PACH PLATE 2 OR 4 HOLE FIXATION

Size: px

Start display at page:

Download "PACH PLATE 2 OR 4 HOLE FIXATION"

Emmeline Ward
5 years ago
Views:

1 2 OR 4 HOLE FIXATION The Science of Fusion PACH_v6.indd 1 6/03/2015 7:10 am

3 PACH Plate Design Rationale The PACH Plate has been designed to be used as an anterior or lateral fixation plate for the thoracolumbar, lumbar and lumbosacral spine. The Pach Plate provides primary fixation for an interbody device which can avoid the need for supplementary posterior fixation. The Pach Plate is indicated for use via an anterior, anterolateral or lateral surgical approach as an adjunct to interbody fusion. It is indicated for the treatment of spine instability as a result of fracture (including dislocation and subluxation), tumour, scoliosis, kyphosis, spondylolisthesis and degenerative disc disease (defined as discogenic pain with the disc degeneration confirmed by radiographic studies and patient history). Contraindications: Inability to gain safe access to the anterior or lateral spine Acute superficial and deeper infections Patients with insufficient bone quality or quantity Vascular anatomy preventing safe placement Obese patients The PACH secured anterior plate is made of TA6V titanium alloy (per ASTM F 136 or ISO 5832 standards) making it MRI compatible. Design Rationals

4 Stability The Pach Plate is shaped to fit the natural lordotic curvature of the spine and contributes to the stability of the spine when used in conjunction with an interbody device. The 2-hole plate option is specifically designed with a smaller footprint for a lateral approach. Additionally, two 2-hole plates can be used anteriorly in place of a 4 hole plate depending on vascular and vertebral anatomy. A combination of three different sizes (28mm, 32mm & 36mm) and two different angles (30º & 50º) for both 2-hole and 4-hole plates are available to ensure there are options to fit a wide range of vertebral body anatomy. Simplicity The Pach Plate is a simple, yet comprehensive stabilisation solution for multiple approaches to the spine. The simplistic design of the instrumentation allows for efficient implantation and reduced surgical steps. The plate geometry and the ridge above the distal screw holes allow for easy placement and the incorporated locking mechanism eliminates additional locking steps reducing the operative time. Design Rationals

5 Surgical Technique The Pach Plate can be implanted via a retroperitoneal, transperitoneal or lateral approach to the spine. Disclaimer: The surgeon performing the procedure must be appropriately trained in the chosen approach to the spine.

6 Positioning the Plate After the appropriate interbody fusion device is implanted, the Pach Plate is placed over the intervertebral disc space using the plate holder. The screw holes in the plate should be located on the vertebral bodies above and below the treated level. There is a ridge above the distal internal surface of the plate to provide a secure seat on the cortical rim of the inferior vertebral body. For maximum stability, two plates may be fitted. 4-hole and 2-hole plates can be used in an anterior approach while only 2-hole places can be used in a lateral approach. N.B. The plates are available in several lengths and angles to meet varied segment heights and angles. Inserting screws Plate fixation to the vertebral bodies is provided by cancellous bone screws. An awl is used to create pilot holes through the screw holes in the plate for screw insertion. The screws fit into the angled circular screw holes of the plate. The screw angle can be varied within +/- 30º. The screw is tightened using a 3mm hex screwdriver which fits into the hexagonal stamp located on the upper side of the screw. The screw length must be determined through pre-operative imaging. A spring strip which covers the screw heads after tightening prevents screw back out. Surgical Technique

7 Cement Augmentation The cancellous bone screws for the Pach Plate are cannulated and fenestrated for cement augmentation in the case of osteoporotic bone. The technique for cement augmentation simply requires an injection of PMMA based vertebral body cement through a provided cannula into the head of the screws. The fenestration in the screws is the same distance from the screw head in each of the screw lengths. The cannula provided in the Pach Plate set fits a standard lure lock syringe. N.B. Some cement systems have unique locking threads and may not be a standard lure lock. Locking Locking is provided by a spring strip which covers the screw heads after tightening. This system prevents any screw pull out. If removal is required, the screws can be unlocked using a special tool. This tool holds the strip flat in its housing while the screw is loosened. Washing After checking for sound final stability of the construct, wash the surgical area thoroughly. Closing Close plane by plane, install a suction drain at iliac crest level, and if necessary at the surgical area (seldom required).

Orthotech Pty. Ltd. 51 Sandgate Road, Albion, QLD 4010 PO Box 203, Albion, QLD 4010 Tel: +61 7 3262 5033 Fax: +61 7 3262 5099 orthotechgroup.

8 Orthotech Pty. Ltd. 51 Sandgate Road, Albion, QLD 4010 PO Box 203, Albion, QLD 4010 Tel: Fax: orthotechgroup.com Manufactured by: A-Spine Asia Co. Ltd. 11F, No 1, Alley 30, Lane 358, RuiGuang Road, NeiHu District, Tapei City, Taiwan Tel Fax GMP

Thoracolumbar Spine Locking Plate (TSLP) System. A low-profile plating system for anterior stabilization of the thoracic and lumbar spine.

Thoracolumbar Spine Locking Plate (TSLP) System. A low-profile plating system for anterior stabilization of the thoracic and lumbar spine. Technique Guide Instruments and implants approved by the AO Foundation