MULTI USE WORKOUT BENCH Assembling &User Manual

Size: px

Start display at page:

Download "MULTI USE WORKOUT BENCH Assembling &User Manual"

Coleen Patrick
5 years ago
Views:

1 NOTE: Please ensure that you read this instruction carefully before attempting to assemble or use this product MULTI USE WORKOUT BENCH Assembling &User Manual Model :JX-503B Cat No.# Model : JX-503B Retain This Manual for Reference OWNER'S MANUAL Retailer: ARGOS ADDRESS: Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks, MK9 2NW

2 TABLE OF CONTENTS TABLE OF CONTENTS...1 IMPORTANT SAFETY NOTICES...2 GENERAL INFORMATION...3 EXERCISE INFORMATION...4 WORKOUT CHART...6 ASSEMBLING INSTRUCTION...7 1

3 PRECAUTIONS IMPORTANT SAFETY NOTICE This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person at a time should use the machine. 3. If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY 4. Position the machine on a clear, leveled surface. DO NOT use the machine near water or outdoors. 5. Keep hands away from all moving parts. 6. Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the machine. Running or aerobic shoes are also required when using the machine. 7. Use the machine only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer. 8. Do not place any sharp object around the machine. 9. Disabled person should not use the machine without a qualified person or physician in attendance. 10. Before using the machine to exercise, always do stretching exercises to properly warm up. 11. Never operate the machine if the machine is not functioning properly. 12. Examine the equipment frequently especially for the easy damaged parts. Safety level of the equipment can only remain if it is examined regularly. Replace the defective comments components immediately; keep the equipment out of use until repair. 13. Parents and others in charge of children should be aware of their responsibility because the natural play instinct and the fondness of experimenting of children can lead to situations and behavior for which the training equipment is not intended. 14. A spotter is recommended during exercise. 15. This product is suitable for user s weight: 110kgs /242lbs. 16. Your product is intended for use in clean dry conditions, your should avoid storage in excessively cold or damp places as this may lead to corrosion and other related problem that are outside our control. 17. This product conforms to: (BS EN957)-PARTS 1. 2 class (H) - Home Use- Class (C). It s NOT suitable for therapeutic purposes. WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. ARGOS ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. 2

4 GENERAL INFORMATION QUALITY: This exercise product has been designed and manufactured to comply with the latest (BS EN 957) British and European Safety Standards. CARE AND MAINTENANCE: 1. Examine the machine periodically in order to detect any damage or wear which may have been produced. 2. Lubricate moving parts with light oil periodically to prevent premature wear. 3. Inspect and tighten all parts before using the machine, replace any defective parts immediately, and do not use the machine again until it is in perfect working order 4. The machine can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. QUESTIONS: Should you encounter any difficulty with assembly, operation or use of your exercise product or if you think that you may have parts missing, please contact with your retailer as below: Retailer: ARGOS ADDRESS: Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks, MK9 2NW GUARANTEE: FOR GUARANTEE PURPOSES, PLEASE RETAIN YOUR PURCHASE RECEIPT. 3

5 EXERCISE INFORMATION IMPORTANT Before beginning any exercise programme, you should first consult your doctor. This is particularly advisable for persons over the age of 35 and those with heart problem. WARM UP MUSCLE Warm-up is necessary for the following reasons: Your safety: a physical activity that increase intensity gradually is essential for not causing damage to the heart, arteries, muscles and joints (neck, fingers, ankles, etc) Getting into the activity gradually: the physical ritual of warm-up helps you focus psychologically on the day s new activity. Being more effective: a body s overall performance is much greater after gradually warming-up. A better recovery: with better preparation, the body adepts better and is less fatigued with the same effort. Greater satisfaction: the first four minutes of the activity are often unpleasant. This is because they correspond to the body s initial adaptation to the effort, it is better to respect a specific time and technique for preparation. INTENSITY OF THE EXERCISE Depending on what you are going to work, each exercise has its own intensity and time. The table on the left shows the level of intensity in comparison with the desired working level Taking your pulse (if no pulse monitor) You can take your pulse by placing two fingers on your wrist or on each side of your neck, as shown in the diagram. Count the number of pulses during 6 seconds and multiply the result by 10. 4

6 WARM UP AND COOL DOWN 5

7 WORKOUT CHART WARNING! PLEASE READ BEFORE EXERCISE Always warm up your body muscle before exercising, easy stretching (without bouncing) and light calisthenics, for several minutes, are recommended to prepare your body. Exercise the complete body every other day, up to three times a week. The one day rest enables the body recover from the previous workout. WORKOUT CHART Biceps Curl Develop the biceps muscles. Sit on the bench with you back supported on the bench Grasp a dumbbell in each hand with the palms facing forwards. Raise the dumbbells until the biceps are fully contracted. Return slowly to the start position and repeat, Beginners: 10 Reps with light weights Intermediate: 10 reps/3 sets Advance: 10Reps/ 4 sets with gradually increasing weights Chest Press Develop the upper pectoral muscles of the chest. With the elbows slightly bent. Hold two dumbbells at arms length overhead, Lower the dumbbells slowly out to the sides of the chest to a point where you can feel the stretch of the pectoral muscles, Bring the dumbbells back o the start position again in the same arc and repeat. Beginners: 10 Reps with light weights Intermediate: 10 reps/3 sets Advance: 10Reps/ 4 sets with gradually increasing weights Rows Develops the Triceps muscle. Stand along side the bench with your right knee bent in front of your left leg, and the dumbbell in your left hand, hold the bench side with your right hand for support. Bend over and drop your left hand towards the floor Now, Pull the dumbbell up until it is tucked into your side. Return to starting position and repeat with your opposite side. Beginners: 10 Reps with light weights Intermediate: 10 reps/3 sets Advance: 10Reps/ 4 sets with gradually increasing weights Sit-Up Develops the Abdominal muscles. Sit on the bench with your knees bent to about 45 degrees and your feet hooked under the Leg Bar Foam Rollers, Put your hand on your shoulders and your chin on your chest (This will put a slight bow in your back) For this position, inhale and lie back until your lower back touches the Backrest Board, Exhale as you raise back up to the starting position Beginners: 10 Reps with light weights Intermediate: 10 reps/3 sets Advance: 10Reps/ 4 sets with gradually increasing weights 6

8 ASSEMBLING INSTRUCTION HARDWARE PACK 7

9 ACCESSORY PART LIST 8

10 EXPLODED DIAGRAM 9

11 PART LIST 1 Front Stabilizer *60MM End Cap 2 2 Rear Stabilizer 1 18 Φ25MM End Cap 2 3 Backrest Support 1 19 Foam Roll 2 4 Leg Holder MM End Cap 2 5 Left Seat Support 1 21 M10X82MM Hex Bolt 2 6 Right Seat Support 1 22 M10X65MM Hex Bolt 2 7 Foam Roll Tube 1 23 M10X70MM Hex Bolt 1 8 Dumbbell Holder 1 24 M10X160MM Hex Bolt 1 9 Seat Pad 1 25 M8*42MM Hex Bolt 4 10 Backrest Pad 1 26 M8X16MM Hex Bolt 4 11 Lock Pin M6X16MM Philips Bolt 1 12 Lock Pin M10 Aircraft Nut 6 13 Long Lock Pin 1 29 Φ10MM Washer Φ50mm End Cap 4 30 Φ8MM Washer *50MM End Cap 2 31 Bumper MM End Cap 4 10

12 ASSEMBLING INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches, and one Philips Screw driver. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. Carefully unpack each component, checking against the part list that you have all the necessary parts to complete the assembly of your product PLEASE NOTE that some of the parts may be pre-fitted to major components. So please check carefully before contacting Argos in any event. Step 1 (See Below Diagram 1) A. Attach the Front Stabilizer(#1) and Rear Stabilizer(#2) to the Backrest Support(#3), Align the hole and secure each of them with one M10*82MM Hex Bolt(#21),two Φ10mm Washers (#29) and one M10 Aircraft Nut(#28). B. Select Desired incline and lock the Front Stabilizer (#1) and Rear Stabilizer (#2) to the Backrest Support (#3), to the Backrest Support (#3) with two 95MM Lock Pins (#11). Assembly Accessories 1 Part No Description QTY Diagram MM Lock Pin 2 21 M10*82MM Hex Bolt 1 28 M10 Aircraft Nut 1 29 Φ10MM Washer 2 11

13 Step 2 (See Diagram 2) A. Attach Dumbbell Holder(#8) to the Rear Stabilizer(#2), Align the hole and secure with two M10*65MM Hex Bolts(#22), four Φ10MM Washers(#29) and two M10 Aircraft Nuts(#28). B. Attach the Left &Right Seat Pad Supports(#6&#5) to each side of the Backrest Support(#2), Align the top hole and secure with one M10*160MM Hex Bolt(#24), two Φ10MM Washers(#29) and one M10 Aircraft Nut(#28). C. The Seat Pad Support Assembling have two position incline adjustments, Select your desired angle and secure with one 175MM Lock Pin(#13) Assembly Accessories 2 Part No Description QTY MM Lock Pin 1 22 M10*65MM Hex Bolt 2 24 M10*160NN Hex Bolt 1 28 M10MM Aircraft Nut 3 29 Φ10MM Washer 6 Diagram 2 12

14 STEP 3 (See Diagram 3) A. Attach the Seat Pad (#9) to the two Seat Pad Supports (#5&#6), Align the hole and secure with four M8*42MM Hex Bolts (#25) and four Φ8MM Washers (#30). B. Attach the Backrest Pad (#10) to the Backrest Pad Support(#3), Align the hole and secure with four M8*16MM Hex Bolts (#26) and four Φ8MM Washers (#30). Assembly Accessories 3 Part No Description QTY 25 M8*42MM Hex Bolt 4 26 M8*16MM Hex Bolt 4 30 Φ8MM Washer 8 Diagram 3 13

15 STEP 4 (Diagram 4) Attach the Foot Holder (#4) to the bracket on the Front Stabilizer(#1), Align the hole and secure with one M10*70MM Hex Bolt(#23), two Φ10mm Washers(#29) and one M10 Aircraft Nut(#28). DO NOT OVER TIGHTEN THE BOLT. During dumbbell exercise or storage the Foot Holder Assembling can be folded, when you attend to do sit up exercise, insert one 83MM Lock Pin(#12) into another hole if the Foot Holder (#4) and the bracket on the Front Stabilizer(#1). Slide the Foam Roll Tube (#7) into the hole on the top of the Foot Holder (#4) with half way, attach two Foam Rolls (#19) from each side of the Foam Roll Tube (#7). Assembly Accessories 4 Part No Description QTY 12 83MM Lock Pin 1 23 M10*70MM Hex Bolt 1 28 M10 Aircraft Nut 1 29 Φ10MM Washer 2 Diagram 4 14

16 RETAILER: ARGOS ADDRESS: Avebury Boulevard Saxon Gate West Central Milton Keynes Bucks, MK9 2NW

Utility Training Bench Assembling &User Manual

NOTE: Please ensure that you read this instruction carefully before attempting to assembling or using this product Model :JX-206A Cat No.# 9283457 Utility Training Bench Assembling &User Manual Model :