Mechanically actuated valves
|
|
|
- Easter Carson
- 5 years ago
- Views:
Transcription
1 Mechanically actuated valves /2-5/2 spool valves with /8 NPT threaded ports Installation in any position Comprehensive range of actuations, direct or servo-piloted Special versions on request Materials Body: aluminium S End cups: aluminium S Springs: stainless steel Seals: NBR Spool: nickel plated aluminium Internal parts: brass OT58 ATEX valves are only in aluminium. Nominal diameter Temperature range Operating pressure Actuating force (where not otherwise stated) Fluid direct actuation bar (Vacuum PSI) MPa direct actuation 5 mm (0.2 in) max +60 C (40 F) servo-piloted actuation bar ( PSI) MPa servo-piloted actuation ~40 N ~4 N 50µ filtered, lubricated or non lubricated air 48
2 Mechanically actuated valves US2 MP /2 /8 NPT tappet - spring return Actuating force: 2.6 N US52 MP 5/2 /8 NPT tappet - spring return Actuating force: 2.6 N US2 2P /2 /8 NPT double tappet ONLY ALUMINIUM VERSION 49
3 Mechanically actuated valves US52 2P 5/2 /8 NPT double tappet ONLY ALUMINIUM VERSION US2 CP /2 /8 NPT tappet - separate pneumatically piloted return US52 CP 5/2 /8 NPT tappet - separate pneumatically piloted return 50
4 Mechanically actuated valves US2 MPS /2 /8 NPT N/C servo-piloted tappet - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 PSI) P : 0 bar (45 PSI) F: 4.5 N F: 4.2 N US2 MPSA /2 /8 NPT N/O servo-piloted tappet - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 PSI) P : 0 bar (45 PSI) F: 4.5 N F: 4.2 N ONLY ALUMINIUM VERSION US52 MPS 5/2 /8 NPT servo-piloted tappet - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 PSI) P : 0 bar (45 PSI) F: 4.5 N F: 4.2 N 5
5 Mechanically actuated valves US2 2PS /2 /8 NPT double servo-piloted tappet ONLY ALUMINIUM VERSION US52 2PS 5/2 /8 NPT double servo-piloted tappet ONLY ALUMINIUM VERSION US2 MR /2 /8 NPT roller lever - spring return ø. / ø = 8 = Actuating force: 9.8 N
6 Mechanically actuated valves US52 MR 5/2 /8 NPT roller lever - spring return /8 ø. = 8 = 5.75 = 8 = = 4 = ø = 8 = Actuating force: 9.8 N 2 22 US2 MRU /2 /8 NPT uni-directional lever - spring return Actuating force: 9.8 N US52 MRU 5/2 /8 NPT uni-directional lever - spring return Actuating force: 9.8 N 5
7 Mechanically actuated valves US2 MRS /2 /8 NPT N/C servo-piloted roller lever - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 PSI) F:.6 N F:.4 N P : 0 bar (45 PSI) US2 MRSA /2 /8 NPT N/O servo-piloted roller lever - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 psi) P : 0 bar (45 psi) F:.6 N F:.4 N ONLY ALUMINIUM VERSION US52 MRS 5/2 /8 NPT servo-piloted roller lever - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 PSI) F:.6 N F:.4 N P : 0 bar (45 PSI) 54
8 Mechanically actuated valves US2 MN /2 /8 NPT N/C servo-piloted whisker - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 psi) P : 0 bar (45 psi) F: 0. N F: 0.8 N US2 MNA /2 /8 NPT N/O servo-piloted whisker - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 psi) P : 0 bar (45 psi) F: 0. N F: 0.8 N ONLY ALUMINIUM VERSION US52 MN 5/2 /8 NPT servo-piloted whisker - air and spring return Actuating force related to inlet pressure P : 2.5 bar (6 psi) P : 0 bar (45 psi) F: 0. N F: 0.8 N 55
9 /2-5/2-5/ spool valves with /8 NPT-/4 NPT threaded ports Installation in any position Comprehensive range of actuations Push/pull and lever valves: thread for panel mounting M8x.5 Version for actuator for panel mounting (with ø22 hole) Special versions on request /8 Materials Body: aluminium S End cups: aluminium S Springs: stainless steel Seals: NBR Spool: nickel plated aluminium Internal parts: brass OT58 /4 ATEX valves are only in aluminium. Nominal diameter Temperature range Operating pressure Actuating force /8 NPT mono-stable 5 N direct actuation bar (Vacuum PSI) MPa /4 NPT mono-stable 20 N /8 NPT: 5 mm /4 NPT: 7.5 mm max +60 C (40 F) 0 N servo-piloted actuation bar ( PSI) MPa /8 NPT bi-stable /4 NPT bi-stable 5 N Fluid 50µ filtered, lubricated or non lubricated air 56
10 US2 ML90 /2 /8 NPT 90 lever - spring return US52 ML90 5/2 /8 NPT 90 lever - spring return 57
11 US2 LL90 /2 /8 NPT 90 bi-stable lever US52 LL90 5/2 /8 NPT 90 bi-stable lever 58
12 US2 CL90 /2 /8 NPT 90 lever - separate pneumatically piloted return US52 CL90 5/2 /8 NPT 90 lever - separate pneumatically piloted return 59
13 US52C ML90 US52A ML90 US52P ML90 closed centers open centers pressurized centers 5/ /8 NPT 90 lever - spring return to center US52C LL90 US52A LL90 US52P LL90 closed centers open centers pressurized centers 5/ /8 NPT 90 lever - three detented positions 60
14 US2 MT /2 /8 NPT push/pull with spring return Standard push button: BLACK On request RED push button US52 MT 5/2 /8 NPT push/pull with spring return Standard push button: BLACK On request RED push button US2 TT /2 /8 NPT bi-stable push/pull Standard push button: BLACK On request RED push button 6
15 US52 TT 5/2 /8 NPT bi-stable push/pull Standard push button: BLACK On request RED push button US2 CT /2 /8 NPT push/pull with separate pneumatically piloted return The return can be done only with pneumatic pilote signal. Standard push button: BLACK On request RED push button US2 CTT /2 /8 NPT bi-stable push/pull with separate pneumatically piloted return The return can be done with pneumatic pilote signal or by pulling the knob. Standard push button: BLACK On request RED push button 62
16 US52 CT 5/2 /8 NPT push/pull with separate pneumatically piloted return The return can be done only with pneumatic pilote signal. Standard push button: BLACK On request RED push button US52 CTT 5/2 /8 NPT bi-stable push/pull with separate pneumatically piloted return The return can be done with pneumatic pilote signal or by pulling the knob. Standard push button: BLACK On request RED push button 6
17 US2 LL /2 /8 NPT bi-stable top lever Manually actuated valves US52 LL 5/2 /8 NPT bi-stable top lever 64
18 US22 ML90 /2 /4 NPT 90 lever - spring return Manually actuated valves US522 ML90 5/2 /4 NPT 90 lever - spring return 65
19 US22 LL90 /2 /4 NPT 90 bi-stable lever Manually actuated valves US522 LL90 5/2 /4 NPT 90 bi-stable lever 66
20 US22 CL90 /2 /4 NPT 90 lever - separate pneumatically piloted return US522 CL90 5/2 /4 NPT 90 lever - separate pneumatically piloted return 67
21 US522C ML90 US522A ML90 US522P ML90 closed centers open centers pressurized centers 5/ /4 NPT 90 lever - spring return to center US522C LL90 US522A LL90 US522P LL90 closed centers open centers pressurized centers 5/ /4 NPT 90 lever - three stable positions 68
22 US22 MT /2 /4 NPT push/pull with spring return Standard push button: BLACK On request RED push button US522 MT 5/2 /4 NPT push/pull with spring return Standard push button: BLACK On request RED push button US22 TT /2 /4 NPT bi-stable push/pull Standard push button: BLACK On request RED push button 69
23 US522 TT 5/2 /4 NPT bi-stable push/pull Standard push button: BLACK On request RED push button US22 CT /2 /4 NPT push/pull with separate pneumatically piloted return The return can be done only with pneumatic pilote signal. US22 CTT /2 /4 NPT bi-stable push/pull with separate pneumatically piloted return The return can be done with pneumatic pilote signal or by pulling the knob. 70
24 US522 CT 5/2 /4 NPT push/pull with separate pneumatically piloted return The return can be done only with pneumatic pilote signal. US522 CTT 5/2 /4 NPT bi-stable push/pull with separate pneumatically piloted return The return can be done with pneumatic pilote signal or by pulling the knob. 7
25 US22 LL /2 /4 NPT bi-stable top lever US522 LL 5/2 /4 NPT bi-stable top lever 72
26 Spare parts for manually actuated spool valves. Cover for dust protection 2. Spool: aluminium S, nickeled. Spacer: brass 4. Seal for spool: NBR 5. Spring: steel code of kit suitable for US2 LL US2 LL90 US2 ML90 US2 TT US2 MT US52 LL US52 LL90 US52 ML90 US52C LL90 US52A LL90 US52P LL90 US52C ML90 US52A ML90 US52P ML90 US52 TT US52 MT US22 LL US22 LL90 US22 ML90 US22 TT US22 MT US522 LL US522 LL90 US522 ML90 US522C LL90 US522A LL90 US522P LL90 US522C ML90 US522A ML90 US522P ML90 US522 TT US522 MT The kit contains the seals listed here and the necessary O-Rings for the functioning of the valve. 7
27 US2 MB /2 /8 NPT N/C servo-piloted tappet with actuator adaptor for panel mounting - air and spring return US2 MBA /2 /8 NPT N/O servo-piloted tappet with actuator adaptor for panel mounting - air and spring return ONLY ALUMINIUM VERSION US52 MB 5/2 /8 NPT servo-piloted tappet with actuator adaptor for panel mounting - air and spring return
28 US2 MB90 /2 /8 NPT N/C servo-piloted tappet with 90 actuator adaptor for panel mounting - air and spring return US2 MBA90 /2 /8 NPT N/O servo-piloted tappet with 90 actuator adaptor for panel mounting - air and spring return ONLY ALUMINIUM VERSION US52 MB90 5/2 /8 NPT servo-piloted tappet with 90 actuator adaptor for panel mounting - air and spring return
29 US2 BB90 /2 /8 NPT double servo-piloted tappets with 90 actuator adaptor for panel mounting ONLY ALUMINIUM VERSION US52 BB90 5/2 /8 NPT double servo-piloted tappets with 90 actuator adaptor for panel mounting ONLY ALUMINIUM VERSION single adaptor for panel mounting actuator, complete with fixing screws double adaptor for panel mounting actuator, complete with fixing screws 80
VAL-212. Super X Manually & mechanically actuated spool valve In-line 3/2, 5/2 & 5/3, 1/8" & 1/4" NPT VALVES. 1/8" NPT 3/2 Mechanical Valves
3/, 5/ & 5/3, /8" & /4" NPT PRODUCTS FOR SAFE SYSTEMS* Wide range of operators Suitable for multi-directional flow and dual supply applications High flow capacity Lightweight corrosion resistant materials
Control Panel Regulators
Control Panel Regulators Modular design for service & interchangeability Non-rising adjustment knob with push-pull lock ring feature Small package size and light weight construction Competitively priced
FITTINGS. Pneufit C composite and Pneufit M fittings Inch Ø 1/8" to 1/2" O/D tube
Pneufit C composite and Pneufit M fittings Ø 1/8" to 1/2" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer).
Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M.
Pneufit C composite and Pneufit M fittings Ø Â" to Ë" Ready to use. Over 1,000 composite push-in pneumatic fittings. Releasable stainless-steel grab-ring to grip nylon or polyurethane (85 or 95 durometer).
SUMMARY UNITS INTRODUCTION PAGE 2-4 KEY TO CODES PAGE 2-7 FILTER PAGE 2-8 DEPURATOR PAGE 2-11 ACTIVE CARBON FILTER PAGE 2-14.
SUMMARY INTRODUCTION PAGE - KEY TO CODES PAGE -7 FILTER PAGE -8 DEPURATOR PAGE - SUMMARY Syntesi ACTIVE CARBON FILTER PAGE - REGULATOR PAGE -7 IN-SERIES REGULATOR PAGE - FILTER-REGULATOR PAGE - LUBRICATOR
VALVES. Nugget 200 Spool Valves 1/4", 3/8", 1/2" NPT Air Pilot Actuated 3/2, 5/2, & 5/3 Inline Valves
Nugget 00 Spool Valves 1/", 3/8", 1/" NPT Air Pilot Actuated 3/, 5/, & 5/3 Inline Valves Long lasting spool design High flow compact valves Three functional types: available in 3/, 5/, and 5/3 configurations
In-Line Accessories. In-Line Pressure Gauges. Pressure Gauges. In-Line Accessories
Pressure Gauges Pressure gauges for monitoring system pressure Hoses and test points for sampling oil and determining ISO cleanliness levels Flanges to connect components Valves for system control In-Line
12 series (Pneufit) Push-in fittings
> > Port size: Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Positive tube anchorage > > ll taper threads
Needle Valves Catalog 4110-NV December 2010
Needle Valves Catalog 4110-NV December 2010 Series Needle Valves Catalog 4110-NV Introduction Parker Series nion onnet Valves have been engineered for use at pressures up to 6,000 (414 bar) and temperatures
ROTARY UNION 9000 SERIES GENERAL PURPOSE MODELS ADDED MODELS ADDED. Operating Parameters FEATURES & BENEFITS MEDIA PRESSURE* TEMPERATURE* SPEED*
ROTARY UNION 9 SERIES GENERAL PURPOSE Operating Parameters Steam, Hot Oil, Water MEDIA PRESSURE* 25 psi (Water), 75 psi (Steam), psi (Hot Oil) MODELS ADDED MODELS ADDED TEMPERATURE* 6 F (Hot Oil), 378
MFD Filters (MGF Series) 8.3. MFD Mini Regulators (MSR Series) 8.4. MFD General Purpose Regulators (MGR Series) 8.5
ir Preparation Equipment MFD Filters (MGF Series) 8.3 MFD Mini Regulators (MSR Series) 8.4 MFD General Purpose Regulators (MGR Series) 8.5 MFD General Purpose Lubricators (MGL Series) 8.6 MFD Filter -
P SERIES. 250 psi NFPA Pneumatic Cylinder TECHNICAL BROCHURE. Bore Sizes from 11/2 to 14
Actuation Solutions and Systems for the P SERIES 250 psi NFPA Pneumatic Cylinder Bore Sizes from 11/2 to 14 Actuation Solutions and Systems for the Design & Materials Temperature Ratings Low Temp. -54
AIR PREPARATION UNITS 3/4" NPT & 1" NPT SERIES
PNEUMATIC GROUP AIR PREPARATION UNITS 3/" NPT & " NPT SERIES 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 83 6 0, 0,6 0, 0,8 8 0,0 0 0 bar 6 0, 0,6 0, 0,8 0,0 0 0 bar 8 Port size Recommended
INTEGRAL-BONNET NEEDLE VALVES H-300 SERIES
INTEGRAL-BONNET NEEDLE VALVES SERIES INTEGRAL-BONNET NEEDLE VALVES SERIES FEATURES n Straight and angle pattern n Stainless Steel and Brass construction n MAWP 5000 psi (345 bar) n MAWT 446 F (230 C) n
12 series (Pneufit) Push-in fittings Ø 1/8... 1/2, Ø mm tube size, BSP and NPT threads
2 series (Pneufit) Push-in fittings Ø /8... /2, Ø 4... 2 mm tube size, SP and NPT threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage ll taper
service Quality Delivery NorgrenExpress.com EXPrEss PLUS M/50 switches Mounts c/ Ø 25 to 63 mm ACT-31
M/50 switches switch P/N cable Material type M/50/lsU/*v pvc reed led M/50/eaN/*v pvc solid state sinking (NpN) led M/50/eap/*v pvc solid state sourcing (pnp) led Mounts bore Foot Mounts center support
Compressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
AIR PREPARATION uality DOES matter!
Qu ali ty DO E AIR PREPARATION S m at! r te AIR FILTER-REGULATOR-LUBRICATOR COMBINATION NAC 2000 01 D Model Range Body Size Port Size Manual Drain 2000 01: 1/8 NPT D Auto Drain 3000 02: 1/4 NPT 4000 03:
In-Line Check Valves. Features. Valves. Working Pressures to: Flow Ranges to:
Valves In-Line Check Valves Working Pressures to: Flow Ranges to: 5700 psi/393 bar 200 gpm 757 lpm Features Steel constructed check valves are compatible with all non-corrosive liquids. Valves contain
AG INTERCHANGE IR I IRV I IRS SERIES POPPET INTERCHANGE COUPLERS Ag Style Interchange
G INTERCHNGE IR I IRV I IRS SERIES POPPET INTERCHNGE COUPLERS g Style Interchange The griculture IR Series Hydraulic Quick Couplings offer automatic shut-off during disconnection. The IR features a variety
Compressor Accessories
Compressor Accessories Series 11 Superior quality for superior performance COMPRESSOR OIL Description MINERAL 11.1100 1 litre container 11.1400 4 litre container SYNTHETIC 11.1200 1 litre container 11.1500
Check Valves PRODUCT DESCRIPTION FEATURES & BENEFITS TECHNICAL SPECIFICATIONS
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
TECHNICAL SPECIFICATIONS. Carbon Steel / Stainless Steel One piece design BALL. Stainless Steel MAXIMUM OPERATING TEMPERATURE CRACKING PRESSURE
Check Valves PRODUCT DESCRIPTION CPI check valves are designed for high pressure applications where reverse flow and leakage must be kept to a minimum. Typical applications include engine, pump and compressor
RLS /M MX SERIES
The RLS/M MX series of burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above
Misc: Interchange Coupling
Wing Style Interchange Coupling Misc: Interchange Coupling Series: W Interchange: Parker 6100 - Seals: Nitrile - Threaded sleeve allows connection/disconnection under pressure - Coupler: brass material
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator
Ross Brown Sales Pty. Ltd. Portable Pressure/Vacuum Comparator The data provided above is for information purposes only and no warranty of accuracy or reliability is given. Page 17 of 30 Pressure Generating
Air Preparation Equipment
FRLS Improve system efficiency Side-by-side and stacking units available Modular design for easy connection and maintenance Variety of port sizes from #10-30 to 1" NPT pp. 170-174 FILTERS Capture solid
components IC, PB PSCK Pressure switches Digital pressure gauges Pressure gauges GA, GS NV, FM Gauge accessories A, AH/R HLS, H, T
Pressure switches t series IC, PB PSCK t page 188 Digital pressure gauges DG 189 Pressure gauges Gauge accessories Manifolds, couplers, hoses, tubing G GA, GS NV, FM A, AH/R HLS, H, T 190 191 192 High
Cam & Groove Fittings. King Nipples
Cam & Groove Fittings King Nipples Index Aluminum Type A, Male Adapter x Female NPT...3 Type B, Female Coupler x Male NPT...3 Type C, Female Coupler x Hose Shank...4 Type D, Female Coupler x Female NPT...4
Interchange Coupling. Poppet: Interchange Coupling
griculture Overview Stucchi griculture Series couplings are offered with a choice of either ball or poppet valve mechanisms for automatic shut-off during disconnection. The ball mechanism is the IR series,
JNL454 55" STOP. 40kg 88lbs. 140cm. AVF Group Ltd. Hortonwood 30, Telford, Shropshire, TF1 7YE, England. Leaflet No rev00
JNL454 STOP Leaflet No. 465391 rev00 Read through ALL instructions before coencing installation. If you have any questions about this product or issues with installation contact the customer services helpline
Table of Contents. Mark 3, SPA 3 & PA 3 Series
Table of Contents...3-9 NSI Symbols... 3 Technical and Operating Data.... How to Order....5-6 Valve with ase....7-8 Manifold lock ssembly...9-0 Sandwich ressure Regulator.... Regulator Service Kits....
Description. Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings
Specifications and Ordering Information Proximitor Sensor / interface module/ VDC Housings R Description Although Proximitor and interface are rugged by design, these units and their electrical connections
RLS /M MX SERIES
RLS/M burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above all, more flexible.
needle valves 3700, 3800, 3900 Series Forged Body, Integral Bonnet Needle Valves
orged ody, Integral onnet Needle Valves Offered in four different body materials, this group of valves can handle a wide range of general purpose liquid and gas applications. Six types of stem tips are
FasMate Quick Connectors Industry Applications:
FasMate Quick Connectors Industry Applications: The FasMate Series instantly seals threaded ports from vacuum up to 344.7 bar. The patented proprietary design makes sealing threaded ports as easy as 1,
RBL High-pressure AISI 316L stainless steel. For all fluids
RBL High-pressure AISI 316L stainless steel For all fluids Connections in high-pressure circuits carrying corrosive liquids and gases... Applications - High-pressure hydrogen circuits - High-pressure circuits
Installation, operation and service manual BMA 05
BMA 05 Please read this manual carefully before installing and using the BMA 05 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
Plant, components and devices for very high and high pressures (7000 bar and over)
Plant, components and devices for very high and high pressures (7000 bar and over) VALVES AND FITTINGS UP TO 1035 BAR MATERIALS All fittings are manufactured from EN 1.4404 / AISI 316L stainless steel
300 PRO FILTER VALVE OPERATING MANUAL. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0028 Rev.
300 PRO FILTER VALVE OPERATING MANUAL S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0028 Rev. C Pag 1 di 27 300 PRO FILTER SERVICING MANUAL Document Revision Revision Note Date MAN0028
injections. Needle Tip 1 µl Cone 1BR
s General Purpose Manual s 0.5-5 µl Nano With the ability to inject down to 50 nl with high precision and accuracy, SGE Nano s are perfect for Nano capillary chromatography injection as well as making
Contents. Coming soon from Teryair!!
Technical products for the ship suppl y industry Contents Teryair is a specialist manufacturer of precision pneumatic tools and marine industrial equipment. Our factories in Mumbai, India are certified
FILTER REGULATORS AND PARTS
COMPRESSED AIR ACCESSORIES PRICING 5-2017 WWW.RAPIDAIRPRODUCTS.COM 800-954-3310 FILTER REGULATORS AND PARTS 175psi MAX INLET, 0-150psi adjustment range PRICE QUANTITY K93210 INLINE REGULATOR W/GAUGE, 1/4"
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L
C O M P R E H E N S I V E S A F E T Y W I T H A T E X B Y C O N T R O L W E L L The current international regulations for machine manufacturers (94/9/EC) and operators (99/9/EC) prescribe high safety levels.
Flow - diaphragm / limiter
GHM Messtechnik GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49 () 942-9383 - Fax - 33 www.ghm-messtechnik.de info@ghm-messtechnik.de Flow - diaphragm / limiter System Flow Diaphragm limiter Nominal
RLS/E-EV MX SERIES. Low NOx Modulating Dual Fuel Burners FIRING RATES
The RLS/E-EV MX series of burners covers a firing range from 350 to 2400 kw, and they have been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil
Air Preparation Equipment
rochure ir Preparation quipment Setting a new standard for: Quality Reliability Value lobal ompatibility ilters M Series M ir Preparation quipment M -8-S-W- MOL imensions (mm, except where noted) RKT INLU
Emergency Fixtures Replacement Parts. Classic Model Parts. Eyewash Bowls. Dust Caps. Sprayhead and Spray Ring Assemblies
Classic Model Parts Eyewash Bowls Dust Caps 154-058 Impact-resistant plastic eyewash bowl, 10" diameter 187-053 Corrosion-resistant stainless steel bowl, 10¾" diameter 107-371 Eyewash dust caps only (sold
12 EEx d-conduit Material
12 EEx d-conduit Conduit Fittings Conduit fittings, BMF, with female/male union Series Nominal Ordering code Weight RN2095 BMF 1 1 /2" NPT 461 557 0 0,15 BMF 2 3 461 558 0 0,20 BMF 3 1" NPT 461 559 0 0,28
Needle Gauge. Needle OD (mm) Needle ID (mm)
s LC Manual s Beckman/Altex, Rheodyne, SSI Instruments and Valco Valves s and Borosilicate Glass Barrel Outer Diameter () Scale 5 µl and 10 µl = 6.5 mm, 25 µl to 500 µl = 8 mm, 1 ml = 8.8 mm, 2.5 ml =
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS
ADAPTER IECEx-ATEX, RNC, IP66 / 68, NICKEL PLATED BRASS Anamet IECEx-ATEX adapter fitting, type RNC and RAC, nickel plated brass Type RNC IECEx-ATEX approved 45 or 90 nickel plated brass adapter, male
RUBBER WATERBLAST HOSES
up to 15, PSI (1 Bar) RUBBER WATERBLAST HOSES These high pressure hose assemblies combine rugged construction, dependability and safe performance. Designed specifically for waterblast applications Lightweight
Fendall Pure Flow 1000 eyewash station, English Ea
Requirements specify that... suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area... Visit www.osha.gov for complete details and regulation requirements.
Inline Filters (F Series) Catalog 4130-F July 2005
Inline Filters (F Series) Catalog 4130-F July 2005 Catalog 4130-F Introduction Parker are designed for protection of instrumentation systems from undesirable materials. Component changes or repair and
Product Index by Coupler Style & Interchange
Product Index by Coupler Style & Interchange Flat Face Style Series Description Page # A Premier ISO 16028 Interchange Flat Face Coupling In accordance with ISO 16028 for Interchange and Performance. s:
Chainsaw Emak S.p.A.
Chainsaw - Engine Meccanografico RE 005145 C/C Postale 11178423 Partita IVA 00130010358 Codice Fiscale 00130010358 1 / 17 Meccanografico RE 005145 C/C Postale 11178423 Partita IVA 00130010358 Codice Fiscale
V New HGP 20. Standard grippers 7.5. Economical and versatile. Self centring. Choice of gripping action. Standard grippers.
V New HGP 20 Economical and versatile Self centring Choice of gripping action 2004/10 Subject to change Products 2004/2005 1 / 1 Key features HGD HGP 06 HGP... B HGR HGW System product for handling and
Conveyor System MM3. Chain width 83mm MODU System MM3 conveyor is also available in stainless steel. See page DM1.
Conveyor System MM3 Conveyor System MM3 Chain width 83mm MODU System MM3 conveyor is also available in stainless steel. See page DM1. Features Suitable for a wide range of applications. Examples of application
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / VACUUM
BROEN UNIFLEX FITTINGS FOR NON-BURNING 2.0 GASES / ACUUM LAB TABLE OF CONTENTS Content Page Table of Content 2 Product Overview 3 BROEN UniFlex TM BASIC 4-5 Fittings for Non-burnig 2.0 Gases/acuum Turret
HE Manual On/Off Valves D Series, NPT Technical Data
HE Manual On/Off Valves D Series, NPT Technical Data Function Flow rate 000 6500 l/min Temperature range 0 +60 C Operating pressure 0 6bar 3/2-way manual shut-off valve The unit is vented when switched
RLS /E-EV MX SERIES
RLS 300 800/E-EV MX SERIES RLS/E-EV MX series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier,
DURASEAL. High Integrity, Double Block and Bleed Plug Valve.
DURASEAL High Integrity, Double Block and Bleed Plug Valve www.franklinvalve.com How the DuraSeal Works An improved valve with a proven history We took an alternative path. Unlike many valve manufacturers
Needle Valves. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION NEEDLE VALVES SD range of Needle valves come in various sizes, sealing styles, end connections and stem types. They are available in bar stock
3/4" NPT 3080 MF 185-3/4-US 1" NPT 3080 MF US
Port size Recommended flow Page No. (l/min) 1/8" NPT 125 MF 007-1/8-US 111-112 1/4" NPT 125 MF 007-1/4-US 1/8" NPT 200 MF 012-1/8-US 113-114 1/4" NPT 200 MF 012-1/4-US 3/8" NPT 200 MF 012-3/8-US 3/8" NPT
PRODUCT EQUIVALENT GUIDE
2" LIGHT WEIGHT MINING REFUELLING NOZZLES BNM800L 2" Nozzle with light shut down pressure (25-35kPa@ 400LPM) (Includes Plug & Spring AUS21A029) BNM800ML 2" Nozzle with medium light shut down pressure (45-55kPa@
SE Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: SHOWER FEATURES FINISH: OPTIONS: WARRANTY:
Optimus Combination Shower and Eye And Face Wash System EYEWASH FEATURES: Independent eye wash & face wash integrated into one, multi-functioning safety unit. Aerated sprays for eyewash comfort & innovative
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools.
Accessories for LV AirGuard Cables Glands, Connectors and Installation Tools. A Non-Potted Gland TECHNICAL DATA Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444 Mechanical Classifications*
KKE 1500 Capsule weighing machine Replacement spare parts
KKE 1500 Capsule weighing machine Replacement spare parts INTERNATIONAL INVENTORY MANAGEMENT 456 MANNING AVENUE ELON, NC 27244 USA TEL 001 336 584 4777 FAX 001 336 584 4950 410 NORTH 1650 WEST SPRINGVILLE,
Side Channel R ing Blower
Side Channel R ing Blower ------------------------------------- INSTRUCTION MNUL ------------------------------------ RB20../ 30../ 40../ 50../ 60 / 80.. SERIES CONTENT PGE 1. SFETY REQUIREMENT... 1 2.
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 85S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
DEBSON TM2 OXYGEN THERAPY FLOWMETERS WITH PRE ADJUSTED FLOWRATES. English version 09/2015
DEBSON TM2 English version 09/2015 RAIL MOUNTING SYSTEMS 2 DIRECT PROBES 3 DEBSON TM2 The DEBSON TM2 is used to set the of a gas that is to be delivered to patients through the respiratory tract. It is
Crystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 300S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
H Series Pneumatic Screwdrivers and Nutrunners. Products and Solutions for Assembly
H Series Pneumatic Screwdrivers and Nutrunners Products and Solutions for Assembly About We are personally committed to understanding and exceeding our customers requirements. We are committed to continuously
Advanced Research Systems, Inc.
4/17/01 Page 1 Huber Goniometer Interface 6.5K to 800K Closed Cycle Cryostat DESCRIPTION The DE-202G has been designed for applications requiring movement of the refrigerator, specifically for goniometers.
Installation, operation and service manual BMA 04
BMA 04 Please read this manual carefully before installing and using the BMA 04 safe measuring coupling. Wigersma & Sikkema warranty obligations do not apply in case of non-observance of this manual. 1
A Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
THE TOTALLY WICKED TORNADO NC CONGRATULATIONS ON PURCHASING YOUR TOTALLY WICKED TORNADO NC ELECTRONIC CIGARETTE KIT
USER MANUAL THE TOTALLY WICKED TORNADO NC CONGRATULATIONS ON PURCHASING YOUR TOTALLY WICKED TORNADO NC ELECTRONIC CIGARETTE KIT 3 QUICK START GUIDE For those familiar with e-cigarettes, the steps below
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing
Parts Catalog Issued: Oct 22, Aerosol Therapy. Yes, you can.
Parts Catalog Issued: Oct 22, 2009 Aerosol Therapy Yes, you can. Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service
Environmental Submersible Pumps
Environmental Submersible Pumps Grundfos 230S Enviro Retrofitted Submersible Pumps These Grundfos submersible pumps are made of stainless steel and retrofitted with PTFE to handle the rigors of contaminated
D.O.T Fittings. Version 2015
D.O.T Fittings Version 2015 Revised 3/18/2015 Fax your order to: (763) 398-2590. customerservice@polyconn.com. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN 55447
Installation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
Adapters Quick Reference Guide
Adapters Quick Reference Guide Minimizing Downtime in a Variety of Industries Construction Demolition Distribution Equipment Rental Excavation Manufacturing Marine Material Handling Municipalities Recycling
Polyester distribution boxes
for Zone and Zone Description have been of great advantage in many industrial plants. They offer safe protection even when they are exposed to extreme environmental conditions, aggressive chemical media
Crystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
747 Series Stopper Plugs Cable Gland Accessories Flameproof.
747 Series Stopper Plugs Flameproof. Class I, Groups, A, B, C, D Type 4X; Ex d II Component Equipment Stopper plug is designed for use from the outside of the Idea for use on flameproof electrical equipment
RLS/BP MX SERIES. Low NOx Modulating Dual Fuel Burners FIRING RATES. RLS 300/BP MX 600/ kw RLS 400/BP MX 800/ kw DUAL FUEL.
RLS/BP MX series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above all,
SUN VALLEY STOVE COMPANY
LO HI ON PILOT LO HI ON PILOT SUN VALLEY STOVE COMPANY VENT-FREE NATURAL GAS STOVE HEATER ILLUSTRATED PARTS BREAKDOWN MSVFBNR 1 2 6 21 3 7 4 21 11 22 9 12 23 10 13 OFF 1 17 24 14 16 17 1 19 OFF 12 OWNER
EZ Inline Series. Air Control Valves. Section D
Z Inline Series Air ontrol Valves Section www.parker.com/pneu/zinline AX Viking Z asic Valve unctions...2- asic Valve eatures...4-5 Solenoid Operated Valves ommon Part umbers...6 odel umber Index...7 Remote
Parts Catalog Issued: Aug 31, Aerosol Therapy
Parts Catalog Issued: Aug 31, 2016 Aerosol Therapy Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If
RL/B MZ SERIES. Two Stage Light Oil Burners FIRING RATES LIGHT OIL RL 300/B MZ RL 400/B MZ. 600/ kw 1000/ kw
RL/B MZ series burners are characterised by a modular monoblock structure that means all necessary components can be combined in a single unit thus making installation easier, faster and, above all, more
Skydrol Crystal Pressure Fittings CPF
Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections
Tru-Fit 10k Fittings
Tru-Fit 10k Fittings TruFit 10K Pipe and Adapter Fittings are designed and manufactured to provide a reliable connection in high pressure systems running to 10,000 psi. Manufactured from fully-traceable
LKH-10. Connections for FSS and DMSS R1/8"(BSP) male thread.
. kyhe Premium Pump ky LK Centrifugal Pump Applications he LK pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary applications and thus gentle product treatment
Company. Our. Our product range consists of the following groups:
Our Company Bimed begun in 1978 as a manufacturer of medical and mechanical components. Today Bimed is a family owned organization with more than 300 people and a 20,000 square meter facility. The Istanbul,
KneeAlign System Surgical Technique Guide
KneeAlign System Surgical Technique Guide Table of Contents Step 1 System Assembly... 1 Step 2 System Assembly... 2 Step 3 System Assembly... 2 Step 4 System Assembly... 2 Step 5 Sensor Pairing... 2 Step
Modular Structural Parts Knee Joints
Prosthetic knee joint systems are used to replace the missing healthy knee joint. Their design must therefore meet very high technical demands in order to enable the amputee to live a carefree life again.