Investigation. One in a Million

Size: px

Start display at page:

Download "Investigation. One in a Million"

Tracey Perry
5 years ago
Views:

1 Investigation 2C One in a Million

2 Drinking water can contain up to 1.3 parts per million of copper. What does that mean? How is it measured? 1.3 parts per million 1,000,000 parts per million (pure copper) 2 Investigation 2C: One in a Million

3 Part 1: Making solutions 1. Using the 1 ml pipette, add 1 ml of red food coloring to test tube #1. 2. Add 9 ml of water to the test tube. 3. Take 1 ml of solution from test tube #1 and put it in test tube #2. (If you use the same pipette, make sure to clean it well before reusing it.) 4. Add 9 ml of water to the test tube. 5. Take 1 ml of solution from test tube #2 and put it in test tube #3. 6. Add 9 ml of water to test tube #3. 7. Now take 1 ml of solution from test tube #3 and put it in test tube #4. 8. Add 9 ml of water to test tube #4. 3 Investigation 2C: One in a Million

4 Part 2: Doing the math Each test tube contains a solution with a different concentration of red dye. a. Calculate the concentration of the solution in tube #1. 1mL red dye 10 ml solution 100% = 10% reddye 4 Investigation 2C: One in a Million

Part 2: Doing the math Each test tube contains a solution with a different concentration of red dye. a. Calculate the concentration of the solution in tube #1.

5 Part 2: Doing the math Each test tube contains a solution with a different concentration of red dye. a. Calculate the concentration of the solution in tube #1. 1mL red dye 10 ml solution 100% = 10% reddye b. Dilution: Solution #2 Now we take solution #1 and dilute it 10 times to make solution #2 1 ml solution #1 10% red dye 1% red dye 10 ml solution = Calculate the concentration of dye in solutions #3 and #4. 5 Investigation 2C: One in a Million

6 Part 2: Doing the math Report your answers in Table 1 b. Dilution: Solution #2 Now we take solution #1 and dilute it 10 times to make solution #2 1 ml solution #1 10% red dye = 1% reddye 10 ml solution Calculate the concentration of dye in solutions #3 and #4. 6 Investigation 2C: One in a Million

7 Part 2: Doing the math c. Calculate the concentration of each solution in parts per million (ppm) Use decimal numbers instead of % so that 10% becomes 0.1 (= 10 / 100) 7 Investigation 2C: One in a Million

Part 3: Measuring concentration For many experiments, the human eye is not

For the next part of the experiment you will use the spectrophotometer in

Sample Reference More light absorbed Less light absorbed We compare the

8 Part 3: Measuring concentration For many experiments, the human eye is not reliable enough to make an objective measurement. For the next part of the experiment you will use the spectrophotometer in the Lab-Master to measure the absorption of the colored solutions. Sample Reference More light absorbed Less light absorbed We compare the amount of light absorbed by a solution compared to a reference (usually water). 8 Investigation 2C: One in a Million

9 Part 3: Measuring concentration The Lab-Master system The on/off button is underneath. If the battery is not charged you may need to connect the AC adapter to the jack labeled Power plug. 9 Investigation 2C: One in a Million

10 Part 3: Measuring concentration You don t need SETUP for this lab The Lab-Master system This button turns on the spectrophotometer Use this button to take a measurement Use this button to calibrate with water Stop watch controls Heater control 10 Investigation 2C: One in a Million

1. Put about 3 ml of clear tap water in a cuvette.

11 1. Put about 3 ml of clear tap water in a cuvette. Put the cuvette in the spectrophotometer. Activate the spectrophotometer and press reference. Part 3: Measuring concentration 2. Put 3 ml of solution #1 in a cuvette. Put it in the spectrophotometer. Measure the absorption. 11 Investigation 2C: One in a Million

12 Part 3: Measuring concentration 3. Record spectrophotometer RB absorbance readings along with the concentration data from Table 1 in Table Repeat Steps 2 and 3 for solutions #2, #3, and #4. Report from Table 1 Report from the Lab-Master 12 Investigation 2C: One in a Million

13 Part 4: Observations a. What can you say about the appearance of the four solutions? How do they compare to each other? Which is the lightest? Which is the darkest? Do any appear the same? Give your answer in two or three sentences. b. Do your observations agree with what you expected? 13 Investigation 2C: One in a Million

14 Part 5: Thinking about what you observed a. What does the spectrophotometer measure? b. How low of a concentration of dye is visible to the eye? This is called the limit of detection by eye. c. How low of a concentration of dye is detectable to the spectrophotometer? What is the limit of detection by this instrument? 14 Investigation 2C: One in a Million

15 Part 6: Plotting the data Plot your data for R, G, and B absorbance values on the chart provided. This chart scales the horizontal axis by powers of 10 so you can fit a wide range of values and still be able to see differences. On ordinary graph paper, a scale that would fit values between 100 and 100,000 would not be able to show the difference between 1,000 and 2, Investigation 2C: One in a Million

16 Part 7: Concentration of an unknown solution 1. Get a sample of a solution with an unknown concentration from your instructor. 2. Measure the RGB absorption values for the unknown solution: R absorbance: G absorbance: B absorbance: 3. Use the graph you created to determine the concentration of the unknown solution in ppm. 16 Investigation 2C: One in a Million

17 Part 8: Thinking about the experiment a. What range of concentration can you measure with the technique you just used? Your answer should give both a lowest and a highest concentration that you think you could measure. b. Do you think you could tell the difference between concentrations of 0.05% and 0.07%? Why or why not? c. Can you tell the differences between concentrations of 0.055% and 0.057%? 17 Investigation 2C: One in a Million

What Is the Relationship Between the Amount of Transmitted Light Through a Solution and Its Concentration?

What Is the Relationship Between the Amount of Transmitted Light Through a and Its Concentration? Blue Food Dye Treats Spine Injury in Rats HTTP://WWW.WIRED.COM/WIREDSCIENCE/2009/07/BLUERATS/ BY HADLEY