Product information PHYTO solution.... Plant nutrition with system

Transcription

1 Product information 2019

2

3 Preamble The PHYTOsolution-3-Step-System: S Leaf/ plant tissue analyses in advance S Identification of nutrient deficiencies S Specific fertilisation and support for the culture PHYTOsolution with it`s location in Freyburg/Unstrut - in the eastern part of Germany near Leipzig - is specialized in the development and production of biostimulants and liquid fertilizers for leaf or soil application in the areas of farming, horticulture, vegetable, fruit and wine, home and garden. PHYTOsolution is your partner for innovative concepts in plant nutrition. Besides a wide product range we also offer individual help. Leaf analyses and advisory services help you to keep your cultures in a well balanced nutrition. PHYTOsolution tries to use raw materials which confirm to EU regulations for organic growing whenever possible. The micronisation of natural rock flours enables us to formulate highly concentrated suspensions for various nutrients. A second speciality is the use of natural low-molecular weight Carboxylic Acids as complexing agents and physionutrient for water soluble nutrient fertilisers. Our products are very easy to handle and very well tolerated by plants and the environment. PHYTOsolution keeps the product line always up to date to the state of scientific knowledge and optimizes the recipes or expands the range with new useful products. With our special service, a fast and meaningful leaf analysis we also guarantee an optimal and efficient use of our products. LEAF ANALYSIS PHYTOsolution closely cooperates with the Institut für Agrar- und Umweltanalytik in Freyburg. IAU analyses and evaluates soil and plant tissues within a short period of time. The results dislose nutrient deficiencies of any culture. A following well-directed treatment with single nutrients helps the culture to recover immediately. We will be happy to cooperate with you and look forward to personal contacts. With best regards, Werner Bannach

4 Product overview Organic N-Fertilizer (Amino Acids) NPK- and Bio-NPK-Fertilizer Liquids Biostimulators Multiple Nutrient Fertilizer Single Nutrient Fertilizer Culture Specific Fertilizer; Adjuvants

5 Contents Page Organic Nitrogen Fertilizer based on Amino Acids Plantosol...8 Bio-Plantosol...9 PhytoGreen -Booster...10 PhytoGreen -BioBooster...11 NPK-Fertilizer Liquids ASKAPHY PhytoGreen -NPK PhytoGreen -NPK PhytoGreen -NPK PhytoGreen -NPK Micro elements...16 PhytoGreen -NPK Plus ( Mg+ micros)...17 PhytoGreen -NP Liquid PhytoGreen -PK Plus ( Mg + Mn)...19 PhytoGreen -HiPhos ( Mg)...20 PhytoGreen -NPK Complete (solid formulation)...21 Bio-NPK-Fertilizer Liquids PhytoGreen -NK-Bio...22 PhytoGreen -NPK-Bio PhytoGreen -NPK-Bio PhytoGreen -NPK-Bio PhytoGreen -NPK-Bio PhytoGreen -NPK-Bio Biostimulators Phytosol...28 Phytosol -Duo...29 PhytoGreen -Algae Extract...30 AminoAlg...31 Bio-AminoAlg...32 Black Hum...33 PhytoGreen -Humus WP...34 Multiple Nutrient Fertilizer PhytoGreen -CalPhos...35 PhytoGreen -MagS...36 PhytoGreen -ManganeseNitrate...37 PhytoGreen -Silicium...38 PhytoGreen -MultimicroMix Carbo...39 Single Nutrient Fertilizer PhytoGreen -Boron...40 CARBO-ECO Ca (Agricalcio)...41 PhytoGreen -CalciumCarboxylate...42 PhytoGreen -Cu CARBO-ECO Cu...44 Page PhytoGreen -CopperCarboxylate...45 CARBO-ECO Fe...46 PhytoGreen -IronCarboxylate...47 CARBO-ECO K...48 PhytoGreen -PotassiumCarboxylate...49 PhytoGreen -Manganese CARBO-ECO Mn...51 PhytoGreen -ManganeseCarboxylate...52 PhytoGreen -Manganese CARBO-ECO Mg...54 PhytoGreen -MagnesiumCarboxylate...55 PhytoGreen -Mg PhytoGreen -Molybdenum...57 PhytoGreen -Sulphur PhytoGreen -Zinc CARBO-ECO Zn...60 PhytoGreen -ZincCarboxylate...61 Culture Specific Fertilizer for seed treatment: PhytoGreen -CerealStarter...62 PhytoGreen -CornStarter...63 PhytoGreen -PotatoStarter...64 PhytoGreen -LegumeStarter...65 PhytoGreen -PumpkinStarter...66 PhytoGreen -WeedStarter...67 for foliar treatment: PhytoGreen -CerealMix...68 PhytoGreen -CerealMix Carbo...69 PhytoGreen -CornMix...70 PhytoGreen -CornMix Carbo...71 PhytoGreen -FruitColour...72 PhytoGreen -FruitCombi...73 PhytoGreen -RapeseedMix...74 PhytoGreen -RapeseedMix Carbo...75 PhytoGreen -CitrusMix...76 Adjuvants PhytoGreen -CropCover PhytoGreen -ph Optima...78 PhytoGreen -ph Total...79 CARBO-ECO ph...80 Citrisol...81 PhytoGreen -PowerClean...82 Leaf and Fruit Analysis Analysis order form...84 Example of leaf analysis result...85 Sampling

6 Summary of fertilizers density Product macro nutrient* micro nutrients* further* * amounts given in % w/w and g/l N P2O5 K2O Ca Mg S B Cu Fe Mn Mo Zn SiO2 Algen kg/l (leaf application) ph Recommentations Organic growers catalogue page Plantosol 8 Bio-Plantosol 9 9,0% 108 g/l 6,5% 71,5 g/l PhytoGreen -Booster 10 8,0 % 96 g/l PhytoGreen -BioBooster 11 6,0% 66 g/l ASKAPHY ,0% 42 g/l PhytoGreen-NPK % 145 g/l PhytoGreen-NPK ,0% 97 g/l PhytoGreen -NPK ,0% 65 g/l PhytoGreen -NPK ,0% 93 g/l PhytoGreen -NPK Plus (9-6-3+Mg+Microel.) 17 9,6% 120 g/l PhytoGreen -NP Liquid ,0% 84 g/l 27% 378 g/l 4% 48 g/l 8%; 97 g/l 20% 260 g/l 21% 279 g/l 6,4% 80 g/l 18% 216 g/l 18% 252 g/l 6% 73 g/l 6% 73 g/l 5% 65 g/l 7% 93 g/l 3,2% 40 g/l 1,2% 14,4 g/l to reduce stress, to repel of ground game, to improve plant protection: 5,5 1,2 all cultures 2-7,5 l/ha 07;Xgen to reduce stress, to repel of ground game, to improve plant protection: 4 1,1 all cultures 2-7,5 l/ha 07;FiBL;Xgen x 5 1,2 Vegetables/Fruits/Grapes 0,3-1 l/ha 07 x 5 1,1 Vegetables/Fruits/Grapes 0,3-1 l/ha 07 0,01% 0,02% 0,02% 0,01% 0,001% 0,01% 5 1,37 Fungizid; Arable crops/vegetables/fruits/grapes 2-3 l/ha 0,01% 0,002% 0,02% 0,01% 0,001% 0,01% 5 1,2 Arable crops/vegetables/fruits/ornamentals 2 8 l/ha 0,01% 0,005% 0,01% 0,01% 6,5 1,2 Arable crops/vegetables/fruits/ornamentals 2 8 l/ha 1,2 1,3 Arable crops/vegetables/fruits/ornamentals 5 10 l/ha 0,02% 0,05% 0,05% 1,1 1,33 Arable crops/vegetables/fruits/ornamentals 5 10 l/ha 0,03% 0,006% 0,18% 0,0004 0,007% 2,2 1,22 Arable crops/vegetables/fruits/ornamentals 2 l/ha % 8 1,2 Arable crops/vegetables/fruits/ornamentals 5 10 l/ha 0,8% 2,7 1,2 Arable crops/vegetables/fruits/ornamentals 1-4 l/ha 9,6 g/l 2 1,44 Arable crops 2,5-5 l/ha 11% 7% 0,6% PhytoGreen -PK Plus ( Mg+Mn) g/l 84 g/l 7,2 g/l 31% 5% 3,4% PhytoGreen -HiPhos ( Mg) g/l 74 g/l 48,2 g/l PhytoGreen -NPK Complete (Feststoff) 21 20% 8% 14% 1,2% 9,7% 0,04% 0,2% 0,02% 0,26% 0,006% 0,14% fest Arable crops/vegetables/fruits/ornamentals2,5 5kg/ha PhytoGreen -NK-Bio 22 4% 52 g/l PhytoGreen -NPK-Bio % 33 g/l PhytoGreen -NPK-Bio ,0% 38 g/l PhytoGreen -NPK-Bio % 50 g/l PhytoGreen -NPK-Bio % 95 g/l PhytoGreen -NPK-Bio % 115 g/l PhytoGreen -CalPhos 35 3,0% 40 g/l PhytoGreen -MagS 36 PhytoGreen -ManganeseNitrate 37 7,7% 119 g/l PhytoGreen -Silicium 38 0,1% 1,3 g/l 5% 67 g/l 4% 51 g/l 1% 13 g/l 2% 27 g/l 3% 45 g/l 23,3% 310 g/l 5% 67 g/l 6,5% 84 g/l 8% 112 g/l 3,0% 38 g/l 5% 64 g/l 2% 27 g/l 4% 56 g/l 13% 174 g/l 0,8% 10 g/l 5,0% 80 g/l 4,4% 57 g/l 1,5% 20 g/l 2,2%; 50 g/l 3%; 50 g/l 3% 40 g/l 0,1% 1,5 g/l 0,3% 3 g/l 0,3% 3,9 g/l 0,1% 1,5 g/l 0,1% 1,5 g/l 18% 289g/l 1% 13 g/l 2,0% 30 g/l 1% 12 g/l 1% 13 g/l 1% 17 g/l 0,7% 9g/l 22% 360g/l Organic N-Fertilizer (Amino acids) 0,0005 % 0,1% 1,5 g/l 0,01% 0,1% 1,5 g/l 0,0004 % 0,0003 % NPK-Fertilizer Liquids Bio NPK-Fertilizer Liquids 0,1% 1,5 g/l 0,1% 1,5 g/l 0,1% 1,5 g/l 0,2% 3 g/l 0,1% 1,3 g/l 0,1% 1,5 g/l 0,1% 1,5 g/l 0,1% 1,5 g/l 0,2% 3 g/l 0,1% 1,3 g/l 0,1% 1,5 g/l 0,1% 1,5 g/l 15% 235g/l 0,1% 1,5 g/l 0,2% 3 g/l 0,1% 1,3 g/l 0,1% 1,5 g/l 0,1% 1,5 g/l Multiple Nutrient Fertilizer 7% 94 g/l 5,5-6,5 ca. 1,2 Arable crops/vegetables/fruits/grapes/ornamentals 4-8 l/ha 07;FiBL;Xgen x 5,5-6,5 ca. 1,3 Arable crops/vegetables/fruits/grapes/ornamentals 4-8 l/ha 07;FiBL;Xgen x 5,5-6,5 ca. 1,4 Arable crops/vegetables/fruits/grapes/ornamentals 4-8 l/ha 07;FiBL;Xgen x 5,5-6,5 ca. 1,3 Arable crops/vegetables/fruits/grapes/ornamentals 4-8 l/ha 07;FiBL;Xgen x 5,5-6,5 ca. 1,4 Arable crops/vegetables/fruits/grapes/ornamentals 4-8 l/ha 07;FiBL;Xgen x 5,5-6,5 ca. 1,4 Arable crops/vegetables/fruits/grapes/ornamentals 4-8 l/ha 07;FiBL;Xgen 1 1,33 Arable crops/vegetables/fruits 5-10 l/ha ,6 Arable crops/fruits/grapes 1-5 l/ha ca. 1,5 1,55 Arable crops/vegetables/fruits 1-2 l/ha 12 1,34 All cultures 1-3 l/ha PhytoGreen -MultimicroMix Carbo 39 6,60% 6,40% 0,30% 0,50% 1,50% 1,50% 0,10% 2,00% 2 1,34 All cultures: foliar 5 l/ha, soil 4-8 l/ha PhytoGreen -Boron 40 CARBO-ECO Ca (Agricalcio) 41 PhytoGreen -CalciumCarboxylate 42 PhytoGreen -Cu % 108 g/l 7% 80 g/l 10%; 130 g/l 11% 150 g/l Single Nutrient Fertilizer 19,25% 256g/l ca. 8 1,36 Arable crops/vegetables/fruits/grapes 1-3 l/ha 07;FiBL;Xgen 12 1,12 Arable crops/vegetables/fruits/grapes 2-4 l/ha 07;FiBL:BCS 6 1,35 Arable crops/vegetables/fruits/grapes 2-4 l/ha 7-9 1,33 Cereal/Grapes 0,2 0,75 l/ha 07

7 CARBO-ECO Cu 44 PhytoGreen -CopperCarboxylate 45 CARBO-ECO Fe 46 PhytoGreen -IronCarboxylate 47 CARBO-ECO K 48 PhytoGreen -PotassiumCarboxylate 49 PhytoGreen -Manganese % 45 g/l CARBO-ECO Mn 51 PhytoGreen -ManganeseCarboxylate 52 PhytoGreen -Manganese PhytoGreen -MagnesiumCarboxylate 54 CARBO-ECO Mg 55 6% 80 g/l PhytoGreen -Mg PhytoGreen -Molybdenum 57 PhytoGreen -Sulphur PhytoGreen -Zinc40 59 CARBO-ECO Zn 60 PhytoGreen -ZincCarboxylate 61 PhytoGreen -CerealMix 68 1,8% 28 g/l PhytoGreen -CerealMix Carbo 69 1,4% 17 g/l PhytoGreen -CornMix 70 PhytoGreen -CornMix Carbo 71 PhytoGreen -FruitColour 72 PhytoGreen -FruitCombi 73 10% 150 g/l PhytoGreen -RapeseedMix 74 PhytoGreen -RapeseedMix Carbo 75 PhytoGreen -CitrusMix 76 4,7% 80 g/l PhytoGreen -CerealStarter 62 PhytoGreen -CornStarter 63 PhytoGreen -PotatoStarter 64 PhytoGreen -LegumeStarter 65 1,5% 20g/l PhytoGreen -PumpkinStarter 66 1,3% 17g/l PhytoGreen -WeedStarter 67 2% 27g/l 1% 16g/l 1% 15g/l 2% 28 g/l Phytosol 28 Phytosol -Duo 29 5% 67,5 g/l 0,1% 1,2 g/l 0,1% 1,5g/l 0,08% 1g/l 0,1% 1g/l 0,1% 1,6g/l 20% 264 g/l 33% 502 g/l 5,4% 71,8g/l 3% 35,6g/l 20% 301g/l 7,7% 119g/l 1,2% 15g/l 4% 48 g/l 56% 800g/l 5% 77 g/l 0,3% 4 g/l 256 /l 5% 58 g/l 5% 57 g/l 1,5% 23 g/l 1% 12 g/l 1% 12 g/l 5% 58 g/l 5% 58 g/l 27% 500g/l 5% 58 g/l 5% 59 g/l 10,9% 150 g/l 10,7% 166 g/l 3% 38 g/l 11% 170 g/l 4% 50 g/l 15,6% 215 g/l 0,1% 1,2 g/l 40% 700g/l 5% 58 g/l 5% 58 g/l 4,5% 70 g/l 2% 25 g/l 6% 93 g/l 2% 25 g/l 1,3 1,16 Cereal/Vegetables/Grapes 2-3 l/ha 07;FiBL;Xgen;BCS 2,4 1,14 Cereal/Vegetables/Grapes 2-3 l/ha 1,2 1,17 Arable crops/fruits/grapes/ornamentals 3-5 l/ha 07;FiBL;Xgen;BCS 2,4 1,17 Arable crops/fruits/grapes/ornamentals 3-5 l/ha 7 1,32 Arable crops/vegetables/fruits/grapes 2-4 l/ha 07;FiBL;BCS 12,9 1,52 Arable crops/vegetables/fruits/grapes 3-5 l/ha 6 1,83 Arable crops/vegetables/fruits/grapes/ornamentals 1 l/ha 07;FiBL;Xgen 1,8 1,16 Arable crops/vegetables/fruits/grapes/ornamentals 2-3 l/ha 07;FiBL;Xgen;BCS 6,6 1,18 Arable crops/vegetables/fruits/grapes/ornamentals 2-3 l/ha 3 1,37 Arable crops/vegetables/fruits/grapes/ornamentals 2-4 l/ha 6,4 1,3 Arable crops/vegetables/fruits/grapes/ornamentals 2-4 l/ha 1,5 1,19 Arable crops/vegetables/fruits/grapes/ornamentals2-5 l/ha 07;FiBL;BCS 10 1,44 Arable crops/vegetables/fruits/grapes/ornamentals 2-4 l/ha 7-8 1,37 Arable crops/vegetables 0,25 l/ha 07;FiBL;Xgen 8 1,42 all cultures 2-10 l/ha 07;FiBL 9 1,74 all cultures 0,5-2 l/ha 07;FiBL;Xgen 1,5 1,17 all cultures 2-5 l/ha 07;FiBL;Xgen;BCS 5,5 1,16 all cultures 2-5 l/ha 10 1,58 Cereal 1-2 l/ha 2,9 1,26 Cereal 2-4 l/ha 1,5 Corn 2-3 l/ha 07 2,7 1,24 Corn 4-6 l/ha 20% 270 g/l 6,5 1,35 Fruits/Grapes: 2 3 l/ha 2,5% 32g/l 2% 32g/l 1% 15g/l 2,3% 30g/l 1,4% 19g/l 3,1% 44g/l 10,0% 150 g/l 1,6% 28 g/l 0,3% 4g/l 3,2% 44 g/l 19%; 286 g/l 13%; 214 g/l 1.1% 17 g/l 1,2% 13,3g/l 1% 16g/l 1% 13g/l 0,2% 2g/l 1,8% 24g/l 7,5% 120g/l Culture Specific Fertilizer for leaf application 9,2% 142 g/l 2,8% 32 g/l 0,2% 2,5 g/l 2% 32g/l 1,8% 23g/l 0,7% 9g/l 4,1% 63 g/l 0,5% 6 g/l 1,6% 20 g/l 0,2% 2,5g/l 0,2% 3g/l 0,4% 5,5g/l 1,5% 20g/l 0.05% 0.7 g/l 0,6% 7g/l 1,2% 20g/l 1,2% 17g/l 0,5% 7g/l 3,1% 40g/l 0,5% 7.6 g/l 4,8% 74 g/l 2% 22 g/l 4,6% 60 g/l 4,4% 56g/l 12% 200g/l 3% 40g/l 4% 52g/l 0,5% 8 g/l 0,13% 1 g/l 0,8% 10 g/l 0,1% 1,2g/l 0,3% 5g/l 0,3% 4,7g/l 0,1% 0,8g/l 0.02% 0.3 g/l 5,5% 70 g/l Culture Specific Fertilizer for seed treatment 0,6% 8g/l 0,4% 5g/l 0,2% 2,8g/l 2% 27g/l 0,5% 7g/l 0,4% 5g/l 3% 42g/l 3% 41g/l 4,1% 58g/l 0,1% 1,6g/l 0,1% 1,6g/l 1,6% 20g/l 6% 100g/l 3% 40g/l 3,1% 40g/l 0,6% 8g/l 1,5% 22g/l Biostimulators with nutrients 0,007% 0,2% 3 g/l 1,5 Fruits/Grapes 3-9 l/ha 1,5 Rapeseed 2-3 l/ha 07 3,5 1,15 Rapeseed 5-7 l/ha 8 1,3 Zitruspflanzen 2,5-3,5 l/ha x 1,2 200ml/100kg seeds 07;FiBL;Xgen x 1,6 100ml/100kg seeds 07;FiBL;Xgen x 1,25 200ml/t potato shoots 07;FiBL;Xgen x 1,3 200ml/100kg seeds 07;FiBL;Xgen x 1,37 200ml/100kg seeds 07;FiBL;Xgen x 1,4 200ml/100kg seeds 07;FiBL;Xgen 9,3 1,47 all cultures 2-4 l/ha 07;FiBL 10 1,62 all cultures 2-4 l/ha 07;FiBL In compliance with Council Regulation (EC) No 834/2007 on organic production (07) Input for organic agriculture listed by the Research Institute of Organic Agriculture (FiBL) Input for organic agriculture listed by InfoXgen (Xgen)

8 In compliance with Council Regulation (EC) No 834/2007 on organic production Plantosol ORGANIC NITROGEN FERTILIZER LIQUID 9 9 % organic bound nitrogen out of enzymatic hydrolyzed collagen Ground game avoid Plantosol! Mix 2-4 l 1:1 with water, leave it for 1-2 days and then spray. The active ingredient of the product and its effects: Amino acids are the building blocks of protein and of the growth hormone auxin, of carbohydrates, chlorophyll etc..they are absorbed in an excellent way via the leaf. If amino acids are spread on the leaf, the plant saves itself the energy consuming synthesis. In this manner the plant growth is supported especially during stress situations. General: Reduces stress in case of dryness and waterlogging: 2-3 l/ha as leaf fertilization. Improves efficacy of plant protection measures: ml/100 l application broth in addition to plant protection measures. Repels ground game (Roe dear - Capreolus capreolus L., Alpine ibex Capra ibex, Wild boars - Sus scrofa L., Hares Lepus spp., Rabbits - Oryctolagus cuniculus L. etc.): Mix per hectar 2-4 l Plantosol 1:1 with water and leave for 2-3 days at temperatures around 25 C until the mixture develops an unpleasant smell. Apply the mixture with further water to the crops you want to protect or drain flannels with the fermented Plantosol and hang up the flannels all around the area which has to be protected in a distance of 4 m to each other. After heavy rain a reapplication is recommended. Back carrier spray nozzle: 0.2-1% Manufacturer s instructions regarding miscibility must be observed when the product is added to a mixture containing plant protection products. Add Plantosol always diluted with water as last component. 1 l 10 I 200 l 1000 I Some amino acids are building blocks of auxins and therefore support cell division and root formation. Amino acids have net and adhesive properties and therefore improve the efficacy and tolerance of plant protection products and fertilizers. Density: 1,2 kg/l, ph = 5,5 Strawberries, vegetables, tobacco, tree nursery: For root formation and before new planting: Plunge the plant into a 1% solution or, to take root, water it with 5-10 l/ha 7-10 days after planting. Pip fruit: Before blooming period: 2 applications with l/ha. To reduce fruit russeting and against fruit falling before harvest: apply l/ha from the beginning of August 5-6 times. Stone fruit: For healthy growth as of blooming period: 3 times l/ha at an interval of 8 days. Against symptoms caused by sharka as of blooming period: 3 times l/ha at an interval of 30 days. Vine: To achieve uniform ripeness and must quality: 4 applications with 3-5 l/ha. Ornamental plants: For leaf quality and growth: 4 times ml per 100 l water. Listed as input in organic agriculture (InfoXgen). Apply according to the actual needs, following the requirement of the plant and the results of soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light. Temperatures between -5 C and +50 C allow storage for several years. 8

9 In compliance with Council Regulation (EC) No 834/2007 on organic production Bio-Plantosol ORGANIC NITROGEN FERTILIZER LIQUID 4 with plant origin 4 % organic bound nitrogen out of enzymatic hydrolysis of organic plant material With 17 % free amino acids. Enhances the development of both radicular and aerial parts of the plant. The active ingredient of the product and its effects: Amino acids are the building blocks of protein and of the growth hormone auxin, of carbohydrates, chlorophyll etc..they are absorbed in an excellent way via the leaf. If amino acids are spread on the leaf, the plant saves itself the energy consuming synthesis. In this manner the plant growth is supported especially during stress situations. General: Reduces stress in case of dryness and waterlogging: 2-3 l/ha as leaf fertilization. Improves efficacy of plant protection measures: ml/100 l application broth in addition to plant protection measures. Strawberries, vegetables, tobacco, tree nursery: For root formation and before new planting: Plunge the plant into a 1% solution or, to take root, water it with 5-10 l/ha 7-10 days after planting. Pip fruit: Before blooming period: 2 applications with l/ha. To reduce fruit russeting and against fruit falling before harvest: apply l/ha from the beginning of August 5-6 times. Some amino acids are building blocks of auxins and therefore support cell division and root formation. Amino acids have net and adhesive properties and therefore improve the efficacy and tolerance of plant protection products and fertilizers. Density: 1,1 kg/l, ph = 4 Stone fruit: For healthy growth as of blooming period: 3 times l/ha at an interval of 8 days. Against symptoms caused by sharka as of blooming period: 3 times l/ha at an interval of 30 days. Vine: To achieve uniform ripeness and must quality: 4 applications with 3-5 l/ha. Ornamental plants: For leaf quality and growth: 4 times ml per 100 l water. Listed as input in organic agriculture (InfoXgen, FiBL). Back carrier spray nozzle: 0.2-1% Manufacturer s instructions regarding miscibility must be observed when the product is added to a mixture containing plant protection products. Add Bio-Plantosol always diluted with water as last component. 1 l 10 I 200 l 1000 I Apply according to the actual needs, following the requirement of the plant and the results of soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light. Temperatures between -5 C and +50 C allow storage for several years. 9

10 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Booster ORGANIC NITROGEN FERTILIZER LIQUID 8 8% organic nitrogen. With humic, fulvic and amino acids, seaweed (Ascophyllum nodosum), natural nutrients such as P, K, Mg, Na, B, Cu, Fe, Mn, Mo, Zn, carbohydrates, fatty acids, vitamines A, B1, B2, B3, B6, B12, C, D3, E, K, and phytohormones in quantities well balanced for plants. The health boost for all crops - especially under unfavorable growth conditions. High vitality for all plants. As leaf fertilizer or in fertigation. The active ingredients of the product and their effects: Amino acids are the building blocks of protein and of the growth hormone auxin, of carbohydrates, chlorophyll etc.. They are absorbed in an excellent way via the leaf. If amino acids are spread on the leaf, the plant saves itself the energy consuming synthesis. In this manner, the plant growth is supported especially during stress situations. Some amino acids are building blocks of auxins and therefore support cell division and root formation. Humic and fulvic acids as well as sap of seaweed support the natural resistance of the plant and stimulates the uptake of soil nutrients via the roots. Density: 1,2 kg/l, ph = 5 Vine: For the light building of bunches of grapes, uniform ripeness and high must quality. Leaf fertilization before bloom: 2 times l/ha at an interval of 8-10 days; after bloom (when blossom caps have been completely dropped): 0.5 l/ha. Fertigation: in new and older plants, after the start of vegetation period use 3 l/ha, to be repeated 2-3 times at intervals of days. Stone fruit: Leaf fertilization: for healthy growth as of blooming period: 3 times l/ha at an interval of 8 days. Against symptoms caused by sharka as of blooming period: 3 times l/ha at an interval of 20 days. Pip fruit: Leaf fertilization: before blooming period: 2-3 applications with l/ha; from first fruit appearing until fruit growth 2-3 times 3 l/ha. Ornamental plants and tree nursery: For leaf quality and growth. Leaf fertilization: after bedding out l/ha. Fertigation: after bedding out 0.3 l/1000m 2. Strawberries, vegetables: For root formation and before new planting: Plunge the plant into a 1% solution. Leaf fertilization: 7-10 days after planting to start growth apply 0.3 l/ha; before and after bloom apply 0.5 l/ha. Fertigation: After planting 3 l/ha; during bloom 3 l/ha, during fruit growth 2-3 times 3 l/ha. Back carrier spray nozzle: % PhytoGreen -Booster can be mixed with usual plant protection products. However, since it is not possible to foresee all instances that may occur in practice it is in any case recommended to perform a trial first mixing the products intended to be used. 1 l 5 l 200 l Apply according to the actual needs, following the requirement of the plant and the results of soil analysis. Don t exceed recommended quantities. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 10

11 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -BioBooster ORGANIC NITROGEN FERTILIZER LIQUID 4 Vegetable hydrolysed protein with cold-pressed seaweed sap 4% organic nitrogen. With amino acids and peptides, seaweed (Ascophyllum nodosum), natural nutrients such as P, K, Mg, Na, B, Cu, Fe, Mn, Mo, Zn, carbohydrates, fatty acids, vitamines A, B1, B2, B3, B6, B12, C, D3, E, K, and phytohormones in quantities well balanced for plants. Guarantees high crop vitality. The health boost for all crops - especially under unfavorable growth conditions. As leaf fertilizer or in fertigation. The active ingredient of the product and its effects: Amino acids are the building blocks of protein and of the growth hormone auxin, of carbohydrates, chlorophyll etc.. They are absorbed in an excellent way via the leaf. If amino acids are spread on the leaf, the plant saves itself the energy consuming synthesis. In this manner, the plant growth is supported especially during stress situations. Some amino acids are building blocks of auxins and therefore support cell division and root formation. Sap of seaweed, especially Ascophyllum nodosum and Chondrus crispus, supports the natural resistance of the plant and fosters the uptake of soil nutrients via the roots. Density: 1,1 kg/l, ph = 5,5 Vine: For the light building of bunches of grapes, uniform ripeness and high must quality. Leaf fertilization before blooming: 2 times l/ha at an interval of 8-10 days; after bloom (when blossom caps have been completely dropped): 0.5 l/ha. Fertigation: in new and older plants, after the start of vegetation period use 3 l/ha, to be repeated 2-3 times at intervals of days. Stone fruit: Leaf fertilization: for healthy growth as of blooming period: 3 times l/ha at an interval of 8 days. Against symptoms caused by sharka as of blooming period: 3 times l/ha at an interval of 20 days. Pip fruit: Leaf fertilization: before blooming period: 2-3 applications with l/ha; from first fruit appearing until fruit growth 2-3 times 3 l/ha. Ornamental plants and tree nursery: For leaf quality and growth. Leaf fertilization: after bedding out l/ha. Fertigation: after bedding out 0.3 l/1000m 2. Strawberries, vegetables: For root formation and before new planting: Plunge the plant into a 1% solution. Leaf fertilization: 7-10 days after planting to start growth apply 0.3 l/ha. Fertigation: After planting 3 l/ha; during bloom 3 l/ha, during fruit growth 2-3 times 3 l/ha. Back carrier spray nozzle: % PhytoGreen -BioBooster can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 1 l 5 l 200 l Apply according to the actual needs, following the requirement of the plant and the results of soil analysis. Don t exceed recommended quantities. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 11

12 ASKAPHY27 EC FERTILIZER NK FERTILIZER LIQUID 3-18 with trace elements The plus for nutrient supply, healthy growth and optimal photosynthesis. 3% N as carbamide nitrogen (42 g/l), 18% K 2 O, water-soluble potassium (252 g/l), contains additionally 11,7% phosphorous in form of phosphonate and important trace elements such as 0.01% B, 0.02% Cu*, 0.02% Fe*, 0.01% Mn*, 0.001% Mo, 0.01% Zn* (*as chelates from EDTA). ASKAPHY27 is a special formulation of carbamide nitrogen, potassium phosphite, and trace elements to be applied via the leaf. Due to the optimal formulation highest uptake of nutrients and excellent compatibility to the plant are guaranteed. Density: 1,37 kg/l, ph = 5 General: ASKAPHY 27 is applied as foliar fertilizer. Young plants and seedlings can be bathed before planting for 15 minutes in a 0,5% solution. Vine: Several leaf applications using 2-3 l/ha as of pre-blossom to pea-sized fruits. Hop: Several leaf applications with % according to requirements. Strawberries: Band spraying / watering with each l/ha (according to row distance) and 1-2 leaf treatments with 2-3 l/ ha each. Band spraying after planting and in autumn, leaf treatment in springtime as of pre-blossom. Back carrier spray nozzle: % ASKAPHY27 can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of crops intended to be treated. Applying mixtures add the products subsequently, with ASKAPHY27 being the last one. 1 l 10 l 200 l 1000 l Fruit vegetable: Several leaf applications using 2-3 l/ha as of bloom start. Ornamental plants: Several leaf applications with % according to requirements. Mediterranean plants and citrus: Several leaf applications with % according to requirements. Cabbage, bulb and leafy vegetables: Several leaf applications with 2-3 l/ha according to requirements. Do not apply during blooming period. Apply according to the actual needs, following the requirement of the plant and the results of soil analysis. Don t exceed recommended quantities. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 12

13 PhytoGreen -NPK EC FERTILIZER NPK FERTILIZER LIQUID with trace elements The well balanced nutrient supply for plants. 12% N (145 g nitrogen/l) 4% P 2 O 5 (48 g water soluble phosporus/l) 6% K 2 O (73 g water soluble potassium oxide/l) Berries: As a foliar application: 0,5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pip fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: Several foliar applications with 0,2-0,4%. 0,01% Boron (B), 0,002% Copper (Cu)*, 0,02% Iron (Fe)*, 0,01% Manganese (Mn) *, 0,001% Molybdenum (Mo), 0,002 % Zink (Zn)* (*as chelate from EDTA) Density: 1,2 kg/l, ph = 5 Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with 0,2-0,4%. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Under glass: several foliar and soil applictaions with 0,3-0,5%. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-leaf-stage until meeting across the rows. In all crops: As a soil application: 0,3-0,5%. Back carrier spray nozzle: % PhytoGreen -NPK can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 1 l 10 l 200 l 1000 l PhytoGreen NPK can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutient demands of the culture as well as soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 13

14 PhytoGreen -NPK EC FERTILIZER NPK FERTILIZER LIQUID with trace elements NPK fertilizer with trace elements. The well balanced nutrient supply for plants. 8 % N (97 g/l nitrogen) 3,8 % carbamide N, 1,8% ammonium N, 2,4 % nitrate N 8 % P 2 O 5 (97 g/l water soluble phosporus) 6% K 2 O (73 g/l water soluble potassium) Berries: As a foliar application: 0,5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pip fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: Several foliar applications with 0,2-0,4%. 0.01% B, 0.005% Cu*, 0.01% Mn*, 0.01% Zn* (*as chelate from EDTA) Density: 1,2 kg/l Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with 0,2-0,4%. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Under glass: several foliar and soil applictaions with 0,3-0,5%. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-leaf-stage until meeting across the rows. In all crops: As a soil application: 0,3-0,5%. Back carrier spray nozzle: % PhytoGreen -NPK can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 1 l 10 l 200 l 1000 l PhytoGreen NPK can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutient demands of the culture as well as soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 14

15 PhytoGreen -NPK EC FERTILIZER NPK FERTILIZER LIQUID NPK fertilizer with high phosphorous content. 5 % N (65 g/l nitrogen) 20 % P 2 O 5 (260 g/l water soluble phosporus) 5% K 2 O (65 g/l water soluble potassium oxide) Density: 1,3 kg/l, ph = 1,2 Berries: As a foliar application: 0,5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pip fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: Several foliar applications with 0,2-0,4%. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with 0,2-0,4%. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Under glass: several foliar and soil applictaions with 0,3-0,5%. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-leaf-stage until meeting across the rows. In all crops: As a soil application: 0,3-0,5%. Back carrier spray nozzle: % PhytoGreen -NPK can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 20 l 200 l 1000 l PhytoGreen -NPK can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutient demands of the culture as well as soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 15

16 PhytoGreen -NPK EC FERTILIZER NPK FERTILIZER LIQUID with trace elements NPK fertilizer with high phosphorous content and trace elements. The well balanced nutrient supply for plants. 7 % N (93 g/l nitrogen in total) 5,9 % carbamide N, 1,1 % nitrate N 21 % P 2 O 5 (279 g/l water soluble phosporus) 7% K 2 O (93 g/l water soluble potassium oxide) water soluble trace elements: 0,02 % B (0,26 g/l), 0,05 % Fe (0,67 g/l), 0,05 % Mn (0,67 g/l) Density: 1,33 kg/l, ph = 1,1 Berries: As a foliar application: 0,5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pip fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0,5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: Several foliar applications with 0,2-0,4%. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with 0,2-0,4%. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Under glass: several foliar and soil applictaions with 0,3-0,5%. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-leaf-stage until meeting across the rows. In all crops: As a soil application: 0,3-0,5%. PhytoGreen -NPK can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 10 l 200 l 1000 l PhytoGreen -NPK can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutient demands of the culture as well as soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 16

17 PhytoGreen -NPK Plus EC FERTILIZER NPK FERTILIZER LIQUID with magnesium and trace elements A unique Nitrogen/Phosphorus/Potassium formulation blended with secondary nutrients, trace elements and organic acids. 12.0% w/v N (120 g/l nitrogen) 8.0% w/v P 2 O 5 (80 g/l water soluble phosporus) 4.0% w/v K 2 O (40 g/l water soluble potassium) 2.4% w/v MgO (water soluble magnesium) 0.04% w/v B (water soluble boron) 0.008% w/v Cu (water soluble copper) 0.007% w/v Fe (water soluble iron) 0.228% w/v Mn (water soluble manganese) % w/v Mo (water soluble molybdenum) 0.009% w/v Zn (water soluble zinc) Density: 1,22 kg/l, ph = 2,2 PhytoGreen -NPK Plus is suitable for use in a wide range of crops providing a source of rapidly absorbed nutrients during periods of rapid growth and development or at times of crop stress. PhytoGreen -NPK Plus is formulated with its own adjuvant system for improved tank-mixing compatibility, uptake and translocation of the metal ions within the plant. Timing: Apply as and when required to provide the plant with additional nutrients in adverse growing conditions, when the crop is under stress and on crops with high yield/quality potential. Application rate: Use 2 l/ha in 200 litres of water. Repeat every 7-14 days as necessary. PhytoGreen -NPK Plus can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 10 l 200 l 1000 l PhytoGreen -NPK Plus can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutient demands of the culture as well as soil analysis. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 17

18 PhytoGreen -NP-Liquid 7-18 EC FERTILIZER NP FERTILIZER SOLUTION 7-18 Water soluble nutrient solution with nitrogen and phosphorous. 7 % N total nitrogen (84 g/l as ammonium-n) 18 % P 2 O 5 water soluble phosporus (216 g/l) Product details: Appearance: Clear, brownish liquid of urea and diammoniumphosphate (DAP) in water. Technische Daten: Density: ca. 1,2 t/m 3 ph: 8 Filtration residue: max. 0,01% Further information: No hazardous good (guideline 67/548/EWG l. 0 C - 80 C 18

19 PhytoGreen -PK Plus EC FERTILIZER PK FERTILIZER LIQUID 11-7 with magnesium and manganese PK fertilizer with magnesium and manganes for quick nutrient supply especially at the beginning of the vegetation period. 11 % P 2 O 5 (132 g/l water soluble phosporus) 7% K 2 O (84 g/l water soluble potassium) 1% MgO (12 g/l water soluble magnesium oxide) 0,8% Mn (9,6 g/l water soluble manganese) All nutrients in PhytoGreen -PK Plus are directly available for plant uptake. It contains low-molecular weight carboxylic acids. This kind of acids exist in a natural way in plants (e. g. formic, tartaric or citric acid). Carboxylic acids promote growth and vitality of the culture as well as crop quality. Density: 1,2 kg/l, ph= 2,7 PhytoGreen -PK Plus has to be brought out as a foliar application with 0,5% (500 ml PhytoGreen -PK Plus/ 100 l water) as soon as enough leaves are available. Adapt water amount to a throughout coverage of the full leave area. Especially at the beginning of the vegetation period, PhytoGreen -PK Plus enhances root development very effectively. Repeat treatment due to nutrient demands of the culture. In general, 1-2 applications are recommended. PhytoGreen -PK Plus can be applied in all spray droplet sizes. The treatment is recommended for the early morning, the late evening or on cloudy days. Apply on dry leaves and at least two hours before irrigation or rain. PhytoGreen -PK Plus can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 10 l 200 l 1000 l In a closed container, protected from sun light, not below 0 C. 19

20 PhytoGreen -HiPhos EC FERTILIZER PK FERTILIZER SOLUTION WITH MAGNESIUM 31-5 (5,6) Liquid foliar fertiliser for application to agricultural crops. 30,6 % P 2 O 5 (440 g/l water soluble phosphate) 5,1 % K 2 O (74 g/l water soluble potassium oxide) 5,6 % MgO (80 g/l water soluble magnesium oxide) Potatoes: To encourage tuber numbers, apply 10 l/ha in at least 200 litres of water at tuber initiation. To encourage bulking, apply 5 l/ha in at least 200 litres of water at the onset of bulking and repeat at least once during bulking. The timing of the 2nd application should be based on tissue analysis and should not be less than 10 days after the 1st. Cereals: Apply 5 l/ha in at least 200 litres of water at tillering and repeat at day intervals as required. An application between ear emergence and the end of flowering may also be beneficial. Peas and beans: Apply 5 l/ha in at least 200 litres of water when the crop is cm high and repeat after days. Oilseed Rape: Apply l/ha in at least 200 litres of water. Apply in the autumn when the crop has 6-8 leaves and repeat in the spring at early stem extension. Sugarbeet: Apply 5 l/ha in at least 200 litres of water at the 4-6 leaf stage. Repeat at day intervals as required. Maize: Apply l/ha in at least 200 litres of water at the 4-8 leaf stage. Repeat at day intervals if required. PhytoGreen -HiPhos can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Always consider nutient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 5 C. 20

21 PhytoGreen -NPK Complete EC FERTILIZER NPK FERTILIZER with Magnesium, Sulphur and trace elements A foliar-applied soluble micronutrient blend for use in agriculture. 20,0 % N total nitrogen (0.88% as nitrate, 6.23% as ammonium and 12.9% as carbamide) 8,0 % P 2 O 5 (water soluble phosporus) 14,0 % K 2 O (water soluble potassium oxide) 9,7 % S (water soluble sulphur) 2,0 % MgO (water soluble magnesium oxide) PhytoGreen -NPK Complete is a carefully formulated fully soluble blend of NPK and micronutrients. It is suitable for optimising nutrient balance in a wide range of crops. PhytoGreen -NPK Complete may be used as a routine nutrient source for maintaining healthy crop growth and development and also to provide a source of rapidly absorbed additional nutrients at a time of crop stress or during periods of particularly rapid growth and development. 0,26 % Manganese*, 0,20% copper*, 0,14 % zinc*, 0,04% boron, 0,02% iron*, 0,006% molybdenum. Rates of use: Rates of use: kg PhytoGreen -NPK Complete/ha in at least 200 l/ha water. Timing: Apply PhytoGreen -NPK Complete when required or as indicated by the results of tissue analysis, once the crop has sufficient leaf area present to absorb the spray (e.g. the 3-leaf stage in cereals). Repeat at 7-14 day intervals as required. PhytoGreen -NPK Complete can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 1 kg 10 kg 20 kg In a closed container, protected from sun light, not below 0 C. 21

22 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -NK Bio ORGANIC NK-FERTILIZER LIQUID Ecological NK fertilizer. Provides nutrients directly. 4,0% N (52 g/l organic nitrogen) 6,5% K 2 O (84 g/l potassium oxide) 0,1% P 2 O 5 (1,3 g/l phosphate), 1,0% S (13 g/l sulphur), 1,1% CaO (14 g/l calcium oxide). Generals: PhytoGreen -NK Bio can be used for soil application in any culture. When using conventional irrigation technology, the concentration should not exceed 5 %. As direct soil application in orchards and viticulture the product can also be applied in higher concentration. The use in hydroponics is not recommended. PhytoGreen -NK Bio can also be used for foliar appication but may cause spraying stains. Berries: Soil application: max. 5%. Foliar application: 0.5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pomaceous fruit: Soil application: max. 5%. Foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: Soil application: max. 5%. Foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. PhytoGreen -NK Bio can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Raw material: sugar beet molasses Density: app. 1,3 kg/l Maize: Soil application: max. 5%. Foliar application: 1-2 applications with 4-6 l/ha. Vine: Soil application: max. 5%. Foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: Soil application: max. 5%. Foliar application: % from the beginning of vegetation up, to be repeated several times. Vegetables: Soil application: max. 5%. Foliar application: for initial development: 2-4 applications from 2-leaf-stage up with %. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Cereals: Soil application: max. 5%. Foliar application: 1-2 times 4-8 l/ha from beginning of vegetation up. Sugar beet: Soil application: max. 5%. Foliar application: 1-2 times 4-6 l/ha from 5-6-leaf-stage until meeting across the rows. Listed as input in organic agriculture (InfoXgen, FiBL). PhytoGreen -NK Bio can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutrient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 0 C 22

23 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -NPK Bio ORGANIC MINERAL NPK-FERTILIZER LIQUID with micronized trace elements With seaweed sap, vitamins, auxins, and other phytohormons. Ecological NPK fertilizer. The well-balanced nutrient supply for all plants. 2% N (33 g/l organic nitrogen) 5% P 2 O 5 (67 g/l phosphate) 8% K 2 O (112 g/l potassium oxide) with 5% calcium (80 g/l) ; 2% sulphur (30 g/l), 0.1% magnesium (1,5 g/l); 0.1% manganese (1,5 g/l); 0.1% iron (1,5 g/l); % boron (0,5 mg/l); 0.1% copper (1,5 g/l); 0.1% zinc (1,5 g/l); Vitamins A, B1, B2, B3, B6, B12, C, D3, E and K. Generals: PhytoGreen -NPK Bio can be applied with the irrigation water ( %). PhytoGreen -NPK Bio can also be used for foliar appication (0.4-1%) but may cause spraying stains. The use in hydroponics is not recommended. Berries: As a foliar application: 0.5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pomaceous fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Back carrier spray nozzle: % PhytoGreen -NPK Bio can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Maize: For nutrient supply and output 1-2 times 4-6 l/ha. Vine: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: As a foliar application: % from the beginning of vegetation up, to be repeated several times. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with %. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-6-leaf-stage until meeting across the rows. Listed as input in organic agriculture (InfoXgen, FiBL). PhytoGreen -NPK Bio can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutrient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 0 C 23

24 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -NPK Bio ORGANIC MINERAL NPK-FERTILIZER LIQUID with micronized trace elements With seaweed sap, vitamins, auxins, and other phytohormons. Ecological NPK fertilizer. The well-balanced nutrient supply for all plants. 3% N (38 g/l organic nitrogen) 4% P 2 O 5 (51 g/l phosphate) 3% K 2 O (38 g/l potassium oxide) 6.2 % calcium oxide (80 g/l), 1.0% sulphur (12 g/l), 0.3% magnesium (3 g/l), 0.1% copper (1,5 g/l), 0.2% iron (3 g/l), 0.2% manganese (3 g/l), 0.2% zinc (3 g/l); Vitamins A, B1, B2, B3, B6, B12, C, D3, E and K. Generals: PhytoGreen -NPK Bio can be applied with the irrigation water ( %). PhytoGreen -NPK Bio can also be used for foliar appication (0.4-1%) but may cause spraying stains. The use in hydroponics is not recommended. Berries: As a foliar application: 0.5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pomaceous fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Maize: For nutrient supply and output 1-2 times 4-6 l/ha. Back carrier spray nozzle: % PhytoGreen -NPK-Bio can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Vine: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: As a foliar application: % from the beginning of vegetation up, to be repeated several times. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with %. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-6-leaf-stage until meeting across the rows. Listed as input in organic agriculture (InfoXgen, FiBL). PhytoGreen -NPK Bio can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutrient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 0 C 24

25 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -NPK Bio ORGANIC MINERAL NPK-FERTILIZER LIQUID with micronized trace elements With seaweed sap, vitamins, auxins, and other phytohormons. Ecological NPK fertilizer. The well-balanced nutrient supply for all plants. 4% N (50 g/l organic nitrogen) 1% P 2 O 5 (13 g/l phosphate) 5% K 2 O (64 g/l potassium oxide) 1,5% calcium (20 g/l); 1% sulphur (14 g/l); 0.1% magnesium (4 g/l); 0.1% copper (1,3 g/l); 0.1% manganese (1,3 g/l); 0.1% iron (1,3 g/l); % boron (5 mg/l); 0.1% zinc (1,3 g/l). Vitamins A, B1, B2, B3, B6, B12, C, D3, E and K. Generals: PhytoGreen -NPK Bio can be applied with the irrigation water ( %). PhytoGreen -NPK Bio can also be used for foliar appication (0.4-1%) but may cause spraying stains. The use in hydroponics is not recommended. Berries: As a foliar application: 0.5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pomaceous fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Maize: For nutrient supply and output 1-2 times 4-6 l/ha. Vine: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: As a foliar application: % from the beginning of vegetation up, to be repeated several times. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with %. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-6-leaf-stage until meeting across the rows. Back carrier spray nozzle: % PhytoGreen -NPK-Bio can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Listed as input in organic agriculture (InfoXgen, FiBL). PhytoGreen -NPK Bio can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutrient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 0 C 25

26 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -NPK Bio ORGANIC MINERAL NPK-FERTILIZER LIQUID with micronized trace elements With seaweed sap, vitamins, auxins, and other phytohormons. Ecological NPK fertilizer. The well-balanced nutrient supply for all plants. 70 g/l N (5,7% organic nitrogen) 20 g/l P 2 O 5 (1,7% phosphate) 20 g/l K 2 O (1,7% potassium oxide) 2.1 % calcium (30 g/l); 0.3 % sulphur (9 g/l); 0.1% magnesium (1.3 g/l); 0.1% manganese (1.3 g/l); 0.1% iron (1.3 g/l); % boron (6 mg/l); 0.1% copper (1.3 g/l); 0.1% zinc (1.5 g/l). Vitamins A, B1, B2, B3, B6, B12, C, D3, E and K Generals: PhytoGreen -NPK Bio can be applied with the irrigation water ( %). PhytoGreen -NPK Bio can also be used for foliar appication (0.4-1%) but may cause spraying stains. The use in hydroponics is not recommended. Berries: As a foliar application: 0.5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pomaceous fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Maize: For nutrient supply and output 1-2 times 4-6 l/ha. Vine: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: As a foliar application: % from the beginning of vegetation up, to be repeated several times. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with %. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-6-leaf-stage until meeting across the rows. Back carrier spray nozzle: % PhytoGreen -NPK-Bio can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Listed as input in organic agriculture (InfoXgen, FiBL). PhytoGreen -NPK Bio can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutrient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 0 C 26

27 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -NPK Bio ORGANIC MINERAL NPK-FERTILIZER LIQUID with micronized trace elements With seaweed sap, vitamins, auxins, and other phytohormons. Ecological NPK fertilizer. The well-balanced nutrient supply for all plants. 80 g/l N (5,9% organic nitrogen) 30 g/l P 2 O 5 (2,3% phosphate) 40 g/l K 2 O (3,0% potassium oxide) 3% calcium (40 g/l); 0.6% sulphur (8 g/l); 0.1% magnesium 1.4 g/l); 0.1% manganese (1.4 g/l); 0.1% iron (1.4 g/l); % boron (5 mg/l); 0.1% copper (1.4 g/l); 0.1% zinc (1.4 g/l). Vitamins A, B1, B2, B3, B6, B12, C, D3, E and K Generals: PhytoGreen -NPK Bio can be applied with the irrigation water ( %). PhytoGreen -NPK Bio can also be used for foliar application (0.4-1%) but may cause spraying stains. The use in hydroponics is not recommended. Berries: As a foliar application: 0.5-1% at beginning of vegetation, potentially reapply. Do not apply during blooming period! Pomaceous fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. In rusting sensitive varieties do not apply during periods critical for rust development. Stone fruit: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Maize: For nutrient supply and output 1-2 times 4-6 l/ha. Vine: As a foliar application: 0.5-1% from the beginning of vegetation up, potentially reapply. Do not apply during blooming period. Ornamental plants, mediterranean plants and citrus: As a foliar application: % from the beginning of vegetation up, to be repeated several times. Vegetables: For initial development: 2-4 applications from 2-leaf-stage up with %. For nutrient supply and output: 2-4 applications with 5-8 l/ha during main growth period. Cereals: For nutrient supply and output: 1-2 applications with 4-8 l/ha from beginning of vegetation up. Sugar beet: For nutrient supply and output: 1-2 applications with 4-6 l/ha from 5-6-leaf-stage until meeting across the rows. Back carrier spray nozzle: % PhytoGreen -NPK-Bio can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 1 l 10 l 200 l 1000 l Listed as input in organic agriculture (InfoXgen, FiBL). PhytoGreen -NPK Bio can be applied in all spray droplet sizes. As a foliar application the treatment is recommended for the early morning, the late evening or on cloudy days. Always consider nutrient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 0 C 27

28 In compliance with Council Regulation (EC) No 834/2007 on organic production Phytosol CO 2 foliar fertilizer suspension made of micronized calcium carbonate (CaCO 3 ) 19% Ca (286 g Ca/l), 0,2 % Silicon dioxide (3 g SiO 2 /l), 0,007% Iron (0,1 g Fe/l) The first pure ready for use suspension of calcium carbonate for CO 2 fertilization. Garantees high yields in combination with leaf analysis. The active ingredient of the product and its effects: Phytosol is a pure calcite carbonate from natural limestone deposits, suitable for use in organic farming, harmless to humans and animals and not hazardous to water. Due to its formulation as suspension it is very easy in handling highlighted by: No dust development Very good miscibility Excellent weting and sticking No phytotoxicity Phytosol particles, sprayed finely onto the leaf surface, are taken up directly through the stomata and converted into carbon dioxide. In this way PHYTO- SOL can considerably increase the photosynthesis rate. The carbon dioxide fertilization reduces water requirement of the culture. With Phytosol the plants are able to keep the stomata closed longer in case of water stress. In combination with leaf analysis and potentially additional fertilization with other nutrients, Phytosol increases yield, growth, vitality and quality of the crop. General: Phytosol has to be applied as fine spray onto the leaf surface with 3-4 l/ha in l water/ha. Depending on the culture 2-4 applications in intervals of days are recommended. The spraying nozzle diameter should not go below 0,3 mm, optimal spraying pressure ranges from 3 to 4 bar. Phytosol should be applied at least 2 to 4 hours before raining or irrigation. Listed as input in organic agriculture (FiBL). Phytosol can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 28

29 In compliance with Council Regulation (EC) No 834/2007 on organic production Phytosol -Duo CO 2 foliar fertilizer suspension made of micronized Dolomite (MgCa(CO 3 ) 2 ) 13 % Calcium (214 g Ca/l) and 7,5 % Magnesium (120 g Mg/l) Provides Calcium and Magnesium in one suspension. For CO 2 fertilization. Garantees high yields in combination with leaf analysis. The active ingredient of the product and its effects: Phytosol -Duo is a made out of micronized dolomite rock, suitable for use in organic farming, harmless to humans and animals and not hazardous to water. Due to its formulation as suspension it is very easy in handling highlighted by: No dust development Very good miscibility Excellent weting and sticking No phytotoxicity Phytosol -Duo particles, sprayed finely onto the leaf surface, are taken up directly through the stomata and converted into Magnesium and Calcium ions and carbon dioxide. In this way Phytosol -DUO can considerably increase the photosynthesis rate. The carbon dioxide fertilization reduces water requirement of the culture. With Phytosol -DUO the plants are able to keep the stomata closed longer in case of water stress. In combination with leaf analysis and potentially additional fertilization with other nutrients, Phytosol -Duo increases yield, growth, vitality and quality of the crop. Phytosol -Duo has to be applied as fine spray onto the leaf surface with 3-4 l/ha in l water/ha. Depending on the culture 2-4 applications in intervals of days are recommended. The spraying nozzle diameter should not go below 0,3 mm, optimal spraying pressure ranges from 3 to 4 bar. Phytosol -Duo should be applied at least 2 to 4 hours before raining or irrigation. Listed as input in organic agriculture (FiBL). Phytosol -Duo can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 29

30 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Algae extract BIOSTIMULATOR Seaweed sap Supports resistance and resistibility to parasites, to fungal diseases and other pathogens. The active ingredient of the product and its effects: Pure juice extracted from live harvest brown and red seaweed. It contains natural nutrients such as N, P, K, Mg, Na, B, Cu, Fe, Mn, Mo, Zn, carbohydrates, fatty acids, amino acids, vitamins A, B1, B2, 83, B6, B12, C, D3, E and K, phytohormones and auxins at a quantity which is well balanced for plants. General: To generally strengthen, to support metabolic processes, to reinforce resistance and resistibility: 2-5 l/ha as leaf fertilisation. Strawberries: 2 applications with 2-3 l/ha from blooming period until harvest every 14 days. Pip fruit: Leaf development, fruit setting, yield, development of fruit buds: l/ha during full flowering, finish flowering, post flowering and at hazelnut size. To achieve a plain shell and against greasiness: 2 applications with 2-3 l/ha as of hazelnut size. Stonefruit: Resistance to diseases: 2 applications with 2-3 l/ha from fruit setting until harvest. Vine: To achieve uniform ripeness and must quality: 2-3 l/ha after sprouting until the grapes have reached their full size every 14 days. Fruiting vegetable, root and tuber crops, brassica, green and bulb vegetables: Resistance to diseases: 2 applications with 2-3 l/ha from emerging and/or planting. Potatoes: Resistance to diseases: 2 applications with 2-3 I/ha from emerging. Ornamental plants: Leaf quality and growth: ml per 100 I water every 14 days. Listed as input in organic agriculture (FiBL). PhytoGreen -Algae extract can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l In a closed container, protected from sun light. Temperatures between 0 C and +30 C allow storage for several years. 30

31 In compliance with Council Regulation (EC) No 834/2007 on organic production AminoAlg BIOSTIMULATOR Seaweed sap combined with amino acids Supports resistance and resistibility to parasites and fungal diseases. Enhances stress tolerance of the culture. The active ingredient of the product and its effects: The seaweed extract contains natural nutrients, carbohydrates, fatty acids, vitamins, auxins and other phytohormones at a quantity which is well balanced for plants. Amino acids are the building blocks of protein and of the growth hormone auxin, of carbohydrates, chlorophyll etc..they are absorbed in an excellent way via the leaf. If amino acids are spread on the leaf, the plant saves itself the energy consuming synthesis. In this manner the plant growth is supported especially during stress situations. General: Reduces stress in case of dryness and waterlogging: 2-3/ha as leaf fertilization. Improves efficacy of plant protection measures: ml in addition to plant protection measures. Strawberries, vegetables, tobacco, tree nursery: For root formation and before new planting: Plunge the plant into a 1% solution or, to take root, water it with 5-10 l/ha 7-10 days after planting. Pip fruit: Leaf development, fruit setting, yield, development of fruit buds: l/ha during full flowering, finish flowering, post flowering and at hazelnut size. To achieve a plain shell and against greasiness: 2 applications with 2-3 l/ha as of hazelnut size. Back carrier spray nozzle % AminoAlg can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Stonefruit: For healthy growth as of blooming period: 3 times l/ha at an interval of 8 days. Against symptoms caused by sharka as of blooming period: 3 times l/ha at an interval of 30 days. Vine: To achieve uniform ripeness and must quality: 4 applications with 3-5 l/ha. Ornamental plants: Leaf quality and growth: 4 times ml per 100 I water. Listed as input in organic agriculture (FiBL). Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 2 C. 31

32 In compliance with Council Regulation (EC) No 834/2007 on organic production Bio-AminoAlg BIOSTIMULATOR Vegetable hydrolysed protein with cold-pressed seaweed sap Raw materials are to 100% plant derived. Supports resistance and resistibility to parasites and fungal diseases. Enhances stress tolerance of the culture. The active ingredient of the product and its effects: The seaweed extract contains natural nutrients, carbohydrates, fatty acids, vitamins, auxins and other phytohormones at a quantity which is well balanced for plants. Amino acids are the building blocks of protein and of the growth hormone auxin, of carbohydrates, chlorophyll etc..they are absorbed in an excellent way via the leaf. If amino acids are spread on the leaf, the plant saves itself the energy consuming synthesis. In this manner the plant growth is supported especially during stress situations. General: Reduces stress in case of dryness and waterlogging: 2-3/ha as leaf fertilization. Improves efficacy of plant protection measures: ml in addition to plant protection measures. Strawberries, vegetables, tobacco, tree nursery: For root formation and before new planting: Plunge the plant into a 1% solution or, to take root, water it with 5-10 l/ha 7-10 days after planting. Pip fruit: Before blooming period: 2 applications with l/ha. To reduce fruit russeting and against fruit falling before harvest: Apply l/ha from the beginning of August 5-6 times. Stonefruit: For healthy growth as of blooming period: 3 times l/ha at an interval of 8 days. Against symptoms caused by sharka as of blooming period: 3 times l/ha at an interval of 30 days. Vine: To achieve uniform ripeness and must quality: 4 applications with 3-5 l/ha. Ornamental plants: Leaf quality and growth: 4 times ml per 100 I water. Listed as input in organic agriculture (InfoXgen, FiBL). Back carrier spray nozzle % AminoAlg can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 2 C. 32

33 In compliance with Council Regulation (EC) No 834/2007 on organic production BlackHum BIOSTIMULATOR (Plant Resistance Improver LSN /00) 20% humic and fulvic acids, both for soil and foliar application. Very high efficiency with small application rate. Supports resistance and resistibility to fungal diseases. Enforces the epidermis of the leaves, supports root formation, improves the vitality and preserves the health of economic plants. Lowers the soil fatigue. Accelerates the uptake of nutrients. The active ingredients of the product and their effects: Humic and fulvic acids improve the uptake of nutrients and stimulate the generation of plant-own enzymes. Thereby they increase the resistibility in situations of stress such as drought, cold and affection by illness, and they support the generation of sugar and starch. Density: 1,1 kg/l, ph = 5,4 General: For the general invigouration, improvement of nutrient uptake, promotion of microorganisms and metabolism, stimulation of root formation, enforcement of resistance and resisitibility: apply l/ha and year via the soil or several times 250 ml BlackHum/100 l water via the leaves. Vine: To prevent botrytis, to improve the uptake of iron: several foliar applications with 1 l BlackHum/ha as off 5-leaves-stage until grapes have reached their full size. Pomaceous and stone fruit: To support resistance: several foliar applications before blossom with 1 l BlackHum/ ha. By a stimulation of the plant-own resistance the onset of mildew and rot of fruits may be reduced. Potatoes: For resistance to diseases, to support combat against blight: several foliar applications with 2 l BlackHum/ha as of crop meeting across the rows, to be repeated after about 14 days. Back carrier spray nozzle % In a closed container, protected from sun light. Temperatures between -5 C and +25 C allow storage for several years. 1 l 10 I 200 l 1000 l Strawberries, vegetables, tobacco, tree nursery: For general invigoration, promotion of metabolism, strengthening of resistance and resistibility: apply 1 l Black- Hum/ha with l water as off pre-blossom and repeat 2-3 times according requirements until fruit coloring. Fruiting vegetable, root and tuber crops, brassica, green and bulb vegetables: For resistance to diseases, start of growth and quality: several foliar applications at intervals of 8-10 days using 1 l BlackHum/ha as of beginning of vegetation. Maize: To improve rooting and growth, disease resistance: several foliar applications using 2 l BlackHum/ha as of crop meeting across the rows, to be repeated after about 14 days. Sugar beet: To improve the generation of sugar, to stabilise the output, to stimulate the synthesis of invertase, and to improve the regulation of cell water: several foliar applications using 2 l BlackHum/ha as of crop meeting across the rows, to be repeated after about 14 days. BlackHum can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 33

34 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -HumusWP BIOSTIMULATOR / SOIL CONDITIONER 100% water soluble, for soil and foliar application Growth stimulant and soil conditioner for all agricultural and horticultural plants. Enhances the performance of fertilizers and reduces input-costs. The active ingredient of the product and its effects: PhytoGreen -HumusWP is gained through alkaline extraction from German highly oxidized lignites (known as Leonardite). It arises at the chemical and biological humification of plant and organic matter and by the biological activity of micro-organisms. They provide a very high content of humic acids and natural biologically active trace elements. Benefits of the product: Stimulates plant growth Increases yield and improves quality of plants Improves the soil structure and the water holding capacity Increases and stimulates beneficial microorganisms Enhances the cation exchange capacity (CEC) Promotes root development Acts as a natural chelator for microelements in alkaline soils and increases their availibility for plants Decreases stress by drought and stress by the application of plant treatments Increases the germination of seeds and enhances development of radicles Delays the decomposition of ultraviolet unstable agents PhytoGreen -HumusWP is 100% water soluble. It is suitable for direct application or you also can mix it with soluble fertilizer formulations like soluble NPK, DAP or urea and also with herbicides. It can be applied by sprinkler, drip or surface irrigation systems. First mix the recommended amount with pure water and fill it in the mixing tank. We recommend a miscibility test before the first application of a mixture. 1 kg 25 kg PhytoGreen -HumusWP is a permanent humic substance and can not be degraded that fast by the microorganisms of the soil. It can be used together with or without most fertilizers and micronutrients. Soil Application: Apply 6-10 kg/ha and year and mix in a depth of up to 10 cm. It is recommended to use it more frequently but in rather small application rates (5 x 2 kg). It can be mixed with other soil amendments like peat, sand or compost to enhance the biological activity with 0,5-1 kg/m 3. Foliar application: g/1000 l water every 14 days during vegetation period. Seed treatment: To enhace germination and root development: 1 kg PhytoGreen -HumusWP/100 kg seeds. Seedlings: To enhace root development, dip the root into a 0,05% solution (5 g PhytoGreen -HumusWP/10 l water). UV protection: 0.1% with plant protection products (400g in 400l water/ha and 1m crown height). In a closed container, protected from sun light. Temperatures between 0 C and +20 C allow storage for several years. 34

35 PhytoGreen -CalPhos EC FERTILIZER NP FERTILIZER SOLUTION WITH CALCIUM 3-23 (4) Provides nutrients to the plant immediately. The ultimate supplement to soil fertilisation! 3,0 % N (40 g N/l as carbamide) 23,3% P 2 O 5 (310 g/l water soluble phosphate) 4,2% CaO (56 g/l water soluble calcium oxide) Density: 1,33 kg/l, ph < 1 General: 5-10 l/ha as foliar application from beginning of vegetation in at least 500 l water. Repeat treatment if necessary. Pomaceous and stone fruit: For fruit colouring and firmness: two foliar applications with 10 l/ha four and two weeks before harvest. Berries: For fruit firmness and size, to increase durability: three foliar applications with 5 l/ha from fruit setting until harvest. Strawberries: For fruit firmness and size, to increase durability: three foliar applications with 5 l/ha between blossom and harvest. Fruit vegetable: For fruit firmness and size, to increase durability, to improve red colour of tomatoes: 3-5 foliar applications with 5 l/ha from fruit setting up. PhytoGreen -CalPhos can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Always consider nutient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 35

36 PhytoGreen -MagS MAGNESIUM FERTILIZER SUSPENSION 30 WITH SULPHUR Provides magnesium and sulphur to the plant immediately. The ultimate supplement to soil fertilisation! 29,8 % magnesium oxide (480 g MgO/l) 22,3 % sulphur (360 g S/l) Density: 1,6 kg/l, ph = Berries: From beginning of vegetation 1-5 l/ha as foliar application. Repeat treatment if necessary. Pip fruit: For fruit setting: several foliar applications with 1-4 l/ha from beginning of vegetation (apply together with plant protection against scab). Stone fruit: 1-4 l/ha as foliar application from beginning of vegetation. Repeat treatment if necessary. Vine: Several foliar applications with 2-4 l/ha from preblossom until closing of grapes. Cereals: Several foliar applications with 2-4 l/ha from EC (in autumn from EC 15 upwards). Hop: Several foliar applications with 1-3 l/ha. Potatoes: Several foliar applications with 2-4 l/ha from meeting across the rows until blooming period. Oil seed rape: Several foliar applications with 2-4 l/ha before blooming period. Sugar beet: Several foliar applications with 2-4 l/ha from meeting across the rows with fungicide treatments. PhytoGreen -MagS can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Always consider nutient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 36

37 PhytoGreen -ManganeseNitrate EC-FERTILIZER MANGANESE FERTILIZER LIQUID WITH NITROGEN Provides manganese and nitrate to the plant immediately. The ultimate supplement to soil fertilisation! 15,0 % Mn (235 g/l water soluble manganese) 7,7 % N (119 g/l as nitrate-n) Density: 1,55 kg/l ph < 2 Manganese deficiency is shown by yellowing of leaves, black spots on the leaf, light green mottling between main veins, loss to quality, eg. poor skin finish in potatoes. Manganese availability is low on humic, sandy, friable soils, on soils with a high ph-value and during cold and wet conditions. General: To provide manganese: 1-2 l/ha as foliar application in at least 200 l water. Several applications with small application rates increase the efficiency. Berries, strawberries: To provide manganese, for leaf quality: 2 l/ha from beginning of flowering until harvest. Stone fruit: 2 l/ha as foliar application from beginning of fruit setting until harvest. Pomaceous fruit: To provide manganese, for leaf quality: several foliar applications with 1 l/ha from end of flowering (in rusting sensitive varieties only from walnut size up). For green back-ground colour: 3 foliar applications with 1 l/ha after fall of fruits in June. Vegetables: To provide manganese: 1-2 foliar applications with 2 l/ha. Potatoes: To reduce susceptibility to scab: 1 l/ha with dressing. To provide manganese and improve skin quality: 1-2 foliar applications with 2 l/ha from beginning of meeting across the rows. Cereals: To improve winter hardyness: 1-2 l/ha as foliar application in fall from 3-leaf-stage up. To provide manganese, to stabilise output: 1-2 l/ha as foliar application in spring from beginning of vegetation until 1-node-stage. Oil seed rape: To improve winter hardyness, to provide manganese: 1-2 foliar applications with 2 l/ha in fall from 3- to 6-leaf-stage. Sugar beet: To provide manganese: 1-2 foliar applications with 2 l/ha between 6-leaf-stage and meeting across the rows. PhytoGreen -ManganeseNitrate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Always consider nutient demands of the culture as well as soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 0 C. 37

38 PhytoGreen -Silicon EG-fertilizer PK-fertilizer liquid 5-13 with silicon To strenghten the plant against fungi and insect pests. Silicon hardens the plant tissues and enhances tolerance against heat and drought stress. Suitable for all cultures. The active ingredient of the product and its effects: 7 % SiO 2 (94 g/l water soluble silicon dioxide) 5 % P 2 O 5 (67 g/l water soluble phosphate) 13 % K 2 O (174g/l water soluble potassium oxide) formulated with carboxylic acids Silicon is the second most abundant element in soils and generally present in plant tissue. Even though Silicon is not regarded as essential nutient, scientific trials show that Si has many positive effects on plant growth and health. Cultures become less susceptible to diseases and insect pests. Plants with good Si-supply endure periods with high temperatures or drought stress more easily. PhytoGreen -Silicon additionally contains phosphorous and potassium to guarantee a well balanced plant nutrition. Silicon applied via the roots is consistently more effective than foliarly-applied silicon. A list of some plant diseases that have had their intensities reduced by silicon application is summarized in the following table (according to Rodrigues, F. A. & Datnoff, L.D. (2015): Silicon and Plant deseases. Springer-Verlag): Crop Barley Bean Corn Diseases Black point, Powdery mildew Anthracnose, Angular leaf spot Pythium root and Stalk rot, Corn smut Soil application (with irrigation systems): PhytoGreen -Silicon can be used for all cultures and should preferably be applied by root: several treatments with 5-10 l/ha from beginning of vegetation. Leaf application: Several treatments with 1-3 l/ha from beginning of vegetation every 8-10 days. Do not apply during blooming period. Cucumber Powdery mildew, Anthracnose, Leaf spot, Crown and Root rot, Grey mold rot, Black rot, Fusarium wilt Lettuce Downy Mildew, Fusarium wilt Melon Powdery mildew, Fusarium root rot, Alternaria Rice Rye Blast, Brown spot, Sheat blight, Leaf scald, Stem rot, Root knod nematodes, Grain discoloration Powdery mildew Technical details: Strawberries Soybean Powdery mildew, Anthracnose Rust, Phytophtora root rot, Stem cancer Density: 1,34 kg/l, ph = 12 Tomato Wheat Fusarium crown and root rot, Pythium root rot, Bacterial wilt Powdery mildew; Septoria leaf and Spot blotch, Leaf blast, Eyespot, Bacterial leaf streak, Foot rot 1 l 10 l 200 l 1000 l 38

39 PhytoGreen -MultimicroMix Carbo EC-fertilizer Fluid micro-nutrient mixture with sulphur and magnesium Directly plant available micro-nutrients, sulphur and magnesium formulated with carboxylic acids to prevent any lack situations. The active ingredient of the product: 0,3 % B (Boron) 0,5 % Cu (Copper) 1,5 % Fe (Iron) 1,5 % Mn (Manganese) 0,1 % Mo (Molybdenum) 2,0 % Zn (Zinc) 4,0 % MgO (Magnesium oxide) and 6,4 % S (Sulphur) PhytoGreen -MultimicroMix Carbo prevents micronutrient lacks because it transfers them into plants in an easily assimilable way. It prevents iron and magnesium chlorosis (yellowing of leaves), increasing photosynthesis rate and thus resulting in higher crop yields. By providing Mn and Zn, the whole development of plant is improved, as both are involved in numerous vital reactions of plants. B, Cu and Mo complete the mixture formulated with carboxylic acids of low molecular weight. Carboxylic acids appear in plants in a natural way and improve growth and vitality of the culture as well as yield quality. All cultures: PhytoGreen -MultimicroMix Carbo should be applied preventively against nutrients lack, or when early symptoms of them are observed. The treatment migth be repeated after days if necessary. Application rates: Foliar application: 5 l/ha. Soil/ Root application: 4-8 l/ha PhytoGreen -MultimicroMix Carbo must be applied with enough water to reach a throughout coverage of the full leave area. It is recommended to apply this product at the beginning of the day or during night. Moreover, it can also be used via soil in fertigation, spraying, dripping, etc.. PhytoGreen -MultimicroMix Carbo can be applied together with other products, although it is recommended to perform a miscibility test previously. Technical details: Density: 1,34 kg/l; ph = 2 1 l 10 l 200 l 1000 l To be used only where there is a recognized need. Do not exceed the appropriate dose rates. Store protected against sunlight and frost between 5-40 C. 39

40 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Boron EC FERTILIZER BORETHANOLAMINE FERTILIZER LIQUID Provides boron. Enhances growth of meristem, provides regular blossom-time and fruit setting. Enhances maturity. Ensures the output. The active ingredient of the product: 11% B (150 g/l water soluble boron as Borethanolamine) Density: 1,36 kg/l, ph = 7,9 General: To provide boron: 1-3 l/ha applied as a foliar application with l water/ha or 4-8 l/ha as a soil application. Strawberries: For flower quality, fruit setting and against deformed berries: one foliar application with 1 l/ha at green bud, 2 l/ha in autumn. Pip fruit: For flower quality, fruit setting and skin quality: three foliar applications with 1 l/ha from red bud until petal fall, one application with 2 l/ha after harvest. Stone fruit: For flower quality and fruit setting: 2 l/ha after harvest as foliar applications. Vine: For flower quality, fruit setting, regular maturity and vine quality: two foliar applications with 1 l/ha from increasing of flower cluster until beginning of blossom. PhytoGreen -Bor can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. In a closed container, protected from sun light, not below 4 C. 1 l 10 l 200 l 1000 l Fruiting vegetable, root crops: For fruit setting and fruit quality: 2-3 l/ha as soon as enough leaves are developped as foliar application. Green vegetables, brassica: For inner quality, against heart necrosis: 2-3 l/ha as soon as enough leaves are developped as foliar application. Maize: For pollen quality and graining: 3 l/ha from 4- to 10-leaf-stage as foliar application. Oil seed rape: For regular blossom-time and maturity, output: 3 l/ha in autumn from 4- to 6-leaf stage as foliar application. At high boron deficiency repeat treatment in spring. Sugar beet: Against heart and dry rot: one or two foliar applications with 3 l/ha from 4- to 6-leaf-stage. Potatoes: For inner quality: one or two foliar applications with 1 l/ha from meeting across the rows. Apply only if cultures require additional boron (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. 40

41 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO Ca (Agricalcio) EC FERTILIZER CALCIUM FERTILIZER SOLUTION Provides calcium for organic growers. Enhances fruit quality. Helps to prevent bitter pit and pysiological storage diseases. 10 % CaO (112 g/l water soluble calcium oxide corresponding 80 g/l Ca) formulated with carboxylic acids Density 1,12 kg/l, ph= 12 CARBO-ECO Ca contains water soluble plant nutrients. The main basis of the product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as calcium. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide calcium: 2-4 l/ha applied on the leaves with a minimum of 500 l water/ha. Vine: Several foliar applications with 4 l/ha as soon as flower cluster are visible until four weeks before harvest. Pip fruit: For fruit firmness and colouring, to prevent bitter pit and physiological storage diseases: several foliar applications with 4 l/ha from walnut size up every eight days. Stone fruit: 2-3 foliar applications with 4 l/ha from beginning of blooming until harvest. Green vegetables, brassica: To prevent inner necrosis and leaf-edge necrosis: 3 applications with 2-4 l/ha after begin of fruit set. Potatoes: 1-2 foliar applications with 4 l/ha from meeting across the rows. Ornamentals: 1-2 foliar applications with 2-4 l/ha. Listed as input in organic agriculture (BCS). CARBO-ECO Ca can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 41

42 PhytoGreen -CalciumCarboxylate EC FERTILIZER CALCIUM NITRATE SOLUTION Provides calcium. Enhances fruit quality. Helps to prevent bitter pit and pysiological storage diseases. 13,5 % CaO (182 g/l water soluble calcium oxide) 8 % N (108 g/l water soluble nitrogen) formulated with carboxylic acids Density 1,35 kg/l, ph = 6,1 PhytoGreen -CalciumCarboxylate contains water soluble plant nutrients. The main basis of the product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as calcium. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide calcium: 3-4 l/ha applied on the leaves with a minimum of 500 l water/ha. Vine: Several foliar applications with 3-4 l/ha as soon as flower cluster are visible until four weeks before harvest. Pip fruit: For fruit firmness and colouring, to prevent bitter pit and physiological storage diseases: several foliar applications with 2-4 l/ha from walnut size up every eight days. PhytoGreen-CalciumCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Stone fruit: 2-3 foliar applications with 4 l/ha from beginning of blooming until harvest. Green vegetables, brassica: To prevent inner necrosis and leaf-edge necrosis: 3 applications with 4 l/ha after begin of fruit set. Potatoes: 1-2 foliar applications with 4 l/ha from meeting across the rows. Ornamentals: 1-2 foliar applications with 4 l/ha. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 42

43 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Cu256 EC-FERTILIZER COPPER OXYCHLORIDE SUSPENSION Provides copper. Supports nutrition and strengthening of all cultivated plants! Improves quality, vitality and output. The active ingredient of the product: 19,25 % Cu (256 g copper/l) formulated with carboxylic acids Density: 1,33 kg/l, ph = 7-9 Copper availability is low on humic, sandy, friable soil, on soil with a high ph-value, during cold or in waterlogged or very dry soils. Copper deficieny is shown by twisted flag leaf and twisted younger leaves, shrivelling leaf tips, blind grain sites on ears, poor grain formation, stunted plants. Copper deficieny is shown especially in oats, wheat and barley; rye and triticale are less sensitive. General: To provide copper: 0,25-0,75 l/ha as a foliar application in l water/ha. Vine: To prevent and repair copper deficiency: several foliar applications with 0,25-0,75 l/ha from green sprout tops until closing of grapes. Cereals: To provide copper, for resistence against cold, resistance to lodging, output, corn quality: 1 foliar application with 0,25-0,75 l/ha from 3-leaf-stage until end of tillering, repeat treatment if necessary. Corn: To provide copper: 0,25 l/ha from 6-leaf stage. Fruits: To prevent and repair copper deficiency: several foliar applications with 0,25-0,75 l/ha from green sprout tops. PhytoGreen -Cu256 can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l Apply only if cultures require additional nutrients (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 43

44 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO Cu EC-FERTILIZER COPPER FERTILIZER SOLUTION Prevents and corrects copper deficiencies. Provides copper to the plant immediately. The active ingredient of the product: 5 % water soluble copper (58 g/l Cu) formulated with carboxylic acids Density: 1,16 kg/l, ph = 1,3 CARBO-ECO products contain water soluble plant nutrients. The main basis of the products is the use of lowmolecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as copper. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide copper: 2-4 l/ha as a foliar application in l water/ha. Vine: To prevent and repair copper deficiency: several foliar applications with 2-3 l/ha from green sprout tops until closing of grapes. Corn: To provide copper: 2 l/ha from 6-leaf stage as foliar application. Cereals: To provide copper, for resistence against cold, resistance to lodging, output, corn quality: 1 foliar application with 2-3 l/ha from 3-leaf-stage until end of tillering, repeat treatment if necessary. Cucumber: To provide copper: 2 l/ha as foliar application from 4-leaf-stage, repeat treatment if necessary. Certified as input in organic agriculture (BCS) and listed (FiBL, InfoXGen). CARBO-ECO Cu can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l Apply only if cultures require additional nutrients (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 44

45 PhytoGreen -CopperCarboxylate EC-FERTILIZER COPPER FERTILIZER SOLUTION Prevents and corrects copper deficiencies. Provides copper to the plant immediately. The active ingredient of the product: 5 % water soluble copper (57 g/l Cu) formulated with carboxylic acids Density: 1,14 kg/l, ph = 2,45 The main basis of this product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as copper. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide copper: 2-4 l/ha as a foliar application in l water/ha. Vine: To prevent and repair copper deficiency: several foliar applications with 2-3 l/ha from green sprout tops until closing of grapes. Corn: To provide copper: 2 l/ha from 6-leaf stage as foliar application. Cereals: To provide copper, for resistence against cold, resistance to lodging, output, corn quality: 1 foliar application with 2-3 l/ha from 3-leaf-stage until end of tillering, repeat treatment if necessary. Cucumber: To provide copper: 2 l/ha as foliar application from 4-leaf-stage, repeat treatment if necessary. PhytoGreen -CopperCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l Apply only if cultures require additional nutrients (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 45

46 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO Fe EC-FERTILIZER IRON FERTILIZER LIQUID Corrects and prevents the lack of iron of any culture. Quick absorption and action in the plant. Stable product in the whole ph`s range. The active ingredient of the product: 5 % water soluble iron (58,5 g/l Fe) formulated with carboxylic acids Density: 1,17 kg/l, ph = 1,2 CARBO-ECO products contain water soluble plant nutrients. The main basis of the products is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as iron. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To prevent and remedy iron-induced chlorosis: 2-5 l/ha as foliar application or 5-8 l/ha as soil application. Berry fruits: 1-2 foliar applications with 3-5 l/ha from beginning of vegetation until harvest. Stonefruit: 1-2 foliar applications with 3-5 l/ha from fruit setting until harvest. Pip fruit: Leaf development, fruit setting, yield: 3-5 l/ha as foliar application during full flowering, finish flowering, post flowering and at hazelnut size. To achieve a plain shell, against greasiness, to prevent and remedy iron-induced chlorosis: 1-2 times with 5 l/ha as of walnut size. Vine: 4 foliar applications with 3-5 l/ha after sprouting until the grapes have reached their full size. Arable farming: Several foliar applications with 3-5 l/ ha. Ornamental plants: 4 foliar applications with ml/100 m 2 (3-5 l/ha). Mediterranean plants and citrus: % as foliar application. Certified as input in organic agriculture (BCS) and listed (FiBL, InfoXGen). CARBO-ECO Fe can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l Apply only if cultures require additional nutrients (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 46

47 PhytoGreen -IronCarboxylate EC-FERTILIZER IRON FERTILIZER LIQUID Corrects and prevents the lack of iron of any culture. Quick absorption and action in the plant. Stable product in the whole ph`s range. The active ingredient of the product: 5 % water soluble iron (58,5 g/l Fe) formulated with carboxylic acids Density 1,17 kg/l, ph = 2,4 The main basis of this product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as iron. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To prevent and remedy iron-induced chlorosis: 2-5 l/ha as foliar application or 5-8 l/ha as soil application. Berry fruits: 1-2 foliar applications with 3-5 l/ha from beginning of vegetation until harvest. Stonefruit: 1-2 foliar applications with 3-5 l/ha from fruit setting until harvest. Pip fruit: Leaf development, fruit setting, yield: 3-5 l/ha as foliar application during full flowering, finish flowering, post flowering and at hazelnut size. To achieve a plain shell, against greasiness, to prevent and remedy iron-induced chlorosis: 1-2 times with 5 l/ha as of walnut size. Vine: 4 foliar applications with 3-5 l/ha after sprouting until the grapes have reached their full size. Arable farming: Several foliar applications with 3-5 l/ ha. Ornamental plants: 4 foliar applications with ml/100 m 2 (3-5 l/ha). Mediterranean plants and citrus: % as foliar application. PhytoGreen -IronCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l Apply only if cultures require additional nutrients (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 47

48 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO K POTASSIUM-FERTILIZER LIQUID Provides potassium for all cultures, especially in organic growing. 20 % K 2 O (264 g/l water soluble potassium oxide) formulated with carboxylic acids Density: 1,32 kg/l, ph = 7 Carbo-Eco K contains water soluble plant nutrients. The main basis of the product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as potassium. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide potassium: ml/100 l water as foliar application. Vine: One foliar application with 4 l/ha as soon as enough leaves are developed. Pip fruit: For fruit colouring, to provide potassium: 2-4 foliar applications with 4 l/ha from June. Vegetables: To provide potassium: several foliar applications with 3-4 l/ha as soon as enough leaves are developed. Potatoes: Two foliar applications with 4 l/ha. Cereals: Two foliar applications with 3-4 l/ha. Certified as input in organic agriculture (BCS) and listed (FiBL). PhytoGreen-PotassiumCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 48

49 PhytoGreen -PotassiumCarboxylate EC FERTILIZER NK-FERTILIZER LIQUID Provides potassium for all cultures. 33 % K 2 O (502 g/l water soluble potassium oxide) 8 % N (45 g/l water soluble nitrogen) formulated with carboxylic acids Density: 1,52 kg/l, ph = 12,9 PhytoGreen -PotassiumCarboxylate contains water soluble plant nutrients. The main basis of the product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as potassium. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide potassium: ml/100 l water as foliar application or l/ha via the soil. Vine: One foliar application with 4-5 l/ha as soon as enough leaves are developed. Pip fruit: For fruit colouring, to provide potassium: 2-4 foliar applications with 4-5 l/ha from June. Vegetables: To provide potassium: several foliar applications with 3-5 l/ha as soon as enough leaves are developed. Potatoes: Two foliar applications with 4-5 l/ha. Cereals: Two foliar applications with 3-5 l/ha. PhytoGreen -PotassiumCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light, not below 4 C. 49

50 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Mn27 EC- FERTILIZER MANGANESE CARBONATE SUSPENSION micronized Provides manganese. Supports nutrition of all cultivated plants! Improves quality, vitality and output. 27 % Mn (500 g Manganese/l) out of micronized manganese carbonate Density: 1,83 kg/l, ph = 6 Manganese availability is low on humic, sandy, friable soils, on soils with a high ph-value and during cold and wet conditions. Manganese deficiency is shown by yellowing of leaves, black spots on the leaf, light green mottling between main veins, loss to quality, e.g. poor skin finish in potatoes. General: To provide manganese: 1-2 l/ha or 0,2-1%. Strawberries: To provide manganese, for vitality and output: 1-2 applications with 4 l/ha from beginning of flowering until harvest. Pip fruit: For leaf quality, to provide manganese: several applications with 1 l/ha from hazelnut size up. To achieve a green back-ground colour: 3 applications with 0,5 l/ha from walnut size up. Stonefruit: For leaf quality: 1 l/ha from fruit setting up. Vine: To optimize photosynthesis: 2-3 applications with 1 l/ha as soon as flower clusters are visible. Mediterranean plants and citrus: %. Vegetables: For leaf quality and resistance: 1-2 applications with 1 l/ha as soon as enough leaves are developed. Potatoes: To reduce the susceptibility to scab: 0,5 l/ha with dressing. For skin quality and output: 1-2 applications with 1 l/ha from 1 week after beginning of vegetation up. Cereals: For resistance to cold and lodging, for output: 1-2 applications with 0,5-1 l/ha from 2-leaf-stage on. Sugar beet: For resistance and output: 1-2 applications with 1 l/ha from 4-leaf-stage on. Oil seed rape: For resistance and output: 1-2 applications with 1 l/ha from 8-leaf-stage on. PhytoGreen -Mn27 can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 5 l 10 l Listed as input in organic agriculture (FiBL, InfoXGen). In a closed container, protected from sun light, not below 0 C. 50

51 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO Mn EC-FERTILIZER MANGANESE FERTILIZER LIQUID Provides manganese. Quick absorption and direct availability. 5 % water soluble manganese (Mn) formulated with carboxylic acids Density: 1,16 kg/l, ph = 1,8 CARBO-ECO products contain water soluble plant nutrients. The main basis of the products is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as manganese. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide manganese: 2-5 l/ha as foliar application or 5-8 l/ha via the soil. Strawberries: 1-2 foliar applications with 2 l/ha from beginning of flowering until harvest. Pip fruit: To provide manganese: several foliar applications with 2-3 l/ha from hazelnut size up. To achieve a green back-ground colour: 3 foliar applications with 2 l/ ha from walnut size up. Stonefruit: 2-3 l/ha as foliar application from fruit setting. Vine: 2-3 foliar applications with 2-3 l/ha as soon as flower clusters are visible. Vegetables: 1-2 foliar applications with 2-3 l/ha as soon as enough leaves are developed. Potatoes: 1-2 foliar applications with 2-3 l/ha from 1 week after beginning of vegetation. Cereals: For resistance to cold and lodging, for output: 1 foliar applications in autumn with 2-3 l/ha from 2-leafstage. Sugar beet: 2-3 foliar applications with 2 l/ha from 4-leaf-stage. Oil seed rape: For resistance and output: 1-2 foliar applications with 2-3 l/ha from 8-leaf-stage. Mediterranean plants and citrus: %. CARBO-ECO Mn can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. Certified as input in organic agriculture (BCS) and listed (FiBL, InfoXGen). In a closed container, protected from sun light, not below 0 C. 10 l 20 l 200 l 1000 l 51

52 PhytoGreen -ManganeseCarboxylate EC-FERTILIZER MANGANESE FERTILIZER LIQUID Provides manganese. Quick absorption and direct availability. 5 % water soluble manganese (59 g/l Mn) formulated with carboxylic acids Density: 1,18 kg/l, ph = 6,6 The main basis of this product is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as manganese. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: To provide manganese: 2-5 l/ha as foliar application or 5-8 l/ha via the soil. Strawberries: 1-2 foliar applications with 2 l/ha from beginning of flowering until harvest. Pip fruit: To provide manganese: several foliar applications with 2-3 l/ha from hazelnut size up. To achieve a green back-ground colour: 3 foliar applications with 2 l/ ha from walnut size up. Stonefruit: 2-3 l/ha as foliar application from fruit setting. Vine: 2-3 foliar applications with 2-3 l/ha as soon as flower clusters are visible. Vegetables: 1-2 foliar applications with 2-3 l/ha as soon as enough leaves are developed. Potatoes: 1-2 foliar applications with 2-3 l/ha from 1 week after beginning of vegetation. Cereals: For resistance to cold and lodging, for output: 1 foliar applications in autumn with 2-3 l/ha from 2-leafstage. Sugar beet: 2-3 foliar applications with 2 l/ha from 4-leaf-stage. Oil seed rape: For resistance and output: 1-2 foliar applications with 2-3 l/ha from 8-leaf-stage. Mediterranean plants and citrus: %. PhytoGreen -ManganeseCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l In a closed container, protected from sun light, not below 0 C. 52

53 PhytoGreen -Manganese150 EC-FERTILIZER MANGANESE FERTILIZER LIQUID Formulated with buffering agents and a modern surfactant system to ensure stability and effective cover and adhesion to foliage. The active ingredient of the product: 10,9 % water soluble manganese (150 g/l Mn) Density: 1,37 kg/l, ph = 4-7 PhytoGreen -Manganese150 is a buffered liquid formulation of manganese sulphate designed for cost-effective correction of manganese deficiency in crops. Manganese is used in the plant in conjunction with other essential nutrients for stimulation of various enzyme systems. Its major role is in the synthesis of chlorophyll and metabolism of nitrogen. Most crops are sensitive to manganese levels, particularly cereals, vegetables, brassicas, root crops and fruit. Rates of Use: Marginal Deficiency: 2.0 l/ha in at least 200 litres of water. Moderate deficiency: 4.0 l/ha in at least 200 litres of water. Severe deficiency: 4.0 l/ha in at least 200 litres of water and repeat as necessary during the growing season. Timing: Apply whenever a manganese deficiency is observed or expected, or as a routine maintenance treatment. Applications may commence after the three-leaf stage or as soon as there is sufficient foliage present to absorb the spray. Best results will be obtained from applications made during the early morning or evening when moisture is present in the plant Do not apply in extremes of temperature, very bright sunlight or when crops are, or are likely to be under drought or other stress. PhytoGreen -Manganese150 can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l In a closed container, protected from sun light, not below 5 C. 53

54 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO Mg EC-FERTILIZER MAGNESIUM FERTILIZER LIQUID Provides magnesium for all cultivated plants. Quick absorption and direct availability. The active ingredient of the product: 5 % water soluble magnesium oxide (59 g/l MgO) 10 % water soluble sulphur trioxide (119 g/l SO3) Density: 1,19 kg/l, ph = 1,5 CARBO-ECO products contain water soluble plant nutrients. The main basis of the products is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as magnesium. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: Leaf fertilizer to provide magnesium: 2-5 l/ha, concentration: %. Pip fruit: Several foliar applications with 5 l/ha from finish flowering (in case of varieties susceptible to russeting apply only when the plant has grown to the size of a walnut). Stonefruit: To avoid early falling of leaves, to supply with magnesium: 2-3 foliar applications with 5 l/ha from start of blooming period until harvest. Vine: To prevent lack of magnesium and stem necrosis, leaf quality: several foliar applications with 5 l/ha when inflorescences are visible until one month before vintage. CARBO-ECO Mg can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Strawberries: Yield, vitality, magnesium supply: 2-3 foliar applications with 5 l/ha from start of blooming period until harvest. Fruiting vegetable, root and tuber crops, brassica, green and bulb vegetables: To support leaf quality, leaf colour, photosynthesis, to supply with magnesium: 1-2 foliar applications with 5 l/ha as soon as leaves have grown sufficiently. Potatoes: To prevent early leaf dying, to gain a better yield, to supply with magnesium: 1-2 foliar applications with 5 I/ha from closing of rows on. Ornamental plants: To support leaf quality, leaf colour, photosynthesis, to supply with magnesium: 1-2 foliar applications with 5 l/ha as soon as leaves have developed sufficiently. Certified as input in organic agriculture (BCS) and listed (FiBL). In a closed container, protected from sun light, not below 0 C. 54

55 PhytoGreen -MagnesiumCarboxylate EC-FERTILIZER MAGNESIUMNITRATE SOLUTION Provides magnesium for all cultivated plants. Quick absorption and direct availability. The active ingredient of the product: 9 % water soluble magnesium oxide (119 g/l MgO) 6 % water soluble nitogen (80 g/l N) Density: 1,3 kg/l, ph = 6,4 PhytoGreen -MagnesiumCarboxylate contains water soluble magnesium. The main basis of the products is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as magnesium. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: Leaf fertilizer to provide magnesium: 2-4 l/ha, concentration: %. Pip fruit: Several foliar applications with 4 l/ha from finish flowering (in case of varieties susceptible to russeting apply only when the plant has grown to the size of a walnut). Stonefruit: To avoid early falling of leaves, to supply with magnesium: 2-3 foliar applications with 4 l/ha from start of blooming period until harvest. Vine: To prevent lack of magnesium and stem necrosis, leaf quality: several foliar applications with 4 l/ha when inflorescences are visible until one month before vintage. Strawberries: Yield, vitality, magnesium supply: 2-3 foliar applications with 4 l/ha from start of blooming period until harvest. Fruiting vegetable, root and tuber crops, brassica, green and bulb vegetables: To support leaf quality, leaf colour, photosynthesis, to supply with magnesium: 1-2 foliar applications with 4 l/ha as soon as leaves have grown sufficiently. Potatoes: To prevent early leaf dying, to gain a better yield, to supply with magnesium: 1-2 foliar applications with 4 I/ha from closing of rows on. Ornamental plants: To support leaf quality, leaf colour, photosynthesis, to supply with magnesium: 1-2 foliar applications with 5 l/ha as soon as leaves have developed sufficiently. PhytoGreen -MagnesiumCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l In a closed container, protected from sun light, not below 0 C. 55

56 PhytoGreen -Mg500 EC-FERTILIZER MAGNESIUM HYDROXIDE SUSPENSION 34 Provides magnesium for all cultivated plants. Improves quality, vitality and yield. Supports control of botrytis and stem necrosis in viticulture. The active ingredient of the product: 34% magnesium oxide (500 g/l MgO equivalent to 300 g/l Mg) Density: 1,44 kg/l, ph = 10 General: Leaf fertilizer to provide magnesium: 3-4 l/ha, concentration: 0.5-1%. Pip fruit: To avoid early falling of leaves, to supply with magnesium apply several times 4 l/ha from finish flowering (in case of varieties susceptible to russeting apply only when the plant has grown to the size of a walnut). Stonefruit: To avoid early falling of leaves, to supply with magnesium: 2-3 times 4 l/ha from start of blooming period until harvest. Vine: To prevent lack of magnesium and stem necrosis, leaf quality: several applications with 3-4 l/ha when inflorescences are visible until one month before vintage. Strawberries: Yield, vitality, magnesium supply: 2-3 times 4 l/ha from start of blooming period until harvest. Fruiting vegetable, root and tuber crops, brassica, green and bulb vegetables: To support leaf quality, leaf colour, photosynthesis, to supply with magnesium: 1-2 times 4 l/ha as soon as leaves have grown sufficiently. Potatoes: To prevent early leaf dying, to gain a better yield, to supply with magnesium: 1-2 times 4 I/ha from closing of rows on. Ornamental plants: To support leaf quality, leaf colour, photosynthesis, to supply with magnesium: 1-2 times 4 l/ha as soon as leaves have developed sufficiently. PhytoGreen -Mg500 can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l In a closed container, protected from sun light, not below 0 C. 56

57 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Molybdenum EC-FERTILIZER Molybdenum fertilizer liquid Quick absorption and direct availability. The ultimate supplement to soil fertilisation! The active ingredient of the product: 15,6 % Mo (215 g/l water soluble Molybdenum) Density: 1,37 kg/l Molybdenum availability is low on light and acidic soils (sandy half-bog soils, highmoor soils, garden mould and nutrient substratums) as well as during dryness. Molybdenum deficiency is shown mainly on younger leaves, but also by chlorosis in older leaves. The leafedges get necrosis fast and curl, the leaf laminas are reduced, partially only with growing leaf veins ( whiptail symptoms). In general you can notice a reduced growth with lightened leaves and a tendency to wither. In cauliflower you can observe the formation of deformed leaves (shape of hook). General: To prevent molybdenum: 0,25 l/ha as foliar application with at least 200 l water/ha. Oil seed rape: To provide molybdenum, against whiptail symptoms: 1-2 foliar applications with 0,25 l/ha from beginning of shooting. Crucifers, leaf vegetables, bulbous vegetables: To provide molybdenum, against whiptail symptoms, against deformed leaves (shape of hook): 1-2 foliar applications with 0,25 l/ha as soon as enough leaves are developed. Sugar beet: To provide molybdenum, against whiptail symptoms: 1-2 foliar applications with 0,25 l/ha between 6-leafstage and meeting across the rows. PhytoGreen -Molybdenum can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 5 l Listed as input in organic agriculture (FiBL, InfoXGen). Apply only if cultures require additional sulphur (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 5 C. 57

58 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Sulphur800 sulphur fertilizer-suspension micronized On acid soils, on poorly aerated soils, on soils with low humus content the availability of sulphur is low. For yield and quality. The active ingredient of the product: 56 % sulphur (800 g S/l) based on micronized elemental sulphur Density: 1,42 kg/l, ph = 8 Sulphur deficiency is shown by light-green to brigth-yellow, with rape, beet and potatoes being partly reddish, mottled. Sulphur is used to build amino acids, proteins, enzymes and vitamins. When sulfur is lacking the protein metabolism in the plant is disturbed. General: To prevent and repair sulphur deficiency: several applications with 2-10 l/ha as a foliar application with at least 300 l water/ha. Oil seed rape: To provide sulphur; for oil content, flower quality and output: 1-2 applications with 5-10 l/ha from 6-leaf stage until beginning of blossom. Hop: To prevent and repair sulphur deficiency: several applications with 0,2-0,4% as needed. Vine: Maximum 8 applications: 3-4 l/ha from green sprout tops, 4 l/ha after blossom until one month before vintage with l water/ha. Cereals: To provide sulphur, to reduce susceptibility to mildew: 1-2 applications with 3-5 l/ha from beginning of tillering. Listed as input in organic agriculture (FiBL). Back carrier spray nozzle % PhytoGreen -Sulphur can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 10 l 200 l 1000 l Apply only if cultures require additional sulphur (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. Not below 5 C. 58

59 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -Zinc40 EC-FERTILIZER Zinc oxide fertilizer suspension Supplies zinc. At high phosphor level, in cold and wet, humus-rich soils and in soils with high ph value zinc bioavailability is low. The active ingredient of the product: 40 % zinc (700 g/l Zn) Density: 1,74 kg/l, ph = 9 General: For zinc supply: 0,5-2 l/ha as a foliar application in at least 200 litres of water. Strawberries: For flower quality, fruit setting, against deformed berries: 0,5 l/ha from green till white bud. For cold hardiness: 1,0 l/ha in fall. Stone fruit: rosettes leaf quality: 2-3 x 0,25 l/ha after blossom. Storage of reserve substances, regeneration, resistance against cold, flower quality: 2 x 0.5 l/ha after harvest. Pomaceous fruit: For initial development, emergence and leaf quality: 1-2 times 0.5 l/ha from the stadium Red Bud until fruit fall. Storage of reserve substances, regeneration, resistance against cold, flower quality: 2 x 0.5 l/ ha after harvest. Vine: For flowering, fruit set, uniform ripening and wine quality: l/ha as a foliar application when the inflorescences are increasing. PhytoGreen -Zinc can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 1 l 5 l 200 l 1000 l Cereals: For increased yield and grain quality: 1 l/ha as a foliar application from 2-leaf stage. Maize: For corncob filling: 1-2 times 1 l/ha as a foliar application from 4-leaf stage. Vegetable: For leaf quality and initial development: l/ha as a foliar application as soon as enough leaves are developed. Ornamental plants: For leaf quality and growth: in the greenhouse 4 applications with ml/100 m² (1-2 l/ ha). Hops: For bud and sprout growth and quality: 3 foliar applications with % before flowering. Mediterranean and citrus plants: 0.25% as a foliar application. Listed as input in organic agriculture (FiBL, InfoXGen). Apply only if cultures require additional zinc (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves only and at least two hours before irrigation or rain. Not below 0 C. 59

60 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO Zn EC-FERTILIZER Zinc fertilizer liquid Supplies zinc. Quick absorption and direct availability. The active ingredient of the product: 5 % water soluble zinc (58 g/l Zn) ph 1,5, density 1,17 kg/l CARBO-ECO products contain water soluble plant nutrients. The main basis of the products is the use of low-molecular weight carboxylic acids which act as complexing agents. Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as zinc. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. General: For zinc supply: 2-5 l/ha as a foliar application in at least 200 l of water or 5-8 l/ha via the soil. Strawberries: For flower bud growth, for cold hardiness: 3-4 l/ha as foliar application in fall. Stone fruit: For initial development: 3-4 l/ha as a foliar application after harvest. Pomaceous fruit: For initial development, emergence and leaf quality: 1-2 foliar applications with 3-4 l/ha at the stadium Red Bud and/or after havest. Vine: For flowering, fruit set, uniform ripening and wine quality: 3-4 l/ha as foliar application when the inflorescences are increasing. CARBO-ECO Zn can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Cereals: For increased yield and grain quality: 2 l/ha as foliar application from 2-leaf stage. Maize: For corncob filling: 1-2 foliar applications with 2-3 l/ha from 4-leaf stage. Vegetable: For leaf quality and initial development: 2-4 l/ha as foliar application from vegetation height of 15 cm. Ornamental plants: For leaf quality and growth: ,5 % as foliar application. Hops: For bud and sprout growth and quality: 3 foliar applications with 0.05 % at a height of 1 m. Mediterranean and citrus plants: ,5 % as foliar application. Certified as input in organic agriculture (BCS) and listed (FiBL, InfoXGen). Apply only if cultures require additional zinc (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves only and at least two hours before irrigation or rain. Not below 0 C. 60

61 PhytoGreen -ZincCarboxylate EC-FERTILIZER Zinc fertilizer liquid Supplies zinc. Quick absorption and direct availability. The active ingredient of the product: 5 % water soluble zinc (58 g/l Zn) Density 1,16 kg/l, ph = 5,5 The main basis of this product is the use of low-molecular weight carboxylic acids which act as complexing agents. General: For zinc supply: 2-5 l/ha as a foliar application in at least 200 l of water or 5-8 l/ha via the soil. Strawberries: For flower bud growth, for cold hardiness: 3-4 l/ha as foliar application in fall. Stone fruit: For initial development: 3-4 l/ha as a foliar application after harvest. Pomaceous fruit: For initial development, emergence and leaf quality: 1-2 foliar applications with 3-4 l/ha at the stadium Red Bud and/or after havest. Vine: For flowering, fruit set, uniform ripening and wine quality: 3-4 l/ha as foliar application when the inflorescences are increasing. PhytoGreen -ZincCarboxylate can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Carboxylic acids appear in plants in a natural way. Examples are formic acid, malic acid, butyric acid, tartaric acid, citric or acetic acid. Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH). They deprotonate in a basic environment and form water soluble carboxylic salts with nutrient ions such as zinc. Furthermore, carboxylic acids improve growth and vitality of the culture as well as yield quality. Cereals: For increased yield and grain quality: 2 l/ha as foliar application from 2-leaf stage. Maize: For corncob filling: 1-2 foliar applications with 2-3 l/ha from 4-leaf stage. Vegetable: For leaf quality and initial development: 2-4 l/ha as foliar application from vegetation height of 15 cm. Ornamental plants: For leaf quality and growth: ,5 % as foliar application. Hops: For bud and sprout growth and quality: 3 foliar applications with 0.05 % at a height of 1 m. Mediterranean and citrus plants: ,5 % as foliar application. Apply only if cultures require additional zinc (consider plant demand and soil analysis). Do not exceed recommended application rates. Apply on dry leaves only and at least two hours before irrigation or rain. Not below 4 C. 61

62 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -CerealStarter Organic-mineral NK-fertilizer with 4.4% micronized manganese and other trace elements Insufficient supply of nutrients can damage germination and emergence. Crop quality and yield are reduced. PhytoGreen -CerealStarter prevents this. 2,0 % N (27 g/l organic nitrogen) 2,5 % K 2 O (32 g/l potassium oxide) 0,2 % B (2,5 g/l Boron out of boron ethanolamine) 0,6 % Cu (7 g/l Copper out of copper oxychloride) 4,4% Mn (56 g/l Manganese out of Mn-carbonate) 0,1% Mo (1,2 g/l Molybdenum out of molybdate) 1,6 % Zn (20 g/l Zinc out of zinc oxide) Special formulation: PhytoGreen -CerealStarter additionally contains 0,2 % S (sulphur) and 0,1 % P 2 O 5 (phosphate). With seaweed extracts, further natural nutrients in trace amounts, such as Mg, Fe; carbohydrates, fatty acids, vitamins A, B1, B2, B3, B6, B12, C, D3, E and K, and phytohormones. Density: 1,2 kg/l The advantages: S Direct application without the addition of water S Low application rate S For optimal initial supply of seeds with nutrients With seaweed: S For vitalisation and activation of microorganisms S Enhances resistance against pathogens Grain and rape: To supply nutrients, for uniform germination, for healthy seedlings, stable cultures and high yield: Spray 200 ml evenly on 100 kg seeds (2 l/ton seeds). PhytoGreen -CerealStarter can be applied together with chemical seed treatment. With proteins and vitamins: S Excellent adhesive properties S Fast drying S Improves the germination significantly Listed as input in organic agriculture (FiBL, InfoXGen). In a closed container, protected from sun light, between 0 C and 20 C. 5 l 10 l 200 l 62

63 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -CornStarter Organic-mineral NK-fertilizer with trace elements Insufficient supply of nutrients can damage germination and emergence. Crop quality and yield are reduced. PhytoGreen-CornStarter prevents this. 1,0 % N (16 g/l organic nitrogen) 2,0 % K 2 O (32 g/l potassium oxide) 0,2 % B (3 g/l Boron out of boron ethanolamine) 1,2 % Cu (20 g/l Copper out of copper oxychloride) 12,0 % Mn (200 g/l Manganese out of Mn-carbonate) 0,3% Mo (5 g/l Molybdenum out of molybdate) 6,0 % Zn (100 g/l Zinc out of zinc oxide) Special formulation: PhytoGreen -CornStarter additionally contains 2 % S (32 g/l sulphur), 1% Mg (16 g/l magnesium), 1,6% Ca (28 g/l calcium) and 0,1 % P 2 O 5 (1,5 g/l phosphate). With seaweed extracts, further natural nutrients in trace amounts, such as Na, Fe; carbohydrates, fatty acids, vitamins A, B1, B2, B3, B6, B12, C, D3, E and K, and phytohormones. Density: 1,6 kg/l The advantages: S Direct application without the addition of water S Low application rate S For optimal initial supply of seeds with nutrients With seaweed: S For vitalisation and activation of microorganisms S Enhances resistance against pathogens Corn: To supply nutrients, for uniform germination, for healthy seedlings, stable cultures and high yield: Spray 100 ml evenly on 100 kg seeds (1 l/ton seeds). PhytoGreen -CornStarter can be applied together with chemical seed treatment. With proteins and vitamins: S Excellent adhesive properties S Fast drying S Improves the germination significantly Listed as input in organic agriculture (FiBL, InfoXGen). In a closed container, protected from sun light, between 0 C and 20 C. 5 l 10 l 200 l 63

64 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -PotatoStarter Organic-mineral NK-fertilizer with trace elements Insufficient supply of nutrients inhibits growth. Crop quality and yield are reduced. PhytoGreen -PotatoStarter provides an initial nutrient deposit for the young plant. 1,0 % N (15 g/l organic nitrogen) 0,08 % P 2 O 5 (1 g/l phosphate) 1,0 % K 2 O (15 g/l potassium oxide) 1,0 % Mg (13 g/l magnesium) 1,8 % S (23 g/l sulphur) 3,0% Mn (40 g/l Manganese) 3,0 % Zn (40 g/l Zinc) 1,2 % Cu (17 g/l Copper) 0,4 % B (5,5 g/l Boron) 0,3% Mo (4,7 g/l Molybdenum) Special formulation: PhytoGreen -PotatoStarter additionally contains humic and fulvic acids, seaweed extracts, further natural nutrients in trace amounts, such as Na, Fe; carbohydrates, fatty acids, vitamins A, B1, B2, B3, B6, B12, C, D3, E and K, and phytohormones. Density: 1,25 kg/l The advantages: S Direct application without the addition of water S Low application rate S For optimal initial supply of seeds with nutrients With seaweed: S For vitalisation and activation of microorganisms S Enhances resistance against pathogens Potatoes: To supply nutrients, for healthy young plants, stable cultures and high yield: Spray 200 ml evenly on 1 ton seed potatoes. PhytoGreen -PotatoStarter can be applied together with chemical seed treatment. With proteins and vitamins: S Excellent adhesive properties S Fast drying S Improves the germination significantly Listed as input in organic agriculture (FiBL). In a closed container, protected from sun light, between 0 C and 20 C. 5 l 10 l 200 l 64

65 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -LegumeStarter Organic-mineral NK-fertilizer with trace elements Insufficient supply of nutrients can damage germination and emergence. Crop quality and yield are reduced. PhytoGreen -LegumeStarter prevents this. 1,5 % N (20 g/l organic nitrogen) 2,3 % K 2 O (30 g/l potassium oxide) 1,5 % B (Boron out of boron ethanolamine) 0,5 % Cu (7 g/l Copper out of copper oxychloride) 0,01 % Fe (0,15 g/l Iron) 4,0% Mn (52 g/l Manganese out of Mn-carbonate) 0,1% Mo (0,8 g/l Molybdenum out of molybdate) 3,1 % Zn (40 g/l Zinc out of zinc oxide) Special formulation: PhytoGreen -LegumeStarter additionally contains 0,1 % P 2 O 5 (1 g/l phosphate), 0,3% Ca (4 g/l calcium), 0,2% Mg (2 g/l magnesium) and 0,7 % S (9 g/l sulphur). With seaweed extracts, further natural nutrients in trace amounts, such as Mg, Na, Fe; carbohydrates, fatty acids, vitamins A, B1, B2, B3, B6, B12, C, D3, E and K, and phytohormones. Density: 1,3 kg/l The advantages: S Direct application without the addition of water S Low application rate S For optimal initial supply of seeds with nutrients With seaweed: S For vitalisation and activation of microorganisms S Enhances resistance against pathogens Legume seeds: To supply nutrients, for uniform germination, for healthy seedlings, stable cultures and high yield: Spray 200 ml evenly on 100 kg seeds (2 l/ton seeds). PhytoGreen -LegumeStarter can be applied together with chemical seed treatment. With proteins and vitamins: S Excellent adhesive properties S Fast drying S Improves the germination significantly Listed as input in organic agriculture (FiBL). In a closed container, protected from sun light, between 0 C and 20 C. 5 l 10 l 200 l 65

66 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -PumpkinStarter Organic-mineral NK-fertilizer with secondary and trace elements Insufficient supply of nutrients can damage germination and emergence. Crop quality and yield are reduced. PhytoGreen -PumpkinStarter prevents this. 1,3 % N (17 g organic nitrogen/l) 1,4 % K 2 O (19 g potassium oxide/l) 1,8 % Mg (24 g Magnesium/l out of Mg-carbonate) 3,2 % Ca (44 g Calzium/l out of Ca-carbonate) 3,0 % Mn (41 g Manganese/l out of Mn-carbonate) 2,0 % Cu (27 g Copper/l out of copper oxychloride) 0,6 % Zn (8 g Zinc/l out of zinc oxide) 0,4 % Fe (5 g Iron/l out of iron sulfate) 0,4 % B (5 g Boron/l out of boron ethanolamine) 0,1 % Mo (1,6 g Molybdenum/l out of molybdate) Special formulation: PhytoGreen -PumpkinStarter was developed due to the nutrient demand of pumpkins. It additionally contains seaweed extracts to enhance root development. Density: 1,3 kg/l The advantages: S Direct application without the addition of water S Low application rate S For optimal initial supply of seeds with nutrients With seaweed: S For vitalisation and activation of microorganisms S Enhances resistance against pathogens Pumpkin seeds: To supply nutrients, for uniform germination, for healthy seedlings, stable cultures and high yield: Spray 200 ml evenly on 100 kg seeds (2 l/ton seeds). PhytoGreen -PumpkinStarter can be applied together with chemical seed treatment. With proteins and vitamins: S Excellent adhesive properties S Fast drying S Improves the germination significantly In a closed container, protected from sun light, between 0 C and 20 C. 5 l 10 l 200 l 66

67 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -WeedStarter Organic-mineral NK-fertilizer with trace elements Insufficient supply of nutrients can damage germination and emergence. Crop quality and yield are reduced. PhytoGreen-WeedStarter prevents this. 2,0 % N (26 g/l organic nitrogen) 3,1 % K 2 O (44 g/l potassium oxide) 0,2 % B (2,8 g/l Boron) 0,5 % Cu (7 g/l Copper) 3,0 % Fe (42 g/l Iron) 4,1 % Mn (58 g/l Manganese) 0,1% Mo (1,6 g/l Molybdenum) 1,5 % Zn (22 g/l Zinc) Special formulation: With 0,1 % P 2 O 5 (phosphate), 0,6% S (sulphur), seaweed extracts, further natural nutrients in trace amounts, such as Mg, Na, Fe; carbohydrates, fatty acids, vitamins A, B1, B2, B3, B6, B12, C, D3, E and K, and phytohormones. The advantages: S Direct application without the addition of water S Low application rate S For optimal initial supply of seeds with nutrients With seaweed: S For vitalisation and activation of microorganisms S Enhances resistance against pathogens Weed: To supply nutrients, for uniform germination, for healthy seedlings, stable cultures and high yield: Spray 200 ml evenly on 100 kg seeds (2 l/ton seeds). PhytoGreen -WeedStarter can be applied together with chemical seed treatment. With proteins and vitamins: S Excellent adhesive properties S Fast drying S Improves the germination significantly In a closed container, protected from sun light, between 0 C and 20 C. 5 l 10 l 200 l 67

68 PhytoGreen -CerealMix EC-FERTILIZER MICRO NuTRIENT MIXTURE Highly concentrated nutrient mixture for cereals. Easy handling due to low application rates. 10,7 % Mn (166 g/l manganese) 4,5 % Zn (70 g/l zinc) 1,5 % Cu (23 g/l copper) 12,7 % MgO (197 g/l magnesium oxide) 1,8 % N (28 g/l carbamide N) PhytoGreen -CerealMix was developed in accordance with the nutrient demand of cereals. The suspension contains a very high nutrient concentration in order to minimize the application rate. This is possible due to the micronisation of natural raw materials. Density: 1,58 kg/l, ph = 10 Cereals (wheat, barley, triticale, rye, oats): To provide nutrients. For a higher yield, higher protein content. Improves winter hardiness and stability, increases the grain quality. 1-1,5 l/ ha from the beginning of vegetation in spring to 1-knot stage, and 1-2 l/ha between 3-leaf stage and at the end the tillering. PhytoGreen -CerealMix can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 0 C. 68

69 PhytoGreen -CerealMix Carbo EC-FERTILIZER MICRO NuTRIENT MIXTURE The well balanced nutrient mixture for cereals. Immediate uptake via the leaves and easy handling due to water soluble formulation. 1,4 % N (17 g/l nitrogen) 2,0 % MgO (25 g/l magnesium oxide) 1,0 % Cu (12 g/l copper) 3,0 % Mn (38 g/l manganese) 2,0 % Zn (25 g/l zinc) Density: 1,26 kg/l, ph = 2,9 PhytoGreen -CerealMix Carbo contains all nutrients in a water soluble form due to the use of low-molecular weight carboxylic acids. This kind of acids exist in a natural way in plants (e. g. formic, tartaric or citric acid). Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH) which deprotonate and which form water soluble carboxylic salts with nutrient ions like copper, manganese or zinc. Moreover, carboxylic acids promote growth and vitality of the culture as well as crop quality. Cereals (wheat, barley, triticale, rye, oats): To provide nutrients. For a higher yield, higher protein content. Improves winter hardiness and stability, increases the grain quality. 2-4 l/ ha from the beginning of vegetation in spring to 1-knot stage, and between 3-leaf stage and at the end the tillering. PhytoGreen -CerealMix Carbo can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Do not apply during blooming period! Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 0 C. 69

70 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -CornMix EC-FERTILIZER MICRO NuTRIENT MIXTURE Highly concentrated nutrient mixture for corn. Easy handling due to low application rates. 11 % Mn (170 g/l manganese) 6 % Zn (93 g/l zinc) 5% B (77 g/l boron) Density: 1,5 kg/l PhytoGreen -CornMix was developed in accordance with the nutrient demand of corn. The suspension contains a very high nutrient concentration in order to minimize the application rate. This is possible due to the micronisation of natural raw materials. Corn: To provide nutrients. For a higher yield. One foliar application with 2-3 l/ha or two foliar applications with 1-2 l/ha between 4- and 10-leaf-stage. PhytoGreen -CornMix can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Do not apply during blooming period! Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 0 C. 70

71 PhytoGreen -CornMix Carbo EC-FERTILIZER MICRO NuTRIENT MIXTURE The well balanced nutrient mixture for Zea mays. Immediate uptake via the leaves and easy handling due to water soluble formulation. 1,0 % Cu (12 g/l copper) 4,0 % Mn (50 g/l manganese) 2,0 % Zn (25 g/l zinc) 0,3% B (4 g/l boron) 0,1% Mo (1 g/l molybdenum) Density: 1,24 kg/l, ph = 2,7 PhytoGreen-CornMix Carbo contains all nutrients in a water soluble form due to the use of low-molecular weight carboxylic acids. This kind of acids exist in a natural way in plants (e. g. formic, tartaric or citric acid). Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH) which deprotonate and which form water soluble carboxylic salts with nutrient ions like copper, manganese or zinc. Moreover, carboxylic acids promote growth and vitality of the culture as well as crop quality. Corn: To provide nutrients. For a higher yield. One foliar application with 4-6 l/ha or two foliar applications with 3 l/ha between 4- and 10-leaf-stage. PhytoGreen -CornMix Carbo can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 20 l 200 l 1000 l Do not apply during blooming period! Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 0 C. 71

72 PhytoGreen -FruitColour EC-FERTILIZER; PK-FERTILIZER-LIQUID Induces fruit colour change (anthocyanins synthesis). Enhances fruit quality (ºBrix, sugar). P for healthy, well nourished and flavourful fruits. ph-neutral and not aggressive to plants. The active ingredient of the product: 5% P2O5 (water soluble phosphorpentoxide), 20% K2O (water soluble potassium oxide) complexed by low molucular weight carboxylic acids, ph-neutral PhytoGreen -FruitColour is formulated with phosphorous and potassium complexed by low molecular weight carboxylic acids, which have the distinction of being highly reactive and extremely useful to link any molecule to be introduced into the plant and to be transported internally quickly and efficiently. It is especially useful during ripening and fruit fattening, enhancing at the same time fruit quality (ºBrix, sugar), anthocyanins synthesis (colour) and polyphenols polymerization (skin maturing). But its use is highly recommendable in any crop stage that requires the specified P-K balance. Free of chlorides,nitrates and sulfates. Application rate: PhytoGreen -FruitColour has to be applied as leaf fertilizer with 2-3 l/ha with enough water to ensure a throughout coverage of the complete leaf area. Pome and pip fruit;grapes, vegetables: 2 applications 15 and 7 days before harvest. For pome and pip fruits repeart application directly after the first harvest. Strawberries: 2 applications 8 and 4 days before beginning of harvest and 1 applications after first harvest. PhytoGreen -FruitColour can be mixed with usual plant protection products. Technical data: Density: 1,35 kg/l, ph = 6,5 1 ltr. 10 ltr. 200 ltr ltr. 72

73 PhytoGreen -FruitCombi EC-Fertilizer Calciumnitrate solution with Magnesium and trace elements Supplies calcium, magnesium, boron, manganese and zinc - especially for fruits. Improves crop quality. 10,0% N (150 g total nitrogen/l equivalent to 140 g/l Nitrate-N + 10 g/l Ammonium-N) 10,0% Ca (150 g/l water soluble Calcium) 1,1% Mg (17 g/l water soluble Magnesium) 0,05% B (700 mg water soluble Boron/l) 0,50% Mn (7,6 g water soluble Manganese/l) 0,02% Zn (300 mg water soluble Zinc/l) Pip fruit: As soon as leaf area is sufficient, apply 2-5 l/ha as foliar application. After blooming until harvest foliar applications every days with 5-10 l/ha. Arable crops: As soon as leaf area is sufficient, apply 2,5-5 l/ha as foliar application every days. Berries: Several foliar applications with 2-6 l/ha from fruit blooming until harvest. PhytoGreen -FruitCombi can be mixed with usual plant protection products. However, since it is not possible to foresee all instances that may occur in practice it is in any case recommended to perform a trial first mixing the products intended to be used. In a closed container, protected from sun light, not below 4 C. 1 l 10 l 200 l 1000 l 73

74 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -RapeseedMix EC-FERTILIZER MICRO NuTRIENT MIXTURE Highly concentrated nutrient mixture for rape (Brassica napus). Easy handling due to low application rates. 4,8 % Mn (74 g/l manganese) 4,1% B (63 g/l boron) 0,5 % Mo (8 g/l molybdenum) 9,0% CaO (139 g/l calcium oxide) 9,2 % S (142 g/l sulphur) PhytoGreen -RapeseedMix was developed in accordance with the nutrient demand of rape. The suspension contains a very high nutrient concentration in order to minimize the application rate. This is possible due to the micronisation of natural raw materials. Density: 1,5 kg/l Rape: To provide nutrients. For a higher yield. One foliar application in autumn with 2-3 l/ha from 4-leaf-stage on and/ or one foliar application with 2-3 l/ ha before blooming. PhytoGreen -RapeseedMix can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 200 l 1000 l Do not apply during blooming period! Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 0 C. 74

75 PhytoGreen -RapeseedMix Carbo EC-FERTILIZER MICRO NuTRIENT MIXTURE The well balanced nutrient mixture for rape (Brassica napus). Immediate uptake via the leaves and easy handling due to water soluble formulation. 2,8% S (32 g/l sulphur) 2,0% MgO (22 g/l magnesium oxide) 2,0 % Mn (22 g/l manganese) 0,5% B (6 g/l boron) 0,1% Mo (1 g/l molybdenum) Density: 1,15 kg/l, ph = 5 PhytoGreen-RapeseedMix Carbo contains all nutrients in a water soluble form due to the use of low-molecular weight carboxylic acids. This kind of acids exist in a natural way in plants (e. g. formic, tartaric or citric acid). Carboxylic acids are a carbonic structure with one or more carboxylic groups (R-COOH) which deprotonate and which form water soluble carboxylic salts with nutrient ions like copper, manganese or zinc. Moreover, carboxylic acids promote growth and vitality of the culture as well as crop quality. Rape: To provide nutrients. For a higher yield. One foliar application in autumn with 5-7 l/ha from 4-leaf-stage on and/ or one foliar application with 5-7 l/ ha before blooming. PhytoGreen -RapeseedMix Carbo can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l Do not apply during blooming period! Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. Apply on dry leaves and at least two hours before irrigation or rain. In a closed container, protected from sun light not below 0 C. 75

76 PhytoGreen -CitrusMix EC-FERTILIZER MICRO NuTRIENT MIXTURE A suspension concentrate formulation of nutrient fertilizer elements for foliar application to Citrus crops. 5,5% Zn (70g zinc/l out of zinc oxide) 4,6% Mn (60g manganese/l out of Mn-carbonate) 1,6% B (20g boron/l out of borethanolamine) 0,8% Mo (10g molybdenum/l out of Na-molybdate) 4,7 % N (60 g ureic nitrogen/l) PhytoGreen -CitrusMix contains a carefully balanced blend of manganese, zinc, boron and molybdenum with ureic nitrogen, specifically formulated to meet the nutrient needs of citrus during the different growth stages. Density: 1,3, ph = 8 Citrus: Apply as a foliar spray liters/ha in at least 200 liters/ha water depending on the degree of deficiency. The 1st application starts on spring shoots before flowering. Apply as early in the growing season as possible providing there is adequate leaf cover. Repeat the application on summer and autumn shoots with the same dosage rate. Shake the container well before opening and use. Half fill the sprayer tank with clean water. Begin agitation and add the required quantity of Citrus Mix. Add the rest of the water and apply without delay. Maintain agitation while travelling and during the spraying operation. Avoid spraying during very strong sunlight, in temperatures above 25 C or when the crop is suffering from drought stress. Apply on dry leaves and at least two hours before irrigation or rain. PhytoGreen -CitrusMix can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of plants intended to be treated. 10 l 200 l 1000 l Pay always attention to nutrient demands of the culture as well as to the results of soil analysis. Do not exceed recommended application rates. In a closed container, protected from sun light not below 5 C. 76

77 In compliance with Council Regulation (EC) No 834/2007 on organic production PhytoGreen -CropCover1000 Wetting agent/ adhesion promoter BVL-No Adjuvant based on natural raw materials to enhance efficacy and compatibility of plant protection products and leaf fertilizers. The active ingredient of the product and its effects: Plant derived starch (Amylum) PhytoGreen -CropCover1000 reduces the surface tension of water and distributes the sprayed liquid uniformly across the leaf. Plant protectives and fertilizers applied together with PhytoGreen-Adhesive are taken up more effectively. The advantages: PhytoGreen -CropCover1000 has an outstanding compatibility for plants especially for sensitive cultures. Phytotoxicity of aggressive plant protectives, fertilizers and herbicides as well as stains following spraying are prevented. S S S S S S S S Excellent wetting /adhesive capability Outstanding compatibility for plants Prevents spray stains Supports fighting pests Very good miscibility Non-toxic for aquatic ecosystems Non-irritating No environmental specification To improve the efficiency of any plant treatment liquid, to reduce spraying stains: Add 4-8 l/ha to the application broth. Back carrier spray nozzle: 1-2 % of water amount. PhytoGreen -CropCover1000 can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first. 1 l 10 l 200 l 1000 l In a closed container, protected from sun light, between 0 C and 20 C. 77

78 PhytoGreen -ph Optima ph-regulator with Indicator, Adhesive and Wetting agent BVL-No Powerful ph regulator with integrated indicator for easy handling. Excellent wetting characteristics. Ensures efficacy of plant protection products and leaf fertilizers. 20 % carboxylic acids Density: 1,15 kg/l, ph = 1,6 The product contains 3% manganese. PhytoGreen -ph Optima is a ph-neutralizer for foliar solutions, that avoids the use of inorganic acids. The product contains carboxylic acids which exist in a natural way in plants (e. g. formic, tartaric or citric acid). When treating crops against pathogens, pesticide use requires that the ph of the application broth does not reach basic values, to avoid the alkaline hydrolysis of the active substance. Carboxylic acids moreover form complexes with ions like calcium-, magnesium or iron, which might be disruptive for the efficacy of plant protection products. Additionally, PhytoGreen -ph Optima increases the wetting characteristics of the application broth to enhance pesticides activity. Very hard and/or ion-rich water: Add PhytoGreen -ph Total as first component to the full water amount needed for the appilation, stir well and check ph. Alkaline plant protection products or leaf fertilizers: Add PhytoGreen -ph Total as final component to the application broth, stir well and check ph. Application rate: As a general rule it`s enough to add 50 ml PhytoGreen ph Optima to 100 l of application broth. Dependant to the ion content and ph of the water used, the application rate can be increased up to 100 ml/100 l application broth. Please take into account optimal ph range for the plant protection product which is going to be used! PhytoGreen -ph Optima can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l ph 7,0 ph 5,0 ph 4,5 Change of colour at ph 5,0 In a closed container, protected from sun light, not below 0 C. 78

79 PhytoGreen -ph Total ph-regulator, Adhesive and Wetting agent BVL-No Powerful ph regulator with excellent wetting characteristics. Ensures efficacy of plant protection products and leaf fertilizers. 20 % carboxylic acids Density: 1,16 kg/l, ph = 1,4 The product contains 3% manganese. Very hard and/or ion-rich water: Add PhytoGreen -ph Total as first component to the full water amount needed for the appilation, stir well and check ph. Alkaline plant protection products or leaf fertilizers: Add PhytoGreen -ph Total as final component to the application broth, stir well and check ph. PhytoGreen -ph Total is a ph-neutralizer for foliar solutions, that avoids the use of inorganic acids. The product contains carboxylic acids which exist in a natural way in plants (e. g. formic, tartaric or citric acid). When treating crops against pathogens, pesticide use requires that the ph of the application broth does not reach basic values, to avoid the alkaline hydrolysis of the active substance. Carboxylic acids moreover form complexes with ions like calcium-, magnesium or iron, which might be disruptive for the efficacy of plant protection products. Additionally, PhytoGreen -ph Total increases the wetting characteristics of the application broth to enhance pesticides activity. Application rate: As a general rule it`s enough to add 50 ml PhytoGreen - ph Total to 100 l of application broth. Dependant to the ion content and ph of the water used, the application rate can be increased up to 100 ml/100 l application broth. Please take into account optimal ph range for the plant protection product which is going to be used! PhytoGreen -ph Total can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l In a closed container, protected from sun light, not below 0 C. 79

80 In compliance with Council Regulation (EC) No 834/2007 on organic production CARBO-ECO ph EC-FERTILIZER MANGANESE FERTILIZER LIQUID ph regulator for application broth. 20 % carboxylic acids ph 1,82 The product contains 3% manganese. When treating crops against pathogens, pesticide use requires that the ph of the application broth does not reach basic values, to avoid the alkaline hydrolysis of the active substance. That is why using CARBO-ECO ph enhances pesticides activity. CARBO-ECO ph is a ph-neutralizer for foliar solutions, that avoids the use of inorganic acids. The product contains carboxylic acids which exist in a natural way in plants (e. g. formic, tartaric or citric acid). General: As a general rule it`s enough to add 50 ml CARBO-ECO ph to 100 l of application broth. Dependant to the ph of the water used, the application rate can be increased up to 100 ml/100 l application broth. Add CARBO-ECO ph as final component to the application broth and check ph. CARBO-ECO ph can be mixed with usual plant protection products. However, since it is not possible to foresee any or all instances that may occur in practice it is in any case recommended to perform a trial first and apply the mixture to a small quantity of products intended to be treated. 10 l 20 l 200 l 1000 l In a closed container, protected from sun light, not below 0 C. 80

81 Citrisol Softening agent Softening agent for spraying machines, hoses, nozzles etc.. The active ingredient of the product: 30% citric acid Citric acid is a colourless, water soluble carboxylic acid most common in plant tissue. Citric acids remove limescale and chelates unwanted ions like Calcium in hard water. Structural formula of citric acid (C 6 H 8 O 7 ) Citrisol as softening agent: Citrisol dissolves chalky deposits caused by water evaporation. Citrisol can be used to remove limescale in machines, hoses, nozzles and anywhere else. To descale directly use undiluted Citrisol. You can dilute Citrisol with water at a ration of 1:2 if an exposure time of at least one hour is possible. Wear protective gloves! 5 ltr. 10 ltr. 200 ltr ltr. In a closed container, protected from sun light, between 0 C and 20 C. 81

82 PhytoGreen -PowerClean Cleanser Cleaning agent for spraying machines and other machinery. Anionic and ionic tensides, amines, corrosion inhibitors and flavor PhytoGreen -PowerClean gently removes oily and fatty substances without acting corrosive. In order to prevent sedimentary deposition and clogging of filter and nozzles, spraying machines should be cleaned after each use. PhytoGreen -PowerClean steadily removes persistant residues of pesticides, fertilizers and other products. The advantages: Application: S S S S liquid suitable for all kind of machinery very intensive cleaning and degreasing provides a temporary anti-corrosion coating 1. Fill tank at least with 20% of the needed water amount. Add 0,5-1 l PhytoGreen -PowerClean/ 100 l water. 2. Pump jetting liquid into lines until all nozzles are getting rinsed. Rinse for 15 minutes while stirring. Only if residues are very persistent, leave jetting liquid for 24 hours. Application rate: The application rate depends on water hardness. The higher the mineral content of water, the more PhytoGreen -PowerClean has to be used: 3. Spray out complete jetting liquid via the nozzles. 4. Remove nozzles and filters afterwards. Clean seperately in a solution with 75 ml PhytoGreen - PowerClean/ 10 l water. Jetting liquid 100 l 250 l 500 l 1000 l Water hardness 1-2 (soft to middle, < 14 dh) Water hardness 3 (hard, 14-21,3 dh) Water hardness 4 (very hard, > 21,3 dh) 0,5 l 1,25 l 2,5 l 5 l 0,75 l 1,875 l 3,75 l 7,5 l 1 l 2,5 l 5 l 10 l 82

83 Leaf- and Fruitanalysis Please separate or copy next page

84 sampling protocol and Leaf-/ Fruit Analysis order Form Send sample to: Institut für Agrar- und Umweltanalytik Querfurter Straße 9 D Freyburg/Unstrut Tel.: +49 (0)34464/ info@iau-freyburg.de Customer information: Customer name: Street: Postal Code/City/ Country: Tel./ Fax: VAT-No.: Date of sampling: Free of charge advisory service by Phytosolution staff is wanted through (name ): Sample information: Lab- No. 1 Sample- No. Plot name Culture development stage (EC) (mandatory field!) desired analysis HE/SE 2 HE/SE+S 2 Comments (e.g. noticeable problem) 1 To be filled by the lab. 2 HE: Hauptelemente/ Main elements: N, Ca, K, P, Mg, Na; SE: Spurenelemente/ trace elements: Mn, Zn, Cu, B, Fe, Mo; +S: if sulphur wanted additionally The plant sample should be packed loosely, labeled clearly and easy to read, in solid paper bags (please do not use plastics). Send immediately to the testing laboratory with the accompanying analysis order form. The plant analysis allows a reliable diagnosis of the current nutritional status of the culture and is an important basis for any corrective fertilization. The analysis is limited to the study of green plants in the main growth phase. A conclusion on the soil conditions is often not possible because nutrient deficiency is often caused by ion antagonism, or adverse weather conditions. City, Date Signature

85 EXAMPLE OF a Leaf Analysis RESULT

86 Sampling of leaves Sampling should be distributed on the field at different places. No samples taken, if treated with pesticides or nutrients in the previous 3-5 days. For plant analysis approximately g fresh weight is required. The following plant parts should be taken: Plant Stages of Development (EC) Organ of Sampling Cereals Rape Maize tillering until boots swollen (28-45) possible; best timing during tillering (28-29) during development in the spring up to a plant height of cm possble: bud small (53), bud medium (55), bud big (57), beginning of flowering (62), flowering (64) cm plant height (EC 33-39) or during flowering (EC 61-69) Lucerne (Alfalfa) flower buds; beginning of flowering; full flowering complete plants cutted 5 cm above the ground youngest fully developed leaves without petiole fully developed medium leaves or corncob leaves shoot of first emergence; from beginning of flowering upper shout part (15 cm) Sunflower beginning of flowering (61) upper fully developed leaves Potatoes inflorescence emergence (51-59), beginning of flowering (60), end of flowering (69), tuber initiation (40) youngest fully developed leaves Sugar beet 8-10-leaf stage (18-19) until the end of August youngest fully developed medium leaves without petiole Grasses beginning of flowering (60) whole plant cuted 5 cm above ground Asparagus cm plant height (34-35) fully developed upper fern Wine at 10% open flowers (61) leaves opposite to the first flowerhood Strawberries beginning of flowering until full flowering (60-65) Pomaceous / stone fruit youngest, fully developed leaves from the centre of the plant late July - early August Leaves from the centre of this year's long shoots Fir trees spring until late summer one to two years old needles of upper shoot In other cultures, also upon the occurrence of deficiency- or excess-symptoms on individual leaves or plant parts, always total plants should be collected. Here, the minimum of sampling rate is 1-2 kg.