NR Line Product Catalog

Transcription

1 NR Line Product Catalog

2 NR Line

3 Contents Introduction S.L.A. Surface 04 NR Line Characteristics 06 NR Line Color Coding by Diameter 08 NR Line Fixture 09 Surgical Components Cover Screw 10 Healing Abutment 11 Prosthetic Procedure 1 Dual Abutment - Abutment Level Impression 12 Dual Abutment [Double Square] 13 Dual Abutment [] 15 Abutment Level Impression Components 17 Prosthetic Procedure 2 Dual / Angled / Metal-Casting / Temporary Abutment - Fixture Level Impression 18 Fixture Level Impression Components 19 Angled Abutment [] 23 Metal Casting Abutment 24 Prosthetic Procedure 3 Screw Abutment - Abutment Level Impression 26 Screw Abutment 27 Screw Abutment Impression Components 28 Prosthetic Procedure 4 Mini Ball Attachment - Abutment Level Impression 30 Mini Ball Attachment 31 Prosthetic Procedure 5 Angled Overden ture - Fixture Level Impression 32 Angled Overden ture 33 Instruments Surgical Kit 34 PS Kit 35 Drill 36 Instrument 37 Prosthetic and Laboratory Instrument 39 Clinical Case 40

4 04 NR Line Product Catalog S.L.A. Surface S.L.A. (Sandblasting with large grit and acid etching) Higher bone-to-implant contact. Faster bone formation on the surface. In vivo test Bone Implant (S.L.A.) Bone Bone 400X 100X Fast new bone formation inside the thread. Human Osteoblast Well attached and proliferated human osteoblasts. 1250X 3000X Cell number 3x10 4, After 7 days of cell culture

5

6 06 NR Line Product Catalog NR Line Characteristics Abutment Ø Platform Ø Abutment Height Abutment Fixture Length Body Ø Selection Guideline Ø3.1 Ø4.3 Ø3.6 Ø4.3 Ø3.0 Ø3.0 Ø3.6 Ø3.6 Anterior (Maxilla, Mandibular) Premolar Premolar Molar

7 NR Line Product Catalog 07 NR Line Characteristics Narrow, but strong Body Ø3.0 fixture is very useful for narrow ridge. Platform Ø4.3 fixture is good for high occlusal stress. Simple GBR Minimize bone and gingival resorption Hybride zone for bone & soft tissue Compatible with bone & tissue level Stress free GBR Bone level Tissue level Extended thread design Firm & stable connection (Internal 10 taper & square shape) Extended thread design helps increase the initial stability. Less screw, abutment & fixture fracture 10 conical square connection between implant and abutment interface ensures tight sealing. Double square connection(octa) Abutment screw Ø1.9 hole size for occlusion. Prosthesis Various prosthetic options Ø2.3 Ø1.9 Ø1.9 SuperLine Dual Abutment NR Line Dual Abutment Ø1.6 Cover Screw Healing Abutment Dual Abutment Angled Abutment Metal Casting Abutment Temporary Abutment Screw Abutment Ball Angled Attachment Overdenture

8 08 NR Line Product Catalog NR Line Color Coding by Diameter Color Coding by Diameter Cover screw is not included in the packaging. (Unit: mm) Cap Color Yellow Yellow Green Green Fixture NR Line (Mount Free) PlatformØ Platform Diameter Body Diameter BodyØ Bevel Bevel Height

9 NR Line Product Catalog 09 NR Line Fixture Unit: mm, Scale 1 : 1.5 / mm Platform Ø 3.1 Body Ø 3.0 L Ø GFX 30 07S 9 GFX 30 09S L 11 GFX 30 11S 13 GFX 30 13S Ø 3.0 Platform Body Ø 3.0 L GFX 30 07W 9 GFX 30 09W L 11 GFX 30 11W 13 GFX 30 13W Ø 3.0 Platform Ø 3.6 Body Ø 3.6 L Ø GFX 36 07S 9 GFX 36 09S L 11 GFX 36 11S 13 GFX 36 13S Ø 3.6 Platform Body Ø 3.6 L GFX 36 07W 9 GFX 36 09W L 11 GFX 36 11W 13 GFX 36 13W Ø 3.6 Note: 1) To prevent damage to the Implant driver or fixture, do not over torque during fixture insertion

10 10 NR Line Product Catalog Cover Screw Unit: mm, Scale 1 : 1.5 / mm Ø 3.5 GCS36 and GFX3609S Cover Screw Application (Body Ø) Ø3.1 Ø3.5 Ø3.0S GCS30 Ø3.0W / Ø3.6S / Ø3.6W GCS36 Square driver: Use no more than 5N cm torque when screwing a cover screw to a fixture. If hex is worn, slot on the head of the product can be used to rotate it.

11 NR Line Product Catalog 11 Healing Abutment Single use only Unit: mm, Scale 1 : 1.5 / mm 2.0 H 3.0 Diameter Ø 3.7 GHAB and GFX3609S H GHAB GHAB GHAB Ø Ø Ø Ø GHAB Diameter H GHAB GHAB GHAB GHAB Diameter H GHAB GHAB GHAB GHAB Diameter Ø 6.0 H GHAB GHAB GHAB Ø Ø Ø Ø GHAB

12 12 NR Line Product Catalog Prosthetic Procedure 1 Impression Technique and Restoration Selection Dual Abutment Abutment Level Impression Closed Tray Technique Dual Abutment Double Square / Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 13, 14, 15, 16 Impression Coping (Burn-Out Cylinder, Comfort Cap, Abutment Holder) Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 17 Analog Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 17 Modification Cemented Restoration

13 NR Line Product Catalog 13 Dual Abutment [Double Square] Abutment screw is included. Unit: mm, Scale 1 : 1.5 / mm GDAB5225S and GFX3609S Diameter Ø 3.7 Double square 0.5 GDAB S 1.5 GDAB S 2.5 GDAB S 3.5 GDAB S 4.5 GDAB S 5.5 GDAB S Diameter Double square 0.5 GDAB S 1.5 GDAB S 2.5 GDAB S 3.5 GDAB S 4.5 GDAB S 5.5 GDAB S Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the dual abutment with fixture.

14 14 NR Line Product Catalog Dual Abutment [Double Square] Abutment screw is included. Unit:mm, Scale 1: 1.5 / mm Diameter Double square 0.5 GDAB S 1.5 GDAB S 2.5 GDAB S 3.5 GDAB S 4.5 GDAB S 5.5 GDAB S Diameter Ø 6.0 Double square 0.5 GDAB S 1.5 GDAB S 2.5 GDAB S 3.5 GDAB S 4.5 GDAB S 5.5 GDAB S Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the dual abutment with fixture.

15 NR Line Product Catalog 15 Dual Abutment [] Abutment screw is included. Unit: mm, Scale 1 : 1.5 / mm GDAB5225R and GFX3609S Diameter Ø GDAB R 1.5 GDAB R 2.5 GDAB R 3.5 GDAB R 4.5 GDAB R 5.5 GDAB R Diameter 0.5 GDAB R 1.5 GDAB R 2.5 GDAB R 3.5 GDAB R 4.5 GDAB R 5.5 GDAB R Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the dual abutment with fixture.

16 16 NR Line Product Catalog Dual Abutment [] Abutment screw is included. Unit:mm, Scale 1: 1.5 / mm Diameter 0.5 GDAB R 1.5 GDAB R 2.5 GDAB R 3.5 GDAB R 4.5 GDAB R 5.5 GDAB R Diameter Ø GDAB R 1.5 GDAB R 2.5 GDAB R 3.5 GDAB R 4.5 GDAB R 5.5 GDAB R Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the dual abutment with fixture.

17 NR Line Product Catalog 17 Abutment Level Impression Components Unit: mm, Scale 1 : 1 / mm Impression Coping Diameter Ø3.7 GADH 37 Ø4.3 GADH 43 Ø5.2 GADH 52 Ø6.0 GADH 60 Ø 3.7 Ø 6.0 Analog Diameter Ø3.7 GCAN 37 Ø4.3 GCAN 43 Ø5.2 GCAN 52 Ø6.0 GCAN 60 Ø 3.7 Ø 6.0

18 18 NR Line Product Catalog Prosthetic Procedure 2 Impression Technique and Restoration Selection Dual / Angled / Metal-Casting / Temporary Abutment Fixture Level Impression Open Tray Technique (Complication case) Closed Tray Technique (Simple case) Impression Coping Pick-up Double Square / Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Double Square Double Square Impression Coping Transfer Double Square / Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 19, 20 Page 21, 22 Analog Ø3.5 /Ø4.3 Page 20, 22 Dual Abutment Double Square / Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 13, 14, 15, 16 Angled Abutment 15 / 25 Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 23 Metal-Casting Abutment Double Square / Ø4.3 Page 24 Temporary Abutment Double Square / Ø4.3 Page 25 Modification Modification Cemented Restoration Cemented Restoration

19 NR Line Product Catalog 19 Fixture Level Impression Coping Impression coping screw is included with Impression coping. Unit:mm, Scale 1: 1.5 / mm Impression Coping Pick-up Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Size Type Short Double square GDPU S Short GDPU R Middle Double square GDPU S Middle GDPU R Long Double square GDPU S Long GDPU R 11.0 Double square Double square Double square Impression Coping Pick-up Size Type Short Double square GDPU S Short GDPU R Middle Double square GDPU S Middle GDPU R Long Double square GDPU S Long GDPU R 11.0 Double square Double square Double square Impression Coping Pick-up Size Type Short Double square GDPU S Short GDPU R Middle Double square GDPU S Middle GDPU R Long Double square GDPU S Long GDPU R Double square Double square Double square

20 20 NR Line Product Catalog Fixture Level Impression Coping Impression coping screw is included with Impression coping. Unit:mm, Scale 1: 1.5 / mm Impression Coping Pick-up Ø 6.0 Ø 6.0 Ø 6.0 Ø 6.0 Ø 6.0 Size Type Short Double square GDPU S Short GDPU R Middle Double square GDPU S Middle GDPU R Long Double square GDPU S Long GDPU R Double square Double square Ø 6.0 Ø Double square Impression Coping Pick-up Screw Size Short GDPS 11 Middle GDPS 13 Long GDPS 15 Short Middle Long Analog Ø 3.5 Application (Body Ø) Ø3.0S GDAN 30 Ø3.0W/ Ø3.6S / Ø3.6W GDAN

21 NR Line Product Catalog 21 Fixture Level Impression Coping Impression coping screw is included with Impression coping. Unit:mm, Scale 1: 1.5 / mm Impression Coping Transfer Ø 3.7 Size Type Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Ø 3.7 Short Double square GDTF S Short GDTF R Middle Double square GDTF S Middle GDTF R Long Double square GDTF S Long GDTF R Double square Double square Double square Impression Coping Transfer Size Type Short Double square GDTF S Short GDTF R Middle Double square GDTF S Middle GDTF R Long Double square GDTF S Long GDTF R Double square Double square Double square Impression Coping Transfer Size Type Short Double square GDTF S Short GDTF R Middle Double square GDTF S Middle GDTF R Long Double square GDTF S Long GDTF R Double square Double square Double square

22 22 NR Line Product Catalog Fixture Level Impression Coping Impression coping screw is included with Impression coping. Unit:mm, Scale 1: 1.5 / mm Impression Coping Transfer Ø 6.0 Ø 6.0 Ø 6.0 Ø 6.0 Ø 6.0 Size Type Short Double square GDTF S Short GDTF R Middle Double square GDTF S Middle GDTF R Long Double square GDTF S Long GDTF R Double square Double square Ø 6.0 Ø Double square Impression Coping Transfer Screw Size Short GDTS 11 Middle GDTS 13 Long GDTS 15 Short Middle Long Analog Ø 3.5 Application (Body Ø) Ø3.0S GDAN 30 Ø3.0W/ Ø3.6S / Ø3.6W GDAN

23 NR Line Product Catalog 23 Angled Abutment [] Abutment screw is included. Unit: mm, Scale 1 : 1.5 / mm GAAB154325R and GFX3609S Angled 15 Diameter Ø GAAB R Ø GAAB R Ø GAAB R Ø GAAB R Ø GAAB R Ø GAAB R Angled 25 Diameter Ø GAAB R Ø GAAB R Ø GAAB R Ø GAAB R Ø GAAB R Ø GAAB R Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the angled abutment with fixture.

24 24 NR Line Product Catalog Metal Casting Abutment Abutment screw is included. Unit: mm, Scale 1 : 1.5 / mm GRAB43CS and GFX3609S Metal-Casting Abutment Type 1.0 Double square GRAB 43 CS 1.0 GRAB 43 CR Double square Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the metal casting abutment with fixture.

25 NR Line Product Catalog 25 Temporary Abutment Abutment screw is included. Unit: mm, Scale 1 : 1.5 / mm GRAB43TS and GFX3609S Ti-Temporary Abutment Type 1.0 Double square GRAB 43 TS 1.0 GRAB 43 TR Double square Note: 1) If the NR Line fixture with size of Ø3.0 straight type is used, abutment height after assembly will become 1.0mm longer than other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the temporary a butment with fixture.

26 26 NR Line Product Catalog Prosthetic Procedure 3 Impression Technique and Restoration Selection Screw Abutment Abutment Level Impression Screw Abutment Ø4.3 /Ø5.2 Page 27 Open Tray Technique Closed Tray Technique Impression Coping Pick-up Ø4.3 /Ø5.2 Page 28 Impression Coping Transfer Ø4.3 /Ø5.2 Page 28 Analog Ø4.3 /Ø5.2 Page 29 Burn-out Cylinder Ø4.3 /Ø5.2 Page 29 Metal Cylinder Ø4.3 /Ø5.2 Page 29 Titanium Cylinder Ø4.3 /Ø5.2 Page 29 Polishing Protector Ø4.3 /Ø5.2 Temporary Restoration Page 28 Ti-Retaining Screw Page 29 Screw-Retained Restoration

27 NR Line Product Catalog 27 Screw Abutment Unit: mm, Scale 1 : 1.5 / mm 2.5 Delivery Holder GSAB4325 and GFX3609S Diameter 0.5 GSAB GSAB GSAB GSAB GSAB GSAB Diameter 0.5 GSAB GSAB GSAB GSAB GSAB GSAB Note: 1) The NR Line fixture with size of Ø3.0 straight type is not recommended to use with the screw abutment. Should they be used together, abutment height after assembly will become 1.0mm longer than the other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the screw abutment with fixture.

28 28 NR Line Product Catalog Screw Abutment Impression Components Unit: mm, Scale 1 : 1.5 / mm Impression Coping Pick-up Bridge Diameter Ø4.3 GSPU 43 Ø5.2 GSPU 52 Impression Coping Transfer Diameter Ø4.3 GSTF 43 Ø5.2 GSTF 52 Bridge Impression Coping Screw Type Pick-up GSPS 09 Transfer GSTS Comfort Cap Diameter Ø4.3 GSCC 43 Ø5.2 GSCC Polishing Protector Diameter Ø4.3 GSPP 43 Ø5.2 GSPP 52

29 NR Line Product Catalog 29 Screw Abutment Impression Components Unit:mm, Scale 1: 1.5 / mm Analog Diameter Ø4.3 GSAN 43 Ø5.2 GSAN Ti-Retaining Screw Ø 1.9 GSRS 16 T Ø 1.6 Ti-Cylinder Diameter Ø4.3 GSTC 43 Ø5.2 GSTC Burn-out Cylinder Diameter Ø4.3 GSBC 43 Ø5.2 GSBC Metal Cylinder Diameter Ø4.3 GSGC 43C Ø5.2 GSGC 52C

30 30 NR Line Product Catalog Prosthetic Procedure 4 Impression Technique and Restoration Selection Mini Ball Attachment Abutment Level Impression Mini Ball Abutment Ø4.3 Page 31 Mini Ball Impression Coping Page 31 Mini Ball Analog Ø4.3 Page 31 Socket Spacer Page 31 Mini Denture Socket Page 31 Mini O-ring Page 31

31 NR Line Product Catalog 31 Mini Ball Attachment Unit: mm, Scale 1 : 1.5 / mm Ø BPF3 and GBAB4325 and GFX3609S Mini Ball Abutment 1.5 GBAB GBAB GBAB GBAB GBAB Ø 1.8 Ø 1.8 Ø 1.8 Ø 1.8 Ø Mini Ball Impression Coping GICA Ø Mini Ball Analog GBANL Socket Spacer GBIC2L GBIC3L Female Socket BPF3 (300~500gf) BPF2 (500~700gf) Ø4.05 Ø (BFS3) (BNO1) (BFS2) (BNO2) (300~500gf) (500~700gf) Note: 1) The NR Line fixture with size of Ø3.0 straight type is not recommended to use with the screw abutment. Should they be used together, abutment height after assembly will become 1.0mm longer than the other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the mini ball abutment with fixture.

32 32 NR Line Product Catalog Prosthetic Procedure 5 Impression Technique and Restoration Selection Angled Overdenture Fixture Level Impression Open Tray Technique (Complication case) Colsed Tray Technique (Simple case) Double Square Double Square Impression Coping Pick-up Double Square / Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 19, 20 Impression Coping Transfer Double Square / Ø3.7 /Ø4.3 /Ø5.2 /Ø6.0 Page 21, 22 Analog Ø3.5 /Ø4.3 Page 20, 22 Base Abutment Double Square / 10 / 20 / 30 Ø4.3 Page 33 Mini Ball Cap Page 33 Screw Cap Page 33 Mini Denture Socket Page 31 Mini O-ring Page 31 Burn-out Cylinder Metal Cylinder Titanium Cylinder Ø4.3 /Ø5.2 Ø4.3 /Ø5.2 Ø4.3 /Ø5.2 Page 29 Page 29 Page 29

33 NR Line Product Catalog 33 Angled Overdenture Unit: mm, Scale 1 : 1.5 / mm GAOB4310 and GAOB432010S and GFX3609S GAOS4310 and GAOB432020S and GFX3609S Angled Overdenture Base Diameter Angle Ø GAOB S Ø GAOB R Double square Ø GAOB S Ø GAOB R Ø GAOB S Ø GAOB R Mini Ball Cap 1.0 GAOB GAOB GAOB Screw Cap 1.0 GAOS GAOS GAOS Healing Abutment 1.0 GAOC GAOC GAOC Angled Overdenture Screw GASC Ø 1.9 Ø Note: 1) The NR Line fixture with size of Ø3.0 straight type is not recommended to use with the screw abutment. Should they be used together, abutment height after assembly will become 1.0mm longer than the other sized fixtures. 2) It is recommended to keep the torque level at 20 N. cm to tighten the angled overdenture base with fixture.

34 34 NR Line Product Catalog Surgical Kit GXIK Kit Contents First guide drill GXLD Parallel pin x4 GXPP Final drill GXFH Hand-piece adapter GXID 30 H GXFH Ratchet adapter GXID 26 W Countersink GXCS S Path pin x2 GXMFPA GXCS W Square driver GXSD 25 W GXCS S GXSD 25 H GXCS W Drill extension XDE Depth gauge GXDGL Ratchet GXRCA

35 NR Line Product Catalog 35 PS Kit GXPS Kit Contents First guide drill GXLD Square Driver GXSD 15 W Final drill GXFH GXSD 21 W GXFH GXSD 28 W Stopper GXDST13 GXDST11 13 Adapter for S/B Abutment GXBSD 20H GXDST09 GXDST07 GXBSD 21W Torque Wrench GXNTW

36 36 NR Line Product Catalog Drill Unit: mm, Scale 1 : 1 / mm First Guide Drill Diameter L Ø GXLD Ø GXLD Ø 2.2 Ø Final Drill Diameter L Ø GXFH Ø GXFH Ø GXFH Ø GXFH Ø 2.6 Ø 3.15 Ø 2.6 Ø Countersink Diameter L Ø GXCS S Ø GXCS W Ø GXCS S Ø GXCS W Ø 3.1 Ø Stopper Drilling Depth L GXDST GXDST GXDST 09 Ø Ø Ø Ø GXDST 07 Note: Drill speed 1,000rpm, 30~45N. cm with irrigation.

37 NR Line Product Catalog 37 Instrument Unit: mm, Scale 1 : 1 / mm Adapter Type L 27 GXID 27 H Hand-piece 30 GXID 30 H 32 GXID 32 H 24 GXID 24 W Ratchet 26 GXID 26 W 29 GXID 29 W Parallel Pin Diameter L Ø GXPP Ø 1.6 Path Pin L 17.3 GXMFPA 17.3

38 38 NR Line Product Catalog Instrument Unit: mm, Scale 1 : 1 / mm Square Driver Type L Hand-piece 25 GXSD 25 H GXSD 15 W Ratchet 21 GXSD 21 W 25 GXSD 25 W GXSD 28 W Drill Extension XDE 26 Adapter for Screw & Ball Abutment Type Hand-piece Ratchet GXBSD20H GXBSD21W Ratchet GXRCA Torque Wrench Scale 1 : 0.7 / mm GXNTW Depth Gauge GXDGL Note: One side of Depth Gauge measures the osteotomy depth and the other side measures the gingival height from the top of the implant.

39 NR Line Product Catalog 39 Prosthetic and Laboratory Instrument Unit:mm, Scale 1: 1.5 / mm Reamer Guide for Dual Abutment GDRG 37 GDRG 43 GDRG 52 GDRG 60 Reamer Guide for Screw Abutment GSRG Reamer GSRM Reamer Handle CRH

40 NR Line Clinical Case

41 NR Line Product Catalog 41 Implantation on Narrow Ridge NR Line in narrow ridge (simple GBR) First guide drill Final drill Final drill Fixture installation NR Line 3609S Cover screw connection Application of graft material OSTEON ll Collagen Healing Dual abutment connection Final prosthesis

42 42 NR Line Product Catalog NR Line Clinical Case Case 1 Pre-op Application of NR Line OSTEON Ⅱ + OSTEON Ⅱ Collagen Suture Healing: 1 month Case 2 Pre-op Application of NR Line OSTEON Ⅱ + OSTEON Ⅱ Collagen Suture Healing: 2 weeks

43 NR Line Product Catalog 45 NR Line Clinical Case Case 3 Extraction Application of NR Line OSTEON Ⅱ Healing : 2 weeks Impression Final prosthesis Case 4 Extraction Application of NR Line OSTEON Ⅱ Collagen Collagen Membrane Suture Healing: 1 month 2 weeks

44 NR Line Product Catalog Specifications are subject to change without prior notice. Some products that are to be launched in the market after necessary approvals are also listed in this catalog. HEAD OFFICE NRPC-1306 [Rev.1] 3105 Trade Tower, 513 Yeongdong-daero, Gangnam-gu, Seoul, Korea T F HOMEPAGE