Amsco Surgical Table Accessories Catalog

Transcription

1 SURGICAL TABLES Amsco Surgical Table Accessories Catalog Providing complete flexibility for patient positioning

2 How to Order On the following pages you will find specifications for accessories to be used on STERIS s Cmax, Amsco 3080, 3080-R, 3085 SP, OrthoVision Surgical Tables, and the SurgiGraphic Image Guided Tables. For more information about STERIS s standard and custom surgical accessories, contact your STERIS Account Manager, or call In Canada, call To place your order call our toll-free number, , Monday through Friday, between 7 a.m. and 9 p.m. (EST). Our Inside Sales Representatives will be glad to assist you. Thank you for your business. When placing your order, please be prepared to provide the following information: Your name Phone number Name and address of institution (ship to and bill to) Account number (if you do not have an account, please indicate so when placing your order) Purchase order number Catalog equipment number Quantity The Value You Expect From STERIS Corporation Exceptional reliability and the highest quality have made the difference with Amsco brand products and systems for over 100 years. The design and engineering excellence behind all STERIS products and systems assures maximum reliability, performance, and value. STERIS surgical table accessories and support systems provide complete flexibility for patient positioning, no matter how difficult the procedural or imaging requirements. These products assure you increased productivity, ease of use, and long term reliability. No other surgical table system better meets the challenges of today s operating room. STERIS surgical tables have total patient weight limitations. Accessories and accessory systems also have total patient weight limitations based on the proportional weight of the intended body part(s) supported by the accessory. When more than one accessory is used to support a patient body part, the overall rated load will be that of the weakest accessory in the system or the surgical table to which it is applied. Known total patient weight limitations for surgical tables and accessories are identified throughout this catalog. All personnel should be informed of these limitations. Refer to the Operator's Manual supplied with each table for more information and proper use instructions. STERIS Warranty STERIS Corporation is committed to customer satisfaction. STERIS will correct any defects(s) in material or workmanship occurring during the warranty period in accordance with the following terms: For 12 months after the warranty start date, STERIS Corporation will provide free replacement parts for all equipment (except surgical table pads and hand controls) that does not perform according to its specifications. For 90 days after the warranty start date, STERIS Corporation will provide free replacement parts for surgical table pads and surgical table hand controls that do not conform to STERIS's specifications. All work on STERIS equipment during the warranty period must be performed by a qualified technician. For more information, see STERIS s Warranty and Customer Assistance Information booklet, P

3 Table of Contents Surgical Tables Accessory Packages/Accessory Carts Accessories by Function Table Pads/Pressure Management Table Accessory Pads Radiology/X-ray Tops Table Operating Controls Body Supports Body Restraints Clamps & Sockets Arm Supports Head Rests Leg Supports Table-specific Accessories Cmax Table Accessories SurgiGraphic Table Accessories Accessories by Procedure Anesthesia Accessories Bariatric Accessories Neurosurgical Accessories Ophthalmology/ENT/Plastic Headrest Accessories Orthopedic Accessories Pediatric Accessories Urology Accessories Disposables/Cleaning Supplies Indices

4 Surgical Tables Cmax Surgical Table Equipment #: ST (without X-ray top) ST (with X-ray top) This table has the best combination of the most important features required for an OR table. Cmax combines all the positioning capabilities of a full function general surgical table with the radiolucence and precise mobility of an imaging table and the patient weight capacity of a bariatric table. This 4-section I/A compatible tabletop (with 2" TLT pads) has 18" of longitudinal slide, 30 Trendelenburg/Reverse, 20 lateral tilt, a 4" motorized radiolucent kidney elevator, and a leg section that is both powered and easily removable. Unique features include a sectional conflict alert system (AutoLimit Sensor), dual power modes (IntelliPower), auto diagnostics (e-serve) and a smart hand control that gives table positioning status on a digital readout. NOTE: 1,100 lb (500 kg) patient support, including raise / lower, 1,000 lb (454 kg) full patient posturing, 600 lb (272 kg) patient posturing, including table top slide. SHIPPING: Approximate shipping weight is 560 lb (250 kg). Amsco 3085 SP Surgical Table Equipment #: ST (battery-powered) ST (electric-powered) ST (battery-powered, with X-ray top) ST (electric-powered, with X-ray top) ST (battery-powered, HERMES -ready) ST (electric-powered, HERMES-ready) ST (battery-powered, ACT-enabled for Karl Storz OR 1 ) ST (electric-powered, ACT-enabled for Karl Storz OR 1 ) The Amsco 3085 SP table has the largest installed product base in North America. It is recognized as the industry standard due to its proven versatility and reliability. The radiolucent 4-section tabletop offers complete upper and lower body imaging coverage. A carbon fiber orthopedic extension accessory is available to provide the procedural flexibility of a dedicated orthopedic fracture table. All table models come standard with 2-inch (51-mm) TLT pressure management pads, and features a perineal cutout, built-in kidney elevator, and a complete integral back up power capability. NOTE: Maximum patient weight capacity is 1000 pounds (454 kg) in Normal Orientation and 500 pounds (227 kg) in side tilt or in Reverse Orientation. SHIPPING: Approximate shipping weight for electric-powered tables is 918 lb (416 kg), and for battery-powered tables is 920 lb (417 kg). X-ray tops add 40 lb (18 kg) to the shipping weight. Surgical Tables 1

5 Surgical Tables SurgiGraphic 6000CE Image Guided Surgical Table Equipment #: TA01 For surgeons on the cutting edge of image-guided techniques, the SurgiGraphic 6000 table is the most advanced image guided table ever designed. It offers a completely new level of operating room performance and control. The manual float capability allows surgeons to position a patient's anatomy relative to the C-arm with extreme precision and can help speed up procedures. The metal-free radiolucent beveled edges of the table help achieve unobstructed imaging and reduced potential for radiation scatter for increased patient and staff safety. NOTE: Maximum patient weight capacity is 500 pounds (227 kg), including slide and all articulations. SHIPPING: Approximate shipping weight is 1450 lb (657 kg). SurgiGraphic 6000FB Fixed-base Image Guided Surgical Table Equipment #: TA03 The fixed-base version of the SurgiGraphic 6000 table was designed for dedicated imaging suites. This table has all of the features and capabilities of the SurgiGraphic 6000CE table model, but is installed directly to the floor. The only difference between the two models is the removal of the base platform, which lowers the table height range by three inches (to 30-1/2" to 39-1/2"). NOTE: Maximum patient weight capacity is 500 pounds (227 kg). SHIPPING: Approximate shipping weight is 1450 lb (657 kg). SurgiGraphic 1027 Image Guided Surgical Table Equipment #: TA02 For pain management specialists and surgeons performing image-guided procedures, the SurgiGraphic 1027 offers optimal C-arm access, motorized articulation and positioning (including height up/down, tilt left/right, and Trendelenburg/Reverse), and high quality imaging. Its open design gives your C-arm 360 degrees and 63" of continuous radiolucent imaging. The reliability and versatility of the SurgiGraphic 1027 table make it a tremendous value for any surgical environment. NOTE: Maximum patient weight capacity is 500 pounds (227 kg). SHIPPING: Approximate shipping weight is 400 lb (181 kg). 2 Surgical Tables

6 Surgical Tables Amsco OrthoVision Surgical Table Equipment #: BE Unmatched for surgical imaging, the OrthoVision orthopedic table includes radiolucent abductor bars for imaging bone without distortion or obstruction. The OrthoVision table positions patients for the full spectrum of orthopedic procedures with enhanced C-arm access. It includes lateral translating tabletop, standard siderails, and swivel casters for easy positioning. NOTE: Maximum patient weight capacity is 400 pounds (181 kg). SHIPPING: Approximate shipping weight is 850 lb (386 kg) R Remanufactured Amsco Surgical Table Equipment #: RC3 (battery / electric-powered) With STERIS's remanufacturing program, we disassemble previously owned 3080 or 3085 tables and meticulously inspect, clean, and disinfect every working part. These brilliant, like-new tables are completely updated and refurbished to fit your clinical needs and your budget. All 3080-R remanufactured tables are rebuilt to our factory test specifications using 100% quality OEM parts, and come with a one-year parts and labor warranty. Please reference sales brochure M2871EN for a detailed explanation of the remanufacturing process. NOTE: Maximum patient weight capacity is 600 pounds (272 kg). SHIPPING: Approximate shipping weight is 920 lb (417 kg). Surgical Tables 3

7 Accessory Packages for Cmax Tables Cmax Standard Accessory Package w/3" Armboard (to be used with X-ray tops) Equipment #: BF564 w/standard Length Restraint Strap BF565 w/extra Long Restraint Strap Anesthesia Armboard, qty. 2, w/3-inch TLT Pad (BF804) Cable Wrap (BF316) Foot Extension with Siderail Locks (BF2) Restraint Strap, Standard Length, 66-1/2-inch (BF45) OR Extra Long, 126-inch (BF451) Cmax Standard Accessory Package w/2" Armboard Pad (to be used without X-ray tops) Equipment #: BF566 w/standard Length Restraint Strap BF567 w/extra Long Restraint Strap Anesthesia Armboard, qty. 2, w/2-inch TLT Pad (BF803) Cable Wrap (BF316) Foot Extension with Siderail Locks (BF2) Restraint Strap, Standard Length, 66-1/2-inch (BF45) OR Extra Long, 12-inch (BF451) Cmax Uro/Endo Accessory Package Equipment #: BF576 Cmax Uro/Endo Extension (BF575) Patient Transfer Board with 2 (51 mm) Pad (BF204) Power-lift Stirrup (set) (BF453) (with siderail clamps) Power-lift Stirrup Storage Cart (BF46) Fluid Collector System (BF457) Fluid Collector Bag, Non-sterile, Box of 10 (BF459) Cmax Uro/Cysto Accessory Package Equipment #: BF574 Cmax Transfer Board (BF588) Power-Lift Stirrup (set) (BF453) (with siderail clamps) Power-Lift Stirrup Storage Cart (BF46) Fluid Collector System (BF457) Fluid Collector Bag, Non-Sterile, Box of 10 (BF459) Cmax Foot Control (BF586) Cmax Neurological Accessory Package Equipment #: BF569 Cmax Standard Headrest Adaptor (BF589) Horizontal Attachment #1800 (BF008) Posterior Sitting Attachment #1801 (BF011) Frontal Sitting Attachment #1802 (BF01) Multi-Poise Headrest (BF038) Horseshoe Headrest (BF036) Multi-Posture Armboard w/2 Pad, qty. 2 (BF432) Clark Sockets, qty. 4 (BF083) 4 Accessory Packages

8 Accessory Packages for Cmax Tables Cmax Ophthalmic Accessory Package Equipment #: BF57 Cmax Standard Headrest Adaptor (BF589) Narrow Headrest (BF592) Wrist Rest (BF593) Cmax Foot Control (BF586) Cmax Shoulder Chair Package Equipment #: BF571 Cmax Shoulder Chair (BF594) Multi-Posture Armboard w/2 Pad (BF432) Clark Socket (single) (BF083) Restraint Strap, Standard Length, 66-1/2-inch (BF45) Orthopedic Extension Accessory Package Equipment #: BF806 The Cmax/3085 SP/3080 Orthopedic Extension with abductor bars, mounting bracket, and cart enables hip pinning and supine femoral nailing procedures. Package includes: Wedge-shaped Sacral Rest with Pad - Adult (BF00066) Perineal Post with Pad - Adult (BF00065) L-shaped Traction Extensions (BF0003) - Qty. 2 Anesthesia Armboard with 2-inch Pad (BF803) TenZor Carbon Fiber Traction Unit Assembly with boots (BF72) - Qty. 2 Universal Legholder (BF266) Traction Accessory Clamp (BF0002) - Qty. 2 Multi-Posture Armboard with 2-inch Pad (BF432) Patient Transfer Board with 4-inch Pad (BF214) Accessory Cart (BF24) Clark Socket (BF083) - Qty. 1 Cmax/3085 SP/3080 Ortho Extension Setup Guide (P ) NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Supplemental Accessory Package for Orthopedic Extension (for lateral positioning and skeletal traction) is available on page 8, along with Pediatric Accessory Package. Accessory Packages 5

9 Accessory Packages for Amsco 3080, 3080-R and 3085 SP Tables Standard Accessory Packages w/3-inch Anesthesia Armboard Pad (to be used with X-ray tops) Equipment #: BF413 w/standard Length Restraint Strap BF414 w/extra Long Restraint Strap Anesthesia Armboard, qty. 2, w/3-inch TLT pad (BF804) Perineal Cutout Filler Piece (BF205) Cable Wrap (BF316) Restraint Strap, Standard Length (66-1/2-inch) (BF45) OR Extra Long (126-inch) (BF451) Standard Accessory Packages w/2-inch Anesthesia Armboard Pad (to be used without X-ray tops) Equipment #: BF424 w/standard Length Restraint Strap BF425 w/extra Long Restraint Strap Anesthesia Armboard, qty. 2, w/2-inch TLT pad (BF803) Perineal Cutout Filler Piece (BF205) Cable Wrap (BF316) Restraint Strap, Standard Length (66-1/2-inch) (BF45) OR Extra Long (126-inch) (BF451) Basic Accessory Package Equipment #: BF415 Anesthesia Armboard w/3-inch Pad for (use with X-ray tops) BF417 Anesthesia Armboard w/2-inch Pad for (use without X-ray tops) Anesthesia Armboard, qty. 2, with 3-inch pad (BF804) OR with 2-inch pad (BF803) Perineal Cutout Filler Piece (BF205) Eye-ENT-Neuro Headrest Adaptor (BF185) Cable Wrap (BF316) Foot Extension w/siderail Locks (BF2) IA Extender w/2-inch Pad and accompanying X-ray Top (BF188) Restraint Strap, Standard Length (66-1/2-inch) (BF45) Complete Accessory Package Equipment #: BF416 Anesthesia Armboard w/3-inch Pad (for use with X-ray tops) BF418 Anesthesia Armboard w/2-inch Pad (for use without X-ray tops) Anesthesia Armboard, qty. 2, with 3-inch pad (BF804) OR with 2-inch pad (BF803) Hand Control (BF336) Foot Control (BF187) Perineal Cutout Filler Piece (BF205) Eye-ENT-Neuro Headrest Adaptor (BF185) Drain Pan (BF186) Patient Transfer Board w/2-inch Pad (BF204) Neuro Seat Plate (BF208) Uro X-ray Top w/o Pad (BF313) Foot Extension w/siderail Locks (BF2) Cable Wrap (BF316) Multi-Posture Armboard w/2-inch Pad (BF432) Lateral Brace Assemblies (pair) (BF602) IA Extender w/2-inch Pad and accompanying X-ray Top (BF188) Multi-Accessory Clamps (pair) (BF43) Restraint Strap, Standard Length (66-1/2-inch) (BF45) 6 Accessory Packages

10 Accessory Packages for Amsco 3080, 3080-R and 3085 SP Tables Uro/Endo Accessory Package Equipment #: BF402 Foot Control (BF187) Drain Pan (BF186) Patient Transfer Board w/2-inch Pad (BF204) Uro X-ray Top w/o Pad (BF313) IA Extender w/2-inch Pad and X-ray Top (BF188) Cable Wrap (BF316) Cardiovascular Accessory Package Equipment #: BF412 Fem/Pop Board (BF287) Perineal Cutout Filler Piece (BF205) (See page 22 for Carbon Fiber Fluoro Extension) Neurological Accessory Package Equipment #: BF303 Foot Extension w/siderail Locks (BF2) Eye-ENT-Neuro Headrest Adaptor (BF185) Neuro Seat Plate (BF208) Eye-ENT-Neuro Headrest Adaptor w/4-inch Extension (BF21) Cable Wrap (BF316) Ophthalmic Accessory Package Equipment #: BF304 Eye-ENT-Neuro Headrest Adaptor (BF185) Ophthalmic Headrest (BF154) Foot Control (BF187) Cable Wrap (BF316) Bariatric Accessory Package Equipment #: BF55 Bariatric Table Extensions, complete set of 8 (BF541) Bariatric Foot Extension (BF542) Other Attachments Required: Siderail Locks (BF133) Shoulder Table Package Equipment #: BF382 Shoulder Table (BF437) Lateral Brace Assemblies, qty. 2 (BF602) Multi-Posture Armboard, qty. 2, w/2-inch pad (BF432) Restraint Strap, Standard Length (66-1/2-inch) (BF45) Other Attachments Required: Siderail Locks (BF133), and Multi-Accessory Clamps (BF43) or Clark Sockets (BF083), Shoulder Table Chin Cups (BF42); Optional-Shoulder Table Instructional Wall Chart (BF353) Accessory Packages 7

11 Accessory Packages for Amsco 3080, 3080-R and 3085 SP Tables Orthopedic Extension Accessory Package Equipment #: BF806 The Cmax/3085 SP/3080 Orthopedic Extension with abductor bars, mounting bracket, and cart enables hip pinning and supine femoral nailing procedures. Package includes: Wedge-shaped Sacral Rest with Pad - Adult (BF00066) Perineal Post with Pad - Adult (BF00065) L-shaped Traction Extensions (BF0003) - Qty. 2 Anesthesia Armboard with 2-inch Pad (BF803) TenZor Carbon Fiber Traction Unit Assembly with boots (BF72) - Qty. 2 Universal Legholder (BF266) Traction Accessory Clamp (BF0002) - Qty. 2 Multi-Posture Armboard with 2-inch Pad (BF432) Patient Transfer Board with 4-inch Pad (BF214) Accessory Cart (BF24) Clark Socket (BF083) - Qty. 1 Cmax/3085 SP/3080 Ortho Extension Setup Guide (P ) NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessory Packages for Cmax/3085 SP/3080 Orthopedic Extension Supplementary Accessory Package Equipment #: BF808 This package extends procedure capability of the Cmax/3085 SP/3080 Orthopedic Extension to include lateral patient positioning and skeletal traction. Package includes: Tibia/Lateral Countertraction Support (BF00062) Hip Rest with Pad (BF00072) Surgical Drape Support w/clark Socket and Traction Accessory Clamp (BF00018) Straight Traction Extension (BF268) Traction Bow/Block, Skeletal (BF724) Traction Block, Skeletal (BF725) Traction Accessory Clamp (BF0002) Pediatric Accessory Package Equipment #: BF809 Wedge-shaped Sacral Rest w/pad - Child (BF00048) Perineal Post w/o Pad - Child (BF41) Foot Traction Boots - Child, pair (BF723) Hip Spica Assembly - Child (BF00038) 8 Accessory Packages

12 Accessory Packages for SurgiGraphic 6000 Tables Standard Accessory Package Equipment #: TA005 Patient Safety Straps, pair (TA00001) Standard Siderail Adaptors, set of 3 (TA00005) Universal Ether Screen w/clark Socket (BF074) Cable Wrap (BF316) Hand Control Bracket (BF318) Anesthesia Armboard w/1-inch Pad (BF448) Vascular Package (SurgiGraphic 6000) Equipment #: TA00501 Catheter Extension (TA00002) Radial AV Fistula Board, includes pad and pair of Siderail Locks (TA00003) Accessory Packages for SurgiGraphic 1027 Tables Standard Accessory Package Equipment #: TA005 Patient Safety Straps, pair (TA00001) Standard Siderail Adapters, set of 3 (TA00005) Universal Ether Screen w/clark Socket (BF074) Cable Wrap (BF316) Hand Control Bracket (BF318) Anesthesia Armboard w/1-inch Pad (BF448) Vascular Package (SurgiGraphic 1027) Equipment #: TA00502 Radial AV Fistula Board, includes pad and pair of Siderail Locks (TA00003) Accessory Packages 9

13 Accessory Packages for Amsco OrthoVision Tables Standard Accessory Package Equipment #: BF807 This package enables hip pinning and supine femoral nailing procedures. Package includes: TLT Tabletop Pad (BF323) Wedge-shaped Sacral Rest with Pad - Adult (BF00066) Perineal Post with Pad - Adult (BF00065) L-shaped Traction Extensions (BF0003) - Qty. 2 Anesthesia Armboard with 2-inch Pad (BF803) TenZor Carbon Fiber Traction Unit Assembly with boots (BF72) - Qty. 2 Universal Legholder (BF266) Traction Accessory Clamp (BF0002) - Qty. 2 Multi-Posture Armboard with 2-inch Pad (BF432) Patient Transfer Board with 2-inch Pad (BF213) Clark Socket (BF083) - Qty. 1 Supplementary Accessory Package Equipment #: BF808 This package extends procedure capability to include lateral patient positioning and skeletal traction. Package includes: Tibia/Lateral Countertraction Support (BF00062) Hip Rest with Pad (BF00072) Surgical Drape Support w/clark Socket and Traction Accessory Clamp (BF00018) Straight Traction Extension (BF268) Traction Bow/Block (BF724) Traction Block, Skeletal (BF725) Traction Accessory Clamp (BF0002) Pediatric Accessory Package Equipment #: BF809 Wedge-shaped Sacral Rest w/pad - Child (BF00048) Perineal Post w/o Pad - Child (BF41) Foot Traction Boots - Child, pair (BF723) Hip Spica Assembly - Child (BF00038) 10 Accessory Carts

14 Accessory Carts Table Accessory Cart Equipment #: BF7 This stainless steel cart features four shelves to accommodate storage of a full variety of accessories and is essential for an organized, productive OR. The four casters allow it to be move from room to room easily to adapt to your surgical schedule. (Accessories not included.) For a complete listing of all of the accessory packages available from STERIS, please refer to pages Orthopedic Extension Cart Equipment #: BF24 The Orthopedic Extension Cart was specifically designed with risers on the top of the cart to hold the abductor bar assembly of the Orthopedic Extension. These small stainless steel platforms allow OR staff to wheel the cart right up to the table for quick, easy and safe attachment of the Orthopedic Accessory. The cart also features four shelves to organize all related accessories, which are sold separately. (See page 8 for Orthopedic Exension acessory packages) A-Frame Accessory Cart Equipment #: BF27 This mobile peg board, constructed of 16-gauge stainless steel, is extremely durable and easily maintained and cleaned. It comes equipped with 24 single, 12 double, and 4 J hooks, enabling accessories of various sizes and shapes to be attached for easy access or storage. The cart also contains a storage bin and two storage shelves located between the cart walls. (Accessories not included.) Accessory Carts 11

15 Accessory Carts Bariatric Accessory Storage Cart Equipment #: BF551 This cart is a compact storage and transport device for the full range of STERIS bariatric accessories. The eight side rails were specifically designed to accommodate each of the unique Bariatric Width Extensions. The two back rails easily hold STERIS s Split Leg Positioner or other leg holder accessories. Other accessories may be attached to interior rails or stored in the deep bin / weighted base. (Accessories not included.) (See page 46 for Bariatric accessories) Power-lift / Bariatric Power-lift Stirrup Storage Cart Equipment #: BF46 This cart provides stable, lightweight, portable storage for your surgical stirrups, table clamps and other leg holder accessories; the pre-configured handles allow safe and easy transport. The cart was designed with an integral set of support prongs that accommodate either the Power-lift Stirrups or the Bariatric Power-lift Stirrups. (Accessories not included.) (See page 38 for Power-lift accessories) Shoulder Table Accessory Cart Equipment #: BF461 This dual purpose storage cart was specifically engineered to hold the Shoulder Table, the Cmax Shoulder Chair or the Shoulder Beach Chair and related accessories, and has a weighted base that makes this cart tip-resistant. The ergonomic design helps ensure that devices are always at a convenient height for the user to reduce the potential of back strain. The optional accessory hooks allow quick and easy organization and storage of components and posturing accessories, and the deep bin in the base provides additional valuable storage space. (Accessories not included.) (See pages 5 and 7 for shoulder accessory packages or page 54 for shoulder positioning devices) 12 Accessory Carts

16 Table Pads / Pressure Management Tri-Layer Technology TLT Tabletop Pressure Management Pads Tri-Layer Technology pressure management pads are standard to all surgical tables. They provide excellent pressure management, comfort for the patient, and reduce the potential for tissue damage. Minimal attenuation of C-arm or X-ray image quality. Pad is 2 inches (51 mm) thick. Velcro strips attach pad to table. Layers of Protection of Tri-Layer Technology Fusion Two Way Stretch Cover Soft Slow Recovery Foam Cushioning Foam High Density Foam Anti-Static Lectrolite Cover Cmax Tabletop Pads Equipment #: BF58 TLT Pad Complete set BF581 TLT Pad Head section BF582 TLT Pad Back/Seat Section BF583 TLT Pad Leg Section Amsco 3080, 3080-R and 3085 Tabletop Pads Equipment #: BF321 TLT Pad - Complete Set BF TLT Pad - Head Section BF TLT Pad - Back/Seat Section BF TLT Pad - Leg Section Accessories by Function 13

17 Table Pads / Pressure Management SurgiGraphic 6000 Tabletop Pads Equipment #: TA00007 TLT Pad SurgiGraphic 1027 Tabletop Pads Equipment #: TA0001 TLT Pad OrthoVision Tabletop Pads Equipment #: BF323 TLT Pad 14 Accessories by Function

18 AQUAGEL Pressure Management Pads AQUAGEL Pads can be used on any surgical table surface and employ dual density construction, integral 3-dimensional cradling, anatomically specific contouring, and volumetric re-distribution of pressure to help provide greater control over pressure management in the OR. AQUAGEL Contoured Head Protector Equipment #: BF463 Adult (10 x 10 x 2 ) This comfortable three-dimensional Contoured Head Protector provides stability and pressure management for supine and lateral positioning. AQUAGEL Prone Headrest Equipment #: BF464 Large (11 x 9 x 6 ) BF465 Medium (9 x 7 1/2 x 5 ) The unique molded design of the lightweight AQUAGEL Prone Headrest permits easy endotrachial tube access. The positioner provides stability, supports the forehead and chin and protects the eyes. Companion products include flat-bottom chest rolls (BF483 large or BF482 medium), or the prone positioner (BF485). AQUAGEL Supine Headrest Equipment #: BF466 Large (10 3/4 x 9 1/2 x 3 1/2 ) BF467 Medium (10 1/2 x 9 1/2 x 2 1/2 ) This ergonomically molded supine headrest is ideal for positioning the patient during eye surgery as well as for other procedures requiring the supine position. AQUAGEL Contoured Armboard Protectors Equipment #: BF476 Large (18 x 7 x 1 1/2 ) BF475 Medium (13 x 5 1/2 x 1 ) AQUAGEL Arm Protectors are ergonomically designed to conform to each patient s arm. The dual-density three-dimensional construction manages and re-distributes pressure as well as provides protection for skin tissue and nerves. AQUAGEL Armboard Pad Equipment #: BF427 Large (23 1/2 x 5 x 1/2 ) BF426 Medium (15 x 4 x 1/2 ) Armboard Pads are available in two sizes to accommodate the requirements of any armboard. AQUAGEL Flat-bottom Chest Roll Equipment #: BF483 Large (20 x 6 x 4 ) BF482 Medium (16 x 6 x 4 ) This positioner is used for prone and lateral postures, and may be used in conjunction with the prone positioner (BF485) and prone headrest (BF461 large / BF465 medium). AQUAGEL Prone Positioner Equipment #: BF485 Adult (24 x 20 1/2 x 4 1/2 ) The unique shape of the Prone Positioner is ideal for spinal procedures. Use this positioner in conjunction with the Prone Headrest (BF461 large or BF medium), Flat-bottom Chest Rolls (BF483 large or BF482 medium) and the Patient Positioner (BF00) for proper patient alignment. AQUAGEL Lateral Positioner Equipment #: BF484 Adult (28 x 20 x 6 ) Use this posturing device for all procedures requiring lateral postures. The Lateral Positioner permits a safe, quick and easy transition from supine to lateral. The patient s lower shoulder fits into the integral channel to provide exceptional patient comfort and nerve protection. The builtin headrest and axilliary support assists in proper spinal alignment and surgical site access. Accessories by Function 15

19 AQUAGEL Pressure Management Pads AQUAGEL Pads can be used on any surgical table surface and employ dual density construction, integral 3-dimensional cradling, anatomically specific contouring, and volumetric re-distribution of pressure to help provide greater control over pressure management in the OR. AQUAGEL Dual Density Patient Positioner Equipment #: BF481 Adult (16 x 5 3/4 x 2 1/2 ) This versatile dual-density volumetric product may be used to posture and protect patients while in supine, lateral and prone positions. AQUAGEL Contoured Sacral Protector Equipment #: BF474 Adult (15 3/4 x 15 x 1 ) The Sacral Protector is an essential positioner for all supine patients, especially those in the Lithotomy position. This dual-density three-dimensional positioner is contoured specifically to re-distribute pressure away from the sacrum. Recommended companion products are either the 20 Profile pad (BF471) or the 45 Profile pad (BF472). AQUAGEL Contoured Leg Protector Equipment #: BF478 Large (20 x 7 x 1 1/2 ) The dual-density three-dimensional contoured leg protector provides ultimate pressure relief for the heel as it stabilizes the lower leg and protects the knee from hyperextension. AQUAGEL Crutch Stirrup Pads (pair) Equipment #: BF48 Adult (15 1/2 x 9 1 /2 x 1/2 ) The lightweight, flexible Crutch Stirrup can be used with various legholders to protect the nerves and vessels in the popliteal fossa during Lithotomy posturing. These flat gel pads contain a silicone gel that most closely replicates human tissue to protect skin and nerves. AQUAGEL Contoured Heel Protectors (pair) Equipment #: BF477 Standard size (7 1/2 x 7 x 1 ) These dual-density three-dimensional contoured support devices provide heel protection and positioning stability. AQUAGEL Contoured Profile Table Overlay Equipment #: BF472 3/4-length table pad (45 x 20 1/2 x 1/2 ) BF471 Universal table pad (20 1/2 x 20 1/2 x 1/2 ) Use these pads for the many variations of prone, supine, Lithotomy or lateral posturing. The proprietary dual-density three-dimensional waffle design is 20% lighter weight than standard flat pads and the unique shape increases the patient-to-surface area contact by 33%. They are valuable companions to many other AQUAGEL positioners. AQUAGEL Table Overlays Equipment #: BF47 3/4-length table pad (45 x 20 1/2 x 1/2 ) BF468 Universal table pad (20 1/2 x 20 1/2 x 1/2 ) BF473 Full-length table pad (70 x 20 1/2 x 1/2 ) Use any of these flexible overlays in conjunction with other AQUAGEL positioners. The two smaller pads feature dual-density construction to help ensure the highest level of pressure reduction and skin shear protection offered by any flat gel surface. AQUAGEL Orthopedic Boot Pad Equipment #: BF727 Orthopedic boot pad This flexible, durable pad was designed for use in orthopedic foot traction boots to help reduce pressure and protect against skin shear. 16 Accessories by Function

20 Table Accessory Pads Tri Layer Technology TLT Table Accessory Pads Tri Layer Technology pads are standard to all STERIS Surgical Tables and accessories. They provide excellent pressure management, comfort for the patient, and reduce the potential for tissue damage. Minimal attenuation of C-arm or X-ray image quality. Velcro strips attach pad to the accessory. IV and Anesthesia Armboard Pads 1-inch (25-mm), 2-inch (51-mm) & 3-inch (76-mm) Equipment #: BF345 1-inch Pad (25-mm) BF326 2-inch Pad (51-mm) BF327 3-inch Pad (76-mm) Table Compatibility: Amsco 3080, 3080-R, 3085 SP, OrthoVision, and SurgiGraphic tables Usage: Surgical procedures requiring extended arm support Bariatric Width Extender Pads, Cmax tables (no X-ray tops), 2" tall Equipment #: BF652 Complete Set of 8 BF654 Set of 4; two Seat and two Back section BF656 Set of 2; Head section BF658 Set of 2; Leg section These 2" (51-mm) tall pads are used in conjunction with Cmax Bariatric Width Extensions (refer to page 46) when there are no x-ray tops applied to the table. Cmax Bariatric Width Extensions can either be ordered with 2" or 4" tall pads; these 2" tall pads are useful to convert from a system for X-ray tops to one without. Bariatric Width Extender Pads, Cmax tables (with X-ray tops), 4" tall Equipment #: BF653 Complete Set of 8 BF655 Set of 4; two Seat and two Back section BF657 Set of 2; Head section BF659 Set of 2; Leg section These 4" (102-mm) tall pads are used in conjunction with Cmax Bariatric Width Extensions (refer to page 46) when x-ray tops (BF584) have been applied to the table. Cmax Bariatric Width Extensions can either be ordered with 2" or 4" tall pads; these 4" tall pads are useful to convert from a system without X-ray tops to one that has X-ray tops applied. Bariatric Width Extender Pads, 3080/3085 tables (with X-ray tops), 4" tall Equipment #: BF556 Complete Set of 8 BF557 Set of 4; two Seat and two Back section BF558 Set of 2; Head section BF559 Set of 2; Foot section These 4-inch (10cm) tall pads are compatible with X-ray tops BF202 when used in conjunction with Bariatric Width Extensions BF541, BF553, BF554, or BF555 (refer to page 46). Accessories by Function 17

21 Replacement Accessory Pads/ Arm, Leg and Body Supports Multi-Posture Armboard Pad 2-inch (51-mm) Equipment #: BF81 Compatible with Multi-Posture Armboard BF432 (Refer to page 32) Micro-Surgical Arm and Hand Table Pad 2-inch (51-mm) Equipment #: BF811 Compatible with Micro-Surgical Arm and Hand Table BF436 (Refer to page 33) Adult Arm and Hand Table Pad 2-inch (51-mm) Equipment #: BF812 Compatible with Adult Arm and Hand Table BF435 (Refer to page 33) Pediatric Arm and Hand Table Pad 2-inch (51-mm) Equipment #: BF814 Compatible with Pediatric Arm and Hand Table BF434 (Refer to page 33) Multi-axis Armboard Pad Equipment #: BF00029 Compatible with Multi-axis Armboard BF70929 and Multi-axis Armboard RC BF71239 (Refer to page 31) Arthroscopy Knee Holder Pad Set Equipment #: BF718 Three piece set compatible with Athroscopy Knee Holder BF717 (Refer to page 62) Culdoscopic Knee Rest Equipment #: BF815 Compatible with Culdoscopic Knee Rest BF066 (Refer to page 40) Foot Extension Pad 2-inch (51-mm) Equipment #: BF816 Compatible with 20 wide Amsco 3080 and 3085 Foot Extensions BF2 (Refer to page 40) Fem/Pop Board Pad 2-inch (51-mm) Equipment #: BF817 Compatible with Fem/Pop Board BF287 (Refer to page 21) Patient Transfer Board Pad 2-inch (51-mm) OrthoVision Equipment #: BF818 Compatible with Patient Transfer Board BF213 (Refer to page 56) Patient Transfer Board Pad 4-inch (102-mm) Orthopedic Extension Equipment #: BF819 Compatible with Patient Transfer Board BF214 (Refer to page 55) 18 Accessories by Function

22 Replacement Accessory Pads/ Orthopedic, Misc. Patient Transfer Board Pad 2-inch (51-mm) 3080 / 3085 Equipment #: BF82 Compatible with Patient Transfer Board BF204 (Refer to page 67) Perineal Post Pad Disposable Equipment #: NO001 (Case of 10) Compatible with Perineal Post BF00065 (Refer to page 62) T-Shaped Sacral Rest Pad 2-inch (51-mm) Equipment #: BF824 Compatible with T-Shaped Sacral Rest BF00073 (Refer to page 61) Wedge-Shaped Sacral Rest Pad 2-inch (51-mm) Adult Equipment #: BF825 Compatible with Adult Wedge-Shaped Sacral Rest BF00066 (Refer to page 61) Wedge-Shaped Sacral Rest Pad 2-inch (51-mm) Child Equipment #: BF826 Compatible with Child Wedge-Shaped Sacral Rest BF00048 (Refer to page 61) Hip Rest Pad 2-inch (51-mm) Equipment #: BF827 Compatible with Hip Rest BF00072 (Refer to page 61) IA Board Pad 2-inch (51-mm) Equipment #: BF828 Compatible with IA Board (OrthoVision) BF00025 (Refer to page 56) IA Extender Pad 2-inch (51-mm) Equipment #: BF829 Compatible with IA Extender BF188 (Refer to page 66) Cone-Shaped Headrest Pad 2-inch (51-mm) Equipment #: BF83 Compatible with Cone-Shaped Headrest BF215 (Refer to page 35) Cone-Shaped Headrest Pad 4-inch (102-mm) Equipment #: BF831 Compatible with Cone-Shaped Headrest BF215 (Refer to page 35) Cushion for Double-articulating Headrest Equipment #: BF599 Two-inch (51-mm) TLT pad; compatible with Double-articulating Headrest BF587 (Refer to page 34) Accessories by Function 19

23 Radiology/X-ray Tops X-ray Tops Cmax Table Equipment #: BF584 Complete set BF636 Head section BF637 Back Section BF638 Seat Section BF639 Leg Section Removable X-ray tops mount onto surgical table, covering its full length and width. The X-ray tops consist of four sections: head, back, seat, and leg, all of which are radiolucent. Two-inch (51-mm) standoffs add elevation to tabletop, providing space to insert flat X-ray cassettes from head, foot, or side of table. Velcro strips are provided for pad attachment; use with existing table pads. NOTE: Maximum patient weight capacity is 1100 pounds (500 kg). X-ray Tops Amsco 3080, 3080-R and 3085 SP Tables Equipment #: BF202 Removable tops mount onto surgical table, covering its full length and width. Consists of four radiolucent sections: head, back, seat, and foot. Two-inch (51-mm) standoffs add elevation to tabletop, providing space to insert hard X-ray cassettes from head, foot, or side of table. Velcro strips are provided for pad attachment; use with existing table pads. NOTE: Maximum patient weight capacity is 1000 lb (454 kg) for 3085 SP, 600 lb (272 kg) for 3080-R, and 400 lb (181 kg) for 3080 tables. Uro X-ray Top Equipment #: BF313 Simplifies urologic procedure imaging requirements by permitting 11-inch x 17-inch (279-mm x 432-mm) X-ray cassettes to be loaded from either side of table. This eliminates X-ray shadowing and kidney elevator interference, and does not compromise surgical or anesthesia access. Inserts over back section and IA extender. Velcro strip is included for pad attachment; use with existing table pad. Other Attachments Required: IA extender (BF188) Table Compatibility: 3080 and 3085 SP tables Usage: Urologic procedures NOTE: Maximum patient weight capacity is 750 lb (340 kg) for 3085 SP, 600 lb (272 kg) for 3080-R, and 400 lb (181 kg) for 3080 tables. 20 Accessories by Function

24 Radiology/X-ray Tops 36" Carbon Fiber Fluoro Extension Equipment #: BF642 The Carbon Fiber Fluoro Extension features metal-free radiolucent beveled edges for 360 imaging and increases upper or lower body imaging to 55" (140 cm) when applied to the Cmax table and to 36" (914 mm) when applied to the 3080, 3080-R and 3085 SP tables. This 36" (914 mm) long accessory broadens the surgical capabilities of STERIS general surgical tables for cardiovascular, AV fistulas, pain management, and other procedures requiring the enhanced imaging ability typically found on image guided surgical tables. Includes 2 inch pad. Table Compatibility: Cmax, 3080, 3080-R, and 3085 SP tables Usage: Cardiovascular, AV fistulas, pain management, and other imaging procedures. NOTE: Maximum patient weight capacity is 350 lb. (160 kg) for Cmax, 400 lb. (181 kg) for 3080, and 500 pounds (227 kg) for 3080-R and 3085 SP tables. Orthopedic IA Board with 2-inch (51-mm) Pad Equipment #: BF00025 For supine, prone, and lateral procedures using C-arm imaging. Fits into two access holes under sacral rest. Allows table to be used for general surgical procedures that do not need flex or reflex table positioning or a kidney elevator. Patient can be postured in reverse orientation for upper body imaging. Table Compatibility: OrthoVision tables Usage: Pacemaker placement, myelograms, spinal screws, and vascular access procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Fem/Pop Board Equipment #: BF287 Increases lower body imaging capability to 55 inches (1400 mm) of continuous imaging coverage. Radiolucent top extends approximately 22 inches (560 mm) and inserts into leg section of table. Includes a 2-inch (51-mm) pad and X-ray top. No support leg needed. For support of patient s legs only. Velcro strip attaches pad to table. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Cardiovascular procedures requiring C-arm imaging NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Function 21

25 Radiology/X-ray Tops Cmax Uro/Endo Extension Equipment #: BF575 This lightweight 18" (457 mm) long carbon fiber extension provides additional fluoro imaging length assuring uninterrupted imaging of Kidney, Ureter and Bladder (KUB) anatomy of tall patients (6' 2" model shown). It easily attaches to the side rails of Cmax table s seat section once the leg section is removed, and includes standard side rails for applying leg holders, Fluid Collector System, and arm supports. An integral sub X-ray cassette channel also allows imaging with flat cassettes. Other Accessories Required: Patient Transfer Board with 2" pad (BF204) Table Compatibility: Cmax tables NOTE: Maximum patient weight capacity is 800 lb (363 kg) with the table top centered, and 400 lb (181 kg) with the table top slid fully toward patient s feet. IA Extender with 2" (51-mm) Pad and X-ray Top Equipment #: BF188 This accessory serves two purposes: (1) for patients in Normal Orientation, the IA Extension is attached between the head and back section of the table to add 8" of imaging length to accommodate taller patients and extends upper body fluoroscopic coverage, and (2), for patients in Reverse Orientation, the IA Extension is attached to the back section of the table to lengthen the imaging window to 24" (61 cm) ideal for endourology applications. The Fluid Collection System (BF205) or Drain Pan (BF186) can be attached. Other Accessories Required: Patient Transfer Board with 2" pad (BF204) Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Endourologic, KUB, and Lithotomy procedures. NOTE: Maximum patient weight capacity is equivalent to that of the table. Cassette Tray with Handle 11" x 14" (279 x 356-mm) Film Equipment #: BF146 Positions hard X-ray cassettes at any section of the surgical table. Tray measures 12" x 16" (305 x 406 mm). Detachable handle is graduated in 1" (25 mm) increments from 10" (254 mm) to 36" (914 mm) to facilitate cassette placement. Handle is approximately 30" (762 mm) long. Table Compatibility: 3080, 3080-R and 3085 SP tables Cassette Tray with Handle 14" x 17" (356 x 432 mm) Film Equipment #: BF137 Positions hard X-ray cassettes at any section of the surgical table. Tray measures 15" x 19" (381 x 483 mm). Detachable handle is graduated in 1" (25 mm) increments from 11" (279 mm) to 36" (914 mm) to facilitate cassette placement. Handle is approximately 30" (762 mm) long. Table Compatibility: 3080, 3080-R and 3085 SP tables 22 Accessories by Function

26 Table Operating Controls Hand Control Cmax Tables Equipment #: BF61 The Cmax hand control was designed to give at-a-glance positioning information about the table (including tilt, Trendelenburg, slide, table height and kidney elevation). It also features a sectional conflict alert button (called Auto Limit Sensor) to help you avoid collisions between table sections, table base and the floor. Table Compatibility: Cmax table Hand Control Cord (Replacement) Cmax Tables Equipment #: BF611 The Cmax hand control was designed with a removable cable that can be replaced if it becomes damaged. Table Compatibility: Cmax table Hand Control Amsco 3085 SP ACT-enabled Table Equipment #: BF374 This replacement hand control was designed to work exclusively with the Automated Control Technologies (ACT) digital integrated OR software. Hand Control Amsco 3080 RL /SP / 3085 SP Tables Equipment #: BF336 Lightweight, removable, fluid-tight, and shock-resistant. This remote control device includes automatic return to level positioning. Also provides for easy patient orientation and a complete array of tabletop articulations. Table Compatibility: 3080 RL/SP, 3080-R and 3085 SP tables Hand Control Amsco 3080 RC Tables Equipment #: BF201 Lightweight, removable, fluid-tight, and shock resistant. Provides for easy patient orientation and a complete array of tabletop articulations. Table Compatibility: 3080 RC table Accessories by Function 23

27 Table Operating Controls Hand Control SurgiGraphic 6000 Series Tables Equipment #: BF35 - SurgiGraphic 6000 CE tables BF33 - SurgiGraphic 6000 tables (old style) Lightweight, removable, fluid-tight, and shock-resistant. This remote control device includes a complete array of tabletop articulations for the anesthesiologist, including four programmable memory function buttons. The Earth Plane Level and Return to Level features return table to level position with the push of a button. Table Compatibility: SurgiGraphic 6000CE and SurgiGraphic 6000FB tables Palm Control SurgiGraphic 6000 Series Tables Equipment #: BF348 - SurgiGraphic 6000 CE tables BF347 - SurgiGraphic 6000 tables (old style) This unique controller gives the surgeon virtually limitless positioning of the patient relative to the C-arm with lateral and longitudinal table float, as well as all discreet motions in between. The manual Palm Control offers the surgeon effortless, precise, and remarkably smooth glide of the table top. This fluidtight, shock-resistant control can be positioned anywhere along the table sides and has a complete array of table top articulations for the surgeon. Table Compatibility: SurgiGraphic 6000CE and SurgiGraphic 6000FB tables Foot Control SurgiGraphic 6000 Series Tables Equipment #: TA00004 Provides surgeon with Trendelenburg/reverse, raise/lower and tilt control during surgical procedures. Unit plugs into receptacle next to hand control on column of table. Table Compatibility: SurgiGraphic 6000CE and SurgiGraphic 6000FB tables. Substitute alternative to same control functions on SurgiGraphic 6000 Palm Control. Hand Control SurgiGraphic 1027 Tables Equipment #: BF346 Lightweight, removable, fluid-tight, and shock-resistant. This remote control device includes a complete array of tabletop articulations for the anesthesiologist, including Trendelenburg/reverse, raise/lower and tilt functions. Table Compatibility: SurgiGraphic 1027 table 24 Accessories by Function

28 Table Operating Controls Foot Control Cmax Table Equipment #: BF586 The foot control provides the surgeon with Trendelenburg/reverse, raise/lower and tilt control during surgical procedures. Table Compatibility: Cmax table Foot Control Amsco 3080/3085 SP Tables Equipment #: BF187 Provides surgeon with Trendelenburg/reverse, raise/lower and side tilt control during surgical procedures. Unit plugs into grey color-coded receptacle next to hand control on table column. Table Compatibility: 3080, 3080-R and 3085 SP tables. Hand Control Bracket Equipment #: BF318 This bracket provides an optimal viewing angle of the hand control for the anesthesiologist as well as a sturdy place for using the hand control. It is attached to either side of the table using a Siderail Lock and is recommended for use when the head section is removed. Table Compatibility: 3080, 3080-R and 3085 SP tables; SurgiGraphic table with use of Standard Siderail Adaptors. Other Attachments Required: Siderail Locks (BF133) Cable Wrap Equipment #: BF316 Attaches the power cord and/or hand control cord to siderail of table for storage. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP and SurgiGraphic tables Accessories by Function 25

29 Body Supports Perineal Cutout Filler Piece Equipment #: BF205 Filler piece covers perineal opening in seat section of table or its accompanying X-ray top. Provides additional patient support. Table Compatibility: 3080, 3080-R and 3085 SP tables Lateral Brace Assemblies (Pair) Equipment #: BF602 Each brace assembly attaches to table using a Siderail Lock and consists of a flat-bar stock attached to an angular control socket and ball joint. Each brace can be positioned horizontally or vertically and can be angled 7 inches (178 mm) internally. Supplied with a 3x7 (76x178 mm) pad. Other Attachments Required: Siderail Locks (BF133) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables. SurgiGraphic tables with use of Standard Siderail Adaptors. Usage: Lateral procedures, orthopedic procedures, etc. Solid Lateral Braces (Pair) Equipment #: BF331 Anatomically curved for comfortable lateral body support. Mount easily on kidney elevator (kidney bridge). Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Chest or lateral procedures See also AQUAGEL Pressure Management Pads (p ) for other products useful in patient positioning (especially lateral and prone positions.) 26 Accessories by Function

30 Body Restraints Restraint Strap Equipment #: BF45 Standard length 66 1/2" (168 cm) BF451 Extra long 126" (320 cm) Designed with quick-release buckles on both ends for easy, positive adjustment. Extra-wide webbing is soil-resistant and washable. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Reverse Trendelenburg Strap (Pair) Equipment #: BF455 Standard BF563 Bariatric The broad pads on these straps safely encircle the inner thigh without binding or pinching, making them ideal for Nissen Fundoplication or other extreme Reverse Trendelenburg procedures. The safety belt buckle ensures a snug fit for patients up to 300 lb (136 kg) on the standard model, or up to 800 lb (363 kg) on the Bariatric model. These straps attach easily and securely to the table with integral rail clamps. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: Reverse Trendelenburg procedures Other Related Accessories: Power-lift Stirrups (BF453) or Bariatric Power-lift Stirrups (BF454) NOTE: Maximum patient weight capacity on the standard model is 300 lbs. (136 kg), and 800 lbs. (454 kg) for the Bariatric model. Knee Restraint Strap (Pair) Equipment #: BF552 The broad pads on these straps safely prevent the knee from flexing during surgery and feature a full-length Velcro closure for a snug fit. Used in conjunction with the Split Leg Positioner, they are ideal for laparoscopic, colo-rectal, vascular, and extreme Reverse Trendelenburg procedures. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: Laparoscopic, colo-rectal, vascular, and extreme Reverse Trendelenburg procedures Other Related Accessories: Split Leg Positioner (BF351), ASC Foot Rests (Left = MTPA09, Right = MTPA10) Accessories by Function 27

31 Body Restraints Lateral Safety Strap Equipment #: BF562 This padded safety strap allows you to secure the operative side of the patient safely and comfortably. Attaches to the side rail with a post that can be inserted into a Clark socket or Multi-accessory clamp. Other Attachments Required: Clark Socket (BF083) or Multi-accessory clamp (BF43) Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables using the Shoulder Table (BF437) or Shoulder Beach Chair (BF561) Usage: Open or closed shoulder procedures NOTE: Maximum patient weight capacity is 500 lbs. (227 kg). Adhesive Strap Holders (Pair) Equipment #: BF085 Help stabilize the patient in lateral and/or chest positions. Wide webbing is secured to table siderails, which allows table articulation without release of straps. Used in conjunction with 3-inch (76-mm) adhesive tape (not included). Eliminates need to apply adhesive tape directly to table siderails. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: General surgical and thoracic procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Does not include tape load rating which may be less. Wristlets with Straps and Brackets (Pair) Equipment #: BF111 Support wrists and forearms while patient is in supine operative position. Padded leather straps secure wrists quickly and comfortably. Supporting brackets, with locks, mount to table siderails for sliding adjustment. Straps, brackets, and siderail locks are included. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables 28 Accessories by Function

32 Clamps & Sockets Clark Sockets (Pair) Equipment #: BF083 Ideal for mounting accessories that have round posts anywhere along table siderail. These sockets provide angular control and positive locking for any accessory in a plane parallel to siderail, and are easily removable. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables. SurgiGraphic tables with use of Standard Siderail Adaptors. Notched Siderail Clamp Equipment #: BF631 The Notched Siderail Clamp attaches to a standard siderail for applying polemounted accessories. The notched collar allows positioning of accessories at a variety of angles relative to the table (in a plane parallel to the siderail). This clamp features dual locking mechanisms; one allows you to re-position the pole-mounted accessory at a different angle or a different height, and one allows you to move the clamp to a different position along the siderail of the table. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. Multi-Accessory Clamp (Pair) Equipment #: BF43 Allows independent release and positioning of horizontal, vertical, and rotational functions, making it easy for one person to adjust the position of accessories. Multi- Accessory Clamps can be applied anywhere along table siderail, and are designed for easy cleaning with no exposed teeth. These clamps are used for securing accessories with either round, square or rectangular posts. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is equivalent to those STERIS table accessories where clamp or lock is specified to be used to support the accessory. Siderail Locks (Pair) Equipment #: BF133 Notched siderail locks attach to table siderails for securing flat-bar stock accessories. Useful with Foot Extensions (BF2 or BF542) either horizontally or vertically. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables. SurgiGraphic tables with use of a Standard Siderail Adaptor (TA00012) Accessories by Function 29

33 Clamps & Sockets Rail Clamps (Spares) Equipment #: BF462 These Rail Clamps come standard with both models (standard and bariatric) of our Power-lift Stirrups, but if needed, individual extra (or replacement) Rail Clamps can be ordered separately. They can be used to support any flat-bar stock accessory perpendicular to the table surface. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Other Related Accessories: Power-lift Stirrups (BF453) and Bariatric Power-lift Stirrrups (BF454) Standard Siderail Adaptor (one) Equipment #: TA00012 Provides attachment of accessories requiring standard siderails. Moveable and removable anywhere along side of table. Table Compatibility: SurgiGraphic 6000 and 1027 tables Standard Siderail Adaptor (set of three) Equipment #: TA00005 Provides attachment of accessories requiring standard siderails. Moveable and removable anywhere along side of table. Table Compatibility: SurgiGraphic 6000 and 1027 tables 30 Accessories by Function

34 Arm Supports Anesthesia Armboard Equipment #: BF431 Armboard without pad BF448 Armboard with 1" (25-mm) pad BF803 Armboard with 2" (51-mm) pad BF804 Armboard with 3" (76-mm) pad The radiolucent carbon fiber armboard is easily attached and removed from surgical table siderail and is easy to clean. Components are enclosed within molded body, protecting against denting, breakage, and damage when dropped. Includes a 30-inch (762-mm) Velcro arm restraint strap. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is 500 lb (227 kg). IV Armboard Equipment #: BF141 Armboard without pad BF365 Armboard with 1-inch (25-mm) pad BF363 Armboard with 2-inch (51-mm) pad BF364 Armboard with 3-inch (76-mm) pad Supports arm at a comfortable angle. Locks by gravity to table siderail. Adjusts 180 degrees horizontally. Supplied with 15-inch Velcro arm restraint strap. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is 500 lb (227 kg). Multi-axis Armboard Equipment #: BF70929 The Multi-axis Armboard allows the arm to be postured to meet the anatomical requirements of each patient. In Trendelenburg / Reverse Trendelenburg postures, the armboard adjusts so the arm can be positioned level to the floor. With the squeeze of a single handle, the armboard permits flexion, extension, abduction / adduction and rotation of the arm. This armboard is also height adjustable. A contoured pad is included. Multi-axis Armboard RC Equipment #: BF71239 The Multi-axis Armboard RC offers all of the same features as the Multi-Axis armboard (BF70929). It also features a rotating clamp that allows attachment to the back section of the table to accommodate the sitting position. In the seated posture, the patient s flexed arm can be adjusted to an ergonomically correct position. A contoured pad is included. Accessories by Function 31

35 Arm Supports Multi-Posture Armboard with 2-inch (51-mm) Pad Equipment #: BF432 Attaches to table siderail with a Clark Socket and is mounted on a ball joint for positioning flexibility. Provides upper arm support during lateral positioning, as well as general arm support during supine, sitting, and park-bench positioning; especially useful during prone positioning for preventing hyperextension. Includes 15-inch (381-mm) Velcro arm restraint strap. Other Attachments Required: Multi-Accessory Clamps (BF43) or Clark Sockets (BF083) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is 500 lb (227 kg). Krause Arm Support Equipment #: BF1 An arm length stockinette supports the arm without noticeable pressure. The support is appropriate for unilateral, prone, supine, and seated positioning of patient. The frame is adjustable for arm length with a universal ball joint and side-rail mounting allowing complete positioning flexibility. A Clark Socket is furnished with each support. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). AQUAGEL Contoured Armboard Protectors Equipment #: BF476 Large (18 x 7 x 1 1/2 ) BF475 Medium (13 x 5 1/2 x 1 ) AQUAGEL Arm Protectors are ergonomically designed to conform to each patient s arm. The dual-density three-dimensional construction manages and re-distributes pressure as well as provides protection for skin tissue and nerves. AQUAGEL Armboard Pad Equipment #: BF427 Large (23 1/2 x 5 x 1/2 ) BF426 Medium (15 x 4 x 1/2 ) Armboard Pads are available in two sizes to accommodate the requirements of any armboard. 32 Accessories by Function

36 Arm Supports Pediatric Arm and Hand Table Equipment #: BF434 Small, lightweight carbon fiber arm and hand table perfect for pediatric procedures and arterial line access. Installation and transportation easy due to light weight and size. (15 W x 24 L) Other Accessories Required: Pair of Clark Sockets (BF083) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is equivalent to that of the table. Adult Arm and Hand Table Equipment #: BF435 Lightweight carbon fiber arm and hand table provides unobstructed C-arm and surgeon access for major and minor surgical procedures on arms or hands. Size accommodates both major and minor vascular or orthopedic procedures. (15 W x 32 1/2 L) Other Accessories Required: Pair of Clark Sockets (BF083) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is equivalent to that of the table. Micro-Surgical Arm and Hand Table Equipment #: BF436 Hourglass-shaped table provides stability and surgeon acess with ample working space for when performing vascular and orthopedic procedures on hands or arms. Table top is constructed of carbon fiber material allowing for imaging of the extremity and lightweight placement on the surgical table. Elbow rests reduce surgeon fatigue during lengthy procedures. Support leg for micro-surgical stability. Distal end rail enables arm and hand traction. (26 W x 34 L) Other Attachments Required: Pair of Clark Sockets (BF083) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, SurgiGraphic (with the use of a Standard Siderail Adaptor TA00012) and OrthoVision tables. NOTE: Maximum patient weight capacity is equivalent to that of the table. Accessories by Function 33

37 Head Rests Cmax Double Articulating Headrest Equipment #: BF587 This unique headrest can perform the normal functions of flexion and extension, but can also be raised to accommodate lateral patient positioning or to support a bariatric patient s head when in full reverse Trendelenburg. Table Compatibility: Cmax table Usage: Lateral positioning and supine/prone positioning NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Cmax Narrow Headrest Equipment #: BF592 This headrest is ideal for neurological procedures. The Wrist Rest (BF593) shown in photo at right attaches to the Narrow Headrest to support the surgeon s hands during long procedures. Table Compatibility: Cmax tables Usage: Neurosurgical, ophthalmic, ENT and Plastic procedures Other Accessories: Wrist rest (BF593) NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Ophthalmic Headrest Equipment #: BF154 Headrest only BF262 Headrest with Surgeon Wrist Support The Ophthalmic Headrest can be ordered with or without the Surgeon s Wrist Support (shown in the main photo at right). The headrest (shown in the smaller photo at right) fits into the table s standard headrest area or foot section and allows positioning of the patient s head when in a supine position. This headrest is mounted on a ball joint for positioning flexibility. The stainless steel u-shaped wrist support attaches to the ophthalmic headrest to provide arm support for surgeon during lengthy procedures. The wrist rest can be adjusted vertically for maximum accessibility and comfort. Other Attachments Required: Eye-ENT-Neuro Headrest Adaptor Table Compatibility: 3080, 3080-R, 3085 SP and OrthoVision tables Usage: Ophthalmic, facial trauma, and plastic procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). 34 Accessories by Function

38 Head Rests Cmax Standard Headrest Adaptor Equipment #: BF589 This specialized adaptor accommodates all standard eye-ent-neuro attachments including older MAYFIELD Systems. Table Compatibility: Cmax 3080, 3080-R, and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT and Plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Cone-Shaped Headrest Equipment #: BF215 Fits into table s standard headrest area. Provides easier access to head area for eye, ENT, plastic surgery, and neurosurgical applications. Measures 20 inches (510 mm) wide at base and angles to 4 inches (102 mm) at distal end, and is 12 inches (305 mm) long. Includes a 2-inch (51-mm) pad and a 4-inch (102-mm) pad for use with X-ray tops. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Eye, ENT, neurosurgical, and plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Eye-ENT-Neuro Headrest Adaptor Equipment #: BF185 This specialized adaptor accommodates all standard Eye-ENT-Neuro attachments including older MAYFIELD Systems. Conveniently inserts into either end of the 3080, 3080-R or 3085 SP table. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT, and plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Eye-ENT-Neuro Headrest Adaptor with 4-Inch (102-mm) Extension Equipment #: BF21 This specialized adaptor accommodates all standard Eye-ENT-Neuro attachments including older MAYFIELD Systems. Conveniently inserts into either end of the 3080, 3080-R or 3085 SP table. Includes a 4-inch (102-mm) spaldite top and pad to accommodate taller patients. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT, and plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Accessories by Function 35

39 Head Rests Frontal Sitting Attachment #1802 Equipment #: BF01 Mounts neurosurgical headrests to head or foot end of 3080, 3080-R and 3085 or to head end of Cmax tables. Ball joints allow full angular positioning of headrest. Other Attachments Required: Multi-Poise Headrest (BF038) or Horseshoe Headrest (BF036) Eye-ENT-Neuro Headrest Adaptor (BF185) when used with 3080, 3080-R and 3085 SP tables Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: For support of patient s head from behind when patient is in a seated position for temporal, parietal, and frontal surgical procedures. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Horizontal Attachment #1800 Equipment #: BF008 Mounts neurosurgical headrests to head or foot end of 3080, 3080-R and 3085 SP to head end of Cmax tables. Ball joints allow full angular positioning of headrest. Other Attachments Required: Horseshoe Headrest (BF036), Multi-Poise Headrest (BF038) or Eye-ENT-Neuro Headrest Adaptor (BF185) when used with 3080, 3080-R and 3085 SP tables. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: For supporting patient s head in supine, prone, or lateral position. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Horseshoe Headrest Equipment #: BF036 For surgical procedures involving nose, paranasal, sinuses, trachea, and larynx approaches, as well as some neurologic procedures. Other Attachments Required: Horizontal Attachment #1800 (BF008) or Frontal Sitting Attachment (BF01). Eye-ENT-Neuro Headrest Adaptor (BF185) is also required for 3080, 3080-R and 3085 SP tables Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: Cradles patient s head for eye, ENT, neuro, and plastic surgery procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Posterior Sitting Attachment #1801 Equipment #: BF011 Mounts neurosurgical headrests to table siderails. Ball joints allow lateral and vertical adjustment. Other Attachments Required: Multi-Poise Headrest (BF038) and either Clark Sockets (BF083) or Multi-Accessory Clamp (BF43) Table Compatibility: 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: For support of patient s head from the front when patient is in a seated position for suboccupital and parietal surgical procedures. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). 36 Accessories by Function

40 Head Rests Multi-Poise Headrest Equipment #: BF038 Permits posturing flexibility for neurosurgical techniques. Three sterilizable spring-laden pins assure maximum rigidity of patient s head without discomfort. Used with patient in supine, prone, lateral (park bench), or sitting position. Other Attachments Required: Horizontal Attachment #1800 (BF008), Frontal Sitting Attachment #1802 (BF01), or Posterior Sitting Attachment #1801 (BF011) and Eye-ENT-Neuro Headrest Adaptor (BF185), (except for OrthoVision) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: Neurosurgical craniotomies NOTE: Maximum patient weight capacity is 300 pounds (136 kg). AQUAGEL Contoured Head Protector Equipment #: BF463 Adult (10 x 10 x 2 ) This comfortable three-dimensional Contoured Head Protector provides stability and pressure management for supine and lateral positioning. AQUAGEL Prone Headrest Equipment #: BF464 Large (11 x 9 x 6 ) BF465 Medium (9 x 7 1/2 x 5 ) The unique molded design of the lightweight AQUAGEL Prone Headrest permits easy endotrachial tube access as well as excellent head support and stability. The positioner supports the forehead and chin and protects the eyes. Companion products include flat-bottom chest rolls (BF483 large or BF482 medium), or the prone positioner (BF485). AQUAGEL Supine Headrest Equipment #: BF466 Large (10 3/4 x 9 1/2 x 3 1/2 ) BF467 Medium (10 1/2 x 9 1/2 x 2 1/2 ) This ergonomically molded supine headrest is ideal for positioning the patient during eye surgery as well as for other procedures requiring the supine position. Accessories by Function 37

41 Leg Supports Power-lift Stirrups (Pair) Equipment #: BF453 The integral power assist mechanism in these stirrups provide excellent surgeon access and virtually effortless patient positioning of patients up to 300 pounds. The unique grip-and-twist control handles allow staff to adjust the angle of Lithotomy and degree of ab/adduction during set up and during the procedure without lifting the sterile drape. Includes rail clamps and pads. Table Compatibility: 3080, 3080-R, 3085 SP and Cmax tables Usage: Endourology, gynecology, perineal, and other mid-line access procedures. Other Related Accessories: Power-lift Stirrup Storage Cart (BF46), replacement Rail Clamps (BF642), and Reverse Trendelenburg Strap (BF455) NOTE: Maximum patient weight capacity is 300 lbs. (136 kg). Bariatric Power-lift Stirrups (Pair) Equipment #: BF454 These stirrups feature the same grip-and-twist control handles and use the same power assist technology as the standard Power-lift Stirrups (BF453), but can accommodate patients up to 800 lb (363 kg), depending on the table used. The extra large boots and pads provide comfort and security. Includes rail clamps and pads. Table Compatibility: 3080, 3080-R, 3085 SP and Cmax tables Usage: Endourology, gynecology, perineal, bariatric, colo-rectal & other mid-line access procedures. Other Related Accessories: Power-lift Stirrup Storage Cart (BF46), Bariatric Table Extensions (see page 35), replacement Rail Clamps (BF642), and Bariatric Reverse Trendelenburg Strap (BF563). NOTE: Maximum patient weight capacity is 800 lb (363 kg) for Cmax and 3085 SP, 600 lb (272 kg) for 3080-R, and 400 lb (181 kg) for 3080 tables. Split Leg Positioner Equipment #: BF351 The Split Leg Positioner includes both left and right leg supports and provides a safe system for positioning patients for laparoscopic procedures as well as lower extremity orthopedic and vascular procedures. It is radiolucent allowing both the surgeon and imaging equipment excellent access to the operative site. Patient s legs can be adducted, abducted or lowered for low Lithotomy procedures. Table Compatibility: 3080, 3080-R, 3085 SP and Cmax tables Usage: Lower extremity procedures, vascular, orthopedic, & mid-line access to abdomen Other Related Accessories (shown below): Foot Rests (Left = MTPA09, Right = MTPA10); Knee Restraint Strap (BF552) NOTE: Maximum patient weight capacity is 500 lb (227 kg) for Cmax, 3085 SP and 3080-R, and 400 lb (181 kg) for 3080 tables. Foot Rests Equipment #: MTPA09 (left), MTPA10 (right) These foot rests assist in ergonomic positioning of the patient s feet. They are especially useful when using the Split Leg Positioner. The foot rests can be attached using Clark Sockets or Multi- Accessory Clamps (sold separately). Other Attachments Required: Split Leg Positioner (BF351), Clark Sockets (BF083) or Multi- Accessory Clamps (BF43) Table Compatibility: Cmax and 3080/3085 SP tables when using the Split Leg Positioner Usage: Lower extremity procedures, vascular orthopedic and mid-line access to abdomen 38 Accessories by Function

42 Leg Supports AQUAGEL Contoured Leg Protector Equipment #: BF478 Large (20 x 7 x 1 1/2 ) The dual-density three-dimensional contoured leg protector provides ultimate pressure relief for the heel as it stabilizes the lower leg and protects the knee from hyperextension. It can be used in supine surgical procedures. Lithotomy Legholders Equipment #: BF054 Adult (Pair) BF056 Child (Pair) Provide cantilevered suspension-strap support for legs. Height and angulation are adjustable for full positioning flexibility. Other Attachments Required: Clark Sockets (BF083) or Multi-Accessory Clamps (BF43) Table Compatibility: 3080, 3080-R, 3085 SP and Cmax tables Usage: OB/GYN and urologic procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Multi-Position Legholders (Pair) Equipment #: BF433 Designed to accommodate varying positioning requirements. Boot design prevents uncontrolled abduction, even when unlocked. Telescoping knee joints provide added flexibility. Mount to table side rails. Includes one set of disposable foam insert pads (NO002). Other Attachments Required: Multi-Accessory Clamps (BF43) or Clark Sockets (BF083) Table Compatibility: 3080, 3080-R, 3085 SP and Cmax tables Usage: Gynecologic, urologic, and laparoscopic Nissen fundoplication procedures. NOTE: Maximum patient weight capacity is 500 lb (227 kg) for Cmax, 3085 SP and 3080-R, and 400 lb (181 kg) for 3080 tables. Universal Legholder (Single) Equipment #: BF266 Each Universal Legholder is contoured and padded for comfortable leg support, and is mounted on a ball joint for positioning flexibility (sold individually). Includes strap. Other Attachments Required: Clark Sockets (BF083) or Multi-Accessory Clamps (BF43) for 3080/3085 SP and Cmax tables. Traction Accessory Clamp (BF0002) for OrthoVision tables and Orthopedic Extension Table Compatibility: 3080, 3085 SP, OrthoVision, Orthopedic Extension and Cmax tables Usage: Urologic procedures and orthopedic fracture procedures Other Related Accessories: AQUALGEL Crutch Stirrup Pads (BF48) NOTE: Maximum patient weight capacity is 500 lb (227 kg) for Cmax, 3085 SP and 3080-R and 400 lb (181 kg) for Orthopedic Extension, 3080 and OrthoVision tables. Accessories by Function 39

43 Leg Supports Bariatric Foot Extension Equipment #: BF542 STERIS s Bariatric Foot Extension is 28" (711 mm) wide and easily applies to the bariatric width extensions. It adds 8" (203 mm) table length for taller patients and swings 90 degrees upward for foot support when in reverse Trendelenburg (shown). Other Attachments Required: Bariatric Table Extensions (see page 46), Siderail Locks (BF133) Table Compatibility: Cmax, 3080, 3080-R, and 3085 SP tables NOTE: Maximum patient weight capacity is equivalent to that of the table. Foot Extension with Siderail Locks Equipment #: BF2 Extends table 8" (203 mm) to accommodate taller patients and swings 90 degrees upward for foot support when patient is in reverse Trendelenburg. This full-width (20"/51 mm) extension locks to the side rails of the table foot section with Siderail Locks (pair included). Table Compatibility: Cmax, 3080, 3080-R, and 3085 SP tables NOTE: Maximum patient weight capacity is equivalent to that of the table. Culdoscopic Knee Rest Equipment #: BF066 Supports knees on lowered leg section of table. Also useful in culdoscopic and proctoscopic procedures requiring knee/chest posturing. Mounts to table siderails and includes a 2" (51 mm) thick pad. Other Attachments Required: Siderail locks (BF133) Table Compatibility: Cmax, 3080, 3080-R, and 3085 SP tables Usage: Culdoscopic and proctoscopic procedures NOTE: Maximum patient weight capacity is 500 lb (227 kg) for Cmax, 3085 SP and 3080-R, and 400 lb (181 kg) for 3080 tables. Bierhoff Knee and Foot Rest Assembly (Pair) Equipment #: BF052 Contoured to provide comfortable leg support for patient in lithotomy position. Fully adjustable so that legs can be elevated to facilitate positioning. Includes straps. Other Attachments Required: Clark Sockets (BF083) or Multi-Accessory clamps (BF43) Table Compatibility: 3080, 3080-R, and 3085 SP and Cmax tables. Usage: Perineal or combined abdominal/perineal surgical procedures, labor and delivery. NOTE: Maximum patient weight capacity is 400 lbs. (181kg). 40 Accessories by Function

44 Cmax Table Accessories Cmax Shoulder Chair Equipment #: BF594 This Shoulder Chair, used for open or arthroscopic procedures, features a unique, multi-axis head positioning capability, which allows for easy intubation and head posturing. Powered positioning of the back section inclines from 0 to 90 degrees. Removable shoulder panels provide excellent surgical access to each shoulder. Includes head restraint device. Table Compatibility: Cmax table Usage: Shoulder Arthroscopy Other Accessories: Head Restraint Straps (BF039) NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Cmax Double Articulating Headrest Equipment #: BF587 This unique headrest can perform the normal functions of flexion and extension, but can also be raised to accommodate lateral patient positioning or to support a bariatric patient s head when in full reverse Trendelenburg. Table Compatibility: Cmax table Usage: Lateral positioning and supine/prone positioning NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Cmax Standard Headrest Adaptor Equipment #: BF589 This specialized adaptor accommodates all standard eye-ent-neuro attachments including older MAYFIELD Systems. Table Compatibility: Cmax and 3080, 3080-R, 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT and Plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Table-specific Accessories 41

45 Cmax Table Accessories Cmax Narrow Headrest and Cmax Surgeon Wrist Rest Equipment #: BF592 Cmax Narrow Headrest BF593 Cmax Surgeon Wrist Rest The Narrow Headrest is ideal for neurological procedures. The Wrist Rest (BF593) shown in photo may be ordered separately to support the surgeon s hands during long procedures. Table Compatibility: Cmax table Usage: Neurosurgical, ophthalmic, ENT and plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Cmax Uro/Endo Extension Equipment #: BF575 This lightweight 18 (457 mm) long carbon fiber extension provides additional fluoro imaging length assuring uninterrupted imaging of Kidney, Ureter and Bladder (KUB) anatomy of tall patients (6' 2" model shown). It easily attaches to the side rails of Cmax table s seat section once the leg section is removed, and includes standard side rails for applying leg holders, Fluid Collector System, and arm supports. An integral sub X-ray cassette channel also allows imaging with flat cassettes. Other Accessories: Patient Transfer Board with 2" pad (BF204) Table Compatibility: Cmax tables NOTE: Maximum patient weight capacity is 800 lb (363 kg) with the table top centered, and 400 lb (181 kg) with the table top slid fully toward patient s feet. 42 Table-specific Accessories

46 SurgiGraphic Table Accessories Patient Safety Straps (Pair) Equipment #: TA00001 Radiolucent strap wraps around patient and tabletop. Fits all size patients with Velcro securement. Table Compatibility: SurgiGraphic 6000 and 1027 tables NOTE: Maximum patient weight capacity is equivalent to that of the table. Catheter Extension Equipment #: TA00002 Attaches to foot end of table and moves with the table top during float, serving as a convenient sterile instrument surface. Table Compatibility: SurgiGraphic 6000 table Usage: Endovascular Surgery NOTE: Not a patient support. Radial AV Fistula Board Equipment #: TA00003 This larger imagable platform is ideal for fistula repair with an uninterrupted fluoro scan for post operative flow studies from radial AV fistula to vena cava. (Includes pad & pair of Side Rail Locks). Table Compatibility: SurgiGraphic 6000 and 1027 tables Usage: AV Fistula procedures NOTE: Maximum patient weight capacity is equivalent to that of the table. Table Controls - SurgiGraphic 1027 and 6000 Tables SurgiGraphic Hand Control, Foot Control and Palm Control are available on page 24. Table-specific Accessories 43

47 SurgiGraphic Table Accessories Standard Siderail Adaptor (one) Equipment #: TA00012 Provides attachment of accessories requiring standard siderails. Moveable and removable anywhere along side of table. Table Compatibility: SurgiGraphic 6000 and 1027 tables Standard Siderail Adaptor (set of three) Equipment #: TA00005 Provides attachment of accessories requiring standard siderails. Moveable and removable anywhere along side of table. Table Compatibility: SurgiGraphic 6000 and 1027 tables Carbon Fiber Extension with Pad Equipment #: TA00006 Provides additional 12 inches (305 mm) to increase normal 71-inch (1803-mm) fluoro body scan to 83-inch (2108-mm) uninterrupted imaging coverage. Table Compatibility: SurgiGraphic 6000 table NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Side Rail Extender Equipment #: BF456 The Side Rail Extender extends the side rail of the SurgiGraphic 6000 table to allow for positioning of an armboard when the Carbon Extension (also pictured above) is attached. This extender attaches to a standard side rail (or on the Standard Siderail Adaptor, as shown at right), and can be used on most surgical tables. Other Attachments Required: Standard Siderail Adaptor (TA00012) Table Compatibility: SurgiGraphic 1027 and 6000, 3080/3085, OrthoVision and Cmax tables. Other Related Accessories: Carbon Fiber Head Extension (TA00006) 44 Table-specific Accessories

48 Anesthesia Universal Ether Screen with Clark Socket Equipment #: BF074 Supports surgical drape and is mounted on a ball joint for positioning flexibility (parallel or perpendicular to patient body as the case dictates). Screen is height adjustable and locks or releases with a half-turn of control knob. Includes Clark Socket for mounting to table siderail. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables. SurgiGraphic tables with use of Standard Siderail Adaptor. Winged Ether Screen #1401 Equipment #: BF075 Features two extension arms to support surgical drapes. Control knob for each extension arm allows height and lateral adjustments. Each extension is independently height adjustable and locks or releases with a half-turn of control knob. Includes mounting sockets. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables. Transducer Holder Equipment #: BF263 Provides a rigid, stable post for securing a transducer at the appropriate height for neuro and cardiac surgery. Curved design makes it easy for anesthesiologist to position and view the transducer. Other Attachments Required: Clark Sockets (BF083) or Multi-Accessory Clamps (BF43) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables; SurgiGraphic tables with use of Standard Siderail Adaptor Usage: Intravascular and/or cerebral procedures requiring monitoring Accessories by Procedure 45

49 Bariatric Accessories Bariatric Table Extensions (Cmax table) Equipment #: No pads 2 pads 4 pads BF661 BF643 BF644 Full set of eight BF662 BF645 BF646 Set of four; two Back and two Seat Section BF663 BF647 BF648 Set of two; Head Section BF664 BF649 BF651 Set of two; Leg Section BF652 BF653 PADS ONLY full set of eight BF654 BF655 PADS ONLY set of four; two Back, two Seat Section BF656 BF657 PADS ONLY set of two; Head Section BF658 BF659 PADS ONLY set of two; Leg Section These radiolucent modular extensions increase the width of your Cmax table to a full 28" to accommodate bariatric patients. Order either the width extender and the pad together (BF643- BF651) or order pads only (BF652-BF659, refer to page 17) to change the height of your existing pad/extension set. Table Compatibility: Cmax tables Usage: Bariatric or obstetric surgical procedures Other Related Accessories: Bariatric Accessory Storage Cart (BF551) NOTE: Maximum patient weight capacity is equivalent to that of the table. Bariatric Table Extensions (3080/3085 tables) Equipment #: BF541 Complete Set of 8 BF553 Set of 4; two Seat and two Back section BF554 Set of 2; Head section BF555 Set of 2; Foot section Modular extensions increase the width of your table to 28" to accommodate bariatric patients. These width extensions include 2" (51 mm) tall pads and attach easily to the head, back, seat, and foot section and allow full table articulation. The integral side rails facilitate the attachment of other accessories. These accessories can be conveniently stored on the Bariatric Accessory Cart (BF551). Table Compatibility: 3080, 3080-R and 3085 SP table Usage: Bariatric or obstetric surgical procedures Other Related Accessories: Bariatric Accessory Cart (BF551), Bariatric Width Extender Pads for X-Ray top (see below), Bariatric Foot Extension (BF542) NOTE: Maximum patient weight capacity is equivalent to that of the table. Bariatric Width Extender Pads for X-ray Top (3080/3085) Equipment #: BF556 PADS ONLY Complete Set of 8 BF557 PADS ONLY Set of 4; two Seat and two Back section BF558 PADS ONLY Set of 2; Head section BF559 PADS ONLY Set of 2; Foot section These extra-tall 4" (102 mm) pads are applied to the Bariatric Width Extensions (listed above) to create a level table surface when the X-ray tops (BF202) have been installed. The Back Section pads feature a quick-release Velcro attachment, designed for easy removal to permit the insertion of film cassettes into the x-ray top. Other Attachments Required: Bariatric Table Extensions (see above) Table Compatibility: 3080, 3080-R and 3085 SP table Usage: Bariatric surgical procedures Other Related Accessories: Bariatric Accessory Cart (BF551), Bariatric Foot Extension (BF542) 46 Accessories by Procedure

50 Bariatric Accessories Bariatric Accessory Storage Cart Equipment #: BF551 This cart is a compact storage and transport device for the full range of STERIS s bariatric accessories. The eight side rails were specifically designed to accommodate each of the unique Bariatric Width Extensions. The two back rails easily hold the Split Leg Positioner or other leg holder accessories. Other accessories may be attached to interior rails or stored in the deep bin / weighted base. Bariatric Foot Extension Equipment #: BF542 STERIS s Bariatric Foot Extension easily applies to the bariatric width extensions. It adds 8 inches (203 mm) of table length for taller patients and swings 90 degrees upward for foot support when in reverse Trendelenburg (shown). Other Attachments Required: Bariatric Width Extensions (see page 43), Side Rail Locks (pair) (BF133) Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables NOTE: Maximum patient weight capacity is equivalent to that of the table. Bariatric Power-lift Stirrups (Pair) Equipment #: BF454 The integral power assist mechanism in these stirrups provide virtually effortless patient positioning of patients up to 800 lb (363 kg). The unique grip-and-twist control handles allow staff to adjust the angle of Lithotomy (and degree of ab/ adduction) before the procedure (during set up) and during the procedure (without lifting the sterile drape). The extra large boots and boots pads provide comfort and security. Includes Rail Clamps and pads. Table Compatibility: Cmax, R and 3085 SP tables Usage: Endourology, gynecology, perineal, bariatric and other mid-line access procedures. Other Related Accessories: Power-lift Stirrup storage cart (BF46), Bariatric Reverse Trendelenburg Strap (BF563) NOTE: Maximum patient weight capacity is 800 lb (363 kg) for Cmax and 3085 SP, 600 lb (272 kg) for 3080-R, and 400 lb (181 kg) for 3080 tables. Bariatric Reverse Trendelenburg Strap (Pair) Equipment #: BF563 The broad pads on these straps safely encircle the inner thigh without binding or pinching, making them ideal for Nissen Fundoplication or other extreme Reverse Trendelenburg procedures. The safety belt buckle ensures a snug fit for patients up to 800 lb (363 kg). These straps attach easily and securely to the table with integral rail clamps (included). Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: Bariatric surgical procedures Other Related Accessories: Bariatric Power-lift Stirrups (BF454) NOTE: Maximum patient weight capacity is 800 pounds (363 kg). Accessories by Procedure 47

51 Bariatric Accessories Split Leg Positioner Equipment #: BF351 The Split Leg Positioner includes both left and right leg supports and provides a safe system for positioning patients for laparoscopic procedures as well as lower extremity orthopedic and vascular procedures. It is radiolucent allowing both the surgeon and imaging equipment excellent access to the operative site. Patient s legs can be adducted, abducted, or lowered for low Lithotomy procedures. Table Compatibility: 3080, 3080-R, 3085 SP and Cmax tables Usage: Lower extremity procedures, vascular, orthopedic, & mid-line access to abdomen Other Related Accessories (shown at right): Foot Rests (Left = MTPA09, Right = MTPA10); Knee Restraint Strap (BF552) NOTE: Maximum patient weight capacity is 500 lb (227 kg) for Cmax, 3085 SP and 3080-R, and 400 lb (181 kg) for 3080 tables. Knee Restraint Strap (Pair) Equipment #: BF552 The broad pads on these straps safely prevent the knee from flexing during surgery and feature a full-length Velcro closure for a snug fit. Used in conjunction with the Split Leg Positioner, they are ideal for laparoscopic, colo-rectal, vascular, and extreme Reverse Trendelenburg procedures. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: Laparoscopic, colo-rectal, vascular, and extreme Reverse Trendelenburg procedures Other Recommended Accessories: Split Leg Positioner (BF351) NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Bariatric Fluid Collection System Equipment #: BF56 The Bariatric Fluid Collection System includes adapters so the drape support can be attached to the Bariatric Width Extensions. It is ideal for use in cystoscopic or hysteroscopic procedures, and comes with the flexible drape support (pictured) and a fluid collection bag (shown on page 64). The flexible drape support device quickly attaches to the end of the table seat section during set up, and is easily manipulated intra-procedurally to obtain maximum unobstructed surgical site access. Both the Sterile and Non-sterile Fluid Collector Bags fit either the standard or Bariatric model drape support. The built-in flexible drain hose works with a kick bucket or a suction cannister. Table Compatibility: Cmax, 3080, 3080-R, and 3085 SP tables Usage: Urologic, cystoscopic, or hysteroscopic procedures Other Recommended Accessories: Set of 10 Fluid Collection Bags: Sterile (BF458) or Nonsterile (BF459) 48 Accessories by Procedure

52 Neurosurgical Accessories Morgan Pelvic Rest Equipment #: BF135 Supports patient in knee-chest position, with knees on extended foot section. Adjustable lateral patient support mounts to table siderails. Includes a 4-inch (102- mm) thick pad with cutout, two padded supports, and an extended foot section with pad. Other Attachments Required: Restraint Strap (BF088), Siderail Locks (BF133), and Multi-Accessory Clamps (BF43) or Clark Sockets (BF083) Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: Spinal and laminectomy procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Andrews Frame Adaptor Kit Equipment #: BF305 Adapts 3080, 3080-R and 3085 table to accommodate older Andrews Frame models supplied by OSI. An adaptor is not required for newer Andrews Frame models. Check OSI model for compatibility. Includes siderail extenders, six flat head screws, and a new leg section with spaldite top. Andrews Frames/Amsco Table Compatibility Andrews Frame Model #914 - Table Compatibility: 1080 and 2080 tables. Compatible with 3080, 3080-R and 3085 with adapter kit Andrews Frame Model #916 - Table Compatibility: 3080, 3080-R and 3085 tables Andrews Frame Model #919 - Table Compatibility: 2080 IA tables Usage: Neurologic procedures involving spinal surgery NOTE: Maximum patient weight capacity is 400 pounds (181 kg). This weight capacity does not apply to the Andrews Frame, which is not supplied by STERIS. Cmax Standard Headrest Adaptor Equipment #: BF589 This specialized adaptor accommodates all standard eye-ent-neuro attachments including older MAYFIELD Systems. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT and Plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Accessories by Procedure 49

53 Neurosurgical Accessories Horizontal Attachment #1800 Equipment #: BF008 Mounts neurosurgical headrests to head or foot end of 3080, 3080-R and 3085 SP tables. Ball joints allow full angular positioning of headrest. Other Attachments Required: Horseshoe Headrest (BF036), Multi-Poise Headrest (BF038) or Eye-ENT-Neuro Headrest Adaptor (BF185) when used with 3080, R and 3085 SP tables. Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: For supporting patient s head in supine, prone, or lateral position. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Posterior Sitting Attachment #1801 Equipment #: BF011 Mounts neurosurgical headrests to siderails of back section of table. Ball joints allow lateral and vertical adjustment. Other Attachments Required: Multi-Poise Headrest (BF038) and either Clark Sockets (BF083) or Multi-Accessory Clamps (BF43) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: For support of patient s head from the front when patient is in a seated position for suboccupital and parietal surgical procedures. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Frontal Sitting Attachment #1802 Equipment #: BF01 Mounts neurosurgical headrests to head or foot end of 3080, 3080-R and 3085 tables. Ball joints allow full angular positioning of headrest. Other Attachments Required: Multi-Poise Headrest (BF038) or Horseshoe Headrest (BF036) Eye-ENT-Neuro Headrest Adaptor (BF185) when used with 3080, 3080-R and 3085 SP tables Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: For support of patient s head from behind when patient is in a seated position for temporal, parietal, and frontal surgical procedures. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). 50 Accessories by Procedure

54 Neurological Accessories Multi-Poise Headrest Equipment #: BF038 Permits posturing flexibility for neurosurgical techniques. Three sterilizable spring-laden pins assure maximum rigidity of patient s head without discomfort. Used with patient in supine, prone, lateral (park bench), or sitting position. Other Attachments Required: Horizontal Attachment #1800 (BF008), Frontal Sitting Attachment #1802 (BF01), or Posterior Sitting Attachment #1801 (BF011) and Eye-ENT-Neuro Headrest Adaptor (BF185) (except for OrthoVision). Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: Neurosurgical craniotomies in supine, prone, lateral, and/or sitting posterior positions. NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Horseshoe Headrest Equipment #: BF036 For surgical procedures involving nose, paranasal, sinuses, trachea, and larynx approaches, as well as some neurologic procedures. Other Attachments Required: Horizontal Attachment #1800 (BF008) or Frontal Sitting Attachment (BF01). Eye-ENT-Neuro Headrest Adaptor (BF185) is also required for 3080, 3080-R and 3085 SP tables Table Compatibility: Cmax, 3080, 3080-R, 3085 SP, and OrthoVision tables Usage: Cradles patient s head for eye, ENT, neuro, and plastic surgery procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Neuro Seat Plate Equipment #: BF208 Extends leg section seat length and provides approximately a 90-degree seating angle for reversed chair posture. Positioned under pad by hooking seat plate support legs onto siderail supports and allowing plate to rest on top of raised kidney elevator. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Neurosurgical procedures with patient in a seated position NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Procedure 51

55 Ophthalmology/ENT/Plastic Headrest Accessories Cmax Double Articulating Headrest Equipment #: BF587 This unique headrest can perform the normal functions of flexion and extension, but can also be raised to accommodate lateral patient positioning or to support a bariatric patient s head when in full reverse Trendelenburg. Table Compatibility: Cmax table Usage: Lateral positioning and supine/prone positioning NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Cmax Standard Headrest Adaptor Equipment #: BF589 This adaptor accommodates all standard eye-ent-neuro attachments including older MAYFIELD Systems. Table Compatibility: Cmax 3080, 3080-R, and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT and Plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Eye-ENT-Neuro Headrest Adaptor Equipment #: BF185 This specialized adaptor accommodates all standard Eye-ENT-Neuro attachments including older MAYFIELD Systems. Conveniently inserts into either end of the 3080, 3080-R or 3085 SP table. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT, and plastic procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Eye-ENT-Neuro Headrest Adaptor with 4-Inch (102-mm) Extension Equipment #: BF21 This specialized adaptor accommodates all standard Eye-ENT-Neuro attachments including older MAYFIELD Systems. Conveniently inserts into either end of the 3080, 3080-R or 3085 SP table. Includes a 4" (102 mm) spaldite top and pad to accommodate taller patients. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Neurosurgical, ophthalmic, ENT, and plastic procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). 52 Accessories by Procedure

56 Ophthalmology/ENT/Plastic Headrest Accessories Cmax Narrow Headrest and Cmax Surgeon Wrist Rest Equipment #: BF592 Cmax Narrow Headrest BF593 Cmax Surgeon Wrist Rest The Narrow Headrest is ideal for neurological procedures. The Wrist Rest (BF593) shown in photo may be ordered separately to support the surgeon s hands during long procedures. Table Compatibility: Cmax table Usage: Neurosurgical, ophthalmic, ENT and plastic procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Ophthalmic Headrest Equipment #: BF154 Headrest only BF262 Headrest with Surgeon Wrist Support The Ophthalmic Headrest can be ordered with or without the Surgeon s Wrist Support (shown in the main photo at right). The headrest (shown in the smaller photo at right) fits into the table s standard headrest area or foot section and allows positioning of the patient s head when in a supine position. This headrest is mounted on a ball joint for positioning flexibility. The stainless steel u-shaped wrist support attaches to the ophthalmic headrest to provide arm support for surgeon during lengthy procedures. The wrist rest can be adjusted vertically for maximum accessibility and comfort. Other Attachments Required: Eye-ENT-Neuro Headrest Adaptor (BF185) Table Compatibility: Cmax, 3080, 3080-R, 3085 SP and OrthoVision tables Usage: Ophthalmic, facial trauma, and plastic procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Cone-Shaped Headrest Equipment #: BF215 Fits into table s standard headrest area. Provides easier access to head area for eye, ENT, plastic surgery, and neurosurgical applications. Measures 20" (510 mm) wide at base and angles to 4" (102 mm) at distal end, and is 12" (305 mm) long. Includes a 2" (51 mm) pad and a 4" (102 mm) pad for use with X-ray tops. Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Eye, ENT, neurosurgical, and plastic procedures NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Procedure 53

57 Orthopedics Cmax Shoulder Chair Equipment #: BF594 This Shoulder Chair, used for open or arthroscopic procedures, features a unique, multi-axis head positioning capability, which allows for easy intubation and head posturing. Powered positioning of the back section inclines from 0 to 90 degrees. Removable shoulder panels provide excellent surgical access to each shoulder. Includes head restraint device. (See page 5 for accessory package). Table Compatibility: Cmax table Usage: Shoulder Arthroscopy Other Accessories: Head Restraint Straps (BF039), Shoulder Table Accessory Cart (BF461) NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Head Restraint Straps Equipment #: BF039 These single-use straps provide chin and head restraint when used with the Cmax Shoulder Chair (BF594). Each box includes 12 head straps and 12 chin straps. Table Compatibility: Cmax Shoulder Chair (BF594) Usage: Shoulder Arthroscopy NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Shoulder Beach Chair Equipment #: BF561 The integral power assist mechanism and floating head support design of the Beach Chair make it easy and safe for the nursing staff to take the patient from a supine position and posture them for either an open or arthroscopic shoulder procedure. The handles on either side of the Beach Chair facilitate easy attachment and removal, and the side panels can be removed for either a right or left shoulder procedure. Table Compatibility: 3080, 3080-R and 3085 SP tables Other Accessories: Shoulder Table Accessory Cart (BF461), Lateral Safety Strap (BF562) NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Shoulder Table Equipment #: BF437 Used for arthroscopic or open shoulder surgery. Powered positioning of back section inclines from 0 degrees to 90 degrees. Removable shoulder panels provide an 8-inch (203-mm) access area behind each shoulder. (See page 7 for accessory package). Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Arthroscopic or open shoulder procedures Other Accessories: Shoulder Table Accessory Cart (BF461), Shoulder Table Chin Cups (BF452) NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Shoulder Table Chin Cups Equipment #: BF452 These single-use chin cups are used in conjunction with the Shoulder Table and provide stability for the head and chin during shoulder procedures. Each box contains 10 chin cups. Table Compatibility: Shoulder Table (BF437) Usage: Arthroscopic or open shoulder procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). 54 Accessories by Procedure

58 Orthopedics Shoulder Table Instructional Wall Chart Equipment #: BF353 Provides a convenient quick reference set up guide for patient positioning using the Amsco Orthopedic Shoulder Table (BF437). (This chart is not a substitute for reading and understanding the Shoulder Table Operator Manual Part# P ). Cmax/3085 SP/3080 Orthopedic Extension Accessory Package Equipment #: BF806 A Cmax/3080/3085 SP Orthopedic Extension serves as a mobile, radiolucent orthopedic platform. The carbon fiber abductor bars rest on elevated platforms on the cart at the perfect height to attach to the table - just wheel the cart into place. When not in use, accessories can be removed and stored in cart. Includes abductor bar assembly, wedge-shaped sacral rest with pad (adult), perineal post with pad (adult), TenZor Carbon Fiber traction unit assembly with boots (qty. 2), patient transfer board with 4-inch (102-mm) pad, L-shaped traction extensions (qty. 2), traction accessory clamp (qty. 2), anesthesia armboard with 2-inch (51-mm) pad, universal legholder, multiposture armboard with 2-inch (51-mm) pad, Clark Socket, accessory cart, and set-up procedure guide. Table Compatibility: Cmax, 3080, 3080-R and 3085 SP tables NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Set-up guide for Orthopedic Extension Equipment #: P This set-up guide provides detailed instructions on how to position the patient for each procedure, as well as a list of the accessories required to do so. Patient Transfer Board with 4-Inch (102-mm) Pad Cmax/3085 SP/3080 Tables with Orthopedic Extension Equipment #: BF214 Supports patient s legs during transfer to table. Recommended for leg support only. Includes a 4-inch (102-mm) removable foam pad. Pad attaches to transfer board with Velcro * strips. Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Procedure 55

59 Orthopedics Orthopedic IA Board with 2-Inch (51-mm) Pad Equipment #: BF00025 For supine, prone, and lateral procedures using C-arm imaging. Fits into two access holes under sacral rest. Allows table to be used for general surgical procedures that do not need flex or reflex table positioning, or a kidney elevator. Patient can be postured in reverse orientation for upper body imaging. Table Compatibility: OrthoVision tables Usage: Pacemaker placement, myelograms, spinal screws, and vascular access procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Patient Transfer Board with 2-Inch (51-mm) Pad OrthoVision Equipment #: BF213 Lightweight, duotone-covered, aluminum frame supports patient s legs during transfer to and from table. Recommended for leg support only. Fits into access holes in sacral area of OrthoVision tables. Table Compatibility: OrthoVision tables NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Hip Spica Assembly Adult Equipment #: BF00031 Elevated sacral rest provides added height for casting in sacrolumbar area. Includes elevated back board, elevated sacral rest, body slat, and perineal post. Other Attachments Required: Siderail Locks (BF133) Table Compatibility: OrthoVision tables. It can be customized through SSQ process to fit Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension Usage: Body casting procedures NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Hip Spica Assembly Child Equipment #: BF00038 Elevated sacral rest provides added height for casting in sacrolumbar area. Includes elevated back board - 22 inches (L) x 20 inches (W) (559 mm x 508 mm), elevated sacral rest - 6 inches (L) x 4 inches (W) (152 mm x 102 mm), body slat - 20 inches (L) x 2 inches (W) (508 mm x 51 mm), 2-inch (51-mm) pad (not shown). Other Attachments: Siderail Locks (BF133) Table Compatibility: OrthoVision tables. It can be customized through SSQ process to fit Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension Usage: Body casting procedures NOTE: Maximum patient weight capacity is 400 pounds (181 kg). 56 Accessories by Procedure

60 Orthopedics Weinberger Hand Traction Apparatus Equipment #: BF006 Ideal for closed reduction and prepping of upper extremities. Locks slide down to hold digits securely. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Upper arm procedures NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Straight Traction Extension Equipment #: BF268 Used to adjust the level of the traction unit assembly and the patient s leg relative to the abductor bars. As pictured here, extension is in a position that lowers the patient s leg relative to the abductor bar for tibia nailing. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) and Traction Assembly Clamp (BF0002) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Lower extremity fractures NOTE: Maximum patient weight capacity is 400 pounds (181 kg). L-Shaped Traction Extension Equipment #: BF0003 Holds the Traction Unit Assembly to provide greater positioning flexibility. For example, it can be used to provide additional length or greater abduction during orthopedic procedures. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) and Traction Assembly Clamp (BF0002) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Orthopedic fractures NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Procedure 57

61 Orthopedics TenZor Carbon Fiber Traction Unit Assembly Equipment #: BF72 This lightweight carbon fiber assembly attaches to the abductor bars of orthopedic tables by means of a traction accessory clamp to hold foot traction boot (included) in place to pull traction. The tension-adjusting handle at the distal end allows precise adjustment of traction being pulled, and easy-to-read numbers inform amount of torque being used. It also holds traction bow/block; traction block, skeletal; and Weinberger hand traction apparatus. Other Attachments Required: Traction-Accessory Clamp (BF0002) and if needed Foot Traction Boots Child BF723 or Obese Adult BF722 Table Compatibility: Cmax/3085 SP/3080 OrthoExtension and OrthoVision Tables Usage: Orthopedic traction NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Foot Traction Boots Equipment #: BF721 Adult (pair) BF722 Obese adult (pair) BF723 Child (pair) The Traction Boots, which easily attach to the Traction Unit Assembly (BF72) with a quick connect coupling, are ergonomically designed for comfort. The carbon fiber construction of the boots allows imaging of the ankle and anterior portion of the foot. Child-sized boots are adjustable to accommodate sizes from pre-adolescents to smaller adults. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) and Traction Assembly Clamp (BF0002) 2 each Table Compatibility: Cmax, 3085 SP, 3080 OrthoExtension and OrthoVision Tables Other Related Accessories: AQUAGEL Orthopedic Boot Pad (BF727) NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Traction Block, Skeletal Equipment #: BF725 Inserts into traction unit assembly to allow use of Steinman or Kirschner bows for skeletal traction. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) and Traction Accessory Clamp (BF0002) Table Compatibility: Cmax/3085 SP/3080 OrthoExtension and OrthoVision Tables Usage: Orthopedic fractures with skeletal traction NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Traction Bow/Block, Skeletal Equipment #: BF724 This carbon fiber device inserts into traction unit assembly for skeletal traction when performing procedures in supine or lateral positions. The flexibility of bow permits use with patients of various sizes. The Carbon Fiber Traction Bow/Block allows for more precise and stable positioning of fracture and is radiolucent. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) and Traction Accessory Clamp (BF0002) Table Compatibility: Cmax/3085 SP/3080 OrthoExtension and OrthoVision Tables Usage: Orthopedic fractures with skeletal traction NOTE: Maximum patient weight capacity is 400 pounds (181 kg). 58 Accessories by Procedure

62 Orthopedics Traction Unit Assembly (old style) Equipment #: BF0006 Attaches to abductor bars of orthopedic tables by means of a traction accessory clamp to hold traction boots in place to pull traction. Also holds traction bow/block; traction block, skeletal; and Weinberger hand traction apparatus. Other Attachments Required: Traction-Accessory Clamp (BF0002) and Foot Traction Boots Adult (BF00023), Child (BF00032), or Obese Adult (BF0008) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension, and OrthoVision tables Usage: Orthopedic traction NOTE: Patient weight limitation is 400 pounds (181 kg) Foot Traction Boots (old style) Equipment #: BF00023 Adult (Pair) BF0008 Obese Adult (Pair) BF00032 Child (Pair) Made of flexible material with foam inserts that secure to patient s feet with Velcro straps, these boots slide onto foot plate of Traction Unit Assembly. Child-sized boots are adjustable to accommodate sizes from pre-adolescents to smaller adults. Other Attachments Required: Traction Unit Assembly (BF0006) and Traction Assembly Clamp (BF0002) - 2 each Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension, and OrthoVision tables Usage: Orthopedic fractures and hip spica NOTE: Patient weight limitation is 400 pounds (181 kg) Traction Block, Skeletal (old style) Equipment #: BF00028 Inserts into traction unit assembly to allow use of Steinman or Kirschner bows for skeletal traction. Other Attachments Required: Traction Unit Assembly (BF0006) and Traction Accessory Clamp (BF0002) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension, and OrthoVision tables Usage: Orthopedic fractures NOTE: Patient weight limitation is 400 pounds (181 kg) Traction Bow/Block (old style) Equipment #: BF371 Inserts into traction unit assembly for skeletal traction when performing procedures in supine or lateral positions. Flexibility of bow permits use with patients of various sizes. Fits into traction unit assembly at foot plate slot, allowing for more precise and stable positioning of fracture. Other Attachments Required: Traction Unit Assembly (BF0006) and Traction Accessory Clamp (BF0002) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension, and OrthoVision tables Usage: Orthopedic fractures NOTE: Patient weight limitation is 400 pounds (181 kg) Accessories by Procedure 59

63 Orthopedics Traction Accessory Clamp Equipment #: BF0002 Attaches to abductor bars of tables. Can be attached to either side of table for mounting accessories. Table Compatibility: Cmax, 3085 SP, 3080 OrthoExtension and OrthoVision Tables NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Carbon Fiber Tibia/Lateral Countertraction Support Equipment #: BF00062 This radiolucent support provides comfortable support of the upper leg in a lateral position, as well as countertraction support for intramedullary and tibia nailing procedures. When repositioned, it also serves as a popliteal support device. It features a padded J-bar, a perineal post support, and a pivot arm (perineal post not included). Other Attachments Required: Traction Accessory Clamp (BF0002), Perineal Post (BF00065) Table Compatibility: Cmax/3085 SP/3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Femoral intramedullary and tibia nailing procedures, and lateral positioning. NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Arthroscopy Knee Holder Equipment #: BF717 The Arthroscopy Knee Holder attaches to the seat section of the table with a Clark Socket (not included) and is typically used for the off the end of the table arthroscopy technique. The diameter of the knee holder is adjustable to fit any size patient, and the rotation of the knee holder can be adjusted as surgical needs dictate. A three piece cushion set is included. Other Attachments Required: Clark Socket (BF083) or Multi-Accessory Clamp (BF43) Table Compatibility: Cmax, 3085 SP, 3080-R, and 3080 tables. Usage: Knee Arthroscopy procedures NOTE: Maximum patient weight capacity is 26.5 pounds (12 kg). Universal Legholder (single) Equipment #: BF266 Each Universal Legholder is contoured and padded for comfortable leg support, and is mounted on a ball joint for positioning flexibility (sold individually). Includes strap. Other Attachments Required: Clark Sockets (BF083) or Multi-Accessory clamps (BF43) for Cmax, 3080, 3080-R and 3085 SP tables. Traction-Accessory Clamp (BF0002) for OrthoVision tables, Orthopedic Extension Table Compatibility: Cmax, 3085 SP, 3080-R, 3080 and OrthoVision tables Usage: Orthopedic fracture procedures to support patient s unaffected leg NOTE: Maximum patient weight capacity is 500 lb (227 kg) for Cmax, 3085 SP and 3080-R and 400 lb (181 kg) for Orthopedic Extension, 3080 and OrthoVision tables. 60 Accessories by Procedure

64 Orthopedics Carbon Fiber T-Shaped Sacral Rest with Pad Equipment #: BF00073 Attaches to orthopedic table to support the patient s sacral area. Maximum width measures 13 inches (330 mm). Other Attachments Required: Perineal Post with Pad Adult (BF00065) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Obese patients and pelvic fractures. NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Carbon Fiber Wedge-Shaped Sacral Rest with Pad Adult Equipment #: BF00066 Attaches to orthopedic table to support the patient s sacral area. Other Attachments Required: Perineal Post with Pad Adult (BF00065) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Hip fractures and other orthopedic procedures in the supine position NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Wedge-Shaped Sacral Rest with Pad Child Equipment #: BF00048 Attaches to orthopedic table to support the patient s sacral area. Maximum width measures approximately 4 inches (102 mm). Other Attachments Required: Perineal Post Child (BF41), Perineal Post Pad - Disposable (NO001) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Hip fractures and other orthopedic procedures in the supine position NOTE: Maximum patient weight capacity is 150 pounds (68 kg). Carbon Fiber Hip Rest with Pad Equipment #: BF00072 Attaches to sacral area of table for support of patient s hip in lateral position. Total carbon composite. Includes 2-inch pad for pressure management. Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Lower extremity orthopedic procedures in lateral position NOTE: Maximum patient weight capacity is 400 pounds (181). Accessories by Procedure 61

65 Orthopedics Perineal Post with Pad Adult Equipment #: BF00065 Post provides countertraction and is made of radiolucent carbon fiber to enhance C-arm imaging. Post pad relieves pressure on the perineal area and is made of disposable foam. Other Attachments Required: Wedge-shaped Sacral Rest Adult (BF00066) or T-shaped Sacral Rest (BF00073) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 with Orthopedic Extension and OrthoVision tables Usage: Orthopedic procedures in the supine position Perineal Post without Pad Child Equipment #: BF41 Provides countertraction, and is used in supine positions with a sacral rest. Measures approximately 7 inches (178 mm) including the insert. Other Attachments Required: Wedge-shaped Sacral Rest Child (BF00048), Perineal Post Pad - Disposable (NO001) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 with Orthopedic Extension and OrthoVision tables Usage: Orthopedic procedures in the supine position Perineal Post Pad Disposable Equipment #: NO001 Relieves pressure from the perineal area. Fits standard perineal posts and can be trimmed to fit child perineal posts. Made of disposable foam. Case of 10. Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 with Orthopedic Extension and OrthoVision tables Usage: Orthopedic procedures in the supine position Surgical Drape Support Equipment #: BF00018 Consists of two flat drape-support bars supported on round, angled, stainless steel bars that attach to the head and foot end of the table. Abductor bars support the patient s isolation drape, serving as a barrier. Sterile field can be maintained if table is raised and/or lowered during the surgical procedure. Flat drape-support bars can be positioned in a V shape to enhance C-arm imaging. Clark socket and traction accessory clamp included. Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables 62 Accessories by Procedure

66 Pediatrics Infant Table Attachment Equipment #: BF inch wide x 30-inch long (305-mm x 762-mm) platform mounts securely to end of back/seat section to improve surgical access to infant patients. Siderails facilitate armboard attachment. Two-inch (51 mm) pad included. Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables NOTE: Maximum patient weight capacity is 50 pounds (23 kg). Lithotomy Legholders Child (Pair) Equipment #: BF056 Provide cantilevered suspension-strap support for legs. Height and angulation are adjustable for full positioning flexibility. Other Attachments Required: Clark Sockets (BF083) or Multi-Accessory Clamps (BF43) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables Usage: Urologic procedures NOTE: Maximum patient weight capacity is 50 pounds (23 kg). Hip Spica Assembly - Child Equipment #: BF00038 Elevated sacral rest provides added height for casting in sacrolumbar area. Includes elevated back board - 22" L x 20" W (559 x 508 mm), elevated sacral rest - 6" L x 4" W (152 x 102 mm), body slat - 20" L x 2" W (508 x 51 mm), 2" (51 mm) pad (not shown). Other Attachments: Siderail Locks (BF133) Table Compatibility: OrthoVision tables. It can be customized through SSQ process to fit Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension Usage: Body casting procedures NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Procedure 63

67 Pediatrics Foot Traction Boots - Child (Pair) Equipment #: BF723 Made of flexible material with foam inserts that secure to patient s feet with Velcro straps. Allow exposure of ankle and anterior portion of foot. Slide onto foot plate of Traction Unit Assembly. Adjustable to accommodate sizes from pre-adolescents to smaller adults. Other Attachments Required: TenZor Carbon Fiber Traction Unit Assembly (BF72) and Traction Assembly Clamp (BF0002) - 2 tables Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension, and OrthoVision tables Usage: Orthopedic fractures and hip spica NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Foot Traction Boots (old style) Equipment #: BF00032 Child (Pair) Made of flexible material with foam inserts that secure to patient s feet with Velcro straps, these boots slide onto foot plate of Traction Unit Assembly. Child-sized boots are adjustable to accommodate sizes from pre-adolescents to smaller adults. Other Attachments Required: Traction Unit Assembly (BF0006) and Traction Assembly Clamp (BF0002) - 2 each Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension, and OrthoVision tables Usage: Orthopedic fractures and hip spica NOTE: Patient weight limitation is 400 pounds (181 kg) Wedge-Shaped Sacral Rest with Pad - Child Equipment #: BF00048 Attaches to orthopedic table to support the patient s sacral area. Maximum width measures approximately 4 inches (102 mm). Other Attachments Required: Perineal Post - Child (BF41), Perineal Post Pad - Disposable (NO001) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Hip fractures and other orthopedic procedures in the supine position NOTE: Maximum patient weight capacity is 150 pounds (68 kg). Perineal Post without Pad - Child Equipment #: BF41 Provides counteraction, it is used in supine positions with a sacral rest. Measures approximately 7" (318 mm) including the insert. Other Attachments Required: Wedge-shaped Sacral Rest with Pad - Child (BF00048), Perineal Post Pad - Disposable (NO001) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Orthopedic procedures in the supine position 64 Accessories by Procedure

68 Urology Fluid Collection System Equipment #: BF457 Standard BF56 Bariatric The fluid collection system comes with the flexible drape support and a fluid collection bag. The flexible drape support device quickly attaches to the end of the table seat section during set up, and is easily manipulated intra-procedurally to obtain maximum unobstructed surgical site access. The Bariatric Fluid Collection System comes with adapters so the drape support can be attached to the Bariatric Width Extensions. Both the Sterile and Non-sterile Fluid Collector Bags fit either the standard or Bariatric model drape support. The built-in flexible drain hose works with a kick bucket or a suction cannister. Other Accessories: Set of 10 Fluid Collection Bags: Sterile (BF458) or Non-sterile (BF459) Table Compatibility: 3080, 3080-R, 3085 SP, and Cmax tables Usage: Urologic, cystoscopic, or hysteroscopic procedures Drain Pan Equipment #: BF186 Attaches to the perineal edge of the seat section and can slide back underneath the table when the foot section is raised. Also attaches to IA Extender Accessory. Provides fast drainage. Includes a stainless steel pan measuring 12 1/2" (L) x 10 1/2" (W) (318 x 267 mm), reusable screen insert, and drain pan tubing (8.3 feet long). Other Attachments Required: Drain Pan Tubing (R ) Table Compatibility: 3080, 3080-R and 3085 tables Usage: Urologic procedures Drain Pan Tubing Equipment #: R Tubing can be ordered by the foot. Indicate the length desired, otherwise, the tubing will come in foot long (305 mm) segments. Dimensions: One foot (305mm), O.D. 13/16" (21 mm), I.D. 5/8" (16 mm) Drain Pan Compatibility: BF186 Usage: Urologic procedures Uro X-ray Top Without Pad Equipment #: BF313 Simplifies urologic procedure imaging requirements by permitting 11 x 17" (279 x 432 mm) X-ray cassettes to be loaded from either side of table. This eliminates X-ray shadowing and kidney elevator interference, and does not compromise surgical or anesthesia access. Inserts over back section and IA extender. Other Attachments Required: IA extender (BF188) Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Urologic procedures NOTE: Maximum patient weight capacity is 750 lb (340 kg) for 3085 SP, 600 lb (272 kg) for 3080-R, and 400 lb (181 kg) for 3080 tables. Accessories by Procedure 65

69 Urology IA Extender with 2-inch (51-mm) Pad and X-ray Top Equipment #: BF188 This accessory serves two purposes: (1) for patients in Normal Orientation, the IA Extension is attached between the head and back section of the table to add 8 of imaging length to accommodate taller patients and extends upper body fluoroscopic coverage, and (2), for patients in Reverse Orientation, the IA Extension is attached to the back section of the table to lengthen the imaging window to 24 (61cm) ideal for endourology applications. The Fluid Collection System (BF205) or Drain Pan (BF186) can be attached. Other Accessories Required: Patient Transfer Board with 2 pad (BF204) Table Compatibility: 3080, 3080-R and 3085 SP tables Usage: Endourologic, KUB, and Lithotomy procedures. NOTE: Maximum patient weight capacity is equivalent to that of the table. Cmax Uro/Endo Extension Equipment #: BF575 This lightweight 18 (457 mm) long carbon fiber extension provides additional fluoro imaging length assuring uninterrupted imaging of Kidney, Ureter and Bladder (KUB) anatomy of tall patients (6' 2" model shown). It easily attaches to the side rails of Cmax table s seat section once the leg section is removed, and includes standard side rails for applying leg holders, Fluid Collector System, and arm supports. An integral sub X-ray cassette channel also allows imaging with flat cassettes. Other Accessories Required: Patient Transfer Board with 2" pad (BF204) Table Compatibility: Cmax tables NOTE: Maximum patient weight capacity is 800 lb (363 kg) with the table top centered, and 400 lb (181 kg) with the table top slid fully toward patient s feet. Cmax Transfer Board Equipment #: BF588 This lightweight board supports the patient s legs during transfer to table. It is recommended for leg support only and is removed after patient is positioned. Table Compatibility: Cmax tables NOTE: Maximum patient weight capacity is 300 pounds (136 kg). 66 Accessories by Procedure

70 Urology Patient Transfer Board with 2" (51 mm) Pad - Amsco 3080, 3080-R and 3085 SP tables Equipment #: BF204 Supports patient s legs during transfer to table. Recommended for leg support only. Inserts into IA Extender and is removed after patient is positioned. Includes a 2-inch (51-mm) removable foam pad. Pad attaches to transfer board with Velcro strips. Other Attachments Required: IA Extender (BF188) Table Compatibility: 3080, 3080-R and 3085 SP tables NOTE: Maximum patient weight capacity is 300 pounds (136 kg). Patient Transfer Board with 4" (102 mm) Pad - Cmax/3085 SP/3080-R/3080 Tables with Orthopedic Extension Equipment #: BF214 Supports patient s legs during transfer to table. Recommended for leg support only. Includes a 4-inch (102-mm) removable foam pad. Pad attaches to transfer board with Velcro strips. Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Patient Transfer Board with 2" (51-mm) Pad - OrthoVision table Equipment #: BF213 Lightweight, duotone-covered, aluminum frame supports patient s legs during transfer to and from table. Recommended for leg support only. Fits into access holes in sacral area of OrthoVision tables. Table Compatibility: OrthoVision tables NOTE: Maximum patient weight capacity is 400 pounds (181 kg). Accessories by Procedure 67

71 Disposables/Supplies Perineal Post Pad Disposable Equipment #: NO001 Relieves pressure from perineal area. Fits standard adult perineal posts (BF00065) and can be trimmed to fit child perineal posts (BF41). Made of disposable foam. Case of 10. Other Attachments Required: Perineal Post (BF00065) or child size perineal post (BF41) Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables with Orthopedic Extension and OrthoVision tables Usage: Orthopedic procedures performed in the supine position Disposable Foam Insert Pads for Multi-Position Legholders Equipment #: NO002 Designed for use with Multi-Position Legholders (BF433). Case of 10 pairs. Fluid Collection System Bags Equipment #: BF458 Sterile, box of 10 BF459 Non-Sterile, box of 10 These disposable bags slide over the flexible drape support and are available as either sterile or non-sterile. Each bag has a tissue retention filter as well as a flexible, expandable drain hose that can be connected to suction or used with a kick bucket. These bags fit both the standard and Bariatric drape supports. Other Attachments Required: Fluid Collection System Standard (BF457) or Bariatric (BF56). Table Compatibility: Cmax, 3085 SP, 3080-R and 3080 tables Usage: Urologic, cystoscopic, or hysteroscopic procedures Head Restraint Straps Equipment #: BF039 These single-use straps provide chin and head restraint when used with the Cmax Shoulder Chair (BF594). Each box includes 12 head straps and 12 chin straps. Table Compatibility: Cmax Shoulder Chair (BF594) Usage: Shoulder Arthroscopy NOTE: Maximum patient weight capacity is 500 pounds (227 kg). Shoulder Table Chin Cups Equipment #: BF452 These single-use chin cups are used in conjunction with the Shoulder Table and provide stability for the head and chin during shoulder procedures. Each box contains 10 chin cups. Table Compatibility: Shoulder Table (BF437) Usage: Arthroscopic or open shoulder procedures NOTE: Maximum patient weight capacity is 500 pounds (227 kg). 68 Disposables/Supplies

72 Disposables/Supplies Coverage Spray HB Plus Disinfectant Cleaner Product ID #: , 22 oz./12 per case A ready-to-use hospital-grade quat that kills Hepatitis B Virus in one step. It is effective against gram negative and gram positive bacteria. It is virucidal and fungicidal with a 30-second kill for HIV. Coverage Spray HB has a convenient, easy-to-hold trigger sprayer, and a pleasant fragrance. Product Package Size: 22 oz./12 per case (650 ml/12 per case) T.B.Q. Environmental Disinfectant Cleaner Product ID #: , 55 gal. drum Product ID #: , 5 gal. pail Product ID #: , 1 gal./4 per case A detergent-based germicide concentrate that is multi-purpose and phosphate-free. When diluted as directed, it is biocidally effective against bacteria and fungi including S. aureus, S. choleraesuis, Ps. aeruginosa, M. tuberculosis, and T. mentagrophytes in 10 minutes at 20 C on environmental non-porous surfaces. Product Package Size: 55 gal. drum ( L), 5 gal. pail (19 L), and 1 gal./4 per case (3.78 L/4 per case) Powder Keg \ (1:256 & 1:128) Concentrated Disinfectant Cleaner Product ID #: , 5.5 lb pail (2.5 kg) Packaged in a convenient pre-measured water soluable.5 oz (14 ml) packets. This product is germicidal, fungicidal and virucidal (including HIV-1) in the presence of 5% organic soil. Ideal for one-step heavy duty cleaning, disinfecting, and deodorizing all non-porous, hard environmental surfaces. One packet in one gallon of water is equivalent to a 1:256 dilution. Phosphate-free. Product Package Size: 5.5 lb. pail (2.5 kg) Disposables/Supplies 69