User Manual Complete Prosthetic Kit (CPK)

Transcription

1 User Manual Complete Prosthetic Kit (CPK)

2 The Complete Prosthetic Kit is designed to enable easy impression and transfer technique and to prevent the need to remove and to re-tighten the abutments. Advantages at a glance. A selection of lengths, diameters and gingival heights. Compatible with crowns or bridges restorations. Can be used immediately after implantation. Offers improved tissue healing.

3 Combination. The Complete Prosthetic Kit contains all the necessary components for the dentist to take an impression after implant placement, as well as all the components required for the technician for the fabrication of crowns and bridges. Precision. The Complete Prosthetic Kit ensures an accurate fit for the impression procedure and the restorative process. Kit. The Complete Prosthetic Kit enables a simple restorative process by offering four vertical heights of narrow, standard or wide platforms, without any necessary adjustments or additional components.

4 Kit contents.

5 Anatomic transgingival abutment with screw - Gingival height: 1, 2, 3, 4mm - Crown height for Standard/ Wide platform: 4, 6, 8mm - Crown height for Narrow platform: 4, 6mm Burn out anti-rotation plastic cap

6 Burn out plastic cap Abutment analog - Crown height for Standard/Wide platform: 4, 6, 8mm - Crown height for Narrow platform: 4, 6mm Plastic healing cap - Crown height for Standard/Wide platform: 4, 6, 8mm - Crown height for Narrow platform: 4, 6mm Mount transfer plastic cap

7 Catalog number index. XX-XPK XX Kit Complete Prosthetic Kit Crown height (4,6,8mm) Gingival height (1,2,3,4mm)

8 Operating Procedure Steps. 1 Assemble the CPK abutment on the implant. Recommended tightening moment: Ncm. Internal Hexagon Connection

9 External Hexagon Connection

10 2. Insert the impression coping plastic cap on the CPK abutment. The hatch on the top of the plastic transfer indicates the location of the flat area (anti-rotation).

11 2A Snap engagement. Indicates the right location of the impression coping plastic cap on the abutment.

12 3 Take the impression. Recommended impression material: silicone over 20- shore hardness.

13 4 Place the temporary healing cap on top of the abutment, to allow soft tissue healing. Use temporary glue. Optional procedure: Take out the abutment and place a titanium healing cap according to tissue thickness.

14 Operating procedure: In the laboratory 5 Insert the abutment analog into the plastic cap (in the impression tray). Verify that the analog fits properly.

15 6 Place the wax-up anti-rotation plastic cap on the abutment analog. Cut the plastic cap according to analog height. For bridge reconstruction cases, use the white burn out plastic cap without the flat area.

16 7 The plastic copings for CPK abutment are fitted thanks to a snap mechanism on the plastic that is sited on the analog abutment. This allows the abutment to be perfectly positioned and fixed on the analog. However, once the coping has been cast, it is essential to remove excess material using the MT-CS450 reamer shoulders before placing the abutment on the analog.

17 W W W. M I S - I M P L A N T S. C O M

18 Instrument maintenance. Steam sterilization: Insert the cleaned and disinfected abutment in a single-use medical grade sterilization pouch.steam sterilize by autoclave,using either one of the following recommended conditions: Cycle type Temperature Exposure time (min.) Drying time (min.) Gravity displacement 135 C / 275 F 10 minutes 30 minutes Pre-vacuum 132 C / 270 F 4 minutes 30 minutes

19 The CPK is not intended for use with crowns cast directly onto the abutment analog, such as a CAD/CAM or Captek process. When using such a process, work directly off the CPK abutment. All parts of the Complete Prosthetic Kits are supplied non-sterile. The plastic components are for single use only. Key to codes used: Attention, see instructions for use Catalogue Number Manufacturer Batch Code Single use

20 EC REP MIS Implants Technologies Ltd. P.O.Box 7, Bar Lev Industrial Park , ISRAEL Website: MIS Implants Technologies GmbH Simeonscarre 2, Minden, Germany Tel: MIS Corporation. All rights reserved. MP-UI029 Rev. 6.1, Apr 2015