EXTERNAL HEX INTERNAL HEX NTERNAL. ENDOPORE Product Catalog

Transcription

1 Osteotome PROCEDURES perfect NTERNAL PERFECT SURFACE ENDOPORE Product Catalog INTERNAL HEX PerfeCT SURFACE EXTERNAL HEX Implant Placement Procedure

2 ENDOPORE

3 Table of Contents ENDOPORE Contents Endopore Implants with internal connection 4 Endopore Implants with internal connection for one-stage surgery 5 Case Planning Chart Crown and Bridge Restorations 7 Cover Screws 7 Cementable s 7 ECO System 8 Octabutment System Overdenture Restorations 9 Locator System 10 Dalla Bona System 10 O-Ring System Endopore Implants with internal Hex 11 Endopore Implants for one-stage and two-stage surgery 12 Case Planning Chart Crown and Bridge Restorations 14 Cover Screws 14 Healing s 15 Transfer Copings 15 Implant Analogs 15 Retaining Screws 16 Hexed s 16 Angled s 17 UCLA s Overdenture Restorations 18 Locator System 19 O-Ring System 19 Dalla Bona System 20 UMA System Endopore Implants with external Hex 21 Endopore External Hex Connection implants for one-stage and two-stage surgery 23 Case Planning Chart Crown and Bridge Restorations 26 Cover Screws 26 Healing s 27 Transfer Copings 28 Implant Analogs 28 Retaining Screws 29 Hexed s 30 Angled s 30 Temporary Titanium s 31 UCLA s Overdenture Restorations 32 Locator System 32 O-Ring System 33 Dalla Bona System 34 UMA System 36 Prosthetic Instrumentation Surgery 38 Endopore Surgical Kits 39 Endopore Surgical Instrumentation 42 Articles in alphabetical order 3 Internet All print material released by Oraltronics is available online, too. Product catalogs and insertion brochures as well as information for patients or current case reports it takes you only 4 steps to get to the print product desired. Just click under

4 ENDOPORE Internal connection Endopore Implants with internal connection for one-stage surgery 4 The Endopore implants have a standard Morse Taper implant-to-abutment interface and are supplied in both 4.1 mm and 5.0 mm implant diameters, each having a 4.8 mm abutment platform diameter. This allows both the 4.1 mm and 5.0 mm diameter implants to accept the same prosthetic components. Each implant diameter is available with a 1.8 mm transgingival collar. A 1 mm low profile cover screw is packaged with each implant. AP* TC* Length 4.8 mm AP* Implant Ø 4.1 mm 1.8 mm TC* Length 4.8 mm 1.8 mm 7 mm 01S-7I mm 1.8 mm 9 mm 01S-9I mm 1.8 mm 12 mm 01S-12I1.8 Implant Ø 5.0 mm 4.8 mm 1.8 mm 5 mm 01WS-5I1.8 * AP Platform Ø ** TC Transgingival Collar Diameter 4.8 mm 1.8 mm 7 mm 01WS-7I mm 1.8 mm 9 mm 01WS-9I mm 1.8 mm 12 mm 01WS-12I1.8

5 Internal connection BICORTICAL ENDOPORE Case Planning Chart One-stage Surgery Angled Cementable Straight Cementable ECO Octabutment 5 Crown Bridge Locking Non-Locking Crown Bridge Bar

6 ENDOPORE Internal connection Case Planning Chart 6 One-stage Surgery Locator System O-Ring System Dalla Bona System Impression Stage Laboratory Processing Final Restoration Overdenture

7 Internal connection BICORTICAL ENDOPORE Crown and Bridge Restorations Cover Screws Length Cover Screw (replacement) A 1 mm cover screw is packaged with each implant. 1 mm 02S-1HS 2 mm 02S-2HS 3 mm 02S-3HS 4 mm 02S-4HS Cementable s Length Straight Cementable s 4.0 mm 05S-4.0FS 5.5 mm 05S-5.5FS 7.0 mm 05S-7.0FS 7 Angled Cementable s Angle 15 Angle 25 05S-15FA 05S-25FA 15 ECO System ECO and Cap for cementable restorations Length 5.0 mm (7.0 mm with cap) ECO Analog 05S-5ABUT/WC 06S-ANALOG 7.0 mm 5.0 mm ECO ECO Analog ECO Coping Indexed ECO Coping Non Indexed 06S-COPING/I 06S-COPING ECO Coping Indexed ECO Coping Non Indexed

8 ENDOPORE Internal connection Octabutment System The Octabutment System is used for all procedures where a removable prosthesis is required, or where a working model incorporating an abutment analog is desired. Octabutment Octabutment Cap with Screw 07S S-2100 Octabutment Cap with screw Transfer Coping with Guide Pin for Octabutment Octabutment Analog 07S S-0015 Transfer Coping Octabutment Analog 8 Temporary for Octabutment locking Temporary for Octabutment non-locking Temporary abutments include an octabutment retaining screw. 07S S-0353 locking non-locking Plastic Coping for Octabutment locking 07S-0203 Plastic Coping for Octabutment non-locking 07S-0253 locking non-locking Note: Plastic copings include an octabutment retaining screw. Octabutment Retaining Screw 07S-0053 Accessories Insertion Tip for the ECO and Cementable 07S-0176 Insertion Tip for Octabutment 07S-0175 Driver Housing Driver Tip 0.05 Hex Tip TWHT Insertion Tip Insertion Tip for Octabutment Driver Housing 0.05 Hex Tip Hex Tip 12.5 mm

9 Internal connection BICORTICAL ENDOPORE Overdenture Restorations Locator s Impl. Ø mm Collar The Locator abutment is an attachment with a self-aligning feature. This feature will aid patients in seating their denture and eliminate additional wear from improper seating. With the Locator s minimal vertical height, it is ideal where interocclusal space is limited. This abutment can also accommodate up to 40 between implants. 4.1/ 5.0 mm 0.73 mm / 5.0 mm 2 mm / 5.0 mm 3 mm / 5.0 mm 4 mm mm Platform Locator Attachments Locator Attachments 9 Locator Male Processing Package 2 Sets, each Set includes: 1 Processing Replacement Male 8515, 1 Replacement Male 8524/ 8527/8529, 1 Spacer white Locator Replacement Male clear, 4 Pack Locator Light Retention Replacement Male pink, 4 Pack Locator Extended Range Replacement Male green, 4 Pack Locator Extra Light Extended Range Male red, 4 Pack Locator Black Processing Replacement Male 4 Pack Locator Extra Light Retention Replacement Male, blue, 4 Pack 8529 Locator Parallel Post 4 Pack 8517 Locator Impression Coping 4 Pack 8505 Locator Female Analog 5 mm Diameter. 4 Pack 8516 Locator Parallel Post Locator Impression Coping Female Analog Ø 5 mm Angle Measurement Guide 9530 Angle Measurement Guide Locator Core Tool 8393 Locator Driver 15 mm length 21 mm length Ncm Torque Wrench (Ncm Newton centimeters) 06-TW20

10 ENDOPORE Internal connection Overdenture Restorations Dalla Bona and O-Ring Systems The ORS and the Dalla Bona abutments lie flush with the top of the implant when the abutments are inserted into the Endopore One-Stage implants. Note Please refer to pages for Dalla Bona System and O-Ring System. 10 Dalla Bona System Each Dalla Bona System includes a titanium male abutment, a brass abutment analog, a titanium female with a PVC ring and a spacer. 07S-3000 O-Ring System Each O-Ring System includes a titanium male abutment and an ORS lab kit which includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. 07S-4000 Note The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. Accessories Driver Housing Driver for ORS and Dalla Bona System Dalla Bona Activating Tool An instrument used to increase the retention of an attachment Dalla Bona Deactivating Tool An instrument used to reduce the retention of an attachment

11 Internal hex BICORTICAL ENDOPORE Endopore Implants with internal hex for one-stage and two-stage surgery Endopore Implants with internal hex are supplied in both 4.1 mm and 5.0 mm implant platforms. A low profile cover screw is packaged with each implant. 11 SCR* Length SCR* Length Implant Ø 4.1 mm 2 mm 7 mm 01l-7I2 2 mm 9 mm 01l-9I2 2 mm 12 mm 01l-12I2 Implant Ø 5.0 mm Diameter * SCR Smooth Coronal Region 2 mm 7 mm 01Wl-7I2 2 mm 9 mm 01Wl-9I2 2 mm 12 mm 01Wl-12I2

12 ENDOPORE Internal hex Case Planning Chart Flared Healing Straight Healing 12 One- and twostage Surgery Flared Transfer Straight Transfer Impression Stage Coping Assembly Coping Assembly Flared Hexed Angled Hexed Angled Hexed Straight Hexed Hexed UCLA Non-Hexed UCLA Laboratory Processing Final Restoration Crown Bridge

13 Internal hex BICORTICAL ENDOPORE Case Planning Chart One- and twostage Surgery Straight Healing 13 Impression Stage Locator System O-Ring System (ORS) Dalla Bona System Laboratory Processing Final Restoration Overdenture

14 ENDOPORE Internal hex Crown and Bridge Restorations Cover Screws Impl. Ø mm Cover Screw (replacement) A low profile cover screw is packaged with each implant. 4.1 mm 02I-CS 5.0 mm 02WI-CS Healing s Impl. Ø mm Length Width 14 Straight Healing s The straight healing abutment is used in all situations except where an expanded gingival cuff is desired. 4.1 mm 3 mm 4.1 mm 02B-3HS 4.1 mm 5 mm 4.1 mm 02B-5HS 4.1 mm 7 mm 4.1 mm 02B-7HS 5.0 mm 3 mm 5.0 mm 02WB-3HS 5.0 mm 5 mm 5.0 mm 02WB-5HS 5.0 mm 7 mm 5.0 mm 02WB-7HS Flared Healing s The use of a flared healing abutment allows the gingiva to heal around this expanded profile, where a more natural emergence profile is preferred. 4.1 mm 4 mm 5.5 mm 02B-4H 4.1 mm 6.5 mm 5.5 mm 02B-6.5H 5.0 mm 4 mm 6.4 mm 02WB-4H 5.0 mm 6.5 mm 6.4 mm 02WB-6.5H Width Width Length Length Straight Healing Flared Healing

15 Internal hex BICORTICAL ENDOPORE Transfer Copings The shape of the transfer coping matches the shape of the corresponding healing abutment and this allows the profile of the gingival cuff to be accurately reproduced in the working model. Transfer Copings Impl. Ø mm Length Straight Transfer Copings for use with straight healing abutments, incl. screw Flared Transfer Copings for use with flared healing abutments incl. screw Transfer Coping Screw, long for optional use with transfer copings, when an open tray technique is used 4.1 mm 11 mm 06I-CTCA/S 5.0 mm 11 mm 06WI-CTCA/S 4.1 mm 11 mm 06I-CTCA/F 5.0 mm 11 mm 06WI-CTCA/F 4.1 mm 16 mm 06B-TC/SL 5.0 mm 16 mm 06B-TC/SL 15 Straight Transfer Coping Flared Transfer Coping Transfer Coping Screw Implant Analogs Impl. Ø mm Length Qty. Implant Analogs Material: Stainless Steel 4.1 mm 9 mm 1 06I-PIA 5.0 mm 9 mm 1 06WI-PIA Retaining Screws (replacement) Impl. Ø mm for use with hexed and UCLA abutments Titanium Alloy Replacement Screw Gold Alloy Replacement Screw 4.1/ 5.0 mm 05B-2RS 4.1/ 5.0 mm 05B-2RS/G All abutments are packaged with a titanium retaining screw.

16 ENDOPORE Internal hex Hexed s Impl. Ø mm Length Collar These abutments are used for cement retained crown or bridge restorations. Straight Hexed s Retaining screw included The straight hexed abutment has a parallel sided transgingival collar. 4.1 mm 7 mm 1.5 mm 05I-7FN 4.1 mm 9 mm 3.5 mm 05I-9FN 4.1 mm 11 mm 5.5 mm 05I-11FN 5.0 mm 7 mm 1.5 mm 05WI-7FN 5.0 mm 9 mm 3.5 mm 05WI-9FN 5.0 mm 11 mm 5.5 mm 05WI-11FN Length Collar 16 Flared Hexed s Retaining screw included The flared hexed abutment is designed for restorations requiring a natural emergence profile. 4.1 mm 8.5 mm 2 mm 05I-8.5UN 5.0 mm 8.5 mm 2 mm 05WI-8.5UN Collar Length Angled s Impl. Ø mm Length Angle Angled Hexed s Retaining screw included Angled abutments compensate for large divergences in implant alignment. Angled guide pins are available in the Prosthetic Instrumentation section of this catalog. 4.1 mm 11 mm 15 05I-15FA 4.1 mm 11 mm 25 05I-25FA 5.0 mm 11 mm 15 05WI-15FA 5.0 mm 11 mm 25 05WI-25FA 15 25

17 Internal hex BICORTICAL ENDOPORE UCLA s UCLA abutments provide a foundation to which wax can be added to shape a screwretained crown or bridge or a custom abutment. See the Prosthetic Instrumentation section for the lapping tool used to polish the cast surface that will mate with the implant. A reamer is also available to clean out the retaining screw hole in the casting. Gold base abutments have machined surfaces and will not require finishing with these tools. Hexed UCLA abutments should be used for custom abutments and for supporting crowns as they will resist the rotational forces associated with single tooth screw retained restorations. UCLA s Impl. Ø mm UCLA Plastic s Retaining screw included Hexed 4.1 mm 06I-UCLA/H 5.0 mm 06WI-UCLA/H Non-Hexed UCLA Gold Base s Non-Ceramic Alloy Retaining screw included Hexed 4.1 mm 06I-UCLA 5.0 mm 06WI-UCLA 4.1 mm 06I-UCLA/H/GNC 5.0 mm 06WI-UCLA/H/GNC 17 Non-Hexed 4.1 mm 06I-UCLA/GNC 5.0 mm 06WI-UCLA/GNC Important The melting range is 1,400 1,490 C (2,550 2,710 F), refer to package instructions for further details. UCLA Plastic Hexed UCLA Plastic Non-Hexed UCLA Gold Base Hexed UCLA Gold Base Non-Hexed

18 ENDOPORE Internal hex Overdenture Restorations Locator s Impl. Ø mm Collar 18 The Locator abutment is an attachment with a self-aligning feature. This feature will aid patients in seating their denture and eliminate additional wear from improper seating. With the Locator s minimal vertical height, it is ideal where interocclusal space is limited. This abutment can also accommodate up to 40 between implants. 4.1 mm 0 mm mm 1 mm mm 2 mm mm 3 mm mm 4 mm mm 5 mm mm 1 mm mm 2 mm mm 3 mm mm 4 mm mm 5 mm mm 6 mm 8169 Locator Attachments Locator Attachments Locator Male Processing Package 2 Sets, each Set includes: 1 Processing Replacement Male 8515, 1 Replacement Male 8524/ 8527/8529, 1 Spacer white Locator Replacement Male clear, 4 Pack Locator Light Retention Replacement Male pink, 4 Pack Locator Extended Range Replacement Male green, 4 Pack Locator Extra Light Extended Range Male red, 4 Pack Locator Black Processing Replacement Male 4 Pack Locator Extra Light Retention Replacement Male, blue, 4 Pack 8529 Locator Parallel Post 4 Pack 8517 Locator Impression Coping 4 Pack 8505 Locator Female Analog 4.1 mm Diameter. 4 Pack 5.0 mm Diameter. 4 Pack Locator Parallel Post Locator Impression Coping Female Analog Ø 4.1 mm Female Analog Ø 5.0 mm Angle Measurement Guide 9530 Angle Measurement Guide Locator Core Tool 8393 Locator Driver 15 mm length 21 mm length Ncm Torque Wrench 06-TW20

19 Internal hex BICORTICAL ENDOPORE O-Ring System (ORS) Impl. Ø mm Collar Length O-Ring System The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. The O-Ring abutment system can accommodate up to 5 degrees of divergence between implants. Each O-Ring System includes a titanium male abutment and an ORS lab kit which includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. Note Please refer to page 32 for O-Ring System. Ø mm 4 mm 04I-1ORS Ø mm 5 mm 04I-2ORS Ø mm 6 mm 04I-3ORS Ø mm 7 mm 04I-4ORS Ø mm 8 mm 04I-5ORS Ø mm 9 mm 04I-6ORS Ø mm 10 mm 04I-7ORS Ø mm 4 mm 04WI-1ORS Ø mm 5 mm 04WI-2ORS Ø mm 6 mm 04WI-3ORS Ø mm 7 mm 04WI-4ORS Ø mm 8 mm 04WI-5ORS Ø mm 9 mm 04WI-6ORS O-Ring Accessories O-Ring Lab Kit Metal Housing 06-ORS White O-Rings Package of 10 Dalla Bona System Impl. Ø mm Collar Length 06-O/ORS 19 Dalla Bona System The Dalla Bona abutment is a ball & socket type connector. Its spherical design allows up to 15 degrees divergence between the abutments. Each Dalla Bona System includes a titanium male abutment, a brass abutment analog, a titanium female with a PVC ring and a spacer. Note Please refer to page 33 for Dalla Bona System. Dalla Bona Accessories Dalla Bona Replacement Female Cap Includes a brass abutment analog, a titanium female with a PVC ring and a spacer. Ø mm 4 mm 04I-1DB Ø mm 5 mm 04I-2DB Ø mm 6 mm 04I-3DB Ø mm 7 mm 04I-4DB Ø mm 8 mm 04I-5DB Ø mm 9 mm 04I-6DB Ø mm 10 mm 04I-7DB Ø mm 4 mm 04WI-1DB Ø mm 5 mm 04WI-2DB Ø mm 6 mm 04WI-3DB Ø mm 7 mm 04WI-4DB Ø mm 8 mm 04WI-5DB Ø mm 9 mm 04WI-6DB Ø mm 10 mm 04WI-7DB Dalla Bona Activating Tool An instrument used to increase the retention of an attachment Dalla Bona Deactivating Tool An instrument used to reduce the retention of an attachment

20 ENDOPORE Internal hex UMA System Impl. Ø mm Collar UMA System s The UMA (Universal Modification ) system is used for screw retained restorations where it is desired to have the points of attachment superior to the soft tissue. Where there is insufficient clearance to use a UMA or when a sub-gingival separation is desired, a UCLA abutment can be used to achieve separation of the restoration at the implant level. The UMA is a transmucosal collar that should be secured to the implant with 30 Ncm of torque. The UMA screw used to secure the restoration to the abutment is packaged with each UMA plastic coping. A 0.05 hex driver is used to secure the screw which should only be tightened to 20 Ncm. Ø mm 02I-2.0UMA Ø mm 02I-3.0UMA Ø mm 02I-4.0UMA Ø mm 02I-5.0UMA Ø mm 02I-6.0UMA Ø mm 02I-7.0UMA Ø mm 02I-8.0UMA Ø mm 02WI-3.0UMA Ø mm 02WI-4.0UMA Ø mm 02WI-5.0UMA Ø mm 02WI-6.0UMA Note Please refer to pages for UMA System. 20

21 External hex BICORTICAL ENDOPORE Endopore Implants with external hex for one-stage and two-stage surgery Endopore Implants with external hex are compatible with a wide variety of prosthetic products for crown and bridge and overdenture restorations including UCLA, UMA, Dalla Bona, Overdenture and O-Ring Systems. All implants are packaged with colour coded labels that identify their diameters. All prosthetic components must be matched to the diameter of implant to which they are to be connected. labels have the same color coding as the corresponding implants. 21

22 ENDOPORE External hex Endopore Implants with external hex 22 The Endopore External Hex Connection implants are available in three diameters: 3.5 mm, 4.1 mm and 5.0 mm. A low profile cover screw is packaged with each implant. The 4.1 mm and 5.0 mm diameter are available with a 1 mm or 2 mm smooth coronal region. The 3.5 mm diameter implant is available in a 1 mm smooth coronal region. SCR* Length 3.5 mm diameter implant The 3.5 mm diameter implant is packaged in a red labeled box (01M-range). This implant has a 0.9 mm high x 2.0 mm flat-toflat hex and a UNF thread. 4.1 mm diameter implant The 4.1 mm diameter implants with the industry standard hex are packaged in green labeled boxes (01B-range). These implants have a 0.7 mm high x 2.7 mm flat-to-flat hex and a metric thread. 5.0 mm diameter implant The 5.0 mm diameter implants are packaged in turquoise labeled boxes (01WB-range). These implants have a 0.9 mm high x 2.7 mm flat-to-flat hex and metric thread. Diameter SCR* 1 mm Length SCR* Length Implant Ø 3.5 mm 1 mm 9 mm 01M-9I1 Implant Ø 4.1 mm * SCR Smooth Coronal Region Diameter Diameter SCR* 2 mm Length 1 mm 7 mm 01B-7I1 2 mm 7 mm 01B-7I2 1 mm 9 mm 01B-9I1 2 mm 9 mm 01B-9I2 1 mm 12 mm 01B-12I1 2 mm 12 mm 01B-12I2 Implant Ø 5.0 mm 1 mm 5 mm 01WB-5I1 1 mm 7 mm 01WB-7I1 2 mm 7 mm 01WB-7I2 1 mm 9 mm 01WB-9I1 2 mm 9 mm 01WB-9I2 1 mm 12 mm 01WB-12I1 2 mm 12 mm 01WB-12I2

23 External hex BICORTICAL ENDOPORE Case Planning Chart One- and twostage Surgery Flared Healing Straight Healing 23 Impression Stage Flared Transfer Coping Assembly Straight Transfer Coping Assembly Flared Hexed Angled Hexed Angled Hexed Straight Hexed Hexed UCLA Non-Hexed UCLA Laboratory Processing Final Restoration Crown Bridge

24 ENDOPORE External hex Case Planning Chart One- and twostage Surgery Straight Healing 24 Impression Stage Locator System O-Ring System Dalla Bona System Laboratory Processing Final Restoration Overdenture

25 External hex BICORTICAL ENDOPORE Case Planning Chart UMA Healing Cap One- and twostage Surgery Standard UMA System 25 Impression Stage Single Crown Bridge, Bar and Clip O-Ring Step 1 Step 1 Step 2 Step 2 Laboratory Processing Final Restoration Crown Bridge Bar Overdenture

26 ENDOPORE External hex Crown and Bridge Restorations Cover Screws Impl. Ø mm Cover Screw (replacement) A low profile cover screw is packaged with each implant. 3.5 mm 02M-CS 4.1 mm 02B-CS 5.0 mm 02WB-CS Healing s Impl. Ø mm Length Width 26 Straight Healing s The straight healing abutment is used in all situations except where an expanded gingival cuff is desired. Ø mm 3.5 mm 02M-3HS Ø mm 3.5 mm 02M-5HS Ø mm 3.5 mm 02M-7HS Ø mm 4.1 mm 02B-3HS Ø mm 4.1 mm 02B-5HS Ø mm 4.1 mm 02B-7HS Ø mm 5.0 mm 02WB-3HS Ø mm 5.0 mm 02WB-5HS Ø mm 5.0 mm 02WB-7HS Flared Healing s The use of a flared healing abutment allows the gingiva to heal around this expanded profile, where a more natural emergence profile is preferred. Ø mm 4.7 mm 02M-4H Ø mm 4.7 mm 02M-6.5H Ø mm 5.5 mm 02B-4H Ø mm 5.5 mm 02B-6.5H Ø mm 6.4 mm 02WB-4H Ø mm 6.4 mm 02WB-6.5H Width Width Length Length Straight Healing Flared Healing

27 External hex BICORTICAL ENDOPORE Transfer Copings Impl. Ø mm Length Width The shape of the transfer coping matches the shape of the corresponding healing abutment and this allows the profile of the gingival cuff to be accurately reproduced in the working model. Straight Transfer Copings for use with straight healing abutments Ø mm 3.5 mm 06M-CTCA/S Ø mm 3.5 mm 06M-CTCA/SL Ø mm 4.1 mm 06B-CTCA/S Ø mm 4.1 mm 06B-CTCA/SL Ø mm 5.0 mm 06WB-CTCA/S Ø mm 5.0 mm 06WB-CTCA/SL Flared Transfer Copings for use with flared healing abutments Ø mm 4.7 mm 06M-CTCA/F Ø mm 5.5 mm 06B-CTCA/F Ø mm 5.5 mm 06B-CTCA/FL Ø mm 6.4 mm 06WB-CTCA/F 27 Transfer Coping Screw, long for optional use with transfer copings, when an open tray technique is used Closed Impression Ø mm 06-TC/SL Ø mm 06B-TC/SL Ø mm 06B-TC/SL Straight Transfer Copings 11 mm Flared Transfer Copings 11 mm marking marking marking marking marking marking Ø 3.5 Ø 4.1 Ø 5.0 Ø 3.5 Ø 4.1 Ø 5.0 Open Impression Transfer Coping Screw for optional use 16 mm marking Ø 3.5 Ø 4.1 Ø 5.0

28 ENDOPORE External hex Implant Analogs Impl. Ø mm Length Qty. Implant Analogs Material: Aluminum Ø mm 1 06M-IA/1 Ø mm 5 06M-IA Ø mm 1 06B-IA/1 Ø mm 5 06B-IA Ø mm 1 06WB-IA/1 Ø mm 5 06WB-IA Implant Analog Material: Stainless Steel Ø mm 1 06M-PIA Ø mm 5 06M-PIA/5 Ø mm 1 06B-PIA Ø mm 5 06B-PIA/5 Ø mm 1 06WB-PIA Ø mm 5 06WB-PIA/5 28 Aluminum Stainless Steel Ø 3.5 Ø 4.1 Ø 5.0 Ø 3.5 Ø 4.1 Ø 5.0 Retaining Screws Impl. Ø mm Retaining Screw (replacement) for use with hexed and UCLA abutments Titanium Alloy Replacement Screw Ø 3.5 Ø 4.1/ RS 05B-2RS Gold Alloy Replacement Screw Ø 3.5 Ø 4.1/5.0 05M-2RS/G 05B-2RS/G All abutments are packaged with a titanium retaining screw.

29 External hex BICORTICAL ENDOPORE Hexed s Impl. Ø mm Length Collar These abutments are used for cement retained crown or bridge restorations. Straight Hexed s Retaining screw included The straight hexed abutment has a parallel sided transgingival collar. These abutments are available in both regular (grooved FS) and thick wall (not grooved FN) versions. Ø mm 1.5 mm 05M-7FS Ø mm 1.5 mm 05M-7FN Ø mm 3.5 mm 05M-9FN Ø mm 1.5 mm 05B-7FS Ø mm 1.5 mm 05B-7FN Ø mm 3.5 mm 05B-9FS Ø mm 3.5 mm 05B-9FN Ø mm 5.5 mm 05B-11FS Ø mm 5.5 mm 05B-11FN Ø mm 1.5 mm 05WB-7FS Ø mm 1.5 mm 05WB-7FN Ø mm 3.5 mm 05WB-9FS Ø mm 3.5 mm 05WB-9FN Ø mm 5.5 mm 05WB-11FS Ø mm 5.5 mm 05WB-11FN 29 Length Length Collar FN FS Flared Hexed s Retaining screw included The flared hexed abutment is designed for restorations requiring a natural emergence profile. These abutments are available in both regular (grooved UF) and thick wall (not grooved UN) versions. Ø mm 2 mm 05M-8.5UN Ø mm 2 mm 05M-9UF Ø mm 2 mm 05B-8.5UN Ø mm 2 mm 05B-10UF Ø mm 3.5 mm 05B-11.5UN Ø mm 1.5 mm 05WB-8.5UN Ø mm 1.5 mm 05WB-8UF Ø mm 3.5 mm 05WB-10.5UN Length Length Collar UN UF

30 ENDOPORE External hex Hexed s Impl. Ø mm Length Angle Angled Hexed s Retaining screw included Angled abutments compensate for large divergences in implant alignment. Angled guide pins are available in the Prosthetic Instrumentation section of this catalog, pages Ø mm 15 05M-15FA Ø mm 25 05M-25FA Ø mm 15 05B-15FA Ø mm 25 05B-25FA Ø mm 15 05WB-15FA Ø mm 25 05WB-25FA Temporary Titanium s Impl. Ø mm 30 Temporary s Retaining screw included Hexed Temporary Ø 3.5 Ø 4.1 Ø M-TEMP/H 05B-TEMP/H 05WB-TEMP/H Non-Hexed Temporary Ø 3.5 Ø 4.1 Ø M-TEMP 05B-TEMP 05WB-TEMP

31 External hex BICORTICAL ENDOPORE Crown and Bridge Restorations UCLA s UCLA abutments provide a foundation to which wax can be added to shape a screw-retained crown or bridge or a custom abutment. See the Prosthetic Instrumentation section for the lapping tool used to polish the cast surface that will mate with the implant. A reamer is also available to clean out the retaining screw hole in the casting. Gold base abutments have machined surfaces and will not require finishing with these tools. Hexed UCLA abutments should be used for custom abutments and for supporting crowns as they will resist the rotational forces associated with single tooth screw retained restorations. Non-hexed UCLA abutments should be used for supporting screw retained bridges. UCLA s Impl. Ø mm UCLA Plastic s Retaining screw included Hexed, green Hexed, yellow Hexed, blue Ø 3.5 Ø 4.1 Ø M-UCLA/H 06B-UCLA/H 06WB-UCLA/H 31 Non-Hexed, white Non-Hexed, white Non-Hexed, yellow Ø 3.5 Ø 4.1 Ø M-UCLA 06B-UCLA 06WB-UCLA Hexed Non-Hexed UCLA Gold Base s, metal alloy for porcelain fusing Retaining screw included Important The melting range is C ( F), refer to package instructions for further details. Hexed Ø 3.5 Ø 4.1 Ø M-UCLA/H/G 06B-UCLA/H/G 06WB-UCLA/H/G Non-Hexed Ø 3.5 Ø 4.1 Ø M-UCLA/G 06B-UCLA/G 06WB-UCLA/G Hexed Non-Hexed UCLA Gold Base s, alloy not for porcelain fusing Retaining screw included Hexed Gold Base UCLA Important The melting range is C ( F), refer to package instructions for further details. Ø 3.5 Ø 4.1 Ø M-UCLA/H/GNC 06B-UCLA/H/GNC 06WB-UCLA/H/GNC Non-Hexed Gold Base UCLA Ø 3.5 Ø 4.1 Ø M-UCLA/GNC 06B-UCLA/GNC 06WB-UCLA/GNC Hexed Non-Hexed

32 ENDOPORE External hex Overdenture Restorations Locator System Impl. Ø mm Collar 32 The Locator abutment is an attachment with a self-aligning feature. This feature will aid patients in seating their denture and eliminate additional wear from improper seating. With the Locator s minimal vertical height, it is ideal where interocclusal space is limited. This abutment can also accommodate up to 40 between implants. Note Please refer to pages 9 and 18 for Locator System and its components. 3.5 mm 1 mm mm 2 mm mm 3 mm mm 4 mm mm 0.73 mm mm 2 mm mm 3 mm mm 4 mm mm 1.35 mm mm 2 mm mm 3 mm mm 4 mm 8691 O-Ring System (ORS) Impl. Ø mm Collar Length O-Ring System The O-Ring abutment system can accommodate up to 5 degrees of divergence between implants. Each O-Ring System includes a titanium male abutment and an ORS lab kit which includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. Length Note The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. O-Ring Accessories O-Ring Lab Kit Metal Housing White O-Rings Package of 10 Collar Ø mm 4 mm 04M-1ORS Ø mm 5 mm 04M-2ORS Ø mm 6 mm 04M-3ORS Ø mm 7 mm 04M-4ORS Ø mm 8 mm 04M-5ORS Ø mm 4 mm 04B-1ORS Ø mm 5 mm 04B-2ORS Ø mm 6 mm 04B-3ORS Ø mm 7 mm 04B-4ORS Ø mm 8 mm 04B-5ORS Ø mm 9 mm 04B-6ORS Ø mm 10 mm 04B-7ORS Ø mm 4 mm 04WB-1ORS Ø mm 5 mm 04WB-2ORS Ø mm 6 mm 04WB-3ORS Ø mm 7 mm 04WB-4ORS Ø mm 8 mm 04WB-5ORS Ø mm 9 mm 04WB-6ORS 06-ORS O/ORS

33 External hex BICORTICAL ENDOPORE Dalla Bona System Impl. Ø mm Collar Length Dalla Bona System The Dalla Bona abutment is a ball & socket type connector. Its spherical design allows up to 15 degrees divergence between the abutments. Each Dalla Bona System includes a titanium male abutment, a brass abutment analog, a titanium female with a PVC ring and a spacer. Length Collar Dalla Bona Plus Accessories Ø mm 4 mm 04M-1DB Ø mm 5 mm 04M-2DB Ø mm 6 mm 04M-3DB Ø mm 7 mm 04M-4DB Ø mm 8 mm 04M-5DB Ø mm 9 mm 04M-6DB Ø mm 10 mm 04M-7DB Ø mm 4 mm 04B-1DB Ø mm 5 mm 04B-2DB Ø mm 6 mm 04B-3DB Ø mm 7 mm 04B-4DB Ø mm 8 mm 04B-5DB Ø mm 9 mm 04B-6DB Ø mm 10 mm 04B-7DB Ø mm 4 mm 04WB-1DB Ø mm 5 mm 04WB-2DB Ø mm 6 mm 04WB-3DB Ø mm 7 mm 04WB-4DB Ø mm 8 mm 04WB-5DB Ø mm 9 mm 04WB-6DB Ø mm 10 mm 04WB-7DB 33 Dalla Bona Plus Keeping the same benefits as the Dalla Bona System, the Dalla Bona Plus female attachment is a gold insert that can be easily replaced and adjusted with Dalla Bona Plus Activating/Deactivating Tool. Includes a brass abutment analog, a titanium cap with a gold female insert, and a spacer. Dalla Bona Plus Activating/Deactivating Tool An instrument used to increase and reduce the retention of an attachment Dalla Bona Accessories Dalla Bona Replacement Female Cap Includes a brass abutment analog, a titanium female with a PVC ring and a spacer Dalla Bona Activating Tool An instrument used to increase the retention of an attachment Dalla Bona Deactivating Tool An instrument used to reduce the retention of an attachment

34 ENDOPORE External hex UMA System Impl. Ø mm Collar 34 UMA System s The UMA (Universal Modification ) system is used for screw retained restorations where it is desired to have the points of attachment superior to the soft tissue. Where there is insufficient clearance to use a UMA or when a sub-gingival separation is desired, a UCLA abutment can be used to achieve separation of the restoration at the implant level. The UMA is a transmucosal collar that should be secured to the implant with 30 Ncm of torque. The UMA screw used to secure the restoration to the abutment is packaged with each UMA plastic coping. A 0.05 hex driver is used to secure the screw which should only be tightened to 20 Ncm. Standard UMA System The upper diameter for all UMA System s is 3.85 mm. Ø mm 02M-3.5UMA Ø mm 02M-4.5UMA Ø mm 02M-5.5UMA Ø mm 02M-6.5UMA Ø mm 02B-2.5UMA Ø mm 02B-3.0UMA Ø mm 02B-4.0UMA Ø mm 02B-5.0UMA Ø mm 02B-6.0UMA Ø mm 02B-7.0UMA Ø mm 02B-8.0UMA Ø mm 02WB-3.5UMA Ø mm 02WB-4.5UMA Ø mm 02WB-5.5UMA Ø mm 02WB-6.5UMA Collar UMA Healing Cap UMA Healing Cap 2 mm length UMA Transfer Copings UMA Hexed Transfer Coping Single tooth open tray UMA Guide Pin für UMA Non-Hexed Transfer Coping for bridge construction

35 External hex BICORTICAL ENDOPORE UMA Analogs Brass Stainless Steel UMA retaining screw included Brass Stainless Steel UMA Copings UMA Temporary Non-Hexed Coping UMA retaining screw included UMA Hexed Plastic Coping UMA retaining screw included blue UMA Non-Hexed Plastic Coping UMA retaining screw included yellow UMA Non-Hexed Gold Coping UMA retaining screw included /G UMA Temporary Non-Hexed Coping UMA Hexed Plastic Coping UMA Non-Hexed Plastic Coping UMA Non-Hexed Gold Coping 35 UMA Replacement Components UMA Non-Hexed Plastic Coping for Bar UMA Retaining Screw Gold Plated Bar Clip CM Rider UMA Hexed Plastic Coping UMA Retaining Srew Gold Plated Bar Clip UMA Bar Kit UMA Bar Kit Includes 4 bars, a spacer bar, 4 retaining screws, 4 plastic cylinders, and 4 gold plated clips UMA O-Ring System UMA O-Ring System Each abutment is packaged with an ORS lab kit that includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings Note The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture.

36 ENDOPORE Prosthetics Prosthetic Instrumentation Hex Driver, 0.05 extra short, 9 mm short, 13 mm long, 18 mm 06-HDXS 06-HDS 06-HDL 36 9 mm 13 mm 18 mm extra short short long 30 Ncm Torque Wrench 20 Ncm Torque Wrench For use with UMA System and Locator System (Ncm Newton centimeters) 06-TW30 06-TW20 Driver Housing Driver Extension Driver Housing Driver Extension Driver Tips fit Driver Housing and Torque Wrenches 0.05 Hex Tip 06-TWHT 0.05 Hex Tip Short 06-TWHTS UMA Driver ORS and Dalla Bona Driver Hex Tip 12.5 mm Hex Tip short 6.5 mm UMA Driver ORS-, Dalla Bona Driver

37 Prosthetics BICORTICAL ENDOPORE Prosthetic Instrumentation Latch Driver 0.05 Hex Latch Type Driver UMA Friction Grip Driver Friction driver for UMA non-hexed transfer coping and UMA O-Ring Guide Pin for angled abutment selection 15 angled 25 angled 06-15AAGP 06-25AAGP Reamer for use with UMA abutment castings for use with UCLA abutment castings REM Lapping Tool with guide pin for use with UMA and UCLA abutment castings and all platforms WP Waxing Sleeve 06-WS

38 ENDOPORE Surgery Surgery 38 Comprehensive Surgical Kit Surgical Instrument Tray, fully equipped 06-ITSTART Content of a full equipped tray 2.3 mm Round Bur 06-RB 2.5 mm Twist Drill short TDS 2.5 mm Twist Drill long TDL 3.5 mm Implant Bur, 9 mm 06M-9IB 4.1 mm Implant Bur, 7 mm 06-7IB 4.1 mm Implant Bur, 9 mm 06-9IB 4.1 mm Implant Bur, 12 mm 06-12IB 5.0 mm Implant Bur, 5 mm 06W-5IB 5.0 mm Implant Bur, 7 mm 06W-7IB 5.0 mm Implant Bur, 9 mm 06W-9IB 5.0 mm Implant Bur, 12 mm 06W-12IB Drill Extension 06-DE 3.5 mm Trial Fit Gage, 9 mm 06M-9TFG/O 4.1 mm Trial Fit Gage, 7 mm 06-7TFG/O 4.1 mm Trial Fit Gage, 9 mm 06-9TFG/O 4.1 mm Trial Fit Gage, 12 mm 06-12TFG/O 5.0 mm Trial Fit Gage, 5 mm 06W-5TFG/O 5.0 mm Trial Fit Gage, 7 mm 06W-7TFG/O 5.0 mm Trial Fit Gage, 9 mm 06W-9TFG/O 5.0 mm Trial Fit Gage, 12 mm 06W-12TFG/O Paralleling Pins, Pack of 4 06-PP Mallet 06-M/L Punch Handle, straight 06-H Punch Handle, offset 06-HOS Stainless Steel Punch Tip 06-PTM Tip Wrench 06-TW Hex Driver 0.05 short 06-HDS Radiographic Overlays, 2 Pack 06-RO Surgical Video on DVD 06-SV Endopore Surgical Kits for use with all Endopore Implants with internal connection, internal hex and external hex. Endopore Osteotome Kit Endopore Osteotome Kit Osteotome Instrument Tray, fully equipped Content of a full equipped tray Osteotome Tip #1 Osteotome Tip #2 Osteotome Tip #3 Stainless Steel Punch Tip Punch Handle, straight, Pack of 4 Punch Handle, offset, one Mallet Osteotome Instrument Tray, empty 06-OTKIT 06-OT1 06-OT2 06-OT3 06-PTM 06-H 06-HOS 06-M/L 06-ITM/S2 Surgical Instrument Tray, empty 06-ITM/S1

39 Surgery BICORTICAL ENDOPORE Endopore Surgical Instrumentation Burs and Drills Crestotom for the removal of soft tissue, for smoothing and levelling of the alveor crest Initial Perforation (IP) Drill for initial perforation of the compact cortical bone, Ø Round Bur Ø 2.3 mm Twist Drill short, Ø 2.5 mm, total length 30 mm 06-RB TDS 39 long, Ø 2.5 mm, total length 39 mm TDL Implant Burs Length Implant Burs for implant Ø 3.5 mm 9 mm 06M-9IB for implant Ø 4.1 mm 7 mm 06-7IB 9 mm 06-9IB 12 mm 06-12IB for implant Ø 5.0 mm 5 mm 06W-5IB 7 mm 06W-7IB 9 mm 06W-9IB 12 mm 06W-12IB

40 ENDOPORE Surgery Drill Extension Drill Extension 06-DE Trial Fit Gages/Osteotome Final Tips Length Trial Fit Gages/Osteotome Final Tips Implant Ø 3.5 mm 9 mm 06M-9TFG/O Implant Ø 4.1 mm 7 mm 06-7TFG/O 9 mm 06-9TFG/O 12 mm 06-12TFG/O 40 Implant Ø 5.0 mm The trial fit gages are threaded to connect to the punch handles. The trial fit gage corresponding to the size of the implant to be placed, acts as the final osteotome tip. 5 mm 06W-5TFG/O 7 mm 06W-7TFG/O 9 mm 06W-9TFG/O 12 mm 06W-12TFG/O Paralleling Pin Paralleling Pin for use with 2.5 mm twist drill 06-PP Mallet and Punch Handles Mallet 06-M/L Punch Handles for use in conjunction with osteotome tips and trial fit gages for osteotome technique straight offset 06-H 06-HOS straight offset

41 Surgery BICORTICAL ENDOPORE Punch Tips Stainless Steel Punch Tip for implant placement For use with all diameters. Connects to punch handle. 06-PTM Osteotome Punch Tips Osteotome punch tips connect to the punch handles. Osteotome Tip #1 Osteotome Tip #2 Osteotome Tip #3 06-OT1 06-OT2 06-OT3 Tip #1 Tip #2 Tip #3 Wrench and Driver Tip Wrench The tip wrench is used for tightening or loosening trial fit gages, punch tip and osteotome tips to the punch handles. 06-TW 41 Hex Driver 0.05 short length 13 mm 06-HDS 13 mm Cover Screw Trephines Cover Screw Trephines for implant Ø 3.5 mm for implant Ø 4.1 mm for implant Ø 5.0 mm Tissue Punch Tissue Punch The metal tissue punch attaches to the drill handpiece and will cleanly section a 4.3 mm diameter flap of tissue over the implant. 06M-3.5TR/CS TR/CS 06W-5.0TR/CS 06-TP

42 ENDOPORE Articles in alphabetic order Articles in alphabetic order Item Page Item Page 42 Angled s for - External Hex 30 - Internal Hex 16 Cementable s for Internal Connection 7 Cover Screw for - Internal connection 7 - Internal Hex 14 - External Hex 26 Cover Screw Trephines 41 Crestotom 39 Dalla Bona System for - Internal Connection 10 - Internal Hex 19 - External Hex 33 Drill Extension 40 Driver Extension 36 Driver Housing 8/10/36 Driver Tips 36 ECO System 7 Guide Pin 37 Healing s for - Internal Hex 14 - External Hex 26 Hex Driver 36/41 Hex Tip 0.05" 8/36 Hex Tip 0.05", short 36 Hex s for - Internal Hex 16 - External Hex 29/30 Implant Analogs for - Internal Hex 15 - External Hex 28 Implant Burs 39 Implants with - Internal Connection 4 - Internal Hex 11 - External Hex 22 Initial Perforation (IP) Drill 39 Insertion Tip 8 Latch Driver 37 Lapping Tool with guide pin 37 Locator s for - Internal Connection 9 - Internal Hex 18 - External Hex 32 Mallet 40 Octabutment System 8 O-Ring System (ORS) for - Internal Connection 10 - Internal Hex 19 - External Hex 32 Osteotome Instrument Tray, fully equipped 38 Paralleling Pin 40 Punch Handles 40 Punch Tips 41 Reamer 37 Retaining Screws 15/28 Round Bur 39 Surgical Instrument Tray, fully equipped 38 Temporary Titanium s 30 Tip Wrench 41 Tissue Punch 41 Torque Wrench 20 Ncm Ratchet 9/18/36 Torque Wrench 30 Ncm Ratchet 36 Transfer Copings for - Internal Hex 15 - External Hex 27 Trial Fit Gages/Osteotome Final Tips 40 Twist Drills 39 UCLA-s for - Internal Hex 17 - External Hex 31 UMA O-Ring System for External Hex 35 UMA System for - Internal Hex 20 - External Hex 34 UMA Driver 36 UMA Friction Grip Driver 37 Waxing Sleeve 37

43

44 ENDOPORE Implant Internal Connection Internal Hex Osteotome PROCEDURES perfect External Hex INTERNAL HEX PerfeCT SURFACE EXTERNAL HEX NTERNAL PERFECT SURFACE Implant Placement Procedure Innovative products PITT-EASY ENDOPORE BICORTICAL BIORESORB CYTOPLAST INNOVA ORALTRONICS ATTACHMENTS INTERNATIONAL A World of Implant Solutions The dental implant platform of Sybron Dental Specialties (SDS) brings together three organizations that have been leaders in implant manufacturing, design and development since the inception of implant dentistry. Delivering two of the most respected, leading-edge dental implants on the market ENDOPORE and PITT-EASY we are giving you access to a world of implant solutions. Manufacturer: Innova Corporation 522 University Ave Suite 1200 Toronto, ON M5G 1W7 Canada Distributed by: ORALTRONICS Dental Implant Technology GmbH Herrlichkeit Bremen Germany Phone Fax info@oraltronics.com : 06/07