. Simplification. High Performance. Safety and Longevity. The fundamental goal is to restore the quality of life of patients.

Transcription

1 Catalog

2 4 P-I product line was developed by te Osseointegration pioneer, Professor Per-Ingvar Brånemark, jointly wit experienced scientists in world recognized entities to meet modern implant dentistry demands. To furter complement te P-I portfolio, te company Ospol AB was acquired. Founded in 2002 Sweden, Ospol AB primarily commercialized its products in Europe, delivering outstanding tecnologies. Wit knowledge and based on scientific evidences te main objective of te P-I brand is to offer professionals and patients competitive solutions represented by:. Simplification. Hig Performance. Safety and Longevity Te fundamental goal is to restore te quality of life of patients.

3 5 Content External Hexagon - 7 Amplified - 15 Morse Taper - 2 Kit - 2 Instruments - 6 Accessories - 8 Surgical Sequence - 40 Torques - 42 Please refer to for additional product information. (!) Some products may not be available in your region. Please ceck availability.

4 7 Versatility. External Hexagon Hybrid Implants

5 8 External Hexagon Hybrid Implants HEX-S HEX Surfaces HEX-S Solid Ø Implant HEX Functional Ø Implant (!) (!) (!) Ø4.0 External Hexagon Implants are primarily utilized for rescue (Wen insertion stability is not reaced wit Ø.75). Platform Ø as te same Hexagon of Platform 4.1, allowing use of 4.1 Components (Platform Switcing).

6 9 Soft Tissue Healing HEX-S HEX Healing Abutment Divergent Healing Abutment Parallel Cover Screw Possible use of Ø4.1 Components.

7 10 Conical Abutment Indicated for multiple, screw retained prostesis HEX-S HEX Cylinders Non-Engaging (NEng) Titanium Provisional Castable Cobalt Cromium Molybdenum Analog Impression Copings Open Tray (OT) Multiple Closed Tray (CT) Multiple Healing Cap Conical Abutment - 0º Conical Abutment - 17º Divergent Conical Abutment - Straigt Parallel Ø Platform uses 4.1 Components only. (!) Conical Abutment prostetic Platform is te same in all diameters. (!) Maximum occlusal angulation between two Abutments is 40º.

8 11 Abutment Cemented Cylinder Indicated for single or multiple, cement retained prostesis HEX-S HEX Castable Cylinders Non Engaging (NEng) 6 mm (L) 4 mm Engaging (Eng) 6 mm (L) 4 mm Analogs 6 mm (L) 4 mm Impression Copings Closed Tray (CT) - 6 mm (L) Closed Tray (CT) - 4 mm Healing Caps 6 mm (L) 4 mm Abutment Cemented Cylinder 4 mm Cone Abutment Cemented Cylinder 6 mm (L) Cone Possible use of Ø4.1 Components. Ø Platform uses 4.1 Components only.

9 12 Estetic Abutment Indicated for single or multiple, cement retained prostesis HEX-S HEX Estetic Abutment - 15º Estetic Abutment - Straigt Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø4.1 Components. Ø Platform uses 4.1 Components only.

10 1 Cylinders over Implant Indicated for single or multiple, cemented or screw retained prostesis HEX-S HEX Cylinders over Implant Non-Engaging (NEng) Titanium Provisional Castable Cobalt Cromium Molybdenum Engaging (Eng) Titanium Castable Cobalt Cromium Molybdenum Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø4.1 Components.

11 14 CAD / CAM Solution HEX-S HEX Scan Body Conical Abutment (!) Overdenture Solution Ball Abutment Ø2.5* (!) P-I Interfaces, Links and Scan Bodies are listed in te libraries of te described systems. Please ceck availability in your region. * Ball Abutments, components and instruments are universal and not listed in tis Catalog. Please ceck availability in your region. Ø Platform uses 4.1 Components only.

12 15 Estetics. Bone Level. Amplified Hybrid Implants

13 16 Amplified Hybrid Implants Surfaces AMP-S AMP AMP-S Solid Ø Implant AMP Functional Ø Implant (!) Ø4.1, 4. and Platform ave identical cone and index dimensions allowing intercange of Components.

14 17 Soft Tissue Healing Healing Abutment Divergent AMP-S AMP Healing Abutment Parallel Cover Screw Ø Platform uses Components only.

15 18 Conical Abutment Indicated for multiple and single, screw retained prostesis AMP-S AMP Cylinders Non-Engaging (NEng) Titanium Provisional Castable Cobalt Cromium Molybdenum Engaging (Eng) Titanium Castable Cobalt Cromium Molybdenum Analog Multiple and Single Impression Copings Non-Engaging (NEng) Open Tray (OT) Multiple Closed Tray (CT) Multiple Engaging (Eng) Open Tray (OT) Single Closed Tray (CT) Single Healing Cap Conical Abutment - 0º Multiple Conical Abutment - 17º Multiple Conical Abutment - Straigt Multiple and Single Ø Platform uses Components only. (!) Conical Abutment prostetic Platform is te same in all diameters. (!) Maximum occlusal angulation between two Abutments is 40º.

16 19 Abutment Cemented Cylinder Indicated for single or multiple, cement retained prostesis Castable Cylinders Non-Engaging (NEng) 6 mm (L) 4 mm Engaging (Eng) 6 mm (L) 4 mm AMP-S AMP Analogs 6 mm (L) 4 mm Impression Copings Closed Tray (CT) - 6 mm (L) Closed Tray (CT) - 4 mm Healing Caps 6 mm (L) 4 mm Abutment Cemented Cylinder 4 mm Cone Abutment Cemented Cylinder 6 mm (L) Cone Abutment Cemented Cylinder 0 (!) Possible use of Ø and Components. Ø Platform uses Components only. (!) Not compatible wit Healing, Impression and Cylinders system.

17 20 Estetic Abutment Indicated for single or multiple, cement retained prostesis AMP-S AMP Estetic Abutment - 15º Estetic Abutment - Straigt Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø Components. Ø Platform uses Components only.

18 21 Cylinders over Implant Indicated for single or multiple, cemented or screw retained prostesis Cylinders over Implant Engaging (Eng) Titanium Provisional Cobalt Cromium Molybdenum AMP-S AMP Implant Analogs Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø and Components. Ø Platform uses Components only.

19 22 CAD / CAM Solutions Scan Body Conical Abutment (!) AMP-S AMP Scan Body Implant (!) Links Overdenture Solution Locator Abutment* (!) P-I Interfaces, Links and Scan Bodies are listed in te libraries of te described systems. Please ceck availability in your region. Te Implant Scan Bodies for Amplified and Morse Taper are recommended for single units and use wit Intraoral and Desk Scanners. For multiple prostesis, please consider P-I Conical Abutment Scan Bodies wit universal Platform. *Locator Abutment components and instruments are universal and not listed in tis Catalog. Please ceck availability in your region. Ø Platform uses Components only.

20 2 Morse Sealing. Estetics. Morse Taper Solid Hybrid Implants

21 24 Morse Taper Solid Hybrid Implants Surfaces MT Ø Implant MT (!) Platform Ø.5, 4.1 and ave identical cone and index dimensions allowing intercange of Components.

22 25 Soft Tissue Healing Healing Abutment Divergent Healing Abutment Parallel MT Cover Screw Possible use of Ø.5, 4.1 and Components.

23 26 Conical Abutment Indicated for multiple and single, screw retained prostesis Cylinders Non-Engaging (NEng) Titanium Castable Cobalt Cromium Molybdenum Engaging (Eng) Titanium Castable Cobalt Cromium Molybdenum Analog Multiple and Single MT Impression Copings Non-Engaging (NEng) Open Tray (OT) Closed Tray (CT) Engaging (Eng) Open Tray (OT) Closed Tray (CT) Healing Cap Conical Abutment - 0º Multiple Conical Abutment - 17º Multiple Conical Abutment - Straigt Multiple and Single Ø.5 and Platform use 4.1 Components only. (!) Conical Abutment prostetic Platform is te same in all diameters. (!) Maximum occlusal angulation between two Abutments is 40º.

24 27 Abutment Cemented Cylinder Indicated for single or multiple, cement retained prostesis Castable Cylinders Non-Engaging (NEng) 6 mm (L) 4 mm Engaging (Eng) 6 mm (L) 4 mm Analogs 6 mm (L) 4 mm MT Impression Copings Closed Tray (CT) - 6 mm (L) Closed Tray (CT) - 4 mm Healing Caps 6 mm (L) 4 mm Abutment Cemented Cylinder 4 mm Cone Abutment Cemented Cylinder 6 mm (L) Cone Abutment Cemented Cylinder 0 (!) Possible use of Ø.5, 4.1 and Components. (!) Not compatible wit Healing, Impression and Cylinders system.

25 28 Estetic Abutment Indicated for single or multiple, cement retained prostesis Estetic Abutment - 15º MT Estetic Abutment - Straigt Implant Analog Implant Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø.5 and 4.1 Components. Ø Platform uses.5 or 4.1 Components.

26 29 Contour Abutment (!) Indicated for single or multiple, cement retained prostesis Cylinders Provisional Straigt 17º Castable Straigt 17º Analogs Straigt 17º MT Impression Copings Straigt 17º Contour Abutment Contour Abutment - Straigt Possible use of Ø.5, 4.1 and Abutments. (!) Contour Abutment design above te margin is te same as Zimmer Biomet Contour abutments and is compatible wit Zimmer Contour Restorative components (Not listed in tis Catalog). Please ceck availability in your region.

27 0 Cylinders over Implant Indicated for single or multiple, cemented or screw retained prostesis Cylinders over Implant Engaging (Eng) Titanium Provisional Cobalt Cromium Molybdenum MT Implant Analog Implants Impression Copings Open Tray (OT) Closed Tray (CT) Possible use of Ø.5, 4.1 and Abutments. (!) Castable, overcasting and lab modified Components may present inferior adaptation. Internal and seating structures dimensional integrity and MT sealing cannot be ensured.

28 1 CAD / CAM Solutions Scan Body Conical Abutment (!) Scan Body Implant (!) MT Links Overdenture Solution Locator Abutment* (!) P-I Interfaces, Links and Scan Bodies are listed in te libraries of te described systems. Please ceck availability in your region. Te Implant Scan Bodies for Amplified and Morse Taper are recommended for single units and use wit Intraoral and Desk Scanners. For multiple prostesis, please consider P-I Conical Abutment Scan Bodies wit universal Platform. *Locator Abutment components and instruments are universal and not listed in tis Catalog. Please ceck availability in your region. Ø.5 and Platforms use 4.1 Components only.

29 2 Kit Advanced All Interfaces and Implants Surgical + Prostetic Stainless Steel Polymer Compact Start-up All Interfaces for Implants Ø.75 and 4.0 Surgical + Prostetic Stainless Steel L L 254 mm W H H W 40 mm 10 mm Kits Advanced Start-up Code (!) Advanced Please refer to Kit Composition and additional tray options on

30 Kit Polymer L H W L H W 202 mm 67 mm 158 mm Kits Advanced Start-up Code Please refer to Kit Composition and additional tray options on

31 4 Kit Compact L L 120 mm H W H W 40 mm 80 mm Kits Advanced Start-up Code Please refer to Kit Composition and additional tray options on

32 5 Specialist Kits Specialist Kit* Ø Specialist Kit* Ø Kits Prostetic Kit All Interfaces and Components * Placement of Implant Ø.75 or 4.0 on any Interface. Does not include Torque Wrenc. Includes a andpiece and Squared finising 4x4 Implant Insertion Driver (Medium). (!) Ball Abutment and Locator Instruments are universal and not listed in tis Catalog (Teir Universal instrumentation and tooling are not included in te Kits). Please ceck availability in your region. Please refer to Kit Composition and additional tray options on

33 6 Instruments Implant Insertion Interface Code Drivers HEX AMP MT HEX All (except HEX.5).5 Medium Long Medium Long AMP MT All Medium Long Drivers (Wit Rings) HEX 4.1 Medium Long HEX.5 Medium Long Adapter Implant Insertion Driver (Manual and Torque Wrenc) All 1110 Instruments Drills Ø Drill 2.2 Ø Implant Initial Code Conical Ø Drill Implant Dense Drills Guide Pin (Direction and Dept)

34 7 Instruments Torque Wrenc Surgical + Prostetic Code 1116 Use wit Implant Insertion Driver Adapter and Squared Adapter (4x4). Prostetic Drivers Code Driver Adapter - Squared (4x4)* Hexagonal Driver Ø1.2 Sort Hexagonal Driver Ø1.2 Hexagonal Driver Ø1.2 Conical Abutment Driver Ø2.0 Conical Abutment Driver Ø2.0 Medium Long Sort Medium Instruments Abutment Retriever Code Retriever MT 1111 * Use wit Hexagonal, Conical Abutment and Manual (Squared) Drivers. * Optionally supplied wit permanent Hexagonal and Conical Abutment Drivers (Single piece). Please ceck availability in your region.

35 8 Accessories Code Spade Ø Round Burr Ø Drill Extension Stainless Steel - Tray Accessories Polymer - Tray Compact - Tray Selection Abutment MT MT Healing Abutment MT (Selection) Osstell SmartPegs are available for all P-I Interfaces: HEX and HEX-S Ø.5: Type 8; HEX and HEX-S Ø4.1 and Ø: Type 18 AMP and AMP-S Ø.5: Type 6; AMP and AMP-S Ø4. and Ø: Type 51 MT all Platforms: Type 21. Please ceck availability in your region. Please refer to

36 9 Replacement Laboratory Screws HEX AMP MT Screw Imp. Coping - Implant - OT Screw Imp. Coping - Implant CT Screw Imp. Coping - Conical Abutment OT Screw Imp. Coping - Conical Abutment CT Engaging (Eng) Accessories Screw Conical Abutment Screw Abutment

37 40 Surgical Sequence Drill Marks During all surgical preparation, coordinated in-and-out movement of drills sould be executed Irrigation must be constant and directed to te insertion margin of drills in te surgical site Only use te Torque Wrenc wen at least /4 of te Implant are inserted in surgical site Surgical Sequence ~ 1 mm 50 Ncm Installation of Hybrid Implants sould not exceed 50 Ncm in all clinical cases Wen te Torque Wrenc is used by te torque andle te maximum torque sould not exceed 50 Ncm (!) Read Instructions for Use before installing products. Implant Radiograpic Template available. Implant Insertion Drivers must be completely attaced to Implants during all surgical installation. Movement to correct te direction of Implant sould not be applied as te surgical site was determined by drill direction. Torques in excess of te maximum recommended torque (50 Ncm) and improperly attaced Drivers may cause undesired lock of ring Insertion Drivers. In tese possible cases a sligt manual counter-torque sould be applied to remove te driver. Removal of Drivers from Implants must be done vertically.

38 41 Surgical Sequence Drill r.p.m ,200 Implant Ø. S-N-D.75 S N-D S N-D S S N-D N-D S = Soft N = Normal D = Dense Surgical Sequence Important: during all surgical preparation, te use of Dense Drills sould be considered regardless of Implant type and bone density wit te objective of not exceeding 50 Ncm of torque. Dense cortical bone removal wit Dense Drills must be always performed in low rotation (15 50 r.p.m. Maximum). Dense Drills can be also used to gradually prepare surgical sites (i.e. widening of te cortical region and post extraction sites). (!) Round Burr and Spade Drill are optional. * Optional.

39 42 Torques HEX AMP MT Driver Hybrid Implants Insertion Driver Abutments Cylinders over Implant Links 5* Ø1.2** Cylinders - Conical Abutments Ø1.2 Locator 5 5 Locator Cover Screws Healings Abutments Impression Copings Scan Bodies Manual Manual Manual Ø1.2 Torques Materials and Dimensions For furter information about Implants and Components Materials and Dimensions, please refer to All Components are supplied wit Screws wen applicable. (!) Caution wit cementation procedures sould be practiced to avoid contamination of tissues. Image examination and cecks sould be performed to confirm correct adaptation of Components to Implant Platform. * Except, HEX Ø.5 Components and Angled Conical Abutments = 25 Ncm. ** Except Straigt Conical Abutment, Driver Ø2.0.

40 44 CATALOG-005-ENG SIC invent Sweden AB Stora Åvägen 21, 46 4 Askim - Sweden