fish 96 h Pimephales promelas OECD Guideline 203 (Fish, Acute Toxicity Test) EC50 > 100 mg/l Algae 72 h Desmodesmus subspicatus OECD Guideline 201 (Alga, Growth Inhibition Test) NOEC > 100 mg/l Algae 72 h Desmodesmus subspicatus OECD Guideline 201 (Alga, Growth Inhibition Test) NOEC 37,2 mg/l chronic Daphnia 21 d Daphnia magna OECD 211 (Daphnia magna, Reproduction Test) LC50 2,78 mg/l Fish 96 h Oryzias latipes OECD Guideline 203 (Fish, Acute Toxicity Test) EC50 4,56 mg/l Daphnia 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) EC50 7,68 mg/l Algae 72 h Pseudokirchnerella subcapitata OECD Guideline 201 (Alga, Growth Inhibition Test) NOEC 0,28 mg/l Algae 72 h Pseudokirchnerella subcapitata OECD Guideline 201 (Alga, Growth Inhibition Test) NOEC 0,105 mg/l chronic Daphnia 21 d Daphnia magna OECD 211 (Daphnia magna, Reproduction Test) EC50 > 515,4 mg/l Daphnia 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) EC50 > 312 mg/l Algae 72 h Pseudokirchnerella subcapitata OECD Guideline 201 (Alga, Growth Inhibition Test) LC50 16,4 mg/l Fish 96 h OECD Guideline 203 (Fish, Acute Toxicity Test) LC mg/l Fish 96 h Pimephales promelas OECD Guideline 203 (Fish, Acute Toxicity Test) EC mg/l Daphnia 48 h Daphnia magna OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) EC mg/l Algae 72 h Selenastrum capricornutum (new name: Pseudokirchnerella subcapitata) NOEC 160 mg/l Algae 72 h Selenastrum capricornutum (new name: Pseudokirchnerella subcapitata) OECD Guideline 201 (Alga, Growth Inhibition Test) OECD Guideline 201 (Alga, Growth Inhibition Test) EC0 > mg/l Bacteria 16 h not specified NOEC 24,1 mg/l chronic Daphnia 21 d Daphnia magna OECD 211 (Daphnia magna, Reproduction Test) Persistence and degradability Persistence and Biodegradability: The product is not biodegradable. Result Route of application Degradability Method

12 Loctite 3038 part B Page 12 of 14 Tetrahydrofurfuryl 2,2'-Ethylenedioxydiethyl di Not biodegradable. readily aerobic 75 % OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test) readily biodegradable aerobic 88 % OECD Guideline 301 C (Ready Biodegradability: Modified MITI Test (I)) readily biodegradable, but failing 10-day window aerobic 80 % OECD Guideline 301 F (Ready Biodegradability: Manometric Respirometry Test) readily biodegradable 85 % OECD Guideline 301 B (Ready Biodegradability: CO2 Evolution Test) readily biodegradable aerobic % OECD Guideline 301 C (Ready Biodegradability: Modified MITI Test (I)) Bioaccumulative potential / Mobility in soil Mobility: Cured adhesives are immobile. Bioaccumulative potential: No data available. Tetrahydrofurfuryl 2,2'-Ethylenedioxydiethyl di LogPow Bioconcentration factor (BCF) time Species Temperature Method 1,76 EU Method A.8 (Partition Coefficient) h Danio rerio 24 C OECD Guideline 305 (Bioconcentration: Flowthrough Fish Test) 4,95 20 C OECD Guideline 107 (Partition Coefficient (noctanol / water), Shake Flask Method) 0, C EU Method A.8 (Partition Coefficient) 1,88 not specified Results of PBT and vpvb assessment Tetrahydrofurfuryl PBT/vPvB Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria. Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vpvb) criteria Other adverse effects No data available. SECTION 13: Disposal considerations Waste treatment methods

13 Loctite 3038 part B Page 13 of 14 Product disposal: Dispose of in accordance with local and national regulations. Disposal of uncleaned packages: After use, tubes, cartons and bottles containing residual product should be disposed of as chemically contaminated waste in an authorised legal land fill site or incinerated. Disposal must be made according to official regulations. Waste code waste adhesives and sealants containing organic solvents and other dangerous substances The valid EWC waste code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users. We will be happy to advise you. SECTION 14: Transport information UN number Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR UN proper shipping name Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR Transport hazard class(es) Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR Packing group Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR Environmental hazards Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR Special precautions for user Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR Transport in bulk according to Annex II of Marpol and the IBC Code not applicable SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture VOC content < 3 % (2010/75/EC) Chemical safety assessment A chemical safety assessment has not been carried out.

14 Loctite 3038 part B Page 14 of 14 SECTION 16: Other information The labelling of the product is indicated in Section 2. The full text of all abbreviations indicated by codes in this safety data sheet are as follows: R36/37/38 Irritating to eyes, respiratory system and skin. R36/38 Irritating to eyes and skin. R41 Risk of serious damage to eyes. R43 May cause sensitisation by skin contact. R60 May impair fertility. R61 May cause harm to the unborn child. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H360 May damage fertility or the unborn child. H412 Harmful to aquatic life with long lasting effects. Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. Relevant changes in this safety data sheet are indicated by vertical lines at the left margin in the body of this document. Corresponding text is displayed in a different color on shadowed fields.