Flow - diaphragm / limiter
|
|
- Bryan Heath
- 6 years ago
- Views:
Transcription
1 GHM Messtechnik GmbH Hans-Sachs-Str Regenstauf Germany Fon +49 () Fax info@ghm-messtechnik.de Flow - diaphragm / limiter System Flow Diaphragm limiter Nominal widths DN 15 - Controlled quantity l/min Water Oils Max. 2 bar Temperature..3 C Applications Central feed Water treatment Irrigation Sanitation installations pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.- 1
2 GHM Messtechnik GmbH Hans-Sachs-Str Regenstauf Germany Fon +49 () Fax info@ghm-messtechnik.de Function and benefits The medium creates a differential on the diaphragm which causes metal or elastomer elements to be pressed together. This creates a reduction in cross-section which restricts the flow to a fixed value. Stainless diaphragm Elastomer diaphragm 1 bar 8 bar 1 bar 8 bar Device overview Device Nominal width Connection Controlled value l/min Housing 1..3 Brass or KM-...G DN Female thread G 1 / 2..G 3 / 4 stainless Diaphragm stainless PN 2..3 C Water, oils Page 3 KM-...A DN 2 - Male thread G 3 / 4 A..G 3 A Brass or stainless stainless -..2 C Water 4 WK DN Female thread G 1 / 2, G Brass or stainless Elastomer PN..65 C Water 5 WP DN 15 Female thread G 1 / Brass Elastomer PN C Water 6 WT DN 15 Female thread G 1 / Brass Elastomer PN.. C Water 7 Errors and technical modifications reserved. 2 pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.-
3 Flow limiter KM-...G Dimensions and weights G Nominal width Type L SW X kg G 1 / 2 DN 15 KM-15G G 3 / 4 DN 2 KM-2G Metal construction The constant flow is created by two crossways stainless spring plates which close or open an annular gap located behind them to a greater or lesser degree, according to the flow value Nominal width DN Process female thread G 1 / 2..G 3 / 4 connection Controlled values Tolerance Controlled value G 1 / 2 G 3 / 4 Tolerance 1 l/min ±.2 l/min 2 l/min ±.2 l/min 3 l/min ±.4 l/min 4 l/min ±.4 l/min 6 l/min ±.5 l/min 8 l/min ±.5 l/min 1 l/min ±.7 l/min 12 l/min ±.7 l/min 16 l/min ±1.2 l/min 2 l/min ±1.2 l/min 25 l/min ±1.5 l/min 3 l/min ±1.5 l/min Differential bar PN 2..3 C..3 C water, viscous media up to 3 mm²/s medium-contact Brass construction: CW614N nickelled, 1.431, Stainless construction: 1.431, 1.431, see table "Dimensions and weights" Installation as desired KM - G For combination option, see table "" 15 DN 15 - G 1 / 2 2 DN 2 - G 3 / 4 G female thread M brass K stainless 1 1 l/min 2 2 l/min 3 3 l/min 4 4 l/min 6 6 l/min 8 8 l/min 1 1 l/min l/min l/min 2 2 l/min l/min 3 3 l/min Options Inlet side, female thread / outlet side male thread Special values Selection Bypass Specify direction of flow, medium, and controlled value. For viscous media specify viscosity,, and medium (e.g. ISO VG 1) (enquire about controlled value). pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.- 3
4 Flow limiter KM-...A medium-contact Installation water Brass construction: Stainless CW614N nickelled, construction: 1.431, 1.431; , 1.431, ; see table "Dimensions and weights" as desired Dimensions and weights Male thread Metal construction The constant flow is created by two crossways stainless spring plates which close or open an annular gap located behind them to a greater or lesser degree, according to the flow value. The controlled value results from the addition of the individual control inputs Nominal width DN 32.. Process male thread G 3 / 4 A..G 3 A connection Controlled values Connection Controlled Control inputs value G 3 / 4 A l/min 1 G 1 / 2 A l/min 2..3 G 2 A 3.. l/min 3..4 G 2 1 / 2 A l/min 5 G 3 A l/min 6..7 Example: The controlled value of 55 l/min is achieved using a limiter with two control inputs of 3 l/min + 25 l/min. Control inputs individual controlled values for the control inputs 1 l/min 6 l/min 16 l/min 2 l/min 8 l/min 2 l/min 3 l/min 1 l/min 25 l/min 4 l/min 12 l/min 3 l/min Tolerance to 2 l/min: ±15 % of nominal value from 3 l/min: ±1 % of nominal value Differential 2..1 bar..2 C..2 C G Nominal width Type H Control inputs kg G 3 / 4 A DN 2 KM-2A G 1 / 2 A DN 4 KM-4A G 2 A DN 5 KM-5A G 2 1 / 2 A DN 65 KM-65A G 3 A DN KM-A KM - A 2 DN 2 - G 3 / 4 A 4 DN 4 - G 1 / 2 A 5 DN 5 - G 2 A 65 DN 65 - G 2 1 / 2 A DN - G 3 A A male thread M brass K stainless l/min 2..9 l/min l/min l/min l/min Options Special values Specify direction of flow, medium, and controlled value. For viscous media specify viscosity,, and medium (e.g. ISO VG 1) (enquire about controlled value). 4 pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.-
5 Flow limiter WK Dimensions and weights G Nominal width Type L SW X kg G 1 / 2 DN 15 WK-15G G 3 / 4 DN 2 WK-2G G 1 DN 25 WK-25G Mechanical flow limiter for fluid media. If the volume flow is tending to increase, an elastomer is compressed. This achieves an almost constant flow value. Nominal width DN Connection type internal thread G 1 / 2..G 1 Controlled values 3 l/min 6 l/min 1 l/min 15 l/min 5 l/min 8 l/min 12 l/min Differential 2..1 bar Tolerance ±15 % PN..65 C..65 C water media-contact Installation Brass construction: CW614N, POM, NBR, Stainless construction: 1.435, POM, NBR, see table "Dimensions and weights" as desired WK - G 15 DN 15 - G 1 / 2 2 DN 2 - G 3 / 4 25 DN 25 - G 1 G female thread M brass K stainless 3 3 l/min 5 5 l/min 6 6 l/min 8 8 l/min 1 1 l/min l/min l/min Options Inlet side, internal thread / outlet side external thread Special values Selection Bypass Specify direction of flow, medium, and controlled value pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.- 5
6 Flow limiter WP Dimensions Brass Mechanical flow limiter for fluid media. If the volume flow is tending to increase, an elastomer is compressed. This achieves an almost constant flow value. Stainless Nominal width DN 15 Process female thread G 1 / 2 connection Controlled values.5 l/min 4. l/min 12. l/min 1. l/min 5. l/min 15. l/min 1.5 l/min 7. l/min 18. l/min 2. l/min 8. l/min 2. l/min 3.2 l/min 1. l/min Differential 1..1 bar Tolerance ±1 % PN C..7 C water CW614N, NBR medium-contact.2 kg Installation as desired WP - 15 G = Special option 15 DN 15 - G 1 / 2 G female thread M brass K stainless 5.5 l/min 1 1. l/min l/min 2 2. l/min l/min 4 4. l/min 5 5. l/min 7 7. l/min 8. l/min 1. l/min 12. l/min l/min Specify direction of flow, medium, and controlled value 6 pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.-
7 Flow limiter WT Dimensions Mechanical flow limiter for fluid media. If the volume flow is tending to increase, an elastomer is compressed. This achieves an almost constant flow value Nominal width DN 15 Process female thread G 1 / 2 connection Controlled values 5. l/min 7.5 l/min 13.5 l/min Differential bar Tolerance ±15 % PN.. C..7 C water CW614N nickelled NBR medium-contact.2 kg Installation as desired WT - 15 G M 15 DN 15 - G 1 / 2 G female thread M brass 5 5. l/min H 2O l/min H 2O l/min H 2O Specify direction of flow, medium, and controlled value. pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.- 7
8 GHM Messtechnik GmbH Hans-Sachs-Str Regenstauf Germany Fon +49 () Fax info@ghm-messtechnik.de Product overview Laboratory Instrumentation 8 pi-ho-sm-flow-flow_diaphragm_ limiter_e V1.-
AIR PREPARATION UNITS 3/4" NPT & 1" NPT SERIES
PNEUMATIC GROUP AIR PREPARATION UNITS 3/" NPT & " NPT SERIES 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 83 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 Port size Recommended
More informationMechanically actuated valves
Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials
More informationLiquid ring vacuum pumps single-stage
Liquid ring vacuum pumps single-stage LOH 20103, LOH 20107 Pressure range: Suction volume flow: 150 to 1013 mbar 7 to 58 m³/h CONSTRUCTION TYPE Sterling SIHI liquid ring vacuum pumps are displacement pumps
More informationTECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
More informationChoose smart valves for balancing Flow
Choose smart valves for balancing Flow For easy balancing of the flow NC Flow balancing valves NC Flow is designed for balancing heating and cooling systems. Incorrectly balanced flow is a common cause
More informationInstallation, operation and service manual BMA 05
BMA 05 Please read this manual carefully before installing and using the BMA 05 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
More informationCheck Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
More informationDEBSON TM2 OXYGEN THERAPY FLOWMETERS WITH PRE ADJUSTED FLOWRATES. English version 09/2015
DEBSON TM2 English version 09/2015 RAIL MOUNTING SYSTEMS 2 DIRECT PROBES 3 DEBSON TM2 The DEBSON TM2 is used to set the of a gas that is to be delivered to patients through the respiratory tract. It is
More informationInline Filters (F Series) Catalog 4130-F July 2005
Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and
More informationPOWERED BY. 200Watts. Dual Batteries in Series
POWERED BY 200Watts Dual 18650 Batteries in Series 1 1. OVERVIEW 2. STANDARD PACKAGE 3. MAIN FEATURES 4. BASIC OPERATION 5. PRECAUTIONS 6. WARRANTY 2 1. OVERVIEW Fire Button OLED Screen Display 510 Atomizer
More informationFITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
More informationROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
More informationImpact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
More informationPneumatic Atomizing Lances Series 77X / 78X / 79X
Pneumatic Atomizing Lances Series X / 8X / 9X Pneumatic Atomizing Lances Series X / 8X / 9X Design n External mixing twin fluid nozzle to produce finest droplets n Length up to 2.000 mm n Different standardized
More informationORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS
Bulletin E79 rev0 02/03/03 ORIFICE FLOW METERS WITH CHAMBERS MEASURING RINGS POP-U-S SERIES FEATURES UNI PN6 flanges: iron Chamber measuring rings: iron Disc: AISI30 Max. operating temperature: 00 C Max.
More informationGRUNDFOS DATA BOOKLET. BM, BMhp. Booster Modules 50/60 Hz
GRUNDFOS DATA BOOKLET BM, BMhp Booster Modules 5/6 z BM, BMhp Table of contents 1. BM applications 4 Pumped liquids 4 2. BM product introduction 4 Standard pumps 4 Construction 4 Motor 4 3. BM, BMhp performance
More informationMisc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
More informationBROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
More informationRBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
More informationEnvironmental Submersible Pumps
Environmental Submersible Pumps Grundfos 85S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
More informationGewässer Umwelt Schutz
Gewässer Umwelt Schutz GmbH CUW Oil protector Assembly instructions 2 Foreword Always study this assembly instruction manual before Installation and initial operation. This assembly instruction manual
More informationEnvironmental Submersible Pumps
Environmental Submersible Pumps Grundfos 300S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
More informationEnvironmental Submersible Pumps
Environmental Submersible Pumps Grundfos 230S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
More informationCompressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
More informationSUMMARY UNITS INTRODUCTION PAGE 2-4 KEY TO CODES PAGE 2-7 FILTER PAGE 2-8 DEPURATOR PAGE 2-11 ACTIVE CARBON FILTER PAGE 2-14.
SUMMARY INTRODUCTION PAGE - KEY TO CODES PAGE -7 FILTER PAGE -8 DEPURATOR PAGE - SUMMARY Syntesi ACTIVE CARBON FILTER PAGE - REGULATOR PAGE -7 IN-SERIES REGULATOR PAGE - FILTER-REGULATOR PAGE - LUBRICATOR
More informationADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS Anamet IECEx-ATEX adapter fitting, type RNC and RAC, nickel plated brass Type RNC IECEx-ATEX approved 45 or 90 nickel plated brass adapter, male
More information300 PRO FILTER VALVE OPERATING MANUAL. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0028 Rev.
300 PRO FILTER VALVE OPERATING MANUAL S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0028 Rev. C Pag 1 di 27 300 PRO FILTER SERVICING MANUAL Document Revision Revision Note Date MAN0028
More informationTEKNOCRAFT INC. Proportional Valves. Mini Valves. Outlet Balanced Valves. Standard Valves. Your Proportional Valve Specialists
TEKNOCRAFT INC. Your Proportional Valve Specialists Proportional Valves Mini Valves Outlet Balanced Valves Standard Valves Table of Contents Teknocraft Unique Designs... 3 Mini Valves... 6 Outlet Balanced
More information3/4" NPT 3080 MF 185-3/4-US 1" NPT 3080 MF US
Port size Recommended flow Page No. (l/min) 1/8" NPT 125 MF 007-1/8-US 111-112 1/4" NPT 125 MF 007-1/4-US 1/8" NPT 200 MF 012-1/8-US 113-114 1/4" NPT 200 MF 012-1/4-US 3/8" NPT 200 MF 012-3/8-US 3/8" NPT
More informationBM, BMhp. Lenntech. Lenntech. Booster modules 50/60 Hz. Tel Fax.
GRUNDFOS DATA BOOKLET BM, BMhp Booster modules 5/6 z Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 Lenntech BM, BMhp Table of contents 1. Performance ranges 3 BM, 5
More informationCompressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
More information1.OVERVIEW 2.STANDARD PACKAGE 3.MAIN FEATURES 4.BASIC OPERATION 5.PRECAUTIONS 6.WARRANTY
USER MANUAL 1.OVERVIEW 2.STANDARD PACKAGE 3.MAIN FEATURES 4.BASIC OPERATION 5.PRECAUTIONS 6.WARRANTY 2 1. OVERVIEW 510 Atomizer Connector Fire Button Triple 18650s in Series OLED Screen Display (-)Down
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features ety of mounting flanges and output shafts options Benefits motor into a system tough applications Applications Description The 0 Series offers up to 0 in-lb of torque and gpm (continuous
More informationRATCHETS RATCHET ACCESSORIES DENTAL PRODUCTS PRODUCT CATALOG A company of the KLINGEL GROUP
RATCHETS RATCHET ACCESSORIES DENTAL PRODUCTS PRODUCT CATALOG 0 A company of the KLINGEL GROUP Contents Universal ratchet without torque function General information All ratchets are available with different
More informationConveyor System MM3. Chain width 83mm MODU System MM3 conveyor is also available in stainless steel. See page DM1.
Conveyor System MM3 Conveyor System MM3 Chain width 83mm MODU System MM3 conveyor is also available in stainless steel. See page DM1. Features Suitable for a wide range of applications. Examples of application
More informationMFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
More informationNeedle Valves Catalog 4110-NV December 2010
Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures
More informationSMAC CABLE CATALOGUE. SMAC, the innovative elastomer expert FIT/10/05B
SMAC CABLE CATALOGUE SMAC, the innovative elastomer expert FIT/10/05B SMAC CABLE The SMAC CABLE wire rope isolators are entirely metallic and possess multi-axis characteristics. They are well adapted for
More informationDescription. Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings
Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings R Description Although Proximitor and interface are rugged by design, these units and their electrical connections
More informationVALVES. Nugget 200 Spool Valves 1/4", 3/8", 1/2" NPT Air Pilot Actuated 3/2, 5/2, & 5/3 Inline Valves
Nugget 00 Spool Valves 1/", 3/8", 1/" NPT Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves Long lasting spool design High flow compact valves Three functional types: available in 3/, 5/, and 5/3 configurations
More informationINTEGRAL-BONNET NEEDLE VALVES H-300 SERIES
INTEGRAL-BONNET NEEDLE VALVES SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES FEATURES n Straight and angle pattern n Stainless Steel and Brass construction n MAWP 5000 psi (345 bar) n MAWT 446 F (230 C) n
More informationSubmersible. Pumps Motors. 60Hz 4 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
More informationIn-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
More informationRLS/M MZ SERIES. Modulating Dual Fuel Burners FIRING RATES DUAL FUEL
The RLS/M MZ series of burners covers a fi ring range from 550 to 2460 kw, and they have been designed for use in hot or superheated water boilers, hot air or steam generators, diathermic oil boilers.
More informationDescription The 4000 Series offers up to 8600 in-lb of torque and 25 gpm (continuous ratings). This is the corner stone of the Char-Lynn line.
Highlights Features displacements, a variety of mounting flanges and output shafts Reliable, proven design High efficiency Environmental protection options Benefits Flexiblilty in designing this motor
More informationUnion Bonnet Valves - VU6 Series
BlowOur Proof Back Seating Hardened Stem Thread Mountable Panel nut Metal Seal Bonnet Union Bonnet Valves VU6 Series Features Pressure rating up to 6000psig (13bar) @38 C (100 F) Temperature rating from
More informationOriginal Chiksan Swivel Joints
Original hiksan Swivel Joints Steamlined bore minimizes flow restrictions Smooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extralong radius
More informationAir Preparation Equipment
FRLS Improve system efficiency Side-by-side and stacking units available Modular design for easy connection and maintenance Variety of port sizes from #10-30 to 1" NPT pp. 170-174 FILTERS Capture solid
More informationON/OFF zone valves (PN 16) AMZ 112, AMZ 113
ata sheet ON/OFF zone valves (PN 16) MZ 112, MZ 11 escription MZ 112 / 2-port valve N15-N2 MZ 112 / 2-port valve N40-N50 MZ 11 / -port valve The ON / OFF zone valves type MZ 112 and MZ 11 are typical used
More information12 EEx d-conduit Material
12 EEx d-conduit Conduit Fittings Conduit fittings, BMF, with female/male union Series Nominal Ordering code Weight RN2095 BMF 1 1 /2" NPT 461 557 0 0,15 BMF 2 3 461 558 0 0,20 BMF 3 1" NPT 461 559 0 0,28
More informationInstallation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
More informationMerkel Guide Ring Guivex SBK
Merkel Guide Ring Guivex SBK Merkel Guide Ring Guivex SBK Material range 300 Material Code Colour Fabric-base laminate GW G517 Dark grey Fabric-base laminate GW G650 Red Fig. 1 Merkel Guide Ring Guivex
More informationOff-line filter system
Off-line filter system 15 NFT / 35 NFT RE 51431-B/03.10 Replaces: -.- English Operating instructions The data specified above only serve to describe the product. No statements concerning a certain condition
More information747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
More informationHEATEXCHANGER AND CONDENSER TUBES: PIPES, FITTINGS, FLANGES, PLATES AND BARS: STAINLESS STEEL NICKEL AND NICKEL ALLOYS TITANIUM ADMIRALTY BRASS
Stock PIPES, FITTINGS, FLANGES, PLATES AND BARS: NICKEL AND NICKEL ALLOYS TITANIUM DUPLE and SUPERDUPLE STAINLESS STEEL HEATECHANGER AND CONDENSER TUBES: STAINLESS STEEL Aluminium Brass ADMIRALTY BRASS
More informationST SERIES. design, development, production made in Germany
ST SERIES design, development, production made in Germany ST 01 - Crunch Bench ST 02 - Push-up Bars ST 03 - Pull-up Bars ST 04 - Back Bench ST 05 - Balance Board ST 06 - Stretching Bars SE ST 01 - Crunch
More informationInterchange Coupling. Poppet: Interchange Coupling
griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series,
More informationsecutex edge protector
secutex edge protector If the load has sharp edges or has a rough surface, suitable abrasion or edge protection must be used. secutex edge protectors are easy to handle and flexible to use. The optional
More informationFILTREC SUCTION FILTERS SECTION 19B. FilTers. FA-1 suction spin-on Fs-1 suction strainers Fs-7 in tank mounted suction strainers...
FILTREC SUCTION FILTERS SECTION 19B suction FilTers FA-1 suction spin-on...688 Fs-1 suction strainers...694 Fs-7 in tank mounted suction strainers...699 50% off all prices 636-770 Harrier Catalogue 14
More informationCam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
More informationHydraulic Motor & Brake
whitedriveproducts SERIES 00-0 - 0 - HEVY DUTY Hydraulic Motor & rake DT DT (ll Series) For Heavy Duty pplications whitedriveproducts Overview series descriptions The most amazing aspect of the DT Series
More informationTechnical Data Sheet SONOFLOW CO.55 V1.0
Technical Data Sheet SONOFLOW CO.55 V1.0 The sensor series SONOFLOW CO.55 V1.0 designed as clamp-on-sensors detect the flow rate of liquids in plastic tubes of different diameters or materials within a
More informationFILTER REGULATORS AND PARTS
COMPRESSED AIR ACCESSORIES PRICING 5-2017 WWW.RAPIDAIRPRODUCTS.COM 800-954-3310 FILTER REGULATORS AND PARTS 175psi MAX INLET, 0-150psi adjustment range PRICE QUANTITY K93210 INLINE REGULATOR W/GAUGE, 1/4"
More informationGoniometer WT-85. Goniometer WT-100. Goniometer WT-90. Goniometer WT-120. // West //
Goniometer Rotation Stages Goniometer WT-85 Goniometer WT-0 Goniometer WT-90 Goniometer WT-120 www.pimicos.com // info@pi-usa.us // 8.832.356 East 99.679.9191 West // www.pi-usa.us 5.192 Goniometer WT-85
More informationSED2 VFD NEMA Type 3R Bypass, and Type 3R Harsh Environment (3RHE) Bypass
Document No. 129-405 SED2 VFD NEMA Type 3R Bypass, and Type 3R Harsh Environment (3RHE) Bypass Product Description The SED2 VFD NEMA Type 3R/3RHE, Bypasses are companion packages for the family of SED2
More information...our linkages, your solution. Ball & Socket Joints
...our linkaes, your solution Ball & Socket ov-ball-and-socket-joints-divider - Updated - 12-01-2017 Overview Ball & Socket Ball & Socket Ball and Socket Ball and socket joints to DIN 71802 available in
More informationHyquest Solutions Pty Ltd
INSTRUCTION MANUAL FIELD CALIBRATION DEVICE MODELS FCD 653, FCD 314 & FCD 730 QUALITY SYSTEM ISO: 9001 CERTIFIED HYQUEST SOLUTIONS PTY LTD PO BOX 332, LIVERPOOL B.C NSW 1871, AUSTRALIA Phone:(Int.) 612
More informationAC CENTRIFUGAL FORWARD CURVED FAN 133 x 190
Micromotori Elettrici Svizzera Motor Type AC CENTRIFUGAL FORWARD CURVED FAN 133 x 19 Code: 3.9775 Project code: Poles Stator Impeller Type -4 V 5/6 Hz ~ 1 1 M35 Centrifugal Forward Curved Blade double
More informationAccessories for LV AirGuard Cables Glands, Connectors and Installation Tools.
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools. A Non-Potted Gland TECHNICAL DATA Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444 Mechanical Classifications*
More informationDescription. Modell-Nr Airless ProfessionalLine. According to ISO 1167 ASTM D 1598 ASTM D Simple and safe operation. Reliable test results
Modell-Nr. 1720 Airless ProfessionalLine According to ISO 1167 ASTM D 1598 ASTM D 1599 Description The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes.
More informationPreparation Instructions for the CAMLOG /CONELOG Implant System
J8000.0032 Rev.6 EN 06/2015 Preparation Instructions for the CAMLOG /CONELOG Implant System ENGLISH The following descriptions contain detailed instructions on cleaning, disinfection and sterilization
More informationFlowmeters and. Specialty Products
Flowmeters and Specialty Products Chrome Flowmeter Durable, Accurate, Precise, Dependable 1MFA9005 4MFA1001 1MFA2001 1MFA1101 6MFA1001 1MFA3001 1MFA3501 1MFA1001 Specifications Model Gas Scale Increments
More informationPOLARIS 10 SERIES. Hydraulic Gear Pumps and Motors. Max. speed. Min. speed. Theoretical displacement pressure p1
PL10 01 R A POLARIS 10 SERIES Hydraulic Gear Pumps and Motors Edition: 01.1998 Replaces edition: 10.1995 PRESSURE Max. continuous Max. intermittent Max. peak 3770 psi (260 bar) 4060 psi (280 bar) 4350
More informationNew aspects for bipolar plates and gaskets for fuel cells and redox flow batteries
New aspects for bipolar plates and gaskets for fuel cells and redox flow batteries Dr. Rouven Henkel Eisenhuth GmbH & Co. KG D - 37520 Osterode GERMANY Product range injection molding 3 main divisions
More informationRLS/E-EV MX SERIES. Low NOx Modulating Dual Fuel Burners FIRING RATES
The RLS/E-EV MX series of burners covers a firing range from 350 to 2400 kw, and they have been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil
More informationvpos POSITIONING SYSTEMS APOS OPTIC
1 vpos POSITIONING SYSTEMS APOS OPTIC 7B EN 2017 2 APOS OPTIC KEY HIGHLIGHTS RELIABLE POSITIONING SYSTEM Dual integrated cameras ensure high reliability in critical functions. Instant and accurate positioning
More informationIn-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
More informationSE Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: SHOWER FEATURES FINISH: OPTIONS: WARRANTY:
Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: Independent eye wash & face wash integrated into one, multi-functioning safety unit. Aerated sprays for eyewash comfort & innovative
More informationInstallation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
More informationRLS /M MX SERIES
RLS/M burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above all, more flexible.
More informationATMOS Cardiothoracic Drainage
Safe, time saving and mobile! ATMOS Cardiothoracic Drainage Made in Black Forest by ATMOS ATMOS Cardiothoracic Drainage During day-to-day work in clinics, we come across a variety of medical indications
More informationAir Filters. Inlet silencers. 1. Description. compactdesign. easeofhandling. fitted with high efficiency filter elements.
Air Filters Inlet silencers 1. Description Good filtrationis not only highly important in machineswhich take in air like compressors, vacuum pumps and combustion engines, good inletsilencingisalsobecomingincreasinglyvital.
More informationWith extended functionality the sensors are also applicable for the detection of air bubbles.
Technical Data Sheet The sensor series designed as clamp-on-sensors detect the flow rate of liquids in plastic tubes of different diameters or materials within a few milliseconds. With extended functionality
More informationSureFlow. Oxygen Flow Station PROVIDER TECHNICAL MANUAL
SureFlow Oxygen Flow Station PROVIDER TECHNICAL MANUAL Table of Contents Definition of Product Symbols... 3 General Information... 3 Warning and Caution Statements...3 Introduction to the SureFlow Oxygen
More informationThe Do s and Don ts of Pressure Transducers
The Do s and Don ts of Pressure Transducers ABSTRACT When specifying a pressure transducer for a process measurement, a number of items have to be considered. Some of the more important ones are discussed
More informationAdvanced in vitro exposure systems VITROCELL VC 1 SMOKING MACHINE
Advanced in vitro exposure systems VITROCELL VC 1 SMOKING MACHINE Options for e-cigarettes VITROCELL VC 1 SMOKING MACHINE Manual smoking machine with high tech features square puff profiles higher puff
More informationBosch BOVA Split System Heat Pump
Bosch BOVA Split System Heat Pump Condensing Units Up to 18 SEER 2-3-4-5 Ton Capacity R410A Product Specifications Product Specifications Split System Heat Pump Up to 18 SEER 2-3-4-5 Ton Capacity R410A
More informationProduct Specifications and Usage Information P4405, P4410, & P4420 Genesys 30 Dosimeter Holder System
DESCRIPTION The Thermo Genesys 30 Spectrophotometer (G30) is supplied with specially designed dosimeter holders to fit a variety of dosimeters, including the B3 DoseStix and B3 WINdose dosimeters. The
More informationAdvanced in vitro exposure systems
Advanced in vitro exposure systems VITROCELL VC 1/7 SMOKING MACHINE Features for e-cigarettes VITROCELL VC 1/7 SMOKING MACHINE Linear smoking machine with high tech features square puff profiles higher
More informationVacuum pumps. Vacuum pumps
For over 50 years, PIAB has been developing a range of vacuum solutions that cover the widely varying needs of the market. We constantly strive to improve our products and adapt them to market needs by
More informationPlant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
More informationNondestructive Testing Procedure: Liquid Penetrant Testing
MOGAS INDUSTRIES, INC. Nondestructive Testing Procedure: Liquid Penetrant Testing Specification: NDT 0200 Version: 2.0 November 10, 2014 Approved by: Signature Paul T. Marks Consulting Level III ACCP Professional
More informationSafe. Clean. Rapid. DAC UNIVERSAL cleans, lubricates and sterilizes at the touch of a button
CAD/CAM SYSTEMS INSTRUMENTS HYGIENE SYSTEMS TREATMENT CENTERS IMAGING SYSTEMS DAC UNIVERSAL cleans, lubricates and sterilizes at the touch of a button Safe. Clean. Rapid. DAC UNIVERSAL The hygiene formula
More informationAngle-stable Foot plate system Pedus-O and Pedus-U
www.marquardt-medizintechnik.de Angle-stable Foot plate system Pedus-O and Pedus-U Angle-stable Pedus-O and Pedus-U foot plate system > Angle-stable Pedus-O foot plate system 1. Product characteristics
More informationÜBERCLEAN! Introducing the new STATMATIC PLUS.
ÜBERCLEAN! Introducing the new STATMATIC PLUS. Product Advantages Safe validated cleaning verified by microbiological testing done by an independent laboratory. Economical low purchasing and operating
More informationDynalene Propylene Glycol Series
Dynalene Propylene Glycol Series Inhibited Propylene Glycol Heat Transfer Fluids Process Applications HVAC/R Food & beverage Solar Applications Thermal Storage Process cooling & heating Ice & snow melting
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationLabVIEW Profibus VISA Driver DP-Slave
DP-Slave Getting Started V1.29 25.09.2007 Project No.: 5303 Doc-ID.: COMSOFT d:\windoc\icp\doku\os\lv-visa\version 1.22\gettingstarted_win_dp-slave_e1.29.doc Revision History Version Date Description V1.11
More information