JNL454 55" STOP. 40kg 88lbs. 140cm. AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England. Leaflet No rev00

Size: px

Start display at page:

Download "JNL454 55" STOP. 40kg 88lbs. 140cm. AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England. Leaflet No rev00"

Marylou Byrd
5 years ago
Views:

1 JNL454 STOP Leaflet No rev00 Read through ALL instructions before coencing installation. If you have any questions about this product or issues with installation contact the customer services helpline before returning this product to the store. See jl.avfgroup.com/p/jnl454 for more information. USTOMER SERVIES HELP LINE NUMBER: kg 88lbs 55" 140cm AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7E, England

2 Assembly Overview 2 Person Installation Recoended Fit the TV Mounting Plate Fit the Wall Bracket onnect the TV

3 Index Measure the TV fixing holes Width and Height Preparing the Front Adaptor Plate Preparing the TV Mounting Plate Fitting the TV Mounting Plate Fitting the Wall Bracket Fitting the Wall Bracket overs onnecting the TV able Management Retain all packaging in case the bracket needs to be returned. ontents may vary from photography/ Illustrations. ou will not need all these parts, so expect there to be some left over depending upon the specification of your TV. This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal injury. It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard and void of any services (eg gas, electricity, water etc). AVF accept no responsibility for any damage or loss caused by installing this product in a sub standard wall.

4 Tools Recoended Stud Finder Ø12 Masonry Ø3 Wood Boxed Parts B A B x4

5 M4 M4 M5 M5 J8 x4 45 M6 J5 x4 M6 J6 x4 J7 x4 H1 x4 H2 x4 I1 x12 I2 x M8 25 M6 J1 x4 J2 x4 J3 x8 J4 x4 M TV Screws, Reducers and Spacers M8 J9 x4 J10 x4 4 M6 E x8 F x8 M6 G x16 K x4 L x4 M x4 N x1

6 1 Measure the TV fixing holes Width and Height X If width X is greater than 400 or height greater than 400 STOP installation now and TV Fixing Holes contact the customer help line ou are provided with 4 diameters of TV fixing screws, M4, M5, M6 and M8. etermine the screw diameter that fits and remember for step 4. M4 = J1/J2 M5 = J3/J4 M6 = J5/J7 M8 = J8-J10 After completing step 4 you will have fittings left over, please keep for future reference Preparing the Front Adaptor Plate Top J M5 J3 x4

7 3 Preparing the TV Mounting Plate Use the option that fits your TV o not fully tighten OPTION 1 OPTION 2 X X X X X X X X X X X X If in any doubt please call the customer help line. OPTION 1 X If your TV fixing holes match any of the sizes shown above you will not need to use any adaptors. Please go to step 4.

8 SLOTS / FENTES OPTION 2 HOLES TROUS When attaching adaptors you must always use HOLES x4 and either of the SLOTS. HOLES TROUS SLOTS / FENTES Top G Example shown is 400 x 400 fixings. F E M6 M6 E x8 F x8 G x16 = HOLES = SLOTS X 300 X

9 = HOLES = SLOTS X 300 X X 400 X X X Adaptors can be fixed in different positions in the slots on Plate to match your TV fixing holes.

10 4 Fitting the TV Mounting Plate Before you fully tighten the TV mounting plate please check that the mounting plate holes line up with the fixing holes on the back of your TV. Holes do not line up and small adjustment is required before you fully tighten Holes line up and no adjustment is required before you fully tighten No Spacers Spacers I1/I2 For Tvs with flat/unobstructed back For Tvs with irregular/obstructed back WARNING TV TV TV TV After completing step 4 you will have fittings left over, please keep for future reference

11 Top J1-J10 H2 Screw diameter dependant H1 I2 If required I1 Fixings shown are valid for options 1 & 2 M4 If required J1/J2 x4 M5 M6 H2 x4 J3/J4 x4 J5/J7 x4 H1 x4 H1 x4 H1 x4 I2 x4 and / or I2 x4 and / or I1 x4 J8-J10 x4 I2 x4 and / or I1 x4 M8 I2 x4 and / or I1 x4 I1 x4 Attach the bracket to the back of your TV using suitable screw, reducer and spacer combinations.

12 5 Remove dust from hole A Solid Wall Fitting the Wall Bracket A 80 (31/8") Ø12 (o not use ½" drill bit) Ensure bracket is in the centre of the wood stud 80 (31/8") Ø3 Take care Take care Wood Stud

13 K x4 O NOT over tighten screws L x4 Tighten screws by hand only O NOT over tighten screws Tighten screws by hand only Lubricate screw thread with soap A K Lubricate screw thread with soap L 8 (5/16") MAX K A K x4

14 6 Fitting the Wall Bracket overs B B 7 onnecting the TV Attaching and Locking

15 8 able Management Ensure cables don t restrict arm movement M M heck all fittings are tight M x4

16 Optional Lock Tilt x4 4 N x1 TV Levelling

The Bowflex Conquest Home Gym Assembly Instructions

The Bowflex Conquest Home Gym Assembly Instructions P/N 001-6841 Rev C (04/2007) Table of Contents Before You Start... 2 Tools You Will Need / Hardware Chart... 3 Parts List... 4 Weight and Multi-carton