: All-Bond 3 Resin. SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

Transcription

1 Date of issue: 08/09/2018 Version: 2.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : All-Bond 3 Resin 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Use of the substance/mixture : For Rx Only Uses advised against 1.3. Details of the supplier of the safety data sheet Manufacturer: Bisco, Inc W Irving Park Road, Schaumburg, IL USA , during normal business hours EC Representative: Bisico France, 208, allée de la Coudoulette, Lançon de Provence, France Telephone: Emergency telephone number Emergency number : CHEMTREC - 24-Hour Hazmat Emergency Communications Center Domestic: Outside the U.S.: , collect calls accepted SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Skin corrosion/irritation, Category 2 H315 Serious eye damage/eye irritation, Category H319 2 Skin sensitisation, Category 1 H317 Specific target organ toxicity Single exposure, Category 3, Respiratory tract irritation Full text of H statements : see section 16 H335 Adverse physicochemical, human health and environmental effects May cause respiratory irritation. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayextra classification(s) to display Hazard pictograms (CLP) : Signal word (CLP) Hazardous ingredients Hazard statements (CLP) Precautionary statements (CLP) GHS07 : Warning : Ytterbium Fluoride ; BisGMA; 2-Hydroxyethyl Methacrylate : H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H335 - May cause respiratory irritation : P261 - Avoid breathing vapours P264 - Wash hands thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P272 - Contaminated work clothing should not be allowed out of the workplace P280 - Wear protective gloves, face protection, eye protection P302+P352 - IF ON SKIN: Wash with plenty of soap and water 12/13/2017 EN (English) 1/8

2 P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P312 - Call a POISON CENTER, a doctor if you feel unwell. P321 - Specific treatment (see First aid measures on this label) P332+P313 - If skin irritation occurs: Get medical advice/attention P333+P313 - If skin irritation or rash occurs: Get medical advice/attention P337+P313 - If eye irritation persists: Get medical advice/attention P362+P364 - Take off contaminated clothing and wash it before reuse P403+P233 - Store in a well-ventilated place. Keep container tightly closed P405 - Store locked up P501 - Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation, an approved waste disposal plant, a licensed hazardous-waste disposal contractor or collection site except for empty clean containers which can be disposed of as non-hazardous waste, a hazardous or special waste collection point Other hazards SECTION 3: Composition/information on ingredients 3.1. Substances 3.2. Mixtures Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] Ytterbium Fluoride (CAS-No.) Skin Irrit. 2, H315 Eye Irrit. 2, H319 STOT SE 3, H335 BisGMA (CAS-No.) Skin Irrit. 2, H315 Eye Irrit. 2, H319 Skin Sens. 1, H317 2-Hydroxyethyl Methacrylate (CAS-No.) (EC-No.) (EC Index-No.) X Skin Irrit. 2, H315 Eye Irrit. 2, H319 Skin Sens. 1, H317 Urethane Dimethacrylate (CAS-No.) Proprietary Eye Irrit. 2, H319 STOT SE 3, H336 Full text of H-statements: see section 16 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Call a poison center or a doctor if you feel unwell. : Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell. : Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. : Call a poison center or a doctor if you feel unwell Most important symptoms and effects, both acute and delayed Symptoms/effects after inhalation : May cause respiratory irritation. Symptoms/effects after skin contact : Irritation. May cause an allergic skin reaction. Symptoms/effects after eye contact : Eye irritation Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Water spray. Dry powder. Foam. Carbon dioxide. 12/13/2017 EN (English) 2/8

3 5.2. Special hazards arising from the substance or mixture Hazardous decomposition products in case of fire : Toxic fumes may be released Advice for firefighters Protection during firefighting : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment : Ventilate spillage area. Avoid breathing mist, vapours. Avoid contact with skin and eyes. : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection" Environmental precautions Avoid release to the environment Methods and material for containment and cleaning up Methods for cleaning up : Take up liquid spill into absorbent material. Other information : Dispose of materials or solid residues at an authorized site Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Use only outdoors or in a well-ventilated area. Avoid breathing mist, vapours. Avoid contact with skin and eyes. Wear personal protective equipment. : Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Storage conditions : Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Appropriate engineering controls: Ensure good ventilation of the work station. Hand protection: Protective gloves Eye protection: Safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment 12/13/2017 EN (English) 3/8

4 Environmental exposure controls: Avoid release to the environment. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Appearance Colour Odour Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) Vapour pressure Relative vapour density at 20 C Relative density Solubility Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. Other information SECTION 10: Stability and reactivity Reactivity : Liquid : Flowable paste. : Yellow. : Acrylic. The product is non-reactive under normal conditions of use, storage and transport Chemical stability Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid None under recommended storage and handling conditions (see section 7) Incompatible materials Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity (oral) Acute toxicity (dermal) Acute toxicity (inhalation) Urethane Dimethacrylate (Proprietary) LD50 oral rat LD50 dermal rat LD50 dermal rabbit 12/13/2017 EN (English) 4/8

5 Urethane Dimethacrylate (Proprietary) LC50 inhalation rat (ppm) LC50 inhalation rat (Dust/Mist - mg/l/4h) LC50 inhalation rat (Vapours - mg/l/4h) Ytterbium Fluoride ( ) LD50 oral rat LD50 dermal rat LD50 dermal rabbit LC50 inhalation rat (ppm) LC50 inhalation rat (Dust/Mist - mg/l/4h) LC50 inhalation rat (Vapours - mg/l/4h) mg/l/4h mg/l/4h mg/l/4h mg/l/4h 2-Hydroxyethyl Methacrylate ( ) LD50 oral rat LD50 dermal rabbit Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity 5564 mg/kg bodyweight (Rat; Experimental value) > 5000 mg/kg bodyweight (Rabbit; Experimental value) : Causes skin irritation. : Causes serious eye irritation. : May cause an allergic skin reaction. STOT-single exposure : May cause respiratory irritation. Urethane Dimethacrylate (Proprietary) LOAEL (oral, rat) LOAEL (dermal, rat/rabbit) LOAEC (inhalation, rat, gas) LOAEC (inhalation, rat, vapour) LOAEC (inhalation, rat, dust/mist/fume) mg/kg bodyweight mg/kg bodyweight ppmv/4h mg/l/4h mg/l/4h Ytterbium Fluoride ( ) LOAEL (oral, rat) LOAEL (dermal, rat/rabbit) LOAEC (inhalation, rat, gas) LOAEC (inhalation, rat, vapour) LOAEC (inhalation, rat, dust/mist/fume) STOT-repeated exposure mg/kg bodyweight mg/kg bodyweight ppmv/4h mg/l/4h mg/l/4h Urethane Dimethacrylate LOAEL (oral, rat, 90 days) LOAEL (dermal, rat/rabbit, 90 days) LOAEC (inhalation, rat, gas, 90 days) LOAEC (inhalation, rat, vapour, 90 days) LOAEC (inhalation, rat,dust/mist/fume, 90 days) (Proprietary) mg/kg bodyweight/day mg/kg bodyweight/day ppmv/6h/day mg/l/6h/day mg/l/6h/day Ytterbium Fluoride ( ) LOAEL (oral, rat, 90 days) LOAEL (dermal, rat/rabbit, 90 days) LOAEC (inhalation, rat, gas, 90 days) LOAEC (inhalation, rat, vapour, 90 days) LOAEC (inhalation, rat,dust/mist/fume, 90 days) Aspiration hazard mg/kg bodyweight/day mg/kg bodyweight/day ppmv/6h/day mg/l/6h/day mg/l/6h/day SECTION 12: Ecological information Toxicity Ecology - general Acute aquatic toxicity : The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment. 12/13/2017 EN (English) 5/8

6 Chronic aquatic toxicity Ytterbium Fluoride ( ) EC50 Daphnia mg/l 2-Hydroxyethyl Methacrylate ( ) LC50 fish mg/l (LC50; 96 h) EC50 Daphnia mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) EC50 Daphnia mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna; Static system; Fresh water; Experimental value) Threshold limit algae 1 Threshold limit algae mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water; Experimental value) 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water; Experimental value) Persistence and degradability 2-Hydroxyethyl Methacrylate ( ) Persistence and degradability Bioaccumulative potential Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the soil. 2-Hydroxyethyl Methacrylate ( ) BCF fish 1 Log Pow (BCF) (0.42; Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method; 25 C) Bioaccumulative potential Low potential for bioaccumulation (BCF < 500) Mobility in soil Results of PBT and vpvb assessment Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Waste treatment methods SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN : Dispose of contents/container in accordance with licensed collector s sorting instructions UN number UN-No. (ADR) UN-No. (IMDG) UN-No. (IATA) UN-No. (ADN) UN-No. (RID) UN proper shipping name Proper Shipping Name (ADR) Proper Shipping Name (IMDG) Proper Shipping Name (IATA) Proper Shipping Name (ADN) Proper Shipping Name (RID) Transport hazard class(es) ADR Transport hazard class(es) (ADR) IMDG Transport hazard class(es) (IMDG) IATA 12/13/2017 EN (English) 6/8

7 Transport hazard class(es) (IATA) ADN Transport hazard class(es) (ADN) RID Transport hazard class(es) (RID) Packing group Packing group (ADR) Packing group (IMDG) Packing group (IATA) Packing group (ADN) Packing group (RID) Environmental hazards Dangerous for the environment Marine pollutant Other information : No : No : No supplementary information available Special precautions for user - Overland transport - Transport by sea - Air transport - Inland waterway transport - Rail transport Transport in bulk according to Annex II of Marpol and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations Contains no REACH substances with Annex XVII restrictions Contains no substance on the REACH candidate list Contains no REACH Annex XIV substances National regulations Germany VwVwS Annex reference 12th Ordinance Implementing the Federal Immission Control Act - 12.BImSchV Netherlands SZW-lijst van kankerverwekkende stoffen SZW-lijst van mutagene stoffen NIET-limitatieve lijst van voor de voortplanting giftige stoffen Borstvoeding NIET-limitatieve lijst van voor de voortplanting giftige stoffen Vruchtbaarheid : Water hazard class (WGK) 3, severe hazard to waters (Classification according to VwVwS, Annex 4) : Is not subject of the 12. BlmSchV (Hazardous Incident Ordinance) 12/13/2017 EN (English) 7/8

8 NIET-limitatieve lijst van voor de voortplanting giftige stoffen Ontwikkeling Denmark Recommendations Danish Regulation : Young people below the age of 18 years are not allowed to use the product Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Other information Revision date :07/03/2018 Full text of H- and EUH-statements: Eye Irrit. 2 Serious eye damage/eye irritation, Category 2 Skin Irrit. 2 Skin corrosion/irritation, Category 2 Skin Sens. 1 Skin sensitisation, Category 1 STOT SE 3 Specific target organ toxicity Single exposure, Category 3, Narcosis STOT SE 3 H315 H317 H319 H335 H336 Specific target organ toxicity Single exposure, Category 3, Respiratory tract irritation Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation May cause respiratory irritation May cause drowsiness or dizziness SDS EU (REACH Annex II) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 12/13/2017 EN (English) 8/8