PERFORMANCE, SIMPLICITY, FLEXIBILITY. The new dimension PROSTHETIC RANGE CATALOG AXIOM FED. simeda. customized & solutions

Transcription

1 PERFORMANCE, SIMPLICITY, FLEXIBILITY The new dimension simeda customized & solutions PROSTHETIC RANGE CATALOG AXIOM FED

2 2 a Contents: Axiom FED prosthetic solutions PROSTHETIC COMPONENTS PACKAGING P. 4 ANTHOGYR SERENITY WARRANTY P. 5 PROSTHETIC COMPONENTS P. 6 Axiom REG/PX prosthetic range P. 7 Axiom 2.8 prosthetic range P. 23 CAD-CAM PROSTHETIC COMPONENTS P. 26 PROSTHETIC INSTRUMENTS P. 28 RECOMMENDED TIGHTENING TORQUES P. 29 LIST OF MATERIALS P. 30 SINGLE-UNIT RESTORATION GED CEMENT-RETAINED PROSTHESIS GE SCREW-RETAINED PROSTHESIS GE CEMENT-RETAINED PROSTHESIS B Esthetic TITANIUM abutments P. 11 FLEXIBASE P. 22 Temporary PEEK abutments P. 24 CERECBASE Esthetic ZIRCONIA abutments P. 13 Temporary TITANIUM abutments P. 10 TITANIUM abutments P. 25 Standard TITANIUM abutments P. 14 Gold cast-on abutment P. 22 Gold cast-on abutment P. 22 Reworkable abutment P. 22

3 PROSTHETIC SOLUTIONS AXIOM FED 3 STANDARD PROSTHETIC COMPONENTS GED P. 6 CAD-CAM PROSTHETIC COMPONENTS GE simeda customized & solutions P. 26 MULTIPLE-UNIT RESTORATION GE REMOVABLE FULL-ARCH RESTORATION GE CEMENT-RETAINED PROSTHESIS GE SCREW-RETAINED PROSTHESIS GE LOCATOR ATTACHMENTS GE P. 20 Esthetic TITANIUM abutments Standard TITANIUM abutments P. 11 P. 14 Ø 4.8 mm Multi-Unit abutments Secondary parts P. 16 Ø 4.0 mm Narrow Multi-Unit abutments Secondary parts P. 18 P. 17 P. 18 Gold cast-on abutment P. 22 Reworkable abutment P. 22 Pacific P. 18

4 4 a Packaging of prosthetic components 2 color codes for three new clear blisters: w s supplied Q: - Fewer intra-oral handlings. - Intra-operative time saving. w Rapid identification of each prosthetic component*. w 4 traceability labels*: - Better data transmission between practitioners involved in the patient prosthetic rehabilitation. - Optimized treatment and patient record. BLUE BLISTER (STERILE) Examples: standard titanium abutments, healing screws, Multi-Unit abutments COLORLESS BLISTER (NON-STERILE) Examples: esthetic titanium abutments, titanium temporary copings. OTHER COLORLESS BLISTER (NON-STERILE) Examples: transfers, analogs, wrenches, drills. * Other colorless blister (non-sterile) excluded.

5 PROSTHETIC SOLUTIONS AXIOM FED 5 Meaning of the symbols on blisters with traceability: SEALING LID Red: sterile Name and address of manufacturer See instructions for use Do not use if packaging damaged Do not re-use (disposable device) EXAMPLE OF REPOSITIONABLE TRACEABILITY LABELS w Easy, intuitive reading of the product s. w Optimized component storage. 4 detachable labels 1 Article number Batch number range Catalogue Batch number Recommended tightening torque Date of manufacture Non sterile product Compliant with EEC Directive 93/42 Manufacturer Component type (designation) Catalogue Batch number Pictogram for indexed connection Component pictogram 1 Availability depending on the range

6 6 a Prosthetic components Choice of the prosthetic component diameter PROSTHETIC DIAMETER ACCORDING TO THE TOOTH TO BE RESTORED Recommended emergence diameter for Axiom REG/PX/2.8 *Mesio-distal width in mm central incisor lateral incisor canine Maxilla 1 st premolar d premolar st molar d molar central incisor lateral incisor canine Mandible 1 st premolar d premolar st molar d molar *Source: Lavergne, Bulletins et Mémoires de la Société d Anthropologie de Paris, vol 1, serie XIII, 1974, if mesio-distal space limited in first intention other possibility Meaning of the symbols used in this document: Ch: coronal height Gh: gingival height from implant neck H: height on label Ø: diameter ά: angulation of the prosthetic component Ht: height of platform

7 PROSTHETIC SOLUTIONS AXIOM FED 7 Axiom FE prosthetic components Ø HEALING SCREWS Ch = 2 mm Ø Ch = 1 mm Manual w Supplied Q for single-use. w Low coronal height (1 mm) available for placement under removable prosthesis. Gh Gh < 10 Diameter in mm Gingival height (Gh) Coronal height (Ch) = 2 mm Coronal height (Ch) = 1 mm 1.5 mm OPHS310 OPHSF310 Ø 3.4 Ø 4.0 Ø 5.0 Ø mm OPHS320 OPHSF mm OPHS330 OPHSF mm OPHS340 OPHSF mm OPHS400 OPHSF mm OPHS410 OPHSF mm OPHS420 OPHSF mm OPHS430 OPHSF mm OPHS440 OPHSF mm OPHS500 OPHSF mm OPHS510 OPHSF mm OPHS520 OPHSF mm OPHS530 OPHSF mm OPHS540 OPHSF mm OPHS610 OPHSF mm OPHS620 OPHSF mm OPHS630 OPHSF mm OPHS640 OPHSF640 LASER MARKING ON SCREW HEAD Gh (mm) H (mm) Ø 3.4 Ø 4.0 Ø 5.0 diameter gingival height Recommended suture level 4 F "F" if Ch = 1 mm Coronal height 1 mm or 2 mm Gingival height 0.75 / 1.5 / 2.5 / 3.5 and 4.5 mm. Ø 6.0 A marking "F" is added for screws of Ch = 1 mm This figure shows a healing screw with 2.5 GH and a 2 mm CH

8 8 a IMPLANT-LEVEL IMPRESSION TAKING Components Pick-up transfer - short Short and long pick-up screws included Body lenght 10 mm OPPU100 (unitary) OPPU100-4 (by 4) NEW DESIGN PICK-UP TECHNIQUE Transfer pick-up - long Long and extra-long pick-up screws included Body lenght 14 mm OPPU100L (unitary) OPPU100L-4 (by 4) NEW Short Pick-up screw Long Pick-up screw Extra-long Pick-up screw OPPU101 OPPU102 OPPU102L NEW Manual M1.6 titanium screw OPTS161 Impression rings for Pick-up OPROFIL410 / 420 / 430 OPROFIL510 / 520 / 530 (by 4) NEW POP-IN TECHNIQUE Pop-in transfer - short Pop-in screw included Body lenght 10 mm Pop-in transfer - long Pop-in screw included Body lenght 14 mm OPPI100S (unitary) OPPI100S-4 (by 4) OPPI100 (unitary) OPPI100-4 (by 4) IMPLANT ANALOG Implant analog M1.6 screw included (Ref.: OPTS161) OPIA100 (unitary) OPIA100-4 (by 4) STANDARD TITANIUM ABUTMENT-LEVEL IMPRESSION TAKING w Impression taking technique reducing intra-oral handlings. w Standard titanium abutments are supplied Q (Cf. page 13). Components STANDARD abutment transfer STANDARD abutment analog Ch 4 mm Ø 3.4 Ø 4.0 Ø 5.0 Ø 6.0 OPTT100 (unitary) OPTT100-5 (by 5) OPSA304 OPSA404 OPSA504 OPSA604 STANDARD abutment analog Ch 6 mm OPSA306 OPSA406 OPSA506 OPSA606

9 PROSTHETIC SOLUTIONS AXIOM FED 9 TRY-IN ABUTMENTS ά w Medical titanium. w Tri-lobed indexation. Ø = 4 mm Ch = 7 mm Gh Gingival height (Gh) 0.75 mm 1.5 mm 2.5 mm 3.5 mm 4.5 mm Angulation (ά) OPSF006 7 OPAF OPAF OPAF002 OPSF016 7 OPAF OPAF OPAF012 OPSF026 7 OPAF OPAF OPAF022 OPSF036 7 OPAF OPAF OPAF032 OPSF046 7 OPAF OPAF OPAF042

10 10 a TITANIUM TEMPORARY ABUTMENTS Manual Temporary single-unit restoration w Retention grooves. w With tri-lobed indexation. w Supplied Q. w Reworkable. Ø Ch = 9 mm Gh Laboratory screw OPTS SUPPLIED WITH M1.6 titanium screw OPTS161 Diameter in mm Ø 3.4 Ø 4.0 Ø 5.0 Ø 6.0 Gingival height (Gh) 1.5 mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP mm OPTP640

11 PROSTHETIC SOLUTIONS AXIOM FED 11 ESTHETIC TITANIUM ABUTMENTS ά Ch = 7 mm Single-Unit or multiple-unit restoration on Axiom REG/PX implants w 56 components available. w Esthetic abutment shoulder. w Tulip-shaped gingival profile for abutments with gingival height from 0.75 to 3.5 mm. Removable Ø Gh 25 M1.6 Black Tite permanent screw OPTS160 SUPPLIED WITH w Specific gingival profile for abutments with gingival height 4.5 mm (cf. "Particular case" hereafter). w Tri-lobed indexation. w Abutment disconnector/gripper, ref. INEXPL and INEXPS, usable with product s having "Removable" mention on label. Body + Disconnecting rod Manual M1.6 titanium screw OPTS161 Diameter in mm Gingival height (Gh) Angulation (ά) Ø mm 2.5 mm 3.5 mm 4.5 mm 7 OPAT OPAT311 7 OPAT OPAT321 7 OPAT OPAT331 7 OPAT OPAT341 OPAT mm 7 OPAT OPAT OPAT402 OPAT mm 7 OPAT OPAT OPAT412 OPAT420 Ø mm 7 OPAT OPAT OPAT422 OPAT mm 7 OPAT OPAT OPAT432 OPAT mm 7 OPAT OPAT OPAT442

12 12 a Diameter in mm Gingival height (Gh) Angulation (ά) OPAT mm 7 OPAT OPAT OPAT502 OPAT mm 7 OPAT OPAT OPAT512 OPAT520 Ø mm 7 OPAT OPAT OPAT522 OPAT mm 7 OPAT OPAT OPAT532 OPAT mm 7 OPAT OPAT OPAT mm OPAT OPAT611 Ø mm 3.5 mm OPAT OPAT621 OPAT OPAT mm OPAT OPAT641 PARTICULAR CASE: Gingival height 4.5 mm esthetic TITANIUM abutments have a specific gingival profile to be used in the following situations: w Gingival height of 4.5 mm and coronal height of 7 mm. w Gingival height of 2.5 mm and coronal height of 9 mm. w In order to obtain this abutment with a coronal height of 9 mm, w the laboratory should rework the 2 mm cylindrical part. 2 mm 2.5 mm 7 mm 4.5 mm

13 PROSTHETIC SOLUTIONS AXIOM FED 13 ESTHETIC ZIRCONIA ABUTMENTS* Single-unit cement-retained restoration on Axiom REG/PX implants in anterior or posterior region 25 SUPPLIED WITH w Theses abutments consist of following two pieces bonded together: titanium base and coronal part made of Sina Z zirconia. w Esthetic abutment shoulder. w Tri-lobed indexation. w The rework needed is minimal (for more information: see Axiom REG/PX surgical guide). Ø ά Ch = 7 mm Gh M1.6 Black Tite definitive screw OPTS160 Manual M1.6 titanium screw OPTS161 Diameter in mm Gingival height (Gh) Angulation (ά) Ø mm 3.5 mm OPAZ OPAZ511 OPAZ OPAZ531 *Not available in all countries. Please contact your Anthogyr local representative.

14 14 a STANDARD TITANIUM ABUTMENTS Single-unit or multiple-unit restorations w 36 components available. w Supplied Q for an immediate placement: - reduce intra-oral handlings. - preserve soft tissues. w Dedicated secondary components: - Specific transfers and analogs (Cf. page 8). - Castable copings for single-unit or multiple-unit restoration, no rework necessary. - Protective caps. w Abutment disconnector/gripper, ref. INEXPL and INEXPS, usable with product s having «Removable» mention on label. Removable Ø ά Body + Disconnecting rod Ch Gh 25 M1.6 Black Tite definitive screw OPTS160 Manual M1.6 titanium screw OPTS161 SUPPLIED WITH STRAIGHT STANDARD TITANIUM ABUTMENTS: w With tri-lobed indexation. w Available in 2 coronal heights: 4 and 6 mm w Single-unit or multiple-unit restoration. Diameter in mm Ø 3.4 Ø 4.0 Ø 5.0 Ø 6.0 Gingival height (Gh) Coronal height (Ch) = 4 mm 1.5 mm OPST314 OPST mm OPST324 OPST mm OPST334 OPST mm OPST414 OPST mm OPST424 OPST mm OPST434 OPST mm OPST514 OPST mm OPST524 OPST mm OPST534 OPST mm OPST614 OPST mm OPST624 OPST mm OPST634 OPST636 Coronal height (Ch) = 6 mm STANDARD TITANIUM ABUTMENT-LEVEL IMPRESSION TAKING: Components STANDARD abutment transfer STANDARD abutment analog Ch 4 mm STANDARD abutment analog Ch 6 mm Ø 3.4 Ø 4.0 Ø 5.0 Ø 6.0 OPTT100 (unitary) OPTT100-5 (by 5) OPSA304 OPSA404 OPSA504 OPSA604 OPSA306 OPSA406 OPSA506 OPSA606

15 PROSTHETIC SOLUTIONS AXIOM FED 15 ANGLED STANDARD TITANIUM ABUTMENTS: w Without tri-lobed indexation. w Multi-unit restoration. w Coronal height 6 mm. Diameter in mm Gingival height (Gh) Angulation (ά) 1.5 mm 15 OPST416_15 23 OPST416_23 Ø mm 15 OPST426_15 23 OPST426_ mm 15 OPST436_15 23 OPST436_ mm 15 OPST516_15 23 OPST516_23 Ø mm 15 OPST526_15 23 OPST526_ mm 15 OPST536_15 23 OPST536_23 SECONDARY PARTS FOR STANDARD TITANIUM ABUTMENTS: w PEEK protective cap and castable coping for single-unit and multiple-unit restoration. Diameter in mm Coronal height (Ch) PEEK protective cap PMMA castable coping Single-unit Anti-rotational Multiple-unit Rotational Ø 3.4 Ø 4.0 Ø 5.0 Ø mm OPPC304 OPCA304 OPCR304 6 mm OPPC306 OPCA306 OPCR306 4 mm OPPC404 OPCA404 OPCR404 6 mm OPPC406 OPCA406 OPCR406 4 mm OPPC504 OPCA504 OPCR504 6 mm OPPC506 OPCA506 OPCR506 4 mm OPPC604 OPCA604 OPCR604 6 mm OPPC606 OPCA606 OPCR606

16 16 a Ø 4.8 mm MULTI-UNIT ABUTMENTS Multiple-unit or full-arch restorations screw-retained on Axiom REG/PX implants w Straight AND angled abutments with common secondary parts. w Supplied Q with pre-assembled prehensile tool. w The secondary parts are yellow coded. 15 Ø = 4.8 mm Ch = 2.5 mm Gh 25 Ch = 2.5 mm Hmax* ά Ø = 4.8 mm Gh M1.4 MU Black Tite définitive screw MU M1.6 MU Black Tite définitive screw OPMU160 Ø 4.8 mm Multi-Unit abutments Angulation (ά) Gingival height (Gh) 0.75 mm OPMU0-0 Non-indexed straight abutment Supplied with pre-assembled prehensile tool mm OPMU mm OPMU mm OPMU mm OPMU0-4 Indexed 18 angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite definitive screw mm OPMU18-1 IN 2.5 mm OPMU18-2 IN 3.5 mm OPMU18-3 IN Indexed 30 angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite definitive screw mm OPMU30-0 IN 1.5 mm OPMU30-1 IN 2.5 mm OPMU30-2 IN 3.5 mm OPMU30-3 IN Non-indexed 18 angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite definitive screw mm OPMU mm OPMU mm OPMU18-3 Non-indexed 30 angled abutment Supplied with pre-assembled prehensile tool and M1.6 MU Black Tite definitive screw mm OPMU mm OPMU mm OPMU mm OPMU30-3 *Hmax = Gh mm for 18 angled abutments. Hmax = Gh mm for 30 angled abutments.

17 PROSTHETIC SOLUTIONS AXIOM FED 17 Ø 4.8 MM MULTI-UNIT SECONDARY COMPONENTS ( YELLOW -CODED): Components Titanium Multi-Unit protective cap Supplied Q MUCAP (unitary) MUCAP-4 (by 4) Manual Titanium temporary coping Supplied with M1.4 MU titanium screw MUC PROSTHETIC PARTS FOR Ø 4.8 mm MULTI-UNIT ABUTMENTS PEEK temporary coping Supplied with M1.4 MU titanium screw Definitive castable coping Supplied with M1.4 MU Black Tite definitive screw MUC200 MUC Definitive CoCr** cast-on coping Supplied with M1.4 MU Black Tite definitive screw NEW MUC IMPRESSION TAKING ON Ø 4.8 mm MULTI-UNIT ABUTMENTS pick-up technique (open tray) or pop-in technique (closed tray) Multi-Unit Pick-up transfer Supplied with a short (yellow) and a long (yellow) pick-up screw. Multi-Unit pop-in transfer Multi-Unit abutment analog Supplied with M1.4 MU laboratory blue screw MUT100 (unitary) MUT100-4 (by 4) MUT200 (unitary) MUT200-4 (by 4) MUA100 (unitary) MUA100-4 (by 4) OTHER PROSTHETIC COMPONENTS FOR Ø 4.8/4.0 MM MULTI-UNIT ABUTMENTS (THE LABORATORY SCREWS ARE BLUE CODED): Components Ø 4.8/4.0 mm MULTI-UNIT PROSTHETIC SCREWS M1.6 MU Black Tite definitive screw M1.6 MU blue screw (x1) M1.6 MU blue screw (x4) M1.4 MU Black Tite definitive screw M1.4 MU zirconia prosthesis M1.4 MU blue screw Multi-Unit laboratory screw - short Multi-Unit laboratory screw - long OPMU160 OPMU161 OPMU161-4 MU140 MU140Z MU141 MUT101 MUT102 Ø 4.8/4.0 mm MULTI-UNIT PROTECTIVE ANALOG Ø 4.8/4.0 mm PREHENSILE TOOL Ø 4.8 mm Multi-Unit protective analog (steel) Ø 4.0 mm Multi-Unit protective analog (steel) Short prehensile tool for Multi-Unit abutment MUA200 (unitary) MUA200-4 (by 4) MUNA200 MUWS **CoCr: Cobalt Chromium.

18 18 a Ø 4.0 MM NARROW MULTI-UNIT ABUTMENTS Multiple-unit or full-arch restorations screwed on axiom REG/PX implants presenting a limited inter-implant distance w Narrow straight abutments with specific secondary components. w Supplied Q with pre-assembled prehensile tool. w The secondary parts are green or N [Narrow] coded. Ø = 4.0 mm Ch = 1.5 mm Gh 15 Gingival height (Gh) 0.75 mm OPMUN M1.4 MU Black Tite definitive screw MU mm OPMUN mm OPMUN mm OPMUN mm OPMUN0-4 Ø 4.0 MM NARROW MULTI-UNIT SECONDARY COMPONENTS ( N OR GREEN CODED): Components Narrow Multi-Unit protective cap (titanium) Supplied Q MUNCAP Manual PROSTHETIC PARTS FOR NARROW MULTI-UNIT ABUTMENTS (Ø 4.0 MM) Narrow Multi-Unit temporary coping (titanium) Narrow Multi-Unit temporary coping (titanium) Narrow Multi-Unit PEEK temporary coping Supplied with definitive M1.4 MU Black Tite screw Narrow Multi-Unit definitive castable coping Supplied with definitive M1.4 MU Black Tite screw MUNC100 MUNC200 MUNC Narrow Multi-Unit definitive CoCr* cast-on coping (narrow Multi-Unit) Supplied with M1.4 MU Black Tite definitive screw NEW MUNC PROSTHETIC PARTS FOR RESTORATIONS WITH PACIFIC ON NARROW MULTI-UNIT ABUTMENTS (Ø 4.0 MM) PACIFIC bonding ring (narrow Multi-Unit) Supplied with M1.4 MU Black Tite screw PACIFIC analog (narrow Multi-Unit) Supplied with M1.4 MU screw and long laboratory blue screw Castable PACIFIC coping (narrow Multi-Unit) Supplied with M1.4 MU laboratory blue screw PACIFIC Kit Containing References = MUNPAC100/110/120 MUNPAC100 MUNPAC110 MUNPAC120 KITMUNPAC - * CoCr: Cobalt Chromium.

19 PROSTHETIC SOLUTIONS AXIOM FED 19 Components IMPRESSION TAKING ON Ø 4.0 mm NARROW MULTI-UNIT ABUTMENTS Pick-up transfer for narrow Multi-Unit Supplied with a short (green) and a long (green) pick-up screw. Pop-in transfer for narrow Multi-Unit Narrow Multi-Unit Abutment analog supplied with M1.4 MU blue screw MUNT100 (unitary) MUNT100-4 (by 4) MUNT200 (unitary) MUNT200-4 (by 4) MUNA100 (unitary) MUNA100-4 (by 4) OTHER PROSTHETIC COMPONENTS FOR MULTI-UNIT ABUTMENTS Ø 4.8 AND 4.0 MM (THE LABORATORY SCREWS ARE BLUE CODED: Components M1.6 MU Black Tite definitive screw M1.6 MU blue screw (x1) M1.6 MU blue screw (x4) OPMU160 OPMU161 OPMU161-4 Ø 4.8/4.0 mm MULTI-UNIT PROSTHETIC SCREWS M1.4 MU Black Tite definitive screw M1.4 MU zirconia prosthesis M1.4 MU blue screw Multi-Unit laboratory screw - short Multi-Unit laboratory screw - long MU140 MU140Z MU141 MUT101 MUT102 Ø 4.8/4.0 mm MULTI-UNIT PROTECTIVE ANALOG Ø 4.8/4.0 mm PREHENSILE TOOL Ø 4.8 mm Multi-Unit protective analog (steel) Ø 4.0 mm Multi-Unit protective analog (steel) Short prehensile tool for Multi-Unit abutment MUA200 MUNA200 MUWS

20 20 a LOCATOR ATTACHMENTS Stabilization of removable implantsupported partial restoration, overdenture stabilization. w Locator attachments (Clear, Pink, Blue) can correct divergence up to 20 between two implants. w Extended range attachments (Red, Green, Orange, Grey) can correct divergence up to 40 between 2 implants. Ø 4 mm Ch = 1.6 mm Gh 25 Gingival height (Gh) 1.5 mm OPLA mm OPLA mm OPLA mm OPLA mm OPLA050 Ø 4.0 Ø 4.0 Ø 4.0 Ø 4.0 Ø 4.0 LOCATOR ATTACHMENT SELECTION: w Ideally, the Locator attachment should be selected according to the healing screw and by applying the concept of maintaining a constant emergence profile. w Example: if a 5.5 mm Locator abutment is selected, a healing screw Art. Nb. OPHS440 (Gh: 4.5 mm and Ch: 2 mm) will be required. OPHS410 or OPHSF410 OPHS420 or OPHSF420 OPHS430 or OPHSF430 OPHS440 or OPHSF440 OPHS440 OPLA010 Gh: 1.5 OPLA020 Gh: 2.5 OPLA030 Gh: 3.5 OPLA040* Gh: 4.5 OPLA050 Gh: 5.5

21 PROSTHETIC SOLUTIONS AXIOM FED 21 Components SECONDARY PARTS: ANGULAR CORRECTION UP TO 20 BETWEEN 2 IMPLANTS SECONDARY PARTS: ANGULAR CORRECTION UP TO 40 BETWEEN 2 IMPLANTS LOCATOR male - Art. Nb Medical grade titanium, polyethylene & nylon Clear STD insert (by 4) Art. Nb Medical grade nylon Pink light retention insert (by 4) Art. Nb Medical grade nylon Blue extra-light retention Insert (by 4) Art. Nb Medical grade nylon LOCATOR male (extended range) - Art. Nb medical grade titanium, polyethylene & nylon Grey 0-retention insert (by 4) Art. Nb Medical grade nylon Red extra-light retention insert (by 4) Art. Nb Medical grade nylon Orange light retention insert (by 4) Art. Nb Medical grade nylon Green medium retention insert (by 4) Art. Nb Medical grade nylon OPLA100 OPLA200 OPLA300 OPLA400 OPLA700 OPLA710 OPLA720 OPLA730 OPLA740 Impression taking LOCATOR transfer (by 4) Medical grade aluminium OPLA500 LOCATOR analog 4 mm (by 4) Medical grade aluminium OPLA600 Inserts to be used in the case of angulations up to 20 between 2 implants (up to 10 per implant) COMPONENTS REQUIRED FOR STABILIZATION OF THE PROSTHETIC RESTORATION: STANDARD RETENTION Clear insert (2268g - 5 lbs*) MEDIUM RETENTION Pink insert (1361g-3.0 lbs*) LIGHT RETENTION Blue insert (680g-1.5 lbs*) TEMPORARY RETENTION for use during restoration procedures Inserts to be used in the case of angulations up to 40 between 2 implants (up to 20 per implant) MEDIUM RETENTION LIGHT RETENTION EXTRA-LIGHT RETENTION 0-RETENTION Teflon spacer ring Housing with black insert Green insert ( g,3-4.0 lbs*) Orange insert (907g,2-0 lbs*) Red insert ( g, lbs*) Grey insert (0 lbs*) *lbs=pounds. Three-piece multifunction instrument Insert removal tool Insert seating tool Abutment screwdriver

22 22 a OTHER ABUTMENTS Manual M1.6 titanium screw OPTS161 Manual Long laboratory screw OPTS M1.6 Black Tite definitive screw OPTS160 SUPPLIED WITH FLEXIBASE *: Axiom REG/PX base for laboratory, for unitary restoration, using press-on or machining technique w Tri-lobed indexation. w CAD CAM library, free downloadable from: w Castable coping associated, for wax-up support model. (Art. Nb. OPFLEXC403 and OPFLEXC503). Components Castable coping Ø 4.0 Removable OPFLEXC mm Ch = 3.5 mm Ht**= 1.2 mm Ø = 4 mm OPFLEX403 1 mm Ch = 3.5 mm Ø = 5 mm Ht** = 1.4 mm Castable coping Ø 5.0 OPFLEXC503 OPFLEX503 AXIOM REG/PX TI-BASE COMPATIBLE WITH SIRONA CEREC Axiom REG/PX ti-base for CEREC restoration w Compatible with SIRONA scan bodies for SIRONA CEREC BlueCam* and Omnicam* intra-oral scanners. w Only compatible with SIRONA CEREC milling blocks size L*. w Tri-lobed indexation. Removable Ht** 1.3 mm OPBASE-S45 Ø 4.5 mm NEW GOLD CAST-ON ABUTMENT: Single/multiple-unit cemented or screw-retained restoration on Axiom REG/PX implants w Tri-lobed indexation. w CERAMICOR gold cast-on abutment. Ø = 4 mm Ch = 9 mm Gh = 1.5 mm OPOG110 REWORKABLE TITANIUM ABUTMENT: Single/multiple-unit cement-retained restoration on Axiom REG/PX implants w Reworkable solution Ø = 4 mm Ch = 7 mm Gh = 1.5 mm * SIRONA and CEREC are SIRONA Gmbh trademarks. ** Height OPFS100

23 PROSTHETIC SOLUTIONS AXIOM FED 23 Prosthetic parts for Axiom D: COVER AND HEALING PLUGS FOR AXIOM 2.8 w PEEK plugs. w MANUAL placement using threaded gripper wrench Art. Nb. OPCF100. w Supplied Q for single-use. Component Visual Cover plug OPIM028 Components Gingival height (Gh) Ch = 2 mm 1.0 mm OPHS210 Healing plug 2.5 mm OPHS mm OPHS240 Gh 5.5 mm OPHS250 IMPRESSION TAKING Components Implant-level impression taking Pop-in transfer Implant analog OPPI028 OPIA028 PROSTHETIC PARTS FOR AXIOM 2.8 Abutment-level impression-taking Abutment transfer Abutment analog OPTT028 OPAT028 PEEK protective cap OPPC028 PMMA castable coping OPCA028

24 24 a TRY-IN ABUTMENTS FOR AXIOM 2.8 w Medical titanium. Gingival height (Gh) Angulation (ά) OPAF mm 7 OPAF OPAF OPAF213 OPAF mm 7 OPAF OPAF OPAF223 OPAF mm 7 OPAF OPAF OPAF243 OPAF mm 7 OPAF OPAF OPAF253 PEEK TEMPORARY ABUTMENTS F0R AXIOM 2.8 w Temporary single-unit restoration. w PEEK abutments. w Retention grooves and flat surface. w Supplied Q for single-use. w Reworkable. w MANUAL placement. OPCF100 OPOP028 Gingival height (Gh) 1.0 mm OPTP mm OPTP mm OPTP mm OPTP250 Ch = 6 mm Gh

25 PROSTHETIC SOLUTIONS AXIOM FED 25 DEFINITIVE TITANIUM ABUTMENTS w 16 components available. w Esthetic abutment shoulder. w Supplied Q. w Calibrated impacting. Ø 2.8 mm ά Ch = 6 mm Gh Gingival height (Gh) Angulation (ά) OPAT mm 7 OPAT OPAT OPAT213 OPAT mm 7 OPAT OPAT OPAT223 OPAT mm 7 OPAT OPAT OPAT243 OPAT mm 7 OPAT OPAT OPAT253 DEFINITIVE ABUTMENTS IMPACTED WITH THE SAFE LOCK Components Tip n 1 for straight or 7 angled abutments Tip n 2 for angled 15 or 23 abutments Tip n 3 specially designed for impacting the cemented beforehand crown onto the abutment OPIP100 OPIP200 OPIP400 5 IMPACTIONS For a controlled and calibrated impacting with the SAFE LOCK

26 26 a Customized CAD-CAM prosthetic components LIST OF SIMEDA RESTORATIONS AVAILABLE FOR AXIOM REG/PX IMPLANTS simeda customized & solutions IMPLANT-SUPPORTED RESTORATIONS Visual Titanium Zirconia CoCr** Machining CoCr** DMLS IPS e.max CAD*** Customized abutment Simeda Abutment Sina Z jours Crown on abutment Simeda Crown - Sina Z and Sina T - - Screw-retained single restoration Simeda Anatomic Abutment Cemented abutments bridge Simeda Bridge Sina Z - - Sina Z and Sina T - Implant bridge Simeda Implant Bridge Screwed on conical abutments or implant-supported* Bridge on stilts Simeda Implant Suprastructure Screwed on conical abutments or implant-supported* Implant-supported bar for removable prosthesis Simeda Implant Bar Screwed on conical abutments or implant-supported* Sina Z - - Sina Z TOOTH-SUPPORTED RESTORATIONS Visual Titanium Zirconia CoCr** Machining CoCr** DMLS IPS e.max CAD Coping or bridge up to 14 units Simeda Coping & Bridge Sina Z and Sina T - Inlay/onlay or laminate Simeda Inlay/Onlay & veneers - Sina Z and Sina T - - Crown Simeda Crown - Sina Z and Sina T - - Telescopic crown Simeda Telescope Crown - Sina Z *According to connection type. **CoCr : Cobalt Chromium. ***IPS e.max CAD is a registered trademark of Ivoclar Vivadent AG (Liechtenstein). Temporary restorations available in PMMA or PEEK.

27 PROSTHETIC SOLUTIONS AXIOM FED 27 LABORATORY SCAN-ADAPTERS FOR AXIOM REG/PX PLATFORMS Tools to identify AXIOM REG/PX implant platforms and conical abutments plateforms. These tools are compatible* with Simeda certified laboratory scanners for all kinds of single/multiple-unit cemented or screw-retained restorations on conical abutments. w Can be used without spray, also on platforms of conical abutments. w For optimal performance, these Scan-Adapters (SA) are screwer onto the analogs using the dedicated SA Tool. w Identification Number according to the Simeda implant Library, which is downloadable from Components SCAN-ADAPTER for Axiom REG/PX implant Scan-Adapter for Axiom REG/PX implant Supplied with fixation screw SAA SAA SCAN-ADAPTER for Multi-Unit abutment on Axiom REG/PX implant Scan-Adapter for Axiom Ø 4.8 mm Multi-Unit abutment Supplied with fixation screw Scan-Adapter for Axiom Ø 4.0 mm Multi-Unit abutment Supplied with fixation screw SAO SAO SAO SAO SCAN-ADAPTER for conical abutment on Axiom REG/PX implant Scan-Adapter for straight conical OPSC Axiom abutment Supplied with fixation screw Scan-Adapter for angled conical OPAC Axiom abutment Supplied with fixation screw SAO SAO SAO SAO SCREWDRIVER for Scan-Adapter Screwdriver for Scan-Adapter SA TOOL-01 SCAN-ADAPTER KITS for Axiom REG/PX platforms Laboratory Scan-Adapter Kit for Axiom REG/PX platforms Including 10 Axiom REG/PX Scan-Adapters (SA): 4 SAA for implants and 6 SAO for Ø 4.8 mm Multi-Unit abutments + SA TOOL-01 Laboratory Scan-Adapter kit for Axiom REG/PX platforms Including with 12 Axiom REG/PX Scan-Adapters (SA):4 SAA for implants, 6 SAO for OPSC abutments and 2 SAO for OPAC abutments + SA TOOL KIT KIT *For all kinds of screw-retained multi-unit restoration, the use of a laser scanner (e.g. DentalWings, 3Shape) requires sending the validated master model in order to obtain warranty coverage. For more information, please contact the Simeda Technical Support. SAA: Scan-Adapter for single-unit implant-supported restorations. SAO: Scan-Adapter for multiple-unit restoration on conical abutments.

28 28 a MODELLING SUPPORT FOR AXIOM REG/PX PLATFORMS w Coronal part featuring deep grooves for optimal resin adhesion. w Plastic material for easy shaping. w Sold individually (x1) or as a pack (x4), with or without laboratory screw. Components* SINGLE-UNIT WAX-UP Ø 4.8 mm Axiom REG/PX Axiom wax-up + M1.6 titanium screw Axiom wax-up + M1.6 titanium screw + laboratory screw OPWAXUP (unitary) OPWAXUP4 (by 4) OPWAXUP-S (unitary) OPWAXUP-S4 (by 4) Ø 4.8 MM MULTI-UNIT WAX-UP Axiom REG/PX Axiom REG/PX Multi-Unit Wax-up (Ø 4.8 mm) + M1.4 MU titanium screw Axiom REG/PX Multi-Unit Wax-up (Ø 4.8 mm) + M1.4 MU titanium screw + long laboratory screw MUWAXUP (unitary) MUWAXUP4 (by 4) MUWAXUP-S (unitary) MUWAXUP-S4 (by 4) Ø 4.0 MM NARROW MULTI-UNIT WAX-UP Axiom REG/PX Axiom REG/PX Multi-Unit Wax-up Ø 4.0 mm + M1.4 MU titanium screw Axiom REG/PX Multi-Unit Wax-up Ø 4.0 mm + M1.4 MU titanium screw + long laboratory screw MUNWAXUP (unitary) MUNWAXUP4 (by 4) MUNWAXUP-S (unitary) MUNWAXUP-S4 (by 4) *For ordering, please contact Simeda.

29 PROSTHETIC SOLUTIONS AXIOM FED 29 Recommended tightening torque for Axiom REG/PX prosthetic components For Axiom 2.8 component, please refer to page 23. Definitive components Torque Tightening instruments Cover screw Art. Nb. OPIM100 Healing screws Coronary heights 2 mm and 1 mm Manual 5-10 Manual 5-10 Hexagonal wrench Art. Nb. IN CHECV or IN CHELV or IN CHEXLV Definitive M1.6 «Black Tite» screw for: Art. Nb. OPTS160 for cement-retained abutments Art. Nb. OPMU160 for angled Multi-Unit abutments Definitive M1.4 «Black Tite» screw M1.4 MU zirconia prosthesis Art. Nb. MU140 or MU140Z for Multi-Unit abutments Straight Multi-Unit abutment COMMON or NARROW platform Hexagonal wrench Art. Nb. IN CHECV or IN CHELV or IN CHEXLV + Dynamometric ratchet wrench Art. Nb. IN CCD or Hexagonal mandrel Art. Nb. IN MHECV or IN MHELV or IN MHEXLV + TORQ CONTROL Multi-unit mandrel for straight abutment Art. Nb. MUM100 or MUM100L + TORQ CONTROL or Multi-Unit wrench for straight abutment Art. Nb. MUW100 + Dynamometric ratchet wrench Art. Nb. IN CCD LOCATOR abutment 25 LOCATOR wrench Art. Nb. OPCL150 + Dynamometric ratchet wrench Art. Nb. IN CCD or LOCATOR mandrel Art. Nb. OPML230 + TORQ CONTROL LOCATOR inserts - LOCATOR wench - Three-piece multifunction instrument Art. Nb. OPCL3E1 SCREWS USED IN THE LABORATORY Screwed manually (5-10 ) with the hexagonal wrench IN CHECV, IN CHELV or IN CHEXLV. M1.6 screw M1.4 screw Titanium M1.6 screw for cement-retained abutments OPTS161 M1.4 MU blue screw for Multi-Unit abutment MU141 Long laboratory screw for cement-retained abutments OPTS162 Short Multi-Unit laboratory screw MUT101 M1.6 MU blue screw for Multi-unit angled abutments OPMU161 OPMU161-4 Long Multi-Unit laboratory screw MUT102 Short pick-up titanium M1.6 screw OPPU101 Long pick-up titanium M1.6 screw OPPU102

30 30 a Prosthetic instruments AXIOM REG/PX COMMON PROSTHETIC KIT: Art. Nb. IN MOD OPP w Contains the new Multi-Unit screwing tools (wrench and mandrel). w Free grommets for any additional instruments. w Free grommets for Locator instruments, hexagonal wrenches/mandrels (available in 3 heights: short, long, XL), or abutment extractor/gripper (Art. Nb. INEXPS or INEXPL) 1 short hexagonal wrench (INCHECV) and 1 long hexagonal wrench (INCHELV) 1 torque wrench (INCCD) 1 short hexagonal mandrel (INMHECV) and 1 long hexagonal mandrel (INMHELV) 1 Multi-Unit wrench (MUW100) 1 Multi-Unit mandrel (MUM100) AXIOM REG/PX DYNAMOMETRIC RATCHET WRENCH Art. Nb. IN CCD w For tightening torques: 15, 25 and 35. TORQ CONTROL *: UNIVERSAL TORQUE WRENCH FOR AXIOM REG/PX Art. Nb ** w Automatic declutching when the required torque is reached w 7 torquelevels (10 to 35 ). w Universal connection system for the prosthetic mandrels. w Microhead and ergonomic handpiece. w Easy and rapid to use. *Not included in prosthetic kit Ref. IN MOD OPP. **Mandrel not supplied.

31 PROSTHETIC SOLUTIONS AXIOM FED 31 List of materials (Simeda prosthesis excluded) Components Material Axiom REG/PX/2.8 implants Healing screws, cover screws and prosthetic screws Implant Implant analogs Temporary titanium abutments Standard titanium abutments Medical grade V titanium Esthetic titanium abutments Esthetic zirconia abutments (metal basis) Reworkable abutment Multi-Unit abutments Pacific bonding ring Definitive prosthetic screws Medical grade V titanium, DLC coated Multi-Unit abutments protective caps Multi-Unit titanium temporary copings Multi-Unit abutments transfers Medical grade V anodized titanium Multi-Unit abutment analogs Multi-Unit laboratory screws Esthetic zirconia abutments (coronal part)* Multi-Unit protective analog Gold cast-on/ceramicor abutments and copings Sina Z (zirconia) Steel CERAMICOR: Au 60 % / Pd 20 % / Pt 19 % / Ir 1 %. Melting interval: 1400 C 1490 C. Technical Assistance: Cendres + Métaux SA Phone Fax Multi-Unit PEEK temporary copings Single and multi-unit wax-up (Multi-Unit) Scan Adapters Protective caps for standard and Axiom 2.8 abutments Polyetheretherketone (PEEK) Axiom 2.8 healing plugs Axiom 2.8 cover plugs Axiom 2.8 temporary abutments Castable copings LOCATOR transfer (OPLA500) and analog (OPLA600 ) Direct transfer for standard (OPTT100) and Axiom 2.8 (OPTT028) abutments LOCATOR Inserts CoCr Multi-Unit copings Polymethylmethacrylate (PMMA) Aluminium Polycarbonate Polyethylene & Nylon Cobalt-Chromium Impression ring for Axiom pick-up Propylux *Availability to be confirmed.

32 Photos credits: Anthogyr - All rights reserved - Not contractual photos. C63_GB ANTHOGYR SAS 2 237, Avenue André Lasquin Sallanches - France Phone +33 (0) Fax +33 (0)