Material Safety Data Sheet according to 91/155/EEC - ISO
|
|
- Allen Goodman
- 5 years ago
- Views:
Transcription
1 Material Safety Data Sheet according to 91/155/EEC - ISO Page 1 of 6 OMNISEAL 1K PUR WHITE SDS no. : Revision: printing date: Identification of the substance/preparation and of the company/undertaking Trade name: OMNISEAL 1K PUR WHITE Intended use: 1-Component sealant Company name: Henkel Teroson GmbH Heidelberg Phone: Fax-no.: Emergency information: In case of an emergency information will be available 24h under phone +49-(0) Information office (content SDS): Product safety / TECO, Tel: +49-(0) Fax: +49-(0) Composition / information on ingredients General chemical description: 1-Component moisture-curing sealant Base substances of preparation: PUR polymer Declaration of ingredients: < 5 % Xylene - mixture of isomeres EINECS CAS R-phrases R10, R20/21, R38 < 1 % 4,4'- methylenediphenyl diisocyanate EINECS CAS R-phrases R20, R36/37/38, R42/43
2 MSDS-No.: OMNISEAL 1K PUR WHITE Page 2 of 6 < 15 % Isoparaffins C9-12 flash point > 55 C EINECS CAS R-phrases R65, R66 3. Hazards identification R42 May cause sensitization by inhalation. Persons suffering from allergic reactions to isocyanates should avoid contact with the product. 4. First-aid measures After inhalation: Fresh air, consult doctor if complaint persist. After skin contact: Rinse with running water and soap. Skin care. Change all contaminated clothing. After eye contact: First remove splashes carefully with eye swabs Wash with plenty of water immediately and continue for several minutes, holding eyelid open. Consult a doctor. After ingestion: Seek medical advice immediately and show this container or label. 5. Fire-fighting measures Suitable extinguishing media: All common extinguishing agents are suitable. Special protection equipment for fire-fighters: Wear self-contained breathing apparatus. Wear protective equipment. Hazardous combustion products: Isocyanate vapors 6. Accidental release measures Personal precautions: Avoid contact with skin and eyes. If vapors are generated, wear suitable respiratory equipment. Wear protective equipment. Keep unprotected persons away. Environmental precautions: Do not empty into drains / surface water / ground water.
3 MSDS-No.: OMNISEAL 1K PUR WHITE Page 3 of 6 Process for cleaning and take-up: Neutralise any spillages with a mixture of alcohol, water and wetting agent, if necessary adding 1% ammonia relative to the isocyanate groups. 7. Handling and storage Handling: Ensure good ventilation/suction at the workplace. Avoid skin and eye contact. Storage: Store in sealed original container protected against moisture. Store in a cool, dry place. Container must be made airtight after use. Storage at 15 to 25 C is recommended. 8. Exposure controls / personal protection Components with specific control parameters for workplace: Valid for Great Britain Basis Occupational Exposure Limits Ingredient ppm mg/m 3 Type Category Remarks 0,02 EU - Time Weighted 0,07 EU - Short Term Exposure Listed. xylene EU - Time Weighted xylene EU - Short Term Exposure xylene Skin designation: Can be absorbed through the skin. xylene EU - Time Weighted xylene EU - Short Term Exposure xylene Skin designation: Can be absorbed through the skin. xylene Listed.
4 MSDS-No.: OMNISEAL 1K PUR WHITE Page 4 of 6 Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced. Eye protection: Wear tightly fitting goggles. Body protection: suitable protective clothing General protection and hygiene measures: S.20/21 When using do not eat, drink or smoke. S.27 Take off immediately all contaminated clothes. Wash hands with soap and water on completion of work and before breaks. 9. Physical and chemical properties General characteristics State: Odor: Color(s): pasty of solvent white Phys./chem. properties: Density (20 C) Solubility (qualitative) (Solvent: water) Solubility (qualitative) (Solvent: water) Explosion limit lower [vol%] upper [vol%] 1,17 g/cm3 insoluble Reaction with water. 0,4 %(V) 7,6 %(V) 10. Stability and reactivity Conditions to avoid: Temperatures over appr. 250 C Avoid moisture. Materials to avoid: Reacts with water: Pressure built up in closed vessel (CO2).
5 MSDS-No.: OMNISEAL 1K PUR WHITE Page 5 of 6 Dangerous decomposition products: At higher temperatures isocyanate may be released. Carbon dioxide is generated under contact with moisture, leading to pressure in the cans. Danger of cans bursting! 11. Toxicological information General toxicological information: The present product is a chemical preparation within the meaning of the chemicals act. The following evaluation has been made on the basis of the toxicological data and content by weight of the individual ingredients. Persons suffering from allergic reactions to isocyanates should avoid contact with the product. Sensitizing: May cause sensitization by inhalation. 12. Ecological information General ecological information: Do not empty into drains, soil or bodies of water. 13. Disposal considerations Waste code(ewc): (after hardening) Product disposal: The valid EWC wast code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users. We will be happy to advise you. Small amounts of cured or dried product residues can be disposed of as household waste or as industrial waste similar to household waste. Special waste incineration or special disposal with the approval of the responsible local authority. 14. Transport information General information: Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR.
6 MSDS-No.: OMNISEAL 1K PUR WHITE Page 6 of Regulations - classification and identification Symbols of danger: Xn - Harmful Hazard trigger: Diphenylmethane diisocyanate 4,4'- R-phrases R42 May cause sensitization by inhalation. S-phrases : S23 Do not breathe vapour. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S28 After contact with skin, wash immediately with plenty of water. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Special declaration: Contains isocyanates. Observe manufacturer's instructions! National regulations/information: VOCV VOC regulation CH 6 % 16. Other information Full text of the R-phrases indicated by codes in this safety data sheet. The product code/identification/designation is indicated in Section 15. R10 Flammable. R20 Harmful by inhalation. R20/21 Harmful by inhalation and in contact with skin. R36/37/38 Irritating to eyes, respiratory system and skin. R38 Irritating to skin. R42/43 May cause sensitization by inhalation and skin contact. R65 Harmful: may cause lung damage if swallowed. R66 Repeated exposure may cause skin dryness or cracking. Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.
7 Material Safety Data Sheet according to 91/155/EEC - ISO Page 1 of 5 OMNISEAL 1K PUR BLACK SDS no. : Revision: printing date: Identification of the substance/preparation and of the company/undertaking Trade name: OMNISEAL 1K PUR BLACK Intended use: 1-Component sealant Company name: Henkel Teroson GmbH Heidelberg Phone: Fax-no.: Emergency information: In case of an emergency information will be available 24h under phone +49-(0) Information office (content SDS): Product safety / TECO, Tel: +49-(0) Fax: +49-(0) Composition / information on ingredients General chemical description: 1-Component moisture-curing sealant Base substances of preparation: PUR polymer Declaration of ingredients: < 5 % Xylene - mixture of isomeres EINECS CAS R-phrases R10, R20/21, R38 < 1 % 4,4'- methylenediphenyl diisocyanate EINECS CAS R-phrases R20, R36/37/38, R42/43 < 15 % Isoparaffins C9-12 flash point > 55 C EINECS CAS R-phrases R65, R66 c:\wwi\graphics\logo_techn2.bmp } { error: grafic file not found:
8 MSDS-No.: OMNISEAL 1K PUR BLACK Page 2 of 5 3. Hazards identification R42 May cause sensitization by inhalation. Persons suffering from allergic reactions to isocyanates should avoid contact with the product. 4. First-aid measures After inhalation: Fresh air, consult doctor if complaint persist. After skin contact: Rinse with running water and soap. Skin care. Change all contaminated clothing. After eye contact: First remove splashes carefully with eye swabs Wash with plenty of water immediately and continue for several minutes, holding eyelid open. Consult a doctor. After ingestion: Seek medical advice immediately and show this container or label. 5. Fire-fighting measures Suitable extinguishing media: All common extinguishing agents are suitable. Special protection equipment for fire-fighters: Wear self-contained breathing apparatus. Wear protective equipment. Hazardous combustion products: Isocyanate vapors 6. Accidental release measures Personal precautions: Avoid contact with skin and eyes. If vapors are generated, wear suitable respiratory equipment. Wear protective equipment. Keep unprotected persons away. Environmental precautions: Do not empty into drains / surface water / ground water. Process for cleaning and take-up: Neutralise any spillages with a mixture of alcohol, water and wetting agent, if necessary adding 1% ammonia relative to the isocyanate groups. 7. Handling and storage Handling: Ensure good ventilation/suction at the workplace. Avoid skin and eye contact. Storage: Store in sealed original container protected against moisture. Store in a cool, dry place. Container must be made airtight after use. Storage at 15 to 25 C is recommended. c:\wwi\graphics\logo_techn2.bmp } { error: grafic file not found:
9 MSDS-No.: OMNISEAL 1K PUR BLACK Page 3 of 5 8. Exposure controls / personal protection Components with specific control parameters for workplace: Valid for Great Britain Basis Occupational Exposure Limits Ingredient ppm mg/m 3 Type Category Remarks 0,02 EU - Time Weighted 0,07 EU - Short Term Exposure Listed. xylene EU - Time Weighted xylene EU - Short Term Exposure xylene Skin designation: Can be absorbed through the skin. xylene EU - Time Weighted xylene EU - Short Term Exposure xylene Skin designation: Can be absorbed through the skin. xylene Listed. Hand protection: Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; >= 0.7 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced. Eye protection: Wear tightly fitting goggles. Body protection: suitable protective clothing General protection and hygiene measures: S.20/21 When using do not eat, drink or smoke. S.27 Take off immediately all contaminated clothes. Wash hands with soap and water on completion of work and before breaks. 9. Physical and chemical properties General characteristics State: Odor: Color(s): pasty of solvent black Phys./chem. properties: Density (20 C) Solubility (qualitative) (Solvent: water) 1,17 g/cm3 insoluble c:\wwi\graphics\logo_techn2.bmp } { error: grafic file not found:
10 MSDS-No.: Solubility (qualitative) (Solvent: water) Explosion limit lower [vol%] upper [vol%] OMNISEAL 1K PUR BLACK Page 4 of 5 Reaction with water. 0,4 %(V) 7,6 %(V) 10. Stability and reactivity Conditions to avoid: Temperatures over appr. 250 C Avoid moisture. Materials to avoid: Reacts with water: Pressure built up in closed vessel (CO2). Dangerous decomposition products: At higher temperatures isocyanate may be released. Carbon dioxide is generated under contact with moisture, leading to pressure in the cans. Danger of cans bursting! 11. Toxicological information General toxicological information: The present product is a chemical preparation within the meaning of the chemicals act. The following evaluation has been made on the basis of the toxicological data and content by weight of the individual ingredients. Persons suffering from allergic reactions to isocyanates should avoid contact with the product. Sensitizing: May cause sensitization by inhalation. 12. Ecological information General ecological information: Do not empty into drains, soil or bodies of water. 13. Disposal considerations Waste code(ewc): (after hardening) Product disposal: The valid EWC wast code numbers are source-related. The manufacturer is therefore unable to specify EWC waste codes for the articles or products used in the various sectors. The EWC codes listed are intended as a recommendation for users. We will be happy to advise you. Small amounts of cured or dried product residues can be disposed of as household waste or as industrial waste similar to household waste. Special waste incineration or special disposal with the approval of the responsible local authority. 14. Transport information General information: Not hazardous according to RID, ADR, ADNR, IMDG, IATA-DGR. c:\wwi\graphics\logo_techn2.bmp } { error: grafic file not found:
11 MSDS-No.: OMNISEAL 1K PUR BLACK Page 5 of Regulations - classification and identification Symbols of danger: Xn - Harmful Hazard trigger: Diphenylmethane diisocyanate 4,4'- R-phrases R42 May cause sensitization by inhalation. S-phrases : S23 Do not breathe vapour. S28 After contact with skin, wash immediately with plenty of water. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). Special declaration: Contains isocyanates. Observe manufacturer's instructions! National regulations/information: VOCV VOC regulation CH 6 % 16. Other information Full text of the R-phrases indicated by codes in this safety data sheet. The product code/identification/designation is indicated in Section 15. R10 Flammable. R20 Harmful by inhalation. R20/21 Harmful by inhalation and in contact with skin. R36/37/38 Irritating to eyes, respiratory system and skin. R38 Irritating to skin. R42/43 May cause sensitization by inhalation and skin contact. R65 Harmful: may cause lung damage if swallowed. R66 Repeated exposure may cause skin dryness or cracking. Further information: This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties. c:\wwi\graphics\logo_techn2.bmp } { error: grafic file not found:
Safety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 6 omnifit 100M sds no. : 172991 Revision: 24.07.2009 printing date: 07.01.2010 Trade name: omnifit 100M Intended use: Anaerobic
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 6 Loctite 330 sds no. : 362964 Revision: 11.06.2010 printing date: 08.06.2011 Trade name: Loctite 330 Intended use: Acrylics 1.
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 7 Loctite V5004 Part B sds no. : 328930 Revision: 11.06.2010 printing date: 03.01.2012 1. Identification of the substance/preparation
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 6 3880 Adhesive Electrically Conductive SDS no. : 168456 Revision: 12.06.2008 printing date: 04.05.2009 1. Identification of the
More informationMaterial Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION Trade Name Supplier Address Abesco Ltd Laurencekirk Business Park Laurencekirk AB30 1EY Phone Number +44 (0)1561 377766 Fax Number +44 (0)1561 378887 2. COMPOSITION
More informationSafety Data Sheet. Single component polyurethane foam with propellant Fire protection of linear joints and around service penetrations
1. PRODUCT AND COMPANY IDENTIFICATION Trade Name Description Intended use Supplier Address Phone Number +44 (0)1561 377766 Fax Number +44 (0)1561 378887 Abesco FP200 FR Foam Single component polyurethane
More informationMATERIAL SAFETY DATA SHEET. According to 91 / 155 EEC
MATERIAL SAFETY DATA SHEET According to 91 / 155 EEC 1. Identification of the substance / preparation and of the company / undertaking Product details: Trade name: ISONAT 200 Application of the substance
More information1. Identification of the substance / preparation and of the company. Trade name: Enzymatic cleaning. Part number:
1. Identification of the substance / preparation and of the company Enzymatic cleaning Trade name: Part number: 099-021 Use of the substance / preparation: Detergent for in-vitro diagnostic use (cleaner
More informationTECHNOMELT PUR 3460 MSDS-No. : V001.0 Revision: printing date:
Safety Data Sheet Page 1 of 6 TECHNOMELT PUR 3460 MSDS-No. : 44543 Revision: 19.12.2013 printing date: 31.03.2017 Section 1. Identification of the substance/preparation and of the company/undertaking Product
More informationSAFETY DATA SHEET DALER ROWNEY ALKYD GEL MEDIUM 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name Supplier DALER-ROWNEY LTD, PEACOCK LANE, BRACKNELL, RG12 8SS, ENGLAND. Emergency tel : +44 (0) 1344 461000/ fax
More informationIdent-No: HARDENER HV 998
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product information Trade name : HARDENER HV 998 Use : Hardener for adhesive systems Company : Huntsman Advanced Materials (Hong
More informationSafety Data Sheet according to Regulation (EC) No1907/2006
Safety Data Sheet according to Regulation (EC) No1907/2006 LOCTITE ABLESTIK 104MOD3 PTB known as ECCOBOND 104 MOD Page 1 of 9 SDS No. : 374036 Revision: 23.01.2014 printing date: 01.05.2015 SECTION 1:
More information1. Identification of the substance/preparation and of the company/undertaking
1. Identification of the substance/preparation and of the company/undertaking Trade name: MPC 20 Multi-Purpose Cleaner Identification of the company Beacon Products P/L ABN: 93616146555 Suite 4A3 410 Elizabeth
More informationCIPROXIFAN (cas ) MSDS
Click http//www.guidechem.com/cas-184/184025-19-2.html for suppliers of this product CIPROXIFAN (cas 184025-19-2) MSDS 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product
More informationSAFETY DATA SHEET DALER ROWNEY 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name Supplier DALER-ROWNEY LTD, PEACOCK LANE, BRACKNELL, RG12 8SS, ENGLAND. Emergency tel : +44 (0) 1344 461000/ fax
More informationEC safety data sheet. 1.) Identification of the substance/preparation and of the company/undertaking. 2.) Hazards identification
1.) Identification of the substance/preparation and of the company/undertaking Identification of the substance or preparation Trade name Zinc dust Use of the substance/preparation anti corrosive foundation,
More informationSafety Data Sheet according to (EC) No 1907/2006
Safety Data Sheet according to (EC) No 1907/2006 STYCAST 2850 FT BLUE(BE) 20KG P Page 1 of 9 sds no. : 373795 Revision: 17.05.2011 printing date: 22.06.2011 SECTION 1: Identification of the substance/mixture
More informationSAFETY DATA SHEET EVO-STIK EPOXY RAPID HARDENER
Revision Date September 2011 Revision 1 1 / 5 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Product No. 808522,
More informationMaterial Safety Data Sheet
SiSiB PC4100 Page 1 of 5 1. IDENTIFICATION OF SUBSTANCE AND SUPPLIER Product Number: SiSiB PC4100 Product Name: 3-Methacryloxypropyltrimethoxysilane Manufacturer / Supplier: Power Chemical Corporation.
More informationMaterial Safety Data Sheet
Material Safety Data Sheet According to 91/155 EC Printing date 28.04.2003 Reviewed on 17.02.2003 1 Identification of the substance/preparation and of the company/undertaking Product details Trade name:
More informationSafety data sheet. Cement is irritating to the eyes, respiratory tract and mucous membranes.
1 Identification of the product and the company: Identification of the product: Trade name: Fine Microcement Recommended uses Decorative coating. 2 Information on ingredients Chemical description: Mixture
More informationSafety Data Sheet according to 1907/2006/EC, Article 31
Page 1/5 1 Identification of the substance/preparation and of the company/undertaking Product details Trade name: UZIN KR 421 Komp. A Application of the substance / the preparation 2-Component Epoxy Resin
More informationSafety Data Sheet According to EC Directive 91/155/EEC Date of issue: Supersedes edition of
Safety Data Sheet Date of issue: 12.10.2004 Supersedes edition of 07.08.2003 1. Identification of the substance/preparation and of the company/undertaking Identification of the product Use of the substance/preparation
More informationMaterial Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) 1 Identification of the substance/mixture and of the company/undertaking
Page 1 of 5 1 Identification of the substance/mixture and of the company/undertaking Informations to product No. g662 Product name: Kajeputöl, naturidentisch Cajeput oil, nature identical Supplier of the
More informationSafety Data Sheet. according to Regulation (EU) No. 1907/ Identification of the substance/preparation and of the company/undertaking
Print date: 12.04.2011 MSDS: Page 1 of 5 1. Identification of the substance/preparation and of the company/undertaking MSDS-ID: Company/undertaking identification Company name: Street: Place: Fahltskamp
More information1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/ UNDERTAKING
SAFETY DATA SHEET Page 1 / 5 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/ UNDERTAKING 1.1 Identification of the article 1.1.1 Commercial Product Name 1.1.2 Product code 008 7605 1.2
More informationSAFETY DATA SHEET (according to EC directive 1907/2006) Update : Version: 1.3 Date : BREAK-THRU S 240
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Trade name : Usage : Industrial Use Information on manufacturer/supplier : Evonik Goldschmidt GmbH Goldschmidtstr. 100 45127
More informationIdentification of the substance/preparation and of the company/undertaking
Conforms to 91/155/EEC - 2001/58/EC SAFETY DATA SHEET CASCO CONTACT THINNER 1. Identification of the substance/preparation and of the company/undertaking Product name Product number 85 Chemical description
More informationSAFETY DATA SHEET (91/155/EC) IDENTIFICATION OF THE SUBSTANCE /
SAFETY DATA SHEET (91/155/EC) 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY * Product name: BLACK BISON PASTE WAX * Supplier: LIBERON Mountfield Ind Est New Romney Kent, TN28 8XU Tel:
More informationSAFETY DATA SHEET. 1/6 Revision Date: Document No.: 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1/6 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Container size: 1 l, 5 l Application: Supplier: Cat. No. 49900038, 49900039 Emergency telephone: +45 44 600 800 (Only during
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING 1/7 Application: For embedding of specimens Container size: 1 l Supplier: Struers A/S Valhøjs Allé 176
More informationSAFETY DATA SHEET Break-Free CLP-E
Break-Free CLP-E Page 1 of 5 SAFETY DATA SHEET Break-Free CLP-E SECTION 1: Identification of the substance/mixture and of the company/undertaking Date issued 18.12.2012 1.1. Product identifier Product
More informationSAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking
SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name or designation of the mixture Registration number - Synonyms Product
More informationMaterial Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) 1 Identification of the substance/mixture and of the company/undertaking
Page 1 of 5 1 Identification of the substance/mixture and of the company/undertaking Informations to product No. g444 Product name: Lemon oil Citronenöl Supplier of the Product / responsible Company: Caesar
More informationintermix yellow oxide tinter
SAFETY DATA SHEET intermix yellow oxide tinter 1 of 5 13-Oct-26 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY Product name Company intermix yellow oxide tinter Pro-Spray Automotive Finishes
More informationSPECTINOMYCIN DIHYDRCHLORIDE PENTAHYDRATE
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Chemical product name : Spectinomycin dihydrochloride pentahydrate Common chemical name : -- Synonyms : -- Chemical formula : C 14 H 24 N 2 O 7. 2HCl. 5H
More informationSAFETY DATA SHEET According to 1907/2006/EC, Article 31 as amended by 453/2010/EC
1. IDENTIFICATION OF SUBSTANCE / MIXTURE AND COMPANY Product Identifier Compound Name : ORANGE BLOSSOM FRAGRANCE Relevant identified uses of the substance/mixture and uses advised against Concentrated
More informationVersion 1.1 SDB_GB Revision Date Print Date Identification of the substance/mixture and of the company/undertaking
1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Trade name : 1.2 Relevant identified uses of the substance or mixture and uses advised against Use of the
More informationMaterial Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) 1 Identification of the substance/mixture and of the company/undertaking
Page 1 of 5 1 Identification of the substance/mixture and of the company/undertaking Informations to product No. 4178 Product name: Chlorhexidini digluconatis solutio Supplier of the Product / responsible
More informationMaterial Safety Data Sheet
Page 1 of 7 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY 1.1. Product identification: 1.2. Other identified applications of the substance or mixture and application advised against: Liquid
More informationSDS Safety Data Sheets
SECTION 1 IDENTIFICATION OF THE MATERIAL AND SUPPLIER Company name and address: G-Planter (SCC) Sdn Bhd 11 A Jalan Mahsuri Kaw. Industri Jalan Mersing 86000 Kluang, Johor Emergency Phone: 07-7878488 Trade
More informationABLEBOND 84-1LMISR4. Section 2. Composition / information on ingredients. Section 3. Hazards identification.
Safety Data Sheet Page 1 of 6 MSDS-No. : 374132 Revision: 25.04.2014 printing date: 27.03.2015 Section 1. Identification of the substance/preparation and of the company/undertaking Product name: Trade
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name: 1,6-HEXANEDIOL DIGLYCIDYL ETHER CAS No.: 16096-31-4 Brand: Alfa Chemistry Company:
More information*** SAFETY DATA SHEET ***
*** SAFETY DATA SHEET *** 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME ABLEBOND FS849-TI RECOMMENDED USE SUPPLIER Adhesive Henkel Limited Station Road Linton
More informationNo Change Service! Version Revision Date Print Date
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Trade name : Producer/Supplier : Schülke & Mayr GmbH Robert-Koch-Str. 2 22851 Norderstedt Germany Telephone:
More informationSafety Data Sheet ULTRAPLAN RENOVATION
Safety Data Sheet dated 13/5/2010, version 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Trade name: Product type and use: Cement based levelling mortar. Supplier: MAPEI
More information*** SAFETY DATA SHEET ***
*** SAFETY DATA SHEET *** 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME Permabond 802 RECOMMENDED USE SUPPLIER Adhesive Permabond Engineering Adhesives Ltd
More information: Corian Joint Adhesive Kit - Component A
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
More informationSAFETY DATA SHEET : KIWI SELECT -SMOOTH LEATHER- SELFSHINE CREAM
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name Product code : : TH-KG80 Intended use : Product to maintain shoes. Supplier : BAMA INTERNATIONAL Pfalzgraf-Otto-Strasse 50 D-74821 MOSBACH Germany
More informationMaterial Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) 1 Identification of the substance/mixture and of the company/undertaking
Page 1 of 5 1 Identification of the substance/mixture and of the company/undertaking Informations to product No. 2069 Product name: Aluminii chloridum hexahydricum Aluminium chloride hexahydrate Supplier
More informationSAFETY DATA SHEET. This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006
SAFETY DATA SHEET This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name GRINDSTED
More informationDARENT WAX COMPANY LIMITED SAFETY DATA SHEET
1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Material/trade name: Product number(s): 14504 14219-15508 1.2. Relevant identified uses of the substances
More informationSAFETY DATA SHEET EVO-STIK SILICONE BUILDING SEALANT WHITE
Revision Date July 2014 1 / 6 SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product
More informationMATERIAL SAFETY DATA SHEET TAMPUR 100
MATERIAL SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME APPLICATION SUPPLIER One component isocyanate based sealant NORMET Australia PTY Ltd
More informationSAFETY DATA SHEET Loxeal Adesivo 34
Revision Date 25/01/2013 Revision 1 SAFETY DATA SHEET Loxeal Adesivo 34 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name Loxeal Adesivo
More informationSAFETY DATA SHEET. 1/7 Revision Date: Document No.: 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
1/7 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Container size: 500 ml, 1 l Application: Supplier: Cat. No. 40200073, 40200072 Emergency telephone: +45 44 600 800 (Only
More informationSafety Data Sheet according to (EC) No 1907/2006
Safety Data Sheet according to (EC) No 1907/2006 Igora Vario Blond Extra Power Page 1 of 9 sds no. : 368486 Revision: 15.01.2013 printing date: 19.02.2013 1. Identification of the substance/mixture and
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET ELAN CHEMICAL COMPANY, INC Date Printed: October 23, 2007 Date Updated: December 1, 2005 1. Product /Company Identification Product Name: NATURAL ALDEFRESH Manufacturer: Elan
More informationSAFETY DATA SHEET according to 1907/2006/EC, Article 31
SAFETY DATA SHEET according to 197/26/EC, Article 31 Thermal Compound (S66C) SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Thermal
More informationMaterial Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH) 1 Identification of the substance/mixture and of the company/undertaking
Page 1 of 5 1 Identification of the substance/mixture and of the company/undertaking Informations to product No. 4848 Product name: Dihydrocodeinhydrogentartrat Supplier of the Product / responsible Company:
More informationEssential oils,sandalwood (cas ) MSDS
Click http//www.guidechem.com/cas-800/8006-87-9.html for suppliers of this product Essential oils,sandalwood (cas 8006-87-9) MSDS 1. 1.1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET ELAN CHEMICAL COMPANY, INC Date Printed: October 23, 2007 Date Updated: August 26, 2005 1. Product /Company Identification Product Name: NATURAL ACETIC ACID Manufacturer: Elan
More informationMaterial Safety Data Sheet acc. to ISO 11014
Page 1/7 1 Identification of the substance/mixture and of the company/undertaking Product details Article number N9300178 Application of the substance / the preparation Laboratory chemicals Manufacturer/Supplier:
More informationSafety Data Sheet. according to Regulation (EC) No 1907/2006. Coltosol F
according to Regulation (EC) No 107/2006 Print date: 03.04.2013 Page 1 of 5 SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifier Relevant identified uses
More informationSafety Data Sheet according to (EC) No 1907/2006
Safety Data Sheet according to (EC) No 1907/2006 LOCTITE 3880 Page 1 of 9 sds no. : 168456 Revision: 15.06.2011 printing date: 19.10.2011 SECTION 1: Identification of the substance/mixture and of the company/undertaking
More informationPRODUCT SAFETY DATA SHEET
PRODUCT SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING 1.1. Product Identifiers Product Name: Powder paints 1.2. Relevant Identified uses of the substance
More informationThis SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
More informationMaterial Safety Data Sheet
Material Safety Data Sheet DAVANA Date: July 2013 1. Product and Supplier Description Trade Name: Davana INCI Name: Artemisia Pallens Flower Oil Supplier: Aromantic Ltd 17 Tytler Street Forres Moray IV36
More informationSAFETY DATA SHEET ARALDITE FUSION HARDENER
1 / 4 REVISION DATE: September 2007 SDS NO.: 16447 SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME PRODUCT NO. 808300, 80840, 808416, 808423
More informationSAFETY DATA SHEET FILDEK FLEXIBLE DECK COATING HARDENER
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING PRODUCT NAME INTERNAL ID APPLICATION SUPPLIER FILDEK405H/4 Component of epoxy coating system Don Construction
More informationSAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification
Page: 1 Compilation date: 12/01/2010 Revision date: 10/12/2010 Revision No: 2 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: Product
More informationSafety Data Sheet. according to Regulation (EC) No 1907/2006. GuttaFlow bioseal
Page 1 of 5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier 1.2. Relevant identified uses of the substance or mixture and uses advised against
More informationPrinting date 01/12/2006 Reviewed on 01/12/2006
Page 1/5 * 1 Identification of substance Product details Article number: 10848 Application of the substance / the preparation Surface protection Manufacturer/Supplier: AKEMI chemisch technische Spezialfabrik
More informationSAFETY DATA SHEET Anglo Safe-T-Epoxy, Resin
SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING PRODUCT NAME SUPPLIER Anglo Building Products Ltd RUST-OLEUM UK Ltd Unit 6, Spitfire Close Coventry Business Park
More informationSAFETY DATA SHEET ULTRACRETE PERMA-SOIL
Revision Date 11/12/2012 Revision 2 Supersedes date 1/0/2011 1 / SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product name
More informationSafety Data Sheet according to 1907/2006/EC, Article 31
Page 1/5 1 Identification of the substance/preparation and of the company/undertaking Product details Trade name: UZIN PE 460 Komp. A Application of the substance / the preparation Epoxy DPM (Component
More informationSAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
STAIN BLOCK Page 1 Issued: 12/01/2004 Revision No: 1 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING Product name: STAIN BLOCK Product code: STAINSTP Company name: EVERBUILD
More informationEU Safety Data Sheet. Enzyme Conjugate. 1 Identification of the substance/mixture and of the company
nonr 1 Identification of the substance/mixture and of the company 1.1 Trade Name (As Labeled): 1.2 Product Use: Used as for HCP ELISA. For in-vitro use only 1.3 Manufacturer s Name: BioGenes GmbH Address:
More informationContains: Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%), 60-80% EC No.:
1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Material/trade name: Product number(s): 91003 / 91125 1.2. Relevant identified uses of the substances or
More informationMATERIAL SAFETY DATA SHEET KAPA Library Quantification DNA Standards Prepared in accordance with EU directive 91/155/EEC. Revision date:
MATERIAL SAFETY DATA SHEET KAPA Library Quantification DNA Standards Prepared in accordance with EU directive 91/155/EEC. Revision date: 2012-09-03 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
More informationSAFETY DATA SHEET according to Regulation (EC) No. 1907/2006
SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 AXCELA Version 1.1 / EN Revision Date 19.08.2013 Print Date 23.09.2013 1. Identification of the substance/mixture and of the company/undertaking
More informationSAFETY DATA SHEET According to 1907/2006/EC, Article 31 as amended by 453/2010/EC
1. IDENTIFICATION OF SUBSTANCE / MIXTURE AND COMPANY Product Identifier Compound Name : WILD MINT AND TEA FRAGRANCE Relevant identified uses of the substance/mixture and uses advised against Concentrated
More informationMATERIAL SAFETY DATA SHEET Issue Date: June 27, 2018
Sheep anti mouse prothrombin IgG fraction, FITC labeled Page 1 of 6 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: Sheep anti mouse
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET ELAN CHEMICAL COMPANY, INC Date Printed: October 23, 2007 Date Updated: October 13, 2005 1. Product /Company Identification Product Name: GERANYL ACETATE EXTRA Manufacturer:
More informationSAFETY DATA SHEET (SDS) According to EC Regulation 1907/2006/EC and Subsequent Amendments
A42 SUPER GLUE 01 IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY Trade Name : DEMSUN A42 SUPER GLUE Company : AKTEK DIŞ TİCARET LTD ŞTİ Adress : Yeşilbayır Mah. Şimşir Sk. No: 20 34555 Hadımköy İstanbul
More informationREVISION MATERIAL SAFETY DATA SHEET
REVISION MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: PRESEPT* Disinfectant Tablets PRESEPT* Disinfectant Granules Chemical Composition: Contains Sodium dichloroisocyanurate
More informationSAFETY DATA SHEET WICKES METAL EPOXY PUTTY
Revision Date November 2011 Revision 8 1 / 5 SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier
More informationMATERIAL SAFETY DATA SHEET BLACKCURRANT 543 Page 1(4) Date: 6 April 2004 MSDS Revision: 02 Date created: 12/07/02
The Soap Kitchen Unit 8 Caddsdown Industrial Park, Clovelly Road, Bideford, Devon, EX39 3DX Tel: 01237 420872 (+44 (0)1237 420872) Email: info@thesoapkitchen.co.uk BLACKCURRANT 543 Page 1(4) 1.Identification
More informationMaterial Safety Data Sheet
Material Safety Data Sheet CEDARWOOD Date: July 2013 1. Product and Supplier Description Trade Name: Cedarwood INCI Name: Cedrus Atlantica bark oil CAS Number: 92201-55-3 EC (EINECS) NO.: 295-985-9 Supplier:
More informationThis SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
More informationMaterial Safety Data Sheet (MSDS)
1. PRODUCT AND COMPANY IDENTIFICATION Product Name Etoposide Product Number 2200 Identified Uses For Research Use Only (RUO). Not intended for use in humans or animals. Not intended for therapeutic or
More informationSafety Data Sheet according to (EC) No 1907/2006
Safety Data Sheet according to (EC) No 1907/2006 LOCTITE 572 50ML EN Page 1 of 9 sds no. : 153495 Revision: 13.07.2012 printing date: 09.01.2014 SECTION 1: Identification of the substance/mixture and of
More informationMATERIAL SAFETY DATA SHEET RATSHOT Rodenticide blocks
1 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY Company Product name RATSHOT Rodenticide Blocks Company FREEZONE Public health Ltd PO BOX 591 Sandgate QLD 4017 craig@freezone.net.au
More informationSAFETY DATA SHEET ARALDITE RAPID STEEL HARDENER
1 4 REVISION DATE: September 2007 SDS NO.: 12758 SAFETY DATA SHEET 1 IDENTIFICATION OF THE SUBSTANCEPREPARATION AND OF THE COMPANYUNDERTAKING PRODUCT NAME PRODUCT NO. 80815 SUPPLIER 2 HAZARDS IDENTIFICATION
More informationSafety Data Sheet ADDCURE 943S
Safety Data Sheet dated 9/3/2011, version 1 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product Identifier Mixture identification: Trade name: 1.2 Relevant identified
More information