Hamilton Syringes. LT N LTN RN TLL TLL with slots. Hamilton Syringe Types Microliter. Hamilton Point Styles

Transcription

1 Hamilton LT N LTN RN TLL TLL with slots Hamilton Point Styles Pt. 2 Pt. 3 Pt. 5 Pt. HP Hamilton syringes are designed as precision measuring instruments, and find wide use for sample introduction into analytical instruments, as well as volume dispensers for accurate, small-scale dilutions. Hamilton Syringe Types Microliter - For use with liquids. It has an individually-fitted stainless steel plunger. Modified Microliter - For micro-sampling liquids, the entire sample is contained in the needle. A tungsten-wire plunger travels the length of the needle to displace the sample. Gastight - This features a precision PTFE plunger tip, for use with both gases and liquids. Syringe Terminations N RN TLL LT Hamilton Point Styles Point Style 2 - For septa penetration and GC injections Point Style 3 - For pipetting and HPLC injections Point Style 5 - Used to minimize septum coring Point Style HP - Used on Agilent 7673 / 1683 Autosamplers Syringe Terminations N, Cemented Needle - Needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark. Not autoclavable. RN, Removable Needle - Removable needles seat precisely to the zero graduation mark of the syringe; damaged needles are easily replaced. Autoclavable when disassembled. TLL, PTFE Luer Lock - The male luer taper accepts all luer-hub needles and connectors; locks luer hubs in place. Autoclavable when disassembled. LT, Luer Tip - Ground glass syringe barrel with a male luer taper accepts most hypodermic needles. Autoclavable when disassembled. LTN, Luer Tip Cemented Needle - Needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark. Not autoclavable. KH, Knurled Hub - The knurled hub, with replaceable needle, is used on 7000 series syringes only. Autoclavable when disassembled. The knurled hub enables high injection pressures and attachment of spacers, for repeatable-depth injections. LTN KH 108 Chromatography Research Supplies, Inc.

2 Hamilton Digital Syringe The only N.I.S.T. traceable, calibrated syringe device available Easy-to-read LCD displays volume dispensed within +/- 0.5% of the syringe volume Used with Hamilton syringes with total volumes of 0.5 to 500 µl Comes with certificates of analysis CRS offers the Hamilton Digital Syringe, for unsurpassed accuracy and precision. With the Digital Syringe, problems of plunger tip positioning and consistency are eliminated. Note: The handle can be used with any existing syringe of the types listed. However, it is only N.I.S.T. traceable with the serialized syringe that comes with it when ordered. Digital Syringe Microliter Digital Model Volume Gauge Length Pt. 2 Pt. 3 N- Cemented Needle 75 5 µl 26s 2 / 51 mm DS µl 26s 2 / 51 mm DS80300 DS µl 22s 2 / 51 mm DS µl 22s 2 / 51 mm DS80400 DS µl 22s 2 / 51 mm DS80500 DS µl 22s 2 / 51 mm DS80600 DS µl 22s 2 / 51 mm DS80700 DS µl 22 2 / 51 mm DS80800 DS80865 RN- Removable Needle 75 5 ul 26s 2 / 51 mm DS ul 26s 2 / 51 mm DS ul 22s 2 / 51 mm ul 22s 2 / 51 mm DS ul 22s 2 / 51 mm DS ul 22s 2 / 51 mm DS ul 22s 2 / 51 mm DS ul 22 2 / 51 mm DS80830 Gastight Digital Model Volume Gauge Length Pt. 2 Pt. 3 N- Cemented Needle µl 26s 2 / 51 mm DS80000 DS µl 22s 2 / 51 mm DS80200 DS µl 22s 2 / 51 mm DS80900 DS µl 22s 2 / 51 mm DS81000 DS µl 22s 2 / 51 mm DS81100 DS µl 22 2 / 51 mm DS81217* RN- Removable Needle µl 26s 2 / 51 mm DS µl 22s 2 / 51 mm DS µl 22s 2 / 51 mm DS µl 22s 2 / 51 mm DS µl 22s 2 / 51 mm DS µl 22 2 / 51 mm DS81230 *Cemented luer-tip needle (LTN)

3 Hamilton Microliter Microliter - This is the standard syringe for use with liquids. It has a stainless steel plunger individually fitted to the barrel. Microliter 700 Series - The standard Microliter syringe SM Explanation of Codes 5 µl 10 µl 25 µl 50 µl 100 µl 250 µl 500 µl Codes Model: N RN LT PT N- 6 pack RN- 6 pack Gauge/Length/Point 26s/2/2 26s/2/2 22s/2/2 22s/2/2 22s/2/2s 22s/2/2 22/2/2 N RN LT 600 Series - The compact Microliter syringe 2.5 µl 5 µl Codes Model: RN Gauge/Length/Point 22s/2/3 22s/2/3 KH Pt Series - The Microliter syringe with a handle and replaceable parts SM 5 µl 10 µl 25 µl 50 µl 100 µl 250 µl Codes Model: N RN Gauge/Length/Point 26s/2/2 26s/2/2 22s/2/2 22s/2/2 22s/2/2s 22s/2/2 Note: s with a gauge designates narrow-bore. For complete replacement needle listing, see page Chromatography Research Supplies, Inc.

4 Hamilton Microliter Hamilton Microliter, from left to right; 700, 800, 900 and 7000 series. 900 Series - The economical Microliter syringe with a handle SM 5 µl 10 µl Codes Model: N RN Gauge/Length/Point 26s/2/2 26s/2/ Series - The Modified Microliter syringe with the sample in the needle SM 0.5 µl 1 µl 1 µl 2 µl 2 µl 5 µl Codes Model: KH Gauge/Length/Point 25s/2.75/2 25s/2.75/2 22s/2.75/2 25s/2.75/2 23s/2.75/2s 24/2.75/2 Note: s with the gauge designates narrow-bore. Chaney (Reproducibility) Adapters For consistent, reproducible injections Prevents syringe plunger bending Adjustable stop prevents plunger damage Easily installed For 700, 1700 and 7000 series Chaney Adapters For 700, 1700; 10 µl For 700 above 10 µl; For 1700; µl For 800, For For 800, 900 and 1800 series Guide Assembly Prevents syringe plunger bending Adjustable stop prevents plunger damage Easily installed Guide Assembly For 700, 5 µl and 10 µl; For 700, 1700; above 10 µl For 7000 Series

5 Hamilton Gastight Gastight - This type of syringe features a precision-machined PTFE plunger tip, for use with both gas and liquid samples. N RN LT 1700 Series - The standard Gastight syringe SM 10 µl 25 µl 50 µl 100 µl 250 µl 500 µl Codes Model: N RN LT TLL Gauge/Length/Point 26s/2/2 22s/2/2 22s/2/2 22s/2/2 22s/2/2s 22/2/2 KH LTN TLL PT Series - The Gastight syringe with a handle and replaceable parts SM 10 µl 25 µl 50 µl 100 µl 250 µl Codes Model: N RN Gauge/Length/Point 26s/2/2 22s/2/2 22s/2/2 22s/2/2s 22s/2/2 Note: s with a gauge designates narrow-bore. For complete replacement needle listing, see page 112 Chromatography Research Supplies, Inc.

6 Hamilton Gastight 1000 Series - The high performance Gastight syringe SM 1 ml 1.25 ml 2.5 ml 5 ml 10 ml Codes Model: RN LT LTN TLL LTNPT Gauge/Length/Point 22/2/2 22/2/2 22/2/2 22/2/2 22/2/ Series, ml - The high performance Gastight syringe 25 ml 50 ml 100 ml Codes Model: TLL Super For air sampling, preparing gas standards, calibrating reservoirs PTFE luer lock termination for many applications Acrylic plastic barrel Hamilton Company s Super will handle your big jobs. These are suitable for many measuring and sampling applications in the lab and field. The PTFE luer lock fitting takes standard luer-hub needles (needles not included). Please note the acrylic barrel is not suitable for use with solvents. Volume SO L S L S L S L Super Syringe 113

7 Hamilton SampleLock Lock your sample in the SampleLock syringe with the easy-to-use twist valve Inject internal standards through the valve port into samples contained in the SampleLock syringe Pressurize gaseous samples prior to GC injection Prevent loss of sample and plunger blowout at elevated pressures with the positive rear plunger stop SampleLock SampleLock syringes allow you to collect, store, transport, and analyze liquid or gaseous samples without the danger of evaporative loss or environmental contamination. Common applications for SampleLock syringes include environmental sample collection and storage, pre-pressurization of gaseous samples for GC analyses, and sample spiking. The SampleLock syringe combines the quality of the world-renowned Hamilton Gastight syringe with an easy-to-use twist valve. The syringe is available in sizes ranging from 50 µl to 100 ml. A positive rear stop on the SampleLock syringe (250 µl to 100 ml) prevents plunger blowout and loss of sample. In addition, for improved precision and accuracy, the SampleLock syringes may be used in conjunction with Hamilton Company s new Digital Syringe. SampleLock syringes come with 2, point style 2 RN needles, 22 gauge (except 22s gauge for µl). Valve Operation - The SampleLock valve is easy to use; a simple twist is all it takes to open or close the valve. Open the valve by turning it so that the cap is in line with the fluid path. Close the valve by turning it so that the cap is perpendicular to the fluid path. Purge & Trap Syringe - A purge and trap (P & T) version of the SampleLock syringe is available in 5 ml capacity. It comes with a male luer fitting, and is designed for analysis of drinking water following methods such as EPA 502, 503 and 524. SampleLock Model Volume 1705SL 50 µl SL 100 µl SL 250 µl SL 500 µl SL 1.0 ml SL 2.5 ml SL 5 ml SLPT 5 ml P&T SL 10 ml SL 25 ml SL 50 ml SL 100 ml Chromatography Research Supplies, Inc.

8 Hamilton Specialty GC Syringe Pack This convenient package contains three of the most often needed syringes for GC: 701N (10 µl - standard liquid measuring device); 1702N ( 25 µl - for gas or liquid injections); 7001KH (1 µl - eliminates dead volume). GC Syringe Pack µl Syringe with Stainless Steel Needle For Capillary On-Column Injection Inject small samples directly onto columns (0.25 mm ID and greater) with this fine-diameter needle syringe. Capacity is 0.5 µl. The stainless steel needle has a 0.23 mm OD OC Syringe Spare Needle/Plunger Assembly Fused Silica Needle Syringe For Capillary On-Column Injection Hamilton combines their popular Microliter syringes with a needle made from fused silica (coated with high-temperature polyimide for strength), for direct injection onto your fused silica capillary column. The deactivated fused silica needles and precision syringe hubs and ferrules ensure accurate, reproducible and essentially inert sample handling. The needles are available in various lengths and they can be used with 10 µl Microliter syringes as well as the 10 µl Gastight syringe. Accuracy and reproducibility are within 1% of the syringe volume Fused-Silica Needle 701 RNFS Syringe, 10 µl capillary RNFS Syringe, 10 µl capillary Replacement Parts FS Needle, 10 cm x 0.17 mm OD PTFE Ferrule, 0.17 mm bore diameter Spacer

9 Hamilton GC Autosampler Dual Gauge 23s - 26s (Tapered) Needle for Agilent 7673 / 7683 Autosampler Provides the durability of a 23s gauge needle Ability of a 26s gauge needle to perform split/ splitless and on-column injections Model/ Capacity Gauge Microliter - The syringe without the PTFE-tipped plungers 700 Series Cemented Needle Syringe 5 µl 23s - 26s µl 23s - 26s Series Removable Needle Syringe 5 µl 23s - 26s µl 23s - 26s Gastight - The syringe with the PTFE-tipped plungers 1700 Series Cemented Needle Syringe 5 µl 23s - 26s µl 23s - 26s Series Removable Needle Syringe 5 µl 23s - 26s µl 23s - 26s Dual-Gauge Syringe Six-Packs for Agilent 7673A Cemented needle Storage container provided 23s - 26s Gauge Qty 5 µl Microliter 6/pk µl Gastight 6/pk µl Microliter 6/pk µl Gastight 6/pk for PerkinElmer Autosystem TM GC OD / Length / Pt. Style 5 µl 0.47 mm / / µl 0.63 mm / / , Chromatography Research Supplies, Inc.

10 Hamilton GC Autosampler Single Gauge Needle for Agilent 7673 / 7683 Autosampler Gauge 700 Series Cemented Needle Syringe Microliter 5 µl 23s µl 26s µl 23s µl 26s Series Removable Needle Syringe Microliter 5 µl 23s µl 26s µl 23s µl 26s Series Removable Needle Syringe Gastight 10 µl 23s µl 26s Replacement Needles, 6/pk, for Microliter or Gastight 23s s Single Gauge Syringe Six-Packs Agilent 7673 / 83 Cemented needle Microliter Storage container provided Capacity Gauge Qty 5 µl 23s 6/pk µl 26s 6/pk µl 23s 6/pk µl 26s 6/pk for Agilent 7670A, 7671A, 7672A Model / Capacity 700 Series Syringe, 26s Gauge 10 µl Cemented Needle µl Removable Needle Series Syringe, 26s Gauge 10 µl Cemented Needle µl Removable Needle Series Syringe, 25s Gauge 1 µl Knurled Hub Syringe Six-Pack for Agilent 7670A, 7671A, 7672A Syringe; Six 10 µl Hamilton 700 Series Microliter cemented needles Hamilton 700 Series Microliter syringe 117

11 Hamilton HPLC Autosampler for Waters WISP Autosampler 1700 Series Gastight 25 µl µl Priming Syringe for Waters Use for priming Waters HPLC pumps 501, 510, 610, 610E, 6000, 6000A Use for sampling with PrepLC 500A LCs Priming Syringe Rheodyne, Altrex, Valco VISF-2 Injectors 2 length OD Point style 3, no taper Model / Capacity Gauge 600 Series Removable Needle 2.5 µl 22s µl 22s Series Cemented Needle 10 µl 22s µl 22s µl 22s µl 22s µl µl Series Removable Needle 10 µl 22s µl 22s µl 22s µl 22s µl µl Removable Needle RN Style Capacity Gauge Qty For Rheodyne, Alex, Valco VISF-2 Injectors µl 22s 6/pk ml 22 6/pk For Valco VISF-1 Injectors µl 22s 6/pk ml 22 6/pk Chromatography Research Supplies, Inc.

12 Hamilton HPLC Autosampler and Carbon Analyzer for PerkinElmer - For series 200 Autosampler Capacity 1705CX 50 µl CX 250 µl CX 500 µl C 1.0 ml C 2.5 ml for Shimadzu - For SIL6A Autosampler Capacity 1710RN without Needle 100 µl for Themo Instruments Capacity For Autosampler models SP8780 / SP8875 / SP C 500 µl C 2.5 ml For Autosampler models AS100 / AS300 / AS1000 / AS3000 / AS C 250 µl C 500 µl C 1 ml C 2.5 ml C 5 ml Carbon Analyzer Syringe The Carbon Analyzer Syringe incorporates a special luer tapered hub cemented over a 700 Series syringe. The syringe is used in conjunction with total organic carbon analyzers to monitor waste water and environmentally sensitive water resources. Syringe parts in contact with sample are borosilicate glass, 302 stainless steel plunger and 304 stainless steel needle. Gauge 50 µl, 705CA Syringe µl, 705CA Syringe µl, 710CA Syringe µl, 725CA Syringe Carbon Analyzer Syringe 119

13 Pt. 2 Pt. 3 Pt. 5 Hamilton Needles Point Style 2 - For septa penetration and GC injections; 22 O bevel Point Style 3 - For pipetting and HPLC injections; blunt tip Point Style 5 - Used to minimize septum coring; conical point with side port Removable Needles for RN Style, 6/pk Point Style 2 Point Style 3 Point Style 5 For ul 22 gauge s gauge gauge s gauge For 250 ul - 10 ml 22 gauge s gauge gauge s gauge RN Style Needles Luer Lock Needles for Hamilton LT and TLL, 6/pk These are replacement needles for LT and TLL syringes. They are available with a metal (nickel-plated brass) or fluorocarbon (Kel-F) hub. Needles are made from type 304 stainless steel. Needles are 2 long and have point style 2, 3 or 5. Metal Hub Kel-F Hub OD x ID Metal Metal Metal Kel-F Kel-F Kel-F Gauge mm Point 2 Point 3 Point 5 Point 2 Point 3 Point x s.47 x x x s.71 x x x x Chromatographic Luer Hub Needles, 6/pk Made from 304 stainless steel tubing, 2 long Electrotapered Gauge Metal Hub CTFE Hub 22s s s Chromatography Research Supplies, Inc.

14 Accessories Needle Cleaning Kit This kit is specifically designed for cleaning syringes and needles. It includes one bottle of organic, biodegradable cleaning solution, and 10 each of five different diameter tungsten wires, ranging in diameter from to Suggested cleaning procedures are included. This kit is especially recommended for use with Hamilton needles and syringes. Needle Cleaning Kit Fine Wire Kit The CRS Fine Wire Kit lets you clean many small items around the lab; also useful for bending into microhooks, other uses. The kit contains a pin vise and 30 stainless steel wires, 10 of each of the following sizes: 0.006, and Please note: the wires in this kit cannot be used to clean 26s or 22s gauge needles. Fine Wire Kit Hamilton Syringe Cleaner The Hamilton Syringe Cleaner effectively cleans 7000 Series syringes by vaporizing residues with a combination of high heat (approximately 370 O C) and vacuum (0.1 mm Hg). The syringe needle is inserted through the septum for 30 seconds while the plunger is reciprocated several times. This cleaner is not effective against syringes with plugged needles or frozen plungers. Care should be used when handling because of the extreme temperature generated. The cleaner is available in 120 or 220 volt versions. Syringe Cleaner, 120 V Syringe Cleaner, 220 V

15 VICI Sampling Series A Syringe - Built-in Valve The Series A syringe is supplied with a turn valve for storage of samples at either sub-ambient pressures or elevated pressures to 17 bar (250 psi). The syringe eliminates back-flushing prior to injection because you can pressurize the sample. The Series A syringe contains a positive rear flange plunger stop to prevent blowout of the barrel at elevated pressures. The plunger is made of PTFE for leak tight fit. Series A Syringe 100 µl Series A Syringe µl Series A Syringe µl Series A Syringe ml Series A Syringe ml Series A Syringe ml Series A Syringe ml Series A Syringe Replacement Needles.028 OD x.005 ID, 2.25 Tapered OD x.012 ID, 2.25 Side Port Series A-2 Syringe - Push Button Valve This is one of the handiest syringes available for gas sampling. The Series A-2 features a unique push-button valve that allows sample storage capability in syringes as small as 25 µl. It is also useful for samples with low-boiling components that could be lost through evaporation. The push-button valve allows for pre-pressurizing the samples before injection. The A-2 syringe has very low dead volume due to the special needle and needle connector. Series A-2 Syringe 25 µl Series A-2 Syringe µl Series A-2 Syringe µl Series A-2 Syringe µl Series A-2 Syringe µl Series A-2 Syringe ml Series A-2 Syringe ml Series A-2 Syringe ml Series A-2 Syringe ml Series A-2 Syringe Replacement Needles.028 OD x.005 ID, 2 Bevel up to 100 µl Series A-2 Syringe OD x.012 ID, 2 Bevel up to 100 µl Series A-2 Syringe OD x.012 ID, 2 Side Port for all Series A Chromatography Research Supplies, Inc.

16 VICI Sampling Series C Syringe - without Valve This syringe has all the features of the Series A except the valve. It is useful for everyday in-lab sampling; low-cost. The Series C syringe has a special slip-on needle connector for a lower dead volume than the average luer-style connectors. 100 µl Series C Syringe µl Series C Syringe µl Series C Syringe ml Series C Syringe ml Series C Syringe ml Series C Syringe ml Series C Syringe Series C Syringe Replacement Needles.028 OD x.005 ID, 2.25 Tapered OD x.012 ID, 2.25 Side Port Series D Syringe- Economical The Series D syringe is a high-precision, no frills gas syringe. The syringe has a leak-tight Pressure-Lok plunger tip and no-dead-volume barrel design. 1 ml Series D Syringe ml Series D Syringe Series D Syringe Replacement Needles.028 OD x.005 ID, 2.25 Tapered OD x.012 ID, 2.25 Side Port Pressure-Lok Mini-Injector Injects as little as 0.01 µl. With this syringe you can directly inject small samples without using splitters, for improved reproducibility. The Pressure-Lok Mini-Injector uses a notched plunger within the needle; the fixed sample volume is contained in the notch. A PTFE packing seals the needle and plunger to prevent leakage. Available in two fixed volumes; needle length is 2 3/ µl Syringe µl Syringe

17 VICI Sampling Series CG-130 Syringe - Research Grade The Series CG-130 has a plunger gauged to stop at zero without bottoming out. This aids in stopping the needle from plugging or dislodging and enhances reproducibility. The CG-130 syringe handles gases or liquids and has a self-lubricating PTFE plunger tip. are color coded for identification. Series CG-130 Syringe 5 µl Fixed Needle Syringe µl Fixed Needle Syringe µl Removable Needle Syringe µl Removable Needle Syringe Replacement needles, 3/pk Series C-120 Syringe - Leak-Proof Seal The Series-120 is suitable for general purpose chromatography work. It comes equipped with a PTFE plunger and provides a leak tight seal to 17 bar ( 250 psi). This syringe can be used with liquids or gases. The Series-120 also includes a barrel extension beyond the rear flange, which permits attachment of a vacuum bulb or line for cleaning. Series C-120 Syringe 5 µl Fixed Needle Syringe µl Fixed Needle Syringe µl Fixed Needle Syringe µl Fixed Needle Syringe Series C-160 Syringe - High Quality The C-160 offers reliable performance at an economical price. A plunger tip of stress-formed virgin PTFE is self-lubricating and durable, and the PTFE needle seat at the rear of the needle prevents possible dissolution of the needle cement or contamination of the sample. Pressure rated at 17 bar (250 psi) maximum, gases and liquids. Replacement needles are open end bevel type, sized.019 x.005 x Series C-160 Syringe 5 µl Fixed Needle Syringe µl Fixed Needle Syringe µl Fixed Needle Syringe µl Fixed Needle Syringe µl Removable Needle Syringe µl Removable Needle Syringe µl Removable Needle Syringe µl Removable Needle Syringe Replacement Needles Replacement Needles, 3/pk Chromatography Research Supplies, Inc.

18 VICI Sampling Autosampler For PerkinElmer AS-100/300 and VICI models GC-311 and GC-411 Available for normal (standard) or viscous liquid samples. The viscous syringes use needles with wider IDs. Needle IDs for the standard syringe is.005. Needle IDs for the viscous syringes are listed below. 3 µl Standard Syringe µl Standard Syringe µl Standard Syringe µl Viscous Syringe µl Viscous Syringe µl Viscous Syringe Replacement Needles For 3 µl Standard Syringe For 5 µl Standard Syringe For 10 µl Standard Syringe For 3 µl Standard Syringe, ID For 5 µl Standard Syringe, ID For 10 µl Standard Syringe, ID Autosampler Syringe - For Agilent 7673A The Dynatech syringe for the Agilent 7673 / 7683A has the Pressure-Lok design and a PTFE plunger tip for greater precision and durability. The syringe has 10 µl capacity. 22 gauge, Blunt Needle Syringe gauge, Blunt Needle Syringe gauge, Bevel Needle Syringe