SOLUTIONS. Fracturing Chemicals Oil & Gas. Connecting You with a Network of. Toll Free (U.S.):
|
|
- Lily Butler
- 5 years ago
- Views:
Transcription
1 Fracturing Chemicals Oil & Gas Connecting You with a Network of SOLUTIONS For availability on specific products, and to place your order: Toll Free (U.S.): nexeosolutions.com
2 BIOCIDES B-1203 & MBC-514 Fast-acting biocide that will control most bacteria including SRB and APB. Miscible with water and easily dispersed. Typical loadings range from 0.3 to 0.5 gpt. 12% Glutaraldehyde 3% Quat MBC-516 MYACIDE GA 25 MYACIDE GA 50 MBC-095 MBC-205 MBC-220 AMA -324 AVANCID 20 AVANCID 75 Bellacide 355 Bellacide 300 Fast-acting biocide that will control most bacteria including SRB and APB. Miscible with water and easiy dispersed. Typical loadings range from 0.3 to 0.5 gpt. Fast-acting biocide, highly effective against aerobes, SRB, APB. Consumed by FeS and oxidizers. Reduced efficacy at high temperatures and high ph. Fast-acting biocide, highly effective against aerobes, SRB, APB. Consumed by FeS and oxidizers. Reduced efficacy at high temperatures and high ph. Fast-acting solid biocide with great environmental profile. Product has a rapid decomposition, is nonpersistent, and biodegrades to naturally ocurring products. Fast-acting liquid biocide with great environmental profile. Product has a rapid decomposition, is nonpersistent, and biodegrades to naturally ocurring products. Fast-acting liquid biocide with great environmental profile. Product has a rapid decomposition, is nonpersistent, and biodegrades to naturally ocurring products. Cost-effective, caustic-based, broad-spectrum biocide used for long-term bacteria control in the reservoir. The combination of this biocide and an anionic friction reducer will drop treating pressure. Typical loadings of 0.4 to 0.75 gpt. Broad-spectrum biocide developed to inhibit the growth of bacteria. Effective in both acid and alkaline environments. Especially effective against SRB. Broad-spectrum biocide developed to inhibit the growth of bacteria. Effective in both acid and alkaline environments. Especially effective against SRB. The only fast-acting and long-lasting biocide in the market, highly effective against aerobes, SRB, APB. Concentrated 5% active tributyl tetradecyl phosphonium chloride (TTPC). Compatible with oxidizers such as chlorine dioxide. Also controls biofilm, reducing microbially induced corrosion. Highly effective, synergistic biocide and biodispersant, possessing both bactericidal and algaecidal properties, for use in oil and gas applications. Bellacide 300 is a concentrated 5% active synergistic blend non-oxidizing biocide containing tributyl tetradecyl phosphonium chloride (TTPC). 25% Glutaraldehyde 12% Quat 25% Glutaraldehyde 50% Glutaraldehyde 97% DBNPA (solid) 5% DBNPA 20% DBNPA 24% Dazomet Registered THPS - 20% Registered THPS - 75% 5% Active TTPC Biocide 2.5% TTPC 2.5% Quat CUSTOMIZED SOLUTIONS There is not a one size fits all when it comes to stimulation chemicals. Let us work with you to customize the best chemistries tailored specifically for your well conditions. 2
3 BREAKERS NexStim BK-1100 Ammonium persulfate oxidizing breaker designed for use in applications from 130 to 180 F. Ammonium Persulfate NexStim BK-1205 NexStim BK-1305 NexStim BK-1405 NexStim BK-1608 NexStim BK-2105 NexStim BK-2205 Sodium persulfate oxidizing breaker designed for use in applications from 130 to 180 F. Typical loadings range from 0.25 to 2.0 ppt. Delayed low-temperature encapsulated ammonium persulfate breaker designed for slow release that allows delayed break of the fracturing fluid, higher breaker concentrations without compromising fluid rheology at temperatures of 140 to 200 F. Typical loadings range from 0.25 to 2.0 ppt. Delayed high-temperature encapsulated ammonium persulfate breaker designed for slow release that allows delayed break of the fracturing fluid, higher breaker concentrations without compromising fluid rheology at temperatures of 180 to 240 F. Typical loadings range from 0.25 to 2.0 ppt. Sodium perborate oxidizing breaker is used to degrade friction reducers used in slickwater fracturing. Typical loadings are two times the friction reducer loading. 2% active oxidizing breaker solution of salts and chlorites. Effective at temperatures above 180 F at neutral ph fluids and above 225 F in fluids having ph above 9.5. The loading ranges from 1.0 to 4.0 gpt. 10% active oxidizing breaker solution of salts and chlorites. Effective at temperatures above 180 F at neutral ph fluids and above 225 F in fluids having ph above 9.5. The loading ranges from 1.0 to 4.0 gpt. NexStim BK-3105 Biodegradable enzyme breaker effective at temperatures of F and ph range of 5.5 to Loading ranges of 0.5 to 1.0 gpt NexStim BK-4105 NexStim BK-4205 NexStim BK-5105 NexStim BK-5205 BREAKER CATALYSTS Sodium bromate oxidizing breaker designed for temperatures from 240 to 300 F. At lower temperatures an activator like NexStim BK-6105 is required. Typical loadings range from 0.25 to 2.0 ppt. Delayed sodium bromate oxidizing breaker designed for controlled release rates at temperatures from 240 to 300 F. Typical loadings range from 0.25 to 2.0 ppt. Liquid 8% hydrogen peroxide oxidizing breaker is used to degrade friction reducers used in slickwater fracturing. Typical loadings are two times the friction reducer loading. Delayed breaker slurry for guar- or guar derivative-based fracturing fluids. Effective at temperatures ranging from 150 to 200 F. Typical loadings range from 0.5 to 4.0 gpt. Sodium Persulfate Encapsulated Ammonium Persulfate Encapsulated Ammonium Persulfate Sodium Perborate 2% Chlorite Breaker 10% Chlorite Breaker Low Temp Enzyme Breaker Sodium Bromate Encapsulated Sodium Bromate 8% Hydrogen Peroxide Breaker Calcium Peroxide Slurry Breaker NexStim BK-6105 BUFFERS NexStim BF-1100 NexStim BF-2105 NexStim BF-2205 NexStim BF-3105 NexStim BF-4105 NexStim BF-5105 Liquid breaker catalyst that helps oxidizing breakers such as NexStim BK-2105 and 2205 function in a lower temperature application and still have the same efficacy. Typical loadings range from 0.25 to 1.0 gpt. Acidic solution used to lower ph and assist hydration of carboxymethyl hydroxypropyl guar (CMHPG) in boron-contaminated frac water or the presence of saline water. Fluid ph is dependent on loading and should be determined in field before use. 25% sodium hydroxide solution used to adjust ph of linear gels to optimum crosslinking ph. Loadings should be determined based on pre-job testing of the frac fluid rheology properties. 50% sodium hydroxide solution used to adjust ph of linear gels to optimum crosslinking ph. Loadings should be determined based on pre-job testing of the frac fluid rheology properties. 45% potassium carbonate buffer solution used to stabilize fluid ph. This product helps to optimize the performance of crosslinkers by controlling the ph of the fluid, especially in high temperature applications above 260 F. Buffer composed of a mixture of potassium carbonate and potassium hydroxide solution to stabilize fluid ph. It helps to optimize the performance of crosslinkers by controlling the ph of the fluid, especially in high temperature applications above 260 F. Synthetic caustic replacement buffer used to optimize the performance of crosslinkers by controlling the ph of the fluid, especially in high temperature applications above 260 F. 56% Acetic Acid 25% Sodium Hydroxide 50% Sodium Hydroxide 45% Potassium Carbonate Potassium Carbonate/ Potassium Hydroxide Blend Environmentally Safe Caustic Replacement nexeosolutions.com
4 CLAY CONTROL NexStim CC-1100 NexStim CC-1200 NexStim CC-1300 NexStim CC-2105 CROSSLINKERS NexStim CL-1105 NexStim CL-1205 NexStim CL-1305 NexStim CL-1405 NexStim CL-2105 KCl substitute designed to provide clay stabilization in clay-sensitive formations. Typical loadings range from 0.5 to 2.0 gpt. KCl substitute designed to provide clay stabilization in clay-sensitive formations. Typical loadings range from 0.5 to 2.0 gpt. KCl substitute designed to provide clay stabilization in clay-sensitive formations. Typical loadings range from 0.5 to 2.0 gpt. Biodegradeable KCl substitute designed to provide clay stabilization in clay-sensitive formations. Typical loadings range from 0.5 to 2.0 gpt. Instant surface crosslinker or crosslinking accelerator that provides immediate viscosity for buffered guar-based fracturing fluids. When used together with delayed crosslinkers, the loading will be dependent on the desired crosslink time, but can range from 0.25 to 0.75 gpt. Instant surface crosslinker or crosslinking accelerator that provides immediate viscosity for buffered guar-based fracturing fluids. When used together with delayed crosslinkers, the loading will be dependent on the desired crosslink time, but can range from 0.25 to 0.75 gpt. Self ph adjusting, instant borate crosslinker or crosslinking accelerator with a buffer to adjust the fluid ph to provide immediate viscosity for guar-based fracturing fluids. Loadings can range from 0.25 to 0.75 gpt. Delayed ulexite-based borate crosslinker designed to slowly release borate ions. It is recommended for higher temperature applications ranging from 180 to 300 F. Typical loadings range from 0.75 to 2.0 gpt. Delayed borate crosslinker designed to crosslink ultra-low loadings of guar-based gels. Typical gel loadings range from 8 to 15 ppt. The crosslinked fluid is specifically designed to complement slickwater fracturing, providing friction reduction, enhanced fracture growth, and proppant transport while decreasing polymer damage. 70% Choline Chloride 60% Choline Chloride 50% Choline Chloride 2% Borate 5% Borate Self-Buffering 5% Borate Ulexite Slurry Borate Crosslinker for 8 ppt to 15 ppt gels FULL SERVICE SOLUTIONS We re the only call you need. From chemical and formula analysis to application performance testing and formulation development, our labs have experts dedicated to the Oil & Gas industry. Need customized waste programs? Our Environmental Services team has you covered with on-site support. 4
5 CROSSLINKERS (continued) NexStim CL-3105 NexStim CL-3205 NexStim CL-3305 FLOW BACK AIDS NexStim FB-1105 NexStim FB-1205 NexStim FB-1305 NexStim FB-1405 NexStim FB-1505 Alcohol-based zirconium-based crosslinker for both high and low ph fracturing fluids. Used with guar derivatives such as hydroxypropyl guar (HPG) or carboxymethyl HPG (CMHPG). It can also crosslink carboxylated cellulose derivatives. Can also be used in high temperature applications from 275 to 350 F. Typical loadings range from 0.5 to 1.25 gpt. Alcohol -based zirconium-based crosslinker for both high and low ph fracturing fluids. Used with guar derivatives such as hydroxypropyl guar (HPG) or carboxymethyl HPG (CMHPG). It can also crosslink carboxylated cellulose derivatives. Can also be used in high temperature applications from 275 to 350 F. Typical loadings range from 0.5 to 1.25 gpt. Water-based zirconium-based crosslinker for both high and low ph fracturing fluids. Used with guar derivatives such as hydroxypropyl guar (HPG) or carboxymethyl HPG (CMHPG). It can also crosslink carboxylated cellulose derivatives. Can also be used in high temperature applications from 275 to 350 F. Typical loadings range from 0.5 to 1.25 gpt. Proprietary blend of surfactants designed to improve fluid recovery in hydraulic fracturing applications. In addition, the products are designed to prevent emulsions and to assist in the release of bound oil from reservoir rock. Typical loadings range from 0.25 to 3.0 gpt. Proprietary blend of specialty surfactants designed to provide improved fluid recovery in hydraulic fracturing applications. Also improves oil recovery in fractured carbonate formations and CO2 flooding applications. It lowers interfacial tension (IFT) and modifies the wettability of formation surfaces to strongly water-wet conditions. Proprietary blend of specialty surfactants designed to provide improved fluid recovery in hydraulic fracturing applications. Also improves oil recovery in fractured carbonate formations and CO2 flooding applications. It lowers interfacial tension (IFT) and modifies the wettability of formation surfaces to strongly water-wet conditions. Non-emulsifier blend of non-ionic surfactants and resins designed to minimize the emulsion tendencies between the treating fluid and downhole reservoir fluids such as crude oil. It also is works as a flowback aid by reducing capillary pressure to assist in fluid recovery and prevent water blocks. Loadings can range from 0.5 to 2.0 gpt. Surfactant microemulsion blend designed to assist fluid recovery after stimulation, enhance oil recovery to increase initial production, and prevent downhole emulsions between the crude oil and treating fluid. All product components are on the EPA s chemical Design for the Environment (DfE) Safer Chemical Ingredients List. Zirconate Zirconate Zirconate nexeosolutions.com
6 FRICTION REDUCERS NexStim FR-1102 NexStim FR-1202 NexStim FR-1302 NexStim FR-2102 NexStim FR-2202 NexStim FR-2302 NexStim FR-2402 GELLING AGENTS Anionic polymer emulsion friction reducer designed for use in freshwater. Typical dosages range from to 0.5 gpt. Anionic polymer emulsion friction reducer designed for use in medium brines (monovalent salts). Typical dosages range from to 0.5 gpt. Anionic polymer emulsion friction reducer designed for use in high brines (divalent salts). Typical dosages range from to 1 gpt. Cationic polymer emulsion friction reducer designed for use in water, brines, and acids. Typical dosages range from 0.25 to 1 gpt. Cationic polymer emulsion friction reducer designed for use in freshwater. Typical dosages range from to 0.5 gpt. Cationic polymer emulsion friction reducer designed for use in medium brines (monovalent salts). Typical dosages range from to 0.5 gpt. Cationic polymer emulsion friction reducer designed for use in high brines (divalent salts). Typical dosages range from to 1 gpt. NexStim GA ppg mineral oil slurry of 35/40 fast hydrating guar gum. Designed to achieve 80% hydration in 3-5 min, depending on water temperature and quality. NexStim GA ppg mineral oil slurry of 40/45 fast hydrating guar gum. Designed to achieve 80% hydration in 3-5 min, depending on water temperature and quality. NexStim GA ppg mineral oil slurry of CMHPG. Designed to achieve 80% hydration in 1 min, but may require water ph adjustment to 6.5 to 7.0 in saline water. Anionic Polymer-Based Anionic Polymer-Based Anionic Polymer-Based Cationic Polymer-Based Cationic Polymer-Based Cationic Polymer-Based Cationic Polymer-Based 35/40 Guar Slurry 40/45 Guar Slurry CMHPG Slurry NexStim GA ppg mineral oil slurry of xanthan gum. Used for sweeps and suspensions in coiled tubing applications. Xanthan Slurry GEL STABILIZERS NexStim GS-1105 NexStim GS-2105 IRON CONTROL NexStim IC-1103 NexStim IC-1203 NexStim IC-2100 Gel stabilizer designed to aid in stabilizing crosslinked gels and other polymers susceptible to oxidative thermal degradation. Gel stabilizer designed to aid in stabilizing crosslinked gels and other polymers susceptible to oxidative thermal degradation. Dissolves iron sulfide and penetrates and removes deposits. Its corrosion-inhibiting properties are linked to its ability to dissolve iron sulfide at low concentrations. It also has an environmentally safe profile for both humans and environmental species and has been shown to be readily biodegradable. Dissolves iron sulfide and penetrates and removes deposits. Its corrosion-inhibiting properties are linked to its ability to dissolve iron sulfide at low concentrations. It also has an environmentally safe profile for both humans and environmental species and has been shown to be readily biodegradable. Mild organic acid that is primarily used to control iron generated from break-down acids. Also used to lower high ph levels. 40% Sodium Thiosulfate 85% Triethanolamine Unregistered THPS - 75% Unregistered THPS - 20% 50% Citric Acid Solution 6
7 NON-EMULSIFIERS NexStim FB-1100 PARAFFIN INHIBITORS NexStim PI-1108 SCALE INHIBITORS Non-emulsifier blend of non-ionic surfactants designed to minimize the emulsion tendencies between the treating fluid and downhole reservoir fluids such as crude oil. It also is also compatible with acidbased fluids. Loadings can range from 0.5 to 2.0 gpt. Solid paraffin inhibitor for use in treatment of scale deposition. Slow release mechanism provides longterm treatment of well. NexStim SI-2601 NexStim SI-4100 NexStim SI-4100W Proprietary polycarboxylate chemistry developed for cost effective management of calcium and magnesium carbonate, calcium sulfate and barium sulfate in oil and gas applications. Superior thermal resistance and iron tolerance versus traditional phosphonates. Barium sulfate and calcium carbonate scale inhibitor for oilfield waters. Based on sodium salt of diethylenetriamine penta methylene phosphonic acid (DETA). Winterized barium sulfate & calcium carbonate scale inhibitor for oilfield waters. Based on sodium salt of diethylenetriamine penta methylene phosphonic acid (DETA). Polycarboxylate Scale Inhibitor Phosphonate Blend Phosphonate Blend NexStim SI-4300 Scale inhibitor blend for mixed scale in high brine, high iron, and high TDS conditions. Tolerant at low ph. NexStim SI-4300W Winterized scale inhibitor blend for mixed scale in high brine, high iron, and high TDS conditions. Tolerant at low ph. NexStim SI-4500 High performance barium sulfate and calcium carbonate scale inhibitor blend for oilfield waters. NexStim SI-4500W NexStim SI-4600 NexStim SI-5108 Winterized high performance barium sulfate and calcium carbonate scale inhibitor blend for oilfield waters. Scale inhibitor for mixed scale in high brine, high iron, and high TDS conditions. Tolerant at low ph. Also provides excellent inhibiton for severe barium sulfate and calcium carbonate. Solid scale inhibitor for mixed scale for oilfield waters. Slow release mechanism provides long-term treatment of well. Trademark, Nexeo Solutions, or its subsidiaries, registered in various countries * Trademark owned by a third party WELL PRODUCTIVITY NexStim products are designed with the optimal well productivity in mind. Let us evaluate your frac water and formation conditions to optimize production with our unique chemistries. nexeosolutions.com
8 A NEW STANDARD OF EXCELLENCE With more than 24,000 products, we offer same day - next day service to 99% of our customers and boast a 95% on-time delivery rate using our private fleet. Ask us about our full line of Environmental Services Nexeo Solutions 3 Waterway Square Place Suite 1000 The Woodlands, TX USA To Place Your Order: P: (U.S.) F: P: (Mexico) P: (Canada-English) P: (Canada-Français) For Technical Questions: P: F: All statements, information and data presented herein by Nexeo Solutions are believed to be accurate but are not to be taken as a guarantee or other representation for which Nexeo Solutions and its affiliates and subsidiaries assume legal responsibility. NEXEO SOLUTIONS EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARISING OUT OF ANY USE OF THE PRODUCTS OR SERVICES IDENTIFIED HEREIN OR RELIANCE ON ANY INFORMATION PROVIDED HEREIN. All statements, information, recommendations and products must be thoroughly evaluated and verified by the end user to determine their applicability or suitability for each particular use. Typical values are indicative only and are not to be construed as being binding specifications Nexeo Solutions, Inc. All Rights Reserved. NEX-CH-PCI-LCRD
DISPERSANTS CATALOGUE. Bringing Value to the Surface
DISPERSANTS CATALOGUE Bringing Value to the Surface All trademarks are owned by Stepan Company. The information contained herein is based on the manufacturer s own study and the works of others and is
More informationHydraulic Fracturing Fluid Product Component Information Disclosure
Hydraulic Fracturing Fluid Product Component Information Disclosure Job Start Date: 9/12/2016 Job End Date: 9/20/2016 State: Texas County: Pecos API Number: 42-371-39413-00-00 Operator Name: Forge Energy,
More informationCORROSION INHIBITORS CATALOGUE
CORROSION INHIBITORS CATALOGUE PETROSTEP CORROSION INHIBITORS: PROTECT AND PRESERVE Corrosive agents can be found throughout the oilfield, from pipelines to production and injection wells, to storage
More informationACUSOL DETERGENT POLYMERS
ACUSOL DETERGENT POLYMERS ACUSOL 82 Rheology Modifier and Stabilizer ACUSOL 82 is a Hydrophobically modified Alkali Soluble acrylic polymer Emulsion (HASE) with unusually high aqueous thickening and stabilising
More informationFlexaTrac -NTA C H E L A T I N G A G E N T
FlexaTrac -NTA C H E L A T I N G A G E N T KEY CHARACTERISTICS Readily biodegradable Completely water soluble Effective buffering agent Deflocculating properties Stable in acids and bases Stable over a
More informationSOLUTIONS METALWORKING FLUID CHEMICALS CONNECTING YOU WITH A NETWORK OF. Toll-Free (US):
METALWORKING FLUID CHEMICALS CONNECTING YOU WITH A NETWORK OF SOLUTIONS For availability on specific products, and to place your order: Toll-Free (US): 800-531-7106 nexeosolutions.com AMINES LUBRICITY
More informationFatty acid product guide
Fatty acid product guide Kraton Corporation s Sylfat and Century fatty acids are useful in a wide range of industrial applications. These fatty acids (tall oil fatty acid, monomer acid, stearic acid and
More informationCONSUMER AND INDUSTRIAL SPECIALTIES Water Treatment Technology ROHM AND HAAS WATER TREATMENT PRODUCT SELECTION GUIDE EUROPEAN REGION
CONSUMER AND INDUSTRIAL SPECIALTIES Water Treatment Technology ROHM AND HAAS WATER TREATMENT PRODUCT SELECTION GUIDE EUROPEAN REGION product selection guide product selection guide physical and chemical
More informationACUSOL 820 Rheology Modifier/Stabilizer
Technical Data Sheet Description Applications is a Hydrophobically modified Alkali Soluble acrylic polymer Emulsion (HASE) with unusually high aqueous thickening and stabilising efficiency. When neutralized
More informationGellan Gum. Rm.1702, West Unit, No. 41, Donghai Xi Rd, Qingdao, China Post Code:
Gellan Gum Gellan gum (E418) is a bacterial exopolysaccharide, prepared commercially by aerobic submerged fermentation from Sphingomonas elodea (previously called Pseudomonas elodea), in a manner similar
More informationUNDERSTANDING YOUR WATER PROFILE PRESENTED BY POULTRY PARTNERS AND AHPD
UNDERSTANDING YOUR WATER PROFILE PRESENTED BY POULTRY PARTNERS AND AHPD WHY DOES IT MATTER? Water intake for commercial poultry breeds is 1.5-2x greater than feed intake Commercial birds drink more now
More informationچهارمین کنگره مهندسی نفت ایران. Lab Investigation of Inorganic Scale Removal Using Chelating Agents and Hydrochloric Acid Solutions.
Lab Investigation of Inorganic Scale Removal Using Chelating Agents and Hydrochloric Acid Solutions Abstract One of the most important damages to the oil and gas reservoirs, are inorganic scales resulted
More informationACULYN 22 Rheology Modifier/Stabilizer
Technical Data Sheet A very efficient thickener for difficult to thicken surfactant systems This bulletin focuses on our, a very efficient thickener for difficult to thicken surfactant systems. Our ACULYN
More informationACUMER 4161 Phosphinopolycarboxylic Acid Scale Inhibitor and Dispersant
ACUMER 4161 Phosphinopolycarboxylic Acid Scale Inhibitor and Dispersant Description ACUMER 4161 (PCA) polymer combines features of both phosphonates and polyacrylates to deliver a unique balance of threshold
More informationDextrol and Strodex Surfactant Selection Guide
Dextrol and Strodex Surfactant Selection Guide Complete solutions for coatings Dextrol and Strodex phosphate ester surfactants from Ashland Aqualon Functional Ingredients are leading technologies within
More informationNORKOOL DESITHERM Desiccant
NORKOOL DESITHERM Desiccant Introducing a New Premium Desiccant Designed to Fight Corrosion 2 Looking for a high-performance triethylene glycol (TEG) for a natural gas dehydration system? Search no further.
More informationNychem Emulsions. High Acrylonitrile. Medium Acrylonitrile. Low Acrylonitrile. Acrylonitrile Butadiene-Styrene. Specialty SB.
Nychem Emulsions High Acrylonitrile Medium Acrylonitrile Low Acrylonitrile Acrylonitrile Butadiene-Styrene Specialty SB PVC Blend Providing you with expertise and leadership in Specialty Nitrile and Butadiene
More informationEmulsions. Purpose of emulsions and of emulsification:
Pharmacist Ghada Hamid Emulsions Emulsion is a dispersion in which the dispersed phase is composed of small globules of a liquid distributed throughout a vehicle in which it is immiscible. The dispersed
More informationA Novel Sulfonated Alkyl Ester Surfactant to Reduce Oil-Water Interfacial Tensions in Wide Range Salinity with Monovalent and Divalent Ions
Modern Applied Science; Vol. 10, No. 1; 2016 ISSN 1913-1844 E-ISSN 1913-1852 Published by Canadian Center of Science and Education A Novel Sulfonated Alkyl Ester Surfactant to Reduce Oil-Water Interfacial
More informationSoil Composition. Air
Soil Composition Air Soil Included Air Approximately 40 to 60% of the volume of a soil is actually empty space between the solid particles (voids). These voids are filled with air and/or water. The air
More informationAPPLIED CHEMISTRY SURFACE TENSION, SURFACTANTS TYPES OF SURFACTANTS & THEIR USES IN TEXTILE PROCESSING
APPLIED CHEMISTRY SURFACE TENSION, SURFACTANTS TYPES OF SURFACTANTS & THEIR USES IN TEXTILE PROCESSING Lecture No. 13 & 14 2 Surface Tension This property of liquids arises from the intermolecular forces
More informationIndustrial and Institutional Cleaning
Industrial and Institutional Cleaning Food and Beverage Processing Acidic cleaning for Dairy Industry 1 Introduction 2 Test Method -upon request- 3 Test Formulation 4 Summary Introduction Cleaning In Place
More informationDISPONIL AES 60 is an emulsifier for the manufacture of finely dispersed emulsion polymers, in particular for
DISPONIL AES 60 Use DISPONIL AES 60 is an emulsifier for the manufacture of finely dispersed emulsion polymers, in particular for styrene homo and copolymers acrylate homo and copolymers. Composition Alkylaryl
More informationACUMER 4161 Phosphinopolycarboxylic Acid Scale Inhibitor and Dispersant
Technical Data Sheet ACUMER 4161 Phosphinopolycarboxylic Acid Scale Inhibitor and Dispersant Description ACUMER 4161 (PCA) polymer combines features of both phosphonates and polyacrylates to deliver a
More informationPlant Nutrients in Mineral Soils
The Supply and Availability of Plant Nutrients in Mineral Soils Plant Nutrients in Mineral Soils Factors Controlling the Growth of Higher Plants 1. Light 2. Mechanical Support. Heat. Air 5. Water 6. Nutrients
More informationIntroducing Preservation Systems From Lonza
Introducing Preservation Systems From Lonza Ramspec 13 th October 2016 Phil Clegg (EMEA) Introduction About Lonza What is Changing? MIT Free Alternatives Lonza protects your business. We are dedicated
More informationAADE-02-DFWM-HO-24. Copyright 2002 AADE Technical Conference
AADE-02-DFWM-HO-24 Invert Emulsion Drilling Fluids: Effect of Emulsifier when Changing Synthetic and Base Oil Lirio Quintero, Dennis Clapper, and Alex McKellar, Baker Hughes INTEQ Copyright 2002 AADE Technical
More informationWastewater Treatment: Reducing Salts Generated During Treatment to Promote Water Re-Use. By: David Calnan Cherokee Chemical Inc, (CCI)
Wastewater Treatment: Reducing Salts Generated During Treatment to Promote Water Re-Use By: David Calnan Cherokee Chemical Inc, (CCI) Objective Cost-effective effluent recovery utilizing chemical pre-treatment
More informationPersonal Care. Product Portfolio
Personal Care Product Portfolio Kemin Personal Care, Naturals in the Field Choosing natural ingredients for your products should be achievable without compromise. At Kemin, the relentless search for solutions
More informationEmulsion Polymerization Product Catalog
Leadership. Service. Flexibility. Success. We re going further. Emulsion Polymerization Catalog Leadership. Service. Flexibility. Success. We re going further. Charting Your Course with Innovative Chemical
More informationFertilizers. Chapter INTRODUCTION
Chapter 21 Fertilizers 1. INTRODUCTION Besides the three basic elements of carbon, hydrogen, and oxygen that are common to all plants, there are 16 other elements known to be essential to good plant growth.
More informationFACT SHEET. Understanding Cation Exchange Capacity and % Base Saturation
Understanding Cation Exchange Capacity and % Base Saturation FACT SHEET A & L CANADA LABORATORIES, INC. 2136 Jetstream Rd. London, ON N5V 3P5 Phone: 519-457-2575 Fax: 519-457-2664 Aginfo@alcanada.com www.alcanada.com
More informationSURFONIC. Performance Emulsifiers for Metalworking Fluids
SURFONIC Performance Emulsifiers for Metalworking Fluids SURFONIC Performance Emulsifiers for Metalworking Fluids Metalworking Fluids Processes such as high-speed machining create increased pressure for
More informationProduct Information Dairy
Product Information Dairy February 2010 alcaline cleaning description main ingredients calgonit R flüssig Concentrated caustic detergent, non Caustic, stabilizers foaming. Canbecombinedwithactive chlorine.
More informationACUMER 4300 Polymer. Scale Inhibitor and Dispersant for Calcium Carbonate and Calcium Sulfate Control
Technical Data Sheet Polymer Scale Inhibitor and Dispersant for Calcium Carbonate and Calcium Sulfate Control Description Benefits is a high performance scale inhibitor, specifically developed to prevent
More informationSokalan PA types. Sokalan PA 15 Sokalan PA 40. Sokalan PA 20 Sokalan PA 50. Sokalan PA 25 PN Granules Sokalan PA 80 S. Technical Information
Technical Information Sokalan PA types TI/ES 1151 e July 1992 (DFC) Supersedes TI/P 3037 e dated May 1988 Sokalan PA 13 PN Sokalan PA 30 CL Sokalan PA 15 Sokalan PA 40 Sokalan PA 20 PN Sokalan PA 40 Powder
More informationAgro Ingredients. Velcis Formulated Performance for Plant Protection
Agro Ingredients Velcis Formulated Performance for Plant Protection Lonza Agro Ingredient Products A portfolio of products designed to help optimize crop protection formulations and help farmers deliver
More informationOptimizing Surfactant Systems Thickened with Carbopol * ETD 2020 Polymer Using a Statistical Design
TECHNICAL DATA SHEET TDS-224 Edition: October 15, 27 Previous Edition: January, 22 Optimizing Surfactant Systems Thickened with Carbopol * ETD 22 Polymer Using a Statistical Design Introduction An experimental
More informationCarbopol Aqua SF-1 Polymer Technical Data Sheet
*** D R A F T *** 18 Dec 2 (Draft 6) The Specialty Chemicals Innovator TDS-294 December 2 Carbopol Aqua SF-1 Technical Data Sheet Introduction Noveon, Inc. is pleased to introduce Carbopol Aqua SF-1 polymer,
More informationNew formulas for successful drug delivery Hot-melt extrusion for enhanced solubility and bioavailability
New formulas for successful drug delivery Hot-melt extrusion for enhanced solubility and bioavailability Andreas Gryczke, an enabler in excipients Pharma Ingredients & Services. Welcome to more opportunities.
More informationUSER SPECIFICATIONS FOR QUINTOLUBRIC 888 Series DESCRIPTION OF THE MOST IMPORTANT PROPERTIES AND THE POSSIBLE VARIATIONS AND TOLERANCES
USER SPECIFICATIONS FOR QUINTOLUBRIC 888 Series OVERVIEW The QUINTOLUBRIC 888 Series of fluids are based on a synthetic organic ester, which is the main base component, plus a number of selected additives
More informationRobust Microbial Protection Amidst Increasing Regulatory Challenge
Industrial Pharma&Biotech MicrobialControl Solutions 2015 Lonza Robust Microbial Protection Amidst Increasing Regulatory Challenge ASEFAPI 5 th November 2015 Phil Clegg, Lonza (Europe, Middle East and
More informationSoils and Soil Fertility Management
Soils and Soil Fertility Management Mark L. McFarland Professor and Soil Fertility Specialist Texas A&M AgriLife Extension Service College Station, Texas Four Principal Components of Soil Air Mineral Solid
More informationIsethionate Surfactant Iselux
Isethionate Surfactant Iselux INCI Name: Sodium Lauroyl Methyl Isethionate CAS N o : 928663-45-0 REACH N o 01-2119401252-59-0000 EINECS N o 700-150-3 \ Iselux is our latest technological breakthrough in
More informationFACTORS AFFECTING WATER QUALITY
TECHNICAL PAPER WATER QUALITY PLANT HEALTH FACTORS Water quality is one of the most important factors affecting plant growth, as unwanted components in water can interfere with nutrient availability and
More informationDefoaming Surfactants
TERGITOL L Series Biodegradable Surfactants TERGITOL L-61 E, L-62 E, L-64 E, L-81 E Defoaming Surfactants Trademark of The Dow Chemical Company ( Dow ) or an affiliated company of Dow. These surfactants
More informationACULYN 28 Rheology Modifier/Stabilizer
Technical Data Sheet A very efficient thickener for a wide array of Personal Care formulations. This bulletin focuses on our, a very efficient thickener for a wide array of personal care formulations.
More informationSelected Water Quality Topics Related to Larval Shrimp Culture
Selected Water Quality Topics Related to Larval Shrimp Culture Claude E. Boyd Professor Emeritus School of Fisheries, Aquaculture and Aquatic Sciences Auburn University, Alabama 36849 USA Chlorination
More informationChemical Name: Complex Chloride Sodium Chloride, Potassium Chloride, Magnesium Chloride, Calcium Chloride
1. PRODUCT AND COMPANY IDENTIFICATION Product Identity: MeltDown Near Zero Chemical Name: Complex Chloride Sodium Chloride, Potassium Chloride, Magnesium Chloride, Calcium Chloride Recommended use of the
More informationSalts and Chlorides Remediation
Salts and Chlorides Remediation The remediation of salts and chlorides is not a process of consumption but rather a process of binding, buffering, immobilization, detoxification, filtering, or conversion
More informationProduct Focus Customer Commitment Performance Flexibility
NAXCAT Acid Catalysts Product Focus Customer Commitment Performance Flexibility The Industry Leader for the Dependable Quality Difference Cost Effective Solutions-When Quality Counts NEASE Co manufactures
More informationClariant Mining Emulsifiers for Explosives
Clariant Mining Emulsifiers for Explosives Clariant s Solutions Clariant Mining offers customers high performance, tailor-made products that include synergistic blends and ready-to-use fuel phase solutions.
More informationCLiQSPERSE. CLiQFLOW. CLiQSMART
CLiQSPERSE CLiQFLOW CLiQSMART Product Overview Additives - 2018 CLiQSPERSE wetting and dispersing agents for non-aqueous CLiQSPERSE Product Chemistry Active Content Solvents / Diluents BA polymeric resin-like
More informationTypical Properties Bulletin Complete ion exchange resins and regeneration services
Typical Properties Bulletin Complete ion exchange resins and regeneration services Ion Exchange Resin Typical Properties Cation Exchange Resins PRODUCT TYPE IONIC APPROX. SCREEN WATER TOTAL MAXIMUM VOLUME
More informationDownloaded from
Question 16.1: Why do we need to classify drugs in different ways? The classification of drugs and the reasons for classification are as follows: (i) On the basis of pharmacological effect: This classification
More information0620 CHEMISTRY. 0620/23 Paper 2 (Core Theory), maximum raw mark 80
CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education MARK SCHEME for the May/June 2014 series 0620 CHEMISTRY 0620/23 Paper 2 (Core Theory), maximum raw mark 80
More informationTechnical Information
TM TECHNICAL DATA SHEET Flexisorb OD-100 Chelate and Stabilizer-free Zinc salt dispersion Overview Concentrated zinc salt dispersion readily dilutes in water to a neutral ph Chelate and Stabilizer free,
More informationSoil Fertility and Nutrient Management. Hailin Zhang. Department of Plant and Soil Sciences
Soil Fertility and Nutrient Management Hailin Zhang Department of Plant and Soil Sciences C H O P N K 16 ESSENTIAL ELEMENTS Ca S Mg B Cl Cu Fe Mn Mo B NON-MINERAL NUTRIENTS Carbon (C) Hydrogen (H) Oxygen
More informationTo study the effect that hydroxypropylcellulose (HPC) polymer molecular weight (MW) exerts on drug release rates and mechanism from matrix tablets.
PHARMACEUTICAL TECHNOLOGY REPORT Consumer Specialties ashland.com PTR-029-1 (Supersedes PTR 029) Page 1 of 7 Hydroxypropylcellulose in Modified Release Matrix Systems: Polymer Molecular Weight Controls
More informationHydrodynamic Robustness of Hypromellose and Methylcellulose Based Modified Release Matrix Systems D. Tewari, R. K. Lewis, W. W. Harcum and T Dürig
PHARMACEUTICAL TECHNOLOGY REPORT Consumer Specialties ashland.com PTR-069-1 (Supersedes PTR-069) Page 1 of 8 Hydrodynamic Robustness of Hypromellose and Methylcellulose Based Modified Release Matrix Systems
More informationCatalog
Foliar Nutrition, Biostimulants, Specialty Chemicals, Wetting Agents & Surfactants, Contract Packaging, and Contract Formulating WWW.CUSTOMAGRONOMICS.COM 2013 Catalog Stock Liquid Fertilizers 30-0-0 (60%
More informationCLiQSPERSE. CLiQFLOW. CLiQSMART
CLiQSPERSE CLiQFLOW CLiQSMART Product Overview Additives - 2017 CLiQSPERSE wetting and dispersing agents for non-aqueous CLiQSPERSE Product Chemistry Active Content Solvents / Diluents BA polymeric resin-like
More informationCreating Minimally Disruptive Formulations for Rapid Development
Creating Minimally Disruptive Formulations for Rapid Development Belinda Carli Director, Institute of Personal Care Science Overview What are Minimally Disruptive Formulations? Creating Minimally Disruptive
More informationUnderstanding ph management and plant nutrition Part 3: Fertilizers
Understanding ph management and plant nutrition Part 3: Fertilizers Bill Argo, Ph.D. Blackmore Company, Tel: 800-874-8660, Intl 734-483-8661, E-mail: bargo@blackmoreco.com Originally printed in 2003 in
More informationUNISHAPES MACROSCOPIC PELLETS OF DIFFERENT FORMS AND COLORS FOR COSMETIC PRODUCTS
MACROSCOPIC PELLETS OF DIFFERENT FORMS AND COLORS FOR COSMETIC PRODUCTS Characterization Unishapes are dry pellets in different forms that consist of Mannitol and micro-crystalline Cellulose. They are
More informationSAFETY DATA SHEET Clinell Antibacterial Hand Wipes According to Regulation (EU) No 453/2010
SECTION 1: Identification of the substance/mixture and company/undertaking 1.1 Product Identifier Product Name 1.2 Relevant identified uses of the substance or mixture and uses advised against Identified
More informationTransformer fluid options and condition monitoring STLE Toronto Section September 2016
Transformer fluid options and condition monitoring STLE Toronto Section September 2016 Products of M&I Materials Ltd. Topics Covered Transformer Fluid classes & Options Comparison of Fluid Properties Fire
More informationTNPSC Chemistry Study Material Fertilizers
TNPSC Chemistry Study Material A fertilizer is any material of natural or synthetic origin (other than liming materials) that is applied to soils or to plant tissues to supply one or more plant nutrients
More informationDiscuss the importance of healthy soils Soil properties, physical, chemical and biological that one can manage for soil health How organics play a
Andrew Ristvey The University of Maryland Extension programs are open to any person and will not discriminate against anyone because of race, age, sex, color, sexual orientation, physical or mental disability,
More informationPotted Colour Blend (Staged Nutrient Release)
Potted Colour Blend (Staged Nutrient Release) N15.2 P4.9 K9.3 Release Period 60 days ADVANCED COATING TECHNOLOGY CONSISTENT NUTRIENT RELEASE What is it? Yates Nutricote Potted Colour Blend is a blend of
More informationPHARMACEUTICAL TECHNOLOGY REPORT. Abstract Summary. Introduction. Experimental Methods. Consumer Specialties ashland.com
PHARMACEUTICAL TECHNOLOGY REPORT Consumer Specialties ashland.com PTR-037-3 (Supersedes PTR-037-2) Page 1 of 7 Hydrodynamic Robustness of Hypromellose and Hydroxypropyl Cellulose Based Modified Release
More informationNutrient level (EC) in a pot is like a bank
Dirt, Fert and Squirt (1) Supplying Essential Nutrients What are the most common nutritional problems? Too much fertilizer Not enough fertilizer Paul Fisher pfisher@ufl.edu 1 ph too high ph too low 2 Nutrient
More informationURINAL PLUS 10X. A fully formulated, microbial based, neutral ph hard surface cleaner, containing odor counteractant technology
PRODUCT DESCRIPTION: URINAL PLUS 10X A fully formulated, microbial based, neutral ph hard surface cleaner, containing odor counteractant technology Chemtech s biologically active formulas have been used
More informationPUTTING ON PAPER. Dow Paper Coatings
PUTTING ON PAPER Dow Paper Coatings www.dow.com/papercoatings Dow Paper Coatings offers access to a broad portfolio of technologies and chemistries for coated paperboard, SBS paperboard, coated freesheet,
More informationFlocon 885. Biodegradable Antiscalant for Reverse Osmosis
Flocon 885 Biodegradable Antiscalant for Reverse Osmosis Flocon 885 General information Flocon 885 isa unique, biodegradable& Phosphorusfree antiscalant for Reverse Osmosis systems Based on Polycarboxylic
More informationNovel Ingredient Solutions for Removing Weighting Agents
Novel Ingredient Solutions for Removing Weighting Agents Afaf Makarious Global Technical Lead for Beverage Emulsion Applications Ingredion Incorporated Bridgewater, New Jersey Novel Ingredient Solutions
More informationEffect of Surfactants and Adjuvants on Postemergence Herbicide Efficacy
Effect of Surfactants and Adjuvants on Postemergence Herbicide Efficacy Dr. William B. McCloskey Cooperative Extension Weed Specialist Department of Plant Sciences University of Arizona Herbicide Uptake
More informationAdvanced Chemical Concepts. Inc. Additives. For Metalworking. And Industrial Lubricants. Building Win / Win Long Term Sustainable Relationship
Advanced Chemical Concepts. Inc. Additives For Metalworking And Industrial Lubricants Building Win / Win Long Term Sustainable Relationship INTRODUCTION At Advanced Chemical Concepts, Inc., we believe
More informationCleanGredients Product Guide. For Safer Choice Formulations
CleanGredients Product Guide For Safer Choice Formulations Dehypound Advanced Blend of Nonionic Surfactants Powerful cleaning without solvent Superior greasy soil removal Ready-to-use (only dilution needed)
More informationProduct Guide.
PLASTICS & composites DISPERSANTS FOR PLASTICS Product Guide www.lubrizol.com/plastics Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus and Solsperse hyperdispersants and
More informationSoil organic matter composition, decomposition, mineralization and immobilization
Soil organic matter composition, decomposition, mineralization and immobilization SOIL ORGANIC MATTER Substances containing carbon are organic matter. Soil organic matter consists of decomposing plant
More informationDetermination of Inorganic Ions and Organic Acids in Non-Alcoholic Carbonated Beverages
Application Note Determination of Inorganic Ions and Organic Acids in Non-Alcoholic Carbonated Beverages INTRODUCTION The determination of inorganic anions and cations and organic acids in non-alcoholic
More informationExtraction and Characterization of Galactomannan from Guar Seeds
TEXAS TECH UNIVERSITY Extraction and Characterization of Galactomannan from Guar Seeds Noureddine Abidi, PhD. noureddine.abidi@ttu.edu Managing Director and Associate Professor Fiber and Biopolymer Research
More informationThe Chemistry and Use of 1,2-Alkanediols and Anti-oxidants for Product Protection
The Chemistry and Use of 1,2-Alkanediols and Anti-oxidants for Product Protection Ravi Pillai PAGE 1 1,2-ALKANEDIOLS CHEMISTRY Straight chain with two vicinal hydroxy groups CH 2 - CH - (CH 2 ) n - CH
More informationENVE 424 Anaerobic Treatment
ENVE 424 Anaerobic Treatment Lecture 6 Toxic substances in anaerobic treatment 2012 2013 Fall 01 Nov 2012 Assist. Prof. A. Evren Tugtas Basic Fundamentals Inhibition Competitive Inhibition Uncompetitive
More informationBase fluids and additives for Fire-resistant Hydraulic Fluids
Base fluids and additives for Fire-resistant Hydraulic Fluids Base fluids and additives for fire-resistant Hydraulic Fluids Clariant is one of the leading suppliers of high-performance components and additives
More informationProduct Safety Assessment DOW Borohydride Bleaching Products
Product Safety Assessment DOW Borohydride Bleaching Products Product Safety Assessment documents are available at www.dow.com/productsafety/finder/. Select a Topic: Names Product Overview Manufacture of
More informationDispersants and Additives. for Coatings and Ink Applications
Dispersants and Additives for Coatings and Ink Applications Pigment Dispersants & Wetting Agents HUNTSMAN amines and surfactants make it easier to create high performance coatings & inks. Our pigment
More informationFood Solutions. Solutions Designed for Meat Products
Food Solutions Solutions Designed for Meat Products Dow Food Solutions offers a broad range of ingredients for the meat market. Our ingredients help improve the texture, bite and succulence of meat products
More informationEH1008 Biomolecules. Inorganic & Organic Chemistry. Water. Lecture 2: Inorganic and organic chemistry.
EH1008 Biomolecules Lecture 2: Inorganic and organic chemistry limian.zheng@ucc.ie 1 Inorganic & Organic Chemistry Inorganic Chemistry: generally, substances that do not contain carbon Inorganic molecules:
More informationStandard Pink (Zero P for sensitive natives)*
Standard Pink (Zero P for sensitive natives)* N19.1 P0.0* K11.9 Release Period 180 days ADVANCED COATING TECHNOLOGY CONSISTENT NUTRIENT RELEASE What is it? Yates Nutricote Standard Pink is a controlled
More informationLECTURE 10. PACKAGING TECHNOLOGY
LECTURE 10. PACKAGING TECHNOLOGY The increasing demand for fresh and quality packaged food, consumer convenience and manufacturers concern for longer shelf life of the food products is driving the market
More informationProduct Information Antioxidants and Actives: dermofeel enlight
Product Information Antioxidants and Actives: dermofeel enlight Product features: - Effective whitening blend - In vivo proven activity - Age spot correction - Skin tone harmonization - 100% naturally
More informationWelcome. Greg Patterson C.C.A. President A&L Canada Laboratories
Welcome Greg Patterson C.C.A. President A&L Canada Laboratories Discussion Soil test levels Dropping P,K Organic matter levels dropping Cost of Fertilizer Increasing due to Global Demand Environmental
More informationSP Technical Research Institute of Sweden
SP Technical Research Institute of Sweden 10:45 Kemi Hur fungerar egentligen de olika kemikalierna i rengöringsmedel? Mikael Kjellin från SP och Anders Karlsson, NVADAN Important parameters for Cleaning
More informationZurn Chemical Resistance Information Flo-Thru Drainage Systems
Chart below shows chemical resistance of polyester and vinylester to select chemicals. For a more complete list or for other chemicals, contact your Zurn Sales Representative. Zurn Chemical Resistance
More information60 8 weeks = 25 2 year weeks = 25 2 year
Formula Book Copyright 2013 by SUNJIN Chemical Co. LTD ALL RIGHTS RESERVED. 2 Formula stability Check 2 Year Shelf Life at Room Temperature should be examined...but it s too long! Something faster test
More informationGlydant Plus Liquid (patented) Broad Spectrum Product Protection
Personal Care Consumer Care Glydant Plus Liquid (patented) Broad Spectrum Product Protection INCI Name: DMDM Hydantoin & Iodopropynyl Butylcarbanate (IPBC) Key Product Attributes: Highly cost-effective
More informationMethane. Improving. Digesters. Dairy Market. Livestock Waterers. The International. Product Review. Potassium Supplementation
Improving Potassium Supplementation The International Dairy Market Livestock Waterers Product Review Methane Digesters Waste Not - Want Not See the informative article inside that can help you turn your
More informationGlobal Oilfield Solutions. Demulsifiers for the Oil Industry: Basorol
Demulsifiers for the Oil Industry: Basorol The most important objective of any oil production facility is the separation of water from produced crude. The quick and efficient breaking of these emulsions
More information