CARES D series. CARES M series. CARES Integrated Digital Solutions CARES In-Lab Milling. Product Information. Post Processing

Transcription

1 Product Information CARES Integrated Digital Solutions CARES In-Lab Milling CARES D series CARES M series Data Acquisition Planning Surgery Impression Design Production Post Processing Final Restoration

2 CARES M series wet, wet/dry and dry-milling in a single system The CARES M series milling and grinding system enables dental laboratories to produce an etensive range of restorations for every type of indication. It can handle a wide range of materials. Allowing your lab to produce a broad range of prosthetics, from inlays, onlays, veneers, and single crowns, to bridges and screw-retained restorations. Prosthetics can be milled or ground in wet or dry modes from materials, including glass ceramic, zirconia, PMMA, cobalt-chromium sinter metal, wa, lithium disilicate ceramics and resin nanoceramic. The CARES M series is a single system that can handle the majority of your casework. With multiple workflow options, you can enjoy the full fleibility of using one system regardless of what case appears from your customer. For work peaks or comple cases, our centralized milling facility operates as an etension of your lab. Maimum range of materials and indications thanks to 5-ais wet and dry processing in one unit Innovative processing procedures ensure maimum value creation (e.g. rotational milling of titanium, processing of full dentures) Intelligent machine design guarantees optimum protection of all electronic components during wet operation Super high frequency spindle highly precise, stable, quiet running Blank holder echangeable, depending on material or indication Tool length measuring unit includes fracture check and calibration 6 tool spaces with automatic tool changer Suction bag for increased suction performance and reduced spray water Blank holder and wet/ dry processing mode in only a few steps Coolant supply tank connection large volume capacity ensures long operating cycles 2 Straumann CARES Integrated Digital Solutions

3 CARES M series Indications Crowns/bridges fully anatomical/anatomically reduced Inlay/Onlay Veneer Overpress fully anatomical Telescope crown Attachment Custom titanium abutment Bridge on conical titanium bases Multi-unit, screw-retained restorations on titanium bases Bar on titanium base Digital model fabrication M series Material Material Type Processing Dry ~ / Wet S M series Dry/Wet Straumann n!ce Lithium silicate ceramic S Zirconia Zirconia ~ Wa* Milling wa S ~ PMMA* Acrylic, transparent S ~ TEMP* Acrylic, PMMA S ~ Splintec* Acrylic splints, PMMA S ~ JUVORA PEEK* Polymer resin S ~ Ti-Forms* Titanium S VITA ENAMIC * Hybrid ceramic S ~ VITABLOCS Mark II/TriLue forte* Fine-structure feldspar ceramic S IPS e.ma CAD, Ivoclar Vivadent Lithium disilicate ceramic S Produce premium restorations using high-performance materials from Straumann and other leading suppliers. Straumann CARES Lab offers a range of CADCAM materials, with disks to meet your specific needs. *Not cleared for Ti-Base resotrations for in-lab milling. Validated Workflow: Scanning CAD CAM Straumann CARES Integrated Digital Solutions 3

4 CARES M series TECHNICAL DATA STRAUMANN CARES M SERIES: Aes 5 Processing mode Tool management Power Output: Motor Speed Compressed Air Dimensions Weight Straumann CARES Coolstream tank Straumann CARES Coolstream cart Dry / Wet 6-compartment tool changer, management of replacement tools 250 W 100,000 rpm 50 L/min. at 6 bar 650/570/740 mm (DWH) 75 78kg 500/200/400 mm (DWH), 5kg 580/200/880 mm (DWH), 42kg Item No STM STM STM Item Straumann CARES M series Straumann Coolstream tank Straumann Coolstream cart ACCESSORIES: Therm 3 Argotherm 2 Fully automatic high performance furnace for final sintering of distortion-free zirconium oide frameworks Shielding gas sinter furnace and flood chamber for Sintron 4 Straumann CARES Integrated Digital Solutions

5 CARES D series 5-ais technology in a small footprint Splints, bars, implant bridges The 5-ais unit of the CARES D series not only masters conventional crown and bridge work, but is also designed for the fabrication of more comple components with dry millable materials. High rigidity and stability Straumann CARES D series offers high rigidity and stability without having to forgo the advantages of 5-ais technology. This results in low-vibration processing which, produces impressive precision on the blank. Efficiency and fleibility Fast processing times, a wide range of indications and high quality materials make the CARES D series a genuine winner in the laboratory. High-frequency spindle etremely robust and precise 8 tool space with automatic tool changer Blank holder conversion in only a few steps Tool length measuring unit Incl. fracture check Interior lighting for visual inspection of milling Presence sensor for milling tools Connection for etraction protects the internal mechanism against contamination Straumann CARES Integrated Digital Solutions 5

6 CARES D series Indications Crowns/bridges fully anatomical/anatomically reduced Inlay/Onlay Veneer Overpress fully anatomical Telescope crown Bridge on conical titanium bases Multi-unit, screw-retained restorations on titanium bases Bar on titanium base Digital model fabrication D series Material Material Type D series Dry Sintron* CoCr sinter metal Zirconia Zirconia Wa* Milling wa PMMA* Acrylic, transparent TEMP* Acrylic, PMMA Splintec* Acrylic splints, PMMA JUVORA PEEK* Polymer resin Produce premium restorations using high-performance materials from Straumann and other leading suppliers. Straumann CARES Lab offers a range of CADCAM materials, with disks to meet your specific needs. *Not cleared for Ti-Base resotrations for in-lab milling. Note: Product availability varies by country. Check with your Straumann Lab Territory Manager for availability. Validated Workflow: Scanning CAD CAM 6 Straumann CARES Integrated Digital Solutions

7 CARES D series TECHNICAL DATA STRAUMANN CARES D SERIES: Aes 5 Processing mode Tool management Power Output: Motor Speed Compressed Air Dimensions Weight Dry 8-compartment tool changer, management of replacement tools 250 W 60,000 rpm 50 L/min. at 6 bar 480/480/535 mm (DWH) 50 kg Item No STM Item Straumann CARES D series ACCESSORIES: Therm 3 Argotherm 2 Fully automatic high performance furnace for final sintering of distortion-free zirconium oide frameworks Shielding gas sinter furnace and flood chamber for Sintron Straumann CARES Integrated Digital Solutions 7

8 Straumann North American Headquarters Straumann USA, LLC 60 Minuteman Road Andover, MA Phone 800/ (US) 800/ (CA) Fa 978/ Straumann USA, LLC All rights reserved. Straumann and/or other trademarks and logos from Straumann that are mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved. ifu.straumann.com NAMLIT /18 V1