: Balance LED Clear Gel

Transcription

1 Date of issue: 20/03/2017 Revision date: : Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Balance LED Clear Gel Product code : LED Clear Type of product : Coating 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Main use category Industrial/Professional use spec Function or use category : Professional use : For professional use only : Coating Uses advised against 1.3. Details of the supplier of the safety data sheet NAIL SYSTEMS INTERNATIONAL 2 Union Hill Road W. Conshohocken, PA - UNITED STATES T or F Emergency telephone number Emergency number : Infotrac (800) Outside USA SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Skin Irrit. 2 Eye Irrit. 2 Skin Sens. 1 STOT SE 3 Full text of H-phrases: see section 16 H315 H319 H317 H Label elements Labeling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayextra classification(s) to display Hazard pictograms (CLP) : Signal word (CLP) Hazard statements (CLP) Precautionary statements (CLP) EUH phrases GHS07 : Warning : H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H335 - May cause respiratory irritation : P261 - Avoid breathing dust/fume/gas/mist/vapors/spray P264 - Wash hands, forearms and face thoroughly after handling P271 - Use only outdoors or in a well-ventilated area P272 - Contaminated work clothing should not be allowed out of the workplace P280 - Wear protective gloves/protective clothing/eye protection/face protection P302+P352 - IF ON SKIN: Wash with plenty of water : EUH210 - Safety data sheet available on request 2.3. Other hazards Adverse physicochemical, human health and : May cause respiratory irritation. Causes skin irritation. May cause an allergic skin reaction. 20/03/2017 EN (English US) SDS Ref.: Balance LED Clear 1/6

2 environmental effects Causes serious eye irritation. SECTION 3: Composition/Information on ingredients 3.1. Substance Not applicable 3.2. Mixture Comments : * NSI Gels are composed of a misture of Urethane Acrylate Oligomers. The Di-HEMA Trimethylhexyl Carbamate is the INCI designation for Urethane Dimethacrylate, which is the substantial equivilent of this mixture. Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] DI-HEMA TRIMETHYLHEXYL DICARBAMATE (CAS No) (EC no) Trimethylolpropane trimethacrylate (CAS No) (EC no) PEG-4 Dimethacrylate (CAS No) (EC no) Hydroxycyclohexyl phenyl ketone (CAS No) (EC no) METHYL BENZOYLFORMATE (CAS No) (EC no) Not classified Not classified 1-5 Not classified 1-5 Not classified Not classified PEG/PPG-27/27 DIMETHICONE Not classified TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE (CAS No) (EC no) (EC index no) X CI (Violet 2) (CAS No) (EC no) Repr. 2, H361f Not classified Full text of H-statements: see section 16 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Call a poison center/doctor/physician if you feel unwell. : Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor/physician if you feel unwell. : Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. : Call a poison center/doctor/physician if you feel unwell. Give water to drink if victim completely conscious/alert Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation : May cause respiratory irritation. Symptoms/injuries after skin contact : Irritation. May cause an allergic skin reaction. Symptoms/injuries after eye contact : Eye irritation Indication of any immediate medical attention and special treatment needed Treat symptomatically. If swallowed, seek medical advice immediately and show this container or label. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Water spray. Dry powder. Foam. Carbon dioxide Special hazards arising from the substance or mixture Explosion hazard Reactivity in case of fire Hazardous decomposition products in case of fire : Heating will cause rise in pressure with risk of bursting. : Carbon monoxide. : Toxic fumes may be released Advice for firefighters Protection during firefighting : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. 20/03/2017 EN (English US) SDS Ref.: Balance LED Clear 2/6

3 SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment : Ventilate spillage area. Avoid breathing vapors. Avoid contact with skin and eyes. : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection" Environmental precautions Avoid release to the environment Methods and material for containment and cleaning up Methods for cleaning up : Take up liquid spill into absorbent material. Other information : Dispose of materials or solid residues at an authorized site Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Use only outdoors or in a well-ventilated area. Avoid breathing vapors. Avoid contact with skin and eyes. Wear personal protective equipment. : Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Storage conditions : Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool Specific end use(s) SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Appropriate engineering controls Hand protection Eye protection Skin and body protection Respiratory protection Environmental exposure controls Consumer exposure controls : Ensure good ventilation of the work station. : Protective gloves : Safety glasses : Wear suitable protective clothing : In case of insufficient ventilation, wear suitable respiratory equipment : Avoid release to the environment. : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Viscous. Color : clear. Odor : Acrylic. Odor threshold ph Relative evaporation rate (butyl acetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature 20/03/2017 EN (English US) SDS Ref.: Balance LED Clear 3/6

4 Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Solubility Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidizing properties Explosion limits : Negligible Other information SECTION 10: Stability and reactivity Reactivity The product is non-reactive under normal conditions of use, storage and transport Chemical stability Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid None under recommended storage and handling conditions (see section 7) Incompatible materials Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard : Causes skin irritation. : Causes serious eye irritation. : May cause an allergic skin reaction. : May cause respiratory irritation. SECTION 12: Ecological information Toxicity Ecology - general : The product is not considered harmful to aquatic organisms or to cause long-term adverse effects in the environment Persistence and degradability Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment 20/03/2017 EN (English US) SDS Ref.: Balance LED Clear 4/6

5 12.6. Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Waste treatment methods SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN : Dispose of contents/container in accordance with licensed collector s sorting instructions UN number Not regulated for transport UN proper shipping name Proper Shipping Name (ADR) Proper Shipping Name (IATA) Transport hazard class(es) ADR Transport hazard class(es) (ADR) IATA Transport hazard class(es) (IATA) Packing group Packing group (ADR) Packing group (IATA) Environmental hazards Dangerous for the environment Other information : No : No supplementary information available Special precautions for user - Overland transport No data available - Air transport No data available Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations Contains no REACH substances with Annex XVII restrictions Contains no REACH candidate substance Contains no REACH Annex XIV substances National regulations Germany VwVwS Annex reference 12th Ordinance Implementing the Federal Immission Control Act - 12.BImSchV : Water hazard class (WGK) 2, hazardous to water (Classification according to VwVwS, Annex 4) : Is not subject of the 12. BlmSchV (Hazardous Incident Ordinance) Netherlands SZW-lijst van kankerverwekkende stoffen SZW-lijst van mutagene stoffen NIET-limitatieve lijst van voor de voortplanting giftige stoffen Borstvoeding : TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE is listed : None of the components are listed : None of the components are listed 20/03/2017 EN (English US) SDS Ref.: Balance LED Clear 5/6

6 NIET-limitatieve lijst van voor de voortplanting giftige stoffen Vruchtbaarheid NIET-limitatieve lijst van voor de voortplanting giftige stoffen Ontwikkeling Denmark Recommendations Danish Regulation : TRIMETHYLBENZOYL DIPHENYLPHOSPHINE OXIDE is listed : None of the components are listed : Young people below the age of 18 years are not allowed to use the product Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Other information Full text of H- and EUH-phrases: Eye Irrit. 2 Serious eye damage/eye irritation Category 2 Repr. 2 Reproductive toxicity Category 2 Skin Irrit. 2 Skin corrosion/irritation Category 2 Skin Sens. 1 Skin sensitization Category 1 STOT SE 3 Specific target organ toxicity (single exposure) Category 3 H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H335 May cause respiratory irritation H361f Suspected of damaging fertility EUH210 Safety data sheet available on request SDS EU (REACH Annex II) For EU Regulatory Inquiries, please contact: Biorius Rue de la Croyere 10A BE-7170 MANAGE Tel: Disclaimer: The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way coneected with the handling, storage, use or disposal of fthe product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. 20/03/2017 EN (English US) SDS Ref.: Balance LED Clear 6/6