5 th PAN ARAB ENDODONTIC CONFERENCE

Transcription

1

2 Dr. Adham Abdel Azim Sponsored by Venue: Future Endodontic Microscope Center, FUE Date: Tuesday 5th December 2017 (PreCongress) 9:00 13:00 Stress-Free Endodontics This hands-on course will guide you to provide an efficient three-dimensional instrumentation of the root canal space using new instrumentation techniques (XP Shaper & XP Finisher). you will be taught how to deliver a predictable endodontic treatment to your patients in a stress free, safe and more time efficient than you usually do. You will experience the elimination of hand fatigue, canal distortion and instrument separation. This course will be clinically oriented with brief didactic components to introduce the materials and techniques to be used. There will be instruction with and without the microscope. Goals & Objectives Learn about the latest instrumentation protocols for a predictable treatment outcome Accomplish 3 dimensional fills. Every participant should bring 2-3 teeth for this course. Fees: EDS Members 1500 Egyptian Pounds / Non Members 120 $ dollars FKG 2

3 Dr. Shehab Saber Sponsored by Venue: Future University of Egypt Date: Tuesday December 5th :00 13:00 Single File Systems: Time To Reciprocate in Blue The introduction of rotary nickel-titanium instruments has revolutionized root canal preparation. Nevertheless, unexpected instrument fracture is not uncommon after repeated use. Another concern is the possibility of cross-contamination associated with the inability to adequately clean and sterilize endodontic instruments. Therefore, the single use of endodontic instruments has been recommended to reduce instrument fatigue and possible cross - contamination. There are several single file systems in the market that vary in their metallurgy, design and mode of operation. Nevertheless, using a single instrument with sharp cutting edges to complete the preparation might result in canal aberrations and will subject it to a great deal of stresses. Also, there are serious concerns for their cleaning potential. The aim of this comprehensive course is to allow dental practioners and endodontists to learn and master cleaning and shaping of the root canal system using the Reciproc Blue files. Theoretical part: 1) Root canal preparation challenges. 2) Past and current attempts to overcome these challenges. 3) Introduction of single file systems. 4) Evaluate studies conducted to evaluate the performance of existing single file systems. 5) Answer the key question: Do single file systems satisfy our cleaning and shaping objectives? 6) Why Reciproc? Why Blue? Practical part: 1) Video presentations 2) Hands on demonstration 3) Preparation of severely curved root canals using the Reciproc Blue single file system. Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars VDW - Reciproc blue 3

4 Dr. Jean Philipe Mallet Sponsored by Venue: Future Endodontic Microscope Center, FUE Date: Tuesday 5th December 2017 (PreCongress) 13:00 17:00 2 Shape: Two files to Shape with a Safe and efficient new innovative file system: If cleaning and shaping are the paradigm of success of endodontic treatment, innovations are focused on the designs of the files such as cross sections, taper, helical angles and many other specifications that distinguish the identity of a specific instruments. These evolutions reduced significantly file breakage that nevertheless was still haunting NiTi users and pushed forward the researches into new directions. At the same time, GP aspire to an efficiency with soft sensations. Thermo-mechanical treatment of endodontic wires prior, during or post machining of endodontic files enhanced the flexibility of these files. These innovative treatment procedures opened the way for a totally new area of NiTi alloy with specific microstructural atomic composition. Combining the cumulative knowledge on file design and new heat treatment procedures, Micro Mega introduces the 2Shape The new file system comprises only two files in continuous rotation that can address most canal configurations. Before the workshop we will describe the system, and explain the way to use a simple, safe, efficient and short endodontic sequence in rotary motion. By the end of this Hands on Course attendees will be able to: - Understand the cleaning and shaping effect of 2Shape following a glide path and/or a Flare - Do easier and safer endodontic treatment - Appreciate the soft sensation of low stress for files and operator. Fees: EDS Members 1500 Egyptian Pounds / Non Members 120 $ dollars MicroMega 4

5 Dr. Guiseppe Cantatore Sponsored by Venue: Dusit Hotel (Hibiscus Hall) Date: Wednesday December 6th :00 13:00 Expanded glide-path preparation with a single ProGlider, Root canal shaping with the ProTaper Next, and root canal obturation with the GuttaCore Obturators. Theoretical Part 1 - Short presentation to introduce the features of the ProGlider and ProTaper Next, that allow the creation of an expanded glide-path and an adequate and conservative root canal preparation Practical Part 1 - Creation of an expanded glide-path using the Pro Glider. 2 - Root canal shaping with 2 files using the ProTaper Next. 3 - Protocol of irrigation based on the most recent studies. 4 - Root canal obturation using the GuttaCore Obturators. During the practical part, the demonstrator will show to the participants all the phases of the root canal shaping and obturation on resin or extracted teeth. Then the participant will repeat the sequence under supervision. A continuous interaction will be held during the course. Learning Objectives: At conclusion of this workshop, participants should be able to - Understand the importance of the glide path and learn how to create the glide path and remove coronal interferences at the same time using the ProGlider. - Understand the differences between PT Universal and PT Next. - Learn a protocol of instrumentation/irrigation based on the use of ProGlider and ProTaperNext. - Learn a protocol of use for the GuttaCore Pink Obturators. Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars Dentsply Sirona 5

6 Dr. Riccardo Tonini Sponsored by Venue: Dusit Hotel (Gardenia Hall) Date: Wednesday December 6 th :00 13:00 Touch base on Map System: the only way for simplifying the use of MTA in Endodontics. MTA has been identified as the gold standard bioactive material used for sealing and filling permanently different Endodontic complications. MTA, considering its wet sand consistency, is difficult to handle and position and due to this reason Map System has been proven being the best device for simplifying all the procedures that requires the application of MTA. The purpose of this workshop is to explain step by step howis simple today the use of MTA thanks Map System. This in depth, handson course is appropriate for both general dentists and specialists. Upon completion, the participating clinician should understand: - How to assemble Map System. - How to prepare MTA and keep it always in the right consistency. - How to repair root canal perforations. - How to perform a pulp cupping. - How to seal a floor perforation. - How to do a 3mm apical plug. - How to apply MTA in curved canals. WORKSHOP Each participant will be provided: - 3D printed model with reproduced all the clinical complications - MTA - CaOH - Map System - Fibrine - NiTi plugger - Paper points - Endodontic Micro-brush - Endodontic explorer - Plastic carriers - Gutta percha points Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars PD (Produits Dentaires) company 6

7 Dr. Josette Camilleri Sponsored by Venue: Dusit Hotel (Gardenia Hall) Date: Wednesday December 6th :00 17:00 Bioceramics in Clinical Endodontics Endodontic therapy involves the use of number of materials. The materials employed range from materials used to obturate the root canals namely gutta-percha points and root-canal sealers to root-end filling and perforation repair materials. The treatment success depends on how well these materials performed clinically to meet the needs of the particular procedure performed. Classically resin based sealers used in conjunction with gutta-percha points have been the gold standard and although no bonding is reported between self and gutta-percha the sealer ends micro mechanically to the dentine by penetrating the dentinal tubules and creating sealer tags. High success rates have been reported. For perforation repair and root-end filling the modified zinc oxide eugenol has shown considerable success. The introduction of mineral trioxide aggregation clinical dentistry has been revolutionary as the material is hydraulic and thus suitable for the particular clinical applications where control of moisture is impossible. Furthermore the highly alkaline environment created by hydration results in adequate antimicrobial properties and induction of cell growth and proliferation. Mineral trioxide aggregate has a number of disadvantages namely the claims of material impurity, tooth staining resulting form bismuth oxide, poor handling and long setting time. The new generation of tricalcium silicate-based cements known popularly as Bioceramics have improved properties and thus promise grater clinical success. The aim of this workshop is to demonstrate the use of these materials for various applications in clinical endodontics. Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars FKG 7

8 Dr. : Jenner Zepeda Venue: Duist Hotel (Lilly Hall) Date: Wednesday December 6 th :00 17:00 Predictable Root Canal Shaping and Advanced Obturation Techniques Using Novel Instrumentation and Obturation Systems, Aurum Blue + Eq-V. As endodontists, most of time our job is focused in doing root canal treatments for giving to patient s body a good environment to prevent or heal periapical pathosis. For achieving a positive outcome, root canal shaping and final obturation are two essential steps of the endodontic procedure. Nowadays, technological advances in the field of endodontics allowed the clinician to execute efficient mechanical root canal preparation and obturating the complex root canal system in a three-dimensional way with a relatively simplified and quick technique. The main goal of the workshop is to provide clinical and scientific information related to the use of Aurum Blue files as a root canal instrumentation system and the EQ-V as a versatile obturation armamentarium. LEARNING OBJECTIVES: At conclusion, participants should be able to list advantages, characteristics and clinical applications of Aurum Blue files. At conclusion, participants should be able to discuss the different obturation techniques that could be applied using the EQ-V System. At conclusion, participants should be able to describe all factors needed to be considered at the moment of deciding the shaping and obturation techniques to be used depending on the root canal anatomy and clinical scenario Participants : Duration : Fees : Members 1200 Egyptian Pounds / Non Members 100 $ dollars Meta Biomed 8

9 Dr. Kerstin Galler Dr.Shehab Saber Venue: Dusit Hotel (Gardenia Hall) Date: Thursday December 7 th :00 13:00 Evidence Based Regenerative Endodontics. Course description: The aim of this comprehensive course is to highlight the emergence of the novel biological based approach used to manage immature non-vital teeth. For many decades, apexification has been the routine practice, and despite a literature replete with discussion, including recent artificial barrier methods, there has been no major breakthrough to improve this treatment. Recently, two new clinical concepts have emerged. One involves a revitalization approach to achieve tissue generation and regeneration. In this method, new living tissue is expected to form in the cleaned canal space, allowing continued root development in terms of both length and thickness. The other is the active pursuit of pulp/dentine regeneration via tissue engineering technology to implant or re-grow pulps. This course will overview these recent concepts with emphasis on the tips and tricks for the clinical technique used. It is of special interest to endodontists, pediatric dentists as well as general practioners. After attending this course, each candidate will be able to; - Identify problems and past attempts associated with management of immature non- vital teeth. - Recognize key elements for regenerative endodontics. - Overview current literature from a tissue engineering perspective. - Identify the up to date, evidence based, clinical technique. - Prepare and place MTA apical plugs. - Prepare and place MTA coronal plugs with a barrier material. - Recognize expected clinical outcomes and success rate. 9

10 Time Activity 15 min Welcome and pre course knowledge quiz 20 min Lecture 1: The Past - Problems associated with of non-vital immature teeth - Past attempts to manage such cases with emphasis on treatment out comes for calcium hydroxide apexification versus MTA apical plug techniques. 45 min Lecture2: The Present - The emergence of regenerative endodontics as an alternative approach - Key steps for the clinical technique - Reviewing the literature - Treatment outcomes and new tissue characterization 30 min Lecture 3: The Future - Tissue engineering (Definition & Key elements) - Strategies (Cell based and non cell based de novo synthesis or in situ regeneration) 10 min Break 30 min Demonstration: MTA apical plug technique with and without apical matrix Preparation, application and removal of Bi antibiotic paste MTA coronal plug with barrier placement as part of REPs 30 min Practical: MTA apical plug technique MTA/Portland cement placement as part of REP Fees: Only 25 participants EDS Members 1200 Egyptian Pounds / Non Members 100$ dollars 10

11 Dr. James Prichard Sponsored by Venue: Dusit Hotel (Lilly Hall) Date: Thursday December 7th :00 13:00 From Shaping to Sealing: Cutting edge endodontics This course will teach delegates how to use recent advances in endodontic treatment to improve their patients clinical outcomes. Each delegate will have close supervision during hands-on training to maximise learning outcomes and time will be spent to give opportunities to address dentists questions and concerns. Prof. Prichard will take the delegates through the principles and objectives of successful endodontic treatment, including the biological principles of canal preparation and its link to current thinking on irrigation and disinfection. The limitations of previous thinking in endodontics will be addressed, which assumed that canals were round and that their preparations should also be. Delegates will learn how recent advances in NiTi metallurgy for the first time allow dentists to shape, finish and clean canals according to their true 3 Dimensional morphology. Delegates will see how you can not only clean far more of the canal system without sacrificing root dentine, but also fill it with ground-breaking new Bioceramics. Aims, Objectives & Anticipated Outcomes - Understanding the biological principles and objectives of successful endodontic treatment. - Understanding why 3 Dimensional cleaning and filling of the canal can improve your clinical success rate. - Learning about the new technologies behind the XP-endo range. Understanding how a single XP-endo Shaper file can instrument more of the canal more efficiently, generate less debris in the apical third and yet be less aggressive than traditional NiTi files. - Learning about the clinical uses and outcomes with XP-endo Shapers and Finishers. - Intensive hands-on training to help delegates successfully apply new technologies in practice. - Understand how the new TotalFill Bioceramic materials change the philosophies of obturation and dealing with root repairs. Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars FKG 11

12 Dr. Bruno Azevedo Venue: Dusit Hotel (Gardenia Hall) Date: Thursday December 7th :00 17:00 Dynamic CBCT imaging Navigation in Endodontics Course Outline and objectives: This course is designed to teach and update dentists and endodontists on how to systematically review 3D CBCT data to maximize imaging diagnosis in their practice. Lectures and cases will cover evidence-based practice techniques, focusing on advanced 3D navigation of small high resolution CBCT volumes acquired with J.Morita CBCT scanners. After this course, the participants should be able to: Adjust CBCT data Understand Imaging Artifacts and how to overcome them Interact with the data using a systematic 3D imaging navigation approach. Recognize advanced 3D anatomy of the Oral Maxillofacial region Develop differential diagnosis for lesions associated with endodontic scans Requirements: Bring a windows laptop (Windows 7 or higher) with at least 2 USB ports. Bring a mouse.. No apple laptops. Participants : Duration : Fees : Only 25 participants Members 1500 Egyptian Pounds / Non Members 120 $ dollars J Morita 12

13 Dr. Filippo Cardinali Sponsored by Venue: Dusit Hotel (Lilly Hall) Date: Thursday December 7th :00 18:00 Synergy between 2Shape and EndoUltra: from theory to practice a solution to simplify shaping and cleaning improving the quality of the root canal treatment Root canal shaping and cleaning are two essential steps of the root canal treatment to achieve a positive outcome. Nowadays the evolution of the instrumentation allows the operator to execute high quality totally mechanical root canal shaping and real efficient cleaning of the root canal system, allowing to get a goal that all operators chase: achieving high quality shaping and effective cleaning with less effort, in less time and safely. The aim of the hands-on course is to show how nowadays this goal is achievable using the 2Shape, the new shaping system created by MICRO-MEGA, and the EndoUltra, a wireless ultrasonic device dedicated to the cleaning of the root canal system. The main feature of the 2Shape is the heat treatment of the alloy, which combined the knowledge of MICRO-MEGA on the designs of the files such as cross sections, taper, helical angles and many other specifications led to the creation of a system consisting of only two very flexible and resistant to fracture file, that are able to shape also difficult canals respecting the original endodontic anatomy. The main feature of the EndoUltra is the simplicity of use thanks the wireless technology and the effectiveness of the cleaning. The combined use of this two system creates the ideal situation for a correct root filling allowing the clinician to hit the goals of endodontic treatment and achieve the success of the therapy. Attendees will have the opportunity to practice the teachings received using the 2Shape rotary files for the shaping and the EndoUltra device for the cleaning. Fees : Only 20 Participants 4 Hours EDS Members 1200 Egyptian Pounds / Non Members 100$ Dollars MicroMega 13

14 Dr. Tarek Salah Morsi Venue: Dusit Hotel (Lilly Hall) Date: Friday December 8th :00 15:00 Contemporary Management of Endodontically treated teeth; The fiber post era and Bonded Endocrowns The evolution in restorative dentistry is still in progress for the goal of producing better esthetic and biomechanically superior solutions for restoring mutilated endodontically treated teeth. Fiber posts have lately been replacing traditional metallic posts, due to their ability to reinforce the remaining tooth structure and their tooth color appearance. New innovative treatment modalities have been arising for managing severely destructed teeth using the latest CAD/CAM technologies and the recent ceramic materials. This workshop will provide the attendees with the latest information about fiber posts technology, their intended uses, and the ability to deal with difficult cases using this technique. It will also concentrate on preparation designs for ceramic onlays and endo-crowns and other restorative alternatives for root canal treated teeth. - Problems associated with endodontically treated teeth. - Decision making in treatment of such cases - Introduction to fiber post technology - Introduction to CAD/CAM and ceramics technologies - Reinforcing badly mutilated roots - Different treatment approaches and future implications - Practical session comprising training on fiber post application, insertion and bonding, with core build up using the latest state of the art materials - Practical session for training on different preparations for ceramic onlays and endo-crowns, with bonding of such restorations. Fees : 6 hours EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars Credit Hours : 6 CE 14

15 Mr. Larry Guzzardo Venue: Dusit Hotel (Gardenia Hall) Date: Friday December 8th :00 12:00 Unravel the Mystery of Marketing Professional Endodontic Services (3 hours) Demystify the steps to marketing your practice. This presentation will simplify your ability to transition your current systems, so you and your team can market your services professionally and efficiently. By removing the guesswork surrounding what works best, you ll learn how easy it can be. You ll be inspired and motivated to accelerate your transition. This exciting lecture develops the communications skills, the processes and systems necessary to educate patients and increase referrals. You ll leave with a specific plan for providing exceptional patient care to build a highly productive practice that encourages patients to choose your office for care. You will learn how to: Present a professional image to patients Distinguish yourself as an expert in your field Determine marketing systems to attract patients who are seeking the services you can provide Increase patient referrals Fees: 50 participants 3 hours EDS Members 450 Egyptian Pounds / Non Members 50 $ dollars Credit Hours : 3 CE 15

16 Dr. Antonis Chaniotis Sponsored by Venue: Dusit Hotel (Gardenia Hall) Date: Friday December 8th :00 17:00 Making the endodontic management of complicated canal systems simple, safe and predictable. A new approach with Hyflex CM and EDM files Description: The design and biological objectives of root canal treatment manipulation are well described in the contemporary art of Endodontics. Achieving these objectives in straight canals is considered a simple and straightforward procedure with all instrumentation systems available today. The problems of biomechanical instrumentation and obturation of the root canal systems arise when the internal anatomy of human teeth is rendered severely curved or even bifurcated and anastomotic. In such teeth, the accepted basic endodontic techniques and instrumentation protocols may be challenging to follow. The aim of this workshop is to describe and practice a new instrumentation technique with Hyflex controlled memory (CM) and electrical discharge machined (EDM) files for the safer and more predictable instrumentation of severely curved and challenging canals systems Workshop objectives At the end of this workshop the participant will manage to Understand the biological objectives of root canal treatment manipulation in relation to each anatomical challenge. Understand and appreciate the controlled memory thermomechanical processing and electrical discharge machining for the manufacturing of rotary files. Understand the philosophy behind the new instrumentation technique Practice the novel technique in highly curved and doubled curved training blocks. Achieve a three dimensional obturation of the prepared root canal system by using greater taper gutta-percha points in combination with Gutta-flow bioseal. Take away tips and hints to use them in the everyday practice. Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars Coltene 16

17 Dr. Guiseppe Cantatore Sponsored by Venue: Dusit Hotel (Hibiscus Hall) Date: Friday December 8th :00 17:00 Theoretical Part Short presentation to introduce the features of the WaveOne Gold and WaveOne Gold Glider, reciprocating files that allow the creation of an expanded glide-path and an adequate and conservative root canal preparation using a single file. Practical Part 1) Creation of an expanded glide-path using the WaveOne Gold Glider. 2) Root canal shaping with a single file using the WaveOne Gold. 3) Protocol of irrigation based on the more recent studies. 4) Root canal obturation using the GuttaCore Obturators. During the practical part, demonstration will show to the participants all the phases of the root canal shaping and obturation on resin or extracted teeth. Then the participant will repeat the sequence under supervision. A continuous interaction between the teacher and the participants will characterize the workshop. Learning Objectives: At conclusion, participants should be able to: - Understand the importance of the glide path. - Learn how to create an expanded glide path and remove coronal interferences in a few seconds using the WaveOne Gold Glider. - Learn how to shape a root canal with a single file in reciprocating motion. - Learn a protocol of obturation for the GuttaCore obturators. Fees: EDS Members 1200 Egyptian Pounds / Non Members 100 $ dollars Dentsply Sirona 17

18 Dr. Bertrand Khayat Venue: Future Endodontic Microscope center FUE Date: Saturday December 9 th :00 14:00 Practical use of new ultrasonics tips in conventional endodontic The use of ultrasonic tips in conjunction with the operating microscope has become part of the routine endodontic treatment. This has enhanced our performance and enables us to treat more complex cases. Locating canals, repairing perforations, removing broken instruments have become more predictable procedures. The presentation will focus on the design and structure of new ultrasonic tips and will be illustrated by many clinical examples. After the lecture, demonstrations will be made on specific models. Each participant will reproduce the demo on the model and should also bring extracted teeth with some complexities (broken instrument) to be treated during the workshop. The use of the endo success retreatment kit will be explained in detail. Participants : Duration : Fees : 5 hours Members 1500 Egyptian Pounds / Non Members 120 $ dollars Acteon Credit Hours : 5 CE 18

19 Dr.Ahmed Hashem Dr. Stephen P. Niemczyk Dr. Mohamed Fayed Dr. Adham Azim Venue : Future University of Egypt Dates : 9 and 10 December 2017 Clinical Microsurgery Course Many advances have been made in endodontic surgery in the past years. These include enhanced magnification and illumination, ultrasonic preparation, micro-instruments, newer root end filling materials and the use of cone beam computed tomography (CBCT). These advances have significantly improved surgical outcome and predictability. In this course, the different applications of CBVT in diagnosis, treatment planning and long term outcome evaluation of periapical surgery will be reviewed. Video footage of clinical cases from start to completion will be utilized to demonstrate the application of each technology in endodontic microsurgery. Day One: Introduction and presentation of 2 days workshop schedule and objectives:( All lectures will be 60 minutes) Lecture 1: Introduction to Endodontic Microsurgery (Dr Ahmed Hashem) Lecture 2: Armamentarium and flap designs in Surgical Endodontics. (Dr. Adham Azim). Lecture 3: CBCT in treatment planning of Periapical Surgery. (Dr. Mohamed Fayad). Taking the fear out of Periapical Surgery: Lecture 4: Molar surgery and Intentional Replantation (Dr. Stephen P. Niemczyk) Lecture 5: Grafting techniques and materials and its impact on surgical outcome. (Dr. Mohamed Fayad) Lecture 6: Management of Surgical Complicated cases (Dr. Adham Azim). 19

20 Day Two: AM: Live Molar surgery: Dr. Mohamed Fayad. PM: Participants performing surgical procedures on patients under supervision of the 4 speakers. Day 1: Timetable 08:30-09:30 Registration 09:30-10:30 lecture 1 10:30-11:30 lecture 2 11:30-12:00 break 12:00-01:00 lecture 3 01:00-02:00 Lecture 4 02:00-03:00 Lunch break 03:00-04:00 Lecture 5 04:00-05:00 Lecture 6 Only 12 participants are allowed, each participant will perform a microsurgery on a patient using the endodontic microtools by the aid of microscope magnification under supervision. Fees :750 $ Credit Hours : First day 8 CE Total Credit hours : 16 CE 20

21 21