THE NEW DNA OF HIGH-STRENGTH GLASS CERAMICS.

Transcription

1 CEREC & INLAB 2015 BLOCKS & ACCESSORIES GUIDE

2 THE NEW DNA OF HIGH-STRENGTH GLASS CERAMICS. BEAUTY. STRENGTH. SPEED. Introducing a new class of material for high strength glass ceramics brought to you by DENTSPLY (ZLS) zirconia-reinforced lithium silicate. Like a graceful, yet powerful steed, Celtra surges with a new gold standard in aesthetics, strength and speed for an all-ceramic alternative solution. FEATURES The new DNA of high-strength glass ceramics Zirconia-reinforced lithium silicate microstructure for optimized balance of translucency and opalescence High Translucency Low Translucency Choice of flexural strength: 210 MPa 370 MPa Chameleon Effect Wear Resistance Easy To Polish Indicated for single-unit anterior and posterior crowns, single-tooth implant superstructures, as well as inlays, onlays and veneers CHOOSE YOUR FLEXURAL STRENGTH 210 MPa Mill & Polish 370 MPa Glaze & Fire DENTSPLY Canada Ltd. 161 Vinyl Court Woodbridge, ON L4L 4A3

3 TABLE OF CONTENTS Blocks Implantology Milling CEREC Accessories Accessories Finishing Imaging... 24, 25 Milling Burs Preparation Burs for Ceremics Stains... 26, 28 Suggestions for Sartup Supplies inlab Coping and Frameworks Milling Patterson Office Supplies Printed Poster... 35

4 SIRONA CAD/CAM MATERIALS. TOP QUALITY GEARED TO HIGH DEMANDS. All-ceramic restorations fabricated on Sirona s CAD/CAM systems have proved themselves millions of times in clinical practice. To fulfill the highest standards in terms of quality and machinability we are continuously developing high-performance materials and accessories which are tailored to our design software and our CEREC/inLab milling units. Enjoy every day. With Sirona. UNLIMITED COMPATIBILITY with Sirona s milling units HIGH PERFORMANCE MATERIALS for maximum milling and precision requirements DIRECT MATERIAL SELECTION in the inlab and CEREC software SIRONA.COM

5 Blocks Milling CEREC Full Contour Block Refills Sirona Fine-structure feldspar ceramic blocks Easy to polish; similar to natural tooth enamel in terms of abrasion properties Available in translucent (T), medium (M) and opaque (O) All refills can be used in combination with VITA Classical A-D Shade system as well as VITA 3D-Master Shade system Size Shade Qty Item # 8 S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg S0-M 8/Pkg S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg S0-M 8/Pkg S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg CEREC Blocs PC Sirona Polychromatic (PC) blocks for natural-looking anterior and posterior crowns Consists of 3 layers (translucent upper layer, intermediate dentine layer with normal shade intensity and strongly pigmented lower layer), each with different colour saturation (chroma); permits optimum adaptation of the restoration in terms of translucency and intensity Natural enamel-dentine-cervix layering Can be virtually aligned in the milling preview of the software Alternative to ceramic-faced crowns Outstanding enamel-like abrasion properties and good polishability; can be immediately polished and placed after milling S2-PC 12 8/Pkg S3-PC 12 8/Pkg S4-PC 12 8/Pkg S2-PC 14 8/Pkg S3-PC 14 8/Pkg S4-PC 14 8/Pkg S2-PC 14/14 8/Pkg S3-PC 14/14 8/Pkg S4-PC 14/14 8/Pkg Vita suprinity Blocks vident VITA SUPRINITY is a new generation of glass ceramic material. With the aid of an innovative manufacturing process, the glass ceramic is enriched with approximately 10% zirconia by weight, resulting in the world s first zirconia reinforced lithium silicate ceramic. The material features a special fine-grained, homogeneous structure that provides excellent material quality and consistency, high load capacity and long-term reliability. Moreover, the material also offers outstanding processing characteristics, including easy milling and polishing. Thanks to a high degree of translucency, fluorescence and opalescence, VITA SUPRINITY provides excellent aesthetic properties. VITA SUPRINITY Clinical Starter Kit Contains 1 each HT 5-pack blocks, 1 each T 5-pack blocks, 1 Vita Akzent plus glaze LT spray, 1 fibrous pad firing support, 1 pack of 2 platinum pins, 1 VITA SUPRINITY polishing set clinical and 1 working instructions Kit VITA SUPRINITY Sample Sets 14mm A1T/A1HT A2T/A2HT VITA SUPRINITY Blocks 18mm x 14mm x 12mm 0M1 High LS-14 5/Pkg Translucency A1 High LS-14 5/Pkg Translucency A2 High LS-14 5/Pkg Translucency A3 High LS-14 5/Pkg Translucency A3.5 High LS-14 5/Pkg Translucency B2 High LS-14 5/Pkg Translucency C2 High LS-14 5/Pkg Translucency D22 High LS-14 5/Pkg Translucency 0M1 Translucent LS-14 5/Pkg A1 Translucent LS-14 5/Pkg A2 Translucent LS-14 5/Pkg A3 Translucent LS-14 5/Pkg A3.5 Translucent LS-14 5/Pkg B2 Translucent LS-14 5/Pkg C2 Translucent LS-14 5/Pkg D2 Translucent LS-14 5/Pkg pattersondental.ca 5

6 Blocks Milling (cont.) Vita Enamic Vident Dual network structure With this dental material, the dominant ceramic network is reinforced by a polymer network with both networks fully penetrating one another VITA ENAMIC is a dental hybrid material that combines the positive characteristics of a ceramic and a composite High strength, this innovative hybrid material also ensures exceptional elasticity The material is perfectly suited for crown restorations in the posterior area and enables the reduction of wall thickness for minimally invasive restorations This tooth-coloured hybrid material offers material properties that are almost identical to those of natural teeth and ensures natural aesthetics due to its excellent light conductivity 0M1 High 10 mm 5/Pkg Translucency 1M1 High 10 mm 5/Pkg Translucency 1M2 High 10 mm 5/Pkg Translucency 2M2 High 10 mm 5/Pkg Translucency 3M2 High 10 mm 5/Pkg Translucency 0M1 High 14/14 5/Pkg Translucency mm 1M1 High 14/14 5/Pkg Translucency mm 1M2 High 14/14 5/Pkg Translucency mm 2M2 High 14/14 5/Pkg Translucency mm 3M2 High 14/14 5/Pkg Translucency mm 0M1 Translucent 14/14 5/Pkg mm 1M1 Translucent 14/14 5/Pkg mm 1M2 Translucent 14/14 5/Pkg mm 2M2 Translucent 14/14 5/Pkg mm 3M2 Translucent 14/14 5/Pkg mm 1M1, 2M2 High 14/14 5/Pkg Translucency mm VITABLOCS TriLuxe Vident Polychromatic feldspar ceramic blocks Provides excellent CAD/CAM aesthetics; feature 3 levels of tooth shades representing the enamel, dentine and cervical tooth areas within the same block Indicated for crowns in both the anterior and posterior regions 1M2C Tri 14 5/Pkg M2C Tri 12 5/Pkg M2C Tri 12 5/Pkg A1 Tri 14/12 5/Pkg A2 Tri 14/12 5/Pkg A3 Tri 14/12 5/Pkg M2C Tri 14/14 5/Pkg M2C Tri 12 5/Pkg M2C Tri 12 5/Pkg M2C Tri 14/14 5/Pkg M2C Tri 14/14 5/Pkg VITABLOCS RealLife Vident Cannot be milled on CEREC 3 compact milling unit Provides more accurate and detailed simulation of natural tooth structure and aesthetics Eliminates need for characterizing with stains or individualizing with layered veneering materials Position of restoration in the block can be changed with software to reproduce shade effect in regard to translucency, chroma and lightness Fast, simple and natural chairside anterior restorations Design flexibility with movement in all 3 spatial directions 0M1 RL-14/14 5/Pkg M1 RL-14/14 5/Pkg M2C RL-14/14 5/Pkg M1 RL-14/14 5/Pkg M2C RL-14/14 5/Pkg M2C RL-14/14 5/Pkg VITABLOCS TriLuxe Forte Vident Polychromatic feldspar ceramic blocks; for CEREC and inlab Provide excellent CAD/CAM aesthetics; feature fine nuances of shade transition from the incisal edge to the cervical area More intense colour saturation; increased fluorescence provides unsurpassed shade effects and a chameleon blend with natural dentition Efficient processing with fully computerized work process Eliminates need for traditional porcelain layering or pressing Simple bonding to zirconia substructure with resin cement Clinically proven wear and abrasion behavior CEREC MC milling unit cannot mill size 40/19 1M2C TF 12 5/Pkg M2C TF 12 5/Pkg M2C TF 12 5/Pkg A1 TF 12 5/Pkg A2 TF 12 5/Pkg A3 TF 12 5/Pkg M2C TF 14/12 5/Pkg M2C TF 14/12 5/Pkg M2C TF 14/12 5/Pkg A1 TF 14/12 5/Pkg A2 TF 14/12 5/Pkg A3 TF 14/12 5/Pkg M2C TF 14/14 5/Pkg M2C TF 14/14 5/Pkg M2C TF 14/14 5/Pkg M2C TF 40/19 2/Pkg M2C TF 40/19 2/Pkg M2C TF 40/19 2/Pkg VITA CAD-Temp Multi-Colour Vident Composite blocks for the milling of high quality, fully and partially anatomical long-term provisional crowns and multi-unit bridges. Can be perfectly milled with the diamond burs of the inlab or CEREC system Eliminates time-consuming removal of excess material Exhibits lasting colour stability and natural fluorescence Can be customized with the light-curing veneering composite VITA VM LC Compatible with all provisional cements Saves time and labour 1M2T CT-40 2/Pkg M2T CT-40 2/Pkg M2T CT-40 2/Pkg M2T CT-40 10/Pkg M2T CT-40 10/Pkg M2T CT-40 10/Pkg For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

7 Blocks VITA CAD-Temp Vident Composite blocks for milling high quality, fully and partially anatomical long-term provisional crowns and multiunit bridges; Eliminates time consuming removal of excess material Exhibits lasting colour stability and natural fluorescence Can be customized with the light-curing, veneering indirect composite VITA VM LC Compatible with all provisional cements Saves time and labour CEREC MC X can mill size CT 40; CEREC MC XL, MC XL Practice Lab and inlab MC XL can mill all available sizes 0M1T CT-40 2/Pkg M2T CT-40 2/Pkg M2T CT-40 2/Pkg M2T CT-40 2/Pkg M1T CT-40 10/Pkg M2T CT-40 10/Pkg M2T CT-40 10/Pkg M2T CT-40 10/Pkg M2T CT-55 Each M2T CT-55 Each M2T CT-55 Each VITA VITABLOCS Mark II Classical Shades Vident Monochromatic, fine particle nethaline feldspar ceramic blocks used for CAD/CAM dental restorations Indicated for inlays, onlays, veneers and anterior and posterior crowns A1 I8 5/Pkg A2 I8 5/Pkg A3 I8 5/Pkg A1 I10 5/Pkg A2 I10 5/Pkg A3 I10 5/Pkg A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A2C I14 5/Pkg A1C I14 5/Pkg A3C I14 5/Pkg VITA VITABLOCKS Mark II 3D-Master Shades for CEREC and inlab Vident Highly translucent, monochromatic fine particle feldspar ceramic blocks used for CAD/CAM dental restorations Indicated for anterior and posterior crowns, veneers, inlays and onlays Excellent shade matching with the patient s remaining tooth structure 1M1C I8 5/Pkg M2C I8 5/Pkg M1C I8 5/Pkg M2C I8 5/Pkg M3C I8 5/Pkg M1C I8 5/Pkg M2C I8 5/Pkg M3C I8 5/Pkg M2C I8 5/Pkg M1C I10 5/Pkg M2C I10 5/Pkg M1C I10 5/Pkg M2C I10 10/Pkg M3C I10 5/Pkg M1C I10 5/Pkg M2C I10 5/Pkg M3C I10 5/Pkg M2C I10 5/Pkg M1C I12 5/Pkg M1C I12 5/Pkg M2C I12 5/Pkg M1C I12 5/Pkg M2C I12 5/Pkg M3C I12 5/Pkg M1C I12 5/Pkg M2C I12 5/Pkg M3C I12 5/Pkg M2C I12 5/Pkg M1C I14 5/Pkg M1C I14 5/Pkg M2C I14 5/Pkg M1C I14 5/Pkg M2C I14 5/Pkg M3C I14 5/Pkg M1C I14 5/Pkg M2C I14 5/Pkg M3C I14 5/Pkg M2C I14 5/Pkg IPS e.max CAD High Translucency Ivoclar Composite glass-ceramic blocks (lithium-disilicate) used for CAD/CAM ceramic tooth restorations including veneers, inlays, partial crowns and crowns Blue, delivered in precrystallized form that is ideal for milling smaller restorations (e.g., inlays, onlays) After milling, crystallized in standard porcelain oven where it undergoes a dramatic change and the final physical properties are established Restorations made from HT blocks convince users with their true-to-nature chameleon effect and the exceptional adaptation to the remaining tooth structure Highly aesthetic while offering 360 MPa of strength A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg A4 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg B4 I12 5/Pkg C1 I12 5/Pkg C2 I12 5/Pkg C3 I12 5/Pkg C4 I12 5/Pkg D2 I12 5/Pkg D3 I12 5/Pkg D4 I12 5/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg A4 C14 5/Pkg B1 C14 5/Pkg B2 C14 5/Pkg B3 C14 5/Pkg B4 C14 5/Pkg C1 C14 5/Pkg C2 C14 5/Pkg C3 C14 5/Pkg C4 C14 5/Pkg D2 C14 5/Pkg D3 C14 5/Pkg D4 C14 5/Pkg BL1 I12 5/Pkg BL2 I12 5/Pkg BL3 I12 5/Pkg BL4 I12 5/Pkg BL1 C14 5/Pkg BL2 C14 5/Pkg BL3 C14 5/Pkg BL4 C14 5/Pkg pattersondental.ca 7

8 Blocks Milling (cont.) IPS Empress CAD Ivoclar Aesthetic leucite-reinforced glass ceramic blocks commonly used for efficient fabrication of CAD/CAM dental restorations for individual teeth including veneers, inlays, onlays and crowns Outstanding homogeneity leucite crystal distribution and strength of 160 MPa in optimized industrial manufacturing process High Translucency (HT) Ideally suited for fabrication of smaller restorations (e.g., inlays and onlays) Restorations fabricated with HT blocks demonstrate true-to-nature chameleon effect and outstanding adaptation to residual tooth structure Blocks simulate lifelike fluorescence in order to permit optimum integration into natural residual tooth structure Low Translucency (LT) Ideal for most full coverage restorations (e.g., full crowns, large partial coverage restorations and veneers) Less translucent; makes them appear higher in value, resulting in brighter restoration Multi Multiple translucencies and balanced blend of chroma, from gingival to incisal Offers fusion of colour that provides natural gradients to replicate dentin and enamel in a single block Leucite-Reinforced Glass-Ceramic Block for CAD/CAM Dentistry (High Translucency) 100 V12 5/Pkg I8 5/Pkg I8 5/Pkg I8 5/Pkg I10 5/Pkg I10 5/Pkg I10 5/Pkg I12 5/Pkg I12 5/Pkg I12 5/Pkg A1 V12 5/Pkg A2 V12 5/Pkg A3 V12 5/Pkg A1 I8 5/Pkg A2 I8 5/Pkg A3 I8 5/Pkg A3.5 I8 5/Pkg B1 I8 5/Pkg B2 I8 5/Pkg B3 I8 5/Pkg C2 I8 5/Pkg D3 I8 5/Pkg A1 I10 5/Pkg A2 I10 5/Pkg A3 I10 5/Pkg A3.5 I10 5/Pkg B1 I10 5/Pkg B2 I10 5/Pkg B3 I10 5/Pkg C2 I10 5/Pkg D3 I10 5/Pkg A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg C2 I12 5/Pkg D3 I12 5/Pkg Leucite-Reinforced Glass-Ceramic Block for CAD/CAM Dentistry (Low Translucency) 100 V12 5/Pkg I10 5/Pkg I10 5/Pkg I10 5/Pkg I12 5/Pkg I12 5/Pkg I12 5/Pkg C14 5/Pkg C14 5/Pkg C14 5/Pkg A1 V12 5/Pkg A2 V12 5/Pkg A3 V12 5/Pkg A1 I10 5/Pkg A2 I10 5/Pkg A3 I10 5/Pkg A3.5 I10 5/Pkg B1 I10 5/Pkg B2 I10 5/Pkg B3 I10 5/Pkg C2 I10 5/Pkg D3 I10 5/Pkg BL1 I10 5/Pkg BL2 I10 5/Pkg BL3 I10 5/Pkg BL4 I10 5/Pkg A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg C2 I12 5/Pkg D3 I12 5/Pkg BL1 I12 5/Pkg BL2 I12 5/Pkg BL3 I12 5/Pkg BL4 I12 5/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg B1 C14 5/Pkg B2 C14 5/Pkg B3 C14 5/Pkg C2 C14 5/Pkg D3 C14 5/Pkg BL1 C14 5/Pkg Bl2 C14 5/Pkg BL3 C14 5/Pkg BL4 C14 5/Pkg Leucite-Reinforced Glass-Ceramic Block for CAD/CAM Dentistry (Multi) A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg B1 I12 5/Pkg BL1 I12 5/Pkg BL3 I12 5/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg B1 C14 5/Pkg BL1 C14 5/Pkg BL3 C14 5/Pkg A1 C14L 5/Pkg A2 C14L 5/Pkg A3 C14L 5/Pkg A3.5 C14L 5/Pkg B1 C14L 5/Pkg BL1 C14L 5/Pkg BL3 C14L 5/Pkg IPS e.max Press/CAD Shade Guide Ivoclar Shade tabs show the range of ingots available in IPS e.max Press low translucency and high translucency blocks. Low Translucency Each High Translucency Each For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

9 Brilliant results in less time 3M ESPE Lava Ultimate Restorative is a CAD/CAM material that s amazing in every way... aesthetics, long-lasting polish and impressive durability. Saves time - no firing required Less wear to opposing enamel than glass ceramics Reduces stress on tooth structure - absorbs chewing forces Easy to adjust and work on - just like real tooth structure Ideal for all single-unit indications; especially impressive for implant-supported crowns Easy to mill with your CEREC system Available in 8 shades and 2 translucencies ar 10-Year 10-Ye Y HT = High Translucency Shade Selection LT = Low Translucency HT LT A1 A2 A3 A3.5 B1 C2 D2 Bleach Lava Ultimate Restorative. Simply Brilliant! ~ Lava Ultimate URes storative Limited Warranty rranty W Wa t 1 1 See Instructions for Use or our website for full warranty details. 3M, ESPE and Lava are trademarks of 3M or 3M Deutschland GmbH. Used under license in Canada. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 2014, 3M. All rights reserved E

10 Blocks Telio CAD for CEREC Ivoclar Acrylic polymer blocks for the chairside milling of temporary restorations. Is ideal for crowns, bridges and implant restorations that remain in the oral cavity for up to 12 months. Available in LT blocks in sizes B40L and B55, shades: BL3, A1, A2, A3, A3.5 and B1. Exceptional physical properties Lifelike aesthetics Versatile manufacturing options CEREC MC X can mill size B40L; CEREC MC XL, MC XL Practice Lab and inlab MC XL can mill all available sizes BL3 B40L 3/Pkg A1 B40L 3/Pkg A2 B40L 3/Pkg A3 B40L 3/Pkg A3.5 B40L 3/Pkg B1 B40L 3/Pkg BL3 B40L 9/Pkg A1 B40L 9/Pkg A2 B40L 9/Pkg A3 B40L 9/Pkg A3.5 B40L 9/Pkg B1 B40L 9/Pkg BL3 B55 Each A1 B55 Each A2 B55 Each A3 B55 Each A3.5 B55 Each B1 B55 Each BL3 B55 3/Pkg A1 B55 3/Pkg A2 B55 3/Pkg A3 B55 3/Pkg A3.5 B55 3/Pkg B1 B55 3/Pkg Lava Ultimate CAD/CAM Restorative 3M ESPE Highly cured, durable resin nanoceramic blocks used for chairside CAD/CAM dental restorations, including inlays, onlays, veneers and crowns Nanoceramic has elastic modulus comparable to dentin; much lower than brittle glass ceramic materials or PFM veneering porcelains Better absorbs chewing forces and reduces stress on the restoration; advantageous choice for crowns over implants High flexural strength (200 MPa) adds durability to posterior restoration; excellent wear resistance Brilliant and long-lasting polish for outstanding aesthetics Excellent stain resistance for colour stability Fast and easy processing no sintering required Introductory Kit Contains 5 (size 14L) blocks shades: A1-LT, A2-HT, A2-LT, A3-HT, A3-LT and 5 (size 12) blocks shades: A1-LT, A2-HT, A2-LT, A3-HT, A3-LT Kit Starter Kit Contains CAD LT blocks in sizes B40L and B55, shades: BL3, A1, A2, A3, A3.5 and B1 Kit Size 12 Refills, Low Translucency Shade Qty Item # A1 5/Pkg A2 5/Pkg A3 5/Pkg A3.5 5/Pkg B1 5/Pkg C2 5/Pkg D2 5/Pkg Bleach BL 5/Pkg Size 12 Refills, High Translucency Shade Qty Item # A1 5/Pkg A2 5/Pkg A3 5/Pkg B1 5/Pkg Size 14L Refills, Low Translucency Shade Qty Item # A1 5/Pkg A2 5/Pkg A3 5/Pkg A3.5 5/Pkg B1 5/Pkg C2 5/Pkg D2 5/Pkg Bleach BL 5/Pkg Size 14L Refills, High Translucency Shade Qty Item # A1 5/Pkg A2 5/Pkg A3 5/Pkg B1 5/Pkg For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

11 Blocks/Accessories Milling (cont.) Implantology Celtra duo dentsply Zirconia Reinforced Lithium Disilicate The new DNA of hifghstrength glass ceremics Increased glass content visibly improves translucency and facilitates in-depth opalescence and fluorescence. 10% dissolved zirconia reinforces the glass matrix without clouding it, and yields very high flexural strength properties. The ultra fine microstructure of the glass ceramic crystals (<1 μm) allows for easy, fast processing of the ZLS2 material, which can be milled and finished in its final, crystallized, tooth-coloured state (210MPa). ZLS2 flexural strength (370 MPa) exceeds that of Lithium Disilicate (360 MPa) and is achieved in significantly less time! Post-mill, the pre-crystallized, correctly shaded, CELTRA Duo block undergoes a short glaze firing cycle. Starter Kit Contains 19 Celtra Duo Blocks, 1 (3g) Glaze, 1 Brush, 1 Firing Pad and 1 set of Fixing Pins Kit HT A! C14 4/Pkg HT A2 C14 4/Pkg HT A3 C14 4/Pkg LT A1 C14 4/Pkg LT A2 C14 4/Pkg LT A3 C14 4/Pkg LT A3.5 C14 4/Pkg LT B2 C14 4/Pkg Cerasmart Gc CERASMART is a revolutionary block. It combines exceptional strength and unparalleled aesthetics. Best of all, it virtually will not chip, has a faster milling time, and is the easiest material to finish. First in class for intra-oral properties Flexible, tough and fracture résistant Retains gloss over time and is self polishing Natural opalescence Physical properties of natural enamel Easy to polish High radiopacity Highly wear résistant First in class for fabrication properties Repairable in the mouth Very gentle on milling burs No need for crystallization firing Mills quicker Virtually no chipping A1 HT 12 5/Pkg A2 HT 12 5/Pkg A3 HT 12 5/Pkg A3.5 HT 12 5/Pkg B1 HT 12 5/Pkg A1 LT 12 5/Pkg A2 LT 12 5/Pkg A3 LT 12 5/Pkg A3.5 LT 12 5/Pkg B1 LT I12 5/Pkg Bleach I12 5/Pkg A1 HT C14 5/Pkg A2 HT C14 5/Pkg A3 HT C14 5/Pkg A3.5 HT C14 5/Pkg B1 HT C14 5/Pkg A1 LT C14 5/Pkg A2 LT C14 5/Pkg A3 LT C14 5/Pkg A3.5 LT C14 5/Pkg B1 LT C14 5/Pkg Bleach C14 5/Pkg A1 HT C14L 5/Pkg A2 HT C14L 5/Pkg A3 HT C14L 5/Pkg A3.5 HT C14L 5/Pkg B1 HT C14L 5/Pkg A1 LT C14L 5/Pkg A2 LT C14L 5/Pkg A3 LT C14L 5/Pkg A3.5 LT C14L 5/Pkg B1 LT C14L 5/Pkg Bleach C14L 5/Pkg IPS e.max CAd abutment solutions Ivoclar IPS e.max CAD Abutment Solutions are designed for the fabrication of implant-supported hybrid structures for single teeth using CAD/CAM technology. The hybrid components are individually mlled from lithium disilicate blocks (LS 2 ) and bonded to a titanium base. Precision fit due to CAD/CAM fabrication Excellent and long-lasting aesthetic due to toothcoloured hybrid abutments Hybrid abutment crown (2-in-1) for function, efficiency and easy access to the screw at any time Very good compatibility with the oral soft tissue Strong bond between lithium disilicate (LS2) and TiBase due to Multilink Hybrid Abutment Low Translucency A1 (S) A16 5/Pkg A2 (S) A16 5/Pkg A3 (S) A16 5/Pkg A3.5 (S) A16 5/Pkg B1 (S) A16 5/Pkg B2 (S) A16 5/Pkg C1 (S) A16 5/Pkg C2 (S) A16 5/Pkg D2 (S) A16 5/Pkg A1 (L) A16 5/Pkg A2 (L) A16 5/Pkg A3 (L) A16 5/Pkg A3.5 (L) A16 5/Pkg B1 (L) A16 5/Pkg B2 (L) A16 5/Pkg C1 (L) A16 5/Pkg BC2 (L) A16 5/Pkg D2 (L) A16 5/Pkg BL2 (L) A16 5/Pkg BL2 (L) A16 5/Pkg Medium Opacity 0 (S) A14 5/Pkg (S) A14 5/Pkg (S) A14 5/Pkg (S) A14 5/Pkg (S) A14 5/Pkg (L) A14 5/Pkg (L) A14 5/Pkg (L) A14 5/Pkg (L) A14 5/Pkg (L) A14 5/Pkg pattersondental.ca 11

12 Implantology ScanPost Sirona ScanPost is an impression post which can be used intraorally to digitally capture the position of the implant in relation to the remaining teeth and the soft tissue. The implant-specific scan post is screwed together with the implant only for the purpose of optical detection. The scan post and fixing screw are sterilizable and can be used up to 50 times. ScanPost must not be used for the final implant treatment! TiBase Sets Sirona Among patients and dentists there is growing demand for aesthetically perfect implants Titanium base, abutment screw, scanbody for Custom Abutments TiBase and incoris Z1 meso can be use to make individual highly aesthetic hybrid abutments with a crown of your choice. This means the steps can be adjusted to the contour of the gingiva and grey metal margins are a thing of the past even with gingival recession. TiBase Abutment Scan Item # Replacing screw body ATOS 3.5/4.0 M1.6 L OsseoSpeed 3,5S/4,0S ATOS 4.5/5.0 M2 L OsseoSpeed 4,5/5,0 BC 3.4 M1.6 S Certain 3,4 BC 4.1 M1.6 L Certain 4,1 BC 5.0 M1.6 L Certain 5,0 BO 3.4 M2 L Ex. Hex 3,4 BO 4.1 M2 L Ex. Hex 4,1 BO 5.0 M2 L Ex. Hex 5,0 FX 3.4 M1.6 S Frialit /Xive 3,4 FX 3.8 M1.6 S Frialit /Xive 3,8 FX 4.5 M1.6 L Frialit /Xive 4,5 FX 5.5 M1.6 L Frialit /Xive 5,5 NBA 4.5 M1.8 L Nobel Active NP 3,5 NBA 5.0 M2 L Nobel Active RP 4,3/5,0 NBB 3.4 M1.6 L Brânemark NP 3,3 NBB 4.1 M2 L Brânemark RP 3,75/4,0 NBRS 3.5 M1.8 L Replace NP 3,5 NBRS 4.3 M2 L Replace RP 4,3 NBRS 5.0 M2 L Replace WP 5,0 NBRS 6.0 M2 L Replace 6,0 SBL 3.3 M1.6 L Bone Level 3,3 SBL 4.1 M1.6 L Bone Level 4,1/4,8 SSO 3.5 M1.8 L SynOcta NN 3,5 SSO 4.8 M2 L SynOcta NN 4,8 SSO 6.5 M2 L SynOcta NN 6,5 ZTSV 3.5 M1.8 L Tapered Screw-Vent 3,5 ZTSV 4.5 M1.8 L Tapered Screw-Vent 4.5 ZTSV 5.0 M1.8 L Tapered Screw-Vent 5,7 A suitable scanbody must be mounted on the ScanPost. Scanbodies are separately available for different camera systems in connection sizes S and L. The product scanbodies for Omnicam is suitable only for intraoral application with CEREC Omnicam. The product scanbodies for Bluecam can be used for the CEREC Bluecam, ineos X5 and ineos Blue acquisition systems. Digital capture of the implant position with ScanPost is possible only in connection with one of three software products, i.e. CEREC SW 4.2, CEREC Connect SW 4.2 or inlab SW 4.2 (or higher). TiBase Abutment Scan Item # Replacing screw body ATOS 3.5/4.0 M1.6 L OsseoSpeed 3,5S/4,0S ATOS 4.5/5.0 M2 L OsseoSpeed 4,5/5,0 BC 3.4 M1.6 S Certain 3,4 BC 4.1 M1.6 L Certain 4,1 BC 5.0 M1.6 L Certain 5,0 BO 3.4 M2 L Ex. Hex 3,4 BO 4.1 M2 L Ex. Hex 4,1 BO 5.0 M2 L Ex. Hex 5,0 FX 3.4 M1.6 S Frialit /Xive 3,4 FX 3.8 M1.6 S Frialit /Xive 3,8 FX 4.5 M1.6 L Frialit /Xive 4,5 FX 5.5 M1.6 L Frialit /Xive 5,5 NBA 4.5 M1.8 L Nobel Active NP 3,5 NBA 5.0 M2 L Nobel Active RP 4,3/5,0 NBB 3.4 M1.6 L Brânemark NP 3,3 NBB 4.1 M2 L Brânemark RP 3,75/4,0 NBRS 3.5 M1.8 L Replace NP 3,5 NBRS 4.3 M2 L Replace RP 4,3 NBRS 5.0 M2 L Replace WP 5,0 NBRS 6.0 M2 L Replace 6,0 SBL 3.3 M1.6 L Bone Level 3,3 SBL 4.1 M1.6 L Bone Level 4,1/4,8 SSO 3.5 M1.8 L SynOcta NN 3,5 SSO 4.8 M2 L SynOcta NN 4,8 SSO 6.5 M2 L SynOcta NN 6,5 ZTSV 3.5 M1.8 L Tapered Screw-Vent 3,5 ZTSV 4.5 M1.8 L Tapered Screw-Vent 4.5 ZTSV 5.0 M1.8 L Tapered Screw-Vent 5,7 Cerec Guide Blocks Sirona Using the CEREC Guide, you can create a precise surgical guide in your practice/laboratory. The process is fast and incurs comparatively low costs. The individually manufactured surgical guide is part of the integrated implant plan and surgical implementation using CAD/CAM and 3D X-ray systems from Sirona. The CEREC Guide concept is designed for the manufacture of individual implant surgical guides by specialist dental staff/technicians. The surgical guide is designed as an auxiliary device for dental surgery. No more than 2 implants should be set per template. Prerequisites CEREC or inlab MC XL milling unit GALILEOS or ORTHOPHOS XG 3D CEREC SW or higher CEREC SW license "Open GALILEOS Implant" Implant planning software "GALILEOS Implant", V1.9 with SP1 or higher Clear Small 2/Pkg Clear Medium 2/Pkg Clear Large 2/Pkg For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

13 Implantology CEREC Guide Components CEREC Guide allows you to mill your own surgical guides for implant placement. CEREC Sodftware 4.03 or higher and Galaxis 1.9 or higher are required, as of February Supplies required on the CEREC side: Tak thermal plastic system TAk systems Custom formulated impression material Nontoxic Hypoallergenic Softens in hot water into translucent putty Bite sticks provide border molding and muscle trimming material Hydroplastic Border Mold Sticks Standard, 9/Pkg Economy, 20/Pkg Cerec Guide Blocks Sirona Using the CEREC Guide, you can create a precise surgical guide in your practice/laboratory. The process is fast and incurs comparatively low costs. The individually manufactured surgical guide is part of the integrated implant plan and surgical implementation using CAD/CAM and 3D X-ray systems from Sirona. The CEREC Guide concept is designed for the manufacture of individual implant surgical guides by specialist dental staff/technicians. The surgical guide is designed as an auxiliary device for dental surgery. No more than 2 implants should be set per template. Prerequisites CEREC or inlab MC XL milling unit GALILEOS or ORTHOPHOS XG 3D CEREC SW or higher CEREC SW license "Open GALILEOS Implant" Implant planning software "GALILEOS Implant", V1.9 with SP1 or higher Clear Small 2/Pkg Clear Medium 2/Pkg Clear Large 2/Pkg cerec mc xl milling burs, size 20 sirona Machine parts, known as burs, that do the actual milling of the composite blocks. Cylinder Pointed Bur, 20mm 6/Package Step Bur, 20 mm 6/Package Guide Drill Key Set Sirona Some drill keys are labeled with supported manufacturers, for example, ST for Straumann. The Straumann key set only comprises drill keys that can be used with Straumann drills. Universal drill keys are not labeled with a manufacturer. These keys can be included in several key sets. You can use them in conjunction with the labeled keys in the key set. S, M, or L depending on the reference unit being used as it determines the size of the drill channel in the block. Each drill key transfers a S, M, or L drill channel to the exact width of the drill being used. The diameter in mm of the drill that must be used. Straumann Guided Surgery Kit Each Nobel Biocare Each AstraTech: Facilitate Each Biomet 3i: Navigator Each Camlog Guided Surgery Kit Each pattersondental.ca 13

14 Blocks NOTE 14 For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

15 inlab Coping and Frameworks Milling In-Ceram AL Vident Partially sintered alumina blocks suitable for toothcoloured primary components, crowns and anterior bridge substructures with up to 3 units. Veneer with VITA VM7. Mandrel fits both compact and MC XL milling units. Type B. Material Size Qty Item # Alumina AL - 20/19 4/Pkg Alumina AL - 20/19 24/Pkg Alumina AL - 40/19 2/Pkg Alumina AL - 40/19 10/Pkg In-Ceram Classic Alumina for inlab Vident Provides the perfect combination of aesthetics and strength. Indicated for crowns and anterior bridge substructures with up to 3 pontics. Mandrel fits both compact and MC XL milling units. Tpe B. Material Size Qty Item # Alumina BA-28 2/Pkg Alumina CA-12 10/Pkg Alumina CA-40 2/Pkg In-Ceram Classic Spinell for inlab Vident Features the highest translucency of all oxide ceramics for excellent aesthetics. Indicated for anterior, single unit crown copings. Mandrel fits both compact and MC XL milling units. Type A. Material Size Qty Item # Spinell CS-11 10/Pkg In-Ceram Classic Zirconia for inlab Vident Features the highest masking power for discoloured preparations. Indicated for crown and bridge substructures with up to 3 units in the anterior and posterior area. Mandrel fits both compact and MC XL milling units. Tye B. Material Size Qty Item # Zirconia BZ-33 2/Pkg Zirconia BZ-40 2/Pkg Zirconia CZ-12 10/Pkg Zirconia CZ-18 5/Pkg In-Ceram YZ for inlab Vident Sintering ceramic indicated for crown copings and multiunit bridge substances in the anterior and posterior area. This yttrium-stabilized zirconium dioxide is the diamond among dental ceramics for the construction of high strength, attractive crown and bridge substructures (invizion restorations). Unsurpassed strength for highly stable, thin substructures. Mandrel fits both compact and MC XL milling units. Type B. Material Size Qty Item # Zirconia YZ-14/13 20/Pkg Zirconia YZ-20/15 5/Pkg Zirconia YZ-20/15 20/Pkg Zirconia YZ-20/19 4/Pkg Zirconia YZ-40/15 2/Pkg Zirconia YZ-40/15 10/Pkg Zirconia YZ-40/19 2/Pkg Zirconia YZ-40/19 10/Pkg Zirconia YZ-55/20 4/Pkg Zirconia YZ-65/25 Each Zirconia YZ-65/25 3/Pkg Zirconia YZ-65/40 Each Zirconia YZ-85/40 Each InCoris AL Sirona Blocks consist of partially sintered aluminum oxide. They are the cost-effective option for creating crown copings and 3-unit anterior bridge frameworks (with a maximum of 1 pontic). Blocks can be finished using conventional veneering materials (i.e., VITA VM7). Anterior and posterior crown copings Anterior bridge frameworks with 1 pontic Primary parts for cone telescope crowns F0.7 20/19 6/Pkg F0.7 20/19 24/Pkg F0.7 40/15 12/Pkg F0.7 40/19 3/Pkg F0.7 40/19 12/Pkg incoris TZI for inlab System Sirona For the production of anatomically sized, non-veneered zirconium oxide restorations Highly translucent zirconium oxide for full crowns and bridges with up to 5 units Ideal for critical situations, e.g., where there is limited space between the restoration and the antagonist Resistant to chipping Machinable in the inlab MC XL and CEREC MC XL milling units (bur combination: Step Bur 20 and Pointed Bur 20 for zirconium oxide) Complete restorations within a single working day in combination with the infire HTC speed furnace Software requirement: inlab 3D V3.86 or higher Translucent, Zirconia Blocks Size Qty Item # 20/19 3/Pkg /19 3/Pkg /19 2/Pkg Colouring Liquid Starter Kit Contains 16 (150ml) bottles of incoris TZI Colouring Liquid, 16 dipping containers (empty cans) and 1 pair of tweezers Each Colouring Liquid Size ShadeQty Item # 150 ml A1 Each ml A2 Each ml A3 Each ml A3.5 Each ml A4 Each ml B1 Each ml B2 Each ml B3 Each ml B4 Each ml C1 Each ml C2 Each ml C3 Each ml C4 Each ml D2 Each ml D3 Each ml D4 Each Dipping Bowls 5/Package Plastic Tweezers 5/Package pattersondental.ca 15

16 inlab incoris ZI Ceramic Blocks for inlab Sirona Ideal for the fabrication of crown copings, as well as multiple-unit anterior and posterior bridges (with a maximum of 2 pontics). Material is preshaded to obviate the need to shade the milled framework using a liner of staining solution. Blocks can be finished using conventional veneering materials (i.e., VITA VM9). High strength Resistance to corrosion Good biological compatibility of the product Light colour and the colouring of the blocks in 5 tooth colours Translucency with thin wall thickness Size Shade Qty Item # 20/19 F0.5 3/Pkg /19 F1 3/Pkg /19 F2 3/Pkg /19 F3 3/Pkg S40/15 F0.5 3/Pkg S40/15 F1 3/Pkg S40/15 F2 3/Pkg S40/15 F3 3/Pkg /15 F2 12/Pkg /15 F3 12/Pkg /15 F4.5 12/Pkg /19 F0.5 3/Pkg /19 F1 3/Pkg /19 F2 3/Pkg /19 F3 3/Pkg /19 F4.5 12/Pkg /19 F0.5 2/ Pkg /19 F0.5 Each (Nonflip) 55/19 F1 Each (Nonflip) 55/19 F3 Each (Nonflip) 55/19 F2 Each (Nonflip) 65/25 F0.5 Each /25 F1 Each /25 F2 Each /25 F3 Each /25 F4 Each incoris ZI meso Sirona High-performance ceramic material High translucency Outstanding fracture strength and longevity Excellent biocompatibility Available in 4 different shades Shade Qty Item # F0.5 Each F2 Each F0.5 Each F2 Each VITA CAD-Waxx Vident High molecular translucent acrylpolymer for the construction of PFM metal framework for crowns and bridges. Burns away cleanly using the lost-wax technique. Mandrel fits both compact and MC XL milling units. Type B. Material Size Qty Item # Acrylic 40/15 2/Pkg Acrylic 40/15 10/Pkg CEREC Full Contour Block Refills Sirona Fine-structure feldspar ceramic blocks Easy to polish; similar to natural tooth enamel in terms of abrasion properties Available in translucent (T), medium (M) and opaque (O) All refills can be used in combination with VITA Classical A-D Shade system as well as VITA 3D-Master Shade system Size Shade Qty Item # 8 S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg S0-M 8/Pkg S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg S0-M 8/Pkg S1-M 8/Pkg S2-T 8/Pkg S2-M 8/Pkg S2-O 8/Pkg S3-T 8/Pkg S3-M 8/Pkg S3-O 8/Pkg S4-T 8/Pkg S4-M 8/Pkg S4-O 8/Pkg S5-M 8/Pkg For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

17 INTRODUCING Data on file. Not a registered trademark of GC America Inc. Flexural Strength (MPa) THREE-POINT BENDING TEST (ISO 6872) Flexural Strength 306 Breaking Energy CERASMART VITA Mark2 CERASMART showed second higher strength but the best breaking energy. That means CERASMART was a virtually fracture-proof material. Restorations courtesy of Dr. Rich Rosenblatt. Breaking Energy (N cm) Only CERASMART consists of a flexible nano ceramic matrix with an even distribution of nano ceramic. This specially designed nano ceramic matrix makes it an ideal high strength and force absorbing restoration for all indications especially implant supported crowns. FIRST IN CLASS FOR FABRICATION PROPERTIES Repairable in the mouth Very gentle on milling burs Mills quicker Virtually no chipping No need for sintering/ crystallization firing FIRST IN CLASS FOR INTRA-ORAL PROPERTIES Flexible, tough and fracture resistant Retains gloss over time and is self polishing Natural opalescence Physical properties of natural enamel Easy to polish High radio opacity Highly wear resistant The First Force Absorbing Flexible Nano Ceramic GC America Inc., 2015.

18 inlab Milling (cont.) IPS Empress CAD Ivoclar Vivadent Aesthetic leucite-reinforced glass ceramic blocks commonly used for efficient fabrication of CAD/CAM dental restorations for individual teeth including veneers, inlays, onlays and crowns Outstanding homogeneity leucite crystal distribution and strength of 160 MPa in optimized industrial manufacturing process High Translucency Ideally suited for fabrication of smaller restorations (e.g., inlays and onlays) Restorations fabricated with HT blocks demonstrate true-to-nature chameleon effect and outstanding adaptation to residual tooth structure Blocks simulate lifelike fluorescence in order to permit optimum integration into natural residual tooth structure 100 V12 5/Pkg I8 5/Pkg I8 5/Pkg I8 5/Pkg I10 5/Pkg I10 5/Pkg I10 5/Pkg I12 5/Pkg I12 5/Pkg I12 5/Pkg A1 V12 5/P g A2 V12 5/Pkg A3 V12 5/Pkg A1 I8 5/Pkg A2 I8 5/Pkg A3 I8 5/Pkg A3.5 I8 5/Pkg B1 I8 5/Pkg B2 I8 5/Pkg B3 I8 5/Pkg C2 I8 5/Pkg D3 I8 5/Pkg A1 I10 5/Pkg A2 I10 5/Pkg A3 I10 5/Pkg A3.5 I10 5/Pkg B1 I10 5/Pkg B2 I10 5/Pkg B3 I10 5/Pkg C2 I10 5/Pkg D3 I10 5/Pkg A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg C2 I12 5/Pkg D3 I12 5/Pkg Low Translucency Ideal for most full coverage restorations (e.g., full crowns, large partial coverage restorations and veneers) Less translucent; makes them appear higher in value, resulting in brighter restoration 100 V12 5/Pkg I10 5/Pkg I10 5/Pkg I10 5/Pkg I12 5/Pkg I12 5/Pkg I12 5/Pkg C14 5/Pkg C14 5/Pkg C14 5/Pkg A1 V12 5/Pkg A2 V12 5/Pkg A3 V12 5/Pkg A1 I10 5/Pkg A2 I10 5/Pkg A3 I10 5/Pkg A3.5 I10 5/Pkg B1 I10 5/Pkg B2 I10 5/Pkg B3 I10 5/Pkg C2 I10 5/Pkg D3 I10 5/Pkg Bleach 1 I10 5/Pkg Bleach 2 I10 5/Pkg Bleach 3 I10 5/Pkg Bleach 4 I10 5/Pkg A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg C2 I12 5/Pkg D3 I12 5/Pkg Bleach 1 I12 5/Pkg Bleach 2 I12 5/Pkg Bleach 3 I12 5/Pkg Bleach 4 I12 5/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg B1 C14 5/Pkg B2 C14 5/Pkg B3 C14 5/Pkg C2 C14 5/Pkg D3 C14 5/Pkg Bleach 1 C14 5/Pkg Bleach 2 C14 5/Pkg Bleach 3 C14 5/Pkg Bleach 4 C14 5/Pkg Multi Multiple translucencies and balanced blend of chroma, from gingival to incisal Offers fusion of colour that provides natural gradients to replicate dentin and enamel in a single block A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg B1 I12 5/Pkg Bleach 1 I12 5/Pkg Bleach 3 I12 5/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg B1 C14 5/Pkg Bleach 1 C14 5/Pkg Bleach 3 C14 5/Pkg A1 C14L 5/Pkg A2 C14L 5/Pkg A3 C14L 5/Pkg A3.5 C14L 5/Pkg B1 C14L 5/Pkg Bleach 1 C14L 5/Pkg Bleach 3 C14L 5/Pkg IPS e.max CAD Crystall Ivoclar Shades are dentin stains in paste form Stains are intensive stains in paste form designed for reproduction of natural characteristics Optimally coordinated for use with IPS e.max CAD Stain Refill, 1g Syringe Copper Cream Khaki Mahogany Olive Sunset White Paste 3g Syringe Spray 270ml Spray Bottle Crystallization Tray Each Crystallization Pins 18/Package Shade Refill, 3g Syringe For more information or to place an order, call , contact your Patterson representative or visit pattersondental.ca

19 inlab IPS e.max CAD High Translucency Ivoclar Composite glass-ceramic blocks (lithium-disilicate) used for CAD/CAM ceramic tooth restorations including veneers, inlays, partial crowns and crowns Blue, delivered in precrystallized form that is ideal for milling smaller restorations (e.g., inlays, onlays) After milling, crystallized in standard porcelain oven where it undergoes a dramatic change and the final physical properties are established Restorations made from HT blocks convince users with their true-to-nature chameleon effect and the exceptional adaptation to the remaining tooth structure Highly aesthetic while offering 360 MPa of strength A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg A4 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg B4 I12 5/Pkg C1 I12 5/Pkg C2 I12 5/Pkg C3 I12 5/Pkg C4 I12 5/Pkg D2 I12 5/Pkg D3 I12 5/Pkg D4 I12 5/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg A4 C14 5/Pkg B1 C14 5/Pkg B2 C14 5/Pkg B3 C14 5/Pkg B4 C14 5/Pkg C1 C14 5/Pkg C2 C14 5/Pkg C3 C14 5/Pkg C4 C14 5/Pkg D2 C14 5/Pkg D3 C14 5/Pkg D4 C14 5/Pkg BL1 I12 5/Pkg BL2 I12 5/Pkg BL3 I12 5/Pkg BL4 I12 5/Pkg BL1 C14 5/Pkg BL2 C14 5/Pkg BL3 C14 5/Pkg BL4 C14 5/Pkg IPS e.max CAD Low Translucency Blocks Ivoclar Requires CEREC chairside SW 4.2 or higher Composite glass-ceramic blocks (lithium-disilicate) used for ceramic tooth restorations including veneers, inlays, partial crowns and crowns Blue colour, delivered in precrystallized form that is ideal for milling; after milling, crystallized in a standard porcelain oven Particularly suitable for the fabrication of partial crowns and single crowns using the cut-back and staining technique Lifelike aesthetic appearance can be maximized with final layering with IPS e.max Ceram Essence and Ceram Shade materials Highly aesthetic while offering 360 MPa of strength A1 A16 (S) 5/Pkg A2 A16 (S) 5/Pkg A3 A16 (S) 5/Pkg A3.5 A16 (S) 5/Pkg B1 A16 (S) 5/Pkg B2 A16 (S) 5/Pkg C1 A16 (S) 5/Pkg C2 A16 (S) 5/Pkg D2 A16 (S) 5/Pkg A1 A16 (L) 5/Pkg A2 A16 (L) 5/Pkg A3 A16 (L) 5/Pkg A3.5 A16 (L) 5/Pkg B1 A16 (L) 5/Pkg B2 A16 (L) 5/Pkg C1 A16 (L) 5/Pkg C2 A16 (L) 5/Pkg D2 A16 (L) 5/Pkg BL2 A16 (S) 5/Pkg BL2 A16 (L) 5/Pkg IPS e.max CAD Medium Opacity Blocks Ivoclar Lithium disilicate glass-ceramic block for the CAD/CAM technique. IPS e.max CAD blocks feature shading ranging from white and blue to blue-grey, which is a result of the composition of the glassceramic. Can be processed using the inlab or Everest system Efficient, economical processing due to easy grinding properties High final strength of 360 MPa Easy and fast crystallization (850 C, 30 minutes) Crystallization without shrinkage and complex infiltration processes Lifelike and translucent aesthetics A1 B32 3/Pkg A2 B32 3/Pkg A3 B32 3/Pkg A3.5 B32 3/Pkg B1 B32 3/Pkg B2 B32 3/Pkg C1 B32 3/Pkg C2 B32 3/Pkg D2 B32 3/Pkg BL2 B32 3/Pkg A1 C14 5/Pkg A2 C14 5/Pkg A3 C14 5/Pkg A3.5 C14 5/Pkg A4 C14 5/Pkg B1 C14 5/Pkg B2 C14 5/Pkg B3 C14 5/Pkg B4 C14 5/Pkg C1 C14 5/Pkg C2 C14 5/Pkg C3 C14 5/Pkg C4 C14 5/Pkg D2 C14 5/Pkg D3 C14 5/Pkg D4 C14 5/Pkg BL1 C14 5/Pkg BL2 C14 5/Pkg BL3 C14 5/Pkg BL4 C14 5/Pkg A1 C16 5/Pkg A2 C16 5/Pkg A3 C16 5/Pkg A3.5 C16 5/Pkg B1 C16 5/Pkg B2 C16 5/Pkg C1 C16 5/Pkg C2 C16 5/Pkg D2 C16 5/Pkg BL2 C16 5/Pkg A1 I12 5/Pkg A2 I12 5/Pkg A3 I12 5/Pkg A3.5 I12 5/Pkg A4 I12 5/Pkg B1 I12 5/Pkg B2 I12 5/Pkg B3 I12 5/Pkg B4 I12 5/Pkg C1 I12 5/Pkg C2 I12 5/Pkg C3 I12 5/Pkg C4 I12 5/Pkg D2 I12 5/Pkg D3 I12 5/Pkg D4 I12 5/Pkg BL1 I12 5/Pkg BL2 I12 5/Pkg BL3 I12 5/Pkg BL4 I12 5/Pkg A14 (S) 5/Pkg A14 (S) 5/Pkg A14 (S) 5/Pkg A14 (S) 5/Pkg A14 (S) 5/Pkg A14 (L) 5/Pkg A14 (L) 5/Pkg A14 (L) 5/Pkg A14 (L) 5/Pkg A14 (L) 5/Pkg C14 5/Pkg C14 5/Pkg C14 5/Pkg C14 5/Pkg C14 5/Pkg pattersondental.ca 19