PL ATING SYSTEM. Pre-contoured implants Versatile fixation system Hexalobe screw recess design Locked fixation

Size: px

Start display at page:

Download "PL ATING SYSTEM. Pre-contoured implants Versatile fixation system Hexalobe screw recess design Locked fixation"

Philippa Dortha Watts
5 years ago
Views:

1 I N N O VA T I O N ME A NS M OT I O N FOOTMOTION PL ATING SYSTEM Pre-contoured implants Versatile fixation system Hexalobe screw recess design Locked fixation

$arthrodeses, fractures and osteotomies fixation and revision surgeries of the foot in$ adults.

Acute or chronic local or systemic infections.

area. Insufficient bone quality preventing a good fixation of the implants into the

submit the implant to abnormal mechanical strains.

Serious problems of non-compliance, mental or neurological disorders, failure to follow

EXAMPLE OF APPLICATIONS Medial Lisfranc arthrodeses Dorsal Lisfranc arthrodeses

Straight plates st MTP arthrodesis The size of the straight plate to be used is up to

2 FOOTMOTION PLATING SYSTEM Indications: The Footmotion Plating System is intended for arthrodeses, fractures and osteotomies fixation and revision surgeries of the foot in adults. Contra-indications: Serious vascular deterioration, bone devitalization, Pregnancy. Acute or chronic local or systemic infections. Lack of musculo-cutaneous cover, severe vascular deficiency affecting the concerned area. Insufficient bone quality preventing a good fixation of the implants into the bone, Muscular deficit, neurological deficiency or behavioral disorders, which could submit the implant to abnormal mechanical strains. Allergy to one of the materials used or sensitivity to foreign bodies. Serious problems of non-compliance, mental or neurological disorders, failure to follow post-operative care recommendations. Unstable physical and/or mental condition. EXAMPLE OF APPLICATIONS Medial Lisfranc arthrodeses Dorsal Lisfranc arthrodeses Talo-navicular arthrodesis Opening base wedge osteotomy Plantar Lapidus arthrodesis Straight plates st MTP arthrodesis The size of the straight plate to be used is up to the surgeon and depends on the indication. TECHNICAL FEATURES PRECONTOURED IMPLANTS The design of these implants is the result of a proprietary state-of-the-art mapping technology to establish the maximum congruence between the plate and the bone. Low profile implants.4 to.7 mm INNOVATION MEANS MOTION

TECHNICAL FEATURES FIXATION AND SCREW FEATURES One type of

5Lxx) and non locking screws (RLT.8Lxx and RLT3.5Lxx). Ø.

8Lxx) The screw head is minimally invasive and buried in the

The hexalobe screw recess design improves torque

SYSTEM Features: Results: The threads under the screw head

Screw head cap (), Plate and screws are all made of titanium

properties: A perfect coaptation of both profiles during

3 TECHNICAL FEATURES FIXATION AND SCREW FEATURES One type of hole for two screw diameters: Locking (SLT.8Lxx and SLT3.5Lxx) and non locking screws (RLT.8Lxx and RLT3.5Lxx). Ø.8 mm locking screw (SLT.8Lxx) Ø.8 mm non locking screw (RLT.8Lxx) The screw head is minimally invasive and buried in the plate () so as to limit the risk of soft tissue irritation. The hexalobe screw recess design improves torque transmission and ability to cope with difficulty arising from screw insertion into the bone. Ø3.5 mm locking screw (SLT3.5Lxx) Ø3.5 mm non locking screw (RLT3.5Lxx) Hexalobe screw recess design MONOAXIAL SELF-LOCKING SYSTEM Features: Results: The threads under the screw head and inside the hole have strictly the same characteristics (): - Cylindrical internal thread profile. - Cylindrical external thread profile. Screw head cap (), Plate and screws are all made of titanium alloy Low profile assembly: - The screw head is stopped in the hole by its cap, ensuring the locking (3), - The screw head is buried in the plate (4). Construct limiting cold welding risks for improved removal properties: A perfect coaptation of both profiles during locking (5). SPECIFIC FIXATIONS FOR OPTIMIZED STABILITY OF THE ASSEMBLY Ramp oblong hole The ramp oblong hole enables a simple and controlled compression thanks to its screw-plate interface. Only Ø.8 mm non-locking screws (RLT.8Lxx) can be used for the ramp oblong holes. Compression of the joint up to.5 mm

A COMPREHENSIVE RANGE OF PLATES PLATE FOR ST METATARSOPHALANGEAL ARTHRODESIS

Hole for transfixation screw: The transfixation screw goes through the st MTP

Converging screws in the distal and proximal areas: Converging screws allow a

Distal converging screws Transfixation screw st MTP joint Proximal converging

osteoarthritis, functional deformities) Plantar positioning of the plate:

tendon, Offers stable assembly and generate dynamic compression (see diagram

stability to the assembly, Bendable sections, 3 offsets, (3, 5 and 7 mm) to adapt

Dynamic compression: Medial cuneiform bone st Metatarsal bone Transfixation screw

OSTEOTOMY (Example of application: severe hallux valgus) A wedge is integrated

4 A COMPREHENSIVE RANGE OF PLATES PLATE FOR ST METATARSOPHALANGEAL ARTHRODESIS (Examples of applications: hallux rigidus, severe hallux valgus, polyarthritis) Hole for transfixation screw: The transfixation screw goes through the st MTP joint providing stability to the assembly. Converging screws in the distal and proximal areas: Converging screws allow a stable fixation of the system. Distal converging screws Transfixation screw st MTP joint Proximal converging screws PLATE FOR PLANTAR LAPIDUS ARTHRODESIS (Examples of applications: osteoarthritis, functional deformities) Plantar positioning of the plate: Minimizes conflicts with the extensor hallucis longus and tibialis anterior tendon, Offers stable assembly and generate dynamic compression (see diagram opposite), The transfixation screw is inserted through the joint providing stability to the assembly, Bendable sections, 3 offsets, (3, 5 and 7 mm) to adapt to all anatomical features. Dynamic compression: Medial cuneiform bone st Metatarsal bone Transfixation screw Reaction force due to contact with the ground PLATE FOR OPENING BASE WEDGE OSTEOTOMY (Example of application: severe hallux valgus) A wedge is integrated into the plate: the wedge size depends on the correction angle. 3 sizes are available: 3, 4 and 5 mm + neutral plate, Low profile plate,.4 mm thick, Converging proximal screws offering stable fixation. 3 in dedicated instrument: Distraction, compression and osteotomies. ANC64 INNOVATION MEANS MOTION

A COMPREHENSIVE RANGE OF PLATES PLATE FOR MEDIAL LISFRANC ARTHRODESES (Example of

0 cuneo-metatarsal angle, 0 intermetatarsal angle, Optimal compression thanks to

$fracture, Lisfranc joint dislocation, and fracture/dislocation after-effects)$ possible constructs: C-C3-M-M3 or C3-cuboid-M3-M4 arthrodeses, Complementary

possible constructs: C-C3-M-M3 or C3-cuboid-M3-M4 arthrodeses, Complementary

PLATE FOR TALO-NAVICULAR ARTHRODESIS (Examples of applications: osteoarthritis,

screws offering stable fixation, Transfixation screw: inserted through the joint

$fractures, osteotomies and fusions for small bones and bone fragments.$

5 A COMPREHENSIVE RANGE OF PLATES PLATE FOR MEDIAL LISFRANC ARTHRODESES (Example of application: structural instability) Converging screws offering stable fixation, 0 cuneo-metatarsal angle, 0 intermetatarsal angle, Optimal compression thanks to the slotted holes. PLATE FOR DORSAL LISFRANC ARTHRODESES (Examples of applications: osteoarthritis, fracture, Lisfranc joint dislocation, and fracture/dislocation after-effects) possible constructs: C-C3-M-M3 or C3-cuboid-M3-M4 arthrodeses, Complementary solutions for midfoot arthrodeses, Cuneo-metatarsal angulation of 0. PLATE FOR TALO-NAVICULAR ARTHRODESIS (Examples of applications: osteoarthritis, high-arched foot, equinovarus, flat feet, and traumatic aftereffects) Converging screws offering stable fixation, Transfixation screw: inserted through the joint for a stable assembly, Compression is achieved thanks to the transfixation screw, Right balance between the implant low profile and its strength:.7 mm thick. STRAIGHT PLATES FOR VARIOUS APPLICATIONS The Footmotion Plating System set offers a complete range of compressive straight plates designed for treatments of fractures, osteotomies and fusions for small bones and bone fragments. From to 7 holes Optimal compression thanks to the oblong holes Bendable plate for several construct s

IMPLANTS REFERENCES ST MTP ARTHRODESIS PLATES

FMTGD st MTP Arthrodesis plate - Left - Size

3 FMTGD3 st MTP Arthrodesis plate - Left -

Talo-Navicular Arthrodesis plate - Right -

Lisfranc Arthrodeses plate - Right - Size

- Size DORSAL LISFRANC ARTHRODESES PLATES

Arthrodeses plate - Narrow Dorsal Lisfranc

Arthrodeses plate - Wide PLANTAR LAPIDUS

mm Plantar Lapidus Arthrodesis plate - Size

6 IMPLANTS REFERENCES ST MTP ARTHRODESIS PLATES FMTDD st MTP Arthrodesis plate - Right - Size FMTGD st MTP Arthrodesis plate - Left - Size FMTDD st MTP Arthrodesis plate - Right - Size FMTGD st MTP Arthrodesis plate - Left - Size FMTDD3 st MTP Arthrodesis plate - Right - Size 3 FMTGD3 st MTP Arthrodesis plate - Left - Size 3 TALO-NAVICULAR ARTHRODESIS PLATES FTTDD Talo-Navicular Arthrodesis plate - Right - Size FTTGD Talo-Navicular Arthrodesis plate - Left - Size FTTDD Talo-Navicular Arthrodesis plate - Right - Size FTTGD Talo-Navicular Arthrodesis plate - Left - Size MEDIAL LISFRANC ARTHRODESES PLATES FETDD Medial Lisfranc Arthrodeses plate - Right - Size FETGD Medial Lisfranc Arthrodeses plate - Left - Size DORSAL LISFRANC ARTHRODESES PLATES FDTSDN FDTSDS FDTSDW Dorsal Lisfranc Arthrodeses plate - Narrow Dorsal Lisfranc Arthrodeses plate - Standard Dorsal Lisfranc Arthrodeses plate - Wide PLANTAR LAPIDUS ARTHRODESIS PLATES FLTSV FLTSV FLTSV3 Plantar Lapidus Arthrodesis plate - Size - 3 mm Plantar Lapidus Arthrodesis plate - Size - 5 mm Plantar Lapidus Arthrodesis plate - Size 3-7 mm INNOVATION MEANS MOTION

IMPLANTS REFERENCES OPENING WEDGE PLATES FOTSM0 FOTSM3 FOTSM4 FOTSM5 Opening wedge plate - 0 mm Opening wedge plate - 3 mm Opening wedge plate - 4 mm Opening wedge plate -

4-5 holes Straight plate - Size 5-6 holes Straight plate - Size 6-7 holes Ø.8 MM SCREWS LOCKING SCREWS * NON LOCKING SCREWS * SLT.8L0 SLT.8L SLT.8L4 SLT.8L6 SLT.8L8 SLT.

8 mm - L 4 mm Locking screw - Ø.8 mm - L 6 mm Locking screw - Ø.8 mm - L 8 mm Locking screw - Ø.8 mm - L 0 mm Locking screw - Ø.8 mm - L mm Locking screw - Ø.

8 mm - L 34 mm RLT.8L0 RLT.8L RLT.8L4 RLT.8L6 RLT.8L8 RLT.8L0 RLT.8L RLT.8L4 RLT.8L6 RLT.8L8 RLT.8L30 RLT.8L3 RLT.8L34 Non locking screw - Ø.

8 mm - L 8 mm Non locking screw - Ø.8 mm - L 8 mm Non locking screw - Ø.8 mm - L 30 mm Non locking screw - Ø.8 mm - L 3 mm Non locking screw - Ø.

5L3 SLT3.5L34 SLT3.5L36 SLT3.5L38 SLT3.5L40 * Blue anodized Locking screw - Ø3.5 mm - L 0 mm Locking screw - Ø3.5 mm - L mm Locking screw - Ø3.

5 mm - L 4 mm Locking screw - Ø3.5 mm - L 6 mm Locking screw - Ø3.5 mm - L 8 mm Locking screw - Ø3.5 mm - L 30 mm Locking screw - Ø3.5 mm - L 3 mm Locking screw - Ø3.

5L Non locking screw - Ø3.5 mm - L mm RLT3.5L4 Non locking screw - Ø3.5 mm - L 4 mm RLT3.5L6 Non locking screw - Ø3.5 mm - L 6 mm RLT3.5L8 Non locking screw - Ø3.

5 mm - L 3 mm RLT3.5L34 Non locking screw - Ø3.5 mm - L 34 mm RLT3.5L36 Non locking screw - Ø3.5 mm - L 36 mm RLT3.5L38 Non locking screw - Ø3.5 mm - L 38 mm RLT3.

7 IMPLANTS REFERENCES OPENING WEDGE PLATES FOTSM0 FOTSM3 FOTSM4 FOTSM5 Opening wedge plate - 0 mm Opening wedge plate - 3 mm Opening wedge plate - 4 mm Opening wedge plate - 5 mm STRAIGHT PLATES FUTS FUTS FUTS3 FUTS4 FUTS5 FUTS6 Straight plate - Size - holes Straight plate - Size - 3 holes Straight plate - Size 3-4 holes Straight plate - Size 4-5 holes Straight plate - Size 5-6 holes Straight plate - Size 6-7 holes Ø.8 MM SCREWS LOCKING SCREWS * NON LOCKING SCREWS * SLT.8L0 SLT.8L SLT.8L4 SLT.8L6 SLT.8L8 SLT.8L0 SLT.8L SLT.8L4 SLT.8L6 SLT.8L8 SLT.8L30 SLT.8L3 SLT.8L34 Locking screw - Ø.8 mm - L 0 mm Locking screw - Ø.8 mm - L mm Locking screw - Ø.8 mm - L 4 mm Locking screw - Ø.8 mm - L 6 mm Locking screw - Ø.8 mm - L 8 mm Locking screw - Ø.8 mm - L 0 mm Locking screw - Ø.8 mm - L mm Locking screw - Ø.8 mm - L 4 mm Locking screw - Ø.8 mm - L 6 mm Locking screw - Ø.8 mm - L 8 mm Locking screw - Ø.8 mm - L 30 mm Locking screw - Ø.8 mm - L 3 mm Locking screw - Ø.8 mm - L 34 mm RLT.8L0 RLT.8L RLT.8L4 RLT.8L6 RLT.8L8 RLT.8L0 RLT.8L RLT.8L4 RLT.8L6 RLT.8L8 RLT.8L30 RLT.8L3 RLT.8L34 Non locking screw - Ø.8 mm - L 0 mm Non locking screw - Ø.8 mm - L mm Non locking screw - Ø.8 mm - L 4 mm Non locking screw - Ø.8 mm - L 6 mm Non locking screw - Ø.8 mm - L 8 mm Non locking screw - Ø.8 mm - L 0 mm Non locking screw - Ø.8 mm - L mm Non locking screw - Ø.8 mm - L 4 mm Non locking screw - Ø.8 mm - L 6 mm Non locking screw - Ø.8 mm - L 8 mm Non locking screw - Ø.8 mm - L 30 mm Non locking screw - Ø.8 mm - L 3 mm Non locking screw - Ø.8 mm - L 34 mm * Green anodized * Golden anodized Ø3.5 MM SCREWS LOCKING SCREWS * NON LOCKING SCREWS * SLT3.5L0 SLT3.5L SLT3.5L4 SLT3.5L6 SLT3.5L8 SLT3.5L0 SLT3.5L SLT3.5L4 SLT3.5L6 SLT3.5L8 SLT3.5L30 SLT3.5L3 SLT3.5L34 SLT3.5L36 SLT3.5L38 SLT3.5L40 * Blue anodized Locking screw - Ø3.5 mm - L 0 mm Locking screw - Ø3.5 mm - L mm Locking screw - Ø3.5 mm - L 4 mm Locking screw - Ø3.5 mm - L 6 mm Locking screw - Ø3.5 mm - L 8 mm Locking screw - Ø3.5 mm - L 0 mm Locking screw - Ø3.5 mm - L mm Locking screw - Ø3.5 mm - L 4 mm Locking screw - Ø3.5 mm - L 6 mm Locking screw - Ø3.5 mm - L 8 mm Locking screw - Ø3.5 mm - L 30 mm Locking screw - Ø3.5 mm - L 3 mm Locking screw - Ø3.5 mm - L 34 mm Locking screw - Ø3.5 mm - L 36 mm Locking screw - Ø3.5 mm - L 38 mm Locking screw - Ø3.5 mm - L 40 mm RLT3.5L0 Non locking screw - Ø3.5 mm - L 0 mm RLT3.5L Non locking screw - Ø3.5 mm - L mm RLT3.5L4 Non locking screw - Ø3.5 mm - L 4 mm RLT3.5L6 Non locking screw - Ø3.5 mm - L 6 mm RLT3.5L8 Non locking screw - Ø3.5 mm - L 8 mm RLT3.5L0 Non locking screw - Ø3.5 mm - L 0 mm RLT3.5L Non locking screw - Ø3.5 mm - L mm RLT3.5L4 Non locking screw - Ø3.5 mm - L 4 mm RLT3.5L6 Non locking screw - Ø3.5 mm - L 6 mm RLT3.5L8 Non locking screw - Ø3.5 mm - L 8 mm RLT3.5L30 Non locking screw - Ø3.5 mm - L 30 mm RLT3.5L3 Non locking screw - Ø3.5 mm - L 3 mm RLT3.5L34 Non locking screw - Ø3.5 mm - L 34 mm RLT3.5L36 Non locking screw - Ø3.5 mm - L 36 mm RLT3.5L38 Non locking screw - Ø3.5 mm - L 38 mm RLT3.5L40 Non locking screw - Ø3.5 mm - L 40 mm * Fuchsia anodized

ANC350 Ø4.5 mm AO quick coupling handle - Size Qty ANC577 Ø.7 mm threaded guide gauge for Ø3.5 mm screws Qty ANC567 Ø6 mm convex reamer ANC578 Bending plier ANC568 Ø6 mm concave reamer ANC586 Ø.

8 ANC350 Ø4.5 mm AO quick coupling handle - Size Qty ANC577 Ø.7 mm threaded guide gauge for Ø3.5 mm screws Qty ANC567 Ø6 mm convex reamer ANC578 Bending plier ANC568 Ø6 mm concave reamer ANC586 Ø.0 mm non threaded bent guide gauge for Ø.8 mm screws ANC569 Ø8 mm convex reamer ANC589 Length gauge for Ø.8 and Ø3.5 mm screws ANC570 Ø8 mm concave reamer ANC590 Ø.0 mm quick coupling drill bit - L 5 mm ANC57 Ø0 mm convex reamer ANC59 Ø.7 mm quick coupling drill bit - L 5 mm ANC57 Ø0 mm concave reamer ANC6 Ø3.0 mm quick coupling drill bit - L 5 mm ANC573 Ø mm convex reamer ANC64 Opening wedge osteotomy instrument ANC574 Ø mm concave reamer Pin - Ø. L70 mm 5 ANC575 T8 quick coupling screwdriver Pin - Ø.6 L00 mm 5 ANC576 Ø.0 mm threaded guide gauge for Ø.8 mm screws Pin - Ø.6 L50 mm 5 RACK (ANC588/R) BASE (ANC588/B) ANC588/M3 ANC588/M ANC588/M6 ANC588/M4 ANC588/M7 ANC588/M8 ANC588/M IMPLANTS TRAY (+ Reamers) (ANC588/I) ANC588/M5 REMOVAL SET If you have to remove FOOTMOTION PLATING SYSTEM implants, make sure to order the Newclip Technics removal set which includes the following instruments: - ANC350: Ø4.5 mm AO quick coupling handle - Size. - ANC575: T8 quick coupling screwdriver NEWCLIP TECHNICS PA de la Lande Saint Martin - 45 rue des Garottières 445 Haute Goulaine (France) Tél. : +33 (0) Fax : +33 (0) orders@newcliptechnics.com SGS UK - US Class: II - Read labeling and instructions before use. FOOTMOTION PLATING SYSTEM INSTRUMENTS Brochure EN - Footmotion Plating System - Ed - 03/06 - Medical device EC : class IIb - FOOTMOTION PLATING SYSTEM INSTRUMENTS Non-contractual pictures IN ST R U M EN TS R EFE R EN CE S

Complex process High costs

MTP With a non sterile standard kit Calling on medical staff Constraints Complex traceability Contracted out sterilization Suppliers deadline Complex process High costs 1 Delivery 2 Storage 3 Unpacking