Current Sensing Chip Resistors
|
|
- Mitchell Murphy
- 5 years ago
- Views:
Transcription
1 FETURES SURFE MOUNTLE 106, 010 ND 51 SE SIZE LO RESISTNE & LO INDUTNE METL STRI ONSTRUTION REISON TOLERNE (±1%) ND (±50M) TO +170 TED & REEL KGING FOR ESY IK ND LE REFLO OMTILE SEIFITIONS EI ower Rating at 80 ** (ode) Temperature oefficient (ppm/ ) Range Operating Temperature Range ( ) NSR100S att 3 0.5mΩ ~ 10mΩ NSR att 3 ±50 (D)* 0.5mΩ ~ 10mΩ NSR100 1 att 1 & ±75 * 0.5mΩ ~ 15mΩ ±100 (E)* NSR00 att 1 & 0.5mΩ ~ 10mΩ 51 ±150 (K)* NSR50.5 att ±00 (F)* 4.0mΩ ~ 6.0mΩ NSR300 3 att 1 & 0.5mΩ ~ 3.0mΩ -55 ~ +170 *See Tables for Value/, ** See Tables for ENVIRONMENTL HRTERISTIS Item Specification 1 3 Test Method Temperature oefficient of s Specified MIL-STD-0, Method /-55/+5/+15/+5 Thermal Shock ±0.5% ±1% ±1% MIL-STD-0, Mehtod 107G -55 ~ +150, 100 cycles Short Time Overload ±0.5% ±1% ±1% JIS x rated power for 5 seconds to dry heat ±1% ±1% ±1% JIS without load Load Life ±1% ±1% ±1% MIL-STD-0 Method , cycles of 1.5 hours on, 0.5 hrs off for 1,000 ~ 1,048 hrs to Soldering Heat ±0.5% ±1% ±1% MIL-STD-0F Method 10E 60 ±5 for 10 sec. ±1 sec. Solderability 95% min. coverage MIL-STD-0F Method 08H 45 ±5 for 5 sec. ±0.5 sec. MXIMUM OERTING URRENT: 1 Sn Solder lating u lating lloy lating rotective oating (lack) rotective oating (Green) Metal Strip Sn Solder lating 3 No Top oating Metal Strip Sn Solder lating I (mps) (atts)/r (Ohms) RoHS ompliant includes all homogeneous materials See System for Details ower Derating urve: For operation above 70, power rating must be derated according to the following chart: ercentage of ower Rating Temperature THERML EMF EI ower Thermal Rating Value EMF NSR100S att 3 0.5m ~ 3m -1 μv/ 3.5m ~ 10m -6 μv/ NSR att 3 0.5m ~ 3m -1 μv/ 3.5m ~ 10m -6 μv/ 0.5m ~ m -1 μv/ 1 NSR100 1 att.5m ~ 7m +4 μv/ 10m ~ 15m +1 μv/ NSR m ~ m -1 μv/ att m ~ 10m -6 μv/ NSR50.5 att 4m ~ 6m -6 μv/ 1 0.5m ~ m -1 μv/ NSR300 3 att 0.5m ~ 3m -1 μv/ 3.5m ~ 10m -6 μv/ 1
2 NSR100S (1 TT, 106 SE SIZE) VILLE VLUES NSR100S*M50FTRT3F 0.5 NSR100S*M75DTRT3F 0.75 ±00ppm (F) 1.35 ± ± 0.5 NSR100S*R001DTRT3F ±0.5 NSR100S*R00DTRT3F ±0.5 NSR100S*R003DTRT3F ±0.5 NSR100S*R004DTRT3F ± ± ± ± 0.0 NSR100S*R005DTRT3F 5.0 ±50ppm (D) 1.10 ±0.5 NSR100S*R006DTRT3F ±0.5 NSR100S*R007DTRT3F ±0.5 NSR100S*R008DTRT3F ±0.5 NSR100S*R009DTRT3F ±0.5 NSR100S*R010DTRT3F ±0.5, ontact NI regarding availability of other values NSR100 (1 TT, 51 SE SIZE) VILLE VLUES NSR100*M50DTRF ± 0.0 NSR100*M75DTRF ± 0.0 NSR100*R001DTRF 1.0 ±50ppm (D) 0.65 ± 0.0 NSR100*1M50DTRF ± 0.0 NSR100*R00DTRF ± 0.0 NSR100*M50KTRF ± 0.0 ±150ppm (K) NSR100*R003KTRF ± ± ± 0.0 NSR100*R004ETRF ± 0.0 ±100ppm (E) NSR100*R005ETRF ± 0.0 NSR100*R006TRF ± 0.0 NSR100*6M50TRF 6.5 ±75ppm 0.30 ± 0.0 NSR100*R007TRF ± 0.0 NSR100*R010ETRF 10 ±100ppm (E) 0.5 ± ±0.38 1
3 NSR150 (1.5 TT, 010 SE SIZE) VILLE VLUES NSR150*M50ETRT3F 0.50 NSR150*M75DTRT3F 0.75 ±100ppm (E).17 ± ± 0.5 NSR150*R001DTRT3F ± 0.5 NSR150*R00DTRT3F ± 0.5 NSR150*R003DTRT3F ± 0.5 NSR150*R004DTRT3F ± ± ± ±0.0 NSR150*R005DTRT3F 5.0 ±50ppm (D) 1.84 ± 0.5 NSR150*R006DTRT3F ± 0.5 NSR150*R007DTRT3F ± 0.5 NSR150*R008DTRT3F ± 0.5 NSR150*R009DTRT3F ± 0.5 NSR150*R010DTRT3F ± NSR00 ( TT, 51 SE SIZE) VILLE VLUES NSR00*M50DTRF ± 0.0 NSR00*M75DTRF ± 0.0 NSR00*R001DTRF ± ± ± 0.0 NSR00*1M50DTRF ± 0.0 NSR00*R00DTRF ± 0.0 ±50ppm (D) NSR00*6M50DTRGF 6.5 NSR00*R007DTRGF 7.0 NSR00*R008DTRGF 8.0 NSR00*R009DTRGF 9.0 NSR00*R010DTRGF ± ± ± ± ± ± 0.5 NSR50 (.5 TT, 51 SE SIZE) VILLE VLUES NSR50*R004DTRGF 4.0 NSR50*4M50DTRGF 4.5 NSR50*R005DTRGF 5.0 NSR50*R006DTRGF 6.0 ±50ppm (D) 6.35 ± ± ± ± ±0.5 3
4 NSR300 (3 TT, 51 SE SIZE) TYE 1 LK OTING VILLE VLUES NSR300*M50DTRF ± ±0.38 NSR300*M75DTRF ± ±0.38 NSR300*R001DTRF 1.0 ±50ppm (D) 6.35 ± ± ± ±0.38 NSR300*1M50DTRF ± ±0.38 NSR300*R00DTRF ± ± NSR300 (3 TT, 51 SE SIZE) TYE GREEN OTING VILLE VLUES NSR300*M50ETRGF ±0.5 ±100ppm (E) NSR300*M75ETRGF ±0.5 NSR300*R001DTRGF NSR300*1M50DTRGF ± ± ± ± ±0.5 NSR300*R00DTRGF.0 ±50ppm (D) NSR300*M50DTRGF.5 NSR300*R003DTRGF ± 0.5 TYE 1 L TYE (Green Top oating & Value Marking) L TYE 3 (ithout Green Top oating & No Marking) L R007 R007 T T T RT NUMER SYSTEM NSR 100 S F R00 D TR T3 F Series RoHS compliant (lank = 1, G =, T3 = 3) ackaging: TR = Tape & Reel ode: D=50ppm, =75ppm E=100ppm, K=150ppm ode: See Values Tables ode: J=5%, H=3%, F=1% ode (S = Reduced, lank = Standard) ower Rating (100 = 1, 150 = 1.5, 00 =, 50 =.5 and 300 = 3) 4
5 106 TYE 3 ITH NO OTING NSR100S -IRE LND TTERN DIM. (mm) 0M M R R00~R R004~R R007~R R TYE 3 ITH NO OTING NSR150 -IRE LND TTERN DIM. (mm) 0M M R R R R004~R R006~R R009~R TYE 3 ITH NO OTING NSR100S 4-IRE LND TTERN DIM. (mm) D 0M M R R00~R R004~R R007~R R TYE 3 ITH NO OTING NSR150 4-IRE LND TTERN DIM. (mm) D 0M M R R R R004~R R006~R R009~R D 5
6 51 TYE 1 ITH LK OTING -IRE LND TTERN DIM. (mm) TYE ITH GREEN OTING -IRE LND TTERN DIM. (mm) 0M M R M R00~R R004~4M R005~R M50~R R008~R TYE 1 ITH LK OTING 4-IRE LND TTERN DIM. (mm) Recommended for precision current sensing D TYE ITH GREEN OTING 4-IRE LND TTERN DIM. (mm) Recommended for precision current sensing D 0M M R M R00~R R004~4M R005~R M50~R R008~R D REOMMENDED REFLO SOLDERING TEMERTURE ROFILE eak: /10 Sec Ramp up 3 /Sec. ool down 6 /Sec. 150 re-heating Max. 0 Sec. 90~10 Sec. Max. 60 Sec. Number of reflow cycles allowed: 3 times 6
7 TE DIMENSIONS (mm) K Values 1 1 E F D ll.0 ± ± ±0.1 n/a 4.0 ± ± ± ± / ± ll.85 ± ±0.1 n/a 0.85 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±0.3 1 ~ 3.40 ± ± ± ± ± ± ± ± ±0.3 Quantity per Reel,000 EMOSSED LSTI RRIER D 0 E D 1 F K 1 Notice: 1. The cumulative tolerance of 10 sprocket hole pitch is ±0.mm.. arrier camber shall be not more than 1mm per 100mm through a length of 50mm. 3. & measured 0.3mm from the bottom of the packet 4. K measured at a point on the inside bottom of the packet to the top surface of the carrier. 5. ocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole. 7
Current Sensing Chip Resistors
FEURES SURFCE MOUNE 106, 010 ND 51 CSE SIZE O RESISNCE & O INDUCNCE ME SRI CONSRUCION RECISON OERNCE (±1%) ND (±50M) O +170 C ED & REE CKGING FOR ESY ICK ND CE REFO COMIE SECIFICIONS EI ower Rating at
More informationChip Resistors WR 06 X 1000 F T L WW 25 M R002 F T L
How to Order R 06 1000 L ype code Size code unctional code Resistance olerance Packaging code ermination code R : iscrete 1~10MR 25 : 2512 (6432) : Normal 24 : 2 significant digits : +/- 1% : 7" reel taping
More information+145 C 4.0 ± ± ± ± 0.2. Temperature C
FEATURES SHIELDED POWER INDUCTOR RoHS CURRENT RATINGS UP TO 5.0 AMPS Compliant SURFACE MOUNTABLE CONSTRUCTION includes all homogeneous materials LOW PROFILE (3.2mm ~ 4.9mm MAXIMUM HEIGHT) TAPED AND REELED
More informationTSH Series, 2 Watt. 12 VDC 165 ma 82 % TSH 1212D ±12 VDC ±80 ma 82 % TSH 1215D ±15 VDC ±65 ma 82 % TSH 2405S 5 VDC 400 ma 78 % TSH 2412S 24 VDC ±10%
TSH Series, 2 Watt Features Ultra compact SMD package (SOIC-14/18) Isolated single and dual output models I/O isolation 1 000 VDC High efficiency up to 82% Operating temperature 40 C to +85 C Reflow solder
More informationBase S D T B
SD-00/000 RoHS compliant INTERNAL STRUCTURE SD-00 / 000 series 3 6 7 5 FEATURES RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
More informationApplications F5B H C 4100 DQ A 7 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)
F5B Series Metallized Polyester Film with Integrated Suppression Diode 18 63 VDC Overview The F5B Series is a metallized polyester (MKT) film capacitor with an integrated suppression diode encapsulated
More information3M Four Wall Header.100 x.100 Low Profile, SMT Straight, Straight and Rt Angle Through-Hole D2500 Series
M Four Wall Header x Low Profile, SMT Straight, Straight and Rt ngle Through-Hole D2500 Series Low profile, space saving design Center slot polarization designed to prevent misinsertions and reduce insertion
More informationOptocoupler, Phototransistor Output (Dual, Quad Channel)
Optocoupler, Phototransistor Output (Dual, Quad hannel) Dual hannel 2 8 7 E FETURES urrent transfer ratio at I F = m 3 4 6 5 E 6 E Isolation test voltage, 5300 V RMS ompliant to RoHS Directive 2002/95/E
More informationSurface Mountable PTC Resettable Fuse: FSMD Series
Product Specification and Approval Sheet Version D4 Page 1/6 Surface Mountable PTC Resettable use: SMD Series 1. Summary (a) RoHS Compliant & Halogen ree (b) Applications: All high-density boards (c) Product
More informationPower Splitter/Combiner
Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 0.5W max. Internal Dissipation
More informationBMA 85 SERIES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
BMA 85 SERIES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MECHANICAL MATERIALS: Bodies: Stainless Steel Per ASTM-A-582 Contacts: Beryllium Copper Per ASTM-B-196 Insulators: Teflon (PTFE) Per ASTM-D-1457
More informationMultilayer Ceramic Chip Capacitors
FEAURES X7R, X5R AN Y5V IEECRICS HIGH CAACIANCE ENSIY URA O ESR & ES EXCEEN MECHANICA SRENGH NICKE BARRIER ERMINAIONS RoHS COMIAN SAC SOER COMAIBE* RoHS Compliant Includes all homogeneous materials *See
More informationEye Of SOLDERLESS INTERCONNECT TECHNOLOGY GUIDELINE. the Needle
EON Pressfit Eye Of SOLDERLESS INTERCONNECT TECHNOLOGY the Needle GUIDELINE >> Pressfit insertion machine c In some applications, the insertion of single pins replaces molded or overmolded connectors to
More information3M Legal Information Privacy Policy
Insulation Resistance >1 X 10^9 Ohms @ 500 Vdc Interface Grid " x " Interface Style Header (Rectangular Plug) Latch/Ejector Type None Markings 3M Logo and Orientation Triangle Mounting Option None Non-Operating
More informationMetallized Polyester PCMT 468 film capacitors
MKT RADIAL POTTED APAITORS Pitch 10.0/15.0/22.5/27.5mm (reduced pitch ; 7.5mm) QUIK REFERENE DATA apacitance range (E24 series) apacitance tolerance Rated voltage (D) limatic category Temperature range
More informationHigh Current Inductor
Product Catalog: High Current Inductor Picture Series Code Size-Range(mm) Inductance Isat1 Isat2 Irms DCR(mΩ) Page (W*L*H) Max. (at 25 ) (at 125 ) (at 20 ) The product structure, performance and application
More informationFERROXCUBE. Multilayer suppressors EMI-suppression products. Supersedes data of February Sep 01
FERROXCUBE DATA SHEET Supersedes data of February 2002 2004 Sep 01 MULTILAYER SUPPRESSORS are a powerful solution for EMI/RFI attenuation for electronic equipment. Supplied in seven standard sizes (0402,
More informationApproval Sheet. for. Metal Oxide Film Resistors. RSF series 2% & 5% YAGEO CORPORATION
Approval Sheet for Metal Oxide Film Resistors RSF series 2% & 5% YAGEO CORPORATION Headquarters: 3F, No.233-1, Pao Chiao Rd., Hsin Tien, Taipei, Taiwan, R.O.C. Tel: 886-2-2917-7555 Fax: 886-2-2917-4286
More informationHER103, HER107 Power Diodes - Fast Recovery
High Efficiency DO-41 Features: Fast reverse recovery time, t rr. Low forward voltage drop, V F. Low cost axial packages. High current capability. High reliability. High surge current capability. Mechanical
More informationCree Screen Master. 4-mm Oval LED C4SMK-RJS/GJS/BJS C4SMJ-RJS Data Sheet
Data Sheet: CLD-CT1114. Cree Screen Master 4-mm Oval LED C4SMK-RJS/GJS/BJS C4SMJ-RJS Data Sheet This oval LED is specifically designed for full color video screens, variablemessage signs and passenger-information
More informationSurge Withstanding Chip Resistor. RCS Series. Features. Applications. Constructions
Surge Withstanding Chip Resistor Surge Withstanding Chip Resistor Features High power rating Excellent surge withstanding & pulse withstanding performance Improved working voltage ratings Standard package
More informationNPG-151. Characteristics Unit Conditioning Typical Values SPEC Test Method. Volume resistivity MΩ-cm C-96/35/ x
New: 2018/03/14 Glass cloth base epoxy resin Flame retardant copper clad laminate NPG-151 FEATURES Halogen, antimony, and red phosphorous free Flammability meets UL 94 V-0 Excellent thermal resistance
More informationData Sheet of SAW Components
Data Sheet of SAW Components Note : Murata SAW Component is applicable for Cellular /Cordless phone (Terminal) relevant market only. Please also read caution at the end of this document. 5-0.325±0.050
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationSpecification for white LED
Specification for white LED Ergon COB 2530 62W maximum power capability High brightness LED Dimension : 23.85 x 23.85 x 2.35 mm Precondition : JEDEC Level 2a Lead-free reflow soldering application RoHS
More informationInput Load (ma) Typ.
1. Features Wide 2 : 1 Input Range Low Ripple And Noise Input / Output Isolation 1.5K Vdc Or K Vdc 100% Burn-In Input - Filter Custom Design Available Net Weight : 12 g / g Typical RoHS Converter Certified
More informationSep2018 Rev B1
Product Specification 12Sep2018 Rev B1 HD30 Series Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) HD30 Series
More informationTECHNICAL CHARACTERISTICS BEHAVIOUR WITH CHEMICAL AND ATMOSPHERIC AGENTS
LE GLNS able glands and plastic accessories Regulatory ompliance: able Glands: EN 50262; IE 62444 Metric pitch: IE/EN 60243 PG pitch: IN 40430 ouplings and cable glands: EN 61386-1 e EN 60670-1 as applicable
More informationIsometric view Scale 3:1. Scale 1:1. QTR sensor
. 00... 0.0.. 00 0 0 rofile QT sensor.... Intended for # and M screws. Grid lines indicate. mm [00 mil] spacing. Drill location tolerance: ±0. [±]. oard edge tolerance: ±0. [±0]. https://www.pololu.com/category/
More informationPb-Free/RoHS Solutions
Pb-Free/RoHS Solutions Environmental Policy: Exar Corporation is committed to protecting the environment and individual health and safety. We shall comply with all environmental regulations, health and
More informationData Sheet of SAW Components
Data Sheet of SAW Components Note : Murata SAW Component is applicable for Cellular /Cordless phone (Terminal) relevant market only. Please also read caution at the end of this document. Package Dimensions
More informationFill the Void. Tony Lentz Greg Smith
Fill the Void Tony Lentz tlentz@fctassembly.com Greg Smith gsmith@fctassembly.com Outline/Agenda Introduction Factors that Influence Voiding Voiding Results What Have We Learned About Voiding? Future Work
More informationData Sheet of SAW Components
Data Sheet of SAW Components Note : Murata SAW Component is applicable for Cellular /Cordless phone (Terminal) relevant market only. Please also read caution at the end of this document. Package Dimensions
More informationSS CLASS BUSHED STEEL CHAIN ATTACHMENTS
A1 NO. PITCH A B C DIAMETER DIAMETER E G H T LBS. SS 131-A1 3.075 2.06 1.54 1.00 0.50 0.56 2.50 2.78 2.69 0.38 8.9 MOLINE D D1 WEIGHT BOLT HOLE BOLT HOLE PER FT. NO. PITCH A B C DIA. DIA. DIA. DIA. E F
More informationData Sheet of SAW Components
Data Sheet of SAW Components Note : Murata SAW Component is applicable for Cellular /Cordless phone (Terminal) relevant market only. Please also read caution at the end of this document. Package Dimensions
More informationNASA Space-Qualified Thermistors
NASA Space-Qualified Thermistors YSI 44900 Series Goddard Space Flight Center GSFC S-3-P-8 NASA has qualified YSI epoxy-encapsulated thermistors for use in extended space flight. The Goddard Space Flight
More informationFortimo LED Square. Datasheet
LED Square 380 mm 5000 lm HV1 Datasheet Fortimo LED Square Fortimo LED Square systems consist of white light LED modules with square outer dimensions delivering high energy efficiency and high quality
More informationAssembly Instruction for Fiber Optic Series FOH Fischer Connectors
Assembly Instruction for Fiber Optic Series FOH Fischer Connectors Table des matières 1 Introduction... 3 2 Document history... 3 3 Definitions and Acronyms... 3 4 FOH Plugs & Receptacles with Potting
More informationTroubleshooting SMT Solder Paste Problems
Troubleshooting SMT Solder Paste Problems Printing Basics Print speed and Squeegee pressure are inter-related Factors effecting speed Temperature Cold = slow as pastes are very temperature sensitive Squeegee
More informationAC CENTRIFUGAL FORWARD CURVED FAN 133 x 190
Micromotori Elettrici Svizzera Motor Type AC CENTRIFUGAL FORWARD CURVED FAN 133 x 19 Code: 3.9775 Project code: Poles Stator Impeller Type -4 V 5/6 Hz ~ 1 1 M35 Centrifugal Forward Curved Blade double
More informationC6L/C120L Lockbolt Grade 5.8/8.8
T: +44 (0) 1562 513910 F: +44 (0) 1562 69666 E: sales@rivco.co.uk W: www.rivco.co.uk Vibration Resistant Provides total resistance to vibratory loosening giving greataer reliability in service. 6L/120L
More informationLED Modules. Fortimo LED Line
LED Modules Fortimo LED Line 1ft 1100lm 3R Fortimo LED Line gen 4 will enable you to upgrade your linear LED luminaires to latest high-performance technology while offering the freedom to tune and differentiate
More informationWire Wound Power Inductor
14.April.2009 Proposal from TAIYO YUDEN Wire Wound Power Inductor NR series Line up of NR series ( ) Series code Item code Size ( L x W x H mm) NR ( Standard ) NRH (High Current) NRG (Low DCR) NR3010 NR3012
More informationTable of Contents. Mark 3, SPA 3 & PA 3 Series
Table of Contents...3-9 NSI Symbols... 3 Technical and Operating Data.... How to Order....5-6 Valve with ase....7-8 Manifold lock ssembly...9-0 Sandwich ressure Regulator.... Regulator Service Kits....
More informationRDHA710FR10A1NK. Neutron and Total Ionizing Dose Test Report. October 2009
Neutron and Total Ionizing Dose Test Report International Rectifier currently does not have a DSCC approved Radiation Hardness Assurance Program for MIL-PRF-38534. 205 Crawford St, Leominster, Ma 01453
More informationSS3 Series. Controlled Avalanche Power Diodes. Features: Mechanical Data: SMC/DO-214AB. Page 1 28/03/06 V1.0
SMC/DO-214AB Features: For surface mounted application. Metal to silicon rectifier, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability. Epitaxial
More informationRLB Series Radial Inductors
*RoHS *RoHS *RoHS OMPLINT OMPLINT OMPLINT eatures our types available High rated current for high current circuits vailable in 12 series RoHS compliant* pplications Power supplies D/D converters General
More informationPolicy for Connecting Customer-Provided Equipment to SaskTel s Network
NON-TARIED PRODUTS AND SERVIES Page 396 Policy for onnecting ustomer-provided Equipment to SaskTel s Network Purpose This document is designed to direct customers to sources of comprehensive information
More informationTHE TOTALLY WICKED TORNADO NC CONGRATULATIONS ON PURCHASING YOUR TOTALLY WICKED TORNADO NC ELECTRONIC CIGARETTE KIT
USER MANUAL THE TOTALLY WICKED TORNADO NC CONGRATULATIONS ON PURCHASING YOUR TOTALLY WICKED TORNADO NC ELECTRONIC CIGARETTE KIT 3 QUICK START GUIDE For those familiar with e-cigarettes, the steps below
More informationMatrix Series BGA Sockets
Matrix Series BGA Sockets Featuring HXC Material System DESCRIPTION Tyco Electronics is pleased to announce the Matrix Series of BGA Sockets utilizing HXC 125 polymer. The sockets are fully arrayed matrixes
More informationCree PLCC4 3-in-1 SMD LED CLV1A-FKB
PRODUCT FAMILY DATA SHEET CLD-CT874.009 Cree PLCC4 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
More informationHigh Frequency Ceramic Solutions
Pge 1 of 6 Generl Specifictions Prt Number Frequency (MHz) Return Loss (db) Pek Gin (dbi)* Averge Gin (dbi)* 0900AD54B2450 868-928 2400-2480 6.5 typ. 6.5 typ. 1.1 typ. 1.7 typ. -2.4 typ. -1.5 typ. Efficiency*
More informationFittings & Accessories
Fittings & Accessories Adalet offers a range of fittings and accessories for use in general purpose or industrial locations. These fittings and accessories are used in conjunction with our industrial electrical
More informationFortimo LED Strip Gen3
Strip Gen3 2 ft 2200 lm 1R HV3 Datasheet Fortimo LED Strip Gen3 Fortimo LED Strip systems are ideal for use in designer or miniaturized, slim linear luminaires for architectural applications, which were
More informationE200 ORT - Optical Rotary Torque Transducer. Contents
E200 ORT - Optical Rotary Torque Transducer Contents Optical Rotary Torque Transducer [E200 ORT]: TSE2038R Rotary Torque Transducer Installation Guide: TS3001J Optical Rotary Torque Transducer [E200 ORT]
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationProduct Family Part Number CCT. LUXEON D L130-xxyy003000W21 white
Philips Lumileds IESNA LM-80 Test Report Philips Lumileds IESNA LM-80 Test Report 1. Applicable LUXEON Series part number(s) This IESNA LM-80 Test Report applies to the following LUXEON part numbers: Product
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationOFFICE DIAL BEZEL, 18" With brass liner, 18" flange and fitted glass. Screw on with four quarter point
7. 1. Bezels & Glass Bezels & Glass. Rough edged round and square glass. Round and oval domes with bases. BRASS BEZEL FOR AMERICAN CLOCKS The size is the outside diameter. Because the brass is thin, the
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationP6KE Series DO-15. Mechanical Data
DO-15 Features: Plastic package. Exceeds environmental standards of MIL-STD-19500. 600W surge capability at 10 x 1000µs waveform, duty cycle: 0.01%. Excellent clamping capability. Low zener impedance.
More informationAvoiding the Pitfalls of Voiding in PCB Assemblies. Kim Flanagan Indium Corporation SMTA Capital August 23 rd, 2018
Avoiding the Pitfalls of Voiding in PCB Assemblies Kim Flanagan Indium Corporation SMTA Capital August 23 rd, 2018 Overview I. What is Voiding i. Causes I. Key Factors to Consider i. Symptom or Defect
More informationApproval Signature: Original signed by B. Postl. June 2007
POLICY REGIONAL Applicable to all WRHA governed sites and facilities (including hospitals and personal care homes), and all funded hospitals and personal care homes. All other funded entities are excluded
More informationCu/SnAg Double Bump Flip Chip Assembly as an Alternative of Solder Flip Chip on Organic Substrates for Fine Pitch Applications
Cu/SnAg Double Bump Flip Chip Assembly as an Alternative of Solder Flip Chip on Organic Substrates for Fine Pitch Applications Ho-Young Son 1), Gi-Jo Jung 2), Jun-Kyu Lee 2), Joon-Young Choi 2), and Kyung-Wook
More informationVerification Report. Report No.:RLSZD Page 2 of As specified by client, to determine the Lead, Cadmium,
Report No.:RLSZD0011291506 Page 1 of 13 CENTRE TESTING INTERNATIONAL Applicant Address Part No. :TOP DEN ELECTRONICS CO. LTD :SIJIA INDUSTRIAL AREA SHIJIE TOWN DONGGUAN CITY GUANGDONG PROVINCE CHINA :DUNU-DN17
More information3D TSV Cu Pillar Probing Challenges & Experience
3D TSV Cu Pillar Probing Challenges & Experience Ray Grimm/Mohamed Hegazy SV TCL An SV Probe Company Linjianjun (David) Hi Silicon Rick Chen SPIL The Challenges 2 Cu Pillar Bump Reliability Shear Test
More informationTopology... 1-wire Multiplexer, 2-wire 79 1 Multiplexer
DEVICE SPECIFICATIONS NI PXIe-2526 1-wire 158 1 Multiplexer This document lists specifications for the NI PXIe-2526 (NI 2526) multiplexer relay module. All specifications are subject to change without
More informationELWOOD HIGH PERFORMANCE MOTORS SF-SERIES MOTOR DATA
MOTOR MODEL M422-L M423-S M422-L M423-S 115V 115V 230V 230V Nm 0.62 0.99 0.62 0.99 lb-in 5.49 8.81 5.49 8.81 Nm 1.86 2.97 1.86 2.97 lb-in 16.47 26.43 16.47 26.43 Rated Current Arms 0.85 1.59 1.7 3.18 kw
More informationSolutions to Technical Challenges for WLBI Steve Steps
Solutions to Technical Challenges for WLBI Steve Steps Major Technical Challenges Only three major challenges Thermal Mechanical Electrical June 9, 2002, Page 2 Major Thermal Challenges Adding heat or
More informationAFD: PUR: UM: ENQ: 28 2 nd January, 2019 PURCHASE INQUIRY FOR MAIDA
AFD: PUR: UM: ENQ: 28 2 nd January, 2019 PURCHASE INQUIRY FOR MAIDA Subject: - Inquiry for purchase of wheat flour (maida) first quality We invite your most competitive rates for supply of wheat flour
More informationSMT DDRIII SOCKET ASS'Y
1 3 4 4.00 PIN#11 1.30 KE W G 5.80 1.45 + 0.07 PIN#40 7.60 3.60 0.88#0.10 ONTT GP.0 PIN#1 1.000 133.75 0.10 SLOT LENGH PIN#10 E 147.08 REF.(160 M. LTH OPEN) 18.8 MIN. TE OE 7 SETING HEIGHT.30 0.10 0.10
More informationDKK-1 ELISA, Cat.No. BI For the quantitative determination of DKK-1 in human serum
DKK-1 ELISA, Cat.No. BI-20413 For the quantitative determination of DKK-1 in human serum ASSAY CHARACTERISTICS Method Standard range Conversion factor Sample volume / well Incubation time, temp. Sensitivity
More informationSHS SURFACE MOUNT HEAT SINK for D, D2 & D3 Pak SMART HEATSINKS SURFACE MOUNT HEAT SINKS
SMART HEATSINKS SURFACE MOUNT HEAT SINKS Smart Heatsinks introduces an innovation in SMT compatible heat sinks to meet the needs of newer higher power SMT semiconductors. The heat sinks unique design (Patent
More informationQualification and Performance Specification for Rigid Printed Boards
Qualification and Performance Specification for Rigid Printed Boards Developed by the Rigid Printed Board Performance Specifications Task Group (D-33a) of the Rigid Printed Board Committee (D-30) of IPC
More informationMike Hinds, Royal Canadian Mint
Experience in the Use of the LBMA Reference Materials Mike Hinds Royal Canadian Mint LBMA Assayer and Refiner March 2011 1 LBMA RM Project 2007-2010 2 Gold Reference Materials AuRM1 and AuRM2 Available
More informationMIL-T-81714/21, /23 Series I
MIL-T-81714/21, /23 Series I MIL-T-81714/21, /23 Series I Compatible Electronic Splices Single/Dual/Diode Operating Range Temperature: -65ºC to 200ºC Insulation Resistance: 5000 Megaohms Dielectric Withstanding
More informationParts Catalog Issued: May 12, Pulse Oximetry Equipment
Parts Catalog Issued: May 12, 2016 Pulse Oximetry Equipment Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts
More informationProduct Family Part Number Nominal CCT LUXEON D L W K LUXEON D L W K
Philips Lumileds IESNA LM-80 Test Report Philips Lumileds IESNA LM-80 Test Report 1. Applicable LUXEON Series part number(s) This IESNA LM-80 Test Report applies to the following LUXEON part numbers: Product
More informationIPC-6018A. Microwave End Product Board Inspection and Test IPC-6018A. A standard developed by IPC. Supersedes IPC-6018 January 1998
ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES Microwave End Product Board Inspection and Test January 2002 A standard developed by IPC Supersedes IPC-6018 January 1998 2215 Sanders Road, Northbrook, IL
More informationORTHO BioVue System Handbook
ORTHO iovue System Handbook Table of Contents A A1 A2 A3 A4 A5 A6 A7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 SYSTEM PRESENTATION iovue Cassette Description iovue System Description iovue
More informationComfort, the Intelligent Home System. Comfort Scene Control Switch
Comfort, the Intelligent Home System Comfort Scene Control Sitch Introduction...1 Specifications...3 Equipment...3 Part Numbers...3 Identifying the SCS Version...4 Contents...4 Assembly...4 Settings...5
More information44 CE - SURFACE-MOUNTING BOXES IN GW PLAST 75; GWT 650 C FOR ORDINARY JUNCTIONS TECHNICAL CHARACTERISTICS
44 CE - SURFACE-MOUNTING BOXES IN GW PLAST 75; GWT 650 C FOR ORDINARY JUNCTIONS Standard: EN 60670-1 (CEI 23-48); EN 60670-22 (23-94) Degree of protection: IP44; IP55; IP56 Protection against indirect
More information( 6.48) SECTION S-S LEGS DIMENSION (2X) WIDTH: THICKNESS:
1 3 4 PRT NUMER ONTT RE PLTING 1LF.75um GOL 1FLF GOL FLS 6.65.63 M3.5 1.. 3..38 8.1 ( 9.) OF IM..9 ( 6.48).1 S 11.45 1.45 7.9 R.4.1 7.5 14.5 6.5.9 13.5.9 S Z 1.9 Y 3.3.5 SETION SS SEE ETIL.9 3.18 1.51.1
More informationQUANTUM. Body Composition Scale. 396lb x 0.2lb 180kg x 0.1kg
QUANTUM Body Composition Scale 396lb x 0.2lb 180kg x 0.1kg Quantum Manual Thank you for purchasing the American Weigh Quantum Body Composition Scale. Please read all operating instructions carefully before
More informationApplication Packet. The Application for Funds must be complete and submitted by the due date in order to be considered.
2018 Grant Schedule: Applications Due May 2, 2018 Grants Awarded May 18, 2018 Applications Due October 24, 2018 Grants Awarded November 9, 2018 Application Packet The Application for Funds must be complete
More informationChildren and Young People s Service Extended Service SCHOOL FOOD SUPPORT SERVICE
Children and Young People s Service Extended Service SCHOOL FOOD SUPPORT SERVICE SENIOR LUNCH MENU ANALYSIS REPORT. School Name Brockington College Blaby Rd, Enderby Contact Name Jane Leics, LE19 4AQ Telephone
More informationWilmad Your One Stop NMR Shop
Wilmad Your One Stop NMR Shop 100% Inspected Precision Tools Because Nothing is More Important Than Your Results Prepare to Discover Wilmad 5mm OD Thin Walled Economy NMR Tubes Economy Designed for routine
More informationALBA MEDICAL SYSTEMS, INC.
Patient Name: ALBA MEDICAL SYSTEMS, INC. CANINE HOLTER MONITORING REPORT www.albamedical.com MANDAS HEVEA Holter Monitor Report Physician: Date of Birth: Scan Number: ID #: 2 Date Recorded: 6/14/13 Age:
More informationEC type-examination certificate UK/0126/0027 Revision 5
UK/0126/0027 MI-008 EC type-examination certificate UK/0126/0027 Revision 5 issued by: The National Measurement Office Notified Body Number 0126 In accordance with the requirements of the Measuring Instruments
More informationEC type-examination certificate UK/0126/0027 Revision 4
UK/0126/0027 MI-008 EC type-examination certificate UK/0126/0027 Revision 4 issued by: The National Measurement Office tified Body Number 0126 In accordance with the requirements of the Measuring Instruments
More informationUSER SPECIFICATIONS FOR QUINTOLUBRIC 888 Series DESCRIPTION OF THE MOST IMPORTANT PROPERTIES AND THE POSSIBLE VARIATIONS AND TOLERANCES
USER SPECIFICATIONS FOR QUINTOLUBRIC 888 Series OVERVIEW The QUINTOLUBRIC 888 Series of fluids are based on a synthetic organic ester, which is the main base component, plus a number of selected additives
More informationStandard Products ACT15530 CMOS Manchester Encoder / Decoder May 16, 2005
Standard Products ACT15530 CMOS Manchester Encoder / Decoder www.aeroflex.com/avionics May 16, 2005 FEATURES MIL-STD-1553 Compatible 1.25 Megabit/sec Maximum Data Rate Sync Identification and Lock-in Clock
More informationSt. Jude Medical 8-Channel Adapter. Clinician's Manual
St. Jude Medical 8-Channel Adapter Clinician's Manual CAUTION: Federal (USA) law restricts this device to sale by or on the order of a physician. For U.S. California Only: Proposition 65, a State of California
More informationThermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the "C" dimension of the toroid.
A ring configuration provides the ultimate utilization of the intrinsic ferrite material properties. Toroidal cores are used in a wide variety of applications such as power input filters, ground-fault
More informationTEMPERATURE and HUMIDITY TRANSDUCER SUPPLIED P18L TYPE USER S MANUAL. from a CURRENT LOOP
TEMPERATURE and HUMIDITY TRANSDUCER SUPPLIED from a CURRENT LOOP P18L TYPE USER S MANUAL Contents 1. Application... 2 2. Basic requirements, operational safety... 2 3. Installation... 2 3.1. Assembly...
More informationCurrent Voltage characteristic of biological tissue: Body resistance
6_Current Voltage characteristic of biological tissue.xlsx/work procedure Study group: Year of study: Current Voltage characteristic of biological tissue: Body resistance Objective: Establish the mean
More informationComplex Medical Devices and Steam Sterilization. By Andrew Gay Director - Sterilizer Validation Australia
Complex Medical Devices and Steam Sterilization By Andrew Gay Director - Sterilizer Validation Australia About 10 years ago, during a routine Performance Qualification test, an observation was made that
More informationISOMALT. Chemical formula 6-O-alpha-D-Glucopyranosyl-D-sorbitol: C 12 H 24 O 11 1-O-alpha-D-Glucopyranosyl-D-mannitol dihydrate: C 12 H 24 O 11 2H 2 O
ISOMALT Prepared at the 69th JECFA (2008), published in FAO JECFA Monographs 5 (2008), superseding specifications prepared at the 46th JECFA (1996), published in the Combined Compendium of Food Additive
More informationDuPont Nafion PFSA Membranes NRE-211 and NRE-212 Perfluorosulfonic acid polymer. Membranes. Product Information. Description. Coversheet.
DuPont Nafion PFSA Membranes NRE-211 and NRE-212 Perfluorosulfonic acid polymer Product Information Membranes Description DuPont Nafion PFSA NRE-211 and NRE-212 membranes are non-reinforced dispersion-cast
More informationAccessories for New Brunswick Shakers: Dimensions and Capacities
Accessories for New Brunswick Shakers: Dimensions and Capacities Applications Training Document, Apr. 2014 For internal and external use Author Technical Applications, Enfield, USA Contact RSCs: Contact
More information