The Role of. 54 MARCH 2016 // dentaltown.com. radiology feature. by Deepak Gupta, MDS

Size: px

Start display at page:

Download "The Role of. 54 MARCH 2016 // dentaltown.com. radiology feature. by Deepak Gupta, MDS"

William Barber
5 years ago
Views:

The Role of Imaging by Deepak Gupta, MDS Dr. Deepak Gupta completed his post graduation in oral medicine and maxillofacial radiology in 2011.

1 The Role of Imaging by Deepak Gupta, MDS Dr. Deepak Gupta completed his post graduation in oral medicine and maxillofacial radiology in He is currently an Associate Professor/ Reader in the Department of Oral Medicine and Radiology, in M.M. College of Dental Sciences and Research, in Mullana, India. He teaches both graduate and post-graduate students. He serves on the editorial boards and scientific review committees of various international dental journals and professional committees with a particular interest in oral medicine and maxillofacial radiology. 54 MARCH 2016 // dentaltown.com

CBCT in Dentistry Abstract In the past, the field of dentistry was precise and dental professionals were grossly involved with only treating dentition.

2 CBCT in Dentistry Abstract In the past, the field of dentistry was precise and dental professionals were grossly involved with only treating dentition. Nowadays, dentistry has become more focused and specialized. Maxillofacial radiology is one of the specialties considered dentistry s backbone in terms of investigation, treatment planning and follow up. Although cone-beam computed tomography (CBCT) was a dream 20 years ago, today it has become a very important diagnostic tool. The recent introduction of CBCT has further upgraded the field of maxillofacial radiology; its role in oral and maxillofacial surgery, orthodontics, airway assessment, temporomandibular joint disorders, endodontics and periodontics is widely described in the literature. Although precise and accurate measurements in the maxillofacial region for dental implants and for other maxillofacial lesions are achievable with conventional CT, CBCT provides more accurate measurements at lower dosages. Furthermore, CBCT enables the assessment of bone quality and quantity. In this article I will highlight CBCT usage and application in dental practices, the importance of artifact reduction, and radiation risks. Introduction The maxillofacial region extends from the base of the skull to the hyoid bone and is considered one of the most anatomically complex regions of the body. This region can be affected by a variety of diseases and disorders, and diagnostic maxillofacial radiology and imaging has assumed a lead role in its evaluation. 1 Just a few decades ago, oral radiology was practiced solely with the help of conventional radiographs. Although conventional radiographs revealed the anatomic structure of interest in only two dimensions, the procedure was considered vital for diagnosis, treatment planning and follow up. As soon as digital radiology came into existence and CBCT was introduced, it led to improved image quality, and three-dimensional visualization of the anatomical structure with minimal distortion and overlap. 2 In the past, literature has highlighted the emergence of CBCT as a radiological instrument that has expanded the field of oral and maxillofacial radiology. 1-6 Since CBCT imaging provides three-dimensional volumetric data reconstruction of dental and associated maxillofacial structures with isotropic resolution and high dimensional accuracy, the dental professional must FREE FACTS, circle 9 on card dentaltown.com \\ MARCH

3 be well aware of the technique, its advantages and disadvantages, and cases in which this technology can be recommended. A CBCT scanner is configured with a collimated X-ray source, leading to the production of a cone- or pyramid-shaped beam of X-radiation. Just a single full (or even partial) circular revolution around the patient is sufficient to capture enough data by the machine s digital detector. This data is then reconstructed into three-dimensional volumetric information 3, 4 in contrast to conventional CT scanners, which have a fan-beam approach. CBCT requires reconstructing the object slice by slice, and then stacking the slices to obtain a 3D representation of the object. Thus, the time required to acquire an anatomical region by cone-beam projection is less than that required by a fan-beam projection. 2 Although the installation of a high-powered X-ray tube can be an alternative to reduce the fan-beam method s acquisition time, this will lead to an increase in the cost and size of the scanner. This will even increase the electric power consumption, thus making the design unsuitable for a compact scanner. 2, 3 The amount of information one can obtain from a 3D image over a 2D image is considerable. 2, 7 As a result, CBCT is used in the diagnosis of pathology, temporomandibular joint (TMJ) evaluation, and orthodontic or implants treatment planning. During implant treatment-planning, evaluation of available bone is very important for successful treatment. It s essential to accurately measure the height of bone available for implant placement to avoid compromising vital structures such as the inferior alveolar nerve or maxillary sinus during implant placement. 2, 8 Advantages CBCT provides a number of potential advantages for maxillofacial imaging when compared with conventional CT, as follows: Isotropic voxel resolution Rapid scan time Significantly low radiation dosage. CBCT can provide an optimum field of view (FOV) for each patient based on the region of interest and the suspected CBCT requires reconstructing the object slice by slice, and then stacking the slices to obtain a 3D representation of the object. Thus, the time required to acquire an anatomical region by cone-beam projection is less than that required by a fan-beam projection. 56 MARCH 2016 // dentaltown.com

CBCT utilizes a cone beam, which creates noise, thus reducing the image clarity in comparison to conventional CT and Dentascan. Current CBCT doesn t appreciate soft tissue of the maxillofacial region.

4 CBCT utilizes a cone beam, which creates noise, thus reducing the image clarity in comparison to conventional CT and Dentascan. Current CBCT doesn t appreciate soft tissue of the maxillofacial region. disease. 9, 10 Exposing the patient to CBCT for a particular maxillofacial lesion may reduce the effective dose of radiation by percent as compared to a fan-beam CT system. 2 Disadvantages While CBCT offers several advantages, the dental professional must also consider its disadvantages. CBCT utilizes a cone beam, which creates noise, thus reducing the image clarity in comparison to conventional CT and Dentascan. Current CBCT doesn t appreciate soft tissue of the maxillofacial region. Another factor that impairs CBCT image quality is image artifacts, such as streaking, shading, rings and distortion. Streaking and shading artifacts, which appear due to high areas of attenuation (such as metallic restorations) and inherent spatial resolution, may limit adequate visualization 2, 4, 5 of structures in the dento-alveolar region. Radiation risk CBCT renders the patient with lower radiation risk as compared to the conventional CT, however, low dosage is important; one must take the ALARA principle into consideration. The European guidelines for CBCT use indicate that CBCT interpretation should be done by a trained dentist or by an oral and maxillofacial radiologist. 2 Literature has revealed that a per-capita annual U.S. dose is estimated at 6200μSv. Approximately 3000μSv are attributed to diagnostic procedures. Maxillofacial radiologists must keep the FOV as small as possible because the smaller FOV normally generates lower radiation doses Lorenzoni and others reviewed the literature to disclose the radiation doses associated with CBCT, conventional CT, and conventional two-dimensional radiography. 3 They revealed that the effective dose generated by CT is generally higher than that of CBCT. CT produces high radiation doses ranging between 534μSv and 860μSv for the maxilla and mandible. 3 They also found that mandibular exposures lead to larger radiation risk than the maxillary 14, 15 because the salivary glands, thyroid, and esophagus are more irradiated in the mandibular exam. Artifacts Artifacts contribute to image degradation and can lead to inaccurate or false diagnoses. Some of these artifacts are more pronounced in CBCT units than their CT counterparts. Literature has revealed that CT images are more prone to artifacts than 4, 16 conventional radiographs. FREE FACTS, circle 9 on card dentaltown.com \\ MARCH

Those considering installing CBCT devices should consult a health physicist (or other qualified expert) to perform a shielding analysis based on NCRP reports.

5 Those considering installing CBCT devices should consult a health physicist (or other qualified expert) to perform a shielding analysis based on NCRP reports. Evaluation of the performance must also be completed every year. Physical-based artifacts occur due to the physical processes involved in the acquisition of CT data, including noise and beam hardening. Jaju defines noise as an unwanted, randomly or non-randomly distributed disturbance of a signal that tends to obscure the signal s information. 19 Literature highlights that the source of noise in computed tomography is scattered radiation, which arises from interactions of the primary radiation beam with the object s atoms. This can be reduced by increased milliamperage (ma). Conventional CT machines produce less noise because of the high ma used, along with effective patient collimation, which reduces the scattered radiation. CBCT machines produce more noise, due to a lower ma. Since noise is a major determinant of contrast resolution, CBCT images have lower contrast resolution than 4, 16 conventional CT. Beam hardening can result in cupping artifacts and the appearance of dark bands or streaks between dense objects in the image. 4, 16 By definition, cupping artifacts occur when X-rays passing through the center of a large object become harder than those passing through the edges of the object, due to the greater amount of material the beam has to penetrate. 19 Dark streaks and bands between dense objects in an image are seen between two implants located in the same jaw that are in close proximity to each other. Jaju says this occurs because the portion of the beam that passes through both objects at certain tube positions becomes harder than when it passes through only one of the objects at other tube positions. 19 Brooks and Di Chiro used filtration to decrease beam hardening. They demonstrated a reduction of beam-hardening effects from 9.2 percent in 20cm of water using a 4.5mm aluminum pre-filter to 1.5 percent using a 3.5cm aluminum pre-filter. Their findings showed that using high-atomic-number materials such as copper or tin filters could produce even better results. 17 Antiscatter grids can also reduce beam hardening with the help of lead leaves. Beam-hardening-correction software may also be used. The software is an iterative correction algorithm that can be applied when images of bony regions are being reconstructed MARCH 2016 // dentaltown.com

Partial-volume artifacts include a truncated-view artifact, which is a shading artifact that may arise if the object is not completely covered by the detector.

6 Partial-volume artifacts include a truncated-view artifact, which is a shading artifact that may arise if the object is not completely covered by the detector. In conventional CT units this is not a problem, as the entire object is always within the unit s FOV; however, it does affect CBCT units due to their limited FOV. 4, 16, 17 In addition, metal objects such as dental restorations can lead to streaking artifacts. 19 Streaking caused by over ranging can be greatly reduced by means of special software corrections. Metal artifact reduction software can improve the image s quality. Principles for use Various organizations like the National Council on Radiation Protection and Measurements (NCRP) have stressed that CBCT should only be used when the potential clinical benefits of the scan outweigh the risks associated with exposure to ionizing radiation. NCRP s guidelines also stress upon the fact that the operators must use the radiation safety equipment like thyroid collars and lead aprons when they will not interfere with the examination. CBCT must be performed if structures of interest cannot be captured by 6, 18 conventional techniques. Those considering installing CBCT devices should consult a health physicist (or other qualified expert) to perform a shielding analysis based on NCRP reports. Evaluation of the performance must also be 6, 18 completed every year. Conclusion CBCT usage has evolved over the decades. While this may be better than conventional CT imaging, the clinician must be aware of the disadvantages and potential risks when utilizing CBCT. By understanding the risks, and staying up to date, clinicians can reap the benefits of CBCT and all it has to offer. References 1. Gupta D. Oro-Maxillofacial Radiology and Imaging: An Indispensable Dental Specialty. The Open Dentistry Journal, 2015, 9, (Suppl 2: M1) / 2. Shaibah WI, Yamany IA, Jastaniah SD. Physical Measurements for the Accuracy of Cone-Beam CT in Dental Radiography Open Journal of Medical Imaging, 2014, 4, Diego Coelho Lorenzoni, AnaMaria Bolognese, Daniela Gamba Garib, Fabio Ribeiro Guedes, and Eduardo Franzotti Sant Anna. Cone-Beam Computed Tomography and Radiographs in Dentistry: Aspects Related to Radiation Dose International Journal of Dentistry Volume 2012, Article ID , 10 pages doi: /2012/ Jaju PP, Jain M, Singh A, Gupta A. Artefacts in cone beam CT Open Journal of Stomatology, 2013, 3, OJST (doi: /ojst ). 5. Ibraheem, I. (2012) Reduction of Artifacts in Dental Cone Beam CT Images to Improve the Three Dimensional Image Reconstruction. Journal of Biomedical Science and Engineering, 5, The use of cone-beam computed tomography in dentistry JADA 2012; 143(8): Levato, C., Farman, A., Chenin, D. and Scarfe, W. (2009) Cone-Beam Computed Tomography: A Clinician s Perspective. Inside Dentistry, 5, Ganguly, R. (2009) Accuracy of Linear Measurement in Galileos Cone-Beam CT under Simulated Clinical Condition. Master s Thesis, University of Iowa, Iowa City. 9. Scarfe, W., Farman, A. and Sukovic, P. (2006) Clinical Applications of Cone-Beam Computed Tomography in Dental Practice. Journal of the Canadian Dental Association, 72, Scarfe, W. and Farman, A. (2007) Cone Beam Computed Tomography: A Paradigm Shift for Clinical Dentistry. Australasian Dental Practice, July/August, J. M. Palomo, P. S. Rao, and M. G. Hans, Influence of CBCT exposure conditions on radiation dose, Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology and Endodontology, vol. 105, no. 6, pp , J. B. Ludlow, L. E. Davies-Ludlow, S. L. Brooks, and W. B. Howerton, Dosimetry of 3 CBCT devices for oral and maxillofacial radiology: CB Mercuray, NewTom 3G and i-cat, Dentomaxillofacial Radiology, vol. 35, no. 4, pp , R. Pauwels, J. Beinsberger, B. Collaert et al., Effective dose range for dental cone beam computed tomography scanners, European Journal of Radiology, vol. 81, no. 2, pp , J. A. Roberts, N. A. Drage, J. Davies, andd.w. Thomas, Effective dose from cone beam CT examinations in dentistry, British Journal of Radiology, vol. 82, no. 973, pp , J. B. Ludlow, L. E. Davies-Ludlow, and S. L. Brooks, Dosimetry of two extraoral direct digital imaging devices: newtom cone beam CT and Orthophos Plus DS panoramic unit, Dentomaxillofacial Radiology, vol. 32, no. 4, pp , Barrett, J.F. and Keat, N. (2004) Artifacts in CT: Recognition and avoidance. Radiographics, 24, McDavid, W.D., Waggener, R.G., Payne, W.H. and Dennis, M.J. (1975) Spectral effects on three-dimensional re- construction from x-rays. Medical Physics, 2, National Council on Radiation Protection & Measurements. Radiation Protection in Dentistry (Report No. 145). Bethesda, Md.: NRCP Publications; Jaju, Prashant P. Cone Beam Computed Tomography: A Clinician s Guide to 3D Imaging. Print Comment on this article at Dentaltown.com/magazine.aspx. FREE FACTS, circle 9 on card dentaltown.com \\ MARCH

Scientific Affairs. Scientific Affairs

Scientific Affairs. Scientific Affairs The use of cone-beam computed tomography in dentistry : An advisory statement from the American Dental Association Council on Scientific Affairs The American Dental Association Council on Scientific Affairs